此内容没有您所选择的语言版本。

Chapter 21. Persistent Storage Examples

21.1. Overview

The following sections provide detailed, comprehensive instructions on setting up and configuring common storage use cases. These examples cover both the administration of persistent volumes and their security, and how to claim against the volumes as a user of the system.

21.2. Sharing an NFS mount across two persistent volume claims

21.2.1. Overview

The following use case describes how a cluster administrator wanting to leverage shared storage for use by two separate containers would configure the solution. This example highlights the use of NFS, but can easily be adapted to other shared storage types, such as GlusterFS. In addition, this example will show configuration of pod security as it relates to shared storage.

Persistent Storage Using NFS provides an explanation of persistent volumes (PVs), persistent volume claims (PVCs), and using NFS as persistent storage. This topic shows and end-to-end example of using an existing NFS cluster and OpenShift Container Platform persistent store, and assumes an existing NFS server and exports exist in your OpenShift Container Platform infrastructure.

Note

All oc commands are executed on the OpenShift Container Platform master host.

21.2.4. Ensuring NFS Volume Access

Access is necessary to a node in the NFS server. On this node, examine the NFS export mount:

[root@nfs nfs]# ls -lZ /opt/nfs/
total 8
-rw-r--r--. 1 root 100003  system_u:object_r:usr_t:s0     10 Oct 12 23:27 test2b
              1
                     2

1: the owner has ID 0.
2: the group has ID 100003.

In order to access the NFS mount, the container must match the SELinux label, and either run with a UID of 0, or with 100003 in its supplemental groups range. Gain access to the volume by matching the NFS mount’s groups, which will be defined in the pod definition below.

By default, SELinux does not allow writing from a pod to a remote NFS server. To enable writing to NFS volumes with SELinux enforcing on each node, run:

# setsebool -P virt_use_nfs on

21.2.6. Creating an Additional Pod to Reference the Same PVC

This pod definition, created in the same namespace, uses a different container. However, we can use the same backing storage by specifying the claim name in the volumes section below:

Example 21.4. Pod Object Definition

apiVersion: v1
kind: Pod
metadata:
  name: busybox-nfs-pod 1
  labels:
    name: busybox-nfs-pod
spec:
  containers:
  - name: busybox-nfs-pod
    image: busybox 2
    command: ["sleep", "60000"]
    volumeMounts:
    - name: nfsvol-2 3
      mountPath: /usr/share/busybox  4
      readOnly: false
  securityContext:
    supplementalGroups: [100003] 5
    privileged: false
  volumes:
  - name: nfsvol-2
    persistentVolumeClaim:
      claimName: nfs-pvc 6

1: The name of this pod as displayed by oc get pod.
2: The image run by this pod.
3: The name of the volume. This name must be the same in both the containers and volumes sections.
4: The mount path as seen in the container.
5: The group ID to be assigned to the container.
6: The PVC that was created earlier and is also being used by a different container.

Save the pod definition to a file, for example nfs-2.yaml, and create the pod:

# oc create -f nfs-2.yaml
pod "busybox-nfs-pod" created

Verify that the pod was created:

# oc get pods
NAME                READY     STATUS    RESTARTS   AGE
busybox-nfs-pod     1/1       Running   0          3s

More details are shown in the oc describe pod command:

[root@ose70 nfs]# oc describe pod busybox-nfs-pod
Name:				busybox-nfs-pod
Namespace:			default
Image(s):			busybox
Node:				ose70.rh7/192.168.234.148
Start Time:			Mon, 21 Mar 2016 10:19:46 -0400
Labels:				name=busybox-nfs-pod
Status:				Running
Reason:
Message:
IP:				10.1.0.5
Replication Controllers:	<none>
Containers:
  busybox-nfs-pod:
    Container ID:	docker://346d432e5a4824ebf5a47fceb4247e0568ecc64eadcc160e9bab481aecfb0594
    Image:		busybox
    Image ID:		docker://17583c7dd0dae6244203b8029733bdb7d17fccbb2b5d93e2b24cf48b8bfd06e2
    QoS Tier:
      cpu:		BestEffort
      memory:		BestEffort
    State:		Running
      Started:		Mon, 21 Mar 2016 10:19:48 -0400
    Ready:		True
    Restart Count:	0
    Environment Variables:
Conditions:
  Type		Status
  Ready 	True
Volumes:
  nfsvol-2:
    Type:	PersistentVolumeClaim (a reference to a PersistentVolumeClaim in the same namespace)
    ClaimName:	nfs-pvc
    ReadOnly:	false
  default-token-32d2z:
    Type:	Secret (a secret that should populate this volume)
    SecretName:	default-token-32d2z
Events:
  FirstSeen	LastSeen	Count	From			SubobjectPath				Reason		Message
  ─────────	────────	─────	────			─────────────				──────		───────
  4m		4m		1	{scheduler }							Scheduled	Successfully assigned busybox-nfs-pod to ose70.rh7
  4m		4m		1	{kubelet ose70.rh7}	implicitly required container POD	Pulled		Container image "openshift3/ose-pod:v3.1.0.4" already present on machine
  4m		4m		1	{kubelet ose70.rh7}	implicitly required container POD	Created		Created with docker id 249b7d7519b1
  4m		4m		1	{kubelet ose70.rh7}	implicitly required container POD	Started		Started with docker id 249b7d7519b1
  4m		4m		1	{kubelet ose70.rh7}	spec.containers{busybox-nfs-pod}	Pulled		Container image "busybox" already present on machine
  4m		4m		1	{kubelet ose70.rh7}	spec.containers{busybox-nfs-pod}	Created		Created with docker id 346d432e5a48
  4m		4m		1	{kubelet ose70.rh7}	spec.containers{busybox-nfs-pod}	Started		Started with docker id 346d432e5a48

