红帽全球峰会此内容没有您所选择的语言版本。
Chapter 4. Configuring your Apicurio Registry deployment
This chapter explains how to set important configuration options for your Apicurio Registry deployment. This includes features such as the Apicurio Registry web console, logging, and health checks:
For a list of all available configuration options, see Chapter 13, Apicurio Registry configuration reference.
4.1. Configuring the Apicurio Registry web console
You can set optional environment variables to configure the Apicurio Registry web console specifically for your deployment environment or to customize its behavior.
Prerequisites
- You have already installed Apicurio Registry.
Configuring the web console deployment environment
When you access the Apicurio Registry web console in your browser, some initial configuration settings are loaded. The following configuration settings are required:
- URL for core Apicurio Registry server REST API v3
Typically the Apicurio Registry operator will automatically configure the UI component with the REST API v3 URL. However, you can override this value by configuring the appropriate environment variable in the UI component deployment configuration.
Procedure
Configure the following environment variables to override the default URL:
-
REGISTRY_API_URL: Specifies the URL for the core Apicurio Registry server REST API v3. For example,https://registry-api.my-domain.com/apis/registry/v3
Configuring the web console in read-only mode
You can configure the Apicurio Registry web console in read-only mode as an optional feature. This mode disables all features in the Apicurio Registry web console that allow users to make changes to registered artifacts. For example, this includes the following:
- Creating a group
- Creating an artifact
- Uploading a new artifact version
- Updating artifact metadata
- Deleting an artifact
Procedure
Configure the following environment variable:
-
REGISTRY_FEATURE_READ_ONLY: Set totrueto enable read-only mode. Defaults tofalse.
You can configure optional environment variables for liveness and readiness probes to monitor the health of the Apicurio Registry server on OpenShift:
- Liveness probes test if the application can make progress. If the application cannot make progress, OpenShift automatically restarts the failing Pod.
- Readiness probes test if the application is ready to process requests. If the application is not ready, it can become overwhelmed by requests, and OpenShift stops sending requests for the time that the probe fails. If other Pods are OK, they continue to receive requests.
The default values of the liveness and readiness environment variables are designed for most cases and should only be changed if required by your environment. Any changes to the defaults depend on your hardware, network, and amount of data stored. These values should be kept as low as possible to avoid unnecessary overhead.
Prerequisites
- You must have an OpenShift cluster with cluster administrator access.
- You must have already installed Apicurio Registry on OpenShift.
- You must have already installed and configured your chosen Apicurio Registry storage in either AMQ Streams or PostgreSQL.
Procedure
- In the OpenShift Container Platform web console, log in using an account with cluster administrator privileges.
- Click Installed Operators > Apicurio Registry.
- On the ApicurioRegistry tab, click the Operator custom resource for your deployment, for example, example-apicurioregistry.
-
In the main overview page, find the Deployment Name section and the corresponding
DeploymentConfigname for your Apicurio Registry deployment, for example, example-apicurioregistry. -
In the left navigation menu, click Workloads > Deployment Configs, and select your
DeploymentConfigname. Click the Environment tab, and enter your environment variables in the Single values env section, for example:
-
NAME:
LIVENESS_STATUS_RESET -
VALUE:
350
-
NAME:
Click Save at the bottom.
Alternatively, you can perform these steps using the OpenShift
occommand. For more details, see the OpenShift CLI documentation.
This section describes the available environment variables for Apicurio Registry health checks on OpenShift. These include liveness and readiness probes to monitor the health of the Apicurio Registry server on OpenShift. For an example procedure, see Section 4.1.1, “Configuring Apicurio Registry health checks on OpenShift”.
The following environment variables are provided for reference only. The default values are designed for most cases and should only be changed if required by your environment. Any changes to the defaults depend on your hardware, network, and amount of data stored. These values should be kept as low as possible to avoid unnecessary overhead.
Liveness environment variables
| Name | Description | Type | Default |
|---|---|---|---|
|
| Number of liveness issues or errors that can occur before the liveness probe fails. | Integer |
|
|
| Period in which the threshold number of errors must occur. For example, if this value is 60 and the threshold is 1, the check fails after two errors occur in 1 minute | Seconds |
|
|
| Number of seconds that must elapse without any more errors for the liveness probe to reset to OK status. | Seconds |
|
|
| Comma-separated list of ignored liveness exceptions. | String |
|
Because OpenShift automatically restarts a Pod that fails a liveness check, the liveness settings, unlike readiness settings, do not directly affect behavior of Apicurio Registry on OpenShift.
Readiness environment variables
| Name | Description | Type | Default |
|---|---|---|---|
|
| Number of readiness issues or errors that can occur before the readiness probe fails. | Integer |
|
|
| Period in which the threshold number of errors must occur. For example, if this value is 60 and the threshold is 1, the check fails after two errors occur in 1 minute. | Seconds |
|
|
| Number of seconds that must elapse without any more errors for the liveness probe to reset to OK status. In this case, this means how long the Pod stays not ready, until it returns to normal operation. | Seconds |
|
|
| Readiness tracks the timeout of two operations:
If these operations take more time than the configured timeout, this is counted as a readiness issue or error. This value controls the timeouts for both operations. | Seconds |
|
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}