Red Hat SummitEste conteúdo não está disponível no idioma selecionado.
Chapter 4. Starting and Stopping JBoss Fuse
Abstract
Red Hat JBoss Fuse provides simple command-line tools for starting and stopping the server.
4.1. Starting JBoss Fuse
Copiar o linkLink copiado para a área de transferência!
Abstract
The default way for deploying the Red Hat JBoss Fuse runtime is to deploy it as a standalone server with an active console. You can also deploy the runtime as a background process without a console.
Overview
Copiar o linkLink copiado para a área de transferência!
The default way for deploying the Red Hat JBoss Fuse runtime is to deploy it as a standalone server with an active console. You can also deploy the runtime to run as a background process without a console.
Setting up your environment
Copiar o linkLink copiado para a área de transferência!
You can start the JBoss Fuse runtime from the installation directory without doing any work. However, if you want to start it in a different folder you will need to add the
bin directory of your JBoss Fuse installation to the PATH environment variable, as follows:
Windows
set PATH=%PATH%;InstallDir\bin
*NIX
export PATH=$PATH,InstallDir/bin
Launching the runtime
Copiar o linkLink copiado para a área de transferência!
If you are launching the JBoss Fuse runtime from the installation directory use the following command:
Windows
bin\fuse.bat
*NIX
bin/fuse
If JBoss Fuse starts up correctly you should see the following on the console:
_ ____ ______
| | _ \ | ____|
| | |_) | ___ ___ ___ | |__ _ _ ___ ___
_ | | _ / _ \/ __/ __| | __| | | / __|/ _ \
| |__| | |_) | (_) \__ \__ \ | | | |_| \__ \ __/
\____/|____/ \___/|___/___/ |_| \__,_|___/\___|
JBoss Fuse (6.0.0.redhat-xxx)
http://www.redhat.com/products/jbossenterprisemiddleware/fuse/
Hit '<tab>' for a list of available commands
and '[cmd] --help' for help on a specific command.
Hit '<ctrl-d>' or 'osgi:shutdown' to shutdown JBoss Fuse.
JBossFuse:karaf@root>Launching the runtime in server mode
Copiar o linkLink copiado para a área de transferência!
Launching in server mode runs Red Hat JBoss Fuse in the background, without a local console. You would then connect to the running instance using a remote console. See Section 8.2, “ Connecting and Disconnecting Remotely” for details.
To launch JBoss Fuse in server mode, run the following
Windows
bin\start.bat
*NIX
bin/startLaunching the runtime in client mode
Copiar o linkLink copiado para a área de transferência!
In production environments you may want to have a runtime instance accessible using only a local console. In other words, you cannot connect to the runtime remotely. You can do this by launching the runtime in client mode using the following command:
Windows
bin\fuse.bat client
*NIX
bin/fuse client
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}