Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

Eclipse Vert.x Runtime Guide

Red Hat build of Eclipse Vert.x 3.9

Use Eclipse Vert.x to develop reactive, non-blocking, asynchronous applications that run on OpenShift and on stand-alone RHEL

Red Hat Customer Content Services

Abstract

This guide provides details on using the Eclipse Vert.x runtime.

Preface
复制链接

This guide covers concepts as well as practical details needed by developers to use the Eclipse Vert.x runtime.

Providing feedback on Red Hat documentation
复制链接

We appreciate your feedback on our documentation. To provide feedback, you can highlight the text in a document and add comments.

This section explains how to submit feedback.

Prerequisites

  • You are logged in to the Red Hat Customer Portal.
  • In the Red Hat Customer Portal, view the document in Multi-page HTML format.

Procedure

To provide your feedback, perform the following steps:

  1. Click the Feedback button in the top-right corner of the document to see existing feedback.

    Note

    The feedback feature is enabled only in the Multi-page HTML format.

  2. Highlight the section of the document where you want to provide feedback.

  3. Click the Add Feedback pop-up that appears near the highlighted text.

    A text box appears in the feedback section on the right side of the page.

  4. Enter your feedback in the text box and click Submit.

    A documentation issue is created.

  5. To view the issue, click the issue tracker link in the feedback view.

This section explains the basic concepts of application development with Red Hat runtimes. It also provides an overview about the Eclipse Vert.x runtime.

Red Hat OpenShift is a container application platform, which provides a collection of cloud-native runtimes. You can use the runtimes to develop, build, and deploy Java or JavaScript applications on OpenShift.

Application development using Red Hat Runtimes for OpenShift includes:

  • A collection of runtimes, such as, Eclipse Vert.x, Thorntail, Spring Boot, and so on, designed to run on OpenShift.
  • A prescriptive approach to cloud-native development on OpenShift.

OpenShift helps you manage, secure, and automate the deployment and monitoring of your applications. You can break your business problems into smaller microservices and use OpenShift to deploy, monitor, and maintain the microservices. You can implement patterns such as circuit breaker, health check, and service discovery, in your applications.

Cloud-native development takes full advantage of cloud computing.

You can build, deploy, and manage your applications on:

OpenShift Container Platform
A private on-premise cloud by Red Hat.
Red Hat Container Development Kit (Minishift)
A local cloud that you can install and execute on your local machine. This functionality is provided by Red Hat Container Development Kit (CDK) or Minishift.
Red Hat CodeReady Studio
An integrated development environment (IDE) for developing, testing, and deploying applications.

To help you get started with application development, all the runtimes are available with example applications. These example applications are accessible from the Developer Launcher. You can use the examples as templates to create your applications.

This guide provides detailed information about the Eclipse Vert.x runtime. For more information on other runtimes, see the relevant runtime documentation.

You can get started with developing cloud-native applications on OpenShift using Developer Launcher (developers.redhat.com/launch). It is a service provided by Red Hat.

Developer Launcher is a stand-alone project generator. You can use it to build and deploy applications on OpenShift instances, such as, OpenShift Container Platform or Minishift or CDK.

1.3. Overview of Eclipse Vert.x
复制链接

Eclipse Vert.x is a toolkit used for creating reactive, non-blocking, and asynchronous applications that run on the JVM (Java Virtual Machine).

Eclipse Vert.x is designed to be cloud-native. It allows applications to use very few threads. This avoids the overhead caused when new threads are created. This enables Eclipse Vert.x applications and services to effectively use their memory as well as CPU quotas in cloud environments.

Using the Eclipse Vert.x runtime in OpenShift makes it simpler and easier to build reactive systems. The OpenShift platform features, such as, rolling updates, service discovery, and canary deployments, are also available. With OpenShift, you can implement microservice patterns, such as externalized configuration, health check, circuit breaker, and failover, in your applications.

1.3.1. Key concepts of Eclipse Vert.x
复制链接

This section describes some key concepts associated with the Eclipse Vert.x runtime. It also provides a brief overview of reactive systems.

Cloud and Container-Native Applications

Cloud-native applications are typically built using microservices. They are designed to form distributed systems of decoupled components. These components usually run inside containers, on top of clusters that contain a large number of nodes. These applications are expected to be resistant to the failure of individual components, and may be updated without requiring any service downtime. Systems based on cloud-native applications rely on automated deployment, scaling, and administrative and maintenance tasks provided by an underlying cloud platform, such as, OpenShift. Management and administration tasks are carried out at the cluster level using off-the-shelf management and orchestration tools, rather than on the level of individual machines.

Reactive Systems

A reactive system, as defined in the reactive manifesto, is a distributed systems with the following characteristics:

Elastic
The system remains responsive under varying workload, with individual components scaled and load-balanced as necessary to accommodate the differences in workload. Elastic applications deliver the same quality of service regardless of the number of requests they receive at the same time.
Resilient
The system remains responsive even if any of its individual components fail. In the system, the components are isolated from each other. This helps individual components to recover quickly in case of failure. Failure of a single component should never affect the functioning of other components. This prevents cascading failure, where the failure of an isolated component causes other components to become blocked and gradually fail.
Responsive
Responsive systems are designed to always respond to requests in a reasonable amount of time to ensure a consistent quality of service. To maintain responsiveness, the communication channel between the applications must never be blocked.
Message-Driven
The individual components of an application use asynchronous message-passing to communicate with each other. If an event takes place, such as a mouse click or a search query on a service, the service sends a message on the common channel, that is, the event bus. The messages are in turn caught and handled by the respective component.

Reactive Systems are distributed systems. They are designed so that their asynchronous properties can be used for application development.

Reactive Programming

While the concept of reactive systems describes the architecture of a distributed system, reactive programming refers to practices that make applications reactive at the code level. Reactive programming is a development model to write asynchronous and event-driven applications. In reactive applications, the code reacts to events or messages.

There are several implementations of reactive programming. For example, simple implementations using callbacks, complex implementations using Reactive Extensions (Rx), and coroutines.

The Reactive Extensions (Rx) is one of the most mature forms of reactive programming in Java. It uses the RxJava library.