As you can see, both containers are using the same storage claim that is attached to the same NFS mount on the back end.

21.3. Complete Example Using Ceph RBD

21.3.1. Overview

This topic provides an end-to-end example of using an existing Ceph cluster as an OpenShift Container Platform persistent store. It is assumed that a working Ceph cluster is already set up. If not, consult the Overview of Red Hat Ceph Storage.

Persistent Storage Using Ceph Rados Block Device provides an explanation of persistent volumes (PVs), persistent volume claims (PVCs), and using Ceph RBD as persistent storage.

Note

All oc … commands are executed on the OpenShift Container Platform master host.

21.3.2. Installing the ceph-common Package

The ceph-common library must be installed on all schedulable OpenShift Container Platform nodes:

Note

The OpenShift Container Platform all-in-one host is not often used to run pod workloads and, thus, is not included as a schedulable node.

# yum install -y ceph-common

21.3.3. Creating the Ceph Secret

The ceph auth get-key command is run on a Ceph MON node to display the key value for the client.admin user:

Example 21.5. Ceph Secret Definition

apiVersion: v1
kind: Secret
metadata:
  name: ceph-secret
data:
  key: QVFBOFF2SlZheUJQRVJBQWgvS2cwT1laQUhPQno3akZwekxxdGc9PQ== 1

1: This base64 key is generated on one of the Ceph MON nodes using the ceph auth get-key client.admin | base64 command, then copying the output and pasting it as the secret key’s value.

Save the secret definition to a file, for example ceph-secret.yaml, then create the secret:

$ oc create -f ceph-secret.yaml
secret "ceph-secret" created

Verify that the secret was created:

# oc get secret ceph-secret
NAME          TYPE      DATA      AGE
ceph-secret   Opaque    1         23d

21.3.4. Creating the Persistent Volume

Next, before creating the PV object in OpenShift Container Platform, define the persistent volume file:

Example 21.6. Persistent Volume Object Definition Using Ceph RBD

apiVersion: v1
kind: PersistentVolume
metadata:
  name: ceph-pv     1
spec:
  capacity:
    storage: 2Gi    2
  accessModes:
    - ReadWriteOnce 3
  rbd:              4
    monitors:       5
      - 192.168.122.133:6789
    pool: rbd
    image: ceph-image
    user: admin
    secretRef:
      name: ceph-secret 6
    fsType: ext4        7
    readOnly: false
  persistentVolumeReclaimPolicy: Recycle

1: The name of the PV, which is referenced in pod definitions or displayed in various oc volume commands.
2: The amount of storage allocated to this volume.
3: accessModes are used as labels to match a PV and a PVC. They currently do not define any form of access control. All block storage is defined to be single user (non-shared storage).
4: This defines the volume type being used. In this case, the rbd plug-in is defined.
5: This is an array of Ceph monitor IP addresses and ports.
6: This is the Ceph secret, defined above. It is used to create a secure connection from OpenShift Container Platform to the Ceph server.
7: This is the file system type mounted on the Ceph RBD block device.

Save the PV definition to a file, for example ceph-pv.yaml, and create the persistent volume:

# oc create -f ceph-pv.yaml
persistentvolume "ceph-pv" created

Verify that the persistent volume was created:

# oc get pv
NAME                     LABELS    CAPACITY     ACCESSMODES   STATUS      CLAIM     REASON    AGE
ceph-pv                  <none>    2147483648   RWO           Available                       2s

21.3.5. Creating the Persistent Volume Claim

A persistent volume claim (PVC) specifies the desired access mode and storage capacity. Currently, based on only these two attributes, a PVC is bound to a single PV. Once a PV is bound to a PVC, that PV is essentially tied to the PVC’s project and cannot be bound to by another PVC. There is a one-to-one mapping of PVs and PVCs. However, multiple pods in the same project can use the same PVC.

