Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Using Streams for Apache Kafka on RHEL with ZooKeeper

Red Hat Streams for Apache Kafka 2.9

Configure and manage a deployment of Streams for Apache Kafka 2.9 on Red Hat Enterprise Linux

Abstract

Configure the operators and Kafka components deployed with Streams for Apache Kafka to build a large-scale messaging network.

Preface
링크 복사

Providing feedback on Red Hat documentation
링크 복사

We appreciate your feedback on our documentation.

To propose improvements, open a Jira issue and describe your suggested changes. Provide as much detail as possible to enable us to address your request quickly.

Prerequisite

  • You have a Red Hat Customer Portal account. This account enables you to log in to the Red Hat Jira Software instance.
    If you do not have an account, you will be prompted to create one.

Procedure

  1. Click the following: Create issue.
  2. In the Summary text box, enter a brief description of the issue.

  3. In the Description text box, provide the following information:

    • The URL of the page where you found the issue.
    • A detailed description of the issue.
      You can leave the information in any other fields at their default values.
  4. Add a reporter name.
  5. Click Create to submit the Jira issue to the documentation team.

Thank you for taking the time to provide feedback.

Chapter 1. Overview of Streams for Apache Kafka
링크 복사

Streams for Apache Kafka supports highly scalable, distributed, and high-performance data streaming based on the Apache Kafka project.

The main components comprise:

Kafka Broker
Messaging broker responsible for delivering records from producing clients to consuming clients.
Kafka Streams API
API for writing stream processor applications.
Producer and Consumer APIs
Java-based APIs for producing and consuming messages to and from Kafka brokers.
Kafka Bridge
Streams for Apache Kafka Bridge provides a RESTful interface that allows HTTP-based clients to interact with a Kafka cluster.
Kafka Connect
A toolkit for streaming data between Kafka brokers and other systems using Connector plugins.
Kafka MirrorMaker
Replicates data between two Kafka clusters, within or across data centers.
Kafka Exporter
An exporter used in the extraction of Kafka metrics data for monitoring.

A cluster of Kafka brokers is the hub connecting all these components.

Figure 1.1. Streams for Apache Kafka architecture

Streams for Apache Kafka architecture
View larger image
Streams for Apache Kafka architecture

1.1. Using the Kafka Bridge to connect with a Kafka cluster
링크 복사

You can use the Kafka Bridge API to create and manage consumers and send and receive records over HTTP rather than the native Kafka protocol.

When you set up the Kafka Bridge you configure HTTP access to the Kafka cluster. You can then use the Kafka Bridge to produce and consume messages from the cluster, as well as performing other operations through its REST interface.

1.2. Document conventions
링크 복사

User-replaced values

User-replaced values, also known as replaceables, are shown in with angle brackets (< >). Underscores ( _ ) are used for multi-word values. If the value refers to code or commands, monospace is also used.

For example, the following code shows that <bootstrap_address> and <topic_name> must be replaced with your own address and topic name: 

bin/kafka-console-consumer.sh --bootstrap-server <broker_host>:<port> --topic <topic_name> --from-beginning
Copy to Clipboard Toggle word wrap

Chapter 2. FIPS support
링크 복사

Federal Information Processing Standards (FIPS) are standards for computer security and interoperability. To use FIPS with Streams for Apache Kafka, you must have a FIPS-compliant OpenJDK (Open Java Development Kit) installed on your system. If your RHEL system is FIPS-enabled, OpenJDK automatically switches to FIPS mode when running Streams for Apache Kafka. This ensures that Streams for Apache Kafka uses the FIPS-compliant security libraries provided by OpenJDK.

Minimum password length

When running in the FIPS mode, SCRAM-SHA-512 passwords need to be at least 32 characters long. If you have a Kafka cluster with custom configuration that uses a password length that is less than 32 characters, you need to update your configuration. If you have any users with passwords shorter than 32 characters, you need to regenerate a password with the required length.

2.1. Installing Streams for Apache Kafka with FIPS mode enabled
링크 복사

Enable FIPS mode before you install Streams for Apache Kafka on RHEL. Red Hat recommends installing RHEL with FIPS mode enabled, as opposed to enabling FIPS mode later. Enabling FIPS mode during the installation ensures that the system generates all keys with FIPS-approved algorithms and continuous monitoring tests in place.

With RHEL running in FIPS mode, you must ensure that the Streams for Apache Kafka configuration is FIPS-compliant. Additionally, your Java implementation must also be FIPS-compliant.

Note

Running Streams for Apache Kafka on RHEL in FIPS mode requires a FIPS-compliant JDK.

Procedure

  1. Install RHEL in FIPS mode.

    For further information, see the information on security hardening in the RHEL documentation.

  2. Proceed with the installation of Streams for Apache Kafka.

  3. Configure Streams for Apache Kafka to use FIPS-compliant algorithms and protocols.

    If used, ensure that the following configuration is compliant:

    • SSL cipher suites and TLS versions must be supported by the JDK framework.
    • SCRAM-SHA-512 passwords must be at least 32 characters long.
Important

Make sure that your installation environment and Streams for Apache Kafka configuration remains compliant as FIPS requirements change.

Chapter 3. Getting started
링크 복사

Streams for Apache Kafka is distributed in a ZIP file that contains installation artifacts for the Kafka components.

Note

The Kafka Bridge has separate installation files. For information on installing and using the Kafka Bridge, see Using the Streams for Apache Kafka Bridge.

3.1. Installation environment
링크 복사

Streams for Apache Kafka runs on Red Hat Enterprise Linux. The host (node) can be a physical or virtual machine (VM). Use the installation files provided with Streams for Apache Kafka to install Kafka components. You can install Kafka in a single-node or multi-node environment.

Single-node environment
A single-node Kafka cluster runs instances of Kafka components on a single host. This configuration is not suitable for a production environment.
Multi-node environment
A multi-node Kafka cluster runs instances of Kafka components on multiple hosts.

We recommended that you run Kafka and other Kafka components, such as Kafka Connect, on separate hosts. By running the components in this way, it’s easier to maintain and upgrade each component.

Kafka clients establish a connection to the Kafka cluster using the bootstrap.servers configuration property. If you are using Kafka Connect, for example, the Kafka Connect configuration properties must include a bootstrap.servers value that specifies the hostname and port of the hosts where the Kafka brokers are running. If the Kafka cluster is running on more than one host with multiple Kafka brokers, you specify a hostname and port for each broker. Each Kafka broker is identified by a node.id.

3.1.1. Data storage considerations
링크 복사

Apache Kafka stores records in data logs, which are configured using the log.dirs property. For more information, see Section 5.4.3, “Data logs”.

Efficient data storage is essential for Strimzi to operate effectively, and block storage is strongly recommended. Strimzi has been tested only with block storage, and file storage solutions like NFS are not guaranteed to work.

Common block storage types supported by Kubernetes include:

  • Cloud-based block storage solutions:

    • Amazon EBS (for AWS)
    • Azure Disk Storage (for Microsoft Azure) **Persistent Disk (for Google Cloud)
  • Persistent storage (for bare metal deployments) using local persistent volumes
  • Storage Area Network (SAN) volumes accessed by protocols like Fibre Channel or iSCSI

3.1.2. File systems
링크 복사

Kafka uses a file system for storing messages. Streams for Apache Kafka is compatible with the XFS and ext4 file systems, which are commonly used with Kafka. Consider the underlying architecture and requirements of your deployment when choosing and setting up your file system.

For more information, refer to Filesystem Selection in the Kafka documentation.

3.1.3. Disk usage
링크 복사

Solid-state drives (SSDs), though not essential, can improve the performance of Kafka in large clusters where data is sent to and received from multiple topics asynchronously.

Note

Replicated storage is not required, as Kafka provides built-in data replication.

3.1.4. Apache Kafka and ZooKeeper storage
링크 복사

Use separate disks for Apache Kafka and ZooKeeper.

Kafka supports JBOD (Just a Bunch of Disks) storage, a data storage configuration of multiple disks or volumes. JBOD provides increased data storage for Kafka brokers. It can also improve performance.

Solid-state drives (SSDs), though not essential, can improve the performance of Kafka in large clusters where data is sent to and received from multiple topics asynchronously. SSDs are particularly effective with ZooKeeper, which requires fast, low latency data access.

Note

You do not need to provision replicated storage because Kafka and ZooKeeper both have built-in data replication.

3.2. Downloading Streams for Apache Kafka
링크 복사

A ZIP file distribution of Streams for Apache Kafka is available for download from the Red Hat website. You can download the latest version of Red Hat Streams for Apache Kafka from the Streams for Apache Kafka software downloads page.

  • For Kafka and other Kafka components, download the amq-streams-<version>-kafka-bin.zip file

  • For Kafka Bridge, download the amq-streams-<version>-bridge-bin.zip file.

    For installation instructions, see Using the Streams for Apache Kafka Bridge.

3.3. Installing Kafka
링크 복사

Use the Streams for Apache Kafka ZIP files to install Kafka on Red Hat Enterprise Linux. You can install Kafka in either a single-node or multi-node environment. This procedure focuses on installing a single Kafka instance on a single host (node). For this setup, Kafka is installed in the /opt/kafka/ directory, and a dedicated Kafka user (kafka) is used to manage the installation.

The Streams for Apache Kafka installation files include the binaries for running other Kafka components, like Kafka Connect, Kafka MirrorMaker 2, and Kafka Bridge. In a single-node environment, you can run these components from the same host where you installed Kafka. However, we recommend that you add the installation files and run other Kafka components on separate hosts.

Apache ZooKeeper provides a cluster coordination service for highly reliable distributed coordination. Kafka uses ZooKeeper for storing configuration data and for cluster coordination. Before running Kafka, a ZooKeeper cluster has to be ready.

Note

If you are using a multi-node environment, you install Kafka brokers and ZooKeeper instances on more than one host. Repeat the installation steps for each host. To identify each ZooKeeper instance and broker, you add a unique ID in the configuration. For more information, see Chapter 4, Running a multi-node environment.

Prerequisites

Procedure

Install Kafka with ZooKeeper on your host.

  1. Add a new Kafka user and group: 

    groupadd kafka
useradd -g kafka kafka
passwd kafka
    Copy to Clipboard Toggle word wrap

    This step creates the necessary user and group for managing Kafka.

  2. Extract and move the contents of the amq-streams-<version>-kafka-bin.zip file and place it in the /opt/kafka directory: 

    unzip amq-streams-<version>-kafka-bin.zip -d /opt
mv /opt/kafka*redhat* /opt/kafka
    Copy to Clipboard Toggle word wrap

  3. Change the ownership of the /opt/kafka directory to the Kafka user: 

    chown -R kafka:kafka /opt/kafka
    Copy to Clipboard Toggle word wrap

  4. Create directory the /var/lib/zookeeper directory for storing ZooKeeper data and set its ownership to the Kafka user: 

    mkdir /var/lib/zookeeper
chown -R kafka:kafka /var/lib/zookeeper
    Copy to Clipboard Toggle word wrap

  5. Create the /var/lib/kafka directory for storing Kafka data and change its ownership to the Kafka user: 

    mkdir /var/lib/kafka
chown -R kafka:kafka /var/lib/kafka
    Copy to Clipboard Toggle word wrap

    You can now run a default configuration of Kafka as a single-node cluster.

  6. (Optional) Run other Kafka components, like Kafka Connect, on the same host.

    To run other components, specify the hostname and port to connect to the Kafka broker using the bootstrap.servers property in the component configuration.

    Example bootstrap servers configuration pointing to a single Kafka broker on the same host

    bootstrap.servers=localhost:9092
    Copy to Clipboard Toggle word wrap

    However, we recommend installing and running Kafka components on separate hosts.

  7. (Optional) Install Kafka components on separate hosts.

    1. Extract the Kafka installation files into the /opt/kafka/ directory on each host.
    2. Change the ownership of the /opt/kafka/ directory to the Kafka user on each host.

    3. Update the bootstrap.servers property to connect the components to the Kafka brokers running on different hosts.

      Example bootstrap servers configuration pointing to Kafka brokers on different hosts

      bootstrap.servers=kafka0.<host_ip_address>:9092,kafka1.<host_ip_address>:9092,kafka2.<host_ip_address>:9092
      Copy to Clipboard Toggle word wrap

      You can use this configuration for Kafka Connect, MirrorMaker 2, and the Kafka Bridge.

3.4. Running a single-node Kafka cluster
링크 복사

This procedure shows how to run a basic Streams for Apache Kafka cluster consisting of a single Apache ZooKeeper node and a single Apache Kafka node, both running on the same host. The default configuration files are used for Kafka.

Warning

A single node Streams for Apache Kafka cluster does not provide reliability and high availability and is suitable only for development purposes.

Prerequisites

  • Streams for Apache Kafka is installed on the host

Running the cluster

  1. Generate a unique ID for the Kafka cluster.

    You can use the kafka-storage tool to do this: 

    ./bin/kafka-storage.sh random-uuid
    Copy to Clipboard Toggle word wrap

    The command returns an ID.

    Note

    A cluster ID is required in KRaft mode.

  2. Edit the Kafka configuration file ./config/server.properties. Set the log.dirs option to /var/lib/kafka/: 

    log.dirs=/var/lib/kafka/
    Copy to Clipboard Toggle word wrap

  3. Start Kafka: 

    ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

  4. Check that Kafka is running: 

    jcmd | grep kafka
    Copy to Clipboard Toggle word wrap

    Returns: 

    process ID kafka.Kafka ./config/server.properties
    Copy to Clipboard Toggle word wrap

3.5. Sending and receiving messages from a topic
링크 복사

This procedure describes how to start the Kafka console producer and consumer clients and use them to send and receive several messages.

A new topic is automatically created in step one. Topic auto-creation is controlled using the auto.create.topics.enable configuration property (set to true by default). Alternatively, you can configure and create topics before using the cluster. For more information, see Topics.

Prerequisites

Procedure

  1. Start the Kafka console producer and configure it to send messages to a new topic: 

    ./bin/kafka-console-producer.sh --broker-list <bootstrap_address> --topic <topic-name>
    Copy to Clipboard Toggle word wrap

    For example: 

    ./bin/kafka-console-producer.sh --broker-list localhost:9092 --topic my-topic
    Copy to Clipboard Toggle word wrap

  2. Enter several messages into the console. Press Enter to send each individual message to your new topic: 

    >message 1
>message 2
>message 3
>message 4
    Copy to Clipboard Toggle word wrap

    When Kafka creates a new topic automatically, you might receive a warning that the topic does not exist: 

    WARN Error while fetching metadata with correlation id 39 :
{4-3-16-topic1=LEADER_NOT_AVAILABLE} (org.apache.kafka.clients.NetworkClient)
    Copy to Clipboard Toggle word wrap

    The warning should not reappear after you send further messages.

  3. In a new terminal window, start the Kafka console consumer and configure it to read messages from the beginning of your new topic. 

    ./bin/kafka-console-consumer.sh --bootstrap-server <bootstrap_address> --topic <topic-name> --from-beginning
    Copy to Clipboard Toggle word wrap

    For example: 

    ./bin/kafka-console-consumer.sh --bootstrap-server localhost:9092 --topic my-topic --from-beginning
    Copy to Clipboard Toggle word wrap

    The incoming messages display in the consumer console.

  4. Switch to the producer console and send additional messages. Check that they display in the consumer console.
  5. Stop the Kafka console producer and then the consumer by pressing Ctrl+C.

3.6. Stopping the Streams for Apache Kafka services
링크 복사

You can stop the Kafka and ZooKeeper services by running a script. All connections to the Kafka and ZooKeeper services will be terminated.

Prerequisites

  • Streams for Apache Kafka is installed on the host
  • ZooKeeper and Kafka are up and running

Procedure

  1. Stop the Kafka broker. 

    ./bin/kafka-server-stop.sh
    Copy to Clipboard Toggle word wrap

  2. Confirm that the Kafka broker is stopped. 

    jcmd | grep kafka
    Copy to Clipboard Toggle word wrap

  3. Stop ZooKeeper. 

    ./bin/zookeeper-server-stop.sh
    Copy to Clipboard Toggle word wrap

Chapter 4. Running a multi-node environment
링크 복사

A multi-node environment comprises a number of nodes that operate as a cluster. You can have a cluster of replicated ZooKeeper nodes and a cluster of broker nodes, with topic replication across the brokers.

Multi-node environments offer stability and availability.

4.1. Running a multi-node ZooKeeper cluster
링크 복사

Configure and run ZooKeeper as a multi-node cluster.

Prerequisites

  • Streams for Apache Kafka is installed on all hosts which will be used as ZooKeeper cluster nodes.

Running the cluster

  1. Create the myid file in /var/lib/zookeeper/. Enter ID 1 for the first ZooKeeper node, 2 for the second ZooKeeper node, and so on. 

    echo "<NodeID>" > /var/lib/zookeeper/myid
    Copy to Clipboard Toggle word wrap

    For example: 

    echo "1" > /var/lib/zookeeper/myid
    Copy to Clipboard Toggle word wrap

  2. Edit the ZooKeeper ./config/zookeeper.properties configuration file for the following:

    • Set the option dataDir to /var/lib/zookeeper/.
    • Configure the initLimit and syncLimit options.
    • Configure the reconfigEnabled and standaloneEnabled options.

    • Add a list of all ZooKeeper nodes. The list should include also the current node.

      Example configuration for a node of ZooKeeper cluster with five members

      tickTime=2000
dataDir=/var/lib/zookeeper/
initLimit=5
syncLimit=2
reconfigEnabled=true
standaloneEnabled=false

server.1=172.17.0.1:2888:3888:participant;172.17.0.1:2181
server.2=172.17.0.2:2888:3888:participant;172.17.0.2:2181
server.3=172.17.0.3:2888:3888:participant;172.17.0.3:2181
server.4=172.17.0.4:2888:3888:participant;172.17.0.4:2181
server.5=172.17.0.5:2888:3888:participant;172.17.0.5:2181
      Copy to Clipboard Toggle word wrap

  3. Start ZooKeeper with the default configuration file. 

    ./bin/zookeeper-server-start.sh -daemon ./config/zookeeper.properties
    Copy to Clipboard Toggle word wrap

  4. Verify that ZooKeeper is running. 

    jcmd | grep zookeeper
    Copy to Clipboard Toggle word wrap

    Returns: 

    number org.apache.zookeeper.server.quorum.QuorumPeerMain ./config/zookeeper.properties
    Copy to Clipboard Toggle word wrap
  5. Repeat this procedure on all the nodes of the cluster.

  6. Verify that all nodes are members of the cluster by sending a stat command to each of the nodes using the ncat utility.

    Use ncat stat to check the node status

    echo stat | ncat localhost 2181
    Copy to Clipboard Toggle word wrap

    To use four-letter word commands, like stat, you need to specify 4lw.commands.whitelist=* in zookeeper.properties.

    The output shows that a node is either a leader or follower.

    Example output from the ncat command

    ZooKeeper version: 3.4.13-2d71af4dbe22557fda74f9a9b4309b15a7487f03, built on 06/29/2018 00:39 GMT
Clients:
 /0:0:0:0:0:0:0:1:59726[0](queued=0,recved=1,sent=0)

Latency min/avg/max: 0/0/0
Received: 2
Sent: 1
Connections: 1
Outstanding: 0
Zxid: 0x200000000
Mode: follower
Node count: 4
    Copy to Clipboard Toggle word wrap

4.2. Running a multi-node Kafka cluster
링크 복사

Configure and run Kafka as a multi-node cluster.

Prerequisites

Running the cluster

For each Kafka broker in your Streams for Apache Kafka cluster:

  1. Edit the ./config/server.properties Kafka configuration file as follows:

    • Set the broker.id field to 0 for the first broker, 1 for the second broker, and so on.
    • Configure the details for connecting to ZooKeeper in the zookeeper.connect option.
    • Configure the Kafka listeners.

    • Set the directories where the commit logs should be stored in the logs.dir directory.

      Here we see an example configuration for a Kafka broker: 

      broker.id=0
zookeeper.connect=zoo1.my-domain.com:2181,zoo2.my-domain.com:2181,zoo3.my-domain.com:2181
listeners=REPLICATION://:9091,PLAINTEXT://:9092
listener.security.protocol.map=PLAINTEXT:PLAINTEXT,REPLICATION:PLAINTEXT
inter.broker.listener.name=REPLICATION
log.dirs=/var/lib/kafka
      Copy to Clipboard Toggle word wrap

      In a typical installation where each Kafka broker is running on identical hardware, only the broker.id configuration property will differ between each broker config.

  2. Start the Kafka broker with the default configuration file. 

    ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

  3. Verify that the Kafka broker is running. 

    jcmd | grep Kafka
    Copy to Clipboard Toggle word wrap

    Returns: 

    process ID kafka.Kafka ./config/server.properties
    Copy to Clipboard Toggle word wrap

  4. Verify that all nodes are members of the Kafka cluster by sending a dump command to one of the ZooKeeper nodes using the ncat utility.

    Use ncat dump to check all Kafka brokers registered in ZooKeeper

    echo dump | ncat zoo1.my-domain.com 2181
    Copy to Clipboard Toggle word wrap

    To use four-letter word commands, like dump, you need to specify 4lw.commands.whitelist=* in zookeeper.properties.

    The output must contain all Kafka brokers you just configured and started.

    Example output from the ncat command for a Kafka cluster with 3 nodes

    SessionTracker dump:
org.apache.zookeeper.server.quorum.LearnerSessionTracker@28848ab9
ephemeral nodes dump:
Sessions with Ephemerals (3):
0x20000015dd00000:
        /brokers/ids/1
0x10000015dc70000:
        /controller
        /brokers/ids/0
0x10000015dc70001:
        /brokers/ids/2
    Copy to Clipboard Toggle word wrap

4.3. Performing a graceful rolling restart of Kafka brokers
링크 복사

This procedure shows how to do a graceful rolling restart of brokers in a multi-node cluster. A rolling restart is usually required following an upgrade or change to the Kafka cluster configuration properties.

Note

Some broker configurations do not need a restart of the broker. For more information, see Updating Broker Configs in the Apache Kafka documentation.

After you perform a restart of brokers, check for under-replicated topic partitions to make sure that replica partitions have caught up.

To achieve a graceful restart with no loss of availability, ensure that you are replicating topics and that at least the minimum number of replicas (min.insync.replicas) replicas are in sync. The min.insync.replicas configuration determines the minimum number of replicas that must acknowledge a write for the write to be considered successful.

For a multi-node cluster, the standard approach is to have a topic replication factor of at least 3 and a minimum number of in-sync replicas set to 1 less than the replication factor. If you are using acks=all in your producer configuration for data durability, check that the broker you restarted is in sync with all the partitions it’s replicating before restarting the next broker.

Single-node clusters are unavailable during a restart, since all partitions are on the same broker.

Prerequisites

  • A ZooKeeper cluster is configured and running.

  • The Kafka cluster is operating as expected.

    Check for under-replicated partitions or any other issues affecting broker operation. The steps in this procedure describe how to check for under-replicated partitions.

Procedure

Perform the following steps on each Kafka broker. Complete the steps on the first broker before moving on to the next. Perform the steps on the broker that’s the active controller last. Otherwise, the active controller needs to change on more than one restart.

  1. Stop the Kafka broker: 

    ./bin/kafka-server-stop.sh
    Copy to Clipboard Toggle word wrap

  2. Make any changes to the broker configuration that require a restart after completion.

    For further information, see the following:

  3. Restart the Kafka broker: 

    ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

  4. Check that Kafka is running: 

    jcmd | grep kafka
    Copy to Clipboard Toggle word wrap

    Returns: 

    process ID kafka.Kafka ./config/server.properties
    Copy to Clipboard Toggle word wrap

  5. Verify that all nodes are members of the Kafka cluster by sending a dump command to one of the ZooKeeper nodes using the ncat utility.

    Use ncat dump to check all Kafka brokers registered in ZooKeeper

    echo dump | ncat zoo1.my-domain.com 2181
    Copy to Clipboard Toggle word wrap

    To use four-letter word commands, like dump, you need to specify 4lw.commands.whitelist=* in zookeeper.properties.

    The output must contain the Kafka broker you started.

    Example output from the ncat command for a Kafka cluster with 3 nodes

    SessionTracker dump:
org.apache.zookeeper.server.quorum.LearnerSessionTracker@28848ab9
ephemeral nodes dump:
Sessions with Ephemerals (3):
0x20000015dd00000:
        /brokers/ids/1
0x10000015dc70000:
        /controller
        /brokers/ids/0
0x10000015dc70001:
        /brokers/ids/2
    Copy to Clipboard Toggle word wrap

  6. Wait until the broker has zero under-replicated partitions. You can check from the command line or use metrics.

    • Use the kafka-topics.sh command with the --under-replicated-partitions parameter: 

      ./bin/kafka-topics.sh --bootstrap-server <bootstrap_address>  --describe --under-replicated-partitions
      Copy to Clipboard Toggle word wrap

      For example: 

      ./bin/kafka-topics.sh --bootstrap-server localhost:9092 --describe --under-replicated-partitions
      Copy to Clipboard Toggle word wrap

      The command provides a list of topics with under-replicated partitions in a cluster.

      Topics with under-replicated partitions

      Topic: topic3 Partition: 4 Leader: 2 Replicas: 2,3 Isr: 2
Topic: topic3 Partition: 5 Leader: 3 Replicas: 1,2 Isr: 1
Topic: topic1 Partition: 1 Leader: 3 Replicas: 1,3 Isr: 3
# …
      Copy to Clipboard Toggle word wrap

      Under-replicated partitions are listed if the ISR (in-sync replica) count is less than the number of replicas. If a list is not returned, there are no under-replicated partitions.

    • Use the UnderReplicatedPartitions metric: 

      kafka.server:type=ReplicaManager,name=UnderReplicatedPartitions
      Copy to Clipboard Toggle word wrap

      The metric provides a count of partitions where replicas have not caught up. You wait until the count is zero.

      Tip

      Use the Kafka Exporter to create an alert when there are one or more under-replicated partitions for a topic.

Checking logs when restarting

If a broker fails to start, check the application logs for information. You can also check the status of a broker shutdown and restart in the ./logs/server.log application log.

Log for the successful shutdown of a broker

# ...
[2022-06-08 14:32:29,885] INFO Terminating process due to signal SIGTERM (org.apache.kafka.common.utils.LoggingSignalHandler)
[2022-06-08 14:32:29,886] INFO [KafkaServer id=0] shutting down (kafka.server.KafkaServer)
[2022-06-08 14:32:29,887] INFO [KafkaServer id=0] Starting controlled shutdown (kafka.server.KafkaServer)
[2022-06-08 14:32:29,896] INFO [KafkaServer id=0] Controlled shutdown request returned successfully after 6ms (kafka.server.KafkaServer)
# ...
Copy to Clipboard Toggle word wrap

Log for the successful restart of a broker

# ...
[2022-06-08 14:39:35,245] INFO [KafkaServer id=0] started (kafka.server.KafkaServer)
# ...
Copy to Clipboard Toggle word wrap

Chapter 5. Configuring Streams for Apache Kafka
링크 복사

Use the Kafka and ZooKeeper properties files to configure Streams for Apache Kafka.

ZooKeeper
/kafka/config/zookeeper.properties
Kafka
/kafka/config/server.properties

The properties files are in the Java format, with each property on separate line in the following format: 

<option> = <value>
Copy to Clipboard Toggle word wrap

Lines starting with # or ! will be treated as comments and will be ignored by Streams for Apache Kafka components. 

# This is a comment
Copy to Clipboard Toggle word wrap

Values can be split into multiple lines by using \ directly before the newline / carriage return. 

sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
    username="bob" \
    password="bobs-password";
Copy to Clipboard Toggle word wrap

After you save the changes in the properties files, you need to restart the Kafka broker or ZooKeeper. In a multi-node environment, you will need to repeat the process on each node in the cluster.

5.1. Using standard Kafka configuration properties
링크 복사

Use standard Kafka configuration properties to configure Kafka components.

The properties provide options to control and tune the configuration of the following Kafka components:

  • Brokers
  • Topics
  • Producer, consumer, and management clients
  • Kafka Connect
  • Kafka Streams

Broker and client parameters include options to configure authorization, authentication and encryption.

For further information on Kafka configuration properties and how to use the properties to tune your deployment, see the following guides:

5.2. Loading configuration values from environment variables
링크 복사

Use the Environment Variables Configuration Provider plugin to load configuration data from environment variables. You can use the Environment Variables Configuration Provider, for example, to load certificates or JAAS configuration from environment variables.

You can use the provider to load configuration data for all Kafka components, including producers and consumers. Use the provider, for example, to provide the credentials for Kafka Connect connector configuration.

Prerequisites

Procedure

  1. Add the Environment Variables Configuration Provider JAR file to the Kafka libs directory.

  2. Initialize the Environment Variables Configuration Provider in the configuration properties file of the Kafka component. For example, to initialize the provider for Kafka, add the configuration to the server.properties file.

    Configuration to enable the Environment Variables Configuration Provider

    config.providers.env.class=org.apache.kafka.common.config.provider.EnvVarConfigProvider
    Copy to Clipboard Toggle word wrap

  3. Add configuration to the properties file to load data from environment variables.

    Configuration to load data from an environment variable

    option=${env:<MY_ENV_VAR_NAME>}
    Copy to Clipboard Toggle word wrap

    Use capitalized or upper-case environment variable naming conventions, such as MY_ENV_VAR_NAME.

  4. Save the changes.

  5. Restart the Kafka component.

    For information on restarting brokers in a multi-node cluster, see Section 4.3, “Performing a graceful rolling restart of Kafka brokers”.

5.3. Configuring ZooKeeper
링크 복사

Kafka uses ZooKeeper to store configuration data and for cluster coordination. It is strongly recommended to run a cluster of replicated ZooKeeper instances.

5.3.1. Basic configuration
링크 복사

The most important ZooKeeper configuration options are:

tickTime
ZooKeeper’s basic time unit in milliseconds. It is used for heartbeats and session timeouts. For example, minimum session timeout will be two ticks.
dataDir
The directory where ZooKeeper stores its transaction logs and snapshots of its in-memory database. This should be set to the /var/lib/zookeeper/ directory that was created during installation.
clientPort
Port number where clients can connect. Defaults to 2181.

An example ZooKeeper configuration file named config/zookeeper.properties is located in the Streams for Apache Kafka installation directory. It is recommended to place the dataDir directory on a separate disk device to minimize the latency in ZooKeeper.

ZooKeeper configuration file should be located in ./config/zookeeper.properties. A basic example of the configuration file can be found below. The configuration file has to be readable by the Kafka user. 

tickTime=2000
dataDir=/var/lib/zookeeper/
clientPort=2181
Copy to Clipboard Toggle word wrap

5.3.2. ZooKeeper cluster configuration
링크 복사

In most production environments, we recommend you deploy a cluster of replicated ZooKeeper instances. A stable and highly available ZooKeeper cluster is important for running for a reliable ZooKeeper service. ZooKeeper clusters are also referred to as ensembles.

ZooKeeper clusters usually consist of an odd number of nodes. ZooKeeper requires that a majority of the nodes in the cluster are up and running. For example:

  • In a cluster with three nodes, at least two of the nodes must be up and running. This means it can tolerate one node being down.
  • In a cluster consisting of five nodes, at least three nodes must be available. This means it can tolerate two nodes being down.
  • In a cluster consisting of seven nodes, at least four nodes must be available. This means it can tolerate three nodes being down.

Having more nodes in the ZooKeeper cluster delivers better resiliency and reliability of the whole cluster.

ZooKeeper can run in clusters with an even number of nodes. The additional node, however, does not increase the resiliency of the cluster. A cluster with four nodes requires at least three nodes to be available and can tolerate only one node being down. Therefore it has exactly the same resiliency as a cluster with only three nodes.

Ideally, the different ZooKeeper nodes should be located in different data centers or network segments. Increasing the number of ZooKeeper nodes increases the workload spent on cluster synchronization. For most Kafka use cases, a ZooKeeper cluster with 3, 5 or 7 nodes should be sufficient.

Warning

A ZooKeeper cluster with 3 nodes can tolerate only 1 unavailable node. This means that if a cluster node crashes while you are doing maintenance on another node your ZooKeeper cluster will be unavailable.

Replicated ZooKeeper configuration supports all configuration options supported by the standalone configuration. Additional options are added for the clustering configuration:

initLimit
Amount of time to allow followers to connect and sync to the cluster leader. The time is specified as a number of ticks (see the tickTime option for more details).
syncLimit
Amount of time for which followers can be behind the leader. The time is specified as a number of ticks (see the tickTime option for more details).
reconfigEnabled
Enables or disables dynamic reconfiguration. Must be enabled in order to add or remove servers to a ZooKeeper cluster.
standaloneEnabled
Enables or disables standalone mode, where ZooKeeper runs with only one server.

In addition to the options above, every configuration file should contain a list of servers which should be members of the ZooKeeper cluster. The server records should be specified in the format server.id=hostname:port1:port2, where:

id
The ID of the ZooKeeper cluster node.
hostname
The hostname or IP address where the node listens for connections.
port1
The port number used for intra-cluster communication.
port2
The port number used for leader election.

The following is an example configuration file of a ZooKeeper cluster with three nodes: 

tickTime=2000
dataDir=/var/lib/zookeeper/
initLimit=5
syncLimit=2
reconfigEnabled=true
standaloneEnabled=false

server.1=172.17.0.1:2888:3888:participant;172.17.0.1:2181
server.2=172.17.0.2:2888:3888:participant;172.17.0.2:2181
server.3=172.17.0.3:2888:3888:participant;172.17.0.3:2181
Copy to Clipboard Toggle word wrap
Tip

To use four letter word commands, specify 4lw.commands.whitelist=* in zookeeper.properties.

myid files

Each node in the ZooKeeper cluster must be assigned a unique ID. Each node’s ID must be configured in a myid file and stored in the dataDir folder, like /var/lib/zookeeper/. The myid files should contain only a single line with the written ID as text. The ID can be any integer from 1 to 255. You must manually create this file on each cluster node. Using this file, each ZooKeeper instance will use the configuration from the corresponding server. line in the configuration file to configure its listeners. It will also use all other server. lines to identify other cluster members.

In the above example, there are three nodes, so each one will have a different myid with values 1, 2, and 3 respectively.

5.3.3. Authentication
링크 복사

By default, ZooKeeper does not use any form of authentication and allows anonymous connections. However, it supports Java Authentication and Authorization Service (JAAS) which can be used to set up authentication using Simple Authentication and Security Layer (SASL). ZooKeeper supports authentication using the DIGEST-MD5 SASL mechanism with locally stored credentials.

5.3.3.1. Authentication with SASL
링크 복사

JAAS is configured using a separate configuration file. It is recommended to place the JAAS configuration file in the same directory as the ZooKeeper configuration (./config/). The recommended file name is zookeeper-jaas.conf. When using a ZooKeeper cluster with multiple nodes, the JAAS configuration file has to be created on all cluster nodes.

JAAS is configured using contexts. Separate parts such as the server and client are always configured with a separate context. The context is a configuration option and has the following format: 

ContextName {
       param1
       param2;
};
Copy to Clipboard Toggle word wrap

SASL Authentication is configured separately for server-to-server communication (communication between ZooKeeper instances) and client-to-server communication (communication between Kafka and ZooKeeper). Server-to-server authentication is relevant only for ZooKeeper clusters with multiple nodes.

Server-to-Server authentication

For server-to-server authentication, the JAAS configuration file contains two parts:

  • The server configuration
  • The client configuration

When using DIGEST-MD5 SASL mechanism, the QuorumServer context is used to configure the authentication server. It must contain all the usernames to be allowed to connect together with their passwords in an unencrypted form. The second context, QuorumLearner, has to be configured for the client which is built into ZooKeeper. It also contains the password in an unencrypted form. An example of the JAAS configuration file for DIGEST-MD5 mechanism can be found below: 

QuorumServer {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       user_zookeeper="123456";
};

QuorumLearner {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       username="zookeeper"
       password="123456";
};
Copy to Clipboard Toggle word wrap

In addition to the JAAS configuration file, you must enable the server-to-server authentication in the regular ZooKeeper configuration file by specifying the following options: 

quorum.auth.enableSasl=true
quorum.auth.learnerRequireSasl=true
quorum.auth.serverRequireSasl=true
quorum.auth.learner.loginContext=QuorumLearner
quorum.auth.server.loginContext=QuorumServer
quorum.cnxn.threads.size=20
Copy to Clipboard Toggle word wrap

Use the KAFKA_OPTS environment variable to pass the JAAS configuration file to the ZooKeeper server as a Java property: 

export KAFKA_OPTS="-Djava.security.auth.login.config=./config/zookeeper-jaas.conf"; ./bin/zookeeper-server-start.sh -daemon ./config/zookeeper.properties
Copy to Clipboard Toggle word wrap

For more information about server-to-server authentication, see ZooKeeper wiki.

Client-to-Server authentication

Client-to-server authentication is configured in the same JAAS file as the server-to-server authentication. However, unlike the server-to-server authentication, it contains only the server configuration. The client part of the configuration has to be done in the client. For information on how to configure a Kafka broker to connect to ZooKeeper using authentication, see the Kafka installation section.

Add the Server context to the JAAS configuration file to configure client-to-server authentication. For DIGEST-MD5 mechanism it configures all usernames and passwords: 

Server {
    org.apache.zookeeper.server.auth.DigestLoginModule required
    user_super="123456"
    user_kafka="123456"
    user_someoneelse="123456";
};
Copy to Clipboard Toggle word wrap

After configuring the JAAS context, enable the client-to-server authentication in the ZooKeeper configuration file by adding the following line: 

requireClientAuthScheme=sasl
authProvider.1=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.2=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.3=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
Copy to Clipboard Toggle word wrap

You must add the authProvider.<ID> property for every server that is part of the ZooKeeper cluster.

Use the KAFKA_OPTS environment variable to pass the JAAS configuration file to the ZooKeeper server as a Java property: 

export KAFKA_OPTS="-Djava.security.auth.login.config=./config/zookeeper-jaas.conf"; ./bin/zookeeper-server-start.sh -daemon ./config/zookeeper.properties
Copy to Clipboard Toggle word wrap

For more information about configuring ZooKeeper authentication in Kafka brokers, see Section 6.5, “ZooKeeper authentication”.

5.3.3.2. Enabling server-to-server authentication using DIGEST-MD5
링크 복사

This procedure describes how to enable authentication using the SASL DIGEST-MD5 mechanism between the nodes of the ZooKeeper cluster.

Prerequisites

  • Streams for Apache Kafka is installed on the host
  • ZooKeeper cluster is configured with multiple nodes.

Enabling SASL DIGEST-MD5 authentication

  1. On all ZooKeeper nodes, create or edit the ./config/zookeeper-jaas.conf JAAS configuration file and add the following contexts: 

    QuorumServer {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       user_<Username>="<Password>";
};

QuorumLearner {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       username="<Username>"
       password="<Password>";
};
    Copy to Clipboard Toggle word wrap

    The username and password must be the same in both JAAS contexts. For example: 

    QuorumServer {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       user_zookeeper="123456";
};

QuorumLearner {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       username="zookeeper"
       password="123456";
};
    Copy to Clipboard Toggle word wrap

  2. On all ZooKeeper nodes, edit the ./config/zookeeper.properties ZooKeeper configuration file and set the following options: 

    quorum.auth.enableSasl=true
quorum.auth.learnerRequireSasl=true
quorum.auth.serverRequireSasl=true
quorum.auth.learner.loginContext=QuorumLearner
quorum.auth.server.loginContext=QuorumServer
quorum.cnxn.threads.size=20
    Copy to Clipboard Toggle word wrap

  3. Restart all ZooKeeper nodes one by one. To pass the JAAS configuration to ZooKeeper, use the KAFKA_OPTS environment variable. 

    export KAFKA_OPTS="-Djava.security.auth.login.config=./config/zookeeper-jaas.conf"; ./bin/zookeeper-server-start.sh -daemon ./config/zookeeper.properties
    Copy to Clipboard Toggle word wrap
5.3.3.3. Enabling Client-to-server authentication using DIGEST-MD5
링크 복사

This procedure describes how to enable authentication using the SASL DIGEST-MD5 mechanism between ZooKeeper clients and ZooKeeper.

Prerequisites

Enabling SASL DIGEST-MD5 authentication

  1. On all ZooKeeper nodes, create or edit the ./config/zookeeper-jaas.conf JAAS configuration file and add the following context: 

    Server {
    org.apache.zookeeper.server.auth.DigestLoginModule required
    user_super="<SuperUserPassword>"
    user<Username1>_="<Password1>" user<USername2>_="<Password2>";
};
    Copy to Clipboard Toggle word wrap

    The super automatically has administrator priviledges. The file can contain multiple users, but only one additional user is required by the Kafka brokers. The recommended name for the Kafka user is kafka.

    The following example shows the Server context for client-to-server authentication: 

    Server {
    org.apache.zookeeper.server.auth.DigestLoginModule required
    user_super="123456"
    user_kafka="123456";
};
    Copy to Clipboard Toggle word wrap

  2. On all ZooKeeper nodes, edit the ./config/zookeeper.properties ZooKeeper configuration file and set the following options: 

    requireClientAuthScheme=sasl
authProvider.<IdOfBroker1>=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.<IdOfBroker2>=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.<IdOfBroker3>=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
    Copy to Clipboard Toggle word wrap

    The authProvider.<ID> property has to be added for every node which is part of the ZooKeeper cluster. An example three-node ZooKeeper cluster configuration must look like the following: 

    requireClientAuthScheme=sasl
authProvider.1=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.2=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.3=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
    Copy to Clipboard Toggle word wrap

  3. Restart all ZooKeeper nodes one by one. To pass the JAAS configuration to ZooKeeper, use the KAFKA_OPTS environment variable. 

    export KAFKA_OPTS="-Djava.security.auth.login.config=./config/zookeeper-jaas.conf"; ./bin/zookeeper-server-start.sh -daemon ./config/zookeeper.properties
    Copy to Clipboard Toggle word wrap

5.3.4. Authorization
링크 복사

ZooKeeper supports access control lists (ACLs) to protect data stored inside it. Kafka brokers can automatically configure the ACL rights for all ZooKeeper records they create so no other ZooKeeper user can modify them.

For more information about enabling ZooKeeper ACLs in Kafka brokers, see Section 6.6, “ZooKeeper authorization”.

5.3.5. TLS
링크 복사

ZooKeeper supports TLS for encryption or authentication.

5.3.6. Additional configuration options
링크 복사

You can set the following additional ZooKeeper configuration options based on your use case:

maxClientCnxns
The maximum number of concurrent client connections to a single member of the ZooKeeper cluster.
autopurge.snapRetainCount
Number of snapshots of ZooKeeper’s in-memory database which will be retained. Default value is 3.
autopurge.purgeInterval
The time interval in hours for purging snapshots. The default value is 0 and this option is disabled.

All available configuration options can be found in the ZooKeeper documentation.