1.3.2. Supported Architectures by Eclipse Vert.x
复制链接

Eclipse Vert.x supports the following architectures:

  • x86_64 (AMD64)
  • IBM Z (s390x) in the OpenShift environment
  • IBM Power Systems (ppc64le) in the OpenShift environment

Different images are supported for different architectures. The example codes in this guide demonstrate the commands for x86_64 architecture. If you are using other architectures, specify the relevant image name in the commands.

Refer to the section Supported Java images for Eclipse Vert.x for more information about the image names.

1.3.3. Introduction to example applications
复制链接

Examples are working applications that demonstrate how to build cloud native applications and services. They demonstrate prescriptive architectures, design patterns, tools, and best practices that should be used when you develop your applications. The example applications can be used as templates to create your cloud-native microservices. You can update and redeploy these examples using the deployment process explained in this guide.

The examples implement Microservice patterns such as:

  • Creating REST APIs
  • Interoperating with a database
  • Implementing the health check pattern
  • Externalizing the configuration of your applications to make them more secure and easier to scale

You can use the examples applications as:

  • Working demonstration of the technology
  • Learning tool or a sandbox to understand how to develop applications for your project
  • Starting point for updating or extending your own use case

Each example application is implemented in one or more runtimes. For example, the REST API Level 0 example is available for the following runtimes:

The subsequent sections explain the example applications implemented for the Eclipse Vert.x runtime.

You can download and deploy all the example applications on:

  • x86_64 architecture - The example applications in this guide demonstrate how to build and deploy example applications on x86_64 architecture.
  • s390x architecture - To deploy the example applications on OpenShift environments provisioned on IBM Z infrastructure, specify the relevant IBM Z image name in the commands.
  • ppc64le architecture - To deploy the example applications on OpenShift environments provisioned on IBM Power Systems infrastructure, specify the relevant IBM Power Systems image name in the commands.

Refer to the section Supported Java images for Eclipse Vert.x for more information about the image names.

Some of the example applications also require other products, such as Red Hat Data Grid to demonstrate the workflows. In this case, you must also change the image names of these products to their relevant IBM Z or IBM Power Systems image names in the YAML file of the example applications.

Chapter 2. Configuring your applications
复制链接

This section explains how to configure your applications to work with Eclipse Vert.x runtime. It also describes the procedure to use Agroal in your Eclipse Vert.x applications.

2.1. Configuring your application to use Eclipse Vert.x
复制链接

Reference the Eclipse Vert.x BOM (Bill of Materials) artifact in the pom.xml file at the root directory of your application.

Prerequisites

  • A Maven-based application

Procedure

  1. Open the pom.xml file, add the io.vertx:vertx-dependencies artifact to the <dependencyManagement> section, and specify the <type>pom</type> and <scope>import</scope>: 

    <project>
  ...
  <dependencyManagement>
    <dependencies>
      <dependency>
        <groupId>io.vertx</groupId>
        <artifactId>vertx-dependencies</artifactId>
        <version>${vertx.version}</version>
        <type>pom</type>
        <scope>import</scope>
      </dependency>
    </dependencies>
  </dependencyManagement>
  ...
</project>
    Copy to Clipboard Toggle word wrap

  2. Include the following properties to track the version of Eclipse Vert.x and the Vert.x Maven Plugin you are using: 

    <project>
  ...
  <properties>
    <vertx.version>${vertx.version}</vertx.version>
    <vertx-maven-plugin.version>${vertx-maven-plugin.version}</vertx-maven-plugin.version>
  </properties>
  ...
</project>
    Copy to Clipboard Toggle word wrap

  3. Reference vertx-maven-plugin as the plugin used to package your application: 

    <project>
  ...
  <build>
    <plugins>
        ...
        <plugin>
            <groupId>io.reactiverse</groupId>
            <artifactId>vertx-maven-plugin</artifactId>
            <version>${vertx-maven-plugin.version}</version>
            <executions>
                <execution>
                    <id>vmp</id>
                    <goals>
                        <goal>initialize</goal>
                        <goal>package</goal>
                    </goals>
                </execution>
            </executions>
            <configuration>
                <redeploy>true</redeploy>
            </configuration>
        </plugin>
        ...
    </plugins>
  </build>
  ...
</project>
    Copy to Clipboard Toggle word wrap

  4. Include repositories and pluginRepositories to specify the repositories that contain the artifacts and plugins to build your application: 

    <project>
...
  <repositories>
    <repository>
      <id>redhat-ga</id>
      <name>Red Hat GA Repository</name>
      <url>https://maven.repository.redhat.com/ga/</url>
    </repository>
  </repositories>
  <pluginRepositories>
    <pluginRepository>
      <id>redhat-ga</id>
      <name>Red Hat GA Repository</name>
      <url>https://maven.repository.redhat.com/ga/</url>
    </pluginRepository>
  </pluginRepositories>
...
</project>
    Copy to Clipboard Toggle word wrap

Additional resources

  • For more information about packaging your Eclipse Vert.x application, see the Vert.x Maven Plugin documentation.

Starting with Eclipse Vert.x release 3.5.1.redhat-003, Agroal replaced C3PO as the default JDBC connection pool. C3PO and Agroal use different property names. Upgrading to a newer release of Eclipse Vert.x might break the JDBC connection pool configuration of your Eclipse Vert.x applications. Update the property names in the configuration of your JDBC connection pool to avoid this issue.

Note

To continue using C3P0 as the JDBC connection pool for your application, set the value of the provider_class property in your JDBC connection pool configuration to io.vertx.ext.jdbc.spi.impl.C3P0DataSourceProvider.

Procedure

  1. Update the following property names within your JDBC connection pool configuration to match the connection pool you use:
Expand
C3P0 property nameAgroal property name

url

jdbcUrl

driver_class

driverClassName

user

principal

password

credential

castUUID

castUUID

Additional information

  • Example JDBC connection pool configuration using C3P0: 

    JsonObject config = new JsonObject()
	.put("url", JDBC_URL)
	// set C3P0 as the JDBC connection pool:
	.put("provider_class", "io.vertx.ext.jdbc.spi.impl.C3P0DataSourceProvider")
	.put("driver_class", "org.postgresql.Driver")
	.put("user", JDBC_USER)
	.put("password", JDBC_PASSWORD)
	.put("castUUID", true);
    Copy to Clipboard Toggle word wrap

  • Example JDBC connection pool configuration using Agroal: 

    JsonObject config = new JsonObject()
	.put("jdbcUrl", JDBC_URL)
	.put("driverClassName", "org.postgresql.Driver")
	.put("principal", JDBC_USER)
	.put("credential", JDBC_PASSWORD)
	.put("castUUID", true);
    Copy to Clipboard Toggle word wrap

This section shows you how to download and deploy example applications provided with the runtimes. The example applications are available on Developer Launcher.