Example 21.7. PVC Object Definition

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: ceph-claim
spec:
  accessModes:     1
    - ReadWriteOnce
  resources:
    requests:
      storage: 2Gi 2

1: As mentioned above for PVs, the accessModes do not enforce access right, but rather act as labels to match a PV to a PVC.
2: This claim will look for PVs offering 2Gi or greater capacity.

Save the PVC definition to a file, for example ceph-claim.yaml, and create the PVC:

# oc create -f ceph-claim.yaml
persistentvolumeclaim "ceph-claim" created

#and verify the PVC was created and bound to the expected PV:
# oc get pvc
NAME         LABELS    STATUS    VOLUME    CAPACITY   ACCESSMODES   AGE
ceph-claim   <none>    Bound     ceph-pv   1Gi        RWX           21s
                                 1

1: the claim was bound to the ceph-pv PV.

21.3.6. Creating the Pod

A pod definition file or a template file can be used to define a pod. Below is a pod specification that creates a single container and mounts the Ceph RBD volume for read-write access:

Example 21.8. Pod Object Definition

apiVersion: v1
kind: Pod
metadata:
  name: ceph-pod1           1
spec:
  containers:
  - name: ceph-busybox
    image: busybox          2
    command: ["sleep", "60000"]
    volumeMounts:
    - name: ceph-vol1       3
      mountPath: /usr/share/busybox 4
      readOnly: false
  volumes:
  - name: ceph-vol1         5
    persistentVolumeClaim:
      claimName: ceph-claim 6

1: The name of this pod as displayed by oc get pod.
2: The image run by this pod. In this case, we are telling busybox to sleep.
3 5: The name of the volume. This name must be the same in both the containers and volumes sections.
4: The mount path as seen in the container.
6: The PVC that is bound to the Ceph RBD cluster.

Save the pod definition to a file, for example ceph-pod1.yaml, and create the pod:

# oc create -f ceph-pod1.yaml
pod "ceph-pod1" created

#verify pod was created
# oc get pod
NAME        READY     STATUS    RESTARTS   AGE
ceph-pod1   1/1       Running   0          2m
                      1

1: After a minute or so, the pod will be in the Running state.

21.3.7. Defining Group and Owner IDs (Optional)

When using block storage, such as Ceph RBD, the physical block storage is managed by the pod. The group ID defined in the pod becomes the group ID of both the Ceph RBD mount inside the container, and the group ID of the actual storage itself. Thus, it is usually unnecessary to define a group ID in the pod specifiation. However, if a group ID is desired, it can be defined using fsGroup, as shown in the following pod definition fragment:

Example 21.9. Group ID Pod Definition

...
spec:
  containers:
    - name:
    ...
  securityContext: 1
    fsGroup: 7777  2
...

1: securityContext must be defined at the pod level, not under a specific container.
2: All containers in the pod will have the same fsGroup ID.

21.4. Complete Example Using GlusterFS

21.4.1. Overview

This topic provides an end-to-end example of how to use an existing Gluster cluster as an OpenShift Container Platform persistent store. It is assumed that a working Gluster cluster is already set up. If not, consult the Red Hat Gluster Storage Administration Guide.

Persistent Storage Using GlusterFS provides an explanation of persistent volumes (PVs), persistent volume claims (PVCs), and using GlusterFS as persistent storage.

Note

All oc … commands are executed on the OpenShift Container Platform master host.

21.4.2. Installing the glusterfs-fuse Package

The glusterfs-fuse library must be installed on all schedulable OpenShift Container Platform nodes:

# yum install -y glusterfs-fuse

Note

The OpenShift Container Platform all-in-one host is often not used to run pod workloads and, thus, is not included as a schedulable node.

21.4.3. Creating the Gluster Endpoints and Gluster Service for Persistence

The named endpoints define each node in the Gluster-trusted storage pool:

Example 21.10. GlusterFS Endpoint Definition

apiVersion: v1
kind: Endpoints
metadata:
  name: gluster-cluster 1
subsets:
- addresses:              2
  - ip: 192.168.122.21
  ports:                  3
  - port: 1
    protocol: TCP
- addresses:
  - ip: 192.168.122.22
  ports:
  - port: 1
    protocol: TCP

1: The endpoints name. If using a service, then the endpoints name must match the service name.
2: An array of IP addresses for each node in the Gluster pool. Currently, host names are not supported.
3: The port numbers are ignored, but must be legal port numbers. The value 1 is commonly used.