5.4. Configuring Kafka
링크 복사

Kafka uses a properties file to store static configuration. The recommended location for the configuration file is ./config/server.properties. The configuration file has to be readable by the Kafka user.

Streams for Apache Kafka ships an example configuration file that highlights various basic and advanced features of the product. It can be found under config/server.properties in the Streams for Apache Kafka installation directory.

This chapter explains the most important configuration options.

5.4.1. ZooKeeper
링크 복사

Kafka brokers need ZooKeeper to store some parts of their configuration as well as to coordinate the cluster (for example to decide which node is a leader for which partition). Connection details for the ZooKeeper cluster are stored in the configuration file. The field zookeeper.connect contains a comma-separated list of hostnames and ports of members of the zookeeper cluster.

For example: 

zookeeper.connect=zoo1.my-domain.com:2181,zoo2.my-domain.com:2181,zoo3.my-domain.com:2181
Copy to Clipboard Toggle word wrap

Kafka will use these addresses to connect to the ZooKeeper cluster. With this configuration, all Kafka znodes will be created directly in the root of ZooKeeper database. Therefore, such a ZooKeeper cluster could be used only for a single Kafka cluster. To configure multiple Kafka clusters to use single ZooKeeper cluster, specify a base (prefix) path at the end of the ZooKeeper connection string in the Kafka configuration file: 

zookeeper.connect=zoo1.my-domain.com:2181,zoo2.my-domain.com:2181,zoo3.my-domain.com:2181/my-cluster-1
Copy to Clipboard Toggle word wrap

5.4.2. Listeners
링크 복사

Listeners are used to connect to Kafka brokers. Each Kafka broker can be configured to use multiple listeners. Each listener requires a different configuration so it can listen on a different port or network interface.

To configure listeners, edit the listeners property in the Kafka configuration properties file. Add listeners to the listeners property as a comma-separated list. Configure each property as follows: 

<listener_name>://<hostname>:<port>
Copy to Clipboard Toggle word wrap

If <hostname> is empty, Kafka uses the java.net.InetAddress.getCanonicalHostName() class as the hostname.

Example configuration for multiple listeners

listeners=internal-1://:9092,internal-2://:9093,replication://:9094
Copy to Clipboard Toggle word wrap

When a Kafka client wants to connect to a Kafka cluster, it first connects to the bootstrap server, which is one of the cluster nodes. The bootstrap server provides the client with a list of all the brokers in the cluster, and the client connects to each one individually. The list of brokers is based on the configured listeners.

Advertised listeners

Optionally, you can use the advertised.listeners property to provide the client with a different set of listener addresses than those given in the listeners property. This is useful if additional network infrastructure, such as a proxy, is between the client and the broker, or an external DNS name is being used instead of an IP address.

The advertised.listeners property is formatted in the same way as the listeners property.

Example configuration for advertised listeners

listeners=internal-1://:9092,internal-2://:9093
advertised.listeners=internal-1://my-broker-1.my-domain.com:1234,internal-2://my-broker-1.my-domain.com:1235
Copy to Clipboard Toggle word wrap

Note

The names of the advertised listeners must match those listed in the listeners property.

Inter-broker listeners

Inter-broker listeners are used for communication between Kafka brokers. Inter-broker communication is required for:

  • Coordinating workloads between different brokers
  • Replicating messages between partitions stored on different brokers

The inter-broker listener can be assigned to a port of your choice. When multiple listeners are configured, you can define the name of the inter-broker listener in the inter.broker.listener.name property of your broker configuration.

Here, the inter-broker listener is named as REPLICATION: 

listeners=REPLICATION://0.0.0.0:9091
inter.broker.listener.name=REPLICATION
Copy to Clipboard Toggle word wrap

Controller listeners

Controller configuration is used to connect and communicate with the controller that coordinates the cluster and manages the metadata used to track the status of brokers and partitions.

By default, communication between the controllers and brokers uses a dedicated controller listener. Controllers are responsible for coordinating administrative tasks, such as partition leadership changes, so one or more of these listeners is required.

Specify listeners to use for controllers using the controller.listener.names property. You can specify a dynamic quorum of controllers using the controller.quorum.bootstrap.servers property. The quorum enables a leader-follower structure for administrative tasks, with the leader actively managing operations and followers as hot standbys, ensuring metadata consistency in memory and facilitating failover. 

listeners=CONTROLLER://0.0.0.0:9090
controller.listener.names=CONTROLLER
controller.quorum.bootstrap.servers=localhost:9090
Copy to Clipboard Toggle word wrap

The format for the controller quorum is <hostname>:<port>.

5.4.3. Data logs
링크 복사

Apache Kafka stores all records it receives from producers in logs. The logs contain the actual data, in the form of records, that Kafka needs to deliver. Note that these records differ from application log files, which detail the broker’s activities.

Log directories

You can configure log directories using the log.dirs property in the server configuration properties file to store logs in one or multiple log directories. It should be set to /var/lib/kafka directory created during installation:

Data log configuration

log.dirs=/var/lib/kafka
Copy to Clipboard Toggle word wrap

For performance reasons, you can configure log.dirs to multiple directories and place each of them on a different physical device to improve disk I/O performance. For example:

Configuration for multiple directories

log.dirs=/var/lib/kafka1,/var/lib/kafka2,/var/lib/kafka3
Copy to Clipboard Toggle word wrap

5.4.4. Broker ID
링크 복사

Broker ID is a unique identifier for each broker in the cluster. You can assign an integer greater than or equal to 0 as broker ID. The broker ID is used to identify the brokers after restarts or crashes and it is therefore important that the id is stable and does not change over time. The broker ID is configured in the broker properties file: 

broker.id=1
Copy to Clipboard Toggle word wrap

Chapter 6. Securing access to Kafka
링크 복사

Secure your Kafka cluster by managing the access a client has to Kafka brokers. Specify configuration options to secure Kafka brokers and clients

A secure connection between Kafka brokers and clients can encompass the following:

  • Encryption for data exchange
  • Authentication to prove identity
  • Authorization to allow or decline actions executed by users

The authentication and authorization mechanisms specified for a client must match those specified for the Kafka brokers.

6.1. Listener configuration
링크 복사

Encryption and authentication in Kafka brokers is configured per listener. For more information about Kafka listener configuration, see Section 5.4.2, “Listeners”.

Each listener in the Kafka broker is configured with its own security protocol. The configuration property listener.security.protocol.map defines which listener uses which security protocol. It maps each listener name to its security protocol. Supported security protocols are:

PLAINTEXT
Listener without any encryption or authentication.
SSL
Listener using TLS encryption and, optionally, authentication using TLS client certificates.
SASL_PLAINTEXT
Listener without encryption but with SASL-based authentication.
SASL_SSL
Listener with TLS-based encryption and SASL-based authentication.

Given the following listeners configuration: 

listeners=INT1://:9092,INT2://:9093,REPLICATION://:9094
Copy to Clipboard Toggle word wrap

the listener.security.protocol.map might look like this: 

listener.security.protocol.map=INT1:SASL_PLAINTEXT,INT2:SASL_SSL,REPLICATION:SSL
Copy to Clipboard Toggle word wrap

This would configure the listener INT1 to use unencrypted connections with SASL authentication, the listener INT2 to use encrypted connections with SASL authentication and the REPLICATION interface to use TLS encryption (possibly with TLS client authentication). The same security protocol can be used multiple times. The following example is also a valid configuration: 

listener.security.protocol.map=INT1:SSL,INT2:SSL,REPLICATION:SSL
Copy to Clipboard Toggle word wrap

Such a configuration would use TLS encryption and TLS authentication (optional) for all interfaces.

6.2. TLS Encryption
링크 복사

Kafka supports TLS for encrypting communication with Kafka clients.

In order to use TLS encryption and server authentication, a keystore containing private and public keys has to be provided. This is usually done using a file in the Java Keystore (JKS) format. A path to this file is set in the ssl.keystore.location property. The ssl.keystore.password property should be used to set the password protecting the keystore. For example: 

ssl.keystore.location=/path/to/keystore/server-1.jks
ssl.keystore.password=123456
Copy to Clipboard Toggle word wrap

In some cases, an additional password is used to protect the private key. Any such password can be set using the ssl.key.password property.

Kafka is able to use keys signed by certification authorities as well as self-signed keys. Using keys signed by certification authorities should always be the preferred method. In order to allow clients to verify the identity of the Kafka broker they are connecting to, the certificate should always contain the advertised hostname(s) as its Common Name (CN) or in the Subject Alternative Names (SAN).

It is possible to use different SSL configurations for different listeners. All options starting with ssl. can be prefixed with listener.name.<NameOfTheListener>., where the name of the listener has to be always in lowercase. This will override the default SSL configuration for that specific listener. The following example shows how to use different SSL configurations for different listeners: 

listeners=INT1://:9092,INT2://:9093,REPLICATION://:9094
listener.security.protocol.map=INT1:SSL,INT2:SSL,REPLICATION:SSL

# Default configuration - will be used for listeners INT1 and INT2
ssl.keystore.location=/path/to/keystore/server-1.jks
ssl.keystore.password=123456

# Different configuration for listener REPLICATION
listener.name.replication.ssl.keystore.location=/path/to/keystore/replication.jks
listener.name.replication.ssl.keystore.password=123456
Copy to Clipboard Toggle word wrap

Additional TLS configuration options

In addition to the main TLS configuration options described above, Kafka supports many options for fine-tuning the TLS configuration. For example, to enable or disable TLS / SSL protocols or cipher suites:

ssl.cipher.suites
List of enabled cipher suites. Each cipher suite is a combination of authentication, encryption, MAC and key exchange algorithms used for the TLS connection. By default, all available cipher suites are enabled.
ssl.enabled.protocols
List of enabled TLS / SSL protocols. Defaults to TLSv1.2,TLSv1.1,TLSv1.

6.2.1. Enabling TLS encryption
링크 복사

This procedure describes how to enable encryption in Kafka brokers.

Prerequisites

Procedure

  1. Generate TLS certificates for all Kafka brokers in your cluster. The certificates should have their advertised and bootstrap addresses in their Common Name or Subject Alternative Name.

  2. Edit the Kafka configuration properties file on all cluster nodes for the following:

    • Change the listener.security.protocol.map field to specify the SSL protocol for the listener where you want to use TLS encryption.
    • Set the ssl.keystore.location option to the path to the JKS keystore with the broker certificate.

    • Set the ssl.keystore.password option to the password you used to protect the keystore.

      For example: 

      listeners=UNENCRYPTED://:9092,ENCRYPTED://:9093,REPLICATION://:9094
listener.security.protocol.map=UNENCRYPTED:PLAINTEXT,ENCRYPTED:SSL,REPLICATION:PLAINTEXT
ssl.keystore.location=/path/to/keystore/server-1.jks
ssl.keystore.password=123456
      Copy to Clipboard Toggle word wrap
  3. (Re)start the Kafka brokers

6.3. Authentication
링크 복사

To authenticate client connections to your Kafka cluster, the following options are available:

TLS client authentication
TLS (Transport Layer Security) using X.509 certificates on encrypted connections
Kafka SASL
Kafka SASL (Simple Authentication and Security Layer) using supported authentication mechanisms
OAuth 2.0
OAuth 2.0 token-based authentication

SASL authentication supports various mechanisms for both plain unencrypted connections and TLS connections:

  • PLAIN ― Authentication based on usernames and passwords.
  • SCRAM-SHA-256 and SCRAM-SHA-512 ― Authentication using Salted Challenge Response Authentication Mechanism (SCRAM).
  • GSSAPI ― Authentication against a Kerberos server.
Warning

The PLAIN mechanism sends usernames and passwords over the network in an unencrypted format. It should only be used in combination with TLS encryption.

6.3.1. Enabling TLS client authentication
링크 복사

Enable TLS client authentication in Kafka brokers to enhance security for connections to Kafka nodes already using TLS encryption.

Use the ssl.client.auth property to set TLS authentication with one of these values:

  • none ― TLS client authentication is off (default)
  • requested ― Optional TLS client authentication
  • required ― Clients must authenticate using a TLS client certificate

When a client authenticates using TLS client authentication, the authenticated principal name is derived from the distinguished name in the client certificate. For instance, a user with a certificate having a distinguished name CN=someuser will be authenticated with the principal CN=someuser,OU=Unknown,O=Unknown,L=Unknown,ST=Unknown,C=Unknown. This principal name provides a unique identifier for the authenticated user or entity. When TLS client authentication is not used, and SASL is disabled, the principal name defaults to ANONYMOUS.

Prerequisites

Procedure

  1. Prepare a JKS (Java Keystore ) truststore containing the public key of the CA (Certification Authority) used to sign the user certificates.

  2. Edit the Kafka configuration properties file on all cluster nodes as follows:

    • Specify the path to the JKS truststore using the ssl.truststore.location property.
    • If the truststore is password-protected, set the password using ssl.truststore.password property.

    • Set the ssl.client.auth property to required.

      TLS client authentication configuration

      ssl.truststore.location=/path/to/truststore.jks
ssl.truststore.password=123456
ssl.client.auth=required
      Copy to Clipboard Toggle word wrap

  3. (Re)start the Kafka brokers.

6.3.2. Enabling SASL PLAIN client authentication
링크 복사

Enable SASL PLAIN authentication in Kafka to enhance security for connections to Kafka nodes.

SASL authentication is enabled through the Java Authentication and Authorization Service (JAAS) using the KafkaServer JAAS context. You can define the JAAS configuration in a dedicated file or directly in the Kafka configuration.

The recommended location for the dedicated file is ./config/jaas.conf. Ensure that the file is readable by the Kafka user. Keep the JAAS configuration file in sync on all Kafka nodes.

Prerequisites

Procedure

  1. Edit or create the ./config/jaas.conf JAAS configuration file to enable the PlainLoginModule and specify the allowed usernames and passwords.

    Make sure this file is the same on all Kafka brokers.

    JAAS configuration

    KafkaServer {
    org.apache.kafka.common.security.plain.PlainLoginModule required
    user_admin="123456"
    user_user1="123456"
    user_user2="123456";
};
    Copy to Clipboard Toggle word wrap

  2. Edit the Kafka configuration properties file on all cluster nodes as follows:

    • Enable SASL PLAIN authentication on specific listeners using the listener.security.protocol.map property. Specify SASL_PLAINTEXT or SASL_SSL.

    • Set the sasl.enabled.mechanisms property to PLAIN.

      SASL plain configuration

      listeners=INSECURE://:9092,AUTHENTICATED://:9093,REPLICATION://:9094
listener.security.protocol.map=INSECURE:PLAINTEXT,AUTHENTICATED:SASL_PLAINTEXT,REPLICATION:PLAINTEXT
sasl.enabled.mechanisms=PLAIN
      Copy to Clipboard Toggle word wrap

  3. (Re)start the Kafka brokers using the KAFKA_OPTS environment variable to pass the JAAS configuration to Kafka brokers: 

    export KAFKA_OPTS="-Djava.security.auth.login.config=./config/jaas.conf"; ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

6.3.3. Enabling SASL SCRAM client authentication
링크 복사

Enable SASL SCRAM authentication in Kafka to enhance security for connections to Kafka nodes.

SASL authentication is enabled through the Java Authentication and Authorization Service (JAAS) using the KafkaServer JAAS context. You can define the JAAS configuration in a dedicated file or directly in the Kafka configuration.

The recommended location for the dedicated file is ./config/jaas.conf. Ensure that the file is readable by the Kafka user. Keep the JAAS configuration file in sync on all Kafka nodes.

Prerequisites

Procedure

  1. Edit or create the ./config/jaas.conf JAAS configuration file to enable the ScramLoginModule.

    Make sure this file is the same on all Kafka brokers.

    JAAS configuration

    KafkaServer {
    org.apache.kafka.common.security.scram.ScramLoginModule required;
};
    Copy to Clipboard Toggle word wrap

  2. Edit the Kafka configuration properties file on all cluster nodes as follows:

    • Enable SASL SCRAM authentication on specific listeners using the listener.security.protocol.map property. Specify SASL_PLAINTEXT or SASL_SSL.

    • Set the sasl.enabled.mechanisms option to SCRAM-SHA-256 or SCRAM-SHA-512.

      For example: 

      listeners=INSECURE://:9092,AUTHENTICATED://:9093,REPLICATION://:9094
listener.security.protocol.map=INSECURE:PLAINTEXT,AUTHENTICATED:SASL_PLAINTEXT,REPLICATION:PLAINTEXT
sasl.enabled.mechanisms=SCRAM-SHA-512
      Copy to Clipboard Toggle word wrap

  3. (Re)start the Kafka brokers using the KAFKA_OPTS environment variable to pass the JAAS configuration to Kafka brokers. 

    export KAFKA_OPTS="-Djava.security.auth.login.config=./config/jaas.conf"; ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

6.3.4. Enabling multiple SASL mechanisms
링크 복사

When using SASL authentication, you can enable more than one mechanism. Kafka can use more than one SASL mechanism simultaneously. When multiple mechanisms are enabled, you can choose the mechanism specific clients use.

To use more than one mechanism, you set up the configuration required for each mechanism. You can add different KafkaServer JAAS configurations to the same context and enable more than one mechanism in the Kafka configuration as a comma-separated list using the sasl.mechanism.inter.broker.protocol property.

JAAS configuration for more than one SASL mechanism

KafkaServer {
    org.apache.kafka.common.security.plain.PlainLoginModule required
    user_admin="123456"
    user_user1="123456"
    user_user2="123456";

    com.sun.security.auth.module.Krb5LoginModule required
    useKeyTab=true
    storeKey=true
    keyTab="/etc/security/keytabs/kafka_server.keytab"
    principal="kafka/kafka1.hostname.com@EXAMPLE.COM";

    org.apache.kafka.common.security.scram.ScramLoginModule required;
};
Copy to Clipboard Toggle word wrap

SASL mechanisms enabled

sasl.enabled.mechanisms=PLAIN,SCRAM-SHA-256,SCRAM-SHA-512
Copy to Clipboard Toggle word wrap

6.3.5. Enabling SASL for inter-broker authentication
링크 복사

Enable SASL SCRAM authentication between Kafka nodes to enhance security for inter-broker connections. As well as using SASL authentication for client connections to a Kafka cluster, you can also use SASL for inter-broker authentication. Unlike SASL for client connections, you can only choose one mechanism for inter-broker communication.

Prerequisites

  • ZooKeeper is installed on each host, and the configuration files are available.

  • If you are using a SCRAM mechanism, register SCRAM credentials on the Kafka cluster.

    For all nodes in the Kafka cluster, add the inter-broker SASL SCRAM user to ZooKeeper. This ensures that the credentials for authentication are updated for bootstrapping before the Kafka cluster is running.

    Registering an inter-broker SASL SCRAM user

    bin/kafka-configs.sh \
--zookeeper localhost:2181 \
--alter \
--add-config 'SCRAM-SHA-512=[password=changeit]' \
--entity-type users \
--entity-name kafka
    Copy to Clipboard Toggle word wrap

Procedure

  1. Specify an inter-broker SASL mechanism in the Kafka configuration using the sasl.mechanism.inter.broker.protocol property.

    Inter-broker SASL mechanism

    sasl.mechanism.inter.broker.protocol=SCRAM-SHA-512
    Copy to Clipboard Toggle word wrap

  2. (Optional) If you are using a SCRAM mechanism, register SCRAM credentials on the Kafka cluster by adding SCRAM users.

    This ensures that the credentials for authentication are updated for bootstrapping before the Kafka cluster is running.

  3. Specify the username and password for inter-broker communication in the KafkaServer JAAS context using the username and password fields.

    Inter-broker JAAS context

    KafkaServer {
    org.apache.kafka.common.security.plain.ScramLoginModule required
    username="admin"
    password="123456"
    # ...
};
    Copy to Clipboard Toggle word wrap

6.3.6. Adding SASL SCRAM users
링크 복사

This procedure outlines the steps to register new users for authentication using SASL SCRAM in Kafka. SASL SCRAM authentication enhances the security of client connections.

Prerequisites

Procedure

  • Use the kafka-configs.sh tool to add new SASL SCRAM users. 

    ./bin/kafka-configs.sh \
--bootstrap-server <broker_host>:<port> \
--alter \
--add-config 'SCRAM-SHA-512=[password=<password>]' \
--entity-type users --entity-name <username>
    Copy to Clipboard Toggle word wrap

    For example: 

    ./bin/kafka-configs.sh \
--bootstrap-server localhost:9092 \
--alter \
--add-config 'SCRAM-SHA-512=[password=123456]' \
--entity-type users \
--entity-name user1
    Copy to Clipboard Toggle word wrap

6.3.7. Deleting SASL SCRAM users
링크 복사

This procedure outlines the steps to remove users registered for authentication using SASL SCRAM in Kafka.

Prerequisites

Procedure

  • Use the kafka-configs.sh tool to delete SASL SCRAM users.

    /bin/kafka-configs.sh \

    --bootstrap-server <broker_host>:<port> \
--alter \
--delete-config 'SCRAM-SHA-512' \
--entity-type users \
--entity-name <username>
    Copy to Clipboard Toggle word wrap

    For example:

    /bin/kafka-configs.sh \

    --bootstrap-server localhost:9092 \
--alter \
--delete-config 'SCRAM-SHA-512' \
--entity-type users \
--entity-name user1
    Copy to Clipboard Toggle word wrap

6.3.8. Enabling Kerberos (GSSAPI) authentication
링크 복사

Streams for Apache Kafka supports the use of the Kerberos (GSSAPI) authentication protocol for secure single sign-on access to your Kafka cluster. GSSAPI is an API wrapper for Kerberos functionality, insulating applications from underlying implementation changes.

Kerberos is a network authentication system that allows clients and servers to authenticate to each other by using symmetric encryption and a trusted third party, the Kerberos Key Distribution Centre (KDC).

This procedure shows how to configure Streams for Apache Kafka so that Kafka clients can access Kafka and ZooKeeper using Kerberos (GSSAPI) authentication. For this setup, Kafka is installed in the /opt/kafka/ directory.

The procedure assumes that a Kerberos krb5 resource server has been set up on a Red Hat Enterprise Linux host.

The procedure shows, with examples, how to configure:

  1. Service principals
  2. Kafka brokers to use the Kerberos login
  3. ZooKeeper to use Kerberos login
  4. Producer and consumer clients to access Kafka using Kerberos authentication

The instructions describe Kerberos set up for a single ZooKeeper and Kafka installation on a single host, with additional configuration for a producer and consumer client.

Prerequisites

  • You are logged in to Red Hat Enterprise Linux as the Kafka user.

To be able to configure Kafka and ZooKeeper to authenticate and authorize Kerberos credentials, you will need:

  • Access to a Kerberos server
  • A Kerberos client on each Kafka broker host

For more information on the steps to set up a Kerberos server, and clients on broker hosts, see the example Kerberos on RHEL set up configuration.

Add service principals for authentication

From your Kerberos server, create service principals (users) for ZooKeeper, Kafka brokers, and Kafka producer and consumer clients.

Service principals must take the form SERVICE-NAME/FULLY-QUALIFIED-HOST-NAME@DOMAIN-REALM.

  1. Create the service principals, and keytabs that store the principal keys, through the Kerberos KDC.

    Make sure the domain name in the Kerberos principal is in uppercase.

    For example:

    • zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM
    • kafka/node1.example.redhat.com@EXAMPLE.REDHAT.COM
    • producer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM

    • consumer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM

      The ZooKeeper service principal must have the same hostname as the zookeeper.connect configuration in the Kafka config/server.properties file: 

      zookeeper.connect=node1.example.redhat.com:2181
      Copy to Clipboard Toggle word wrap

      If the hostname is not the same, localhost is used and authentication will fail.

  2. Create a directory on the host and add the keytab files:

    For example: 

    /opt/kafka/krb5/zookeeper-node1.keytab
/opt/kafka/krb5/kafka-node1.keytab
/opt/kafka/krb5/kafka-producer1.keytab
/opt/kafka/krb5/kafka-consumer1.keytab
    Copy to Clipboard Toggle word wrap

Configure ZooKeeper to use a Kerberos Login

Configure ZooKeeper to use the Kerberos Key Distribution Center (KDC) for authentication using the user principals and keytabs previously created for zookeeper.

  1. Create or modify the opt/kafka/config/jaas.conf file to support ZooKeeper client and server operations: 

    Client {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    1 
    
    storeKey=true
    2 
    
    useTicketCache=false
    3 
    
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab"
    4 
    
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
    5 
    
};

Server {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    useTicketCache=false
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab"
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};

QuorumServer {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab"
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};

QuorumLearner {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    keyTab="/opt/kafka/krb5/zookeeper-node1.keytab"
    principal="zookeeper/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};
    Copy to Clipboard Toggle word wrap
    1
    Set to true to get the principal key from the keytab.
    2
    Set to true to store the principal key.
    3
    Set to true to obtain the Ticket Granting Ticket (TGT) from the ticket cache.
    4
    The keyTab property points to the location of the keytab file copied from the Kerberos KDC. The location and file must be readable by the Kafka user.
    5
    The principal property is configured to match the fully-qualified principal name created on the KDC host, which follows the format SERVICE-NAME/FULLY-QUALIFIED-HOST-NAME@DOMAIN-NAME.

  2. Edit opt/kafka/config/zookeeper.properties to use the updated JAAS configuration: 

    # ...

requireClientAuthScheme=sasl
jaasLoginRenew=3600000
    1 
    
kerberos.removeHostFromPrincipal=false
    2 
    
kerberos.removeRealmFromPrincipal=false
    3 
    
quorum.auth.enableSasl=true
    4 
    
quorum.auth.learnerRequireSasl=true
    5 
    
quorum.auth.serverRequireSasl=true
quorum.auth.learner.loginContext=QuorumLearner
    6 
    
quorum.auth.server.loginContext=QuorumServer
quorum.auth.kerberos.servicePrincipal=zookeeper/_HOST
    7 
    
quorum.cnxn.threads.size=20
    Copy to Clipboard Toggle word wrap
    1
    Controls the frequency for login renewal in milliseconds, which can be adjusted to suit ticket renewal intervals. Default is one hour.
    2
    Dictates whether the hostname is used as part of the login principal name. If using a single keytab for all nodes in the cluster, this is set to true. However, it is recommended to generate a separate keytab and fully-qualified principal for each broker host for troubleshooting.
    3
    Controls whether the realm name is stripped from the principal name for Kerberos negotiations. It is recommended that this setting is set as false.
    4
    Enables SASL authentication mechanisms for the ZooKeeper server and client.
    5
    The RequireSasl properties controls whether SASL authentication is required for quorum events, such as master elections.
    6
    The loginContext properties identify the name of the login context in the JAAS configuration used for authentication configuration of the specified component. The loginContext names correspond to the names of the relevant sections in the opt/kafka/config/jaas.conf file.
    7
    Controls the naming convention to be used to form the principal name used for identification. The placeholder _HOST is automatically resolved to the hostnames defined by the server.1 properties at runtime.

  3. Start ZooKeeper with JVM parameters to specify the Kerberos login configuration: 

    export EXTRA_ARGS="-Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/opt/kafka/config/jaas.conf"; /opt/kafka/bin/zookeeper-server-start.sh -daemon /opt/kafka/config/zookeeper.properties
    Copy to Clipboard Toggle word wrap

    If you are not using the default service name (zookeeper), add the name using the -Dzookeeper.sasl.client.username=NAME parameter.

    Note

    If you are using the /etc/krb5.conf location, you do not need to specify -Djava.security.krb5.conf=/etc/krb5.conf when starting ZooKeeper, Kafka, or the Kafka producer and consumer.

Configure the Kafka broker server to use a Kerberos login

Configure Kafka to use the Kerberos Key Distribution Center (KDC) for authentication using the user principals and keytabs previously created for kafka.

  1. Modify the opt/kafka/config/jaas.conf file with the following elements: 

    KafkaServer {
    com.sun.security.auth.module.Krb5LoginModule required
    useKeyTab=true
    storeKey=true
    keyTab="/opt/kafka/krb5/kafka-node1.keytab"
    principal="kafka/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};
KafkaClient {
    com.sun.security.auth.module.Krb5LoginModule required debug=true
    useKeyTab=true
    storeKey=true
    useTicketCache=false
    keyTab="/opt/kafka/krb5/kafka-node1.keytab"
    principal="kafka/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
};
    Copy to Clipboard Toggle word wrap

  2. Configure each broker in the Kafka cluster by modifying the listener configuration in the config/server.properties file so the listeners use the SASL/GSSAPI login.

    Add the SASL protocol to the map of security protocols for the listener, and remove any unwanted protocols.

    For example: 

    # ...
broker.id=0
# ...
listeners=SECURE://:9092,REPLICATION://:9094
    1 
    
inter.broker.listener.name=REPLICATION
# ...
listener.security.protocol.map=SECURE:SASL_PLAINTEXT,REPLICATION:SASL_PLAINTEXT
    2 
    
# ..
sasl.enabled.mechanisms=GSSAPI
    3 
    
sasl.mechanism.inter.broker.protocol=GSSAPI
    4 
    
sasl.kerberos.service.name=kafka
    5 
    
...
    Copy to Clipboard Toggle word wrap
    1
    Two listeners are configured: a secure listener for general-purpose communications with clients (supporting TLS for communications), and a replication listener for inter-broker communications.
    2
    For TLS-enabled listeners, the protocol name is SASL_PLAINTEXT. For non-TLS-enabled connectors, the protocol name is SASL_PLAINTEXT. If SSL is not required, you can remove the ssl.* properties.
    3
    SASL mechanism for Kerberos authentication is GSSAPI.
    4
    Kerberos authentication for inter-broker communication.
    5
    The name of the service used for authentication requests is specified to distinguish it from other services that may also be using the same Kerberos configuration.

  3. Start the Kafka broker, with JVM parameters to specify the Kerberos login configuration: 

    export KAFKA_OPTS="-Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/opt/kafka/config/jaas.conf"; /opt/kafka/bin/kafka-server-start.sh -daemon /opt/kafka/config/server.properties
    Copy to Clipboard Toggle word wrap

    If the broker and ZooKeeper cluster were previously configured and working with a non-Kerberos-based authentication system, it is possible to start the ZooKeeper and broker cluster and check for configuration errors in the logs.

    After starting the broker and Zookeeper instances, the cluster is now configured for Kerberos authentication.

Configure Kafka producer and consumer clients to use Kerberos authentication

Configure Kafka producer and consumer clients to use the Kerberos Key Distribution Center (KDC) for authentication using the user principals and keytabs previously created for producer1 and consumer1.

  1. Add the Kerberos configuration to the producer or consumer configuration file.

    For example:

    Configuration in producer.properties

    # ...
sasl.mechanism=GSSAPI
    1 
    
security.protocol=SASL_PLAINTEXT
    2 
    
sasl.kerberos.service.name=kafka
    3 
    
sasl.jaas.config=com.sun.security.auth.module.Krb5LoginModule required \
    4 
    
    useKeyTab=true  \
    useTicketCache=false \
    storeKey=true  \
    keyTab="/opt/kafka/krb5/producer1.keytab" \
    principal="producer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
# ...
    Copy to Clipboard Toggle word wrap

    1
    Configuration for Kerberos (GSSAPI) authentication.
    2
    Kerberos uses the SASL plaintext (username/password) security protocol.
    3
    The service principal (user) for Kafka that was configured in the Kerberos KDC.
    4
    Configuration for the JAAS using the same properties defined in jaas.conf.

    Configuration in consumer.properties

    # ...
sasl.mechanism=GSSAPI
security.protocol=SASL_PLAINTEXT
sasl.kerberos.service.name=kafka
sasl.jaas.config=com.sun.security.auth.module.Krb5LoginModule required \
    useKeyTab=true  \
    useTicketCache=false \
    storeKey=true  \
    keyTab="/opt/kafka/krb5/consumer1.keytab" \
    principal="consumer1/node1.example.redhat.com@EXAMPLE.REDHAT.COM";
# ...
    Copy to Clipboard Toggle word wrap

  2. Run the clients to verify that you can send and receive messages from the Kafka brokers.

    Producer client: 

    export KAFKA_HEAP_OPTS="-Djava.security.krb5.conf=/etc/krb5.conf -Dsun.security.krb5.debug=true"; /opt/kafka/bin/kafka-console-producer.sh --producer.config /opt/kafka/config/producer.properties  --topic topic1 --bootstrap-server node1.example.redhat.com:9094
    Copy to Clipboard Toggle word wrap

    Consumer client: 

    export KAFKA_HEAP_OPTS="-Djava.security.krb5.conf=/etc/krb5.conf -Dsun.security.krb5.debug=true"; /opt/kafka/bin/kafka-console-consumer.sh --consumer.config /opt/kafka/config/consumer.properties  --topic topic1 --bootstrap-server node1.example.redhat.com:9094
    Copy to Clipboard Toggle word wrap

6.4. Authorization
링크 복사

Authorization in Kafka brokers is implemented using authorizer plugins.

In this section we describe how to use the AclAuthorizer plugin provided with Kafka.

Alternatively, you can use your own authorization plugins. For example, if you are using OAuth 2.0 token-based authentication, you can use OAuth 2.0 authorization.

6.4.1. Enabling an ACL authorizer
링크 복사

Edit the ./config/server.properties file to add an ACL authorizer. Enable the authorizer by specifying its fully-qualified name in the authorizer.class.name property:

Enabling the authorizer

authorizer.class.name=kafka.security.authorizer.AclAuthorizer
Copy to Clipboard Toggle word wrap

For AclAuthorizer, the fully-qualified name is kafka.security.authorizer.AclAuthorizer.

6.4.1.1. ACL rules
링크 복사

An ACL authorizer uses ACL rules to manage access to Kafka brokers.

ACL rules are defined in the following format:

Principal P is allowed / denied <operation> O on <kafka_resource> R from host H

For example, a rule might be set so that user John can view the topic comments from host 127.0.0.1. Host is the IP address of the machine that John is connecting from.

In most cases, the user is a producer or consumer application:

Consumer01 can write to the consumer group accounts from host 127.0.0.1

If ACL rules are not present for a given resource, all actions are denied. This behavior can be changed by setting the property allow.everyone.if.no.acl.found to true in the Kafka configuration file ./config/server.properties.

6.4.1.2. Principals
링크 복사

A principal represents the identity of a user. The format of the ID depends on the authentication mechanism used by clients to connect to Kafka:

  • User:ANONYMOUS when connected without authentication.

  • User:<username> when connected using simple authentication mechanisms, such as PLAIN or SCRAM.

    For example User:admin or User:user1.

  • User:<DistinguishedName> when connected using TLS client authentication.

    For example User:CN=user1,O=MyCompany,L=Prague,C=CZ.

  • User:<Kerberos username> when connected using Kerberos.

The DistinguishedName is the distinguished name from the client certificate.

The Kerberos username is the primary part of the Kerberos principal, which is used by default when connecting using Kerberos. You can use the sasl.kerberos.principal.to.local.rules property to configure how the Kafka principal is built from the Kerberos principal.

6.4.1.3. Authentication of users
링크 복사

To use authorization, you need to have authentication enabled and used by your clients. Otherwise, all connections will have the principal User:ANONYMOUS.

For more information on methods of authentication, see Section 6.3, “Authentication”.

6.4.1.4. Super users
링크 복사

Super users are allowed to take all actions regardless of the ACL rules.

Super users are defined in the Kafka configuration file using the property super.users.

For example: 

super.users=User:admin,User:operator
Copy to Clipboard Toggle word wrap
6.4.1.5. Replica broker authentication
링크 복사

When authorization is enabled, it is applied to all listeners and all connections. This includes the inter-broker connections used for replication of data between brokers. If enabling authorization, therefore, ensure that you use authentication for inter-broker connections and give the users used by the brokers sufficient rights. For example, if authentication between brokers uses the kafka-broker user, then super user configuration must include the username super.users=User:kafka-broker.

Note

For more information on the operations on Kafka resources you can control with ACLs, see the Apache Kafka documentation.

6.4.2. Adding ACL rules
링크 복사

When using an ACL authorizer to control access to Kafka based on Access Control Lists (ACLs), you can add new ACL rules using the kafka-acls.sh utility.

Use kafka-acls.sh parameter options to add, list and remove ACL rules, and perform other functions. The parameters require a double-hyphen convention, such as --add.

Prerequisites

Procedure

  • Run kafka-acls.sh with the --add option.

    Examples:

  • Allow user1 and user2 access to read from myTopic using the MyConsumerGroup consumer group. 

    opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --add --operation Read --topic myTopic --allow-principal User:user1 --allow-principal User:user2

opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --add --operation Describe --topic myTopic --allow-principal User:user1 --allow-principal User:user2

opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --add --operation Read --operation Describe --group MyConsumerGroup --allow-principal User:user1 --allow-principal User:user2
    Copy to Clipboard Toggle word wrap

  • Deny user1 access to read myTopic from IP address host 127.0.0.1. 

    opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --add --operation Describe --operation Read --topic myTopic --group MyConsumerGroup --deny-principal User:user1 --deny-host 127.0.0.1
    Copy to Clipboard Toggle word wrap

  • Add user1 as the consumer of myTopic with MyConsumerGroup. 

    opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --add --consumer --topic myTopic --group MyConsumerGroup --allow-principal User:user1
    Copy to Clipboard Toggle word wrap

6.4.3. Listing ACL rules
링크 복사

When using an ACL authorizer to control access to Kafka based on Access Control Lists (ACLs), you can list existing ACL rules using the kafka-acls.sh utility.

Prerequisites

Procedure

  • Run kafka-acls.sh with the --list option.

    For example: 

    opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --list --topic myTopic

Current ACLs for resource `Topic:myTopic`:

User:user1 has Allow permission for operations: Read from hosts: *
User:user2 has Allow permission for operations: Read from hosts: *
User:user2 has Deny permission for operations: Read from hosts: 127.0.0.1
User:user1 has Allow permission for operations: Describe from hosts: *
User:user2 has Allow permission for operations: Describe from hosts: *
User:user2 has Deny permission for operations: Describe from hosts: 127.0.0.1
    Copy to Clipboard Toggle word wrap

6.4.4. Removing ACL rules
링크 복사

When using an ACL authorizer to control access to Kafka based on Access Control Lists (ACLs), you can remove existing ACL rules using the kafka-acls.sh utility.

Prerequisites

Procedure

  • Run kafka-acls.sh with the --remove option.

    Examples:

  • Remove the ACL allowing Allow user1 and user2 access to read from myTopic using the MyConsumerGroup consumer group. 

    opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --remove --operation Read --topic myTopic --allow-principal User:user1 --allow-principal User:user2

opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --remove --operation Describe --topic myTopic --allow-principal User:user1 --allow-principal User:user2

opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --remove --operation Read --operation Describe --group MyConsumerGroup --allow-principal User:user1 --allow-principal User:user2
    Copy to Clipboard Toggle word wrap

  • Remove the ACL adding user1 as the consumer of myTopic with MyConsumerGroup. 

    opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --remove --consumer --topic myTopic --group MyConsumerGroup --allow-principal User:user1
    Copy to Clipboard Toggle word wrap

  • Remove the ACL denying user1 access to read myTopic from IP address host 127.0.0.1. 

    opt/kafka/bin/kafka-acls.sh --bootstrap-server localhost:9092 --remove --operation Describe --operation Read --topic myTopic --group MyConsumerGroup --deny-principal User:user1 --deny-host 127.0.0.1
    Copy to Clipboard Toggle word wrap

6.5. ZooKeeper authentication
링크 복사

By default, connections between ZooKeeper and Kafka are not authenticated. However, Kafka and ZooKeeper support Java Authentication and Authorization Service (JAAS) which can be used to set up authentication using Simple Authentication and Security Layer (SASL). ZooKeeper supports authentication using the DIGEST-MD5 SASL mechanism with locally stored credentials.

6.5.1. JAAS Configuration
링크 복사

SASL authentication for ZooKeeper connections has to be configured in the JAAS configuration file. By default, Kafka will use the JAAS context named Client for connecting to ZooKeeper. The Client context should be configured in the ./config/jass.conf file. The context has to enable the PLAIN SASL authentication, as in the following example: 

Client {
    org.apache.kafka.common.security.plain.PlainLoginModule required
    username="kafka"
    password="123456";
};
Copy to Clipboard Toggle word wrap

6.5.2. Enabling ZooKeeper authentication
링크 복사

This procedure describes how to enable authentication using the SASL DIGEST-MD5 mechanism when connecting to ZooKeeper.

Prerequisites

  • Client-to-server authentication is enabled in ZooKeeper

Enabling SASL DIGEST-MD5 authentication

  1. On all Kafka broker nodes, create or edit the ./config/jaas.conf JAAS configuration file and add the following context: 

    Client {
    org.apache.kafka.common.security.plain.PlainLoginModule required
    username="<Username>"
    password="<Password>";
};
    Copy to Clipboard Toggle word wrap

    The username and password should be the same as configured in ZooKeeper.

    Following example shows the Client context: 

    Client {
    org.apache.kafka.common.security.plain.PlainLoginModule required
    username="kafka"
    password="123456";
};
    Copy to Clipboard Toggle word wrap

  2. Restart all Kafka broker nodes one by one. To pass the JAAS configuration to Kafka brokers, use the KAFKA_OPTS environment variable. 

    export KAFKA_OPTS="-Djava.security.auth.login.config=./config/jaas.conf"; ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

    For information on restarting brokers in a multi-node cluster, see Section 4.3, “Performing a graceful rolling restart of Kafka brokers”.

6.6. ZooKeeper authorization
링크 복사

When authentication is enabled between Kafka and ZooKeeper, you can use ZooKeeper Access Control List (ACL) rules to automatically control access to Kafka’s metadata stored in ZooKeeper.

6.6.1. ACL Configuration
링크 복사

Enforcement of ZooKeeper ACL rules is controlled by the zookeeper.set.acl property in the config/server.properties Kafka configuration file.

The property is disabled by default and enabled by setting to true: 

zookeeper.set.acl=true
Copy to Clipboard Toggle word wrap

If ACL rules are enabled, when a znode is created in ZooKeeper only the Kafka user who created it can modify or delete it. All other users have read-only access.

Kafka sets ACL rules only for newly created ZooKeeper znodes. If the ACLs are only enabled after the first start of the cluster, the zookeeper-security-migration.sh tool can set ACLs on all existing znodes.

Confidentiality of data in ZooKeeper

Data stored in ZooKeeper includes:

  • Topic names and their configuration
  • Salted and hashed user credentials when SASL SCRAM authentication is used.

But ZooKeeper does not store any records sent and received using Kafka. The data stored in ZooKeeper is assumed to be non-confidential.

If the data is to be regarded as confidential (for example because topic names contain customer IDs), the only option available for protection is isolating ZooKeeper on the network level and allowing access only to Kafka brokers.

6.6.2. Enabling ZooKeeper ACLs for a new Kafka cluster
링크 복사

This procedure describes how to enable ZooKeeper ACLs in Kafka configuration for a new Kafka cluster. Use this procedure only before the first start of the Kafka cluster. For enabling ZooKeeper ACLs in a cluster that is already running, see Section 6.6.3, “Enabling ZooKeeper ACLs in an existing Kafka cluster”.