3.1. Working with Developer Launcher
复制链接

Developer Launcher (developers.redhat.com/launch) runs on OpenShift. When you deploy example applications, the Developer Launcher guides you through the process of:

  • Selecting a runtime
  • Building and executing the application

Based on your selection, Developer Launcher generates a custom project. You can either download a ZIP version of the project or directly launch the application on an OpenShift Online instance.

When you deploy your application on OpenShift using Developer Launcher, the Source-to-Image (S2I) build process is used. This build process handles all the configuration, build, and deployment steps that are required to run your application on OpenShift.

Red Hat provides example applications that help you get started with the Eclipse Vert.x runtime. These examples are available on Developer Launcher (developers.redhat.com/launch).

You can download the example applications, build, and deploy them. This section explains how to download example applications.

You can use the example applications as templates to create your own cloud-native applications.

Procedure

  1. Go to Developer Launcher (developers.redhat.com/launch).
  2. Click Start.
  3. Click Deploy an Example Application.
  4. Click Select an Example to see the list of example applications available with the runtime.
  5. Select a runtime.

  6. Select an example application.

    Note

    Some example applications are available for multiple runtimes. If you have not selected a runtime in the previous step, you can select a runtime from the list of available runtimes in the example application.

  7. Select the release version for the runtime. You can choose from the community or product releases listed for the runtime.
  8. Click Save.

  9. Click Download to download the example application.

    A ZIP file containing the source and documentation files is downloaded.

You can deploy the example application to either OpenShift Container Platform or CDK (Minishift). Depending on where you want to deploy your application use the relevant web console for authentication.

Prerequisites

  • An example application project created using Developer Launcher.
  • If you are deploying your application on OpenShift Container Platform, you must have access to the OpenShift Container Platform web console.
  • If you are deploying your application on CDK (Minishift), you must have access to the CDK (Minishift) web console.
  • oc command-line client installed.

Procedure

  1. Download the example application.

  2. You can deploy the example application on OpenShift Container Platform or CDK (Minishift) using the oc command-line client.

    You must authenticate the client using the token provided by the web console. Depending on where you want to deploy your application, use either the OpenShift Container Platform web console or CDK (Minishift) web console. Perform the following steps to get the authenticate the client:

    1. Login to the web console.
    2. Click the question mark icon, which is in the upper-right corner of the web console.
    3. Select Command Line Tools from the list.
    4. Copy the oc login command.

    5. Paste the command in a terminal to authenticate your oc CLI client with your account. 

      $ oc login OPENSHIFT_URL --token=MYTOKEN
      Copy to Clipboard Toggle word wrap

  3. Extract the contents of the ZIP file. 

    $ unzip MY_APPLICATION_NAME.zip
    Copy to Clipboard Toggle word wrap

  4. Create a new project in OpenShift. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  5. Navigate to the root directory of MY_APPLICATION_NAME.

  6. Deploy your example application using Maven. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    NOTE: Some example applications may require additional setups. To build and deploy the example applications, follow the instructions provided in the README file.

  7. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    The MY_APP_NAME-1-aaaaa pod has the status Running after it is fully deployed and started. The pod name of your application may be different. The numeric value in the pod name is incremented for every new build. The letters at the end are generated when the pod is created.

  8. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you can use to access it. In this example, you can use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

In addition to using an example, you can create a new Eclipse Vert.x application and deploy it to OpenShift or stand-alone Red Hat Enterprise Linux.

4.1. Developing Eclipse Vert.x application
复制链接

For a basic Eclipse Vert.x application, you need to create the following:

  • A Java class containing Eclipse Vert.x methods.
  • A pom.xml file containing information required by Maven to build the application.

The following procedure creates a simple Greeting application that returns "Greetings!" as response.

Note

For building and deploying your applications to OpenShift, Eclipse Vert.x 3.9 only supports builder images based on OpenJDK 8 and OpenJDK 11. Oracle JDK and OpenJDK 9 builder images are not supported.

Prerequisites

  • OpenJDK 8 or OpenJDK 11 installed.
  • Maven installed.

Procedure

  1. Create a new directory myApp, and navigate to it. 

    $ mkdir myApp
$ cd myApp
    Copy to Clipboard Toggle word wrap

    This is the root directory for the application.

  2. Create directory structure src/main/java/com/example/ in the root directory, and navigate to it. 

    $ mkdir -p src/main/java/com/example/
$ cd src/main/java/com/example/
    Copy to Clipboard Toggle word wrap

  3. Create a Java class file MyApp.java containing the application code. 

    package com.example;

import io.vertx.core.AbstractVerticle;
import io.vertx.core.Future;

public class MyApp extends AbstractVerticle {

    @Override
    public void start(Future<Void> fut) {
        vertx
            .createHttpServer()
            .requestHandler(r ->
                r.response().end("Greetings!"))
            .listen(8080, result -> {
                if (result.succeeded()) {
                    fut.complete();
                } else {
                    fut.fail(result.cause());
                }
            });
    }
}
    Copy to Clipboard Toggle word wrap

  4. Create a pom.xml file in the application root directory myApp with the following content: 

    <?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
  <modelVersion>4.0.0</modelVersion>

  <groupId>com.example</groupId>
  <artifactId>my-app</artifactId>
  <version>1.0.0-SNAPSHOT</version>
  <packaging>jar</packaging>

  <name>My Application</name>
  <description>Example application using Vert.x</description>

  <properties>
    <vertx.version>3.9.6.redhat-00001</vertx.version>
    <vertx-maven-plugin.version>1.0.23</vertx-maven-plugin.version>
    <vertx.verticle>com.example.MyApp</vertx.verticle>

    <!-- Specify the JDK builder image used to build your application. -->
    <fabric8.generator.from>registry.access.redhat.com/redhat-openjdk-18/openjdk18-openshift:latest</fabric8.generator.from>