Save the endpoints definition to a file, for example gluster-endpoints.yaml, then create the endpoints object:

# oc create -f gluster-endpoints.yaml
endpoints "gluster-cluster" created

Verify that the endpoints were created:

# oc get endpoints gluster-cluster
NAME                ENDPOINTS                           AGE
gluster-cluster     192.168.122.21:1,192.168.122.22:1   1m

Note

To persist the Gluster endpoints, you also need to create a service.

Note

Endpoints are name-spaced. Each project accessing the Gluster volume needs its own endpoints.

Example 21.11. GlusterFS Service Definition

apiVersion: v1
kind: Service
metadata:
  name: gluster-cluster 1
spec:
  ports:
  - port: 1 2

1: The name of the service. If using a service, then the endpoints name must match the service name.
2: The port should match the same port used in the endpoints.

Save the service definition to a file, for example gluster-service.yaml, then create the endpoints object:

# oc create -f gluster-service.yaml
endpoints "gluster-cluster" created

Verify that the service was created:

# oc get service gluster-cluster
NAME                CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
gluster-cluster     10.0.0.130   <none>        1/TCP     9s

21.4.4. Creating the Persistent Volume

Next, before creating the PV object, define the persistent volume in OpenShift Container Platform:

Persistent Volume Object Definition Using GlusterFS

apiVersion: v1
kind: PersistentVolume
metadata:
  name: gluster-pv   1
spec:
  capacity:
    storage: 1Gi     2
  accessModes:
  - ReadWriteMany    3
  glusterfs:         4
    endpoints: gluster-cluster 5
    path: /HadoopVol 6
    readOnly: false
  persistentVolumeReclaimPolicy: Retain 7

1: The name of the PV, which is referenced in pod definitions or displayed in various oc volume commands.
2: The amount of storage allocated to this volume.
3: accessModes are used as labels to match a PV and a PVC. They currently do not define any form of access control.
4: This defines the volume type being used. In this case, the glusterfs plug-in is defined.
5: This references the endpoints named above.
6: This is the Gluster volume name, preceded by /.
7: The volume reclaim policy Retain indicates that the volume will be preserved after the pods accessing it terminates. For GlusterFS, the accepted values include Retain, and Delete.

Save the PV definition to a file, for example gluster-pv.yaml, and create the persistent volume:

# oc create -f gluster-pv.yaml
persistentvolume "gluster-pv" created

Verify that the persistent volume was created:

# oc get pv
NAME         LABELS    CAPACITY   ACCESSMODES   STATUS      CLAIM     REASON    AGE
gluster-pv   <none>    1Gi        RWX           Available                       37s

21.4.5. Creating the Persistent Volume Claim

Example 21.12. PVC Object Definition

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: gluster-claim  1
spec:
  accessModes:
  - ReadWriteMany      2
  resources:
     requests:
       storage: 1Gi    3

1: The claim name is referenced by the pod under its volumes section.
2: As mentioned above for PVs, the accessModes do not enforce access rights, but rather act as labels to match a PV to a PVC.
3: This claim will look for PVs offering 1Gi or greater capacity.

Save the PVC definition to a file, for example gluster-claim.yaml, and create the PVC:

# oc create -f gluster-claim.yaml
persistentvolumeclaim "gluster-claim" created

Verify the PVC was created and bound to the expected PV:

# oc get pvc
NAME            LABELS    STATUS    VOLUME       CAPACITY   ACCESSMODES   AGE
gluster-claim   <none>    Bound     gluster-pv   1Gi        RWX           24s
                                    1

1: The claim was bound to the gluster-pv PV.

21.4.6. Defining GlusterFS Volume Access

Access is necessary to a node in the Gluster-trusted storage pool. On this node, examine the glusterfs-fuse mount:

# ls -lZ /mnt/glusterfs/
drwxrwx---. yarn hadoop system_u:object_r:fusefs_t:s0    HadoopVol

# id yarn
uid=592(yarn) gid=590(hadoop) groups=590(hadoop)
    1
                  2

1: The owner has ID 592.
2: The group has ID 590.

In order to access the HadoopVol volume, the container must match the SELinux label, and either run with a UID of 592, or with 590 in its supplemental groups. It is recommended to gain access to the volume by matching the Gluster mount’s groups, which is defined in the pod definition below.

By default, SELinux does not allow writing from a pod to a remote Gluster server. To enable writing to GlusterFS volumes with SELinux enforcing on each node, run:

# setsebool -P virt_sandbox_use_fusefs on

Note

The virt_sandbox_use_fusefs boolean is defined by the docker-selinux package. If you get an error saying it is not defined, ensure that this package is installed.