Prerequisites

Procedure

  1. Edit the Kafka configuration properties file to set the zookeeper.set.acl field to true on all cluster nodes. 

    zookeeper.set.acl=true
    Copy to Clipboard Toggle word wrap
  2. Start the Kafka brokers.

6.6.3. Enabling ZooKeeper ACLs in an existing Kafka cluster
링크 복사

This procedure describes how to enable ZooKeeper ACLs in Kafka configuration for a Kafka cluster that is running. Use the zookeeper-security-migration.sh tool to set ZooKeeper ACLs on all existing znodes. The zookeeper-security-migration.sh is available as part of Streams for Apache Kafka, and can be found in the bin directory.

Prerequisites

Enabling the ZooKeeper ACLs

  1. Edit the Kafka configuration properties file to set the zookeeper.set.acl field to true on all cluster nodes. 

    zookeeper.set.acl=true
    Copy to Clipboard Toggle word wrap

  2. Restart all Kafka brokers one by one.

    For information on restarting brokers in a multi-node cluster, see Section 4.3, “Performing a graceful rolling restart of Kafka brokers”.

  3. Set the ACLs on all existing ZooKeeper znodes using the zookeeper-security-migration.sh tool. 

    KAFKA_OPTS="-Djava.security.auth.login.config=./config/jaas.conf"; ./bin/zookeeper-security-migration.sh --zookeeper.acl=secure --zookeeper.connect=<zookeeper_url>
    Copy to Clipboard Toggle word wrap

    Replace <zookeeper_url> with the connection string for your ZooKeeper cluster, such as localhost:2181.

Chapter 7. Enabling OAuth 2.0 token-based access
링크 복사

Streams for Apache Kafka supports OAuth 2.0 for securing Kafka clusters by integrating with an OAUth 2.0 authorization server. Kafka brokers and clients both need to be configured to use OAuth 2.0.

OAuth 2.0 enables standardized token-based authentication and authorization between applications, using a central authorization server to issue tokens that grant limited access to resources. You can define specific scopes for fine-grained access control. Scopes correspond to different levels of access to Kafka topics or operations within the cluster.

OAuth 2.0 also supports single sign-on and integration with identity providers.

7.1. Configuring an OAuth 2.0 authorization server
링크 복사

Before you can use OAuth 2.0 token-based access, you must configure an authorization server for integration with Streams for Apache Kafka. The steps are dependent on the chosen authorization server. Consult the product documentation for the authorization server for information on how to set up OAuth 2.0 access.

Prepare the authorization server to work with Streams for Apache Kafka by defining OAUth 2.0 clients for Kafka and each Kafka client component of your application. In relation to the authorization server, the Kafka cluster and Kafka clients are both regarded as OAuth 2.0 clients.

In general, configure OAuth 2.0 clients in the authorization server with the following client credentials enabled:

  • Client ID (for example, kafka for the Kafka cluster)
  • Client ID and secret as the authentication mechanism
Note

You only need to use a client ID and secret when using a non-public introspection endpoint of the authorization server. The credentials are not typically required when using public authorization server endpoints, as with fast local JWT token validation.

7.2. Using OAuth 2.0 token-based authentication
링크 복사

Streams for Apache Kafka supports the use of OAuth 2.0 for token-based authentication. An OAuth 2.0 authorization server handles the granting of access and inquiries about access. Kafka clients authenticate to Kafka brokers. Brokers and clients communicate with the authorization server, as necessary, to obtain or validate access tokens.

For a deployment of Streams for Apache Kafka, OAuth 2.0 integration provides the following support:

  • Server-side OAuth 2.0 authentication for Kafka brokers
  • Client-side OAuth 2.0 authentication for Kafka MirrorMaker, Kafka Connect, and the Kafka Bridge

Streams for Apache Kafka on RHEL includes two OAuth 2.0 libraries:

kafka-oauth-client
Provides a custom login callback handler class named io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler. To handle the OAUTHBEARER authentication mechanism, use the login callback handler with the OAuthBearerLoginModule provided by Apache Kafka.
kafka-oauth-common
A helper library that provides some of the functionality needed by the kafka-oauth-client library.

The provided client libraries also have dependencies on some additional third-party libraries, such as: keycloak-core, jackson-databind, and slf4j-api.

We recommend using a Maven project to package your client to ensure that all the dependency libraries are included. Dependency libraries might change in future versions.

7.2.1. Configuring OAuth 2.0 authentication on listeners
링크 복사

To secure Kafka brokers with OAuth 2.0 authentication, configure a Kafka listener to use OAUth 2.0 authentication and a client authentication mechanism in the Kafka server.properties file, and add further configuration depending on the authentication mechanism and type of token validation used in the authentication.

A minimum configuration is required. You can also configure a TLS listener, where TLS is used for inter-broker communication. We recommend using OAuth 2.0 authentication together with TLS encryption. Without encryption, the connection is vulnerable to network eavesdropping and unauthorized access through token theft.

When you have defined the type of authentication as OAuth 2.0, you add configuration based on the type of validation, either as fast local JWT validation or token validation using an introspection endpoint.

Enabling SASL authentication mechanisms

Use one or both of the following SASL mechanisms for clients to exchange credentials and establish authenticated sessions with Kafka.

OAUTHBEARER

Using the OAUTHBEARER authentication mechanism, credentials exchange uses a bearer token provided by an OAuth callback handler. Token provision can be configured to use the following methods:

  • Client ID and secret (using the OAuth 2.0 client credentials mechanism)
  • Client ID and client assertion
  • Long-lived access token
  • Long-lived refresh token obtained manually

OAUTHBEARER is recommended as it provides a higher level of security than PLAIN, though it can only be used by Kafka clients that support the OAUTHBEARER mechanism at the protocol level. Client credentials are never shared with Kafka.

PLAIN

PLAIN is a simple authentication mechanism used by all Kafka client tools. Consider using PLAIN only with Kafka clients that do not support OAUTHBEARER. Using the PLAIN authentication mechanism, credentials exchange can be configured to use the following methods:

  • Client ID and secret (using the OAuth 2.0 client credentials mechanism)
  • Long-lived access token
    Regardless of the method used, the client must provide username and password properties to Kafka.

Credentials are handled centrally behind a compliant authorization server, similar to how OAUTHBEARER authentication is used. The username extraction process depends on the authorization server configuration.

Example listener configuration for the OAUTHBEARER mechanism

sasl.enabled.mechanisms=OAUTHBEARER
1 

listeners=CLIENT://0.0.0.0:9092
2 

listener.security.protocol.map=CLIENT:SASL_PLAINTEXT
3 

listener.name.client.sasl.enabled.mechanisms=OAUTHBEARER
4 

sasl.mechanism.inter.broker.protocol=OAUTHBEARER
5 

inter.broker.listener.name=CLIENT
6 

listener.name.client.oauthbearer.sasl.server.callback.handler.class=io.strimzi.kafka.oauth.server.JaasServerOauthValidatorCallbackHandler
7 

listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule
  # ...
Copy to Clipboard Toggle word wrap

1
Enables the OAUTHBEARER mechanism for credentials exchange over SASL.
2
Configures a listener for client applications to connect to. The system hostname is used as an advertised hostname, which clients must resolve in order to reconnect. The listener is named CLIENT in this example.
3
Specifies the channel protocol for the listener. SASL_SSL is for TLS. SASL_PLAINTEXT is used for an unencrypted connection (no TLS), but there is risk of eavesdropping and interception at the TCP connection layer.
4
Specifies the OAUTHBEARER mechanism for the CLIENT listener. The client name (CLIENT) is usually specified in uppercase in the listeners property, in lowercase for listener.name properties (listener.name.client), and in lowercase when part of a listener.name.client.* property.
5
Specifies the OAUTHBEARER mechanism for inter-broker communication.
6
Specifies the listener for inter-broker communication. The specification is required for the configuration to be valid.
7
Configures OAuth 2.0 authentication on the client listener.

Configuring OAuth 2.0 with properties or variables

Configure OAuth 2.0 settings using Java Authentication and Authorization Service (JAAS) properties or environment variables.

  • JAAS properties are configured in the server.properties configuration file, and passed as key-values pairs of the listener.name.<listener_name>.oauthbearer.sasl.jaas.config property.

  • If using environment variables, you still need to provide the listener.name.<listener_name>.oauthbearer.sasl.jaas.config property in the server.properties file, but you can omit the other JAAS properties.

    You can use capitalized or upper-case environment variable naming conventions.

The Streams for Apache Kafka OAuth 2.0 libraries use properties that start with:

Configuring fast local JWT token validation

Fast local JWT token validation involves checking a JWT token signature locally to ensure that the token meets the following criteria:

  • Contains a typ (type) or token_type header claim value of Bearer to indicate it is an access token
  • Is currently valid and not expired
  • Has an issuer that matches a validIssuerURI

You specify a validIssuerURI attribute when you configure the listener, so that any tokens not issued by the authorization server are rejected.

The authorization server does not need to be contacted during fast local JWT token validation. You activate fast local JWT token validation by specifying a jwksEndpointUri attribute, the endpoint exposed by the OAuth 2.0 authorization server. The endpoint contains the public keys used to validate signed JWT tokens, which are sent as credentials by Kafka clients.

All communication with the authorization server should be performed using TLS encryption. You can configure a certificate truststore and point to the truststore file.

You might want to configure a userNameClaim to properly extract a username from the JWT token. If required, you can use a JsonPath expression like "['user.info'].['user.id']" to retrieve the username from nested JSON attributes within a token.

If you want to use Kafka ACL authorization, identify the user by their username during authentication. (The sub claim in JWT tokens is typically a unique ID, not a username.)

Example configuration for fast local JWT token validation

# ...
listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
1 

  oauth.valid.issuer.uri="https://<auth_server_address>/<issuer-context>" \
2 

  oauth.jwks.endpoint.uri="https://<oauth_server_address>/<path_to_jwks_endpoint>" \
3 

  oauth.jwks.refresh.seconds="300" \
4 

  oauth.jwks.refresh.min.pause.seconds="1" \
5 

  oauth.jwks.expiry.seconds="360" \
6 

  oauth.username.claim="preferred_username" \
7 

  oauth.ssl.truststore.location="<path_to_truststore_p12_file>" \
8 

  oauth.ssl.truststore.password="<truststore_password>" \
9 

  oauth.ssl.truststore.type="PKCS12" ;
10 

listener.name.client.oauthbearer.connections.max.reauth.ms=3600000
11
Copy to Clipboard Toggle word wrap

1
Configures the CLIENT listener for OAuth 2.0. Connectivity with the authorization server should use secure HTTPS connections.
2
A valid issuer URI. Only access tokens issued by this issuer will be accepted. (Always required.)
3
The JWKS endpoint URL.
4
The period between endpoint refreshes (default 300).
5
The minimum pause in seconds between consecutive attempts to refresh JWKS public keys. When an unknown signing key is encountered, the JWKS keys refresh is scheduled outside the regular periodic schedule with at least the specified pause since the last refresh attempt. The refreshing of keys follows the rule of exponential backoff, retrying on unsuccessful refreshes with ever increasing pause, until it reaches oauth.jwks.refresh.seconds. The default value is 1.
6
The duration the JWKs certificates are considered valid before they expire. Default is 360 seconds. If you specify a longer time, consider the risk of allowing access to revoked certificates.
7
The token claim (or key) that contains the actual user name in the token. The user name is the principal used to identify the user. The value will depend on the authentication flow and the authorization server used. If required, you can use a JsonPath expression like "['user.info'].['user.id']" to retrieve the username from nested JSON attributes within a token.
8
The location of the truststore used in the TLS configuration.
9
Password to access the truststore.
10
The truststore type in PKCS #12 format.
11
(Optional) Enforces session expiry when a token expires, and also activates the Kafka re-authentication mechanism. If the specified value is less than the time left for the access token to expire, then the client will have to re-authenticate before the actual token expiry. By default, the session does not expire when the access token expires, and the client does not attempt re-authentication.

Configuring token validation using an introspection endpoint

Token validation using an OAuth 2.0 introspection endpoint treats a received access token as opaque. The Kafka broker sends an access token to the introspection endpoint, which responds with the token information necessary for validation. Importantly, it returns up-to-date information if the specific access token is valid, and also information about when the token expires.

To configure OAuth 2.0 introspection-based validation, you specify an introspection endpoint URI rather than the JWKs endpoint URI specified for fast local JWT token validation. Depending on the authorization server, you typically have to specify a client ID and client secret, because the introspection endpoint is usually protected.

Example token validation configuration using an introspection endpoint

# ...
listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.introspection.endpoint.uri="https://<oauth_server_address>/<introspection_endpoint>" \
1 

  oauth.client.id="kafka-broker" \
2 

  oauth.client.secret="kafka-broker-secret" \
3 

  oauth.ssl.truststore.location="<path_to_truststore_p12_file>" \
4 

  oauth.ssl.truststore.password="<truststore_password>" \
5 

  oauth.ssl.truststore.type="PKCS12" \
6 

  oauth.username.claim="preferred_username" ;
7
Copy to Clipboard Toggle word wrap

1
URI of the token introspection endpoint.
2
Client ID of the Kafka broker.
3
Secret for the Kafka broker.
4
The location of the truststore used in the TLS configuration.
5
Password to access the truststore.
6
The truststore type in PKCS #12 format.
7
The token claim (or key) that contains the actual user name in the token. The user name is the principal used to identify the user. The value will depend on the authentication flow and the authorization server used. If required, you can use a JsonPath expression like "['user.info'].['user.id']" to retrieve the username from nested JSON attributes within a token.

Authenticating brokers to the authorization server protected endpoints

Usually, the certificates endpoint of the authorization server (oauth.jwks.endpoint.uri) is publicly accessible, while the introspection endpoint (oauth.introspection.endpoint.uri) is protected. However, this may vary depending on the authorization server configuration.

The Kafka broker can authenticate to the authorization server’s protected endpoints in one of two ways using HTTP authentication schemes:

  • HTTP Basic authentication uses a client ID and secret.
  • HTTP Bearer authentication uses a bearer token.

To configure HTTP Basic authentication, set the following properties:

  • oauth.client.id
  • oauth.client.secret

For HTTP Bearer authentication, set one of the following properties:

  • oauth.server.bearer.token.location to specify the file path on disk containing the bearer token.
  • oauth.server.bearer.token to specify the bearer token in clear text.

Including additional configuration options

Specify additional settings depending on the authentication requirements and the authorization server you are using. Some of these properties apply only to certain authentication mechanisms or when used in combination with other properties.

For example, when using OAUth over PLAIN, access tokens are passed as password property values with or without an $accessToken: prefix.

  • If you configure a token endpoint (oauth.token.endpoint.uri) in the listener configuration, you need the prefix.
  • If you don’t configure a token endpoint in the listener configuration, you don’t need the prefix. The Kafka broker interprets the password as a raw access token.

If the password is set as the access token, the username must be set to the same principal name that the Kafka broker obtains from the access token. You can specify username extraction options in your listener using the oauth.username.claim, oauth.username.prefix, oauth.fallback.username.claim, oauth.fallback.username.prefix, and oauth.userinfo.endpoint.uri properties. The username extraction process also depends on your authorization server; in particular, how it maps client IDs to account names.

Note

The PLAIN mechanism does not support password grant authentication. Use either client credentials (client ID + secret) or an access token for authentication.

Example additional configuration settings

listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  # ...
  oauth.token.endpoint.uri="https://<auth_server_address>/<path_to_token_endpoint>" \
1 

  oauth.custom.claim.check="@.custom == 'custom-value'" \
2 

  oauth.scope="<scope>" \
3 

  oauth.check.audience="true" \
4 

  oauth.audience="<audience>" \
5 

  oauth.client.id="kafka-broker" \
6 

  oauth.client.secret="kafka-broker-secret" \
7 

  oauth.connect.timeout.seconds=60 \
8 

  oauth.read.timeout.seconds=60 \
9 

  oauth.http.retries=2 \
10 

  oauth.http.retry.pause.millis=300 \
11 

  oauth.groups.claim="$.groups" \
12 

  oauth.groups.claim.delimiter="," \
13 

  oauth.include.accept.header="false" ;
14 

  oauth.check.issuer=false \
15 

  oauth.username.prefix="user-account-" \
16 

  oauth.fallback.username.claim="client_id" \
17 

  oauth.fallback.username.prefix="service-account-" \
18 

  oauth.valid.token.type="bearer" \
19 

  oauth.userinfo.endpoint.uri="https://<auth_server_address>/<path_to_userinfo_endpoint>" ;
20
Copy to Clipboard Toggle word wrap

1
The OAuth 2.0 token endpoint URL to your authorization server. For production, always use https:// urls. Required when KeycloakAuthorizer is used, or an OAuth 2.0 enabled listener is used for inter-broker communication.
2
(Optional) Custom claim checking. A JsonPath filter query that applies additional custom rules to the JWT access token during validation. If the access token does not contain the necessary data, it is rejected. When using the introspection endpoint method, the custom check is applied to the introspection endpoint response JSON.
3
(Optional) A scope parameter passed to the token endpoint. A scope is used when obtaining an access token for inter-broker authentication. It is also used in the name of a client for OAuth 2.0 over PLAIN client authentication using a clientId and secret. This only affects the ability to obtain the token, and the content of the token, depending on the authorization server. It does not affect token validation rules by the listener.
4
(Optional) Audience checking. If your authorization server provides an aud (audience) claim, and you want to enforce an audience check, set ouath.check.audience to true. Audience checks identify the intended recipients of tokens. As a result, the Kafka broker will reject tokens that do not have its clientId in their aud claims. Default is false.
5
(Optional) An audience parameter passed to the token endpoint. An audience is used when obtaining an access token for inter-broker authentication. It is also used in the name of a client for OAuth 2.0 over PLAIN client authentication using a clientId and secret. This only affects the ability to obtain the token, and the content of the token, depending on the authorization server. It does not affect token validation rules by the listener.
6
The configured client ID of the Kafka broker, which is the same for all brokers. This is the client registered with the authorization server as kafka-broker. Required when an introspection endpoint is used for token validation, or when KeycloakAuthorizer is used.
7
The configured secret for the Kafka broker, which is the same for all brokers. When the broker must authenticate to the authorization server, either a client secret, access token or a refresh token has to be specified.
8
(Optional) The connect timeout in seconds when connecting to the authorization server. The default value is 60.
9
(Optional) The read timeout in seconds when connecting to the authorization server. The default value is 60.
10
The maximum number of times to retry a failed HTTP request to the authorization server. The default value is 0, meaning that no retries are performed. To use this option effectively, consider reducing the timeout times for the oauth.connect.timeout.seconds and oauth.read.timeout.seconds options. However, note that retries may prevent the current worker thread from being available to other requests, and if too many requests stall, it could make the Kafka broker unresponsive.
11
The time to wait before attempting another retry of a failed HTTP request to the authorization server. By default, this time is set to zero, meaning that no pause is applied. This is because many issues that cause failed requests are per-request network glitches or proxy issues that can be resolved quickly. However, if your authorization server is under stress or experiencing high traffic, you may want to set this option to a value of 100 ms or more to reduce the load on the server and increase the likelihood of successful retries.
12
A JsonPath query used to extract groups information from JWT token or introspection endpoint response. Not set by default. This can be used by a custom authorizer to make authorization decisions based on user groups.
13
A delimiter used to parse groups information when returned as a single delimited string. The default value is ',' (comma).
14
(Optional) Sets oauth.include.accept.header to false to remove the Accept header from requests. You can use this setting if including the header is causing issues when communicating with the authorization server.
15
If your authorization server does not provide an iss claim, it is not possible to perform an issuer check. In this situation, set oauth.check.issuer to false and do not specify a oauth.valid.issuer.uri. Default is true.
16
The prefix used when constructing the user ID. This only takes effect if oauth.username.claim is configured.
17
An authorization server may not provide a single attribute to identify both regular users and clients. When a client authenticates in its own name, the server might provide a client ID attribute. When a user authenticates using a username and password, to obtain a refresh token or an access token, the server might provide a username attribute in addition to a client ID. Use this fallback option to specify the username claim (attribute) to use if a primary user ID attribute is not available. If required, you can use a JsonPath expression like "['client.info'].['client.id']" to retrieve the fallback username from nested JSON attributes within a token.
18
In situations where oauth.fallback.username.claim is applicable, it may also be necessary to prevent name collisions between the values of the username claim, and those of the fallback username claim. Consider a situation where a client called producer exists, but also a regular user called producer exists. In order to differentiate between the two, you can use this property to add a prefix to the user ID of the client.
19
(Only applicable when using oauth.introspection.endpoint.uri) Depending on the authorization server you are using, the introspection endpoint may or may not return the token type attribute, or it may contain different values. You can specify a valid token type value that the response from the introspection endpoint has to contain.
20
(Only applicable when using oauth.introspection.endpoint.uri) The authorization server may be configured or implemented in such a way to not provide any identifiable information in an introspection endpoint response. In order to obtain the user ID, you can configure the URI of the userinfo endpoint as a fallback. The oauth.username.claim, oauth.username.prefix, oauth.fallback.username.claim, and oauth.fallback.username.prefix settings are also applied to the response of the userinfo endpoint.

Configuring listeners for inter-broker communication

The following example uses the OAUTHBEARER mechanism for fast token validation in a minimum configuration where inter-broker communication goes through the same listener as application clients.

The oauth.client.id, oauth.client.secret, and auth.token.endpoint.uri properties relate to inter-broker communication.

Example inter-broker configuration using the OAUTHBEARER mechanism

sasl.enabled.mechanisms=OAUTHBEARER
listeners=CLIENT://0.0.0.0:9092
listener.security.protocol.map=CLIENT:SASL_PLAINTEXT
listener.name.client.sasl.enabled.mechanisms=OAUTHBEARER
sasl.mechanism.inter.broker.protocol=OAUTHBEARER
inter.broker.listener.name=CLIENT
listener.name.client.oauthbearer.sasl.server.callback.handler.class=io.strimzi.kafka.oauth.server.JaasServerOauthValidatorCallbackHandler
listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
1 

  oauth.valid.issuer.uri="https://<auth_server_address>/<issuer-context>" \
  oauth.jwks.endpoint.uri="https://<oauth_server_address>/<path_to_jwks_endpoint>" \
  oauth.username.claim="preferred_username"  \
  oauth.client.id="kafka-broker" \
2 

  oauth.client.secret="kafka-secret" \
3 

  oauth.token.endpoint.uri="https://<oauth_server_address>/<token_endpoint>" ;
4 

listener.name.client.oauthbearer.sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
5 

listener.name.client.oauthbearer.connections.max.reauth.ms=3600000
Copy to Clipboard Toggle word wrap

1
Configures authentication settings for client and inter-broker communication.
2
Client ID of the Kafka broker, which is the same for all brokers. This is the client registered with the authorization server as kafka-broker.
3
Secret for the Kafka broker, which is the same for all brokers.
4
The OAuth 2.0 token endpoint URL to your authorization server. For production, always use https:// urls.
5
Enables (and is only required for) OAuth 2.0 authentication for inter-broker communication.

The following example shows a minimum configuration for a TLS listener used for inter-broker communication.

Example inter-broker configuration configuration with TLS

sasl.enabled.mechanisms=OAUTHBEARER
listeners=REPLICATION://kafka:9091,CLIENT://kafka:9092
1 

listener.security.protocol.map=REPLICATION:SSL,CLIENT:SASL_PLAINTEXT
2 

listener.name.client.sasl.enabled.mechanisms=OAUTHBEARER
inter.broker.listener.name=REPLICATION
listener.name.replication.ssl.keystore.password=<keystore_password>
3 

listener.name.replication.ssl.truststore.password=<truststore_password>
listener.name.replication.ssl.keystore.type=JKS
listener.name.replication.ssl.truststore.type=JKS
listener.name.replication.ssl.secure.random.implementation=SHA1PRNG
4 

listener.name.replication.ssl.endpoint.identification.algorithm=HTTPS
5 

listener.name.replication.ssl.keystore.location=<path_to_keystore>
6 

listener.name.replication.ssl.truststore.location=<path_to_truststore>
7 

listener.name.replication.ssl.client.auth=required
8 

listener.name.client.oauthbearer.sasl.server.callback.handler.class=io.strimzi.kafka.oauth.server.JaasServerOauthValidatorCallbackHandler
listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.valid.issuer.uri="https://<auth_server_address>/<issuer-context>" \
  oauth.jwks.endpoint.uri="https://<oauth_server_address>/<path_to_jwks_endpoint>" \
  oauth.username.claim="preferred_username" ;
Copy to Clipboard Toggle word wrap

1
Separate configurations are required for inter-broker communication and client applications.
2
Configures the REPLICATION listener to use TLS, and the CLIENT listener to use SASL over an unencrypted channel. The client could use an encrypted channel (SASL_SSL) in a production environment.
3
The ssl. properties define the TLS configuration.
4
Random number generator implementation. If not set, the Java platform SDK default is used.
5
Hostname verification. If set to an empty string, the hostname verification is turned off. If not set, the default value is HTTPS, which enforces hostname verification for server certificates.
6
Path to the keystore for the listener.
7
Path to the truststore for the listener.
8
Specifies that clients of the REPLICATION listener have to authenticate with a client certificate when establishing a TLS connection (used for inter-broker connectivity).

The following example uses the PLAIN mechanism for fast token validation in a minimum configuration where inter-broker communication goes through the same listener as application clients.

Example inter-broker configuration configuration using the PLAIN mechanism

listeners=CLIENT://0.0.0.0:9092
listener.security.protocol.map=CLIENT:SASL_PLAINTEXT
listener.name.client.sasl.enabled.mechanisms=OAUTHBEARER,PLAIN
sasl.mechanism.inter.broker.protocol=OAUTHBEARER
inter.broker.listener.name=CLIENT
listener.name.client.oauthbearer.sasl.server.callback.handler.class=io.strimzi.kafka.oauth.server.JaasServerOauthValidatorCallbackHandler
listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.valid.issuer.uri="https:<auth_server_address>/<issuer-context>" \
  oauth.jwks.endpoint.uri="https://<auth_server>/<path_to_jwks_endpoint>" \
  oauth.username.claim="preferred_username"  \
  oauth.client.id="kafka-broker" \
  oauth.client.secret="kafka-secret" \
  oauth.token.endpoint.uri="https://<oauth_server_address>/<token_endpoint>" ;
listener.name.client.oauthbearer.sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
1 

listener.name.client.plain.sasl.server.callback.handler.class=io.strimzi.kafka.oauth.server.plain.JaasServerOauthOverPlainValidatorCallbackHandler
2 

listener.name.client.plain.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
3 

  oauth.valid.issuer.uri="https://<auth_server_address>/<issuer-context>" \
  oauth.jwks.endpoint.uri="https://<oauth_server_address>/<path_to_jwks_endpoint>" \
  oauth.username.claim="preferred_username"  \
  oauth.token.endpoint.uri="https://<oauth_server_address>/<token_endpoint>" ;
4 

listener.name.client.oauthbearer.connections.max.reauth.ms=3600000
Copy to Clipboard Toggle word wrap

1
Enables OAuth 2.0 authentication for inter-broker communication.
2
Configures the server callback handler for PLAIN authentication.
3
Configures authentication settings for client communication using PLAIN authentication. oauth.token.endpoint.uri is an optional property that enables OAuth 2.0 over PLAIN using the OAuth 2.0 client credentials mechanism.
4
The OAuth 2.0 token endpoint URL to your authorization server. If specified, clients can authenticate over PLAIN by passing an access token as the password using an $accessToken: prefix.

7.2.2. Configuring OAuth 2.0 on client applications
링크 복사

To configure OAuth 2.0 on client applications, you must specify the following:

  • SASL (Simple Authentication and Security Layer) security protocols
  • SASL mechanisms
  • A JAAS (Java Authentication and Authorization Service) module
  • Authentication properties to access the authorization server

Configuring SASL protocols

Specify SASL protocols in the client configuration:

  • SASL_SSL for authentication over TLS encrypted connections
  • SASL_PLAINTEXT for authentication over unencrypted connections

Use SASL_SSL for production and SASL_PLAINTEXT for local development only.

When using SASL_SSL, additional ssl.truststore configuration is needed. The truststore configuration is required for secure connection (https://) to the OAuth 2.0 authorization server. To verify the OAuth 2.0 authorization server, add the CA certificate for the authorization server to the truststore in your client configuration. You can configure a truststore in PEM or PKCS #12 format.

Configuring SASL authentication mechanisms

Specify SASL mechanisms in the client configuration:

  • OAUTHBEARER for credentials exchange using a bearer token
  • PLAIN to pass client credentials (clientId + secret) or an access token

Configuring a JAAS module

Specify a JAAS module that implements the SASL authentication mechanism as a sasl.jaas.config property value:

  • org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule implements the OAUTHBEARER mechanism
  • org.apache.kafka.common.security.plain.PlainLoginModule implements the PLAIN mechanism
Note

For the OAUTHBEARER mechanism, Streams for Apache Kafka provides a callback handler for clients that use Kafka Client Java libraries to enable credentials exchange. For clients in other languages, custom code may be required to obtain the access token. For the PLAIN mechanism, Streams for Apache Kafka provides server-side callbacks to enable credentials exchange.

To be able to use the OAUTHBEARER mechanism, you must also add the custom io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler class as the callback handler. JaasClientOauthLoginCallbackHandler handles OAuth callbacks to the authorization server for access tokens during client login. This enables automatic token renewal, ensuring continuous authentication without user intervention. Additionally, it handles login credentials for clients using the OAuth 2.0 password grant method.

Configuring authentication properties

Configure the client to use credentials or access tokens for OAuth 2.0 authentication.

Using client credentials
Using client credentials involves configuring the client with the necessary credentials (client ID and secret, or client ID and client assertion) to obtain a valid access token from an authorization server. This is the simplest mechanism.
Using access tokens
Using access tokens, the client is configured with a valid long-lived access token or refresh token obtained from an authorization server. Using access tokens adds more complexity because there is an additional dependency on authorization server tools. If you are using long-lived access tokens, you may need to configure the client in the authorization server to increase the maximum lifetime of the token.

The only information ever sent to Kafka is the access token. The credentials used to obtain the token are never sent to Kafka. When a client obtains an access token, no further communication with the authorization server is needed.

SASL authentication properties support the following authentication methods:

  • OAuth 2.0 client credentials
  • Access token or Service account token
  • Refresh token
  • OAuth 2.0 password grant (deprecated)

Add the authentication properties as JAAS configuration (sasl.jaas.config and sasl.login.callback.handler.class).

If the client application is not configured with an access token directly, the client exchanges one of the following sets of credentials for an access token during Kafka session initiation:

  • Client ID and secret
  • Client ID and client assertion
  • Client ID, refresh token, and (optionally) a secret
  • Username and password, with client ID and (optionally) a secret
Note

You can also specify authentication properties as environment variables, or as Java system properties. For Java system properties, you can set them using setProperty and pass them on the command line using the -D option.

Example client credentials configuration using the client secret

security.protocol=SASL_SSL
1 

sasl.mechanism=OAUTHBEARER
2 

ssl.truststore.location=/tmp/truststore.p12
3 

ssl.truststore.password=$STOREPASS
ssl.truststore.type=PKCS12
sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.token.endpoint.uri="<token_endpoint_url>" \
4 

  oauth.client.id="<client_id>" \
5 

  oauth.client.secret="<client_secret>" \
6 

  oauth.ssl.truststore.location="/tmp/oauth-truststore.p12" \
7 

  oauth.ssl.truststore.password="$STOREPASS" \
8 

  oauth.ssl.truststore.type="PKCS12" \
9 

  oauth.scope="<scope>" \
10 

  oauth.audience="<audience>" ;
11 

sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
Copy to Clipboard Toggle word wrap

1
SASL_SSL security protocol for TLS-encrypted connections. Use SASL_PLAINTEXT over unencrypted connections for local development only.
2
The SASL mechanism specified as OAUTHBEARER or PLAIN.
3
The truststore configuration for secure access to the Kafka cluster.
4
URI of the authorization server token endpoint.
5
Client ID, which is the name used when creating the client in the authorization server.
6
Client secret created when creating the client in the authorization server.
7
The location contains the public key certificate (truststore.p12) for the authorization server.
8
The password for accessing the truststore.
9
The truststore type.
10
(Optional) The scope for requesting the token from the token endpoint. An authorization server may require a client to specify the scope.
11
(Optional) The audience for requesting the token from the token endpoint. An authorization server may require a client to specify the audience.

Example client credentials configuration using the client assertion

security.protocol=SASL_SSL
sasl.mechanism=OAUTHBEARER
ssl.truststore.location=/tmp/truststore.p12
ssl.truststore.password=$STOREPASS
ssl.truststore.type=PKCS12
sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.token.endpoint.uri="<token_endpoint_url>" \
  oauth.client.id="<client_id>" \
  oauth.client.assertion.location="<path_to_client_assertion_token_file>" \
1 

  oauth.client.assertion.type="urn:ietf:params:oauth:client-assertion-type:jwt-bearer" \
2 

  oauth.ssl.truststore.location="/tmp/oauth-truststore.p12" \
  oauth.ssl.truststore.password="$STOREPASS" \
  oauth.ssl.truststore.type="PKCS12" \
  oauth.scope="<scope>" \
  oauth.audience="<audience>" ;
sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
Copy to Clipboard Toggle word wrap

1
Path to the client assertion file used for authenticating the client. This file is a private key file as an alternative to the client secret. Alternatively, use the oauth.client.assertion option to specify the client assertion value in clear text.
2
(Optional) Sometimes you may need to specify the client assertion type. In not specified, the default value is urn:ietf:params:oauth:client-assertion-type:jwt-bearer.

Example password grants configuration

security.protocol=SASL_SSL
sasl.mechanism=OAUTHBEARER
ssl.truststore.location=/tmp/truststore.p12
ssl.truststore.password=$STOREPASS
ssl.truststore.type=PKCS12
sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.token.endpoint.uri="<token_endpoint_url>" \
  oauth.client.id="<client_id>" \
1 

  oauth.client.secret="<client_secret>" \
2 

  oauth.password.grant.username="<username>" \
3 

  oauth.password.grant.password="<password>" \
4 

  oauth.ssl.truststore.location="/tmp/oauth-truststore.p12" \
  oauth.ssl.truststore.password="$STOREPASS" \
  oauth.ssl.truststore.type="PKCS12" \
  oauth.scope="<scope>" \
  oauth.audience="<audience>" ;
sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
Copy to Clipboard Toggle word wrap

1
Client ID, which is the name used when creating the client in the authorization server.
2
(Optional) Client secret created when creating the client in the authorization server.
3
Username for password grant authentication. OAuth password grant configuration (username and password) uses the OAuth 2.0 password grant method. To use password grants, create a user account for a client on your authorization server with limited permissions. The account should act like a service account. Use in environments where user accounts are required for authentication, but consider using a refresh token first.
4
Password for password grant authentication.
Note

SASL PLAIN does not support passing a username and password (password grants) using the OAuth 2.0 password grant method.

Example access token configuration

security.protocol=SASL_SSL
sasl.mechanism=OAUTHBEARER
ssl.truststore.location=/tmp/truststore.p12
ssl.truststore.password=$STOREPASS
ssl.truststore.type=PKCS12
sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.access.token="<access_token>" ;
1 

sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
Copy to Clipboard Toggle word wrap

1
Long-lived access token for Kafka clients. Alternatively, oauth.access.token.location can be used to specify the file that contains the access token.

Example OpenShift service account token configuration

security.protocol=SASL_SSL
sasl.mechanism=OAUTHBEARER
ssl.truststore.location=/tmp/truststore.p12
ssl.truststore.password=$STOREPASS
ssl.truststore.type=PKCS12
sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.access.token.location="/var/run/secrets/kubernetes.io/serviceaccount/token";
1 

sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
Copy to Clipboard Toggle word wrap

1
Location to the service account token on the filesystem (assuming that the client is deployed as an OpenShift pod)

Example refresh token configuration

security.protocol=SASL_SSL
sasl.mechanism=OAUTHBEARER
ssl.truststore.location=/tmp/truststore.p12
ssl.truststore.password=$STOREPASS
ssl.truststore.type=PKCS12
sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  oauth.token.endpoint.uri="<token_endpoint_url>" \
  oauth.client.id="<client_id>" \
1 

  oauth.client.secret="<client_secret>" \
2 

  oauth.refresh.token="<refresh_token>" \
3 

  oauth.ssl.truststore.location="/tmp/oauth-truststore.p12" \
  oauth.ssl.truststore.password="$STOREPASS" \
  oauth.ssl.truststore.type="PKCS12" ;
sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
Copy to Clipboard Toggle word wrap

1
Client ID, which is the name used when creating the client in the authorization server.
2
(Optional) Client secret created when creating the client in the authorization server.
3
Long-lived refresh token for Kafka clients.

SASL extensions for custom OAUTHBEARER implementations

If your Kafka broker uses a custom OAUTHBEARER implementation, you may need to pass additional SASL extension options. These extensions can include attributes or information required as client context by the authorization server. The options are passed as key-value pairs and are sent to the Kafka broker when a new session is started.

Pass SASL extension values using oauth.sasl.extension. as a key prefix.

Example configuration to pass SASL extension values

oauth.sasl.extension.key1="value1"
oauth.sasl.extension.key2="value2"
Copy to Clipboard Toggle word wrap

7.2.3. OAuth 2.0 client authentication flows
링크 복사

OAuth 2.0 authentication flows depend on the underlying Kafka client and Kafka broker configuration. The flows must also be supported by the authorization server used.

The Kafka broker listener configuration determines how clients authenticate using an access token. The client can pass a client ID and secret to request an access token.

If a listener is configured to use PLAIN authentication, the client can authenticate with a client ID and secret or username and access token. These values are passed as the username and password properties of the PLAIN mechanism.

Listener configuration supports the following token validation options:

  • You can use fast local token validation based on JWT signature checking and local token introspection, without contacting an authorization server. The authorization server provides a JWKS endpoint with public certificates that are used to validate signatures on the tokens.
  • You can use a call to a token introspection endpoint provided by an authorization server. Each time a new Kafka broker connection is established, the broker passes the access token received from the client to the authorization server. The Kafka broker checks the response to confirm whether the token is valid.
Note

An authorization server might only allow the use of opaque access tokens, which means that local token validation is not possible.

Kafka client credentials can also be configured for the following types of authentication:

  • Direct local access using a previously generated long-lived access token
  • Contact with the authorization server for a new access token to be issued (using a client ID and credentials, or a refresh token, or a username and a password)
7.2.3.1. Example client authentication flows using the SASL OAUTHBEARER mechanism
링크 복사

You can use the following communication flows for Kafka authentication using the SASL OAUTHBEARER mechanism.

Client using client ID and credentials, with broker delegating validation to authorization server

Client using client ID and secret with broker delegating validation to authorization server

  1. The Kafka client requests an access token from the authorization server using a client ID and credentials, and optionally a refresh token. Alternatively, the client may authenticate using a username and a password.
  2. The authorization server generates a new access token.
  3. The Kafka client authenticates with the Kafka broker using the SASL OAUTHBEARER mechanism to pass the access token.
  4. The Kafka broker validates the access token by calling a token introspection endpoint on the authorization server using its own client ID and secret.
  5. A Kafka client session is established if the token is valid.

Client using client ID and credentials, with broker performing fast local token validation

Client using client ID and credentials with broker performing fast local token validation

  1. The Kafka client authenticates with the authorization server from the token endpoint, using a client ID and credentials, and optionally a refresh token. Alternatively, the client may authenticate using a username and a password.
  2. The authorization server generates a new access token.
  3. The Kafka client authenticates with the Kafka broker using the SASL OAUTHBEARER mechanism to pass the access token.
  4. The Kafka broker validates the access token locally using a JWT token signature check, and local token introspection.

Client using long-lived access token, with broker delegating validation to authorization server

Client using long-lived access token with broker delegating validation to authorization server

  1. The Kafka client authenticates with the Kafka broker using the SASL OAUTHBEARER mechanism to pass the long-lived access token.
  2. The Kafka broker validates the access token by calling a token introspection endpoint on the authorization server, using its own client ID and secret.
  3. A Kafka client session is established if the token is valid.

Client using long-lived access token, with broker performing fast local validation

Client using long-lived access token with broker performing fast local validation

  1. The Kafka client authenticates with the Kafka broker using the SASL OAUTHBEARER mechanism to pass the long-lived access token.
  2. The Kafka broker validates the access token locally using a JWT token signature check and local token introspection.
Warning

Fast local JWT token signature validation is suitable only for short-lived tokens as there is no check with the authorization server if a token has been revoked. Token expiration is written into the token, but revocation can happen at any time, so cannot be accounted for without contacting the authorization server. Any issued token would be considered valid until it expires.

7.2.3.2. Example client authentication flows using the SASL PLAIN mechanism
링크 복사

You can use the following communication flows for Kafka authentication using the OAuth PLAIN mechanism.

Client using a client ID and secret, with the broker obtaining the access token for the client

Client using a client ID and secret with the broker obtaining the access token for the client

  1. The Kafka client passes a clientId as a username and a secret as a password.
  2. The Kafka broker uses a token endpoint to pass the clientId and secret to the authorization server.
  3. The authorization server returns a fresh access token or an error if the client credentials are not valid.

  4. The Kafka broker validates the token in one of the following ways:

    1. If a token introspection endpoint is specified, the Kafka broker validates the access token by calling the endpoint on the authorization server. A session is established if the token validation is successful.
    2. If local token introspection is used, a request is not made to the authorization server. The Kafka broker validates the access token locally using a JWT token signature check.

Client using a long-lived access token without a client ID and secret

Client using a long-lived access token without a client ID and secret

  1. The Kafka client passes a username and password. The password provides the value of an access token that was obtained manually and configured before running the client.

  2. The password is passed with or without an $accessToken: string prefix depending on whether or not the Kafka broker listener is configured with a token endpoint for authentication.

    1. If the token endpoint is configured, the password should be prefixed by $accessToken: to let the broker know that the password parameter contains an access token rather than a client secret. The Kafka broker interprets the username as the account username.
    2. If the token endpoint is not configured on the Kafka broker listener (enforcing a no-client-credentials mode), the password should provide the access token without the prefix. The Kafka broker interprets the username as the account username. In this mode, the client doesn’t use a client ID and secret, and the password parameter is always interpreted as a raw access token.

  3. The Kafka broker validates the token in one of the following ways:

    1. If a token introspection endpoint is specified, the Kafka broker validates the access token by calling the endpoint on the authorization server. A session is established if token validation is successful.
    2. If local token introspection is used, there is no request made to the authorization server. Kafka broker validates the access token locally using a JWT token signature check.

7.2.4. Re-authenticating sessions
링크 복사

You can configure OAuth listeners to use Kafka session re-authentication for OAuth 2.0 sessions between Kafka clients and Kafka brokers. This mechanism enforces the expiry of an authenticated session between the client and the broker after a defined period of time. When a session expires, the client immediately starts a new session by reusing the existing connection rather than dropping it.