    <maven.compiler.source>1.8</maven.compiler.source>
    <maven.compiler.target>1.8</maven.compiler.target>
    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
    <project.reporting.outputEncoding>UTF-8</project.reporting.outputEncoding>
  </properties>

  <!-- Import dependencies from the Vert.x BOM. -->
  <dependencyManagement>
    <dependencies>
      <dependency>
        <groupId>io.vertx</groupId>
        <artifactId>vertx-dependencies</artifactId>
        <version>${vertx.version}</version>
        <type>pom</type>
        <scope>import</scope>
      </dependency>
    </dependencies>
  </dependencyManagement>

  <!-- Specify the Vert.x artifacts that your application depends on. -->
  <dependencies>
    <dependency>
      <groupId>io.vertx</groupId>
      <artifactId>vertx-core</artifactId>
    </dependency>
    <dependency>
      <groupId>io.vertx</groupId>
      <artifactId>vertx-web</artifactId>
    </dependency>
  </dependencies>

  <!-- Specify the repositories containing Vert.x artifacts. -->
  <repositories>
    <repository>
      <id>redhat-ga</id>
      <name>Red Hat GA Repository</name>
      <url>https://maven.repository.redhat.com/ga/</url>
    </repository>
  </repositories>

  <!-- Specify the repositories containing the plugins used to execute the build of your application. -->
  <pluginRepositories>
    <pluginRepository>
      <id>redhat-ga</id>
      <name>Red Hat GA Repository</name>
      <url>https://maven.repository.redhat.com/ga/</url>
    </pluginRepository>
  </pluginRepositories>

  <!-- Configure your application to be packaged using the Vert.x Maven Plugin. -->
  <build>
    <plugins>
      <plugin>
        <groupId>io.reactiverse</groupId>
        <artifactId>vertx-maven-plugin</artifactId>
        <version>${vertx-maven-plugin.version}</version>
        <executions>
          <execution>
            <id>vmp</id>
            <goals>
              <goal>initialize</goal>
              <goal>package</goal>
            </goals>
          </execution>
        </executions>
      </plugin>
    </plugins>
  </build>
</project>
    Copy to Clipboard Toggle word wrap

  5. Build the application using Maven from the root directory of the application. 

    $ mvn vertx:run
    Copy to Clipboard Toggle word wrap

  6. Verify that the application is running.

    Using curl or your browser, verify your application is running at http://localhost:8080. 

    $ curl http://localhost:8080
Greetings!
    Copy to Clipboard Toggle word wrap

Additional information

  • As a recommended practice, you can configure liveness and readiness probes to enable health monitoring for your application when running on OpenShift. To learn how application health monitoring on OpenShift works, try the Health Check example.

4.2. Deploying Eclipse Vert.x application to OpenShift
复制链接

To deploy your Eclipse Vert.x application to OpenShift, configure the pom.xml file in your application and then use the Fabric8 Maven plugin. You can specify a Java image by replacing the fabric8.generator.from URL in the pom.xml file.

The images are available in the Red Hat Ecosystem Catalog. 

<fabric8.generator.from>IMAGE_NAME</fabric8.generator.from>
Copy to Clipboard Toggle word wrap

For example, the Java image for RHEL 7 with OpenJDK 8 is specified as: 

<fabric8.generator.from>registry.access.redhat.com/redhat-openjdk-18/openjdk18-openshift:latest</fabric8.generator.from>
Copy to Clipboard Toggle word wrap

4.2.1. Supported Java images for Eclipse Vert.x
复制链接

Eclipse Vert.x is certified and tested with various Java images that are available for different operating systems. For example, Java images are available for RHEL 7 and RHEL 8 with OpenJDK 8 or OpenJDK 11. Similar images are available on IBM Z and IBM Power Systems.

You require Docker or podman authentication to access the RHEL 8 images in the Red Hat Ecosystem Catalog.

The following table lists the images supported by Eclipse Vert.x for different architectures. It also provides links to the images available in the Red Hat Ecosystem Catalog. The image pages contain authentication procedures required to access the RHEL 8 images.

4.2.1.1. Images on x86_64 architecture
复制链接
Expand
OSJavaRed Hat Ecosystem Catalog

RHEL 7

OpenJDK 8

RHEL 7 with OpenJDK 8

RHEL 7

OpenJDK 11

RHEL 7 with OpenJDK 11

RHEL 8

OpenJDK 8

RHEL 8 with OpenJDK 8

RHEL 8

OpenJDK 11

RHEL 8 with OpenJDK 11

Note

The use of a RHEL 8-based container on a RHEL 7 host, for example with OpenShift 3 or OpenShift 4, has limited support. For more information, see the Red Hat Enterprise Linux Container Compatibility Matrix.

4.2.1.2. Images on s390x (IBM Z) architecture
复制链接
Expand
OSJavaRed Hat Ecosystem Catalog

RHEL 8

Eclipse OpenJ9 11

RHEL 8 with Eclipse OpenJ9 11

4.2.1.3. Images on ppc64le (IBM Power Systems) architecture
复制链接
Expand
OSJavaRed Hat Ecosystem Catalog

RHEL 8

Eclipse OpenJ9 11

RHEL 8 with Eclipse OpenJ9 11

Note

The use of a RHEL 8-based container on a RHEL 7 host, for example with OpenShift 3 or OpenShift 4, has limited support. For more information, see the Red Hat Enterprise Linux Container Compatibility Matrix.

For deploying your Eclipse Vert.x application to OpenShift, it must contain:

  • Launcher profile information in the application’s pom.xml file.
  • A deployment yaml file containing environment details.

In the following procedure, a profile with Fabric8 Maven plugin is used for building and deploying the application to OpenShift.

Prerequisites

Procedure

  1. Add the following content to the pom.xml file in the application root directory: 

    <!-- Specify the JDK builder image used to build your application. -->
<properties>
  <fabric8.generator.from>registry.access.redhat.com/redhat-openjdk-18/openjdk18-openshift:latest</fabric8.generator.from>
</properties>

...