21.4.7. Creating the Pod using NGINX Web Server image

A pod definition file or a template file can be used to define a pod. Below is a pod specification that creates a single container and mounts the Gluster volume for read-write access:

Note

The NGINX image may require to run in privileged mode to create the mount and run properly. An easy way to accomplish this is to simply add your user to the privileged Security Context Constraint (SCC):

$ oadm policy add-scc-to-user privileged myuser

Then, add the privileged: true to the containers securityContext: section of the YAML file (as seen in the example below).

Managing Security Context Constraints provides additional information regarding SCCs.

Example 21.13. Pod Object Definition using NGINX image

apiVersion: v1
kind: Pod
metadata:
  name: gluster-pod1
  labels:
    name: gluster-pod1   1
spec:
  containers:
  - name: gluster-pod1
    image: nginx       2
    ports:
    - name: web
      containerPort: 80
    securityContext:
      privileged: true
    volumeMounts:
    - name: gluster-vol1 3
      mountPath: /usr/share/nginx/html 4
      readOnly: false
  securityContext:
    supplementalGroups: [590]       5
  volumes:
  - name: gluster-vol1   6
    persistentVolumeClaim:
      claimName: gluster-claim      7

1: The name of this pod as displayed by oc get pod.
2: The image run by this pod. In this case, we are using a standard NGINX image.
3 6: The name of the volume. This name must be the same in both the containers and volumes sections.
4: The mount path as seen in the container.
5: The SupplementalGroup ID (Linux Groups) to be assigned at the pod level and as discussed this should match the POSIX permissions on the Gluster volume.
7: The PVC that is bound to the Gluster cluster.

Save the pod definition to a file, for example gluster-pod1.yaml, and create the pod:

# oc create -f gluster-pod1.yaml
pod "gluster-pod1" created

Verify the pod was created:

# oc get pod
NAME           READY     STATUS    RESTARTS   AGE
gluster-pod1   1/1       Running   0          31s

                         1

1: After a minute or so, the pod will be in the Running state.

More details are shown in the oc describe pod command:

# oc describe pod gluster-pod1
Name:			gluster-pod1
Namespace:		default  1
Security Policy:	privileged
Node:			ose1.rhs/192.168.122.251
Start Time:		Wed, 24 Aug 2016 12:37:45 -0400
Labels:			name=gluster-pod1
Status:			Running
IP:			172.17.0.2  2
Controllers:		<none>
Containers:
  gluster-pod1:
    Container ID:	docker://e67ed01729e1dc7369c5112d07531a27a7a02a7eb942f17d1c5fce32d8c31a2d
    Image:		nginx
    Image ID:		docker://sha256:4efb2fcdb1ab05fb03c9435234343c1cc65289eeb016be86193e88d3a5d84f6b
    Port:		80/TCP
    State:		Running
      Started:		Wed, 24 Aug 2016 12:37:52 -0400
    Ready:		True
    Restart Count:	0
    Volume Mounts:
      /usr/share/nginx/html/test from glustervol (rw)
      /var/run/secrets/kubernetes.io/serviceaccount from default-token-1n70u (ro)
    Environment Variables:	<none>
Conditions:
  Type		Status
  Initialized 	True
  Ready 	True
  PodScheduled 	True
Volumes:
  glustervol:
    Type:	PersistentVolumeClaim (a reference to a PersistentVolumeClaim in the same namespace)
    ClaimName:	gluster-claim  3
    ReadOnly:	false
  default-token-1n70u:
    Type:	Secret (a volume populated by a Secret)
    SecretName:	default-token-1n70u
QoS Tier:	BestEffort
Events:    4
  FirstSeen	LastSeen	Count	From			SubobjectPath			Type		Reason		Message
  ---------	--------	-----	----			-------------			--------	------		-------
  10s		10s		1	{default-scheduler }					Normal		Scheduled	Successfully assigned gluster-pod1 to ose1.rhs
  9s		9s		1	{kubelet ose1.rhs}	spec.containers{gluster-pod1}	Normal		Pulling		pulling image "nginx"
  4s		4s		1	{kubelet ose1.rhs}	spec.containers{gluster-pod1}	Normal		Pulled		Successfully pulled image "nginx"
  3s		3s		1	{kubelet ose1.rhs}	spec.containers{gluster-pod1}	Normal		Created		Created container with docker id e67ed01729e1
  3s		3s		1	{kubelet ose1.rhs}	spec.containers{gluster-pod1}	Normal		Started		Started container with docker id e67ed01729e1

1: The project (namespace) name.
2: The IP address of the OpenShift Container Platform node running the pod.
3: The PVC name used by the pod.
4: The list of events resulting in the pod being launched and the Gluster volume being mounted.