Session re-authentication is disabled by default. To enable it, set a time value for the connections.max.reauth.ms property in the server.properties file. For an example configuration, see Section 7.2.1, “Configuring OAuth 2.0 authentication on listeners”.

Session re-authentication must be supported by the Kafka client libraries used by the client.

Session re-authentication can be used with fast local JWT or introspection endpoint token validation.

Client re-authentication

When the broker’s authenticated session expires, the client must re-authenticate to the existing session by sending a new, valid access token to the broker, without dropping the connection.

If token validation is successful, a new client session is started using the existing connection. If the client fails to re-authenticate, the broker will close the connection if further attempts are made to send or receive messages. Java clients that use Kafka client library 2.2 or later automatically re-authenticate if the re-authentication mechanism is enabled on the broker.

Session re-authentication also applies to refresh tokens, if used. When the session expires, the client refreshes the access token by using its refresh token. The client then uses the new access token to re-authenticate over the existing connection.

Session expiry for OAUTHBEARER and PLAIN

When session re-authentication is configured, session expiry works differently for OAUTHBEARER and PLAIN authentication.

For OAUTHBEARER and PLAIN, using the client ID and secret method:

  • The broker’s authenticated session will expire at the configured connections.max.reauth.ms.
  • The session will expire earlier if the access token expires before the configured time.

For PLAIN using the long-lived access token method:

  • The broker’s authenticated session will expire at the configured connections.max.reauth.ms.
  • Re-authentication will fail if the access token expires before the configured time. Although session re-authentication is attempted, PLAIN has no mechanism for refreshing tokens.

If connections.max.reauth.ms is not configured, OAUTHBEARER and PLAIN clients can remain connected to brokers indefinitely, without needing to re-authenticate. Authenticated sessions do not end with access token expiry.

However, this can be considered when configuring authorization, for example, by using keycloak authorization or installing a custom authorizer.

7.2.5. Example: Enabling OAuth 2.0 authentication
링크 복사

This example shows how to configure client access to a Kafka cluster using OAUth 2.0 authentication. The procedures describe the configuration required to set up OAuth 2.0 authentication on Kafka listeners and Kafka Java clients.

7.2.5.1. Configuring OAuth 2.0 support for Kafka brokers
링크 복사

This procedure describes how to configure Kafka brokers so that the broker listeners are enabled to use OAuth 2.0 authentication using an authorization server.

We advise use of OAuth 2.0 over an encrypted interface through configuration of TLS listeners. Plain listeners are not recommended.

Configure the Kafka brokers using properties that support your chosen authorization server, and the type of authorization you are implementing.

Prerequisites

  • Streams for Apache Kafka is installed on each host, and the configuration files are available.
  • An OAuth 2.0 authorization server is deployed.

Procedure

  1. Configure the Kafka broker listener configuration in the server.properties file.

    For example, using the OAUTHBEARER mechanism: 

    sasl.enabled.mechanisms=OAUTHBEARER
listeners=CLIENT://0.0.0.0:9092
listener.security.protocol.map=CLIENT:SASL_PLAINTEXT
listener.name.client.sasl.enabled.mechanisms=OAUTHBEARER
sasl.mechanism.inter.broker.protocol=OAUTHBEARER
inter.broker.listener.name=CLIENT
listener.name.client.oauthbearer.sasl.server.callback.handler.class=io.strimzi.kafka.oauth.server.JaasServerOauthValidatorCallbackHandler
listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required ;
listener.name.client.oauthbearer.sasl.login.callback.handler.class=io.strimzi.kafka.oauth.client.JaasClientOauthLoginCallbackHandler
    Copy to Clipboard Toggle word wrap

  2. Configure broker connection settings as part of the listener.name.client.oauthbearer.sasl.jaas.config.

  3. If required, configure access to the authorization server.

    This step is normally required for a production environment, unless a technology like service mesh is used to configure secure channels outside containers.

    1. Provide a custom truststore for connecting to a secured authorization server. SSL is always required for access to the authorization server.

      Set properties to configure the truststore.

      For example: 

      listener.name.client.oauthbearer.sasl.jaas.config=org.apache.kafka.common.security.oauthbearer.OAuthBearerLoginModule required \
  # ...
  oauth.client.id="kafka-broker" \
  oauth.client.secret="kafka-broker-secret" \
  oauth.ssl.truststore.location="<path_to_truststore_p12_file>" \
  oauth.ssl.truststore.password="<truststore_password>" \
  oauth.ssl.truststore.type="PKCS12" ;
      Copy to Clipboard Toggle word wrap

    2. If the certificate hostname does not match the access URL hostname, you can turn off certificate hostname validation: 

      oauth.ssl.endpoint.identification.algorithm=""
      Copy to Clipboard Toggle word wrap

      The check ensures that client connection to the authorization server is authentic. You may wish to turn off the validation in a non-production environment.

What to do next

7.2.5.2. Setting up OAuth 2.0 on Kafka Java clients
링크 복사

Configure Kafka producer and consumer APIs to use OAuth 2.0 for interaction with Kafka brokers. Add a callback plugin to your client pom.xml file, then configure your client for OAuth 2.0.

How you configure the authentication properties depends on the authentication method you are using to access the OAuth 2.0 authorization server. In this procedure, the properties are specified in a properties file, then loaded into the client configuration.

Prerequisites

  • Streams for Apache Kafka and Kafka are running
  • An OAuth 2.0 authorization server is deployed and configured for OAuth access to Kafka brokers
  • Kafka brokers are configured for OAuth 2.0

Procedure

  1. Add the client library with OAuth 2.0 support to the pom.xml file for the Kafka client: 

    <dependency>
 <groupId>io.strimzi</groupId>
 <artifactId>kafka-oauth-client</artifactId>
 <version>0.15.1.redhat-00005</version>
</dependency>
    Copy to Clipboard Toggle word wrap

  2. Configure the client depending on the OAuth 2.0 authentication method:

    For example, specify the properties for the authentication method in a client.properties file.

  3. Input the client properties for OAUTH 2.0 authentication into the Java client code.

    Example showing input of client properties

    Properties props = new Properties();
try (FileReader reader = new FileReader("client.properties", StandardCharsets.UTF_8)) {
  props.load(reader);
}
    Copy to Clipboard Toggle word wrap

  4. Verify that the Kafka client can access the Kafka brokers.

7.3. Using OAuth 2.0 token-based authorization
링크 복사

Streams for Apache Kafka supports the use of OAuth 2.0 token-based authorization through Red Hat build of Keycloak Authorization Services, which lets you manage security policies and permissions centrally.

Security policies and permissions defined in Red Hat build of Keycloak grant access to Kafka resources. Users and clients are matched against policies that permit access to perform specific actions on Kafka brokers.

Kafka allows all users full access to brokers by default, but also provides the AclAuthorizer and StandardAuthorizer plugins to configure authorization based on Access Control Lists (ACLs). The ACL rules managed by these plugins are used to grant or deny access to resources based on username, and these rules are stored within the Kafka cluster itself.

However, OAuth 2.0 token-based authorization with Red Hat build of Keycloak offers far greater flexibility on how you wish to implement access control to Kafka brokers. In addition, you can configure your Kafka brokers to use OAuth 2.0 authorization and ACLs.

7.3.1. Example: Enabling OAuth 2.0 authorization
링크 복사

This procedure describes how to configure Kafka brokers to use OAuth 2.0 authorization using Red Hat build of Keycloak Authorization Services.

Red Hat build of Keycloak server Authorization Services REST endpoints extend token-based authentication with Red Hat build of Keycloak by applying defined security policies on a particular user, and providing a list of permissions granted on different resources for that user. Policies use roles and groups to match permissions to users. OAuth 2.0 authorization enforces permissions locally based on the received list of grants for the user from Red Hat build of Keycloak Authorization Services.

A Red Hat build of Keycloak authorizer (KeycloakAuthorizer) is provided with Streams for Apache Kafka. The authorizer fetches a list of granted permissions from the authorization server as needed, and enforces authorization locally on Kafka, making rapid authorization decisions for each client request.

Before you begin

Consider the access you require or want to limit for certain users. You can use a combination of Red Hat build of Keycloak groups, roles, clients, and users to configure access in Red Hat build of Keycloak.

Typically, groups are used to match users based on organizational departments or geographical locations. And roles are used to match users based on their function.

With Red Hat build of Keycloak, you can store users and groups in LDAP, whereas clients and roles cannot be stored this way. Storage and access to user data may be a factor in how you choose to configure authorization policies.

Note

Super users always have unconstrained access to a Kafka broker regardless of the authorization implemented on the Kafka broker.

Prerequisites

  • Streams for Apache Kafka must be configured to use OAuth 2.0 with Red Hat build of Keycloak token-based authentication. You use the same RRed Hat build of Keycloak endpoint when you set up authorization.
  • You need to understand how to manage policies and permissions for Red Hat build of Keycloak Authorization Services, as described in the Red Hat build of Keycloak documentation.

Procedure

  1. Access the Red Hat build of Keycloak Admin Console or use the Red Hat build of Keycloak Admin CLI to enable Authorization Services for the OAuth 2.0 client for Kafka you created when setting up OAuth 2.0 authentication.
  2. Use Authorization Services to define resources, authorization scopes, policies, and permissions for the client.
  3. Bind the permissions to users and clients by assigning them roles and groups.

  4. Configure the Kafka brokers to use Red Hat build of Keycloak authorization.

    Add the following to the Kafka server.properties configuration file to install the authorizer in Kafka: 

    authorizer.class.name=io.strimzi.kafka.oauth.server.authorizer.KeycloakAuthorizer
principal.builder.class=io.strimzi.kafka.oauth.server.OAuthKafkaPrincipalBuilder
    Copy to Clipboard Toggle word wrap

  5. Add configuration for the Kafka brokers to access the authorization server and Authorization Services.

    Here we show example configuration added as additional properties to server.properties, but you can also define them as environment variables using capitalized or upper-case naming conventions. 

    strimzi.authorization.token.endpoint.uri="https://<auth_server_address>/auth/realms/REALM-NAME/protocol/openid-connect/token"
    1 
    
strimzi.authorization.client.id="kafka"
    2
    Copy to Clipboard Toggle word wrap
    1
    The OAuth 2.0 token endpoint URL to Red Hat build of Keycloak. For production, always use https:// urls.
    2
    The client ID of the OAuth 2.0 client definition in Red Hat build of Keycloak that has Authorization Services enabled. Typically, kafka is used as the ID.

  6. (Optional) Add configuration for specific Kafka clusters.

    For example: 

    strimzi.authorization.kafka.cluster.name="kafka-cluster"
    1
    Copy to Clipboard Toggle word wrap
    1
    The name of a specific Kafka cluster. Names are used to target permissions, making it possible to manage multiple clusters within the same Red Hat build of Keycloak realm. The default value is kafka-cluster.

  7. (Optional) Delegate to simple authorization: 

    strimzi.authorization.delegate.to.kafka.acl="true"
    1
    Copy to Clipboard Toggle word wrap
    1
    Delegate authorization to Kafka AclAuthorizer if access is denied by Red Hat build of Keycloak Authorization Services policies. The default is false.

  8. (Optional) Add configuration for TLS connection to the authorization server.

    For example: 

    strimzi.authorization.ssl.truststore.location=<path_to_truststore>
    1 
    
strimzi.authorization.ssl.truststore.password=<my_truststore_password>
    2 
    
strimzi.authorization.ssl.truststore.type=JKS
    3 
    
strimzi.authorization.ssl.secure.random.implementation=SHA1PRNG
    4 
    
strimzi.authorization.ssl.endpoint.identification.algorithm=HTTPS
    5
    Copy to Clipboard Toggle word wrap
    1
    The path to the truststore that contain the certificates.
    2
    The password for the truststore.
    3
    The truststore type. If not set, the default Java keystore type is used.
    4
    Random number generator implementation. If not set, the Java platform SDK default is used.
    5
    Hostname verification. If set to an empty string, the hostname verification is turned off. If not set, the default value is HTTPS, which enforces hostname verification for server certificates.

  9. (Optional) Configure the refresh of grants from the authorization server. The grants refresh job works by enumerating the active tokens and requesting the latest grants for each.

    For example: 

    strimzi.authorization.grants.refresh.period.seconds="120"
    1 
    
strimzi.authorization.grants.refresh.pool.size="10"
    2 
    
strimzi.authorization.grants.max.idle.time.seconds="300"
    3 
    
strimzi.authorization.grants.gc.period.seconds="300"
    4 
    
strimzi.authorization.reuse.grants="false"
    5
    Copy to Clipboard Toggle word wrap
    1
    Specifies how often the list of grants from the authorization server is refreshed (once per minute by default). To turn grants refresh off for debugging purposes, set to "0".
    2
    Specifies the size of the thread pool (the degree of parallelism) used by the grants refresh job. The default value is "5".
    3
    The time, in seconds, after which an idle grant in the cache can be evicted. The default value is 300.
    4
    The time, in seconds, between consecutive runs of a job that cleans stale grants from the cache. The default value is 300.
    5
    Controls whether the latest grants are fetched for a new session. When disabled, grants are retrieved from Red Hat build of Keycloak and cached for the user. The default value is true.

  10. (Optional) Configure network timeouts when communicating with the authorization server.

    For example: 

    strimzi.authorization.connect.timeout.seconds="60"
    1 
    
strimzi.authorization.read.timeout.seconds="60"
    2 
    
strimzi.authorization.http.retries="2"
    3
    Copy to Clipboard Toggle word wrap
    1
    The connect timeout in seconds when connecting to the Red Hat build of Keycloak token endpoint. The default value is 60.
    2
    The read timeout in seconds when connecting to the Red Hat build of Keycloak token endpoint. The default value is 60.
    3
    The maximum number of times to retry (without pausing) a failed HTTP request to the authorization server. The default value is 0, meaning that no retries are performed. To use this option effectively, consider reducing the timeout times for the strimzi.authorization.connect.timeout.seconds and strimzi.authorization.read.timeout.seconds options. However, note that retries may prevent the current worker thread from being available to other requests, and if too many requests stall, it could make Kafka unresponsive.

  11. (Optional) Enable OAuth 2.0 metrics for token validation and authorization: 

    oauth.enable.metrics="true"
    1
    Copy to Clipboard Toggle word wrap
    1
    Controls whether to enable or disable OAuth metrics. The default value is false.

  12. (Optional) Remove the Accept header from requests: 

    oauth.include.accept.header="false"
    1
    Copy to Clipboard Toggle word wrap
    1
    Set to false if including the header is causing issues when communicating with the authorization server. The default value is true.
  13. Verify the configured permissions by accessing Kafka brokers as clients or users with specific roles, ensuring they have the necessary access and do not have unauthorized access.

Chapter 8. Using OPA policy-based authorization
링크 복사

Open Policy Agent (OPA) is an open-source policy engine. You can integrate OPA with Streams for Apache Kafka to act as a policy-based authorization mechanism for permitting client operations on Kafka brokers.

When a request is made from a client, OPA will evaluate the request against policies defined for Kafka access, then allow or deny the request.

Note

Red Hat does not support the OPA server.

8.1. Defining OPA policies
링크 복사

Before integrating OPA with Streams for Apache Kafka, consider how you will define policies to provide fine-grained access controls.

You can define access control for Kafka clusters, consumer groups and topics. For instance, you can define an authorization policy that allows write access from a producer client to a specific broker topic.

For this, the policy might specify the:

  • User principal and host address associated with the producer client
  • Operations allowed for the client
  • Resource type (topic) and resource name the policy applies to

Allow and deny decisions are written into the policy, and a response is provided based on the request and client identification data provided.

In our example the producer client would have to satisfy the policy to be allowed to write to the topic.

8.2. Connecting to the OPA
링크 복사

To enable Kafka to access the OPA policy engine to query access control policies, , you configure a custom OPA authorizer plugin (kafka-authorizer-opa-VERSION.jar) in your Kafka server.properties file.

When a request is made by a client, the OPA policy engine is queried by the plugin using a specified URL address and a REST endpoint, which must be the name of the defined policy.

The plugin provides the details of the client request — user principal, operation, and resource — in JSON format to be checked against the policy. The details will include the unique identity of the client; for example, taking the distinguished name from the client certificate if TLS authentication is used.

OPA uses the data to provide a response — either true or false — to the plugin to allow or deny the request.

8.3. Configuring OPA authorization support
링크 복사

This procedure describes how to configure Kafka brokers to use OPA authorization.

Before you begin

Consider the access you require or want to limit for certain users. You can use a combination of users and Kafka resources to define OPA policies.

It is possible to set up OPA to load user information from an LDAP data source.

Note

Super users always have unconstrained access to a Kafka broker regardless of the authorization implemented on the Kafka broker.

Prerequisites

Procedure

  1. Write the OPA policies required for authorizing client requests to perform operations on the Kafka brokers.

    See Defining OPA policies.

    Now configure the Kafka brokers to use OPA.

  2. Install the OPA authorizer plugin for Kafka.

    See Connecting to the OPA.

    Make sure that the plugin files are included in the Kafka classpath.

  3. Add the following to the Kafka server.properties configuration file to enable the OPA plugin: 

    authorizer.class.name: com.bisnode.kafka.authorization.OpaAuthorizer
    Copy to Clipboard Toggle word wrap

  4. Add further configuration to server.properties for the Kafka brokers to access the OPA policy engine and policies.

    For example: 

    opa.authorizer.url=https://OPA-ADDRESS/allow
    1 
    
opa.authorizer.allow.on.error=false
    2 
    
opa.authorizer.cache.initial.capacity=50000
    3 
    
opa.authorizer.cache.maximum.size=50000
    4 
    
opa.authorizer.cache.expire.after.seconds=600000
    5 
    
super.users=User:alice;User:bob
    6
    Copy to Clipboard Toggle word wrap
    1
    (Required) The OAuth 2.0 token endpoint URL for the policy the authorizer plugin will query. In this example, the policy is called allow.
    2
    Flag to specify whether a client is allowed or denied access by default if the authorizer plugin fails to connect with the OPA policy engine.
    3
    Initial capacity in bytes of the local cache. The cache is used so that the plugin does not have to query the OPA policy engine for every request.
    4
    Maximum capacity in bytes of the local cache.
    5
    Time in milliseconds that the local cache is refreshed by reloading from the OPA policy engine.
    6
    A list of user principals treated as super users, so that they are always allowed without querying the Open Policy Agent policy.

    Refer to the Open Policy Agent website for information on authentication and authorization options.

  5. Verify the configured permissions by accessing Kafka brokers using clients that have and do not have the correct authorization.

Chapter 9. Creating and managing topics
링크 복사

Messages in Kafka are always sent to or received from a topic. This chapter describes how to create and manage Kafka topics.

9.1. Partitions and replicas
링크 복사

A topic is always split into one or more partitions. Partitions act as shards. That means that every message sent by a producer is always written only into a single partition.

Each partition can have one or more replicas, which will be stored on different brokers in the cluster. When creating a topic you can configure the number of replicas using the replication factor. Replication factor defines the number of copies which will be held within the cluster. One of the replicas for a given partition will be elected as a leader. The leader replica will be used by the producers to send new messages and by the consumers to consume messages. The other replicas will be follower replicas. The followers replicate the leader.

If the leader fails, one of the in-sync followers will automatically become the new leader. Each server acts as a leader for some of its partitions and a follower for others so the load is well balanced within the cluster.

Note

The replication factor determines the number of replicas including the leader and the followers. For example, if you set the replication factor to 3, then there will be one leader and two follower replicas.

9.2. Message retention
링크 복사

The message retention policy defines how long the messages will be stored on the Kafka brokers. It can be defined based on time, partition size or both.

For example, you can define that the messages should be kept:

  • For 7 days
  • Until the partition has 1GB of messages. Once the limit is reached, the oldest messages will be removed.
  • For 7 days or until the 1GB limit has been reached. Whatever limit comes first will be used.
Warning

Kafka brokers store messages in log segments. The messages which are past their retention policy will be deleted only when a new log segment is created. New log segments are created when the previous log segment exceeds the configured log segment size. Additionally, users can request new segments to be created periodically.

Kafka brokers support a compacting policy.

For a topic with the compacted policy, the broker will always keep only the last message for each key. The older messages with the same key will be removed from the partition. Because compacting is a periodically executed action, it does not happen immediately when the new message with the same key is sent to the partition. Instead it might take some time until the older messages are removed.

For more information about the message retention configuration options, see Section 9.5, “Topic configuration”.

9.3. Topic auto-creation
링크 복사

By default, Kafka automatically creates a topic if a producer or consumer attempts to send or receive messages from a non-existent topic. This behavior is governed by the auto.create.topics.enable configuration property, which is set to true by default.

For production environments, it is recommended to disable automatic topic creation. To do so, set auto.create.topics.enable to false in the Kafka configuration properties file:

Disabling automatic topic creation

auto.create.topics.enable=false
Copy to Clipboard Toggle word wrap

9.4. Topic deletion
링크 복사

Kafka provides the option to prevent topic deletion, controlled by the delete.topic.enable property. By default, this property is set to true, allowing topics to be deleted.

However, setting it to false in the Kafka configuration properties file will disable topic deletion. In this case, attempts to delete a topic will return a success status, but the topic itself will not be deleted.

Disabling topic deletion

delete.topic.enable=false
Copy to Clipboard Toggle word wrap

9.5. Topic configuration
링크 복사

Auto-created topics will use the default topic configuration which can be specified in the broker properties file. However, when creating topics manually, their configuration can be specified at creation time. It is also possible to change a topic’s configuration after it has been created. The main topic configuration options for manually created topics are:

cleanup.policy
Configures the retention policy to delete or compact. The delete policy will delete old records. The compact policy will enable log compaction. The default value is delete. For more information about log compaction, see Kafka website.
compression.type
Specifies the compression which is used for stored messages. Valid values are gzip, snappy, lz4, uncompressed (no compression) and producer (retain the compression codec used by the producer). The default value is producer.
max.message.bytes
The maximum size of a batch of messages allowed by the Kafka broker, in bytes. The default value is 1000012.
min.insync.replicas
The minimum number of replicas which must be in sync for a write to be considered successful. The default value is 1.
retention.ms
Maximum number of milliseconds for which log segments will be retained. Log segments older than this value will be deleted. The default value is 604800000 (7 days).
retention.bytes
The maximum number of bytes a partition will retain. Once the partition size grows over this limit, the oldest log segments will be deleted. Value of -1 indicates no limit. The default value is -1.
segment.bytes
The maximum file size of a single commit log segment file in bytes. When the segment reaches its size, a new segment will be started. The default value is 1073741824 bytes (1 gibibyte).

The defaults for auto-created topics can be specified in the Kafka broker configuration using similar options:

log.cleanup.policy
See cleanup.policy above.
compression.type
See compression.type above.
message.max.bytes
See max.message.bytes above.
min.insync.replicas
See min.insync.replicas above.
log.retention.ms
See retention.ms above.
log.retention.bytes
See retention.bytes above.
log.segment.bytes
See segment.bytes above.
default.replication.factor
Default replication factor for automatically created topics. Default value is 1.
num.partitions
Default number of partitions for automatically created topics. Default value is 1.

9.6. Internal topics
링크 복사

Internal topics are created and used internally by the Kafka brokers and clients. Kafka has several internal topics, two of which are used to store consumer offsets (__consumer_offsets) and transaction state (__transaction_state).

__consumer_offsets and __transaction_state topics can be configured using dedicated Kafka broker configuration options starting with prefix offsets.topic. and transaction.state.log..

The most important configuration options are:

offsets.topic.replication.factor
Number of replicas for __consumer_offsets topic. The default value is 3.
offsets.topic.num.partitions
Number of partitions for __consumer_offsets topic. The default value is 50.
transaction.state.log.replication.factor
Number of replicas for __transaction_state topic. The default value is 3.
transaction.state.log.num.partitions
Number of partitions for __transaction_state topic. The default value is 50.
transaction.state.log.min.isr
Minimum number of replicas that must acknowledge a write to __transaction_state topic to be considered successful. If this minimum cannot be met, then the producer will fail with an exception. The default value is 2.

9.7. Creating a topic
링크 복사

Use the kafka-topics.sh tool to manage topics. kafka-topics.sh is part of the Streams for Apache Kafka distribution and is found in the bin directory.

Prerequisites

Creating a topic

  1. Create a topic using the kafka-topics.sh utility and specify the following:

    • Host and port of the Kafka broker in the --bootstrap-server option.
    • The new topic to be created in the --create option.
    • Topic name in the --topic option.
    • The number of partitions in the --partitions option.

    • Topic replication factor in the --replication-factor option.

      You can also override some of the default topic configuration options using the option --config. This option can be used multiple times to override different options. 

      ./bin/kafka-topics.sh --bootstrap-server <broker_address> --create --topic <topic_name> --partitions <number_of_partitions> --replication-factor <replication_factor> --config <option_1>=<value_1> --config <option_2>=<value_2>
      Copy to Clipboard Toggle word wrap

      Example of the command to create a topic named mytopic

      [source,shell,subs=+quotes]
./bin/kafka-topics.sh --bootstrap-server localhost:9092 --create --topic mytopic --partitions 50 --replication-factor 3 --config cleanup.policy=compact --config min.insync.replicas=2
      Copy to Clipboard Toggle word wrap

  2. Verify that the topic exists using kafka-topics.sh. 

    ./bin/kafka-topics.sh --bootstrap-server <broker_address> --describe --topic <topic_name>
    Copy to Clipboard Toggle word wrap

    Example of the command to describe a topic named mytopic

    ./bin/kafka-topics.sh --bootstrap-server localhost:9092 --describe --topic mytopic
    Copy to Clipboard Toggle word wrap

9.8. Listing and describing topics
링크 복사

The kafka-topics.sh tool can be used to list and describe topics. kafka-topics.sh is part of the Streams for Apache Kafka distribution and can be found in the bin directory.

Prerequisites

Describing a topic

  1. Describe a topic using the kafka-topics.sh utility and specify the following:

    • Host and port of the Kafka broker in the --bootstrap-server option.
    • Use the --describe option to specify that you want to describe a topic.
    • Topic name must be specified in the --topic option.

    • When the --topic option is omitted, it describes all available topics. 

      ./bin/kafka-topics.sh --bootstrap-server <broker_host>:<port> --describe --topic <topic_name>
      Copy to Clipboard Toggle word wrap

      Example of the command to describe a topic named mytopic

      ./bin/kafka-topics.sh --bootstrap-server localhost:9092 --describe --topic mytopic
      Copy to Clipboard Toggle word wrap

      The command lists all partitions and replicas which belong to this topic. It also lists all topic configuration options.

9.9. Modifying a topic configuration
링크 복사

The kafka-configs.sh tool can be used to modify topic configurations. kafka-configs.sh is part of the Streams for Apache Kafka distribution and can be found in the bin directory.

Prerequisites

Modify topic configuration

  1. Use the kafka-configs.sh tool to get the current configuration.

    • Specify the host and port of the Kafka broker in the --bootstrap-server option.
    • Set the --entity-type as topic and --entity-name to the name of your topic.

    • Use --describe option to get the current configuration. 

      ./bin/kafka-configs.sh --bootstrap-server <broker_host>:<port> --entity-type topics --entity-name <topic_name> --describe
      Copy to Clipboard Toggle word wrap

      Example of the command to get configuration of a topic named mytopic

      ./bin/kafka-configs.sh --bootstrap-server localhost:9092 --entity-type topics --entity-name mytopic --describe
      Copy to Clipboard Toggle word wrap

  2. Use the kafka-configs.sh tool to change the configuration.

    • Specify the host and port of the Kafka broker in the --bootstrap-server option.
    • Set the --entity-type as topic and --entity-name to the name of your topic.
    • Use --alter option to modify the current configuration.

    • Specify the options you want to add or change in the option --add-config. 

      ./bin/kafka-configs.sh --bootstrap-server <broker_host>:<port> --entity-type topics --entity-name <topic_name> --alter --add-config <option>=<value>
      Copy to Clipboard Toggle word wrap

      Example of the command to change configuration of a topic named mytopic

      ./bin/kafka-configs.sh --bootstrap-server localhost:9092 --entity-type topics --entity-name mytopic --alter --add-config min.insync.replicas=1
      Copy to Clipboard Toggle word wrap

  3. Use the kafka-configs.sh tool to delete an existing configuration option.

    • Specify the host and port of the Kafka broker in the --bootstrap-server option.
    • Set the --entity-type as topic and --entity-name to the name of your topic.
    • Use --delete-config option to remove existing configuration option.

    • Specify the options you want to remove in the option --remove-config. 

      ./bin/kafka-configs.sh --bootstrap-server <broker_host>:<port> --entity-type topics --entity-name <topic_name> --alter --delete-config <option>
      Copy to Clipboard Toggle word wrap

      Example of the command to change configuration of a topic named mytopic

      ./bin/kafka-configs.sh --bootstrap-server localhost:9092 --entity-type topics --entity-name mytopic --alter --delete-config min.insync.replicas
      Copy to Clipboard Toggle word wrap

9.10. Deleting a topic
링크 복사

The kafka-topics.sh tool can be used to manage topics. kafka-topics.sh is part of the Streams for Apache Kafka distribution and can be found in the bin directory.

Prerequisites

Deleting a topic

  1. Delete a topic using the kafka-topics.sh utility.

    • Host and port of the Kafka broker in the --bootstrap-server option.
    • Use the --delete option to specify that an existing topic should be deleted.

    • Topic name must be specified in the --topic option. 

      ./bin/kafka-topics.sh --bootstrap-server <broker_host>:<port> --delete --topic <topic_name>
      Copy to Clipboard Toggle word wrap

      Example of the command to create a topic named mytopic

      ./bin/kafka-topics.sh --bootstrap-server localhost:9092 --delete --topic mytopic
      Copy to Clipboard Toggle word wrap

  2. Verify that the topic was deleted using kafka-topics.sh. 

    ./bin/kafka-topics.sh --bootstrap-server <broker_host>:<port> --list
    Copy to Clipboard Toggle word wrap

    Example of the command to list all topics

    ./bin/kafka-topics.sh --bootstrap-server localhost:9092 --list
    Copy to Clipboard Toggle word wrap

Chapter 10. Using Streams for Apache Kafka with Kafka Connect
링크 복사

Use Kafka Connect to stream data between Kafka and external systems. Kafka Connect provides a framework for moving large amounts of data while maintaining scalability and reliability. Kafka Connect is typically used to integrate Kafka with database, storage, and messaging systems that are external to your Kafka cluster.

Kafka Connect runs in standalone or distributed modes.

Standalone mode
In standalone mode, Kafka Connect runs on a single node. Standalone mode is intended for development and testing.
Distributed mode
In distributed mode, Kafka Connect runs across one or more worker nodes and the workloads are distributed among them. Distributed mode is intended for production.

Kafka Connect uses connector plugins that implement connectivity for different types of external systems. There are two types of connector plugins: sink and source. Sink connectors stream data from Kafka to external systems. Source connectors stream data from external systems into Kafka.

You can also use the Kafka Connect REST API to create, manage, and monitor connector instances.

Connector configuration specifies details such as the source or sink connectors and the Kafka topics to read from or write to. How you manage the configuration depends on whether you are running Kafka Connect in standalone or distributed mode.

  • In standalone mode, you can provide the connector configuration as JSON through the Kafka Connect REST API or you can use properties files to define the configuration.
  • In distributed mode, you can only provide the connector configuration as JSON through the Kafka Connect REST API.

Handling high volumes of messages

You can tune the configuration to handle high volumes of messages. For more information, see Handling high volumes of messages.

10.1. Using Kafka Connect in standalone mode
링크 복사

In Kafka Connect standalone mode, connectors run on the same node as the Kafka Connect worker process, which runs as a single process in a single JVM. This means that the worker process and connectors share the same resources, such as CPU, memory, and disk.

10.1.1. Configuring Kafka Connect in standalone mode
링크 복사

To configure Kafka Connect in standalone mode, edit the config/connect-standalone.properties configuration file. The following options are the most important.

bootstrap.servers
A list of Kafka broker addresses used as bootstrap connections to Kafka. For example, kafka0.my-domain.com:9092,kafka1.my-domain.com:9092,kafka2.my-domain.com:9092.
key.converter
The class used to convert message keys to and from Kafka format. For example, org.apache.kafka.connect.json.JsonConverter.
value.converter
The class used to convert message payloads to and from Kafka format. For example, org.apache.kafka.connect.json.JsonConverter.
offset.storage.file.filename
Specifies the file in which the offset data is stored.

Connector plugins open client connections to the Kafka brokers using the bootstrap address. To configure these connections, use the standard Kafka producer and consumer configuration options prefixed by producer. or consumer..

10.1.2. Running Kafka Connect in standalone mode
링크 복사

Configure and run Kafka Connect in standalone mode.

Prerequisites

  • Streams for Apache Kafka is installed on each host, and the configuration files are available.

  • You have specified connector configuration in properties files.

    You can also use the Kafka Connect REST API to manage connectors.

Procedure

  1. Edit the ./config/connect-standalone.properties Kafka Connect configuration file and set bootstrap.server to point to your Kafka brokers. For example: 

    bootstrap.servers=kafka0.my-domain.com:9092,kafka1.my-domain.com:9092,kafka2.my-domain.com:9092
    Copy to Clipboard Toggle word wrap

  2. Start Kafka Connect with the configuration file and specify one or more connector configurations. 

    ./bin/connect-standalone.sh ./config/connect-standalone.properties connector1.properties
[connector2.properties ...]
    Copy to Clipboard Toggle word wrap

  3. Verify that Kafka Connect is running. 

    jcmd | grep ConnectStandalone
    Copy to Clipboard Toggle word wrap

10.2. Using Kafka Connect in distributed mode
링크 복사

In distributed mode, Kafka Connect runs as a cluster of worker processes, with each worker running on a separate node. Connectors can run on any worker in the cluster, allowing for greater scalability and fault tolerance. The connectors are managed by the workers, which coordinate with each other to distribute the work and ensure that each connector is running on a single node at any given time.

10.2.1. Configuring Kafka Connect in distributed mode
링크 복사

To configure Kafka Connect in distributed mode, edit the config/connect-distributed.properties configuration file. The following options are the most important.

bootstrap.servers
A list of Kafka broker addresses used as bootstrap connections to Kafka. For example, kafka0.my-domain.com:9092,kafka1.my-domain.com:9092,kafka2.my-domain.com:9092.
key.converter
The class used to convert message keys to and from Kafka format. For example, org.apache.kafka.connect.json.JsonConverter.
value.converter
The class used to convert message payloads to and from Kafka format. For example, org.apache.kafka.connect.json.JsonConverter.
group.id
The name of the distributed Kafka Connect cluster. This must be unique and must not conflict with another consumer group ID. The default value is connect-cluster.
config.storage.topic
The Kafka topic used to store connector configurations. The default value is connect-configs.
offset.storage.topic
The Kafka topic used to store offsets. The default value is connect-offset.
status.storage.topic
The Kafka topic used for worker node statuses. The default value is connect-status.

Streams for Apache Kafka includes an example configuration file for Kafka Connect in distributed mode – see config/connect-distributed.properties in the Streams for Apache Kafka installation directory.

Connector plugins open client connections to the Kafka brokers using the bootstrap address. To configure these connections, use the standard Kafka producer and consumer configuration options prefixed by producer. or consumer..

10.2.2. Running Kafka Connect in distributed mode
링크 복사

Configure and run Kafka Connect in distributed mode.

Prerequisites

Running the cluster

  1. Edit the ./config/connect-distributed.properties Kafka Connect configuration file on all Kafka Connect worker nodes.

    • Set the bootstrap.server option to point to your Kafka brokers.
    • Set the group.id option.
    • Set the config.storage.topic option.
    • Set the offset.storage.topic option.

    • Set the status.storage.topic option.

      For example: 

      bootstrap.servers=kafka0.my-domain.com:9092,kafka1.my-domain.com:9092,kafka2.my-domain.com:9092
group.id=my-group-id
config.storage.topic=my-group-id-configs
offset.storage.topic=my-group-id-offsets
status.storage.topic=my-group-id-status
      Copy to Clipboard Toggle word wrap

  2. Start the Kafka Connect workers with the ./config/connect-distributed.properties configuration file on all Kafka Connect nodes. 

    ./bin/connect-distributed.sh ./config/connect-distributed.properties
    Copy to Clipboard Toggle word wrap

  3. Verify that Kafka Connect is running. 

    jcmd | grep ConnectDistributed
    Copy to Clipboard Toggle word wrap
  4. Use the Kafka Connect REST API to manage connectors.

10.3. Managing connectors
링크 복사

The Kafka Connect REST API provides endpoints for creating, updating, and deleting connectors directly. You can also use the API to check the status of connectors or change logging levels. When you create a connector through the API, you provide the configuration details for the connector as part of the API call.

You can also add and manage connectors as plugins. Plugins are packaged as JAR files that contain the classes to implement the connectors through the Kafka Connect API. You just need to specify the plugin in the classpath or add it to a plugin path for Kafka Connect to run the connector plugin on startup.

In addition to using the Kafka Connect REST API or plugins to manage connectors, you can also add connector configuration using properties files when running Kafka Connect in standalone mode. To do this, you simply specify the location of the properties file when starting the Kafka Connect worker process. The properties file should contain the configuration details for the connector, including the connector class, source and destination topics, and any required authentication or serialization settings.

10.3.1. Limiting access to the Kafka Connect API
링크 복사

The Kafka Connect REST API can be accessed by anyone who has authenticated access and knows the endpoint URL, which includes the hostname/IP address and port number. It is crucial to restrict access to the Kafka Connect API only to trusted users to prevent unauthorized actions and potential security issues.

For improved security, we recommend configuring the following properties for the Kafka Connect API:

  • (Kafka 3.4 or later) org.apache.kafka.disallowed.login.modules to specifically exclude insecure login modules
  • connector.client.config.override.policy set to NONE to prevent connector configurations from overriding the Kafka Connect configuration and the consumers and producers it uses

10.3.2. Configuring connectors
링크 복사

Use the Kafka Connect REST API or properties files to create, manage, and monitor connector instances. You can use the REST API when using Kafka Connect in standalone or distributed mode. You can use properties files when using Kafka Connect in standalone mode.

10.3.2.1. Using the Kafka Connect REST API to manage connectors
링크 복사

When using the Kafka Connect REST API, you can create connectors dynamically by sending PUT or POST HTTP requests to the Kafka Connect REST API, specifying the connector configuration details in the request body.

Tip

When you use the PUT command, it’s the same command for starting and updating connectors.

The REST interface listens on port 8083 by default and supports the following endpoints:

GET /connectors
Return a list of existing connectors.
POST /connectors
Create a connector. The request body has to be a JSON object with the connector configuration.
GET /connectors/<connector_name>
Get information about a specific connector.
GET /connectors/<connector_name>/config
Get configuration of a specific connector.
PUT /connectors/<connector_name>/config
Update the configuration of a specific connector.
GET /connectors/<connector_name>/status
Get the status of a specific connector.
GET /connectors/<connector_name>/tasks
Get a list of tasks for a specific connector
GET /connectors/<connector_name>/tasks/<task_id>/status
Get the status of a task for a specific connector
PUT /connectors/<connector_name>/pause
Pause the connector and all its tasks. The connector will stop processing any messages.
PUT /connectors/<connector_name>/stop
Stop the connector and all its tasks. The connector will stop processing any messages. Stopping a connector from running may be more suitable for longer durations than just pausing.
PUT /connectors/<connector_name>/resume
Resume a paused connector.
POST /connectors/<connector_name>/restart
Restart a connector in case it has failed.
POST /connectors/<connector_name>/tasks/<task_id>/restart
Restart a specific task.
DELETE /connectors/<connector_name>
Delete a connector.
GET /connectors/<connector_name>/topics
Get the topics for a specific connector.
PUT /connectors/<connector_name>/topics/reset
Empty the set of active topics for a specific connector.
GET /connectors/<connector_name>/offsets
Get the current offsets for a connector.
DELETE /connectors/<connector_name>/offsets
Reset the offsets for a connector, which must be in a stopped state.
PATCH /connectors/<connector_name>/offsets
Adjust the offsets (using an offset property in the request) for a connector, which must be in a stopped state.
GET /connector-plugins
Get a list of all supported connector plugins.
GET /connector-plugins/<connector_plugin_type>/config
Get the configuration for a connector plugin.
PUT /connector-plugins/<connector_type>/config/validate
Validate connector configuration.
10.3.2.2. Specifying connector configuration properties
링크 복사

To configure a Kafka Connect connector, you need to specify the configuration details for source or sink connectors. There are two ways to do this: through the Kafka Connect REST API, using JSON to provide the configuration, or by using properties files to define the configuration properties. The specific configuration options available for each type of connector may differ, but both methods provide a flexible way to specify the necessary settings.

The following options apply to all connectors:

name
The name of the connector, which must be unique within the current Kafka Connect instance.
connector.class
The class of the connector plug-in. For example, org.apache.kafka.connect.file.FileStreamSinkConnector.
tasks.max
The maximum number of tasks that the specified connector can use. Tasks enable the connector to perform work in parallel. The connector might create fewer tasks than specified.
key.converter
The class used to convert message keys to and from Kafka format. This overrides the default value set by the Kafka Connect configuration. For example, org.apache.kafka.connect.json.JsonConverter.
value.converter
The class used to convert message payloads to and from Kafka format. This overrides the default value set by the Kafka Connect configuration. For example, org.apache.kafka.connect.json.JsonConverter.

You must set at least one of the following options for sink connectors:

topics
A comma-separated list of topics used as input.
topics.regex
A Java regular expression of topics used as input.

For all other options, see the connector properties in the Apache Kafka documentation.

Note

Streams for Apache Kafka includes the example connector configuration files config/connect-file-sink.properties and config/connect-file-source.properties in the Streams for Apache Kafka installation directory.

10.3.3. Creating connectors using the Kafka Connect API
링크 복사

Use the Kafka Connect REST API to create a connector to use with Kafka Connect.

Prerequisites

  • A Kafka Connect installation.

Procedure

  1. Prepare a JSON payload with the connector configuration. For example: 

    {
  "name": "my-connector",
  "config": {
  "connector.class": "org.apache.kafka.connect.file.FileStreamSinkConnector",
    "tasks.max": "1",
    "topics": "my-topic-1,my-topic-2",
    "file": "/tmp/output-file.txt"
  }
}
    Copy to Clipboard Toggle word wrap

  2. Send a POST request to <KafkaConnectAddress>:8083/connectors to create the connector. The following example uses curl: 

    curl -X POST -H "Content-Type: application/json" --data @sink-connector.json http://connect0.my-domain.com:8083/connectors
    Copy to Clipboard Toggle word wrap

  3. Verify that the connector was deployed by sending a GET request to <KafkaConnectAddress>:8083/connectors. The following example uses curl: 

    curl http://connect0.my-domain.com:8083/connectors
    Copy to Clipboard Toggle word wrap

10.3.4. Deleting connectors using the Kafka Connect API
링크 복사

Use the Kafka Connect REST API to delete a connector from Kafka Connect.

