10.16.4. Substituição de um dispositivo RAID falho em um volume lógico

Procedimento

1. No exemplo a seguir, um volume lógico RAID é apresentado como se segue:

   # lvs --all --options name,copy_percent,devices my_vg
   
     LV               Cpy%Sync Devices
     my_lv            100.00   my_lv_rimage_0(0),my_lv_rimage_1(0),my_lv_rimage_2(0)
     [my_lv_rimage_0]          /dev/sde1(1)
     [my_lv_rimage_1]          /dev/sdc1(1)
     [my_lv_rimage_2]          /dev/sdd1(1)
     [my_lv_rmeta_0]           /dev/sde1(0)
     [my_lv_rmeta_1]           /dev/sdc1(0)
     [my_lv_rmeta_2]           /dev/sdd1(0)

2. Se o dispositivo /dev/sdc falhar, a saída do comando lvs é a seguinte:

   # lvs --all --options name,copy_percent,devices my_vg
   
     /dev/sdc: open failed: No such device or address
     Couldn't find device with uuid A4kRl2-vIzA-uyCb-cci7-bOod-H5tX-IzH4Ee.
     WARNING: Couldn't find all devices for LV my_vg/my_lv_rimage_1 while checking used and assumed devices.
     WARNING: Couldn't find all devices for LV my_vg/my_lv_rmeta_1 while checking used and assumed devices.
     LV               Cpy%Sync Devices
     my_lv            100.00   my_lv_rimage_0(0),my_lv_rimage_1(0),my_lv_rimage_2(0)
     [my_lv_rimage_0]          /dev/sde1(1)
     [my_lv_rimage_1]          [unknown](1)
     [my_lv_rimage_2]          /dev/sdd1(1)
     [my_lv_rmeta_0]           /dev/sde1(0)
     [my_lv_rmeta_1]           [unknown](0)
     [my_lv_rmeta_2]           /dev/sdd1(0)

3. Substitua o dispositivo que falhou e exiba o volume lógico:

   # lvconvert --repair my_vg/my_lv
   
     /dev/sdc: open failed: No such device or address
     Couldn't find device with uuid A4kRl2-vIzA-uyCb-cci7-bOod-H5tX-IzH4Ee.
     WARNING: Couldn't find all devices for LV my_vg/my_lv_rimage_1 while checking used and assumed devices.
     WARNING: Couldn't find all devices for LV my_vg/my_lv_rmeta_1 while checking used and assumed devices.
   Attempt to replace failed RAID images (requires full device resync)? [y/n]: y
     Faulty devices in my_vg/my_lv successfully replaced.

   Opcional: Para especificar manualmente o volume físico que substitui o dispositivo avariado, adicionar o volume físico no final do comando:

   # lvconvert --repare my_vg/my_lv replacement_pv

4. Examine o volume lógico com o substituto:

   # lvs --all --options name,copy_percent,devices my_vg
   
     /dev/sdc: open failed: No such device or address
     /dev/sdc1: open failed: No such device or address
     Couldn't find device with uuid A4kRl2-vIzA-uyCb-cci7-bOod-H5tX-IzH4Ee.
     LV               Cpy%Sync Devices
     my_lv            43.79    my_lv_rimage_0(0),my_lv_rimage_1(0),my_lv_rimage_2(0)
     [my_lv_rimage_0]          /dev/sde1(1)
     [my_lv_rimage_1]          /dev/sdb1(1)
     [my_lv_rimage_2]          /dev/sdd1(1)
     [my_lv_rmeta_0]           /dev/sde1(0)
     [my_lv_rmeta_1]           /dev/sdb1(0)
     [my_lv_rmeta_2]           /dev/sdd1(0)

   Até que você remova o dispositivo defeituoso do grupo de volume, as utilidades da LVM ainda indicam que a LVM não consegue encontrar o dispositivo defeituoso.

5. Remover o dispositivo com defeito do grupo de volume:

   # vgreduce --removemissing VG