There is more internal information, including the SCC used to authorize the pod, the pod’s user and group IDs, the ⁠SELinux label, and more shown in the oc get pod <name> -o yaml command:

# oc get pod gluster-pod1 -o yaml
apiVersion: v1
kind: Pod
metadata:
  annotations:
    openshift.io/scc: privileged  1
  creationTimestamp: 2016-08-24T16:37:45Z
  labels:
    name: gluster-pod1
  name: gluster-pod1
  namespace: default  2
  resourceVersion: "482"
  selfLink: /api/v1/namespaces/default/pods/gluster-pod1
  uid: 15afda77-6a19-11e6-aadb-525400f7256d
spec:
  containers:
  - image: nginx
    imagePullPolicy: Always
    name: gluster-pod1
    ports:
    - containerPort: 80
      name: web
      protocol: TCP
    resources: {}
    securityContext:
      privileged: true  3
    terminationMessagePath: /dev/termination-log
    volumeMounts:
    - mountPath: /usr/share/nginx/html
      name: glustervol
    - mountPath: /var/run/secrets/kubernetes.io/serviceaccount
      name: default-token-1n70u
      readOnly: true
  dnsPolicy: ClusterFirst
  host: ose1.rhs
  imagePullSecrets:
  - name: default-dockercfg-20xg9
  nodeName: ose1.rhs
  restartPolicy: Always
  securityContext:
    supplementalGroups:
    - 590   4
  serviceAccount: default
  serviceAccountName: default
  terminationGracePeriodSeconds: 30
  volumes:
  - name: glustervol
    persistentVolumeClaim:
      claimName: gluster-claim  5
  - name: default-token-1n70u
    secret:
      secretName: default-token-1n70u
status:
  conditions:
  - lastProbeTime: null
    lastTransitionTime: 2016-08-24T16:37:45Z
    status: "True"
    type: Initialized
  - lastProbeTime: null
    lastTransitionTime: 2016-08-24T16:37:53Z
    status: "True"
    type: Ready
  - lastProbeTime: null
    lastTransitionTime: 2016-08-24T16:37:45Z
    status: "True"
    type: PodScheduled
  containerStatuses:
  - containerID: docker://e67ed01729e1dc7369c5112d07531a27a7a02a7eb942f17d1c5fce32d8c31a2d
    image: nginx
    imageID: docker://sha256:4efb2fcdb1ab05fb03c9435234343c1cc65289eeb016be86193e88d3a5d84f6b
    lastState: {}
    name: gluster-pod1
    ready: true
    restartCount: 0
    state:
      running:
        startedAt: 2016-08-24T16:37:52Z
  hostIP: 192.168.122.251
  phase: Running
  podIP: 172.17.0.2
  startTime: 2016-08-24T16:37:45Z

1: The SCC used by the pod.
2: The project (namespace) name.
3: The security context level requested, in this case privileged
4: The supplemental group ID for the pod (all containers).
5: The PVC name used by the pod.

21.5. Backing Docker Registry with GlusterFS Storage

21.5.1. Overview

This topic reviews how to attach a GlusterFS persistent volume to the Docker Registry.

It is assumed that the Docker registry service has already been started and the Gluster volume has been created.

21.5.2. Prerequisites

The docker-registry was deployed without configuring storage.
A Gluster volume exists and glusterfs-fuse is installed on schedulable nodes.
Definitions written for GlusterFS endpoints and service, persistent volume (PV), and persistent volume claim (PVC).
- For this guide, these will be:
  - gluster-endpoints-service.yaml
  - gluster-endpoints.yaml
  - gluster-pv.yaml
  - gluster-pvc.yaml
A user with the cluster-admin role binding.
- For this guide, that user is admin.

Note

All oc commands are executed on the master node as the admin user.

21.5.3. Create the Gluster Persistent Volume

First, make the Gluster volume available to the registry.

$ oc create -f gluster-endpoints-service.yaml
$ oc create -f gluster-endpoints.yaml
$ oc create -f gluster-pv.yaml
$ oc create -f gluster-pvc.yaml

Check to make sure the PV and PVC were created and bound successfully. The expected output should resemble the following. Note that the PVC status is Bound, indicating that it has bound to the PV.

$ oc get pv
NAME         LABELS    CAPACITY   ACCESSMODES   STATUS      CLAIM     REASON    AGE
gluster-pv   <none>    1Gi        RWX           Available                       37s
$ oc get pvc
NAME            LABELS    STATUS    VOLUME       CAPACITY   ACCESSMODES   AGE
gluster-claim   <none>    Bound     gluster-pv   1Gi        RWX           24s

Note

If either the PVC or PV failed to create or the PVC failed to bind, refer back to the GlusterFS Persistent Storage guide. Do not proceed until they initialize and the PVC status is Bound.