Prerequisites

  • A Kafka Connect installation.

Deleting connectors

  1. Verify that the connector exists by sending a GET request to <KafkaConnectAddress>:8083/connectors/<ConnectorName>. The following example uses curl: 

    curl http://connect0.my-domain.com:8083/connectors
    Copy to Clipboard Toggle word wrap

  2. To delete the connector, send a DELETE request to <KafkaConnectAddress>:8083/connectors. The following example uses curl: 

    curl -X DELETE http://connect0.my-domain.com:8083/connectors/my-connector
    Copy to Clipboard Toggle word wrap

  3. Verify that the connector was deleted by sending a GET request to <KafkaConnectAddress>:8083/connectors. The following example uses curl: 

    curl http://connect0.my-domain.com:8083/connectors
    Copy to Clipboard Toggle word wrap

10.3.5. Adding connector plugins
링크 복사

Kafka provides example connectors to use as a starting point for developing connectors. The following example connectors are included with Streams for Apache Kafka:

FileStreamSink
Reads data from Kafka topics and writes the data to a file.
FileStreamSource
Reads data from a file and sends the data to Kafka topics.

Both connectors are contained in the libs/connect-file-<kafka_version>.redhat-<build>.jar plugin.

To use the connector plugins in Kafka Connect, you can add them to the classpath or specify a plugin path in the Kafka Connect properties file and copy the plugins to the location.

Specifying the example connectors in the classpath

CLASSPATH=/opt/kafka/libs/connect-file-<kafka_version>.redhat-<build>.jar opt/kafka/bin/connect-distributed.sh
Copy to Clipboard Toggle word wrap

Setting a plugin path

plugin.path=/opt/kafka/connector-plugins,/opt/connectors
Copy to Clipboard Toggle word wrap

The plugin.path configuration option can contain a comma-separated list of paths.

You can add more connector plugins if needed. Kafka Connect searches for and runs connector plugins at startup.

Note

When running Kafka Connect in distributed mode, plugins must be made available on all worker nodes.

Chapter 11. Using Streams for Apache Kafka with MirrorMaker 2
링크 복사

Use MirrorMaker 2 to replicate data between two or more active Kafka clusters, within or across data centers.

To configure MirrorMaker 2, edit the config/connect-mirror-maker.properties configuration file. If required, you can enable distributed tracing for MirrorMaker 2.

Handling high volumes of messages

You can tune the configuration to handle high volumes of messages. For more information, see Handling high volumes of messages.

Note

MirrorMaker 2 has features not supported by the previous version of MirrorMaker. However, you can configure MirrorMaker 2 to be used in legacy mode.

11.1. Configuring active/active or active/passive modes
링크 복사

You can use MirrorMaker 2 in active/passive or active/active cluster configurations.

active/active cluster configuration
An active/active configuration has two active clusters replicating data bidirectionally. Applications can use either cluster. Each cluster can provide the same data. In this way, you can make the same data available in different geographical locations. As consumer groups are active in both clusters, consumer offsets for replicated topics are not synchronized back to the source cluster.
active/passive cluster configuration
An active/passive configuration has an active cluster replicating data to a passive cluster. The passive cluster remains on standby. You might use the passive cluster for data recovery in the event of system failure.

The expectation is that producers and consumers connect to active clusters only. A MirrorMaker 2 cluster is required at each target destination.

11.1.1. Bidirectional replication (active/active)
링크 복사

The MirrorMaker 2 architecture supports bidirectional replication in an active/active cluster configuration.

Each cluster replicates the data of the other cluster using the concept of source and remote topics. As the same topics are stored in each cluster, remote topics are automatically renamed by MirrorMaker 2 to represent the source cluster. The name of the originating cluster is prepended to the name of the topic.

Figure 11.1. Topic renaming

MirrorMaker 2 bidirectional architecture
View larger image
MirrorMaker 2 bidirectional architecture

By flagging the originating cluster, topics are not replicated back to that cluster.

The concept of replication through remote topics is useful when configuring an architecture that requires data aggregation. Consumers can subscribe to source and remote topics within the same cluster, without the need for a separate aggregation cluster.

11.1.2. Unidirectional replication (active/passive)
링크 복사

The MirrorMaker 2 architecture supports unidirectional replication in an active/passive cluster configuration.

You can use an active/passive cluster configuration to make backups or migrate data to another cluster. In this situation, you might not want automatic renaming of remote topics.

You can override automatic renaming by adding IdentityReplicationPolicy to the source connector configuration. With this configuration applied, topics retain their original names.

11.2. Configuring MirrorMaker 2 connectors
링크 복사

Use MirrorMaker 2 connector configuration for the internal connectors that orchestrate the synchronization of data between Kafka clusters.

MirrorMaker 2 consists of the following connectors:

MirrorSourceConnector
The source connector replicates topics from a source cluster to a target cluster. It also replicates ACLs and is necessary for the MirrorCheckpointConnector to run.
MirrorCheckpointConnector
The checkpoint connector periodically tracks offsets. If enabled, it also synchronizes consumer group offsets between the source and target cluster.
MirrorHeartbeatConnector
The heartbeat connector periodically checks connectivity between the source and target cluster.

The following table describes connector properties and the connectors you configure to use them.

Expand
Table 11.1. MirrorMaker 2 connector configuration properties
PropertysourceConnectorcheckpointConnectorheartbeatConnector
admin.timeout.ms
Timeout for admin tasks, such as detecting new topics. Default is 60000 (1 minute).

✓

✓

✓

replication.policy.class
Policy to define the remote topic naming convention. Default is org.apache.kafka.connect.mirror.DefaultReplicationPolicy.

✓

✓

✓

replication.policy.separator
The separator used for topic naming in the target cluster. By default, the separator is set to a dot (.). Separator configuration is only applicable to the DefaultReplicationPolicy replication policy class, which defines remote topic names. The IdentityReplicationPolicy class does not use the property as topics retain their original names.

✓

✓

✓

consumer.poll.timeout.ms
Timeout when polling the source cluster. Default is 1000 (1 second).

✓

✓

 
offset-syncs.topic.location
The location of the offset-syncs topic, which can be the source (default) or target cluster.

✓

✓

 
topic.filter.class
Topic filter to select the topics to replicate. Default is org.apache.kafka.connect.mirror.DefaultTopicFilter.

✓

✓

 
config.property.filter.class
Topic filter to select the topic configuration properties to replicate. Default is org.apache.kafka.connect.mirror.DefaultConfigPropertyFilter.

✓

  
config.properties.exclude
Topic configuration properties that should not be replicated. Supports comma-separated property names and regular expressions.

✓

  
offset.lag.max
Maximum allowable (out-of-sync) offset lag before a remote partition is synchronized. Default is 100.

✓

  
offset-syncs.topic.replication.factor
Replication factor for the internal offset-syncs topic. Default is 3.

✓

  
refresh.topics.enabled
Enables check for new topics and partitions. Default is true.

✓

  
refresh.topics.interval.seconds
Frequency of topic refresh. Default is 600 (10 minutes). By default, a check for new topics in the source cluster is made every 10 minutes. You can change the frequency by adding refresh.topics.interval.seconds to the source connector configuration.

✓

  
replication.factor
The replication factor for new topics. Default is 2.

✓

  
sync.topic.acls.enabled
Enables synchronization of ACLs from the source cluster. Default is true. For more information, see Section 11.5, “ACL rules synchronization”.

✓

  
sync.topic.acls.interval.seconds
Frequency of ACL synchronization. Default is 600 (10 minutes).

✓

  
sync.topic.configs.enabled
Enables synchronization of topic configuration from the source cluster. Default is true.

✓

  
sync.topic.configs.interval.seconds
Frequency of topic configuration synchronization. Default 600 (10 minutes).

✓

  
checkpoints.topic.replication.factor
Replication factor for the internal checkpoints topic. Default is 3.
 

✓

 
emit.checkpoints.enabled
Enables synchronization of consumer offsets to the target cluster. Default is true.
 

✓

 
emit.checkpoints.interval.seconds
Frequency of consumer offset synchronization. Default is 60 (1 minute).
 

✓

 
group.filter.class
Group filter to select the consumer groups to replicate. Default is org.apache.kafka.connect.mirror.DefaultGroupFilter.
 

✓

 
refresh.groups.enabled
Enables check for new consumer groups. Default is true.
 

✓

 
refresh.groups.interval.seconds
Frequency of consumer group refresh. Default is 600 (10 minutes).
 

✓

 
sync.group.offsets.enabled
Enables synchronization of consumer group offsets to the target cluster __consumer_offsets topic. Default is false.
 

✓

 
sync.group.offsets.interval.seconds
Frequency of consumer group offset synchronization. Default is 60 (1 minute).
 

✓

 
emit.heartbeats.enabled
Enables connectivity checks on the target cluster. Default is true.
  

✓

emit.heartbeats.interval.seconds
Frequency of connectivity checks. Default is 1 (1 second).
  

✓

heartbeats.topic.replication.factor
Replication factor for the internal heartbeats topic. Default is 3.
  

✓

11.2.1. Changing the location of the consumer group offsets topic
링크 복사

MirrorMaker 2 tracks offsets for consumer groups using internal topics.

offset-syncs topic
The offset-syncs topic maps the source and target offsets for replicated topic partitions from record metadata.
checkpoints topic
The checkpoints topic maps the last committed offset in the source and target cluster for replicated topic partitions in each consumer group.

As they are used internally by MirrorMaker 2, you do not interact directly with these topics.

MirrorCheckpointConnector emits checkpoints for offset tracking. Offsets for the checkpoints topic are tracked at predetermined intervals through configuration. Both topics enable replication to be fully restored from the correct offset position on failover.

The location of the offset-syncs topic is the source cluster by default. You can use the offset-syncs.topic.location connector configuration to change this to the target cluster. You need read/write access to the cluster that contains the topic. Using the target cluster as the location of the offset-syncs topic allows you to use MirrorMaker 2 even if you have only read access to the source cluster.

11.2.2. Synchronizing consumer group offsets
링크 복사

The __consumer_offsets topic stores information on committed offsets for each consumer group. Offset synchronization periodically transfers the consumer offsets for the consumer groups of a source cluster into the consumer offsets topic of a target cluster.

Offset synchronization is particularly useful in an active/passive configuration. If the active cluster goes down, consumer applications can switch to the passive (standby) cluster and pick up from the last transferred offset position.

To use topic offset synchronization, enable the synchronization by adding sync.group.offsets.enabled to the checkpoint connector configuration, and setting the property to true. Synchronization is disabled by default.

When using the IdentityReplicationPolicy in the source connector, it also has to be configured in the checkpoint connector configuration. This ensures that the mirrored consumer offsets will be applied for the correct topics.

Consumer offsets are only synchronized for consumer groups that are not active in the target cluster. If the consumer groups are in the target cluster, the synchronization cannot be performed and an UNKNOWN_MEMBER_ID error is returned.

If enabled, the synchronization of offsets from the source cluster is made periodically. You can change the frequency by adding sync.group.offsets.interval.seconds and emit.checkpoints.interval.seconds to the checkpoint connector configuration. The properties specify the frequency in seconds that the consumer group offsets are synchronized, and the frequency of checkpoints emitted for offset tracking. The default for both properties is 60 seconds. You can also change the frequency of checks for new consumer groups using the refresh.groups.interval.seconds property, which is performed every 10 minutes by default.

Because the synchronization is time-based, any switchover by consumers to a passive cluster will likely result in some duplication of messages.

Note

If you have an application written in Java, you can use the RemoteClusterUtils.java utility to synchronize offsets through the application. The utility fetches remote offsets for a consumer group from the checkpoints topic.

11.2.3. Deciding when to use the heartbeat connector
링크 복사

The heartbeat connector emits heartbeats to check connectivity between source and target Kafka clusters. An internal heartbeat topic is replicated from the source cluster, which means that the heartbeat connector must be connected to the source cluster. The heartbeat topic is located on the target cluster, which allows it to do the following:

  • Identify all source clusters it is mirroring data from
  • Verify the liveness and latency of the mirroring process

This helps to make sure that the process is not stuck or has stopped for any reason. While the heartbeat connector can be a valuable tool for monitoring the mirroring processes between Kafka clusters, it’s not always necessary to use it. For example, if your deployment has low network latency or a small number of topics, you might prefer to monitor the mirroring process using log messages or other monitoring tools. If you decide not to use the heartbeat connector, simply omit it from your MirrorMaker 2 configuration.

11.2.4. Aligning the configuration of MirrorMaker 2 connectors
링크 복사

To ensure that MirrorMaker 2 connectors work properly, make sure to align certain configuration settings across connectors. Specifically, ensure that the following properties have the same value across all applicable connectors:

  • replication.policy.class
  • replication.policy.separator
  • offset-syncs.topic.location
  • topic.filter.class

For example, the value for replication.policy.class must be the same for the source, checkpoint, and heartbeat connectors. Mismatched or missing settings cause issues with data replication or offset syncing, so it’s essential to keep all relevant connectors configured with the same settings.

11.2.5. Listing the offsets of MirrorMaker 2 connectors
링크 복사

To list the offset positions of the internal MirrorMaker 2 connectors, use the GET /connectors/{connector}/offsets request with the Kafka Connect API. For more information on the Kafka Connect REST API endpoints, see Section 10.3.2, “Configuring connectors”.

11.3. Connector producer and consumer configuration
링크 복사

MirrorMaker 2 connectors use internal producers and consumers. If needed, you can configure these producers and consumers to override the default settings.

Important

Producer and consumer configuration options depend on the MirrorMaker 2 implementation, and may be subject to change.

Producer and consumer configuration applies to all connectors. You specify the configuration in the config/connect-mirror-maker.properties file.

Use the properties file to override any default configuration for the producers and consumers in the following format:

  • <source_cluster_name>.consumer.<property>
  • <source_cluster_name>.producer.<property>
  • <target_cluster_name>.consumer.<property>
  • <target_cluster_name>.producer.<property>

The following example shows how you configure the producers and consumers. Though the properties are set for all connectors, some configuration properties are only relevant to certain connectors.

Example configuration for connector producers and consumers

clusters=cluster-1,cluster-2

# ...
cluster-1.consumer.fetch.max.bytes=52428800
cluster-2.producer.batch.size=327680
cluster-2.producer.linger.ms=100
cluster-2.producer.request.timeout.ms=30000
Copy to Clipboard Toggle word wrap

11.4. Specifying a maximum number of tasks
링크 복사

Connectors create the tasks that are responsible for moving data in and out of Kafka. Each connector comprises one or more tasks that are distributed across a group of worker pods that run the tasks. Increasing the number of tasks can help with performance issues when replicating a large number of partitions or synchronizing the offsets of a large number of consumer groups.

Tasks run in parallel. Workers are assigned one or more tasks. A single task is handled by one worker pod, so you don’t need more worker pods than tasks. If there are more tasks than workers, workers handle multiple tasks.

You can specify the maximum number of connector tasks in your MirrorMaker configuration using the tasks.max property. Without specifying a maximum number of tasks, the default setting is a single task.

The heartbeat connector always uses a single task.

The number of tasks that are started for the source and checkpoint connectors is the lower value between the maximum number of possible tasks and the value for tasks.max. For the source connector, the maximum number of tasks possible is one for each partition being replicated from the source cluster. For the checkpoint connector, the maximum number of tasks possible is one for each consumer group being replicated from the source cluster. When setting a maximum number of tasks, consider the number of partitions and the hardware resources that support the process.

If the infrastructure supports the processing overhead, increasing the number of tasks can improve throughput and latency. For example, adding more tasks reduces the time taken to poll the source cluster when there is a high number of partitions or consumer groups.

tasks.max configuration for MirrorMaker connectors

clusters=cluster-1,cluster-2
# ...
tasks.max = 10
Copy to Clipboard Toggle word wrap

By default, MirrorMaker 2 checks for new consumer groups every 10 minutes. You can adjust the refresh.groups.interval.seconds configuration to change the frequency. Take care when adjusting lower. More frequent checks can have a negative impact on performance.

11.5. ACL rules synchronization
링크 복사

If AclAuthorizer is being used, ACL rules that manage access to brokers also apply to remote topics. Users that can read a source topic can read its remote equivalent.

Note

OAuth 2.0 authorization does not support access to remote topics in this way.

11.6. Running MirrorMaker 2 in dedicated mode
링크 복사

Use MirrorMaker 2 to synchronize data between Kafka clusters through configuration. This procedure shows how to configure and run a dedicated single-node MirrorMaker 2 cluster. Dedicated clusters use Kafka Connect worker nodes to mirror data between Kafka clusters.

Note

It is also possible to run MirrorMaker 2 in distributed mode. MirrorMaker 2 operates as connectors in both dedicated and distributed modes. When running a dedicated MirrorMaker cluster, connectors are configured in the Kafka Connect cluster. As a consequence, this allows direct access to the Kafka Connect cluster, the running of additional connectors, and use of the REST API. For more information, refer to the Apache Kafka documentation.

The previous version of MirrorMaker continues to be supported, by running MirrorMaker 2 in legacy mode.

The configuration must specify:

  • Each Kafka cluster
  • Connection information for each cluster, including TLS authentication

  • The replication flow and direction

    • Cluster to cluster
    • Topic to topic
  • Replication rules
  • Committed offset tracking intervals

This procedure describes how to implement MirrorMaker 2 by creating the configuration in a properties file, then passing the properties when using the MirrorMaker script file to set up the connections.

You can specify the topics and consumer groups you wish to replicate from a source cluster. You specify the names of the source and target clusters, then specify the topics and consumer groups to replicate.

In the following example, topics and consumer groups are specified for replication from cluster 1 to 2.

Example configuration to replicate specific topics and consumer groups

clusters=cluster-1,cluster-2
cluster-1->cluster-2.topics = topic-1, topic-2
cluster-1->cluster-2.groups = group-1, group-2
Copy to Clipboard Toggle word wrap

You can provide a list of names or use a regular expression. By default, all topics and consumer groups are replicated if you do not set these properties. You can also replicate all topics and consumer groups by using .* as a regular expression. However, try to specify only the topics and consumer groups you need to avoid causing any unnecessary extra load on the cluster.

Before you begin

A sample configuration properties file is provided in ./config/connect-mirror-maker.properties.

Prerequisites

  • You need Streams for Apache Kafka installed on the hosts of each Kafka cluster node you are replicating.

Procedure

  1. Open the sample properties file in a text editor, or create a new one, and edit the file to include connection information and the replication flows for each Kafka cluster.

    The following example shows a configuration to connect two clusters, cluster-1 and cluster-2, bidirectionally. Cluster names are configurable through the clusters property.

    Example MirrorMaker 2 configuration

    clusters=cluster-1,cluster-2
    1 
    

cluster-1.bootstrap.servers=<cluster_name>-kafka-bootstrap-<project_name_one>:443
    2 
    
cluster-1.security.protocol=SSL
    3 
    
cluster-1.ssl.truststore.password=<truststore_name>
cluster-1.ssl.truststore.location=<path_to_truststore>/truststore.cluster-1.jks_
cluster-1.ssl.keystore.password=<keystore_name>
cluster-1.ssl.keystore.location=<path_to_keystore>/user.cluster-1.p12

cluster-2.bootstrap.servers=<cluster_name>-kafka-bootstrap-<project_name_two>:443
    4 
    
cluster-2.security.protocol=SSL
    5 
    
cluster-2.ssl.truststore.password=<truststore_name>
cluster-2.ssl.truststore.location=<path_to_truststore>/truststore.cluster-2.jks_
cluster-2.ssl.keystore.password=<keystore_name>
cluster-2.ssl.keystore.location=<path_to_keystore>/user.cluster-2.p12

cluster-1->cluster-2.enabled=true
    6 
    
cluster-2->cluster-1.enabled=true
    7 
    
cluster-1->cluster-2.topics=.*
    8 
    
cluster-2->cluster-1.topics=topic-1, topic-2
    9 
    
cluster-1->cluster-2.groups=.*
    10 
    
cluster-2->cluster-1.groups=group-1, group-2
    11 
    

replication.policy.separator=-
    12 
    
sync.topic.acls.enabled=false
    13 
    
refresh.topics.interval.seconds=60
    14 
    
refresh.groups.interval.seconds=60
    15
    Copy to Clipboard Toggle word wrap

    1
    Each Kafka cluster is identified with its alias.
    2
    Connection information for cluster-1, using the bootstrap address and port 443. Both clusters use port 443 to connect to Kafka using OpenShift Routes.
    3
    The ssl. properties define TLS configuration for cluster-1.
    4
    Connection information for cluster-2.
    5
    The ssl. properties define the TLS configuration for cluster-2.
    6
    Replication flow enabled from cluster-1 to cluster-2.
    7
    Replication flow enabled from cluster-2 to cluster-1.
    8
    Replication of all topics from cluster-1 to cluster-2. The source connector replicates the specified topics. The checkpoint connector tracks offsets for the specified topics.
    9
    Replication of specific topics from cluster-2 to cluster-1.
    10
    Replication of all consumer groups from cluster-1 to cluster-2. The checkpoint connector replicates the specified consumer groups.
    11
    Replication of specific consumer groups from cluster-2 to cluster-1.
    12
    Defines the separator used for the renaming of remote topics.
    13
    When enabled, ACLs are applied to synchronized topics. The default is false.
    14
    The period between checks for new topics to synchronize.
    15
    The period between checks for new consumer groups to synchronize.

  2. OPTION: If required, add a policy that overrides the automatic renaming of remote topics. Instead of prepending the name with the name of the source cluster, the topic retains its original name.

    This optional setting is used for active/passive backups and data migration. 

    replication.policy.class=org.apache.kafka.connect.mirror.IdentityReplicationPolicy
    Copy to Clipboard Toggle word wrap

  3. OPTION: If you want to synchronize consumer group offsets, add configuration to enable and manage the synchronization: 

    refresh.groups.interval.seconds=60
sync.group.offsets.enabled=true
    1 
    
sync.group.offsets.interval.seconds=60
    2 
    
emit.checkpoints.interval.seconds=60
    3
    Copy to Clipboard Toggle word wrap
    1
    Optional setting to synchronize consumer group offsets, which is useful for recovery in an active/passive configuration. Synchronization is not enabled by default.
    2
    If the synchronization of consumer group offsets is enabled, you can adjust the frequency of the synchronization.
    3
    Adjusts the frequency of checks for offset tracking. If you change the frequency of offset synchronization, you might also need to adjust the frequency of these checks.

  4. Start ZooKeeper and Kafka in the target clusters: 

    ./bin/zookeeper-server-start.sh -daemon \
./config/zookeeper.properties
    Copy to Clipboard Toggle word wrap 
    ./bin/kafka-server-start.sh -daemon \
./config/server.properties
    Copy to Clipboard Toggle word wrap

  5. Start MirrorMaker with the cluster connection configuration and replication policies you defined in your properties file: 

    ./bin/connect-mirror-maker.sh \
./config/connect-mirror-maker.properties
    Copy to Clipboard Toggle word wrap

    MirrorMaker sets up connections between the clusters.

  6. For each target cluster, verify that the topics are being replicated: 

    ./bin/kafka-topics.sh --bootstrap-server <broker_address> --list
    Copy to Clipboard Toggle word wrap

11.7. (Deprecated) Using MirrorMaker 2 in legacy mode
링크 복사

This procedure describes how to configure MirrorMaker 2 to use it in legacy mode. Legacy mode supports the previous version of MirrorMaker.

The MirrorMaker script ./bin/kafka-mirror-maker.sh can run MirrorMaker 2 in legacy mode.

Important

Kafka MirrorMaker 1 (referred to as just MirrorMaker in the documentation) has been deprecated in Apache Kafka 3.0.0 and will be removed in Apache Kafka 4.0.0. As a result, Kafka MirrorMaker 1 has been deprecated in Streams for Apache Kafka as well. Kafka MirrorMaker 1 will be removed from Streams for Apache Kafka when we adopt Apache Kafka 4.0.0. As a replacement, use MirrorMaker 2 with the IdentityReplicationPolicy.

Prerequisites

You need the properties files you currently use with the legacy version of MirrorMaker.

  • ./config/consumer.properties
  • ./config/producer.properties

Procedure

  1. Edit the MirrorMaker consumer.properties and producer.properties files to turn off MirrorMaker 2 features.

    For example: 

    replication.policy.class=org.apache.kafka.mirror.LegacyReplicationPolicy
    1 
    

refresh.topics.enabled=false
    2 
    
refresh.groups.enabled=false
emit.checkpoints.enabled=false
emit.heartbeats.enabled=false
sync.topic.configs.enabled=false
sync.topic.acls.enabled=false
    Copy to Clipboard Toggle word wrap
    1
    Emulate the previous version of MirrorMaker.
    2
    MirrorMaker 2 features disabled, including the internal checkpoint and heartbeat topics

  2. Save the changes and restart MirrorMaker with the properties files you used with the previous version of MirrorMaker: 

    ./bin/kafka-mirror-maker.sh \
--consumer.config ./config/consumer.properties \
--producer.config ./config/producer.properties \
--num.streams=2
    Copy to Clipboard Toggle word wrap

    The consumer properties provide the configuration for the source cluster and the producer properties provide the target cluster configuration.

    MirrorMaker sets up connections between the clusters.

  3. Start ZooKeeper and Kafka in the target cluster: 

    ./bin/zookeeper-server-start.sh -daemon ./config/zookeeper.properties
    Copy to Clipboard Toggle word wrap 
    ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

  4. For the target cluster, verify that the topics are being replicated: 

    ./bin/kafka-topics.sh --bootstrap-server <broker_address> --list
    Copy to Clipboard Toggle word wrap

Chapter 12. Configuring logging for Kafka components
링크 복사

Configure the logging levels of Kafka components directly in the configuration properties. You can also change the broker levels dynamically for Kafka brokers, Kafka Connect, and MirrorMaker 2.

Increasing the log level detail, such as from INFO to DEBUG, can aid in troubleshooting a Kafka cluster. However, more verbose logs may also negatively impact performance and make it more difficult to diagnose issues.

12.1. Configuring Kafka logging properties
링크 복사

Kafka components use the Log4j framework for error logging. By default, logging configuration is read from the classpath or config directory using the following properties files:

  • log4j.properties for Kafka and ZooKeeper
  • connect-log4j.properties for Kafka Connect and MirrorMaker 2

If they are not set explicitly, loggers inherit the log4j.rootLogger logging level configuration in each file. You can change the logging level in these files. You can also add and set logging levels for other loggers.

You can change the location and name of logging properties file using the KAFKA_LOG4J_OPTS environment variable, which is used by the start script for the component.

Passing the name and location of the logging properties file used by Kafka brokers

export KAFKA_LOG4J_OPTS="-Dlog4j.configuration=file:/my/path/to/log4j.properties"; \
./bin/kafka-server-start.sh \
./config/server.properties
Copy to Clipboard Toggle word wrap

Passing the name and location of the logging properties file used by ZooKeeper

export KAFKA_LOG4J_OPTS="-Dlog4j.configuration=file:/my/path/to/log4j.properties"; \
./bin/zookeeper-server-start.sh -daemon \
./config/zookeeper.properties
Copy to Clipboard Toggle word wrap

Passing the name and location of the logging properties file used by Kafka Connect

export KAFKA_LOG4J_OPTS="-Dlog4j.configuration=file:/my/path/to/connect-log4j.properties"; \
./bin/connect-distributed.sh \
./config/connect-distributed.properties
Copy to Clipboard Toggle word wrap

Passing the name and location of the logging properties file used by MirrorMaker 2

export KAFKA_LOG4J_OPTS="-Dlog4j.configuration=file:/my/path/to/connect-log4j.properties"; \
./bin/connect-mirror-maker.sh \
./config/connect-mirror-maker.properties
Copy to Clipboard Toggle word wrap

12.2. Dynamically change logging levels for Kafka broker loggers
링크 복사

Kafka broker logging is provided by broker loggers in each broker. Dynamically change the logging level for broker loggers at runtime without having to restart the broker.

You can also reset broker loggers dynamically to their default logging levels.

Prerequisites

Procedure

  1. List all the broker loggers for a broker by using the kafka-configs.sh tool: 

    ./bin/kafka-configs.sh --bootstrap-server <broker_address> --describe --entity-type broker-loggers --entity-name <broker_id>
    Copy to Clipboard Toggle word wrap

    For example, for broker 0: 

    ./bin/kafka-configs.sh --bootstrap-server localhost:9092 --describe --entity-type broker-loggers --entity-name 0
    Copy to Clipboard Toggle word wrap

    This returns the logging level for each logger: TRACE, DEBUG, INFO, WARN, ERROR, or FATAL.

    For example: 

    #...
kafka.controller.ControllerChannelManager=INFO sensitive=false synonyms={}
kafka.log.TimeIndex=INFO sensitive=false synonyms={}
    Copy to Clipboard Toggle word wrap

  2. Change the logging level for one or more broker loggers. Use the --alter and --add-config options and specify each logger and its level as a comma-separated list in double quotes. 

    ./bin/kafka-configs.sh --bootstrap-server <broker_address> --alter --add-config "LOGGER-ONE=NEW-LEVEL,LOGGER-TWO=NEW-LEVEL" --entity-type broker-loggers --entity-name <broker_id>
    Copy to Clipboard Toggle word wrap

    For example, for broker 0: 

    ./bin/kafka-configs.sh --bootstrap-server localhost:9092 --alter --add-config "kafka.controller.ControllerChannelManager=WARN,kafka.log.TimeIndex=WARN" --entity-type broker-loggers --entity-name 0
    Copy to Clipboard Toggle word wrap

    If successful this returns: 

    Completed updating config for broker: 0.
    Copy to Clipboard Toggle word wrap
Resetting a broker logger

You can reset one or more broker loggers to their default logging levels by using the kafka-configs.sh tool. Use the --alter and --delete-config options and specify each broker logger as a comma-separated list in double quotes: 

./bin/kafka-configs.sh --bootstrap-server localhost:9092 --alter --delete-config "LOGGER-ONE,LOGGER-TWO" --entity-type broker-loggers --entity-name <broker_id>
Copy to Clipboard Toggle word wrap

12.3. Dynamically change logging levels for Kafka Connect and MirrorMaker 2
링크 복사

Dynamically change logging levels for Kafka Connect workers or MirrorMaker 2 connectors at runtime without having to restart.

Use the Kafka Connect API to change the log level temporarily for a worker or connector logger. The Kafka Connect API provides an admin/loggers endpoint to get or modify logging levels. When you change the log level using the API, the logger configuration in the connect-log4j.properties configuration file does not change. If required, you can permanently change the logging levels in the configuration file.

Note

You can only change the logging level of MirrorMaker 2 at runtime when in distributed or standalone mode. Dedicated MirrorMaker 2 clusters have no Kafka Connect REST API, so changing the logging level is not possible.

The default listener for the Kafka Connect API is on port 8083, which is used in this procedure. You can change or add more listeners, and also enable TLS authentication, using admin.listeners configuration.

Example listener configuration for the admin endpoint

admin.listeners=https://localhost:8083
admin.listeners.https.ssl.truststore.location=/path/to/truststore.jks
admin.listeners.https.ssl.truststore.password=123456
admin.listeners.https.ssl.keystore.location=/path/to/keystore.jks
admin.listeners.https.ssl.keystore.password=123456
Copy to Clipboard Toggle word wrap

If you do not want the admin endpoint to be available, you can disable it in the configuration by specifying an empty string.

Example listener configuration to disable the admin endpoint

admin.listeners=
Copy to Clipboard Toggle word wrap

Prerequisites

Procedure

  1. Check the current logging level for the loggers configured in the connect-log4j.properties file: 

    $ cat ./config/connect-log4j.properties

# ...
log4j.rootLogger=INFO, stdout, connectAppender
# ...
log4j.logger.org.reflections=ERROR
    Copy to Clipboard Toggle word wrap

    Use a curl command to check the logging levels from the admin/loggers endpoint of the Kafka Connect API: 

    curl -s http://localhost:8083/admin/loggers/ | jq

{
  "org.reflections": {
    "level": "ERROR"
  },
  "root": {
    "level": "INFO"
  }
}
    Copy to Clipboard Toggle word wrap

    jq prints the output in JSON format. The list shows standard org and root level loggers, plus any specific loggers with modified logging levels.

    If you configure TLS (Transport Layer Security) authentication for the admin.listeners configuration in Kafka Connect, then the address of the loggers endpoint is the value specified for admin.listeners with the protocol as https, such as https://localhost:8083.

    You can also get the log level of a specific logger: 

    curl -s http://localhost:8083/admin/loggers/org.apache.kafka.connect.mirror.MirrorCheckpointConnector | jq

{
  "level": "INFO"
}
    Copy to Clipboard Toggle word wrap

  2. Use a PUT method to change the log level for a logger: 

    curl -Ss -X PUT -H 'Content-Type: application/json' -d '{"level": "TRACE"}' http://localhost:8083/admin/loggers/root

{
  # ...

  "org.reflections": {
    "level": "TRACE"
  },
  "org.reflections.Reflections": {
    "level": "TRACE"
  },
  "root": {
    "level": "TRACE"
  }
}
    Copy to Clipboard Toggle word wrap

    If you change the root logger, the logging level for loggers that used the root logging level by default are also changed.

Chapter 13. Setting throughput and storage limits on brokers
링크 복사

This procedure describes how to set throughput and storage limits on brokers in your Kafka cluster. Enable the Strimzi Quotas plugin and configure limits using quota properties

The plugin provides storage utilization quotas and dynamic distribution of throughput limits.

  • Storage quotas throttle Kafka producers based on disk storage utilization. Limits can be specified in bytes (storage.per.volume.limit.min.available.bytes) or percentage (storage.per.volume.limit.min.available.ratio) of available disk space, applying to each disk individually. When any broker in the cluster exceeds the configured disk threshold, clients are throttled to prevent disks from filling up too quickly and exceeding capacity.
  • A total throughput limit is distributed dynamically across all clients. For example, if you set a 40 MBps producer byte-rate threshold, the distribution across two producers is not static. If one producer is using 10 MBps, the other can use up to 30 MBps.
  • Specific users (clients) can be excluded from the restrictions.
Note

With the plugin, you see only aggregated quota metrics, not per-client metrics.

Prerequisites

Procedure

  1. Edit the Kafka configuration properties file.

    Example plugin configuration

    # ...
client.quota.callback.class=io.strimzi.kafka.quotas.StaticQuotaCallback
    1 
    
client.quota.callback.static.produce=1000000
    2 
    
client.quota.callback.static.fetch=1000000
    3 
    
client.quota.callback.static.storage.per.volume.limit.min.available.bytes=500000000000
    4 
    
client.quota.callback.static.storage.check-interval=5
    5 
    
client.quota.callback.static.kafka.admin.bootstrap.servers=localhost:9092
    6 
    
client.quota.callback.static.excluded.principal.name.list=User:my-user-1;User:my-user-2
    7 
    
# ...
    Copy to Clipboard Toggle word wrap

    1
    Loads the plugin.
    2
    Sets the producer byte-rate threshold of 1 MBps.
    3
    Sets the consumer byte-rate threshold. 1 MBps.
    4
    Sets an available bytes limit of 500 GB.
    5
    Sets the interval in seconds between checks on storage to 5 seconds. The default is 60 seconds. Set this property to 0 to disable the check.
    6
    Kafka cluster bootstrap servers address. This property is required if storage.check-interval is >0. All configuration properties starting with client.quota.callback.static.kafka.admin. prefix are passed to the Kafka Admin client configuration.
    7
    Excludes my-user-1 and my-user-2 from the restrictions. Each principal must be be prefixed with User:.

    storage.per.volume.limit.min.available.bytes and storage.per.volume.limit.min.available.ratio are mutually exclusive. Only configure one of these parameters.

    Note

    The full list of supported configuration properties can be found in the plugin documentation.

  2. Start the Kafka broker with the default configuration file. 

    ./bin/kafka-server-start.sh -daemon ./config/kraft/server.properties
    Copy to Clipboard Toggle word wrap

  3. Verify that the Kafka broker is running. 

    jcmd | grep Kafka
    Copy to Clipboard Toggle word wrap

Chapter 14. Adding and removing Kafka brokers and ZooKeeper nodes
링크 복사

In a Kafka cluster, managing the addition and removal of brokers and ZooKeeper nodes is critical to maintaining a stable and scalable system. When you add to the number of available brokers, you can configure the default replication factor and minimum in-sync replicas for topics across the brokers. You can use dynamic reconfiguration to add and remove ZooKeeper nodes from an ensemble without disruption.

14.1. Scaling clusters by adding or removing brokers
링크 복사

Scaling Kafka clusters by adding brokers can increase the performance and reliability of the cluster. Adding more brokers increases available resources, allowing the cluster to handle larger workloads and process more messages. It can also improve fault tolerance by providing more replicas and backups. Conversely, removing underutilized brokers can reduce resource consumption and improve efficiency. Scaling must be done carefully to avoid disruption or data loss. By redistributing partitions across all brokers in the cluster, the resource utilization of each broker is reduced, which can increase the overall throughput of the cluster.

Note

To increase the throughput of a Kafka topic, you can increase the number of partitions for that topic. This allows the load of the topic to be shared between different brokers in the cluster. However, if every broker is constrained by a specific resource (such as I/O), adding more partitions will not increase the throughput. In this case, you need to add more brokers to the cluster.

Adding brokers when running a multi-node Kafka cluster affects the number of brokers in the cluster that act as replicas. The actual replication factor for topics is determined by settings for the default.replication.factor and min.insync.replicas, and the number of available brokers. For example, a replication factor of 3 means that each partition of a topic is replicated across three brokers, ensuring fault tolerance in the event of a broker failure.

Example replica configuration

default.replication.factor = 3
min.insync.replicas = 2
Copy to Clipboard Toggle word wrap

When you add or remove brokers, Kafka does not automatically reassign partitions. The best way to do this is using Cruise Control. You can use Cruise Control’s add-brokers and remove-brokers modes when scaling a cluster up or down.

  • Use the add-brokers mode after scaling up a Kafka cluster to move partition replicas from existing brokers to the newly added brokers.
  • Use the remove-brokers mode before scaling down a Kafka cluster to move partition replicas off the brokers that are going to be removed.

14.2. Adding nodes to a ZooKeeper cluster
링크 복사

Use dynamic reconfiguration to add nodes from a ZooKeeper cluster without stopping the entire cluster. Dynamic Reconfiguration allows ZooKeeper to change the membership of a set of nodes that make up the ZooKeeper cluster without interruption.

Prerequisites

  • Dynamic reconfiguration is enabled in the ZooKeeper configuration file (reconfigEnabled=true).
  • ZooKeeper authentication is enabled and you can access the new server using the authentication mechanism.

Procedure

Perform the following steps for each ZooKeeper server you are adding, one at a time:

  1. Add a server to the ZooKeeper cluster as described in Section 4.1, “Running a multi-node ZooKeeper cluster” and then start ZooKeeper.
  2. Note the IP address and configured access ports of the new server.

  3. Start a zookeeper-shell session for the server. Run the following command from a machine that has access to the cluster (this might be one of the ZooKeeper nodes or your local machine, if it has access). 

    ./bin/zookeeper-shell.sh <ip-address>:<zk-port>
    Copy to Clipboard Toggle word wrap

  4. In the shell session, with the ZooKeeper node running, enter the following line to add the new server to the quorum as a voting member: 

    reconfig -add server.<positive-id> = <address1>:<port1>:<port2>[:role];[<client-port-address>:]<client-port>
    Copy to Clipboard Toggle word wrap

    For example: 

    reconfig -add server.4=172.17.0.4:2888:3888:participant;172.17.0.4:2181
    Copy to Clipboard Toggle word wrap

    Where <positive-id> is the new server ID 4.

    For the two ports, <port1> 2888 is for communication between ZooKeeper servers, and <port2> 3888 is for leader election.

    The new configuration propagates to the other servers in the ZooKeeper cluster; the new server is now a full member of the quorum.

14.3. Removing nodes from a ZooKeeper cluster
링크 복사

Use dynamic reconfiguration to remove nodes from a ZooKeeper cluster without stopping the entire cluster. Dynamic Reconfiguration allows ZooKeeper to change the membership of a set of nodes that make up the ZooKeeper cluster without interruption.

Prerequisites

  • Dynamic reconfiguration is enabled in the ZooKeeper configuration file (reconfigEnabled=true).
  • ZooKeeper authentication is enabled and you can access the new server using the authentication mechanism.

Procedure

Perform the following steps, one at a time, for each ZooKeeper server you remove:

  1. Log in to the zookeeper-shell on one of the servers that will be retained after the scale down (for example, server 1).

    Note

    Access the server using the authentication mechanism configured for the ZooKeeper cluster.

  2. Remove a server, for example server 5. 

    reconfig -remove 5
    Copy to Clipboard Toggle word wrap
  3. Deactivate the server that you removed.

Chapter 15. Using Cruise Control for cluster rebalancing
링크 복사

Cruise Control is an open-source application designed to run alongside Kafka to help optimize use of cluster resources by doing the following:

  • Monitoring cluster workload
  • Rebalancing partitions based on predefined constraints

Cruise Control operations help with running a more balanced Kafka cluster that uses brokers more efficiently.

As Kafka clusters evolve, some brokers may become overloaded while others remain underutilized. Cruise Control addresses this imbalance by modeling resource utilization at the replica level—​including, CPU, disk, network load—​and generating optimization proposals (which you can approve or reject) for balanced partition assignments based on configurable optimization goals.

The cruisecontrol.properties file contains the configuration for Cruise Control. You can specify and configure all the properties listed in the Configurations section of the Cruise Control Wiki.

15.1. Cruise Control components and features
링크 복사

Cruise Control comprises four main components:

Load Monitor
Load Monitor collects the metrics and analyzes cluster workload data.
Analyzer
Analyzer generates optimization proposals based on collected data and configured goals.
Anomaly Detector
Anomaly Detector identifies and reports irregularities in cluster behavior.
Executor
Executor applies approved optimization proposals to the cluster.

Cruise Control also provides a REST API for client interactions, which Streams for Apache Kafka uses to support these features:

  • Generating optimization proposals from optimization goals
  • Rebalancing a Kafka cluster based on an optimization proposal
  • Changing topic replication factor
Note

Other Cruise Control features are not currently supported, including self healing, notifications, and write-your-own goals.

15.1.1. Optimization goals
링크 복사

Optimization goals define objectives for rebalancing, such as distributing topic replicas evenly across brokers.

They are categorized as follows:

  • Supported goals are a list of goals supported by the Cruise Control instance that can be used in its operations. By default, this list includes all goals included with Cruise Control. For a goal to be used in other categories, such as default or hard goals, it must first be listed in supported goals. To prevent a goal’s usage, remove it from this list.
  • Hard goals are preset and must be satisfied for a proposal to succeed.
  • Soft goals are preset goals with objectives that are prioritized during optimization as much as possible, without preventing a proposal from being created if all hard goals are satisfied.
  • Default goals refer to the goals used by default when generating proposals. They match the supported goals unless specifically set by the user.
  • Intra-broker goals refer to the goals used specifically for rebalances on the same broker.
  • Proposal-specific goals are a subset of supported goals configured for specific proposals.