<profiles>
    <profile>
      <id>openshift</id>
      <build>
        <plugins>
          <plugin>
            <groupId>io.fabric8</groupId>
            <artifactId>fabric8-maven-plugin</artifactId>
            <version>4.4.1</version>
            <executions>
              <execution>
                <goals>
                  <goal>resource</goal>
                  <goal>build</goal>
                </goals>
              </execution>
            </executions>
          </plugin>
        </plugins>
      </build>
    </profile>
</profiles>
    Copy to Clipboard Toggle word wrap

  2. Replace the fabric8.generator.from property in the pom.xml file to specify the OpenJDK image that you want to use.

    • x86_64 architecture

      • RHEL 7 with OpenJDK 8 

        <fabric8.generator.from>registry.access.redhat.com/redhat-openjdk-18/openjdk18-openshift:latest</fabric8.generator.from>
        Copy to Clipboard Toggle word wrap

      • RHEL 7 with OpenJDK 11 

        <fabric8.generator.from>registry.access.redhat.com/openjdk/openjdk-11-rhel7:latest</fabric8.generator.from>
        Copy to Clipboard Toggle word wrap

      • RHEL 8 with OpenJDK 8 

        <fabric8.generator.from>registry.redhat.io/openjdk/openjdk-8-rhel8:latest</fabric8.generator.from>
        Copy to Clipboard Toggle word wrap

      • RHEL 8 with OpenJDK 11 

        <fabric8.generator.from>registry.redhat.io/openjdk/openjdk-11-rhel8:latest</fabric8.generator.from>
        Copy to Clipboard Toggle word wrap

    • s390x (IBM Z) architecture

      • RHEL 8 with Eclipse OpenJ9 11 

        <fabric8.generator.from>registry.access.redhat.com/openj9/openj9-11-rhel8:latest</fabric8.generator.from>
        Copy to Clipboard Toggle word wrap

    • ppc64le (IBM Power Systems) architecture

      • RHEL 8 with Eclipse OpenJ9 11 

        <{fabric8}.generator.from>registry.access.redhat.com/openj9/openj9-11-rhel8:latest</{fabric8}.generator.from>
        Copy to Clipboard Toggle word wrap

  3. Create deployment.yaml file in src/main/fabric8 directory with the following content: 

    spec:
  template:
    spec:
      containers:
        - name: vertx
          env:
            - name: KUBERNETES_NAMESPACE
              valueFrom:
                fieldRef:
                  apiVersion: template.openshift.io/v1
                  fieldPath: metadata.namespace
            - name: JAVA_OPTIONS
              value: '-Dvertx.cacheDirBase=/tmp -Dvertx.jgroups.config=default'
    Copy to Clipboard Toggle word wrap

To deploy your Eclipse Vert.x application to OpenShift, you must perform the following:

  • Log in to your OpenShift instance.
  • Deploy the application to the OpenShift instance.

Prerequisites

  • oc CLI client installed.
  • Maven installed.

Procedure

  1. Log in to your OpenShift instance with the oc client. 

    $ oc login ...
    Copy to Clipboard Toggle word wrap

  2. Create a new project in the OpenShift instance. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap

  3. Deploy the application to OpenShift using Maven from the application’s root directory. The root directory of an application contains the pom.xml file. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and start the pod.

  4. Verify the deployment.

    1. Check the status of your application and ensure your pod is running. 

      $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
      Copy to Clipboard Toggle word wrap

      The MY_APP_NAME-1-aaaaa pod should have a status of Running once it is fully deployed and started.

      Your specific pod name will vary.

    2. Determine the route for the pod.

      Example Route Information

      $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
      Copy to Clipboard Toggle word wrap

      The route information of a pod gives you the base URL which you use to access it.

      In this example, http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME is the base URL to access the application.

    3. Verify that your application is running in OpenShift. 

      $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME
Greetings!
      Copy to Clipboard Toggle word wrap

To deploy your Eclipse Vert.x application to stand-alone Red Hat Enterprise Linux, configure the pom.xml file in the application, package it using Maven and deploy using the java -jar command.

Prerequisites

  • RHEL 7 or RHEL 8 installed.

For deploying your Eclipse Vert.x application to stand-alone Red Hat Enterprise Linux, you must first package the application using Maven.

Prerequisites

  • Maven installed.

Procedure

  1. Add the following content to the pom.xml file in the application’s root directory: 

      ...
  <build>
    <plugins>
      <plugin>
        <groupId>io.reactiverse</groupId>
        <artifactId>vertx-maven-plugin</artifactId>
        <version>${vertx-maven-plugin.version}</version>
        <executions>
          <execution>
            <id>vmp</id>
            <goals>
              <goal>initialize</goal>
              <goal>package</goal>
            </goals>
          </execution>
        </executions>
      </plugin>
    </plugins>
  </build>
  ...
    Copy to Clipboard Toggle word wrap

  2. Package your application using Maven. 

    $ mvn clean package
    Copy to Clipboard Toggle word wrap

    The resulting JAR file is in the target directory.

To deploy your Eclipse Vert.x application to stand-alone Red Hat Enterprise Linux, use java -jar command.

Prerequisites

  • RHEL 7 or RHEL 8 installed.
  • OpenJDK 8 or OpenJDK 11 installed.
  • A JAR file with the application.

Procedure

  1. Deploy the JAR file with the application. 

    $ java -jar my-app-fat.jar
    Copy to Clipboard Toggle word wrap

  2. Verify the deployment.

    Use curl or your browser to verify your application is running at http://localhost:8080: 

    $ curl http://localhost:8080
    Copy to Clipboard Toggle word wrap

Chapter 5. Debugging Eclipse Vert.x based application
复制链接

This sections contains information about debugging your Eclipse Vert.x–based application both in local and remote deployments.

5.1. Remote debugging
复制链接

To remotely debug an application, you must first configure it to start in a debugging mode, and then attach a debugger to it.

5.1.1. Starting your application locally in debugging mode
复制链接

One of the ways of debugging a Maven-based project is manually launching the application while specifying a debugging port, and subsequently connecting a remote debugger to that port. This method is applicable at least to the following deployments of the application:

  • When launching the application manually using the mvn vertx:debug goal. This starts the application with debugging enabled.

Prerequisites

  • A Maven-based application

Procedure

  1. In a console, navigate to the directory with your application.

  2. Launch your application and specify the debug port using the -Ddebug.port argument: 

    $ mvn vertx:debug -Ddebug.port=$PORT_NUMBER
    Copy to Clipboard Toggle word wrap

    Here, $PORT_NUMBER is an unused port number of your choice. Remember this number for the remote debugger configuration.