21.5.4. Attach the PVC to the Docker Registry

Before moving forward, ensure that the docker-registry service is running.

$ oc get svc
NAME              CLUSTER_IP       EXTERNAL_IP   PORT(S)                 SELECTOR                  AGE
docker-registry   172.30.167.194   <none>        5000/TCP                docker-registry=default   18m

Note

If either the docker-registry service or its associated pod is not running, refer back to the docker-registry setup instructions for troubleshooting before continuing.

Then, attach the PVC:

$ oc volume deploymentconfigs/docker-registry --add --name=registry-storage -t pvc \
     --claim-name=gluster-claim --overwrite

Deploying a Docker Registry provides more information on using the Docker registry.

21.5.5. Known Issues

21.5.5.1. Pod Cannot Resolve the Volume Host

In non-production cases where the dnsmasq server is located on the same node as the OpenShift Container Platform master service, pods might not resolve to the host machines when mounting the volume, causing errors in the docker-registry-1-deploy pod. This can happen when dnsmasq.service fails to start because of a collision with OpenShift Container Platform DNS on port 53. To run the DNS server on the master host, some configurations needs to be changed.

In /etc/dnsmasq.conf, add:

# Reverse DNS record for master
host-record=master.example.com,<master-IP>
# Wildcard DNS for OpenShift Applications - Points to Router
address=/apps.example.com/<master-IP>
# Forward .local queries to SkyDNS
server=/local/127.0.0.1#8053
# Forward reverse queries for service network to SkyDNS.
# This is for default OpenShift SDN - change as needed.
server=/17.30.172.in-addr.arpa/127.0.0.1#8053

With these settings, dnsmasq will pull from the /etc/hosts file on the master node.

Add the appropriate host names and IPs for all necessary hosts.

In master-config.yaml, change bindAddress to:

dnsConfig:
 bindAddress: 127.0.0.1:8053

When pods are created, they receive a copy of /etc/resolv.conf, which typically contains only the master DNS server so they can resolve external DNS requests. To enable internal DNS resolution, insert the dnsmasq server at the top of the server list. This way, dnsmasq will attempt to resolve requests internally first.

In /etc/resolv.conf all scheduled nodes:

nameserver 192.168.1.100  1
nameserver 192.168.1.1    2

1: Add the internal DNS server.
2: Pre-existing external DNS server.

Once the configurations are changed, restart the OpenShift Container Platform master and dnsmasq services.

$ systemctl restart atomic-openshift-master
$ systemctl restart dnsmasq

21.6. Binding Persistent Volumes by Labels

21.6.1. Overview

This topic provides an end-to-end example for binding persistent volume claims (PVCs) to persistent volumes (PVs), by defining labels in the PV and matching selectors in the PVC. This feature is available for all storage options. It is assumed that a OpenShift Container Platform cluster contains persistent storage resources which are available for binding by PVCs.

A Note on Labels and Selectors

Labels are an OpenShift Container Platform feature that support user-defined tags (key-value pairs) as part of an object’s specification. Their primary purpose is to enable the arbitrary grouping of objects by defining identical labels among them. These labels can then be targeted by selectors to match all objects with specified label values. It is this functionality we will take advantage of to enable our PVC to bind to our PV. For a more in-depth look at labels, see Pods and Services.

Note

For this example, we will be using modified GlusterFS PV and PVC specifications. However, implementation of selectors and labels is generic across for all storage options. See the relevant storage option for your volume provider to learn more about its unique configuration.

21.6.1.1. Assumptions

It is assumed that you have:

An existing OpenShift Container Platform cluster with at least one master and one node
At least one supported storage volume
A user with cluster-admin privileges

21.6.2. Defining Specifications

Note

These specifications are tailored to GlusterFS. Consult the relevant storage option for your volume provider to learn more about its unique configuration.

21.6.2.1. Persistent Volume with Labels

Example 21.14. glusterfs-pv.yaml

apiVersion: v1
kind: PersistentVolume
metadata:
  name: gluster-volume
  labels: 1
    storage-tier: gold
    aws-availability-zone: us-east-1
spec:
  capacity:
    storage: 2Gi
  accessModes:
    - ReadWriteMany
  glusterfs:
    endpoints: glusterfs-cluster 2
    path: myVol1
    readOnly: false
  persistentVolumeReclaimPolicy: Retain

1: Use labels to identify common attributes or characteristics shared among volumes. In this case, we defined the Gluster volume to have a custom attribute (key) named storage-tier with a value of gold assigned. A claim will be able to select a PV with storage-tier=gold to match this PV.
2: Endpoints define the Gluster trusted pool and are discussed below.