Set proposal-specific goals at runtime. Specify other optimization goals in a configuration properties file using their fully-qualified domain names and in descending priority order.

The config/cruisecontrol.properties file contains the configuration for Cruise Control. Use the following properties to manage goals:

  • Supported goals: goals property
  • Hard goals: hard.goals property
  • Default goals: default.goals property
  • Intra-broker goals: intra.broker.goals property
15.1.1.1. Supported goals
링크 복사

Supported goals are predefined and available to use for generating Cruise Control optimization proposals. Goals not listed as supported goals cannot be used in Cruise Control operations. Some supported goals are preset as hard goals.

Configure supported goals in cruisecontrol.properties:

  • To modify supported goals, specify the goals in the goals property.
    You can adjust the priority order in the goals configuration.
  • You must specify at least one supported goal.
15.1.1.2. Hard and soft goals
링크 복사

Hard goals must be satisfied for optimization proposals to be generated. Soft goals are best-effort objectives that Cruise Control tries to meet after all hard goals are satisfied. The classification of hard and soft goals is fixed in Cruise Control code and cannot be changed.

Cruise Control first prioritizes satisfying hard goals, and then addresses soft goals in the order they are listed. A proposal meeting all hard goals is valid, even if it violates some soft goals.

For example, a soft goal might be to evenly distribute a topic’s replicas. Cruise Control continues to generate an optimization proposal even if the soft goal isn’t completely satisfied.

Configure hard goals in cruisecontrol.properties:

  • To modify hard goals, specify a subset of supported goals in the hard.goals property.
    You can adjust the priority order in the hard goals configuration.
  • To exclude a hard goal, ensure it’s not in either default.goals or hard.goals.

Increasing the number of configured hard goals will reduce the likelihood of Cruise Control generating optimization proposals.

15.1.1.3. Default goals
링크 복사

Cruise Control uses default goals to generate an optimization proposal. Default goals must be a subset of the supported optimization goals.

The optimization proposal based on this supported goals list is then generated and cached.

Configure default goals in cruisecontrol.properties:

  • To modify default goals, specify a subset of supported goals in the default.goals property.
    You can adjust the priority order in the default goals configuration.
  • You must specify at least one default goal.
15.1.1.4. Intra-broker goals
링크 복사

Cruise Control uses intra-broker goals to balance data between disks on the same broker, which is useful for deployments with JBOD storage and multiple disks.

Configure intra-broker goals in cruisecontrol.properties:

  • To modify intra-broker goals, list the supported goals in the intra.broker.goals property.
    You can adjust the priority order in the intra-broker goals configuration.
15.1.1.5. Proposal-specific goals
링크 복사

Proposal-specific optimization goals support the creation of optimization proposals based on a specific list of goals. If proposal-specific goals are not set, then default goals are used

Specify proposal-specific goals at runtime as a subset of supported optimization goals for customization.

For example, you can optimize topic leader replica distribution across the Kafka cluster without considering disk capacity or utilization by defining a single proposal-specific goal.

When specifying proposal-specific goals, include all configured hard goals, or an error occurs.

To ignore the configured hard goals in an optimization proposal, add the skip_hard_goals_check=true parameter to the request.

15.1.1.6. Goals order of priority
링크 복사

Unless you change the configuration, Streams for Apache Kafka inherits goals from Cruise Control.

The following list shows supported goals inherited by Streams for Apache Kafka from Cruise Control in descending priority order. Goals labeled as hard are mandatory constraints that must be satisfied for optimization proposals.

  • RackAwareGoal (hard)
  • MinTopicLeadersPerBrokerGoal (hard)
  • ReplicaCapacityGoal (hard)
  • DiskCapacityGoal (hard)
  • NetworkInboundCapacityGoal (hard)
  • NetworkOutboundCapacityGoal (hard)
  • CpuCapacityGoal (hard)
  • ReplicaDistributionGoal
  • PotentialNwOutGoal
  • DiskUsageDistributionGoal
  • NetworkInboundUsageDistributionGoal
  • NetworkOutboundUsageDistributionGoal
  • CpuUsageDistributionGoal
  • TopicReplicaDistributionGoal
  • LeaderReplicaDistributionGoal
  • LeaderBytesInDistributionGoal
  • PreferredLeaderElectionGoal
  • IntraBrokerDiskCapacityGoal (hard)
  • IntraBrokerDiskUsageDistributionGoal

Resource distribution goals are subject to capacity limits on broker resources.

For more information on each optimization goal, see Goals in the Cruise Control Wiki.

Note

"Write your own" goals and Kafka assigner goals are not supported.

Example configuration for default and hard goals

default.goals=com.linkedin.kafka.cruisecontrol.analyzer.goals.RackAwareGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.ReplicaCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.DiskCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.NetworkInboundCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.NetworkOutboundCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.CpuCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.ReplicaDistributionGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.PotentialNwOutGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.DiskUsageDistributionGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.NetworkInboundUsageDistributionGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.NetworkOutboundUsageDistributionGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.CpuUsageDistributionGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.TopicReplicaDistributionGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.LeaderReplicaDistributionGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.LeaderBytesInDistributionGoal

hard.goals=com.linkedin.kafka.cruisecontrol.analyzer.goals.RackAwareGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.ReplicaCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.DiskCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.NetworkInboundCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.NetworkOutboundCapacityGoal,com.linkedin.kafka.cruisecontrol.analyzer.goals.CpuCapacityGoal
Copy to Clipboard Toggle word wrap

Important

Ensure that the supported goals, default.goals, and (unless skip_hard_goals_check is set to true) proposal-specific goals include all hard goals specified in hard.goals to avoid errors when generating optimization proposals. Hard goals must be included as a subset in the supported, default, and proposal-specific goals.

Example request with proposal-specific goals

curl -v -X POST 'http://<cc_host>:<cc_port>/kafkacruisecontrol/rebalance?goals=RackAwareGoal,ReplicaCapacityGoal,ReplicaDistributionGoal&skip_hard_goal_check=true'
Copy to Clipboard Toggle word wrap

15.1.1.7. Skipping hard goal checks
링크 복사

If skip_hard_goals_check=true is specified in a request, Cruise Control does not verify that the proposal-specific goals include all the configured hard goals. This allows for more flexibility in generating optimization proposals, but may lead to proposals that do not satisfy all hard goals.

However, any hard goals included in the proposal-specific goals will still be treated as hard goals by Cruise Control, even with skip_hard_goals_check=true.

15.1.2. Optimization proposals
링크 복사

Optimization proposals are summaries of proposed changes based on the defined optimization goals, assessed in a specific order of priority. You can approve or reject proposals and rerun them with adjusted goals if needed.

With Cruise Control deployed for use in Streams for Apache Kafka, the process to generate and approve an optimization proposal is as follows:

  1. Make a request to generate an optimization proposal. This request triggers Cruise Control to initiate the optimization proposal generation process.
  2. A Cruise Control Metrics Reporter runs in every Kafka broker, collecting raw metrics and publishing them to a dedicated Kafka topic (__CruiseControlMetrics). Metrics for brokers, topics, and partitions are aggregated, sampled, and stored in other topics automatically created when Cruise Control is deployed.
  3. Load Monitor collects, processes, and stores the metrics as a workload model--including CPU, disk, and network utilization data—​which is used by the Analyzer and Anomaly Detector.
  4. Anomaly Detector continuously monitors the health and performance of the Kafka cluster, checking for things like broker failures or disk capacity issues, that could impact cluster stability.
  5. Analyzer creates optimization proposals based on the workload model from the Load Monitor. Based on configured goals and capacities, it generates an optimization proposal for balancing partitions across brokers. Through the REST API, a summary of the proposal is returned in the response to the request.
  6. The optimization proposal is approved or rejected based on its alignment with cluster management goals.
  7. If approved, the Executor applies the optimization proposal to rebalance the Kafka cluster. This involves reassigning partitions and redistributing workload across brokers according to the approved proposal.

Cruise Control optimization process

Cruise Control process

Optimization proposals comprise a list of partition reassignment mappings. When you approve a proposal, the Cruise Control server applies these partition reassignments to the Kafka cluster.

A partition reassignment consists of either of the following types of operations:

  • Partition movement: Involves transferring the partition replica and its data to a new location. Partition movements can take one of two forms:

    • Inter-broker movement: The partition replica is moved to a log directory on a different broker.
    • Intra-broker movement: The partition replica is moved to a different log directory on the same broker.
  • Leadership movement: Involves switching the leader of the partition’s replicas.

Cruise Control issues partition reassignments to the Kafka cluster in batches. The performance of the cluster during the rebalance is affected by the number and magnitude of each type of movement contained in each batch.

15.1.2.1. Rebalancing endpoints
링크 복사

Proposals for rebalances can be generated by making a request to one of three endpoints.

/rebalance endpoint
A request to this endpoint runs a full rebalance by moving replicas across all the brokers in the cluster.
/add_broker endpoint
This endpoint is used after scaling up a Kafka cluster by adding one or more brokers. Normally, after scaling up a Kafka cluster, new brokers are used to host only the partitions of newly created topics. If no new topics are created, the newly added brokers are not used and the existing brokers remain under the same load. By using the add_broker endpoint immediately after adding brokers to the cluster, the rebalancing operation moves replicas from existing brokers to the newly added brokers. You specify the new brokers in the request as a list of broker IDs.
/remove_broker
This endpoint is used before scaling down a Kafka cluster by removing one or more brokers. The operation moves replicas off the brokers that are going to be removed. When these brokers are not hosting replicas anymore, you can safely run the scaling down operation. You specify the brokers you’re removing as a list of broker IDs.

In general, use the full rebalance endpoint to rebalance a Kafka cluster by spreading the load across brokers. Use the add_broker and remove_broker endpoints only if you want to scale your cluster up or down and rebalance the replicas accordingly.

The procedure to run a rebalance is actually the same across the three different endpoints. The only difference is with specifying the endpoint in the request and, if needed, listing brokers that have been added or will be removed.

15.1.2.2. The results of an optimization proposal
링크 복사

When an optimization proposal is generated, a summary of the changes is returned.

The summary is returned in a response to a HTTP request through the Cruise Control API. The summary provides an overview of the proposed cluster rebalance and indicates the scale of the changes involved. The information provided is a summary of the full optimization proposal.

15.1.2.3. Approving or rejecting an optimization proposal
링크 복사

An optimization proposal summary shows the proposed scope of changes.

When you make a POST request to the /rebalance endpoint, an optimization proposal summary is returned in the response.

Returning an optimization proposal summary

curl -v -X POST 'http://<cc_host>:<cc_port>/kafkacruisecontrol/rebalance'
Copy to Clipboard Toggle word wrap

Use the summary to decide whether to approve or reject an optimization proposal.

Approving an optimization proposal
You approve the optimization proposal by making a POST request to the /rebalance endpoint and setting the dryrun parameter to false (default true). Cruise Control applies the proposal to the Kafka cluster and starts a cluster rebalance operation.
Rejecting an optimization proposal
If you choose not to approve an optimization proposal, you can change the optimization goals or update any of the rebalance performance tuning options, and then generate another proposal. You can resend a request without the dryrun parameter to generate a new optimization proposal.

Use optimization proposals to assess the movements required for a rebalance. For example, a summary describes inter-broker and intra-broker movements. Inter-broker rebalancing moves data between separate brokers. Intra-broker rebalancing moves data between disks on the same broker when you are using a JBOD storage configuration. Such information can be useful even if you don’t go ahead and approve the proposal.

You might reject an optimization proposal, or delay its approval, because of the additional load on a Kafka cluster when rebalancing. If the proposal is delayed for too long, the cluster load may change significantly, so it may be better to request a new proposal.

In the following example, the proposal suggests the rebalancing of data between separate brokers. The rebalance involves the movement of 55 partition replicas, totaling 12MB of data, across the brokers. The proposal will also move 24 partition leaders to different brokers. This requires a change to the cluster metadata, which has a low impact on performance.

The balancedness scores are measurements of the overall balance of the Kafka cluster before and after the optimization proposal is approved. A balancedness score is based on optimization goals. If all goals are satisfied, the score is 100. The score is reduced for each goal that will not be met. Compare the balancedness scores to see whether the Kafka cluster is less balanced than it could be following a rebalance.

Example optimization proposal summary

Optimization has 55 inter-broker replica (12 MB) moves, 0 intra-broker replica (0 MB) moves and 24 leadership moves with a cluster model of 5 recent windows and 100.000% of the partitions covered.
Excluded Topics: [].
Excluded Brokers For Leadership: [].
Excluded Brokers For Replica Move: [].
Counts: 3 brokers 343 replicas 7 topics.
On-demand Balancedness Score Before (78.012) After (82.912).
Provision Status: RIGHT_SIZED.                            a4f833bd-2055-4213-bfdd-ad21f95bf184
Copy to Clipboard Toggle word wrap

Though the inter-broker movement of partition replicas has a high impact on performance, the total amount of data is not large. If the total data was much larger, you could reject the proposal, or time when to approve the rebalance to limit the impact on the performance of the Kafka cluster.

The provision status indicates whether the current cluster configuration supports the optimization goals. Check the provision status to see if you should add or remove brokers.

Expand
Table 15.1. Optimization proposal provision status
StatusDescription

RIGHT_SIZED

The cluster has an appropriate number of brokers to satisfy the optimization goals.

UNDER_PROVISIONED

The cluster is under-provisioned and requires more brokers to satisfy the optimization goals.

OVER_PROVISIONED

The cluster is over-provisioned and requires fewer brokers to satisfy the optimization goals.

UNDECIDED

The status is not relevant or it has not yet been decided.

15.1.2.4. Optimization proposal summary properties
링크 복사

The following table explains the properties contained in the optimization proposal’s summary.

Expand
Table 15.2. Properties contained in an optimization proposal summary
PropertyDescription

<n> inter-broker replica (<y> MB) moves

<n>: The number of partition replicas that will be moved between separate brokers.

Performance impact during rebalance operation: Relatively high.

<y> MB: The sum of the size of each partition replica that will be moved to a separate broker.

Performance impact during rebalance operation: Variable. The larger the number of MBs, the longer the cluster rebalance will take to complete.

<n> intra-broker replica (<y> MB) moves

<n>: The total number of partition replicas that will be transferred between the disks of the cluster’s brokers.

Performance impact during rebalance operation: Relatively high, but less than inter-broker replica moves.

<y> MB: The sum of the size of each partition replica that will be moved between disks on the same broker.

Performance impact during rebalance operation: Variable. The larger the number, the longer the cluster rebalance will take to complete. Moving a large amount of data between disks on the same broker has less impact than between separate brokers (see inter-broker replica moves).

<n> excluded topics

The number of topics excluded from the calculation of partition replica/leader movements in the optimization proposal.

You can exclude topics in one of the following ways:

In the cruisecontrol.properties file, specify a regular expression in the topics.excluded.from.partition.movement property.

In a POST request to the /rebalance endpoint, specify a regular expression in the excluded_topics parameter.

Topics that match the regular expression are listed in the response and will be excluded from the cluster rebalance.

<n> leadership moves

<n>: The number of partitions whose leaders will be switched to different replicas.

Performance impact during rebalance operation: Relatively low.

<n> recent windows

<n>: The number of metrics windows upon which the optimization proposal is based.

<n>% of the partitions covered

<n>%: The percentage of partitions in the Kafka cluster covered by the optimization proposal.

On-demand Balancedness Score Before (<nn.yyy>) After (<nn.yyy>)

Measurements of the overall balance of a Kafka Cluster.

Cruise Control assigns a Balancedness Score to every optimization goal based on several factors, including priority (the goal’s position in the list of default.goals or user-provided goals). The On-demand Balancedness Score is calculated by subtracting the sum of the Balancedness Score of each violated soft goal from 100.

The Before score is based on the current configuration of the Kafka cluster. The After score is based on the generated optimization proposal.

15.1.2.5. Adjusting the cached proposal refresh rate
링크 복사

Cruise Control maintains a cached optimization proposal based on the configured default optimization goals. This proposal is generated from the workload model and updated every 15 minutes to reflect the current state of the Kafka cluster. When you generate an optimization proposal using the default goals, Cruise Control returns the latest cached version.

For clusters with rapidly changing workloads, you may want to shorten the refresh interval to ensure the optimization proposal reflects the most recent state. However, reducing the interval increases the load on the Cruise Control server. To adjust the refresh rate, modify the proposal.expiration.ms setting in the Cruise Control deployment configuration.

15.1.3. Tuning options for rebalances
링크 복사

Configuration options allow you to fine-tune cluster rebalance performance. These settings control the movement of partition replicas and leadership, as well as the bandwidth allocated for rebalances.

15.1.3.1. Selecting replica movement strategies
링크 복사

Cluster rebalance performance is also influenced by the replica movement strategy that is applied to the batches of partition reassignment commands. By default, Cruise Control uses the BaseReplicaMovementStrategy, which applies the reassignments in the order they were generated. However, this strategy could lead to the delay of other partition reassignments if large partition reassignments are generated then ordered first.

Cruise Control provides four alternative replica movement strategies that can be applied to optimization proposals:

  • PrioritizeSmallReplicaMovementStrategy: Reassign smaller partitions first.
  • PrioritizeLargeReplicaMovementStrategy: Reassign larger partitions first.
  • PostponeUrpReplicaMovementStrategy: Prioritize partitions without out-of-sync replicas.
  • PrioritizeMinIsrWithOfflineReplicasStrategy: Prioritize reassignments for partitions at or below their minimum in-sync replicas (MinISR) with offline replicas.
    Set concurrency.adjuster.min.isr.check.enabled in the Cruise Control configuration to enable this strategy.

These strategies can be configured as a sequence. The first strategy attempts to compare two partition reassignments using its internal logic. If the reassignments are equivalent, then it passes them to the next strategy in the sequence to decide the order, and so on.

15.1.3.2. Rebalance tuning options
링크 복사

You can set the following rebalance tuning options when configuring Cruise Control or individual rebalances:

Set the tuning options using one of the following methods:

  • Properties in the cruisecontrol.properties file
  • arameters in POST requests to the /rebalance endpoint

The relevant configurations for both methods are summarized in the following table.

Expand
Table 15.3. Rebalance performance tuning configuration
Cruise Control propertiesRebalance endpoint parametersDefaultDescription

num.concurrent.partition.movements.per.broker

concurrent_partition_movements_per_broker

5

The maximum number of inter-broker partition movements in each partition reassignment batch

num.concurrent.intra.broker.partition.movements

concurrent_intra_broker_partition_movements

2

The maximum number of intra-broker partition movements in each partition reassignment batch

num.concurrent.leader.movements

concurrent_leader_movements

1000

The maximum number of partition leadership changes in each partition reassignment batch

default.replication.throttle

replication_throttle

Null (no limit)

The bandwidth (in bytes per second) to assign to partition reassignment

default.replica.movement.strategies

replica_movement_strategies

BaseReplicaMovementStrategy

The list of strategies (in priority order) used to determine the order in which partition reassignment commands are executed for generated proposals. There are three strategies: PrioritizeSmallReplicaMovementStrategy, PrioritizeLargeReplicaMovementStrategy, and PostponeUrpReplicaMovementStrategy. For the server setting, use a comma-separated list with the fully qualified names of the strategy class (add com.linkedin.kafka.cruisecontrol.executor.strategy. to the start of each class name). For the rebalance parameters, use a comma-separated list of the class names of the replica movement strategies.

Changing the default settings affects the length of time that the rebalance takes to complete, as well as the load placed on the Kafka cluster during the rebalance. Using lower values reduces the load but increases the amount of time taken, and vice versa.

15.2. Downloading Cruise Control
링크 복사

A ZIP file distribution of Cruise Control is available for download from the Red Hat website. You can download the latest version of Red Hat Streams for Apache Kafka from the Streams for Apache Kafka software downloads page.

Procedure

  1. Download the latest version of the Red Hat Streams for Apache Kafka Cruise Control archive from the Red Hat Customer Portal.

  2. Create the /opt/cruise-control directory: 

    sudo mkdir /opt/cruise-control
    Copy to Clipboard Toggle word wrap

  3. Extract the contents of the Cruise Control ZIP file to the new directory: 

    unzip amq-streams-<version>-cruise-control-bin.zip -d /opt/cruise-control
    Copy to Clipboard Toggle word wrap

  4. Change the ownership of the /opt/cruise-control directory to the Kafka user: 

    sudo chown -R kafka:kafka /opt/cruise-control
    Copy to Clipboard Toggle word wrap

15.3. Deploying the Cruise Control Metrics Reporter
링크 복사

Before starting Cruise Control, you must configure the Kafka brokers to use the provided Cruise Control Metrics Reporter. The file for the Metrics Reporter is supplied with the Streams for Apache Kafka installation artifacts.

When loaded at runtime, the Metrics Reporter sends metrics to the __CruiseControlMetrics topic, one of three auto-created topics. Cruise Control uses these metrics to create and update the workload model and to calculate optimization proposals.

Prerequisites

  • Streams for Apache Kafka is installed on each host, and the configuration files are available.
  • You are logged in to Red Hat Enterprise Linux as the Kafka user.

Procedure

For each broker in the Kafka cluster and one at a time:

  1. Stop the Kafka broker: 

    ./bin/kafka-server-stop.sh
    Copy to Clipboard Toggle word wrap

  2. Edit the Kafka configuration properties file to configure the Cruise Control Metrics Reporter.

    1. Add the CruiseControlMetricsReporter class to the metric.reporters configuration option. Do not remove any existing Metrics Reporters. 

      metric.reporters=com.linkedin.kafka.cruisecontrol.metricsreporter.CruiseControlMetricsReporter
      Copy to Clipboard Toggle word wrap

    2. Add the following configuration options and values: 

      cruise.control.metrics.topic.auto.create=true
cruise.control.metrics.topic.num.partitions=1
cruise.control.metrics.topic.replication.factor=1
      Copy to Clipboard Toggle word wrap

      These options enable the Cruise Control Metrics Reporter to create the __CruiseControlMetrics topic with a log cleanup policy of DELETE. For more information, see Auto-created topics and Configuring logging and cleanup policy.

  3. Configure SSL, if required.

    1. In the Kafka configuration properties file, configure SSL between the Cruise Control Metrics Reporter and the Kafka broker by setting the relevant client configuration properties.

      The Metrics Reporter accepts all standard producer-specific configuration properties with the cruise.control.metrics.reporter prefix. For example: cruise.control.metrics.reporter.ssl.truststore.password.

    2. In the Cruise Control properties file (./cruise-control/config/cruisecontrol.properties) configure SSL between the Kafka broker and the Cruise Control server by setting the relevant client configuration properties.

      Cruise Control inherits SSL client property options from Kafka and uses those properties for all Cruise Control server clients.

  4. Restart the Kafka broker: 

    ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

    For information on restarting brokers in a multi-node cluster, see Section 4.3, “Performing a graceful rolling restart of Kafka brokers”.

  5. Repeat steps 1-5 for the remaining brokers.

15.4. Configuring and starting Cruise Control
링크 복사

Configure the properties used by Cruise Control and then start the Cruise Control server using the kafka-cruise-control-start.sh script. The server is hosted on a single machine for the whole Kafka cluster.

Three topics are auto-created when Cruise Control starts. For more information, see Auto-created topics.

Prerequisites

Procedure

  1. Edit the Cruise Control properties file (./cruise-control/config/cruisecontrol.properties).

  2. Configure the properties shown in the following example configuration: 

    # The Kafka cluster to control.
bootstrap.servers=localhost:9092
    1 
    

# The replication factor of Kafka metric sample store topic
sample.store.topic.replication.factor=2
    2 
    

# The configuration for the BrokerCapacityConfigFileResolver (supports JBOD, non-JBOD, and heterogeneous CPU core capacities)
#capacity.config.file=config/capacity.json
#capacity.config.file=config/capacityCores.json
capacity.config.file=config/capacityJBOD.json
    3 
    

# The list of goals to optimize the Kafka cluster for with pre-computed proposals
default.goals={List of default optimization goals}
    4 
    

# The list of supported goals
goals={list of supported optimization goals}
    5 
    

# The list of supported hard goals
hard.goals={List of hard goals}
    6 
    

# How often should the cached proposal be expired and recalculated if necessary
proposal.expiration.ms=60000
    7 
    

# The zookeeper connect of the Kafka cluster
zookeeper.connect=localhost:2181
    8
    Copy to Clipboard Toggle word wrap
    1
    Host and port numbers of the Kafka broker (always port 9092).
    2
    Replication factor of the Kafka metric sample store topic. If you are evaluating Cruise Control in a single-node Kafka and ZooKeeper cluster, set this property to 1. For production use, set this property to 2 or more.
    3
    The configuration file that sets the maximum capacity limits for broker resources. Use the file that applies to your Kafka deployment configuration. For more information, see Capacity configuration.
    4
    Comma-separated list of default optimization goals, using fully-qualified domain names (FQDNs). A number of supported optimization goals (see 5) are already set as default optimization goals; you can add or remove goals if desired.
    5
    Comma-separated list of supported optimization goals, using FQDNs. To completely exclude goals from being used to generate optimization proposals, remove them from the list.
    6
    Comma-separated list of hard goals, using FQDNs. Seven of the supported optimization goals are already set as hard goals; you can add or remove goals if desired.
    7
    The interval, in milliseconds, for refreshing the cached optimization proposal that is generated from the default optimization goals.
    8
    Host and port numbers of the ZooKeeper connection (always port 2181).

  3. Start the Cruise Control server. The server starts on port 9092 by default; optionally, specify a different port. 

    cd ./cruise-control/
./kafka-cruise-control-start.sh config/cruisecontrol.properties <port_number>
    Copy to Clipboard Toggle word wrap

  4. To verify that Cruise Control is running, send a GET request to the /state endpoint of the Cruise Control server: 

    curl -X GET 'http://<cc_host>:<cc_port>/kafkacruisecontrol/state'
    Copy to Clipboard Toggle word wrap
Auto-created topics

The following table shows the three topics that are automatically created when Cruise Control starts. These topics are required for Cruise Control to work properly and must not be deleted or changed.

Expand
Table 15.4. Auto-created topics
Auto-created topicCreated byFunction

__CruiseControlMetrics

Cruise Control Metrics Reporter

Stores the raw metrics from the Metrics Reporter in each Kafka broker.

__KafkaCruiseControlPartitionMetricSamples

Cruise Control

Stores the derived metrics for each partition. These are created by the Metric Sample Aggregator.

__KafkaCruiseControlModelTrainingSamples

Cruise Control

Stores the metrics samples used to create the Cluster Workload Model.

To ensure that log compaction is disabled in the auto-created topics, make sure that you configure the Cruise Control Metrics Reporter as described in Section 15.3, “Deploying the Cruise Control Metrics Reporter”. Log compaction can remove records that are needed by Cruise Control and prevent it from working properly.

15.5. Configuring capacity limits
링크 복사

Cruise Control uses capacity limits to determine if certain resource-based optimization goals are being broken. An attempted optimization fails if one or more of these resource-based goals is set as a hard goal and then broken. This prevents the optimization from being used to generate an optimization proposal.

You specify capacity limits for Kafka broker resources in one of the following three .json files in cruise-control/config:

  • capacityJBOD.json: For use in JBOD Kafka deployments (the default file).
  • capacity.json: For use in non-JBOD Kafka deployments where each broker has the same number of CPU cores.
  • capacityCores.json: For use in non-JBOD Kafka deployments where each broker has varying numbers of CPU cores.

Set the file in the capacity.config.file property in cruisecontrol.properties. The selected file will be used for broker capacity resolution. For example: 

capacity.config.file=config/capacityJBOD.json
Copy to Clipboard Toggle word wrap

Capacity limits can be set for the following broker resources in the described units:

  • DISK: Disk storage in MB
  • CPU: CPU utilization as a percentage (0-100) or as a number of cores
  • NW_IN: Inbound network throughput in KB per second
  • NW_OUT: Outbound network throughput in KB per second

To apply the same capacity limits to every broker monitored by Cruise Control, set capacity limits for broker ID -1. To set different capacity limits for individual brokers, specify each broker ID and its capacity configuration.

Example capacity limits configuration

{
  "brokerCapacities":[
    {
      "brokerId": "-1",
      "capacity": {
        "DISK": "100000",
        "CPU": "100",
        "NW_IN": "10000",
        "NW_OUT": "10000"
      },
      "doc": "This is the default capacity. Capacity unit used for disk is in MB, cpu is in percentage, network throughput is in KB."
    },
    {
      "brokerId": "0",
      "capacity": {
        "DISK": "500000",
        "CPU": "100",
        "NW_IN": "50000",
        "NW_OUT": "50000"
      },
      "doc": "This overrides the capacity for broker 0."
    }
  ]
}
Copy to Clipboard Toggle word wrap

For more information, see Populating the Capacity Configuration File in the Cruise Control Wiki.

15.6. Configuring logging and cleanup policy
링크 복사

Cruise Control uses log4j1 for all server logging. To change the default configuration, edit the log4j.properties file in ./cruise-control/config/log4j.properties.

You must restart the Cruise Control server before the changes take effect.

It is important that the auto-created __CruiseControlMetrics topic (see auto-created topics) has a log cleanup policy of DELETE rather than COMPACT. Otherwise, records that are needed by Cruise Control might be removed.

As described in Section 15.3, “Deploying the Cruise Control Metrics Reporter”, setting the following options in the Kafka configuration file ensures that the COMPACT log cleanup policy is correctly set:

  • cruise.control.metrics.topic.auto.create=true
  • cruise.control.metrics.topic.num.partitions=1
  • cruise.control.metrics.topic.replication.factor=1

If topic auto-creation is disabled in the Cruise Control Metrics Reporter (cruise.control.metrics.topic.auto.create=false), but enabled in the Kafka cluster, then the __CruiseControlMetrics topic is still automatically created by the broker. In this case, you must change the log cleanup policy of the __CruiseControlMetrics topic to DELETE using the kafka-configs.sh tool.

  1. Get the current configuration of the __CruiseControlMetrics topic: 

    opt/kafka/bin/kafka-configs.sh --bootstrap-server <broker_address> --entity-type topics --entity-name __CruiseControlMetrics --describe
    Copy to Clipboard Toggle word wrap

  2. Change the log cleanup policy in the topic configuration: 

    ./bin/kafka-configs.sh --bootstrap-server <broker_address> --entity-type topics --entity-name __CruiseControlMetrics --alter --add-config cleanup.policy=delete
    Copy to Clipboard Toggle word wrap

If topic auto-creation is disabled in both the Cruise Control Metrics Reporter and the Kafka cluster, you must create the __CruiseControlMetrics topic manually and then configure it to use the DELETE log cleanup policy using the kafka-configs.sh tool.

For more information, see Section 9.9, “Modifying a topic configuration”.

15.7. Generating optimization proposals
링크 복사

When you make a POST request to the /rebalance endpoint, Cruise Control generates an optimization proposal to rebalance the Kafka cluster based on the optimization goals provided. You can use the results of the optimization proposal to rebalance your Kafka cluster.

You can run the optimization proposal using one of the following endpoints:

  • /rebalance
  • /add_broker
  • /remove_broker

The endpoint you use depends on whether you are rebalancing across all the brokers already running in the Kafka cluster; or you want to rebalance after adding brokers (scaling up) or before removing brokers (scaling down).

The optimization proposal is generated as a dry run, unless the dryrun parameter is supplied and set to false. In "dry run mode", Cruise Control generates the optimization proposal and the estimated result, but doesn’t initiate the proposal by rebalancing the cluster.

You can analyze the information returned in the optimization proposal and decide whether to approve it.

Use the following parameters to make requests to the endpoints:

dryrun

type: boolean, default: true

Informs Cruise Control whether you want to generate an optimization proposal only (true), or generate an optimization proposal and perform a cluster rebalance (false).

When dryrun=true (the default), you can also pass the verbose parameter to return more detailed information about the state of the Kafka cluster. This includes metrics for the load on each Kafka broker before and after the optimization proposal is applied, and the differences between the before and after values.

excluded_topics

type: regex

A regular expression that matches the topics to exclude from the calculation of the optimization proposal.

goals

type: list of strings, default: the configured default.goals list

List of user-provided optimization goals to use to prepare the optimization proposal. If goals are not supplied, the configured default.goals list in the cruisecontrol.properties file is used.

skip_hard_goals_check

type: boolean, default: false

By default, Cruise Control checks that the user-provided optimization goals (in the goals parameter) contain all the configured hard goals (in hard.goals). A request fails if you supply goals that are not a subset of the configured hard.goals.

Set skip_hard_goals_check to true if you want to generate an optimization proposal with user-provided optimization goals that do not include all the configured hard.goals.

json

type: boolean, default: false

Controls the type of response returned by the Cruise Control server. If not supplied, or set to false, then Cruise Control returns text formatted for display on the command line. If you want to extract elements of the returned information programmatically, set json=true. This will return JSON formatted text that can be piped to tools such as jq, or parsed in scripts and programs.

verbose

type: boolean, default: false

Controls the level of detail in responses that are returned by the Cruise Control server. Can be used with dryrun=true.

Note

Other parameters are available. For more information, see REST APIs in the Cruise Control Wiki.

Prerequisites

Procedure

  1. Generate an optimization proposal using a POST request to the /rebalance, /add_broker, or /remove_broker endpoint.

    Example request to /rebalance using default goals

    curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/rebalance'
    Copy to Clipboard Toggle word wrap

    The cached optimization proposal is immediately returned.

    Note

    If NotEnoughValidWindows is returned, Cruise Control has not yet recorded enough metrics data to generate an optimization proposal. Wait a few minutes and then resend the request.

    Example request to /rebalance using specified goals

    curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/rebalance?goals=RackAwareGoal,ReplicaCapacityGoal'
    Copy to Clipboard Toggle word wrap

    If the request satisfies the supplied goals, the cached optimization proposal is immediately returned. Otherwise, a new optimization proposal is generated using the supplied goals; this takes longer to calculate. You can enforce this behavior by adding the ignore_proposal_cache=true parameter to the request.

    Example request to /rebalance using specified goals without hard goals

    curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/rebalance?goals=RackAwareGoal,ReplicaCapacityGoal,ReplicaDistributionGoal&skip_hard_goal_check=true'
    Copy to Clipboard Toggle word wrap

    Example request to /add_broker that includes specified brokers

    curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/add_broker?brokerid=3,4'
    Copy to Clipboard Toggle word wrap

    The request includes the IDs of the new brokers only. For example, this request adds brokers with the IDs 3 and 4. Replicas are moved to the new brokers from existing brokers when rebalancing.

    Example request to /remove_broker that excludes specified brokers

    curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/remove_broker?brokerid=3,4'
    Copy to Clipboard Toggle word wrap

    The request includes the IDs of the brokers being excluded only. For example, this request excludes brokers with the IDs 3 and 4. Replicas are moved from the brokers being removed to other existing brokers when rebalancing.

    Note

    If a broker that is being removed has excluded topics, replicas are still moved.

  2. Review the optimization proposal contained in the response. The properties describe the pending cluster rebalance operation.

    The proposal contains a high level summary of the proposed optimization, followed by summaries for each default optimization goal, and the expected cluster state after the proposal has executed.

    Pay particular attention to the following information:

    • The Cluster load after rebalance summary. If it meets your requirements, you should assess the impact of the proposed changes using the high level summary.
    • n inter-broker replica (y MB) moves indicates how much data will be moved across the network between brokers. The higher the value, the greater the potential performance impact on the Kafka cluster during the rebalance.
    • n intra-broker replica (y MB) moves indicates how much data will be moved within the brokers themselves (between disks). The higher the value, the greater the potential performance impact on individual brokers (although less than that of n inter-broker replica (y MB) moves).
    • The number of leadership moves. This has a negligible impact on the performance of the cluster during the rebalance.
Asynchronous responses

The Cruise Control REST API endpoints timeout after 10 seconds by default, although proposal generation continues on the server. A timeout might occur if the most recent cached optimization proposal is not ready, or if user-provided optimization goals were specified with ignore_proposal_cache=true.

To allow you to retrieve the optimization proposal at a later time, take note of the request’s unique identifier, which is given in the header of responses from the /rebalance endpoint.

To obtain the response using curl, specify the verbose (-v) option: 

curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/rebalance'
Copy to Clipboard Toggle word wrap

Here is an example header: 

* Connected to cruise-control-server (::1) port 9090 (#0)
> POST /kafkacruisecontrol/rebalance HTTP/1.1
> Host: cc-host:9090
> User-Agent: curl/7.70.0
> Accept: /
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< Date: Mon, 01 Jun 2023 15:19:26 GMT
< Set-Cookie: JSESSIONID=node01wk6vjzjj12go13m81o7no5p7h9.node0; Path=/
< Expires: Thu, 01 Jan 1970 00:00:00 GMT
< User-Task-ID: 274b8095-d739-4840-85b9-f4cfaaf5c201
< Content-Type: text/plain;charset=utf-8
< Cruise-Control-Version: 2.0.103.redhat-00002
< Cruise-Control-Commit_Id: 58975c9d5d0a78dd33cd67d4bcb497c9fd42ae7c
< Content-Length: 12368
< Server: Jetty(9.4.26.v20200117-redhat-00001)
Copy to Clipboard Toggle word wrap

If an optimization proposal is not ready within the timeout, you can re-submit the POST request, this time including the User-Task-ID of the original request in the header: 

curl -v -X POST -H 'User-Task-ID: 274b8095-d739-4840-85b9-f4cfaaf5c201' 'cruise-control-server:9090/kafkacruisecontrol/rebalance'
Copy to Clipboard Toggle word wrap

What to do next

Section 15.8, “Approving optimization proposals”

15.8. Approving optimization proposals
링크 복사

If you are satisfied with your most recently generated optimization proposal, you can instruct Cruise Control to initiate a cluster rebalance and begin reassigning partitions.

Leave as little time as possible between generating an optimization proposal and initiating the cluster rebalance. If some time has passed since you generated the original optimization proposal, the cluster state might have changed. Therefore, the cluster rebalance that is initiated might be different to the one you reviewed. If in doubt, first generate a new optimization proposal.

Only one cluster rebalance, with a status of "Active", can be in progress at a time.

Prerequisites

Procedure

  1. Send a POST request to the /rebalance, /add_broker, or /remove_broker endpoint with the dryrun=false parameter:

    If you used the /add_broker or /remove_broker endpoint to generate a proposal that included or excluded brokers, use the same endpoint to perform the rebalance with or without the specified brokers.

    Example request to /rebalance

    curl -X POST 'cruise-control-server:9090/kafkacruisecontrol/rebalance?dryrun=false'
    Copy to Clipboard Toggle word wrap

    Example request to /add_broker

    curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/add_broker?dryrun=false&brokerid=3,4'
    Copy to Clipboard Toggle word wrap

    Example request to /remove_broker

    curl -v -X POST 'cruise-control-server:9090/kafkacruisecontrol/remove_broker?dryrun=false&brokerid=3,4'
    Copy to Clipboard Toggle word wrap

    Cruise Control initiates the cluster rebalance and returns the optimization proposal.

  2. Check the changes that are summarized in the optimization proposal. If the changes are not what you expect, you can stop the rebalance.

  3. Check the progress of the cluster rebalance using the /user_tasks endpoint. The cluster rebalance in progress has a status of "Active".

    To view all cluster rebalance tasks executed on the Cruise Control server: 

    curl 'cruise-control-server:9090/kafkacruisecontrol/user_tasks'

USER TASK ID      CLIENT ADDRESS  START TIME     STATUS  REQUEST URL
c459316f-9eb5-482f-9d2d-97b5a4cd294d  0:0:0:0:0:0:0:1       2020-06-01_16:10:29 UTC  Active      POST /kafkacruisecontrol/rebalance?dryrun=false
445e2fc3-6531-4243-b0a6-36ef7c5059b4  0:0:0:0:0:0:0:1       2020-06-01_14:21:26 UTC  Completed   GET /kafkacruisecontrol/state?json=true
05c37737-16d1-4e33-8e2b-800dee9f1b01  0:0:0:0:0:0:0:1       2020-06-01_14:36:11 UTC  Completed   GET /kafkacruisecontrol/state?json=true
aebae987-985d-4871-8cfb-6134ecd504ab  0:0:0:0:0:0:0:1       2020-06-01_16:10:04 UTC
    Copy to Clipboard Toggle word wrap

  4. To view the status of a particular cluster rebalance task, supply the user-task-ids parameter and the task ID: 

    curl 'cruise-control-server:9090/kafkacruisecontrol/user_tasks?user_task_ids=c459316f-9eb5-482f-9d2d-97b5a4cd294d'
    Copy to Clipboard Toggle word wrap

(Optional) Removing brokers when scaling down

After a successful rebalance you can stop any brokers you excluded in order to scale down the Kafka cluster.

  1. Check that each broker being removed does not have any live partitions in its log (log.dirs). 

    ls -l <LogDir> | grep -E '^d' | grep -vE '[a-zA-Z0-9.-]+\.[a-z0-9]+-delete$'
    Copy to Clipboard Toggle word wrap

    If a log directory does not match the regular expression \.[a-z0-9]-delete$, active partitions are still present. If you have active partitions, check the rebalance has finished or the configuration for the optimization proposal. You can run the proposal again. Make sure that there are no active partitions before moving on to the next step.

  2. Stop the broker. 

    ./bin/kafka-server-stop.sh
    Copy to Clipboard Toggle word wrap

  3. Confirm that the broker has stopped. 

    jcmd | grep kafka
    Copy to Clipboard Toggle word wrap

15.9. Stopping rebalances
링크 복사

You can stop the cluster rebalance that is currently in progress.

This instructs Cruise Control to finish the current batch of partition reassignments and then stop the rebalance. When the rebalance has stopped, completed partition reassignments have already been applied; therefore, the state of the Kafka cluster is different when compared to before the start of the rebalance operation. If further rebalancing is required, you should generate a new optimization proposal.

Note

The performance of the Kafka cluster in the intermediate (stopped) state might be worse than in the initial state.

Prerequisites

  • A cluster rebalance is in progress (indicated by a status of "Active").

Procedure

  • Send a POST request to the /stop_proposal_execution endpoint: 

    curl -X POST 'cruise-control-server:9090/kafkacruisecontrol/stop_proposal_execution'
    Copy to Clipboard Toggle word wrap

Chapter 16. Using Cruise Control to modify topic replication factor
링크 복사

Make requests to the /topic_configuration endpoint of the Cruise Control REST API to modify topic configurations, including the replication factor.