    Use the -Ddebug.suspend=true argument to make the application wait until a debugger is attached to start.

To debug your Eclipse Vert.x-based application on OpenShift remotely, you must set the JAVA_DEBUG environment variable inside the container to true and configure port forwarding so that you can connect to your application from a remote debugger.

Prerequisites

  • Your application running on OpenShift.
  • The oc binary installed.
  • The ability to execute the oc port-forward command in your target OpenShift environment.

Procedure

  1. Using the oc command, list the available deployment configurations: 

    $ oc get dc
    Copy to Clipboard Toggle word wrap

  2. Set the JAVA_DEBUG environment variable in the deployment configuration of your application to true, which configures the JVM to open the port number 5005 for debugging. For example: 

    $ oc set env dc/MY_APP_NAME JAVA_DEBUG=true
    Copy to Clipboard Toggle word wrap

  3. Redeploy the application if it is not set to redeploy automatically on configuration change. For example: 

    $ oc rollout latest dc/MY_APP_NAME
    Copy to Clipboard Toggle word wrap

  4. Configure port forwarding from your local machine to the application pod:

    1. List the currently running pods and find one containing your application: 

      $ oc get pod
NAME                            READY     STATUS      RESTARTS   AGE
MY_APP_NAME-3-1xrsp          0/1       Running     0          6s
...
      Copy to Clipboard Toggle word wrap

    2. Configure port forwarding: 

      $ oc port-forward MY_APP_NAME-3-1xrsp $LOCAL_PORT_NUMBER:5005
      Copy to Clipboard Toggle word wrap

      Here, $LOCAL_PORT_NUMBER is an unused port number of your choice on your local machine. Remember this number for the remote debugger configuration.

  5. When you are done debugging, unset the JAVA_DEBUG environment variable in your application pod. For example: 

    $ oc set env dc/MY_APP_NAME JAVA_DEBUG-
    Copy to Clipboard Toggle word wrap

Additional resources

You can also set the JAVA_DEBUG_PORT environment variable if you want to change the debug port from the default, which is 5005.

5.1.3. Attaching a remote debugger to the application
复制链接

When your application is configured for debugging, attach a remote debugger of your choice to it. In this guide, Red Hat CodeReady Studio is covered, but the procedure is similar when using other programs.

Prerequisites

  • The application running either locally or on OpenShift, and configured for debugging.
  • The port number that your application is listening on for debugging.
  • Red Hat CodeReady Studio installed on your machine. You can download it from the Red Hat CodeReady Studio download page.

Procedure

  1. Start Red Hat CodeReady Studio.

  2. Create a new debug configuration for your application:

    1. Click Run→Debug Configurations.
    2. In the list of configurations, double-click Remote Java application. This creates a new remote debugging configuration.
    3. Enter a suitable name for the configuration in the Name field.
    4. Enter the path to the directory with your application into the Project field. You can use the Browse…​ button for convenience.
    5. Set the Connection Type field to Standard (Socket Attach) if it is not already.
    6. Set the Port field to the port number that your application is listening on for debugging.
    7. Click Apply.

  3. Start debugging by clicking the Debug button in the Debug Configurations window.

    To quickly launch your debug configuration after the first time, click Run→Debug History and select the configuration from the list.

Additional resources

5.2. Debug logging
复制链接

Eclipse Vert.x provides a built-in logging API. The default logging implementation for Eclipse Vert.x uses the java.util.logging library that is provided with the Java JDK. Alternatively, Eclipse Vert.x allows you to use a different logging framework, for example, Log4J (Eclipse Vert.x supports Log4J v1 and v2) or SLF4J.

To configure debug logging for your Eclipse Vert.x application using java.util.logging:

  • Set the java.util.logging.config.file system property in the application.properties file. The value of this variable must correspond to the name of your java.util.logging configuration file. This ensures that LogManager initializes java.util.logging at application startup.
  • Alternatively, add a java.util.logging configuration file with the vertx-default-jul-logging.properties name to the classpath of your Maven project. Eclipse Vert.x will use that file to configure java.util.logging on application startup.

Eclipse Vert.x allows you to specify a custom logging backend using the LogDelegateFactory that provides pre-built implementations for the Log4J, Log4J2 and SLF4J libraries. Unlike java.util.logging, which is included with Java by default, the other backends require that you specify their respective libraries as dependencies for your application.

  1. To add logging to your application, create a io.vertx.core.logging.Logger: 

    Logger logger = LoggerFactory.getLogger(className);

logger.info("something happened");
logger.error("oops!", exception);
logger.debug("debug message");
logger.warn("warning");
    Copy to Clipboard Toggle word wrap
    Important

    Logging backends use different formats to represent replaceable tokens in parameterized messages. If you rely on parameterized logging methods, you will not be able to switch logging backends without changing your code.

If you do not want Eclipse Vert.x to use java.util.logging, configure io.vertx.core.logging.Logger to use a different logging framework, for example, Log4J or SLF4J:

  1. Set the value of the vertx.logger-delegate-factory-class-name system property to the name of the class that implements the LogDelegateFactory interface. Eclipse Vert.x provides the pre-built implementations for the following libraries with their corresponding pre-defined classnames listed below:

    Expand
    LibraryClass name

    Log4J v1

    io.vertx.core.logging.Log4jLogDelegateFactory

    Log4J v2

    io.vertx.core.logging.Log4j2LogDelegateFactory

    SLF4J

    io.vertx.core.logging.SLF4JLogDelegateFactory

    When implementing logging using a custom library, ensure that the relevant Log4J or SLF4J jars are included among the dependencies for your application.

    Important

    The Log4J v1 delegate provided with Eclipse Vert.x does not support parameterized messages. The delegates for Log4J v2 and SLF4J both use the {} syntax. The java.util.logging delegate relies on java.text.MessageFormat that uses the {n} syntax.

Netty is a library used by VertX to manage asynchronous network communication in applications.

Netty:

  • Allows quick and easy development of network applications, such as protocol servers and clients.
  • Simplifies and streamlines network programming, such as TCP and UDP socket server development.
  • Provides a unified API for managing blocking and non-blocking connections.