21.6.2.2. Persistent Volume Claim with Selectors

A claim with a selector stanza (see example below) attempts to match existing, unclaimed, and non-prebound PVs. The existence of a PVC selector ignores a PV’s capacity. However, accessModes are still considered in the matching criteria.

It is important to note that a claim must match all of the key-value pairs included in its selector stanza. If no PV matches the claim, then the PVC will remain unbound (Pending). A PV can subsequently be created and the claim will automatically check for a label match.

Example 21.15. glusterfs-pvc.yaml

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: gluster-claim
spec:
  accessModes:
  - ReadWriteMany
  resources:
     requests:
       storage: 1Gi
  selector: 1
    matchLabels:
      storage-tier: gold
      aws-availability-zone: us-east-1

1: The selector stanza defines all labels necessary in a PV in order to match this claim.

21.6.2.3. Volume Endpoints

To attach the PV to the Gluster volume, endpoints should be configured before creating our objects.

Example 21.16. glusterfs-ep.yaml

  apiVersion: v1
  kind: Endpoints
  metadata:
    name: glusterfs-cluster
  subsets:
    - addresses:
        - ip: 192.168.122.221
      ports:
        - port: 1
    - addresses:
        - ip: 192.168.122.222
      ports:
        - port: 1

21.6.2.4. Deploy the PV, PVC, and Endpoints

For this example, run the oc commands as a cluster-admin privileged user. In a production environment, cluster clients might be expected to define and create the PVC.

# oc create -f glusterfs-ep.yaml
endpoints "glusterfs-cluster" created
# oc create -f glusterfs-pv.yaml
persistentvolume "gluster-volume" created
# oc create -f glusterfs-pvc.yaml
persistentvolumeclaim "gluster-claim" created

Lastly, confirm that the PV and PVC bound successfully.

# oc get pv,pvc
NAME              CAPACITY   ACCESSMODES      STATUS     CLAIM                     REASON    AGE
gluster-volume    2Gi        RWX              Bound      gfs-trial/gluster-claim             7s
NAME              STATUS     VOLUME           CAPACITY   ACCESSMODES               AGE
gluster-claim     Bound      gluster-volume   2Gi        RWX                       7s

Note

PVCs are local to a project, whereas PVs are a cluster-wide, global resource. Developers and non-administrator users may not have access to see all (or any) of the available PVs.

此内容没有您所选择的语言版本。

Chapter 21. Persistent Storage Examples

21.1. Overview

21.2. Sharing an NFS mount across two persistent volume claims

21.2.1. Overview

21.2.2. Creating the Persistent Volume

21.2.3. Creating the Persistent Volume Claim

21.2.4. Ensuring NFS Volume Access

21.2.5. Creating the Pod

21.2.6. Creating an Additional Pod to Reference the Same PVC

21.3. Complete Example Using Ceph RBD

21.3.1. Overview

21.3.2. Installing the ceph-common Package

21.3.3. Creating the Ceph Secret

21.3.4. Creating the Persistent Volume

21.3.5. Creating the Persistent Volume Claim

21.3.6. Creating the Pod

21.3.7. Defining Group and Owner IDs (Optional)

21.4. Complete Example Using GlusterFS

21.4.1. Overview

21.4.2. Installing the glusterfs-fuse Package

21.4.3. Creating the Gluster Endpoints and Gluster Service for Persistence

21.4.4. Creating the Persistent Volume

21.4.5. Creating the Persistent Volume Claim

21.4.6. Defining GlusterFS Volume Access

21.4.7. Creating the Pod using NGINX Web Server image

21.5. Backing Docker Registry with GlusterFS Storage

21.5.1. Overview

21.5.2. Prerequisites

21.5.3. Create the Gluster Persistent Volume

21.5.4. Attach the PVC to the Docker Registry

21.5.5. Known Issues

21.5.5.1. Pod Cannot Resolve the Volume Host

21.6. Binding Persistent Volumes by Labels

21.6.1. Overview

21.6.1.1. Assumptions

21.6.2. Defining Specifications

21.6.2.1. Persistent Volume with Labels

21.6.2.2. Persistent Volume Claim with Selectors

21.6.2.3. Volume Endpoints

21.6.2.4. Deploy the PV, PVC, and Endpoints

学习

尝试、购买和销售

社区

关于红帽文档

让开源更具包容性

關於紅帽

Red Hat legal and privacy links

Red Hat legal and privacy links