Prerequisites

Procedure

  1. Start the Cruise Control server. The server starts on port 9092 by default; optionally, specify a different port. 

    cd ./cruise-control/
./kafka-cruise-control-start.sh config/cruisecontrol.properties <port_number>
    Copy to Clipboard Toggle word wrap

  2. To verify that Cruise Control is running, send a GET request to the /state endpoint of the Cruise Control server: 

    curl -X GET 'http://<cc_host>:<cc_port>/kafkacruisecontrol/state'
    Copy to Clipboard Toggle word wrap

  3. Run the bin/kafka-topics.sh command with the --describe option to check the current replication factor of the target topic: 

    ./bin/kafka-topics.sh \
  --bootstrap-server localhost:9092 \
  --topic <topic_name> \
  --describe
    Copy to Clipboard Toggle word wrap

  4. Update the replication factor for the topic: 

    curl -X POST 'http://<cc_host>:<cc_port>/kafkacruisecontrol/topic_configuration?topic=<topic_name>&replication_factor=<new_replication_factor>&dryrun=false'
    Copy to Clipboard Toggle word wrap

    For example, curl -X POST 'localhost:9090/kafkacruisecontrol/topic_configuration?topic=topic1&replication_factor=3&dryrun=false'.

  5. Run the bin/kafka-topics.sh command with the --describe option, as before, to see the results of the change to the topic.

Chapter 17. Using the partition reassignment tool
링크 복사

When scaling a Kafka cluster, you may need to add or remove brokers and update the distribution of partitions or the replication factor of topics. To update partitions and topics, you can use the kafka-reassign-partitions.sh tool.

The tool can be used to reassign partitions and balance the distribution of partitions across brokers to improve performance. You can also change the replication factor of a topic. However, it is recommended to use Cruise Control for automated partition reassignments and cluster rebalancing and changing the topic replication factor. Cruise Control can move topics from one broker to another without any downtime, and it is the most efficient way to reassign partitions.

17.1. Partition reassignment tool overview
링크 복사

The partition reassignment tool provides the following capabilities for managing Kafka partitions and brokers:

Redistributing partition replicas
Scale your cluster up and down by adding or removing brokers, and move Kafka partitions from heavily loaded brokers to under-utilized brokers. To do this, you must create a partition reassignment plan that identifies which topics and partitions to move and where to move them. Cruise Control is recommended for this type of operation as it automates the cluster rebalancing process.
Scaling topic replication factor up and down
Increase or decrease the replication factor of your Kafka topics. To do this, you must create a partition reassignment plan that identifies the existing replication assignment across partitions and an updated assignment with the replication factor changes.
Changing the preferred leader

Change the preferred leader of a Kafka partition. In Kafka, the partition leader is the only partition that accepts writes from message producers, and therefore has the most complete log across all replicas.

Changing the preferred leader can be useful if you want to redistribute load across the brokers in the cluster. If the preferred leader is unavailable, another in-sync replica is automatically elected as leader, or the partition goes offline if there are no in-sync replicas. A background thread moves the leader role to the preferred replica when it is in sync. Therefore, changing the preferred replicas only makes sense in the context of a cluster rebalancing.

To do this, you must create a partition reassignment plan that specifies the new preferred leader for each partition by changing the order of replicas. In Kafka’s leader election process, the preferred leader is prioritized by the order of replicas. The first broker in the order of replicas is designated as the preferred leader. This designation is important for load balancing by distributing partition leaders across the Kafka cluster. However, this alone might not be sufficient for optimal load balancing, as some partitions may have higher usage than others. Cruise Control can help address this by providing more comprehensive cluster rebalancing.

Changing the log directories to use a specific JBOD volume
Change the log directories of your Kafka brokers to use a specific JBOD volume. This can be useful if you want to move your Kafka data to a different disk or storage device. To do this, you must create a partition reassignment plan that specifies the new log directory for each topic.

17.1.1. Generating a partition reassignment plan
링크 복사

The partition reassignment tool (kafka-reassign-partitions.sh) works by generating a partition assignment plan that specifies which partitions should be moved from their current broker to a new broker.

If you are satisfied with the plan, you can execute it. The tool then does the following:

  • Migrates the partition data to the new broker
  • Updates the metadata on the Kafka brokers to reflect the new partition assignments
  • Triggers a rolling restart of the Kafka brokers to ensure that the new assignments take effect

The partition reassignment tool has three different modes:

--generate
Takes a set of topics and brokers and generates a reassignment JSON file which will result in the partitions of those topics being assigned to those brokers. Because this operates on whole topics, it cannot be used when you only want to reassign some partitions of some topics.
--execute
Takes a reassignment JSON file and applies it to the partitions and brokers in the cluster. Brokers that gain partitions as a result become followers of the partition leader. For a given partition, once the new broker has caught up and joined the ISR (in-sync replicas) the old broker will stop being a follower and will delete its replica.
--verify
Using the same reassignment JSON file as the --execute step, --verify checks whether all the partitions in the file have been moved to their intended brokers. If the reassignment is complete, --verify also removes any traffic throttles (--throttle) that are in effect. Unless removed, throttles will continue to affect the cluster even after the reassignment has finished.

It is only possible to have one reassignment running in a cluster at any given time, and it is not possible to cancel a running reassignment. If you must cancel a reassignment, wait for it to complete and then perform another reassignment to revert the effects of the first reassignment. The kafka-reassign-partitions.sh will print the reassignment JSON for this reversion as part of its output. Very large reassignments should be broken down into a number of smaller reassignments in case there is a need to stop in-progress reassignment.

17.1.2. Specifying topics in a partition reassignment JSON file
링크 복사

The kafka-reassign-partitions.sh tool uses a reassignment JSON file that specifies the topics to reassign. You can generate a reassignment JSON file or create a file manually if you want to move specific partitions.

A basic reassignment JSON file has the structure presented in the following example, which describes three partitions belonging to two Kafka topics. Each partition is reassigned to a new set of replicas, which are identified by their broker IDs. The version, topic, partition, and replicas properties are all required.

Example partition reassignment JSON file structure

{
  "version": 1,
1 

  "partitions": [
2 

    {
      "topic": "example-topic-1",
3 

      "partition": 0,
4 

      "replicas": [1, 2, 3]
5 

    },
    {
      "topic": "example-topic-1",
      "partition": 1,
      "replicas": [2, 3, 4]
    },
    {
      "topic": "example-topic-2",
      "partition": 0,
      "replicas": [3, 4, 5]
    }
  ]
}
Copy to Clipboard Toggle word wrap

1
The version of the reassignment JSON file format. Currently, only version 1 is supported, so this should always be 1.
2
An array that specifies the partitions to be reassigned.
3
The name of the Kafka topic that the partition belongs to.
4
The ID of the partition being reassigned.
5
An ordered array of the IDs of the brokers that should be assigned as replicas for this partition. The first broker in the list is the leader replica.
Note

Partitions not included in the JSON are not changed.

If you specify only topics using a topics array, the partition reassignment tool reassigns all the partitions belonging to the specified topics.

Example reassignment JSON file structure for reassigning all partitions for a topic

{
  "version": 1,
  "topics": [
    { "topic": "my-topic"}
  ]
}
Copy to Clipboard Toggle word wrap

17.1.3. Reassigning partitions between JBOD volumes
링크 복사

When using JBOD storage in your Kafka cluster, you can reassign the partitions between specific volumes and their log directories (each volume has a single log directory).

To reassign a partition to a specific volume, add log_dirs values for each partition in the reassignment JSON file. Each log_dirs array contains the same number of entries as the replicas array, since each replica should be assigned to a specific log directory. The log_dirs array contains either an absolute path to a log directory or the special value any. The any value indicates that Kafka can choose any available log directory for that replica, which can be useful when reassigning partitions between JBOD volumes.

Example reassignment JSON file structure with log directories

{
  "version": 1,
  "partitions": [
    {
      "topic": "example-topic-1",
      "partition": 0,
      "replicas": [1, 2, 3]
      "log_dirs": ["/var/lib/kafka/data-0/kafka-log1", "any", "/var/lib/kafka/data-1/kafka-log2"]
    },
    {
      "topic": "example-topic-1",
      "partition": 1,
      "replicas": [2, 3, 4]
      "log_dirs": ["any",  "/var/lib/kafka/data-2/kafka-log3", "/var/lib/kafka/data-3/kafka-log4"]
    },
    {
      "topic": "example-topic-2",
      "partition": 0,
      "replicas": [3, 4, 5]
      "log_dirs": ["/var/lib/kafka/data-4/kafka-log5", "any",  "/var/lib/kafka/data-5/kafka-log6"]
    }
  ]
}
Copy to Clipboard Toggle word wrap

17.1.4. Throttling partition reassignment
링크 복사

Partition reassignment can be a slow process because it involves transferring large amounts of data between brokers. To avoid a detrimental impact on clients, you can throttle the reassignment process. Use the --throttle parameter with the kafka-reassign-partitions.sh tool to throttle a reassignment. You specify a maximum threshold in bytes per second for the movement of partitions between brokers. For example, --throttle 5000000 sets a maximum threshold for moving partitions of 50 MBps.

Throttling might cause the reassignment to take longer to complete.

  • If the throttle is too low, the newly assigned brokers will not be able to keep up with records being published and the reassignment will never complete.
  • If the throttle is too high, clients will be impacted.

For example, for producers, this could manifest as higher than normal latency waiting for acknowledgment. For consumers, this could manifest as a drop in throughput caused by higher latency between polls.

17.2. Reassigning partitions after adding brokers
링크 복사

Use a reassignment file generated by the kafka-reassign-partitions.sh tool to reassign partitions after increasing the number of brokers in a Kafka cluster. The reassignment file should describe how partitions are reassigned to brokers in the enlarged Kafka cluster. You apply the reassignment specified in the file to the brokers and then verify the new partition assignments.

This procedure describes a secure scaling process that uses TLS. You’ll need a Kafka cluster that uses TLS encryption and mTLS authentication.

Note

Though you can use the kafka-reassign-partitions.sh tool, Cruise Control is recommended for automated partition reassignments and cluster rebalancing. Cruise Control can move topics from one broker to another without any downtime, and it is the most efficient way to reassign partitions.

Prerequisites

  • An existing Kafka cluster.
  • A new machine with the additional AMQ broker installed.

  • You have created a JSON file to specify how partitions should be reassigned to brokers in the enlarged cluster.

    In this procedure, we are reassigning all partitions for a topic called my-topic. A JSON file named topics.json specifies the topic, and is used to generate a reassignment.json file.

Example JSON file specifies my-topic

{
  "version": 1,
  "topics": [
    { "topic": "my-topic"}
  ]
}
Copy to Clipboard Toggle word wrap

Procedure

  1. Create a configuration file for the new broker using the same settings as for the other brokers in your cluster, except for broker.id, which should be a number that is not already used by any of the other brokers.

  2. Start the new Kafka broker passing the configuration file you created in the previous step as the argument to the kafka-server-start.sh script: 

    ./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

  3. Verify that the Kafka broker is running. 

    jcmd | grep Kafka
    Copy to Clipboard Toggle word wrap
  4. Repeat the above steps for each new broker.

  5. If you haven’t done so, generate a reassignment JSON file named reassignment.json using the kafka-reassign-partitions.sh tool.

    Example command to generate the reassignment JSON file

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --topics-to-move-json-file topics.json \
    1 
    
  --broker-list 0,1,2,3,4 \
    2 
    
  --generate
    Copy to Clipboard Toggle word wrap

    1
    The JSON file that specifies the topic.
    2
    Brokers IDs in the kafka cluster to include in the operation. This assumes broker 4 has been added.

    Example reassignment JSON file showing the current and proposed replica assignment

    Current partition replica assignment
{"version":1,"partitions":[{"topic":"my-topic","partition":0,"replicas":[0,1,2],"log_dirs":["any","any","any"]},{"topic":"my-topic","partition":1,"replicas":[1,2,3],"log_dirs":["any","any","any"]},{"topic":"my-topic","partition":2,"replicas":[2,3,0],"log_dirs":["any","any","any"]}]}

Proposed partition reassignment configuration
{"version":1,"partitions":[{"topic":"my-topic","partition":0,"replicas":[0,1,2,3],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":1,"replicas":[1,2,3,4],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":2,"replicas":[2,3,4,0],"log_dirs":["any","any","any","any"]}]}
    Copy to Clipboard Toggle word wrap

    Save a copy of this file locally in case you need to revert the changes later on.

  6. Run the partition reassignment using the --execute option. 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --execute
    Copy to Clipboard Toggle word wrap

    If you are going to throttle replication you can also pass the --throttle option with an inter-broker throttled rate in bytes per second. For example: 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --throttle 5000000 \
  --execute
    Copy to Clipboard Toggle word wrap

  7. Verify that the reassignment has completed using the --verify option. 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --verify
    Copy to Clipboard Toggle word wrap

    The reassignment has finished when the --verify command reports that each of the partitions being moved has completed successfully. This final --verify will also have the effect of removing any reassignment throttles.

17.3. Reassigning partitions before removing brokers
링크 복사

Use a reassignment file generated by the kafka-reassign-partitions.sh tool to reassign partitions before decreasing the number of brokers in a Kafka cluster. The reassignment file must describe how partitions are reassigned to the remaining brokers in the Kafka cluster. You apply the reassignment specified in the file to the brokers and then verify the new partition assignments. Brokers in the highest numbered pods are removed first.

This procedure describes a secure scaling process that uses TLS. You’ll need a Kafka cluster that uses TLS encryption and mTLS authentication.

Note

Though you can use the kafka-reassign-partitions.sh tool, Cruise Control is recommended for automated partition reassignments and cluster rebalancing. Cruise Control can move topics from one broker to another without any downtime, and it is the most efficient way to reassign partitions.

Prerequisites

  • An existing Kafka cluster.

  • You have created a JSON file to specify how partitions should be reassigned to brokers in the reduced cluster.

    In this procedure, we are reassigning all partitions for a topic called my-topic. A JSON file named topics.json specifies the topic, and is used to generate a reassignment.json file.

Example JSON file specifies my-topic

{
  "version": 1,
  "topics": [
    { "topic": "my-topic"}
  ]
}
Copy to Clipboard Toggle word wrap

Procedure

  1. If you haven’t done so, generate a reassignment JSON file named reassignment.json using the kafka-reassign-partitions.sh tool.

    Example command to generate the reassignment JSON file

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --topics-to-move-json-file topics.json \
    1 
    
  --broker-list 0,1,2,3 \
    2 
    
  --generate
    Copy to Clipboard Toggle word wrap

    1
    The JSON file that specifies the topic.
    2
    Brokers IDs in the kafka cluster to include in the operation. This assumes broker 4 has been removed.

    Example reassignment JSON file showing the current and proposed replica assignment

    Current partition replica assignment
{"version":1,"partitions":[{"topic":"my-topic","partition":0,"replicas":[3,4,2,0],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":1,"replicas":[0,2,3,1],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":2,"replicas":[1,3,0,4],"log_dirs":["any","any","any","any"]}]}

Proposed partition reassignment configuration
{"version":1,"partitions":[{"topic":"my-topic","partition":0,"replicas":[0,1,2],"log_dirs":["any","any","any"]},{"topic":"my-topic","partition":1,"replicas":[1,2,3],"log_dirs":["any","any","any"]},{"topic":"my-topic","partition":2,"replicas":[2,3,0],"log_dirs":["any","any","any"]}]}
    Copy to Clipboard Toggle word wrap

    Save a copy of this file locally in case you need to revert the changes later on.

  2. Run the partition reassignment using the --execute option. 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --execute
    Copy to Clipboard Toggle word wrap

    If you are going to throttle replication you can also pass the --throttle option with an inter-broker throttled rate in bytes per second. For example: 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --throttle 5000000 \
  --execute
    Copy to Clipboard Toggle word wrap

  3. Verify that the reassignment has completed using the --verify option. 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --verify
    Copy to Clipboard Toggle word wrap

    The reassignment has finished when the --verify command reports that each of the partitions being moved has completed successfully. This final --verify will also have the effect of removing any reassignment throttles.

  4. Check that each broker being removed does not have any live partitions in its log (log.dirs). 

    ls -l <LogDir> | grep -E '^d' | grep -vE '[a-zA-Z0-9.-]+\.[a-z0-9]+-delete$'
    Copy to Clipboard Toggle word wrap

    If a log directory does not match the regular expression \.[a-z0-9]-delete$, active partitions are still present. If you have active partitions, check the reassignment has finished or the configuration in the reassignment JSON file. You can run the reassignment again. Make sure that there are no active partitions before moving on to the next step.

  5. Stop the broker. 

    ./bin/kafka-server-stop.sh
    Copy to Clipboard Toggle word wrap

  6. Confirm that the Kafka broker has stopped. 

    jcmd | grep kafka
    Copy to Clipboard Toggle word wrap

17.4. Changing the replication factor of topics
링크 복사

Use the kafka-reassign-partitions.sh tool to change the replication factor of topics in a Kafka cluster. This can be done using a reassignment file to describe how the topic replicas should be changed.

Prerequisites

  • An existing Kafka cluster.

  • You have created a JSON file to specify the topics to include in the operation.

    In this procedure, a topic called my-topic has 4 replicas and we want to reduce it to 3. A JSON file named topics.json specifies the topic, and is used to generate a reassignment.json file.

Example JSON file specifies my-topic

{
  "version": 1,
  "topics": [
    { "topic": "my-topic"}
  ]
}
Copy to Clipboard Toggle word wrap

Procedure

  1. If you haven’t done so, generate a reassignment JSON file named reassignment.json using the kafka-reassign-partitions.sh tool.

    Example command to generate the reassignment JSON file

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --topics-to-move-json-file topics.json \
    1 
    
  --broker-list 0,1,2,3,4 \
    2 
    
  --generate
    Copy to Clipboard Toggle word wrap

    1
    The JSON file that specifies the topic.
    2
    Brokers IDs in the kafka cluster to include in the operation.

    Example reassignment JSON file showing the current and proposed replica assignment

    Current partition replica assignment
{"version":1,"partitions":[{"topic":"my-topic","partition":0,"replicas":[3,4,2,0],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":1,"replicas":[0,2,3,1],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":2,"replicas":[1,3,0,4],"log_dirs":["any","any","any","any"]}]}

Proposed partition reassignment configuration
{"version":1,"partitions":[{"topic":"my-topic","partition":0,"replicas":[0,1,2,3],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":1,"replicas":[1,2,3,4],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":2,"replicas":[2,3,4,0],"log_dirs":["any","any","any","any"]}]}
    Copy to Clipboard Toggle word wrap

    Save a copy of this file locally in case you need to revert the changes later on.

  2. Edit the reassignment.json to remove a replica from each partition.

    For example use jq to remove the last replica in the list for each partition of the topic:

    Removing the last topic replica for each partition

    jq '.partitions[].replicas |= del(.[-1])' reassignment.json > reassignment.json
    Copy to Clipboard Toggle word wrap

    Example reassignment file showing the updated replicas

    {"version":1,"partitions":[{"topic":"my-topic","partition":0,"replicas":[0,1,2],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":1,"replicas":[1,2,3],"log_dirs":["any","any","any","any"]},{"topic":"my-topic","partition":2,"replicas":[2,3,4],"log_dirs":["any","any","any","any"]}]}
    Copy to Clipboard Toggle word wrap

  3. Make the topic replica change using the --execute option. 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --execute
    Copy to Clipboard Toggle word wrap
    Note

    Removing replicas from a broker does not require any inter-broker data movement, so there is no need to throttle replication. If you are adding replicas, then you may want to change the throttle rate.

  4. Verify that the change to the topic replicas has completed using the --verify option. 

    ./bin/kafka-reassign-partitions.sh \
  --bootstrap-server localhost:9092 \
  --reassignment-json-file reassignment.json \
  --verify
    Copy to Clipboard Toggle word wrap

    The reassignment has finished when the --verify command reports that each of the partitions being moved has completed successfully. This final --verify will also have the effect of removing any reassignment throttles.

  5. Run the bin/kafka-topics.sh command with the --describe option to see the results of the change to the topics. 

    ./bin/kafka-topics.sh \
  --bootstrap-server localhost:9092 \
  --describe
    Copy to Clipboard Toggle word wrap

    Results of reducing the number of replicas for a topic

    my-topic  Partition: 0  Leader: 0  Replicas: 0,1,2 Isr: 0,1,2
my-topic  Partition: 1  Leader: 2  Replicas: 1,2,3 Isr: 1,2,3
my-topic  Partition: 2  Leader: 3  Replicas: 2,3,4 Isr: 2,3,4
    Copy to Clipboard Toggle word wrap

Chapter 18. Setting up distributed tracing
링크 복사

Distributed tracing allows you to track the progress of transactions between applications in a distributed system. In a microservices architecture, tracing tracks the progress of transactions between services. Trace data is useful for monitoring application performance and investigating issues with target systems and end-user applications.

In Streams for Apache Kafka, tracing facilitates the end-to-end tracking of messages: from source systems to Kafka, and then from Kafka to target systems and applications. It complements the metrics that are available to view in JMX metrics, as well as the component loggers.

Support for tracing is built in to the following Kafka components:

  • Kafka Connect
  • MirrorMaker
  • MirrorMaker 2
  • Streams for Apache Kafka Bridge

Tracing is not supported for Kafka brokers.

You add tracing configuration to the properties file of the component.

To enable tracing, you set environment variables and add the library of the tracing system to the Kafka classpath. For Jaeger tracing, you can add tracing artifacts for OpenTelemetry with the Jaeger Exporter.

Note

Streams for Apache Kafka no longer supports OpenTracing. If you were previously using OpenTracing with Jaeger, we encourage you to transition to using OpenTelemetry instead.

To enable tracing in Kafka producers, consumers, and Kafka Streams API applications, you instrument application code. When instrumented, clients generate trace data; for example, when producing messages or writing offsets to the log.

Note

Setting up tracing for applications and systems beyond Streams for Apache Kafka is outside the scope of this content.

18.1. Outline of procedures
링크 복사

To set up tracing for Streams for Apache Kafka, follow these procedures in order:

Note

For information on enabling tracing for the Kafka Bridge, see Using the Streams for Apache Kafka Bridge.

18.2. Tracing options
링크 복사

Distributed traces consist of spans, which represent individual units of work performed over a specific time period. When instrumented with tracers, applications generate traces that follow requests as they move through the system, making it easier to identify delays or issues.

OpenTelemetry, a telemetry framework, provides APIs for tracing that are independent of any specific backend tracing system. In Streams for Apache Kafka, the default protocol for transmitting traces between Kafka components and tracing systems is OpenTelemetry’s OTLP (OpenTelemetry Protocol), a vendor-neutral protocol.

While OTLP is the default, Streams for Apache Kafka also supports other tracing systems, such as Jaeger. Jaeger is a distributed tracing system designed for monitoring microservices, and its user interface allows you to query, filter, and analyze trace data in detail.

The Jaeger user interface showing a simple query

The Jaeger user interface showing a simple query

18.3. Environment variables for tracing
링크 복사

Use environment variables to enable tracing for Kafka components or to initialize a tracer for Kafka clients.

Tracing environment variables are subject to change. For the latest information, see the OpenTelemetry documentation.

The following table describes the key environment variables for setting up tracing with OpenTelemetry.

Expand
Table 18.1. OpenTelemetry environment variables
PropertyRequiredDescription

OTEL_SERVICE_NAME

Yes

The name of the tracing service for OpenTelemetry, such as OTLP or Jaeger.

OTEL_EXPORTER_OTLP_ENDPOINT

Yes (if using OTLP exporter)

The OTLP endpoint for exporting trace data to the tracing system. For Jaeger tracing, specify the OTEL_EXPORTER_JAEGER_ENDPOINT. For other tracing systems, specify the appropriate endpoint.

OTEL_TRACES_EXPORTER

No (unless using a non-OTLP exporter)

The exporter used for tracing. The default is otlp, which does not need to be specified. For Jaeger tracing, set this variable to jaeger. For other tracing systems, specify the appropriate exporter.

OTEL_EXPORTER_OTLP_CERTIFICATE

No (required if using TLS with OTLP)

The path to the file containing trusted certificates for TLS authentication. Required to secure communication between Kafka components and the OpenTelemetry endpoint when using TLS with the otlp exporter.

18.4. Enabling tracing for Kafka Connect
링크 복사

Enable distributed tracing for Kafka Connect using configuration properties. Only messages produced and consumed by Kafka Connect itself are traced. To trace messages sent between Kafka Connect and external systems, you must configure tracing in the connectors for those systems.

You can enable tracing that uses OpenTelemetry.

Procedure

  1. Add the tracing artifacts to the opt/kafka/libs directory.

  2. Configure producer and consumer tracing in the relevant Kafka Connect configuration file.

    • If you are running Kafka Connect in standalone mode, edit the ./config/connect-standalone.properties file.
    • If you are running Kafka Connect in distributed mode, edit the ./config/connect-distributed.properties file.

    Add the following tracing interceptor properties to the configuration file:

    Properties for OpenTelemetry

    producer.interceptor.classes=io.opentelemetry.instrumentation.kafkaclients.TracingProducerInterceptor
consumer.interceptor.classes=io.opentelemetry.instrumentation.kafkaclients.TracingConsumerInterceptor
    Copy to Clipboard Toggle word wrap

    With tracing enabled, you initialize tracing when you run the Kafka Connect script.

  3. Save the configuration file.
  4. Set the environment variables for tracing.

  5. Start Kafka Connect in standalone or distributed mode with the configuration file as a parameter (plus any connector properties):

    Running Kafka Connect in standalone mode

    ./bin/connect-standalone.sh \
./config/connect-standalone.properties \
connector1.properties \
[connector2.properties ...]
    Copy to Clipboard Toggle word wrap

    Running Kafka Connect in distributed mode

    ./bin/connect-distributed.sh ./config/connect-distributed.properties
    Copy to Clipboard Toggle word wrap

    The internal consumers and producers of Kafka Connect are now enabled for tracing.

18.5. Enabling tracing for MirrorMaker 2
링크 복사

Enable distributed tracing for MirrorMaker 2 by defining the Interceptor properties in the MirrorMaker 2 properties file. Messages are traced between Kafka clusters. The trace data records messages entering and leaving the MirrorMaker 2 component.

You can enable tracing that uses OpenTelemetry.

Procedure

  1. Add the tracing artifacts to the opt/kafka/libs directory.

  2. Configure producer and consumer tracing in the opt/kafka/config/connect-mirror-maker.properties file.

    Add the following tracing interceptor properties to the configuration file:

    Properties for OpenTelemetry

    header.converter=org.apache.kafka.connect.converters.ByteArrayConverter
producer.interceptor.classes=io.opentelemetry.instrumentation.kafkaclients.TracingProducerInterceptor
consumer.interceptor.classes=io.opentelemetry.instrumentation.kafkaclients.TracingConsumerInterceptor
    Copy to Clipboard Toggle word wrap

    ByteArrayConverter prevents Kafka Connect from converting message headers (containing trace IDs) to base64 encoding. This ensures that messages are the same in both the source and the target clusters.

    With tracing enabled, you initialize tracing when you run the Kafka MirrorMaker 2 script.

  3. Save the configuration file.
  4. Set the environment variables for tracing.

  5. Start MirrorMaker 2 with the producer and consumer configuration files as parameters: 

    ./bin/connect-mirror-maker.sh \
./config/connect-mirror-maker.properties
    Copy to Clipboard Toggle word wrap

    The internal consumers and producers of MirrorMaker 2 are now enabled for tracing.

18.6. Enabling tracing for MirrorMaker
링크 복사

Enable distributed tracing for MirrorMaker by passing the Interceptor properties as consumer and producer configuration parameters. Messages are traced from the source cluster to the target cluster. The trace data records messages entering and leaving the MirrorMaker component.

You can enable tracing that uses OpenTelemetry.

Procedure

  1. Add the tracing artifacts to the opt/kafka/libs directory.

  2. Configure producer tracing in the ./config/producer.properties file.

    Add the following tracing interceptor property:

    Producer property for OpenTelemetry

    producer.interceptor.classes=io.opentelemetry.instrumentation.kafkaclients.TracingProducerInterceptor
    Copy to Clipboard Toggle word wrap

  3. Save the configuration file.

  4. Configure consumer tracing in the ./config/consumer.properties file.

    Add the following tracing interceptor property:

    Consumer property for OpenTelemetry

    consumer.interceptor.classes=io.opentelemetry.instrumentation.kafkaclients.TracingConsumerInterceptor
    Copy to Clipboard Toggle word wrap

    With tracing enabled, you initialize tracing when you run the Kafka MirrorMaker script.

  5. Save the configuration file.
  6. Set the environment variables for tracing.

  7. Start MirrorMaker with the producer and consumer configuration files as parameters: 

    ./bin/kafka-mirror-maker.sh \
--producer.config ./config/producer.properties \
--consumer.config ./config/consumer.properties \
--num.streams=2
    Copy to Clipboard Toggle word wrap

    The internal consumers and producers of MirrorMaker are now enabled for tracing.

18.7. Initializing tracing for Kafka clients
링크 복사

Initialize a tracer for OpenTelemetry, then instrument your client applications for distributed tracing. You can instrument Kafka producer and consumer clients, and Kafka Streams API applications.

Configure and initialize a tracer using a set of tracing environment variables.

Procedure

In each client application add the dependencies for the tracer:

  1. Add the Maven dependencies to the pom.xml file for the client application:

    Dependencies for OpenTelemetry

    <dependency>
    <groupId>io.opentelemetry.semconv</groupId>
    <artifactId>opentelemetry-semconv</artifactId>
    <version>1.21.0.alpha-redhat-00001</version>
</dependency>
<dependency>
    <groupId>io.opentelemetry</groupId>
    <artifactId>opentelemetry-exporter-otlp</artifactId>
    <version>1.34.1.redhat-00001</version>
    <exclusions>
        <exclusion>
            <groupId>io.opentelemetry</groupId>
            <artifactId>opentelemetry-exporter-sender-okhttp</artifactId>
        </exclusion>
    </exclusions>
</dependency>
<dependency>
    <groupId>io.opentelemetry</groupId>
    <artifactId>opentelemetry-exporter-sender-grpc-managed-channel</artifactId>
    <version>1.34.1.redhat-00001</version>
    <scope>runtime</scope>
</dependency>
<dependency>
    <groupId>io.opentelemetry</groupId>
    <artifactId>opentelemetry-sdk-extension-autoconfigure</artifactId>
    <version>1.34.1.redhat-00001</version>
</dependency>
<dependency>
    <groupId>io.opentelemetry.instrumentation</groupId>
    <artifactId>opentelemetry-kafka-clients-2.6</artifactId>
    <version>1.32.0.redhat-00001</version>
</dependency>
<dependency>
    <groupId>io.opentelemetry</groupId>
    <artifactId>opentelemetry-sdk</artifactId>
    <version>1.34.1.redhat-00001</version>
</dependency>
<dependency>
    <groupId>io.opentelemetry</groupId>
    <artifactId>opentelemetry-exporter-sender-jdk</artifactId>
    <version>1.34.1.alpha-redhat-00001</version>
    <scope>runtime</scope>
</dependency>
<dependency>
    <groupId>io.grpc</groupId>
    <artifactId>grpc-netty-shaded</artifactId>
    <version>1.61.0.redhat-00004</version>
</dependency>
    Copy to Clipboard Toggle word wrap

  2. Define the configuration of the tracer using the tracing environment variables.

  3. Create a tracer, which is initialized with the environment variables:

    Creating a tracer for OpenTelemetry

    OpenTelemetry ot = GlobalOpenTelemetry.get();
    Copy to Clipboard Toggle word wrap

  4. Register the tracer as a global tracer: 

    GlobalTracer.register(tracer);
    Copy to Clipboard Toggle word wrap

  5. Instrument your client:

18.8. Instrumenting producers and consumers for tracing
링크 복사

Instrument application code to enable tracing in Kafka producers and consumers. Use a decorator pattern or interceptors to instrument your Java producer and consumer application code for tracing. You can then record traces when messages are produced or retrieved from a topic.

OpenTelemetry instrumentation project provides classes that support instrumentation of producers and consumers.

Decorator instrumentation
For decorator instrumentation, create a modified producer or consumer instance for tracing.
Interceptor instrumentation
For interceptor instrumentation, add the tracing capability to the consumer or producer configuration.

Prerequisites

  • You have initialized tracing for the client.

    You enable instrumentation in producer and consumer applications by adding the tracing JARs as dependencies to your project.

Procedure

Perform these steps in the application code of each producer and consumer application. Instrument your client application code using either a decorator pattern or interceptors.

  • To use a decorator pattern, create a modified producer or consumer instance to send or receive messages.

    You pass the original KafkaProducer or KafkaConsumer class.

    Example decorator instrumentation for OpenTelemetry

    // Producer instance
Producer < String, String > op = new KafkaProducer < > (
    configs,
    new StringSerializer(),
    new StringSerializer()
    );
    Producer < String, String > producer = tracing.wrap(op);
KafkaTracing tracing = KafkaTracing.create(GlobalOpenTelemetry.get());
producer.send(...);

//consumer instance
Consumer<String, String> oc = new KafkaConsumer<>(
    configs,
    new StringDeserializer(),
    new StringDeserializer()
    );
    Consumer<String, String> consumer = tracing.wrap(oc);
consumer.subscribe(Collections.singleton("mytopic"));
ConsumerRecords<Integer, String> records = consumer.poll(1000);
ConsumerRecord<Integer, String> record = ...
SpanContext spanContext = TracingKafkaUtils.extractSpanContext(record.headers(), tracer);
    Copy to Clipboard Toggle word wrap

  • To use interceptors, set the interceptor class in the producer or consumer configuration.

    You use the KafkaProducer and KafkaConsumer classes in the usual way. The TracingProducerInterceptor and TracingConsumerInterceptor interceptor classes take care of the tracing capability.

    Example producer configuration using interceptors

    senderProps.put(ProducerConfig.INTERCEPTOR_CLASSES_CONFIG,
    TracingProducerInterceptor.class.getName());

KafkaProducer<Integer, String> producer = new KafkaProducer<>(senderProps);
producer.send(...);
    Copy to Clipboard Toggle word wrap

    Example consumer configuration using interceptors

    consumerProps.put(ConsumerConfig.INTERCEPTOR_CLASSES_CONFIG,
    TracingConsumerInterceptor.class.getName());

KafkaConsumer<Integer, String> consumer = new KafkaConsumer<>(consumerProps);
consumer.subscribe(Collections.singletonList("messages"));
ConsumerRecords<Integer, String> records = consumer.poll(1000);
ConsumerRecord<Integer, String> record = ...
SpanContext spanContext = TracingKafkaUtils.extractSpanContext(record.headers(), tracer);
    Copy to Clipboard Toggle word wrap

18.9. Instrumenting Kafka Streams applications for tracing
링크 복사

Instrument application code to enable tracing in Kafka Streams API applications. Use a decorator pattern or interceptors to instrument your Kafka Streams API applications for tracing. You can then record traces when messages are produced or retrieved from a topic.

Decorator instrumentation
For decorator instrumentation, create a modified Kafka Streams instance for tracing. For OpenTelemetry, you need to create a custom TracingKafkaClientSupplier class to provide tracing instrumentation for Kafka Streams.
Interceptor instrumentation
For interceptor instrumentation, add the tracing capability to the Kafka Streams producer and consumer configuration.

Prerequisites

  • You have initialized tracing for the client.

    You enable instrumentation in Kafka Streams applications by adding the tracing JARs as dependencies to your project.

  • To instrument Kafka Streams with OpenTelemetry, you’ll need to write a custom TracingKafkaClientSupplier.

  • The custom TracingKafkaClientSupplier can extend Kafka’s DefaultKafkaClientSupplier, overriding the producer and consumer creation methods to wrap the instances with the telemetry-related code.

    Example custom TracingKafkaClientSupplier

    private class TracingKafkaClientSupplier extends DefaultKafkaClientSupplier {
    @Override
    public Producer<byte[], byte[]> getProducer(Map<String, Object> config) {
        KafkaTelemetry telemetry = KafkaTelemetry.create(GlobalOpenTelemetry.get());
        return telemetry.wrap(super.getProducer(config));
    }

    @Override
    public Consumer<byte[], byte[]> getConsumer(Map<String, Object> config) {
        KafkaTelemetry telemetry = KafkaTelemetry.create(GlobalOpenTelemetry.get());
        return telemetry.wrap(super.getConsumer(config));
    }

    @Override
    public Consumer<byte[], byte[]> getRestoreConsumer(Map<String, Object> config) {
        return this.getConsumer(config);
    }

    @Override
    public Consumer<byte[], byte[]> getGlobalConsumer(Map<String, Object> config) {
        return this.getConsumer(config);
    }
}
    Copy to Clipboard Toggle word wrap

Procedure

Perform these steps for each Kafka Streams API application.

  • To use a decorator pattern, create an instance of the TracingKafkaClientSupplier supplier interface, then provide the supplier interface to KafkaStreams.

    Example decorator instrumentation

    KafkaClientSupplier supplier = new TracingKafkaClientSupplier(tracer);
KafkaStreams streams = new KafkaStreams(builder.build(), new StreamsConfig(config), supplier);
streams.start();
    Copy to Clipboard Toggle word wrap

  • To use interceptors, set the interceptor class in the Kafka Streams producer and consumer configuration.

    The TracingProducerInterceptor and TracingConsumerInterceptor interceptor classes take care of the tracing capability.

    Example producer and consumer configuration using interceptors

    props.put(StreamsConfig.PRODUCER_PREFIX + ProducerConfig.INTERCEPTOR_CLASSES_CONFIG, TracingProducerInterceptor.class.getName());
props.put(StreamsConfig.CONSUMER_PREFIX + ConsumerConfig.INTERCEPTOR_CLASSES_CONFIG, TracingConsumerInterceptor.class.getName());
    Copy to Clipboard Toggle word wrap

18.10. Specifying tracing systems with OpenTelemetry
링크 복사

Instead of the default Jaeger system, you can specify other tracing systems that are supported by OpenTelemetry.

If you want to use another tracing system with OpenTelemetry, do the following:

  1. Add the library of the tracing system to the Kafka classpath.

  2. Add the name of the tracing system as an additional exporter environment variable.

    Additional environment variable when not using Jaeger

    OTEL_SERVICE_NAME=my-tracing-service
OTEL_TRACES_EXPORTER=zipkin
    1 
    
OTEL_EXPORTER_ZIPKIN_ENDPOINT=http://localhost:9411/api/v2/spans
    2
    Copy to Clipboard Toggle word wrap

    1
    The name of the tracing system. In this example, Zipkin is specified.
    2
    The endpoint of the specific selected exporter that listens for spans. In this example, a Zipkin endpoint is specified.

18.11. Specifying custom span names for OpenTelemetry
링크 복사

A tracing span is a logical unit of work in Jaeger, with an operation name, start time, and duration. Spans have built-in names, but you can specify custom span names in your Kafka client instrumentation where used.

Specifying custom span names is optional and only applies when using a decorator pattern in producer and consumer client instrumentation or Kafka Streams instrumentation.

Custom span names cannot be specified directly with OpenTelemetry. Instead, you retrieve span names by adding code to your client application to extract additional tags and attributes.

Example code to extract attributes

//Defines attribute extraction for a producer
private static class ProducerAttribExtractor implements AttributesExtractor < ProducerRecord < ? , ? > , Void > {
    @Override
    public void onStart(AttributesBuilder attributes, ProducerRecord < ? , ? > producerRecord) {
        set(attributes, AttributeKey.stringKey("prod_start"), "prod1");
    }
    @Override
    public void onEnd(AttributesBuilder attributes, ProducerRecord < ? , ? > producerRecord, @Nullable Void unused, @Nullable Throwable error) {
        set(attributes, AttributeKey.stringKey("prod_end"), "prod2");
    }
}
//Defines attribute extraction for a consumer
private static class ConsumerAttribExtractor implements AttributesExtractor < ConsumerRecord < ? , ? > , Void > {
    @Override
    public void onStart(AttributesBuilder attributes, ConsumerRecord < ? , ? > producerRecord) {
        set(attributes, AttributeKey.stringKey("con_start"), "con1");
    }
    @Override
    public void onEnd(AttributesBuilder attributes, ConsumerRecord < ? , ? > producerRecord, @Nullable Void unused, @Nullable Throwable error) {
        set(attributes, AttributeKey.stringKey("con_end"), "con2");
    }
}
//Extracts the attributes
public static void main(String[] args) throws Exception {
        Map < String, Object > configs = new HashMap < > (Collections.singletonMap(ProducerConfig.BOOTSTRAP_SERVERS_CONFIG, "localhost:9092"));
        System.setProperty("otel.traces.exporter", "jaeger");
        System.setProperty("otel.service.name", "myapp1");
        KafkaTracing tracing = KafkaTracing.newBuilder(GlobalOpenTelemetry.get())
            .addProducerAttributesExtractors(new ProducerAttribExtractor())
            .addConsumerAttributesExtractors(new ConsumerAttribExtractor())
            .build();
Copy to Clipboard Toggle word wrap

Chapter 19. Using Kafka Exporter
링크 복사

Kafka Exporter is an open source project to enhance monitoring of Apache Kafka brokers and clients.

Kafka Exporter is provided with Streams for Apache Kafka for deployment with a Kafka cluster to extract additional metrics data from Kafka brokers related to offsets, consumer groups, consumer lag, and topics.

The metrics data is used, for example, to help identify slow consumers.

Lag data is exposed as Prometheus metrics, which can then be presented in Grafana for analysis.

If you are already using Prometheus and Grafana for monitoring of built-in Kafka metrics, you can configure Prometheus to also scrape the Kafka Exporter Prometheus endpoint.

Kafka exposes metrics through JMX, which can then be exported as Prometheus metrics. For more information, see Monitoring your cluster using JMX.

19.1. Consumer lag
링크 복사

Consumer lag indicates the difference in the rate of production and consumption of messages. Specifically, consumer lag for a given consumer group indicates the delay between the last message in the partition and the message being currently picked up by that consumer. The lag reflects the position of the consumer offset in relation to the end of the partition log.

This difference is sometimes referred to as the delta between the producer offset and consumer offset, the read and write positions in the Kafka broker topic partitions.

Suppose a topic streams 100 messages a second. A lag of 1000 messages between the producer offset (the topic partition head) and the last offset the consumer has read means a 10-second delay.

The importance of monitoring consumer lag

For applications that rely on the processing of (near) real-time data, it is critical to monitor consumer lag to check that it does not become too big. The greater the lag becomes, the further the process moves from the real-time processing objective.

Consumer lag, for example, might be a result of consuming too much old data that has not been purged, or through unplanned shutdowns.

Reducing consumer lag

Typical actions to reduce lag include:

  • Scaling-up consumer groups by adding new consumers
  • Increasing the retention time for a message to remain in a topic
  • Adding more disk capacity to increase the message buffer

Actions to reduce consumer lag depend on the underlying infrastructure and the use cases Streams for Apache Kafka is supporting. For instance, a lagging consumer is less likely to benefit from the broker being able to service a fetch request from its disk cache. And in certain cases, it might be acceptable to automatically drop messages until a consumer has caught up.