Netty does not rely on an external logging configuration using system properties. Instead, it implements a logging configuration based on logging libraries visible to Netty classes in your project. Netty tries to use the libraries in the following order:

  1. SLF4J
  2. Log4J
  3. java.util.logging as a fallback option

You can set io.netty.util.internal.logging.InternalLoggerFactory directly to a particular logger by adding the following code at the beginning of the main method of your application: 

// Force logging to Log4j
InternalLoggerFactory.setDefaultFactory(Log4JLoggerFactory.INSTANCE);
Copy to Clipboard Toggle word wrap

5.2.5. Accessing debug logs on OpenShift
复制链接

Start your application and interact with it to see the debugging statements in OpenShift.

Prerequisites

  • The oc CLI client installed and authenticated.
  • A Maven-based application with debug logging enabled.

Procedure

  1. Deploy your application to OpenShift: 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

  2. View the logs:

    1. Get the name of the pod with your application: 

      $ oc get pods
      Copy to Clipboard Toggle word wrap

    2. Start watching the log output: 

      $ oc logs -f pod/MY_APP_NAME-2-aaaaa
      Copy to Clipboard Toggle word wrap

      Keep the terminal window displaying the log output open so that you can watch the log output.

  3. Interact with your application:

    For example, if you had debug logging in the REST API Level 0 example to log the message variable in the /api/greeting method:

    1. Get the route of your application: 

      $ oc get routes
      Copy to Clipboard Toggle word wrap

    2. Make an HTTP request on the /api/greeting endpoint of your application: 

      $ curl $APPLICATION_ROUTE/api/greeting?name=Sarah
      Copy to Clipboard Toggle word wrap

  4. Return to the window with your pod logs and inspect debug logging messages in the logs. 

    ...
Feb 11, 2017 10:23:42 AM io.openshift.MY_APP_NAME
INFO: Greeting: Hello, Sarah
...
    Copy to Clipboard Toggle word wrap
  5. To disable debug logging, update your logging configuration file, for example src/main/resources/vertx-default-jul-logging.properties, remove the logging configuration for your class and redeploy your application.

Chapter 6. Monitoring your application
复制链接

This section contains information about monitoring your Eclipse Vert.x–based application running on OpenShift.

6.1.1. Accessing JVM metrics using Jolokia on OpenShift
复制链接

Jolokia is a built-in lightweight solution for accessing JMX (Java Management Extension) metrics over HTTP on OpenShift. Jolokia allows you to access CPU, storage, and memory usage data collected by JMX over an HTTP bridge. Jolokia uses a REST interface and JSON-formatted message payloads. It is suitable for monitoring cloud applications thanks to its comparably high speed and low resource requirements.

For Java-based applications, the OpenShift Web console provides the integrated hawt.io console that collects and displays all relevant metrics output by the JVM running your application.

Prerequistes

  • the oc client authenticated
  • a Java-based application container running in a project on OpenShift
  • latest JDK 1.8.0 image

Procedure

  1. List the deployment configurations of the pods inside your project and select the one that corresponds to your application. 

    oc get dc
    Copy to Clipboard Toggle word wrap 
    NAME         REVISION   DESIRED   CURRENT   TRIGGERED BY
MY_APP_NAME   2          1         1         config,image(my-app:6)
...
    Copy to Clipboard Toggle word wrap

  2. Open the YAML deployment template of the pod running your application for editing. 

    oc edit dc/MY_APP_NAME
    Copy to Clipboard Toggle word wrap

  3. Add the following entry to the ports section of the template and save your changes: 

    ...
spec:
  ...
  ports:
  - containerPort: 8778
    name: jolokia
    protocol: TCP
  ...
...
    Copy to Clipboard Toggle word wrap

  4. Redeploy the pod running your application. 

    oc rollout latest dc/MY_APP_NAME
    Copy to Clipboard Toggle word wrap

    The pod is redeployed with the updated deployment configuration and exposes the port 8778.

  5. Log into the OpenShift Web console.
  6. In the sidebar, navigate to Applications > Pods, and click on the name of the pod running your application.
  7. In the pod details screen, click Open Java Console to access the hawt.io console.

Additional resources

Prometheus connects to a monitored application to collect data; the application does not send metrics to a server.

Prerequisites

  • Prometheus server running on your cluster

Procedure

  1. Include the vertx-micrometer and vertx-web dependencies in the pom.xml file of your application:

    pom.xml

    <dependency>
  <groupId>io.vertx</groupId>
  <artifactId>vertx-micrometer-metrics</artifactId>
</dependency>
<dependency>
  <groupId>io.vertx</groupId>
  <artifactId>vertx-web</artifactId>
</dependency>
    Copy to Clipboard Toggle word wrap

  2. Starting with version 3.5.4, exposing metrics for Prometheus requires that you configure the Eclipse Vert.x options in a custom Launcher class.

    In your custom Launcher class, override the beforeStartingVertx and afterStartingVertx methods to configure the metrics engine, for example:

    Example CustomLauncher.java file

    package org.acme;

import io.micrometer.core.instrument.Meter;
import io.micrometer.core.instrument.config.MeterFilter;
import io.micrometer.core.instrument.distribution.DistributionStatisticConfig;
import io.micrometer.prometheus.PrometheusMeterRegistry;
import io.vertx.core.Vertx;
import io.vertx.core.VertxOptions;
import io.vertx.core.http.HttpServerOptions;
import io.vertx.micrometer.MicrometerMetricsOptions;
import io.vertx.micrometer.VertxPrometheusOptions;
import io.vertx.micrometer.backends.BackendRegistries;

public class CustomLauncher extends Launcher {

  @Override
  public void beforeStartingVertx(VertxOptions options) {
    options.setMetricsOptions(new MicrometerMetricsOptions()
      .setPrometheusOptions(new VertxPrometheusOptions().setEnabled(true)
        .setStartEmbeddedServer(true)
        .setEmbeddedServerOptions(new HttpServerOptions().setPort(8081))
        .setEmbeddedServerEndpoint("/metrics"))
      .setEnabled(true));
  }

  @Override
  public void afterStartingVertx(Vertx vertx) {
    PrometheusMeterRegistry registry = (PrometheusMeterRegistry) BackendRegistries.getDefaultNow();
    registry.config().meterFilter(
      new MeterFilter() {
        @Override
        public DistributionStatisticConfig configure(Meter.Id id, DistributionStatisticConfig config) {
          return DistributionStatisticConfig.builder()
            .percentilesHistogram(true)
            .build()
            .merge(config);
        }
    });
}
    Copy to Clipboard Toggle word wrap

