이 콘텐츠는 선택한 언어로 제공되지 않습니다.

10.3. Rebooting Ceph Storage Nodes


To reboot the Ceph Storage nodes, follow this process:
  1. Select the first Ceph Storage node to reboot and log into it.
  2. Disable Ceph Storage cluster rebalancing temporarily:
    $ sudo ceph osd set noout
    $ sudo ceph osd set norebalance
  3. Reboot the node:
    $ sudo reboot
  4. Wait until the node boots.
  5. Log into the node and check the cluster status:
    $ sudo ceph -s

    Check that the pgmap reports all pgs as normal (active+clean).
  6. Log out of the node, reboot the next node, and check its status. Repeat this process until you have rebooted all Ceph storage nodes.
  7. When complete, enable cluster rebalancing again:
    $ sudo ceph osd unset noout
    $ sudo ceph osd unset norebalance
  8. Perform a final status check to make sure the cluster reports HEALTH_OK:
    $ sudo ceph status
Red Hat logoGithubRedditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

© 2024 Red Hat, Inc.