19.2. Kafka Exporter alerting rule examples
링크 복사

The sample alert notification rules specific to Kafka Exporter are as follows:

UnderReplicatedPartition
An alert to warn that a topic is under-replicated and the broker is not replicating enough partitions. The default configuration is for an alert if there are one or more under-replicated partitions for a topic. The alert might signify that a Kafka instance is down or the Kafka cluster is overloaded. A planned restart of the Kafka broker may be required to restart the replication process.
TooLargeConsumerGroupLag
An alert to warn that the lag on a consumer group is too large for a specific topic partition. The default configuration is 1000 records. A large lag might indicate that consumers are too slow and are falling behind the producers.
NoMessageForTooLong
An alert to warn that a topic has not received messages for a period of time. The default configuration for the time period is 10 minutes. The delay might be a result of a configuration issue preventing a producer from publishing messages to the topic.

You can adapt alerting rules according to your specific needs.

19.3. Kafka Exporter metrics
링크 복사

Lag information is exposed by Kafka Exporter as Prometheus metrics for presentation in Grafana.

Kafka Exporter exposes metrics data for brokers, topics, and consumer groups.

Expand
Table 19.1. Broker metrics output
NameInformation

kafka_brokers

Number of brokers in the Kafka cluster

Expand
Table 19.2. Topic metrics output
NameInformation

kafka_topic_partitions

Number of partitions for a topic

kafka_topic_partition_current_offset

Current topic partition offset for a broker

kafka_topic_partition_oldest_offset

Oldest topic partition offset for a broker

kafka_topic_partition_in_sync_replica

Number of in-sync replicas for a topic partition

kafka_topic_partition_leader

Leader broker ID of a topic partition

kafka_topic_partition_leader_is_preferred

Shows 1 if a topic partition is using the preferred broker

kafka_topic_partition_replicas

Number of replicas for this topic partition

kafka_topic_partition_under_replicated_partition

Shows 1 if a topic partition is under-replicated

Expand
Table 19.3. Consumer group metrics output
NameInformation

kafka_consumergroup_current_offset

Current topic partition offset for a consumer group

kafka_consumergroup_lag

Current approximate lag for a consumer group at a topic partition

19.4. Running Kafka Exporter
링크 복사

Run Kafka Exporter to expose Prometheus metrics for presentation in a Grafana dashboard.

Download and install the Kafka Exporter package to use the Kafka Exporter with Streams for Apache Kafka. You need a Streams for Apache Kafka subscription to be able to download and install the package.

Prerequisites

This procedure assumes you already have access to a Grafana user interface and Prometheus is deployed and added as a data source.

Procedure

  1. Install the Kafka Exporter package: 

    dnf install kafka_exporter
    Copy to Clipboard Toggle word wrap

  2. Verify the package has installed: 

    dnf info kafka_exporter
    Copy to Clipboard Toggle word wrap

  3. Run the Kafka Exporter using appropriate configuration parameter values: 

    kafka_exporter --kafka.server=<kafka_bootstrap_address>:9092 --kafka.version=3.9.0 --<my_other_parameters>
    Copy to Clipboard Toggle word wrap

    The parameters require a double-hyphen (--) convention.
    The --kafka.server parameter specifies a hostname and port to connect to a Kafka instance.
    The --kafka.version parameter specifies the Kafka version to ensure compatibility.
    Use kafka_exporter --help for information on other available parameters.

  4. Configure Prometheus to monitor the Kafka Exporter metrics.

    For more information on configuring Prometheus, see the Prometheus documentation.

  5. Enable Grafana to present the Kafka Exporter metrics data exposed by Prometheus.

    For more information, see Presenting Kafka Exporter metrics in Grafana.

Updating Kafka Exporter

Use the latest version of Kafka Exporter with your Streams for Apache Kafka installation.

To check for updates, use: 

dnf check-update
Copy to Clipboard Toggle word wrap

To update Kafka Exporter, use: 

dnf update kafka_exporter
Copy to Clipboard Toggle word wrap

19.5. Presenting Kafka Exporter metrics in Grafana
링크 복사

Using Kafka Exporter Prometheus metrics as a data source, you can create a dashboard of Grafana charts.

For example, from the metrics you can create the following Grafana charts:

  • Message in per second (from topics)
  • Message in per minute (from topics)
  • Lag by consumer group
  • Messages consumed per minute (by consumer groups)

When metrics data has been collected for some time, the Kafka Exporter charts are populated.

Use the Grafana charts to analyze lag and to check if actions to reduce lag are having an impact on an affected consumer group. If, for example, Kafka brokers are adjusted to reduce lag, the dashboard will show the Lag by consumer group chart going down and the Messages consumed per minute chart going up.

Chapter 20. Upgrading Streams for Apache Kafka and Kafka
링크 복사

Upgrade your Kafka cluster with no downtime. Streams for Apache Kafka 2.9 supports and uses Apache Kafka version 3.9.0. Kafka 3.8.0 is supported only for the purpose of upgrading to Streams for Apache Kafka 2.9. You upgrade to the latest supported version of Kafka when you install the latest version of Streams for Apache Kafka.

20.1. Upgrade prerequisites
링크 복사

Before you begin the upgrade process, make sure you are familiar with any upgrade changes described in the Streams for Apache Kafka 2.9 on Red Hat Enterprise Linux Release Notes.

Note

Refer to the documentation supporting a specific version of Streams for Apache Kafka for information on how to upgrade to that version.

20.2. Streams for Apache Kafka upgrade paths
링크 복사

Two upgrade paths are available for Streams for Apache Kafka.

Incremental upgrade
An incremental upgrade involves upgrading Streams for Apache Kafka from the previous minor version to version 2.9.
Multi-version upgrade
A multi-version upgrade involves upgrading an older version of Streams for Apache Kafka to version 2.9 within a single upgrade, skipping one or more intermediate versions. For example, you might wish to upgrade from one LTS version to the next LTS version, slipping intermediate releases.

The upgrade process is the same for either path, you just need to make sure that the inter.broker.protocol.version is switched to the newer version.

20.3. Updating Kafka versions
링크 복사

Upgrading Kafka when using ZooKeeper for cluster management requires updates to the Kafka version (Kafka.spec.kafka.version) and its inter-broker protocol version (inter.broker.protocol.version) in the configuration of the Kafka resource. Each version of Kafka has a compatible version of the inter-broker protocol. The inter-broker protocol is used for inter-broker communication. The minor version of the protocol typically increases to match the minor version of Kafka, as shown in the preceding table. The inter-broker protocol version is set cluster wide in the Kafka resource. To change it, you edit the inter.broker.protocol.version property in Kafka.spec.kafka.config.

The following table shows the differences between Kafka versions:

Expand
Table 20.1. Kafka version differences
Streams for Apache Kafka versionKafka versionInter-broker protocol versionLog message format versionZooKeeper version

2.9

3.9.0

3.9

3.9

3.8.4

2.8

3.8.0

3.8

3.8

3.8.4

  • Kafka 3.9.0 is supported for production use.
  • Kafka 3.8.0 is supported only for the purpose of upgrading to Streams for Apache Kafka 2.9.

Log message format version

When a producer sends a message to a Kafka broker, the message is encoded using a specific format. The format can change between Kafka releases, so messages specify which version of the message format they were encoded with.

The properties used to set a specific message format version are as follows:

  • message.format.version property for topics
  • log.message.format.version property for Kafka brokers

From Kafka 3.0.0, the message format version values are assumed to match the inter.broker.protocol.version and don’t need to be set. The values reflect the Kafka version used.

When upgrading to Kafka 3.0.0 or higher, you can remove these settings when you update the inter.broker.protocol.version. Otherwise, you can set the message format version based on the Kafka version you are upgrading to.

The default value of message.format.version for a topic is defined by the log.message.format.version that is set on the Kafka broker. You can manually set the message.format.version of a topic by modifying its topic configuration.

Rolling updates from Kafka version changes

The Cluster Operator initiates rolling updates to Kafka brokers when the Kafka version is updated. Further rolling updates depend on the configuration for inter.broker.protocol.version and log.message.format.version.

Expand
If Kafka.spec.kafka.config contains…​The Cluster Operator initiates…​

Both the inter.broker.protocol.version and the log.message.format.version.

A single rolling update. After the update, the inter.broker.protocol.version must be updated manually, followed by log.message.format.version. Changing each will trigger a further rolling update.

Either the inter.broker.protocol.version or the log.message.format.version.

Two rolling updates.

No configuration for the inter.broker.protocol.version or the log.message.format.version.

Two rolling updates.

Important

From Kafka 3.0.0, when the inter.broker.protocol.version is set to 3.0 or higher, the log.message.format.version option is ignored and doesn’t need to be set. The log.message.format.version property for brokers and the message.format.version property for topics are deprecated and will be removed in a future release of Kafka.

As part of the Kafka upgrade, the Cluster Operator initiates rolling updates for ZooKeeper.

  • A single rolling update occurs even if the ZooKeeper version is unchanged.
  • Additional rolling updates occur if the new version of Kafka requires a new ZooKeeper version.

20.4. Strategies for upgrading clients
링크 복사

Upgrading Kafka clients ensures that they benefit from the features, fixes, and improvements that are introduced in new versions of Kafka. Upgraded clients maintain compatibility with other upgraded Kafka components. The performance and stability of the clients might also be improved.

Consider the best approach for upgrading Kafka clients and brokers to ensure a smooth transition. The chosen upgrade strategy depends on whether you are upgrading brokers or clients first. Since Kafka 3.0, you can upgrade brokers and client independently and in any order. The decision to upgrade clients or brokers first depends on several factors, such as the number of applications that need to be upgraded and how much downtime is tolerable.

If you upgrade clients before brokers, some new features may not work as they are not yet supported by brokers. However, brokers can handle producers and consumers running with different versions and supporting different log message versions.

20.5. Upgrading Kafka brokers and ZooKeeper
링크 복사

Upgrade Kafka brokers and ZooKeeper on a host machine to use the latest version of Streams for Apache Kafka. You update the installation files, then configure and restart all Kafka brokers to use a new inter-broker protocol version. After performing these steps, data is transmitted between the Kafka brokers using the new inter-broker protocol version. For this setup, Kafka is installed in the /opt/kafka/ directory.

Note

From Kafka 3.0.0, message format version values are assumed to match the inter.broker.protocol.version and don’t need to be set. The values reflect the Kafka version used.

Prerequisites

Procedure

This procedure is divided into two phases:

  • First, you update the Kafka binaries and configure the inter.broker.protocol.version and log.message.format.version to the current Kafka version for each broker.
  • Then, you perform a rolling update of these properties across the cluster to the new Kafka version.

Phase 1: Update Kafka binaries and set protocol versions

For each Kafka broker in your cluster, perform the following steps one at a time. Complete all of these steps for a single broker before moving to the next broker.

  1. Download the Streams for Apache Kafka archive from the Streams for Apache Kafka software downloads page.

    Note

    If prompted, log in to your Red Hat account.

  2. On the command line, create a temporary directory and extract the contents of the amq-streams-<version>-kafka-bin.zip file. 

    mkdir /tmp/kafka
unzip amq-streams-<version>-kafka-bin.zip -d /tmp/kafka
    Copy to Clipboard Toggle word wrap

  3. If running, stop ZooKeeper and the Kafka broker running on the host. 

    ./bin/zookeeper-server-stop.sh
./bin/kafka-server-stop.sh
jcmd | grep zookeeper
jcmd | grep kafka
    Copy to Clipboard Toggle word wrap

    If you are running Kafka on a multi-node cluster, see Section 4.3, “Performing a graceful rolling restart of Kafka brokers”.

  4. Delete the libs and bin directories from your existing installation: 

    rm -rf /opt/kafka/libs /opt/kafka/bin
    Copy to Clipboard Toggle word wrap

  5. Copy the libs and bin directories from the temporary directory: 

    cp -r /tmp/kafka/kafka_<version>/libs /opt/kafka/
cp -r /tmp/kafka/kafka_<version>/bin /opt/kafka/
    Copy to Clipboard Toggle word wrap
  6. If required, update the configuration files in the config directory to reflect any changes in the new versions.

  7. Delete the temporary directory. 

    rm -r /tmp/kafka
    Copy to Clipboard Toggle word wrap

  8. Edit the ./config/server.properties properties file.

    Set the inter.broker.protocol.version and log.message.format.version properties to the current version.

    For example, the current version is 3.8 if upgrading from Kafka version 3.8.0 to 3.9.0: 

    inter.broker.protocol.version=3.8
log.message.format.version=3.8
    Copy to Clipboard Toggle word wrap

    Use the correct version for the Kafka version you are upgrading from (3.7, 3.8, and so on). Leaving the inter.broker.protocol.version unchanged at the current setting ensures that the brokers can continue to communicate with each other throughout the upgrade.

    If the properties are not configured, add them with the current version.

    If you are upgrading from Kafka 3.0.0 or later, you only need to set the inter.broker.protocol.version.

  9. Restart the updated ZooKeeper and Kafka broker: 

    ./bin/zookeeper-server-start.sh -daemon ./config/zookeeper.properties
./bin/kafka-server-start.sh -daemon ./config/server.properties
    Copy to Clipboard Toggle word wrap

    The Kafka broker and ZooKeeper start using the binaries for the latest Kafka version.

    For information on restarting brokers in a multi-node cluster, see Section 4.3, “Performing a graceful rolling restart of Kafka brokers”.

  10. Verify that the restarted Kafka broker has caught up with the partition replicas it is following.

    Use the kafka-topics.sh tool to ensure that all replicas contained in the broker are back in sync. For instructions, see Listing and describing topics.

Phase 2: Update protocol versions to new Kafka version

In the second phase, you update your Kafka brokers to use the new inter-broker protocol version and, if applicable, the new message format version.

Warning

Downgrading Streams for Apache Kafka is not possible after completing the following steps.

  1. Update inter.broker.protocol.version across all brokers.

    For each Kafka broker in your cluster, perform the following steps one at a time. Complete all of these steps for a single broker before moving to the next broker.

    1. Set the inter.broker.protocol.version property to 3.9 in the ./config/server.properties file: 

      inter.broker.protocol.version=3.9
      Copy to Clipboard Toggle word wrap

    2. On the command line, stop the Kafka broker that you modified: 

      ./bin/kafka-server-stop.sh
      Copy to Clipboard Toggle word wrap

    3. Check that Kafka is not running: 

      jcmd | grep kafka
      Copy to Clipboard Toggle word wrap

    4. Restart the Kafka broker that you modified: 

      ./bin/kafka-server-start.sh -daemon ./config/server.properties
      Copy to Clipboard Toggle word wrap

    5. Check that Kafka is running: 

      jcmd | grep kafka
      Copy to Clipboard Toggle word wrap

  2. Update log.message.format.version across all brokers (if applicable).

    If you are upgrading from a version earlier than Kafka 3.0.0, for each Kafka broker in your cluster, perform the following steps one at a time. Complete all of these steps for a single broker before moving to the next broker.

    1. Set the log.message.format.version property to 3.9 in the ./config/server.properties file: 

      log.message.format.version=3.9
      Copy to Clipboard Toggle word wrap

    2. On the command line, stop the Kafka broker that you modified: 

      ./bin/kafka-server-stop.sh
      Copy to Clipboard Toggle word wrap

    3. Check that Kafka is not running: 

      jcmd | grep kafka
      Copy to Clipboard Toggle word wrap

    4. Restart the Kafka broker that you modified: 

      ./bin/kafka-server-start.sh -daemon ./config/server.properties
      Copy to Clipboard Toggle word wrap

    5. Check that Kafka is running: 

      jcmd | grep kafka
      Copy to Clipboard Toggle word wrap

  3. Verify that the restarted Kafka broker has caught up with the partition replicas it is following.

    Use the kafka-topics.sh tool to ensure that all replicas contained in the broker are back in sync. For instructions, see Listing and describing topics.

  4. If it was used in the upgrade, remove the legacy log.message.format.version configuration from the server.properties file.

Example of a 3-node cluster upgrade sequence

Consider a 3-node Kafka cluster. The upgrade sequence (from Kafka version 3.8 to 3.9) for the inter.broker.protocol.version (IBPV) and log.message.format.version (LMFV) properties would be as follows:

Phase 1: Update Kafka binaries and set protocol versions

Update each node sequentially.

  • Node 1: Update binaries to 2.9, set IBPV=3.8, set LMFV=3.8, restart ZooKeeper/Kafka.
  • Node 2: Update binaries to 2.9, set IBPV=3.8, set LMFV=3.8, restart ZooKeeper/Kafka.
  • Node 3: Update binaries to 2.9, set IBPV=3.8, set LMFV=3.8, restart ZooKeeper/Kafka.

Phase 2 (step 1): Update inter.broker.protocol.version across all brokers

  • Node 1: Set IBPV=3.9, restart Kafka.
  • Node 2: Set IBPV=3.9, restart Kafka.
  • Node 3: Set IBPV=3.9, restart Kafka.

Phase 2 (step 2): Update log.message.format.version across all brokers (if applicable)

  • Node 1: Set LMFV=3.9, restart Kafka.
  • Node 2: Set LMFV=3.9, restart Kafka.
  • Node 3: Set LMFV=3.9, restart Kafka.
Note

The steps for updating log.message.format.version (LMFV) are only required when upgrading from a Kafka version earlier than 3.0.0. If you are upgrading from Kafka 3.0.0 or later, LMFV is assumed to match the inter.broker.protocol.version.

Upgrading client applications

Ensure all Kafka client applications are updated to use the new version of the client binaries as part of the upgrade process and verify their compatibility with the Kafka upgrade. If needed, coordinate with the team responsible for managing the client applications.

Tip

To check that a client is using the latest message format, use the kafka.server:type=BrokerTopicMetrics,name={Produce|Fetch}MessageConversionsPerSec metric. The metric shows 0 if the latest message format is being used.

20.6. Upgrading Kafka components
링크 복사

Upgrade Kafka components on a host machine to use the latest version of Streams for Apache Kafka. You can use the Streams for Apache Kafka installation files to upgrade the following components:

  • Kafka Connect
  • MirrorMaker
  • Kafka Bridge (separate ZIP file)

For this setup, Kafka is installed in the /opt/kafka/ directory.

Prerequisites

  • You are logged in to Red Hat Enterprise Linux as the Kafka user.
  • You have downloaded the installation files.

  • You have upgraded Kafka.

    If a Kafka component is running on the same host as Kafka, you’ll also need to stop and start Kafka when upgrading.

Procedure

For each host running an instance of the Kafka component:

  1. Download the Streams for Apache Kafka or Kafka Bridge installation files from the Streams for Apache Kafka software downloads page.

    Note

    If prompted, log in to your Red Hat account.

  2. On the command line, create a temporary directory and extract the contents of the amq-streams-<version>-kafka-bin.zip file. 

    mkdir /tmp/kafka
unzip amq-streams-<version>-kafka-bin.zip -d /tmp/kafka
    Copy to Clipboard Toggle word wrap

    For Kafka Bridge, extract the amq-streams-<version>-bridge-bin.zip file.

  3. If running, stop the Kafka component running on the host.

  4. Delete the libs and bin directories from your existing installation: 

    rm -rf ./libs ./bin
    Copy to Clipboard Toggle word wrap

  5. Copy the libs and bin directories from the temporary directory: 

    cp -r /tmp/kafka/kafka_<version>/libs /opt/kafka/
cp -r /tmp/kafka/kafka_<version>/bin /opt/kafka/
    Copy to Clipboard Toggle word wrap
  6. If required, update the configuration files in the config directory to reflect any changes in the new versions.

  7. Delete the temporary directory. 

    rm -r /tmp/kafka
    Copy to Clipboard Toggle word wrap

  8. Start the Kafka component using the appropriate script and properties files.

    Starting Kafka Connect in standalone mode

    ./bin/connect-standalone.sh \
./config/connect-standalone.properties <connector1>.properties
[<connector2>.properties ...]
    Copy to Clipboard Toggle word wrap

    Starting Kafka Connect in distributed mode

    ./bin/connect-distributed.sh \
./config/connect-distributed.properties
    Copy to Clipboard Toggle word wrap

    Starting MirrorMaker 2 in dedicated mode

    ./bin/connect-mirror-maker.sh \
./config/connect-mirror-maker.properties
    Copy to Clipboard Toggle word wrap

    Starting Kafka Bridge

    ./bin/kafka_bridge_run.sh \
--config-file=<path>/application.properties
    Copy to Clipboard Toggle word wrap

  9. Verify that the Kafka component is running, and producing or consuming data as expected.

    Verifying Kafka Connect in standalone mode is running

    jcmd | grep ConnectStandalone
    Copy to Clipboard Toggle word wrap

    Verifying Kafka Connect in distributed mode is running

    jcmd | grep ConnectDistributed
    Copy to Clipboard Toggle word wrap

    Verifying MirrorMaker 2 in dedicated mode is running

    jcmd | grep mirrorMaker
    Copy to Clipboard Toggle word wrap

    Verifying Kafka Bridge is running by checking the log

    HTTP-Kafka Bridge started and listening on port 8080
HTTP-Kafka Bridge bootstrap servers localhost:9092
    Copy to Clipboard Toggle word wrap

Chapter 21. Monitoring your cluster using JMX
링크 복사

Collecting metrics is critical for understanding the health and performance of your Kafka deployment. By monitoring metrics, you can actively identify issues before they become critical and make informed decisions about resource allocation and capacity planning. Without metrics, you may be left with limited visibility into the behavior of your Kafka deployment, which can make troubleshooting more difficult and time-consuming. Setting up metrics can save you time and resources in the long run, and help ensure the reliability of your Kafka deployment.

Kafka components use Java Management Extensions (JMX) to share management information through metrics. These metrics are crucial for monitoring a Kafka cluster’s performance and overall health. Like many other Java applications, Kafka employs Managed Beans (MBeans) to supply metric data to monitoring tools and dashboards. JMX operates at the JVM level, allowing external tools to connect and retrieve management information from Kafka components. To connect to the JVM, these tools typically need to run on the same machine and with the same user privileges by default.

21.1. Enabling the JMX agent
링크 복사

Enable JMX monitoring of Kafka components using JVM system properties. Use the KAFKA_JMX_OPTS environment variable to set the JMX system properties required for enabling JMX monitoring. The scripts that run the Kafka component use these properties.

Procedure

  1. Set the KAFKA_JMX_OPTS environment variable with the JMX properties for enabling JMX monitoring. 

    export KAFKA_JMX_OPTS=-Dcom.sun.management.jmxremote=true
  -Dcom.sun.management.jmxremote.port=<port>
  -Dcom.sun.management.jmxremote.authenticate=false
  -Dcom.sun.management.jmxremote.ssl=false
    Copy to Clipboard Toggle word wrap

    Replace <port> with the name of the port on which you want the Kafka component to listen for JMX connections.

  2. Add org.apache.kafka.common.metrics.JmxReporter to metric.reporters in the server.properties file. 

    metric.reporters=org.apache.kafka.common.metrics.JmxReporter
    Copy to Clipboard Toggle word wrap
  3. Start the Kafka component using the appropriate script, such as bin/kafka-server-start.sh for a broker or bin/connect-distributed.sh for Kafka Connect.
Important

It is recommended that you configure authentication and SSL to secure a remote JMX connection. For more information about the system properties needed to do this, see the Oracle documentation.

21.2. Disabling the JMX agent
링크 복사

Disable JMX monitoring for Kafka components by updating the KAFKA_JMX_OPTS environment variable.

Procedure

  1. Set the KAFKA_JMX_OPTS environment variable to disable JMX monitoring. 

    export KAFKA_JMX_OPTS=-Dcom.sun.management.jmxremote=false
    Copy to Clipboard Toggle word wrap
    Note

    Other JMX properties, like port, authentication, and SSL properties do not need to be specified when disabling JMX monitoring.

  2. Set auto.include.jmx.reporter to false in the Kafka server.properties file. 

    auto.include.jmx.reporter=false
    Copy to Clipboard Toggle word wrap
    Note

    The auto.include.jmx.reporter property is deprecated. From Kafka 4, the JMXReporter is only enabled if org.apache.kafka.common.metrics.JmxReporter is added to the metric.reporters configuration in the properties file.

  3. Start the Kafka component using the appropriate script, such as bin/kafka-server-start.sh for a broker or bin/connect-distributed.sh for Kafka Connect.

21.3. Metrics naming conventions
링크 복사

When working with Kafka JMX metrics, it’s important to understand the naming conventions used to identify and retrieve specific metrics. Kafka JMX metrics use the following format:

Metrics format

<metric_group>:type=<type_name>,name=<metric_name><other_attribute>=<value>
Copy to Clipboard Toggle word wrap

  • <metric_group> is the name of the metric group
  • <type_name> is the name of the type of metric
  • <metric_name> is the name of the specific metric
  • <other_attribute> represents zero or more additional attributes

For example, the BytesInPerSec metric is a BrokerTopicMetrics type in the kafka.server group: 

kafka.server:type=BrokerTopicMetrics,name=BytesInPerSec
Copy to Clipboard Toggle word wrap

In some cases, metrics may include the ID of an entity. For instance, when monitoring a specific client, the metric format includes the client ID:

Metrics for a specific client

kafka.consumer:type=consumer-fetch-manager-metrics,client-id=<client_id>
Copy to Clipboard Toggle word wrap

Similarly, a metric can be further narrowed down to a specific client and topic:

Metrics for a specific client and topic

kafka.consumer:type=consumer-fetch-manager-metrics,client-id=<client_id>,topic=<topic_id>
Copy to Clipboard Toggle word wrap

Understanding these naming conventions will allow you to accurately specify the metrics you want to monitor and analyze.

Note

To view the full list of available JMX metrics for a Strimzi installation, you can use a graphical tool like JConsole. JConsole is a Java Monitoring and Management Console that allows you to monitor and manage Java applications, including Kafka. By connecting to the JVM running the Kafka component using its process ID, the tool’s user interface allows you to view the list of metrics.

21.4. Analyzing Kafka JMX metrics for troubleshooting
링크 복사

JMX provides a way to gather metrics about Kafka brokers for monitoring and managing their performance and resource usage. By analyzing these metrics, common broker issues such as high CPU usage, memory leaks, thread contention, and slow response times can be diagnosed and resolved. Certain metrics can pinpoint the root cause of these issues.

JMX metrics also provide insights into the overall health and performance of a Kafka cluster. They help monitor the system’s throughput, latency, and availability, diagnose issues, and optimize performance. This section explores the use of JMX metrics to help identify common issues and provides insights into the performance of a Kafka cluster.

Collecting and graphing these metrics using tools like Prometheus and Grafana allows you to visualize the information returned. This can be particularly helpful in detecting issues or optimizing performance. Graphing metrics over time can also help with identifying trends and forecasting resource consumption.

21.4.1. Checking for under-replicated partitions
링크 복사

A balanced Kafka cluster is important for optimal performance. In a balanced cluster, partitions and leaders are evenly distributed across all brokers, and I/O metrics reflect this. As well as using metrics, you can use the kafka-topics.sh tool to get a list of under-replicated partitions and identify the problematic brokers. If the number of under-replicated partitions is fluctuating or many brokers show high request latency, this typically indicates a performance issue in the cluster that requires investigation. On the other hand, a steady (unchanging) number of under-replicated partitions reported by many of the brokers in a cluster normally indicates that one of the brokers in the cluster is offline.

Use the describe --under-replicated-partitions option from the kafka-topics.sh tool to show information about partitions that are currently under-replicated in the cluster. These are the partitions that have fewer replicas than the configured replication factor.

If the output is blank, the Kafka cluster has no under-replicated partitions. Otherwise, the output shows replicas that are not in sync or available.

In the following example, only 2 of the 3 replicas are in sync for each partition, with a replica missing from the ISR (in-sync replica).

Returning information on under-replicated partitions from the command line

bin/kafka-topics.sh --bootstrap-server :9092 --describe --under-replicated-partitions

Topic: topic-1 Partition: 0 Leader: 4 Replicas: 4,2,3 Isr: 4,3
Topic: topic-1 Partition: 1 Leader: 3 Replicas: 2,3,4 Isr: 3,4
Topic: topic-1 Partition: 2 Leader: 3 Replicas: 3,4,2 Isr: 3,4
Copy to Clipboard Toggle word wrap

Here are some metrics to check for I/O and under-replicated partitions:

Metrics to check for under-replicated partitions

kafka.server:type=ReplicaManager,name=PartitionCount
1 

kafka.server:type=ReplicaManager,name=LeaderCount
2 

kafka.server:type=BrokerTopicMetrics,name=BytesInPerSec
3 

kafka.server:type=BrokerTopicMetrics,name=BytesOutPerSec
4 

kafka.server:type=ReplicaManager,name=UnderReplicatedPartitions
5 

kafka.server:type=ReplicaManager,name=UnderMinIsrPartitionCount
6
Copy to Clipboard Toggle word wrap

1
Total number of partitions across all topics in the cluster.
2
Total number of leaders across all topics in the cluster.
3
Rate of incoming bytes per second for each broker.
4
Rate of outgoing bytes per second for each broker.
5
Number of under-replicated partitions across all topics in the cluster.
6
Number of partitions below the minimum ISR.

If topic configuration is set for high availability, with a replication factor of at least 3 for topics and a minimum number of in-sync replicas being 1 less than the replication factor, under-replicated partitions can still be usable. Conversely, partitions below the minimum ISR have reduced availability. You can monitor these using the kafka.server:type=ReplicaManager,name=UnderMinIsrPartitionCount metric and the under-min-isr-partitions option from the kafka-topics.sh tool.

Tip

Use Cruise Control to automate the task of monitoring and rebalancing a Kafka cluster to ensure that the partition load is evenly distributed. For more information, see Chapter 15, Using Cruise Control for cluster rebalancing.

21.4.2. Identifying performance problems in a Kafka cluster
링크 복사

Spikes in cluster metrics may indicate a broker issue, which is often related to slow or failing storage devices or compute restraints from other processes. If there is no issue at the operating system or hardware level, an imbalance in the load of the Kafka cluster is likely, with some partitions receiving disproportionate traffic compared to others in the same Kafka topic.

To anticipate performance problems in a Kafka cluster, it’s useful to monitor the RequestHandlerAvgIdlePercent metric. RequestHandlerAvgIdlePercent provides a good overall indicator of how the cluster is behaving. The value of this metric is between 0 and 1. A value below 0.7 indicates that threads are busy 30% of the time and performance is starting to degrade. If the value drops below 50%, problems are likely to occur, especially if the cluster needs to scale or rebalance. At 30%, a cluster is barely usable.

Another useful metric is kafka.network:type=Processor,name=IdlePercent, which you can use to monitor the extent (as a percentage) to which network processors in a Kafka cluster are idle. The metric helps identify whether the processors are over or underutilized.

To ensure optimal performance, set the num.io.threads property equal to the number of processors in the system, including hyper-threaded processors. If the cluster is balanced, but a single client has changed its request pattern and is causing issues, reduce the load on the cluster or increase the number of brokers.

It’s important to note that a single disk failure on a single broker can severely impact the performance of an entire cluster. Since producer clients connect to all brokers that lead partitions for a topic, and those partitions are evenly spread over the entire cluster, a poorly performing broker will slow down produce requests and cause back pressure in the producers, slowing down requests to all brokers. A RAID (Redundant Array of Inexpensive Disks) storage configuration that combines multiple physical disk drives into a single logical unit can help prevent this issue.

Here are some metrics to check the performance of a Kafka cluster:

Metrics to check the performance of a Kafka cluster

kafka.server:type=KafkaRequestHandlerPool,name=RequestHandlerAvgIdlePercent
1 

# attributes: OneMinuteRate, FifteenMinuteRate
kafka.server:type=socket-server-metrics,listener=([-.\w]+),networkProcessor=([\d]+)
2 

# attributes: connection-creation-rate
kafka.network:type=RequestChannel,name=RequestQueueSize
3 

kafka.network:type=RequestChannel,name=ResponseQueueSize
4 

kafka.network:type=Processor,name=IdlePercent,networkProcessor=([-.\w]+)
5 

kafka.server:type=KafkaServer,name=TotalDiskReadBytes
6 

kafka.server:type=KafkaServer,name=TotalDiskWriteBytes
7
Copy to Clipboard Toggle word wrap

1
Average idle percentage of the request handler threads in the Kafka broker’s thread pool. The OneMinuteRate and FifteenMinuteRate attributes show the request rate of the last one minute and fifteen minutes, respectively.
2
Rate at which new connections are being created on a specific network processor of a specific listener in the Kafka broker. The listener attribute refers to the name of the listener, and the networkProcessor attribute refers to the ID of the network processor. The connection-creation-rate attribute shows the rate of connection creation in connections per second.
3
Current size of the request queue.
4
Current sizes of the response queue.
5
Percentage of time the specified network processor is idle. The networkProcessor specifies the ID of the network processor to monitor.
6
Total number of bytes read from disk by a Kafka server.
7
Total number of bytes written to disk by a Kafka server.

21.4.3. Identifying performance problems with a Kafka controller
링크 복사

The Kafka controller is responsible for managing the overall state of the cluster, such as broker registration, partition reassignment, and topic management. Problems with the controller in the Kafka cluster are difficult to diagnose and often fall into the category of bugs in Kafka itself. Controller issues might manifest as broker metadata being out of sync, offline replicas when the brokers appear to be fine, or actions on topics like topic creation not happening correctly.

There are not many ways to monitor the controller, but you can monitor the active controller count and the controller queue size. Monitoring these metrics gives a high-level indicator if there is a problem. Although spikes in the queue size are expected, if this value continuously increases, or stays steady at a high value and does not drop, it indicates that the controller may be stuck. If you encounter this problem, you can move the controller to a different broker, which requires shutting down the broker that is currently the controller.

Here are some metrics to check the performance of a Kafka controller:

Metrics to check the performance of a Kafka controller

kafka.controller:type=KafkaController,name=ActiveControllerCount
1 

kafka.controller:type=KafkaController,name=OfflinePartitionsCount
2 

kafka.controller:type=ControllerEventManager,name=EventQueueSize
3
Copy to Clipboard Toggle word wrap

1
Number of active controllers in the Kafka cluster. A value of 1 indicates that there is only one active controller, which is the desired state.
2
Number of partitions that are currently offline. If this value is continuously increasing or stays at a high value, there may be a problem with the controller.
3
Size of the event queue in the controller. Events are actions that must be performed by the controller, such as creating a new topic or moving a partition to a new broker. if the value continuously increases or stays at a high value, the controller may be stuck and unable to perform the required actions.

21.4.4. Identifying problems with requests
링크 복사

You can use the RequestHandlerAvgIdlePercent metric to determine if requests are slow. Additionally, request metrics can identify which specific requests are experiencing delays and other issues.

To effectively monitor Kafka requests, it is crucial to collect two key metrics: count and 99th percentile latency, also known as tail latency.

The count metric represents the number of requests processed within a specific time interval. It provides insights into the volume of requests handled by your Kafka cluster and helps identify spikes or drops in traffic.

The 99th percentile latency metric measures the request latency, which is the time taken for a request to be processed. It represents the duration within which 99% of requests are handled. However, it does not provide information about the exact duration for the remaining 1% of requests. In other words, the 99th percentile latency metric tells you that 99% of the requests are handled within a certain duration, and the remaining 1% may take even longer, but the precise duration for this remaining 1% is not known. The choice of the 99th percentile is primarily to focus on the majority of requests and exclude outliers that can skew the results.

This metric is particularly useful for identifying performance issues and bottlenecks related to the majority of requests, but it does not give a complete picture of the maximum latency experienced by a small fraction of requests.

By collecting and analyzing both count and 99th percentile latency metrics, you can gain an understanding of the overall performance and health of your Kafka cluster, as well as the latency of the requests being processed.

Here are some metrics to check the performance of Kafka requests:

Metrics to check the performance of requests

# requests: EndTxn, Fetch, FetchConsumer, FetchFollower, FindCoordinator, Heartbeat, InitProducerId,
# JoinGroup, LeaderAndIsr, LeaveGroup, Metadata, Produce, SyncGroup, UpdateMetadata
1 

kafka.network:type=RequestMetrics,name=RequestsPerSec,request=([\w]+)
2 

kafka.network:type=RequestMetrics,name=RequestQueueTimeMs,request=([\w]+)
3 

kafka.network:type=RequestMetrics,name=TotalTimeMs,request=([\w]+)
4 

kafka.network:type=RequestMetrics,name=LocalTimeMs,request=([\w]+)
5 

kafka.network:type=RequestMetrics,name=RemoteTimeMs,request=([\w]+)
6 

kafka.network:type=RequestMetrics,name=ThrottleTimeMs,request=([\w]+)
7 

kafka.network:type=RequestMetrics,name=ResponseQueueTimeMs,request=([\w]+)
8 

kafka.network:type=RequestMetrics,name=ResponseSendTimeMs,request=([\w]+)
9 

# attributes: Count, 99thPercentile
10
Copy to Clipboard Toggle word wrap

1
Request types to break down the request metrics.
2
Rate at which requests are being processed by the Kafka broker per second.
3
Time (in milliseconds) that a request spends waiting in the broker’s request queue before being processed.
4
Total time (in milliseconds) that a request takes to complete, from the time it is received by the broker to the time the response is sent back to the client.
5
Time (in milliseconds) that a request spends being processed by the broker on the local machine.
6
Time (in milliseconds) that a request spends being processed by other brokers in the cluster.
7
Time (in milliseconds) that a request spends being throttled by the broker. Throttling occurs when the broker determines that a client is sending too many requests too quickly and needs to be slowed down.
8
Time (in milliseconds) that a response spends waiting in the broker’s response queue before being sent back to the client.
9
Time (in milliseconds) that a response takes to be sent back to the client after it has been generated by the broker.
10
For all of the requests metrics, the Count and 99thPercentile attributes show the total number of requests that have been processed and the time it takes for the slowest 1% of requests to complete, respectively.

21.4.5. Using metrics to check the performance of clients
링크 복사

By analyzing client metrics, you can monitor the performance of the Kafka clients (producers and consumers) connected to a broker. This can help identify issues highlighted in broker logs, such as consumers being frequently kicked off their consumer groups, high request failure rates, or frequent disconnections.

Here are some metrics to check the performance of Kafka clients:

Metrics to check the performance of client requests

kafka.consumer:type=consumer-metrics,client-id=([-.\w]+)
1 

# attributes: time-between-poll-avg, time-between-poll-max
kafka.consumer:type=consumer-coordinator-metrics,client-id=([-.\w]+)
2 

# attributes: heartbeat-response-time-max, heartbeat-rate, join-time-max, join-rate, rebalance-rate-per-hour
kafka.producer:type=producer-metrics,client-id=([-.\w]+)
3 

# attributes: buffer-available-bytes, bufferpool-wait-time, request-latency-max, requests-in-flight
# attributes: txn-init-time-ns-total, txn-begin-time-ns-total, txn-send-offsets-time-ns-total, txn-commit-time-ns-total, txn-abort-time-ns-total
# attributes: record-error-total, record-queue-time-avg, record-queue-time-max, record-retry-rate, record-retry-total, record-send-rate, record-send-total
Copy to Clipboard Toggle word wrap

1
(Consumer) Average and maximum time between poll requests, which can help determine if the consumers are polling for messages frequently enough to keep up with the message flow. The time-between-poll-avg and time-between-poll-max attributes show the average and maximum time in milliseconds between successive polls by a consumer, respectively.
2
(Consumer) Metrics to monitor the coordination process between Kafka consumers and the broker coordinator. Attributes relate to the heartbeat, join, and rebalance process.
3
(Producer) Metrics to monitor the performance of Kafka producers. Attributes relate to buffer usage, request latency, in-flight requests, transactional processing, and record handling.

21.4.6. Using metrics to check the performance of topics and partitions
링크 복사

Metrics for topics and partitions can also be helpful in diagnosing issues in a Kafka cluster. You can also use them to debug issues with a specific client when you are unable to collect client metrics.

Here are some metrics to check the performance of a specific topic and partition:

Metrics to check the performance of topics and partitions

#Topic metrics
kafka.server:type=BrokerTopicMetrics,name=BytesInPerSec,topic=([-.\w]+)
1 

kafka.server:type=BrokerTopicMetrics,name=BytesOutPerSec,topic=([-.\w]+)
2 

kafka.server:type=BrokerTopicMetrics,name=FailedFetchRequestsPerSec,topic=([-.\w]+)
3 

kafka.server:type=BrokerTopicMetrics,name=FailedProduceRequestsPerSec,topic=([-.\w]+)
4 

kafka.server:type=BrokerTopicMetrics,name=MessagesInPerSec,topic=([-.\w]+)
5 

kafka.server:type=BrokerTopicMetrics,name=TotalFetchRequestsPerSec,topic=([-.\w]+)
6 

kafka.server:type=BrokerTopicMetrics,name=TotalProduceRequestsPerSec,topic=([-.\w]+)
7 

#Partition metrics
kafka.log:type=Log,name=Size,topic=([-.\w]+),partition=([\d]+))
8 

kafka.log:type=Log,name=NumLogSegments,topic=([-.\w]+),partition=([\d]+))
9 

kafka.log:type=Log,name=LogEndOffset,topic=([-.\w]+),partition=([\d]+))
10 

kafka.log:type=Log,name=LogStartOffset,topic=([-.\w]+),partition=([\d]+))
11
Copy to Clipboard Toggle word wrap

1
Rate of incoming bytes per second for a specific topic.
2
Rate of outgoing bytes per second for a specific topic.
3
Rate of fetch requests that failed per second for a specific topic.
4
Rate of produce requests that failed per second for a specific topic.
5
Incoming message rate per second for a specific topic.
6
Total rate of fetch requests (successful and failed) per second for a specific topic.
7
Total rate of fetch requests (successful and failed) per second for a specific topic.
8
Size of a specific partition’s log in bytes.
9
Number of log segments in a specific partition.
10
Offset of the last message in a specific partition’s log.
11
Offset of the first message in a specific partition’s log

Appendix A. Using your subscription
링크 복사

Streams for Apache Kafka is provided through a software subscription. To manage your subscriptions, access your account at the Red Hat Customer Portal.

Accessing Your Account

  1. Go to access.redhat.com.
  2. If you do not already have an account, create one.
  3. Log in to your account.

Activating a Subscription

  1. Go to access.redhat.com.
  2. Navigate to My Subscriptions.
  3. Navigate to Activate a subscription and enter your 16-digit activation number.

Downloading Zip and Tar Files

To access zip or tar files, use the customer portal to find the relevant files for download. If you are using RPM packages, this step is not required.

  1. Open a browser and log in to the Red Hat Customer Portal Product Downloads page at access.redhat.com/downloads.
  2. Locate the Streams for Apache Kafka for Apache Kafka entries in the INTEGRATION AND AUTOMATION category.
  3. Select the desired Streams for Apache Kafka product. The Software Downloads page opens.
  4. Click the Download link for your component.

Installing packages with DNF

To install a package and all the package dependencies, use: 

dnf install <package_name>
Copy to Clipboard Toggle word wrap

To install a previously-downloaded package from a local directory, use: 

dnf install <path_to_download_package>
Copy to Clipboard Toggle word wrap

Revised on 2025-10-23 15:00:27 UTC

Legal Notice
링크 복사

Copyright © 2025 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat