Red Hat SummitEste conteúdo não está disponível no idioma selecionado.
Chapter 12. Hardware enablement
The following chapters contain the most notable changes to hardware enablement between RHEL 8 and RHEL 9.
12.1. Unmaintained hardware support
The following devices (drivers, adapters) are available but are no longer tested or updated on a routine basis in Red Hat Enterprise Linux 9. Red Hat may fix serious bugs, including security bugs, at its discretion. These devices should no longer be used in production, and it is possible they will be disabled in the next major release.
PCI device IDs are in the format of vendor:device:subvendor:subdevice. If no device ID is listed, all devices associated with the corresponding driver are unmaintained. To check the PCI IDs of the hardware on your system, run the lspci -nn command.
| Device ID | Driver | Device name |
|---|---|---|
| arp_tables | ||
| bnx2 | QLogic BCM5706/5708/5709/5716 Driver | |
| 0x10df:0xe220 | be2net | Emulex Corporation: OneConnect NIC (Lancer) |
| dl2k | ||
| e1000 | Intel® PRO/1000 Network Driver | |
| hpsa | Hewlett-Packard Company: Smart Array Controllers | |
| hdlc_fr | ||
| hfi1 | ||
| ip_set | ||
| ip_tables | ||
| ip6_tables | ||
| 0x10df:0x0724 | lpfc | Emulex Corporation: OneConnect FCoE Initiator (Skyhawk) |
| 0x10df:0xe200 | lpfc | Emulex Corporation: LPe15000/LPe16000 Series 8Gb/16Gb Fibre Channel Adapter |
| 0x10df:0xf011 | lpfc | Emulex Corporation: Saturn: LightPulse Fibre Channel Host Adapter |
| 0x10df:0xf015 | lpfc | Emulex Corporation: Saturn: LightPulse Fibre Channel Host Adapter |
| 0x10df:0xf100 | lpfc | Emulex Corporation: LPe12000 Series 8Gb Fibre Channel Adapter |
| 0x10df:0xfc40 | lpfc | Emulex Corporation: Saturn-X: LightPulse Fibre Channel Host Adapter |
| 0x1000:0x0071 | megaraid_sas | Broadcom / LSI: MR SAS HBA 2004 |
| 0x1000:0x0073 | megaraid_sas | Broadcom / LSI: MegaRAID SAS 2008 [Falcon] |
| 0x1000:0x0079 | megaraid_sas | Broadcom / LSI: MegaRAID SAS 2108 [Liberator] |
| 0x1000:0x005b | megaraid_sas | Broadcom / LSI: MegaRAID SAS 2208 [Thunderbolt] |
| 0x1000:0x006E | mpt3sas | Broadcom / LSI: SAS2308 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0080 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0081 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0082 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0083 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0084 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0085 | mpt3sas | Broadcom / LSI: SAS2208 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0086 | mpt3sas | Broadcom / LSI: SAS2308 PCI-Express Fusion-MPT SAS-2 |
| 0x1000:0x0087 | mpt3sas | Broadcom / LSI: SAS2308 PCI-Express Fusion-MPT SAS-2 |
| mptbase | Fusion MPT SAS Host driver | |
| mptsas | Fusion MPT SAS Host driver | |
| mptscsih | Fusion MPT SCSI Host driver | |
| mptspi | Fusion MPT SAS Host driver | |
| myri10ge | Myricom 10G driver (10GbE) | |
| netxen_nic | QLogic/NetXen (1/10) GbE Intelligent Ethernet Driver | |
| 0x177d:0xa01e | nicpf | Cavium ThunderX NIC PF driver |
| 0x177d:0xa034 | nicvf | Cavium ThunderX NIC VF driver |
| 0x177d:0x0011 | nicvf | Cavium ThunderX NIC VF driver |
| nft_compat | ||
| nvmet-fc | NVMe/Fabrics FC target driver | |
| nvmet-tcp | NVMe/TCP target driver | |
| nfp | ||
| 0x1077:0x2031 | qla2xxx | QLogic Corp.: ISP8324-based 16Gb Fibre Channel to PCI Express Adapter |
| 0x1077:0x2532 | qla2xxx | QLogic Corp.: ISP2532-based 8Gb Fibre Channel to PCI Express HBA |
| 0x1077:0x8031 | qla2xxx | QLogic Corp.: 8300 Series 10GbE Converged Network Adapter (FCoE) |
| qla3xxx | QLogic ISP3XXX Network Driver v2.03.00-k5 | |
| rdma_rxe | ||
| 0x1924:0x0803 | sfc | Solarflare Communications: SFC9020 10G Ethernet Controller |
| 0x1924:0x0813 | sfc | Solarflare Communications: SFL9021 10GBASE-T Ethernet Controller |
| siw | ||
| usnic_verbs | ||
| vmw_pvrdma |
12.2. Removed hardware support
The following devices (drivers, adapters) have been removed from RHEL 9.
PCI device IDs are in the format of vendor:device:subvendor:subdevice. If no device ID is listed, all devices associated with the corresponding driver are unmaintained. To check the PCI IDs of the hardware on your system, run the lspci -nn command.
| Device ID | Driver | Device name |
|---|---|---|
| HNS-RoCE | HNS GE/10GE/25GE/50GE/100GE RDMA Network Controller | |
| liquidio | Cavium LiquidIO Intelligent Server Adapter Driver | |
| liquidio_vf | Cavium LiquidIO Intelligent Server Adapter Virtual Function Driver | |
| aarch64:Ampere:Potenza | Ampere eMAG | |
| aarch64:APM:Potenza | Applied Micro X-Gene | |
| ppc64le:ibm:4d:* | Power8 | |
| ppc64le:ibm:4b:* | Power8E | |
| ppc64le:ibm:4c:* | Power8NVL | |
| s390x:ibm:2964:* | z13 | |
| s390x:ibm:2965:* | z13s | |
| v4l/dvb | television and video capture devices |