  3. Create a custom Verticle class and override the start method to collect metrics. For example, measure the execution time using the Timer class:

    Example CustomVertxApp.java file

    package org.acme;

import io.micrometer.core.instrument.MeterRegistry;
import io.micrometer.core.instrument.Timer;
import io.vertx.core.AbstractVerticle;
import io.vertx.core.Vertx;
import io.vertx.core.VertxOptions;
import io.vertx.core.http.HttpServerOptions;
import io.vertx.micrometer.backends.BackendRegistries;

public class CustomVertxApp extends AbstractVerticle {

  @Override
  public void start() {
    MeterRegistry registry = BackendRegistries.getDefaultNow();
    Timer timer = Timer
      .builder("my.timer")
      .description("a description of what this timer does")
      .register(registry);

    vertx.setPeriodic(1000, l -> {
      timer.record(() -> {

        // Do something

      });
    });
  }
}
    Copy to Clipboard Toggle word wrap

  4. Set the <vertx.verticle> and <vertx.launcher> properties in the pom.xml file of your application to point to your custom classes: 

    <properties>
  ...
  <vertx.verticle>org.acme.CustomVertxApp</vertx.verticle>
  <vertx.launcher>org.acme.CustomLauncher</vertx.launcher>
  ...
</properties>
    Copy to Clipboard Toggle word wrap

  5. Launch your application: 

    $ mvn vertx:run
    Copy to Clipboard Toggle word wrap

  6. Invoke the traced endpoint several times: 

    $ curl http://localhost:8080/
Hello
    Copy to Clipboard Toggle word wrap

  7. Wait at least 15 seconds for collection to occur, and see the metrics in Prometheus UI:

    1. Open the Prometheus UI at http://localhost:9090/ and type hello into the Expression box.
    2. From the suggestions, select for example application:hello_count and click Execute.
    3. In the table that is displayed, you can see how many times the resource method was invoked.
    4. Alternatively, select application:hello_time_mean_seconds to see the mean time of all the invocations.

    Note that all metrics you created are prefixed with application:. There are other metrics, automatically exposed by Eclipse Vert.x as the Eclipse MicroProfile Metrics specification requires. Those metrics are prefixed with base: and vendor: and expose information about the JVM in which the application runs.

Additional resources

Chapter 7. Example applications for Eclipse Vert.x
复制链接

The Eclipse Vert.x runtime provides example applications. When you start developing applications on OpenShift, you can use the example applications as templates.

You can access these example applications on Developer Launcher.

You can download and deploy all the example applications on:

  • x86_64 architecture - The example applications in this guide demonstrate how to build and deploy example applications on x86_64 architecture.
  • s390x architecture - To deploy the example applications on OpenShift environments provisioned on IBM Z infrastructure, specify the relevant IBM Z image name in the commands.
  • ppc64le architecture - To deploy the example applications on OpenShift environments provisioned on IBM Power Systems infrastructure, specify the relevant IBM Power Systems image name in the commands.

Refer to the section Supported Java images for Eclipse Vert.x for more information about the image names.

Some of the example applications also require other products, such as Red Hat Data Grid to demonstrate the workflows. In this case, you must also change the image names of these products to their relevant IBM Z and IBM Power Systems image names in the YAML file of the example applications.

7.1. REST API Level 0 example for Eclipse Vert.x
复制链接

Important

The following example is not meant to be run in a production environment.

Example proficiency level: Foundational.

What the REST API Level 0 example does

The REST API Level 0 example shows how to map business operations to a remote procedure call endpoint over HTTP using a REST framework. This corresponds to Level 0 in the Richardson Maturity Model. Creating an HTTP endpoint using REST and its underlying principles to define your API lets you quickly prototype and design the API flexibly.

This example introduces the mechanics of interacting with a remote service using the HTTP protocol. It allows you to:

  • Execute an HTTP GET request on the api/greeting endpoint.
  • Receive a response in JSON format with a payload consisting of the Hello, World! String.
  • Execute an HTTP GET request on the api/greeting endpoint while passing in a String argument. This uses the name request parameter in the query string.
  • Receive a response in JSON format with a payload of Hello, $name! with $name replaced by the value of the name parameter passed into the request.

7.1.1. REST API Level 0 design tradeoffs
复制链接

Expand
Table 7.1. Design tradeoffs
ProsCons
  • The example application enables fast prototyping.
  • The API Design is flexible.
  • HTTP endpoints allow clients to be language-neutral.

  • As an application or service matures, the REST API Level 0 approach might not scale well. It might not support a clean API design or use cases with database interactions.

    • Any operations involving shared, mutable state must be integrated with an appropriate backing datastore.
    • All requests handled by this API design are scoped only to the container servicing the request. Subsequent requests might not be served by the same container.

Use one of the following options to execute the REST API Level 0 example application on OpenShift Online.

Although each method uses the same oc commands to deploy your application, using developers.redhat.com/launch provides an automated deployment workflow that executes the oc commands for you.

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Red Hat Developer Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the developers.redhat.com/launch URL in a browser.
  2. Follow on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.1.2.2. Authenticating the oc CLI client
复制链接

To work with example applications on OpenShift Online using the oc command-line client, you must authenticate the client using the token provided by the OpenShift Online web interface.

Prerequisites

Procedure

  1. Navigate to the OpenShift Online URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your OpenShift Online account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new project in OpenShift. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  5. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    The MY_APP_NAME-1-aaaaa pod should have a status of Running once it is fully deployed and started. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

Use one of the following options to execute the REST API Level 0 example application locally on Minishift or CDK:

Although each method uses the same oc commands to deploy your application, using Fabric8 Launcher provides an automated deployment workflow that executes the oc commands for you.

You need the Fabric8 Launcher tool URL and user credentials to create and deploy example applications on Minishift or CDK. This information is provided when the Minishift or CDK is started.

Prerequisites

  • The Fabric8 Launcher tool installed, configured, and running.

Procedure

  1. Navigate to the console where you started Minishift or CDK.

  2. Check the console output for the URL and user credentials you can use to access the running Fabric8 Launcher:

    Example Console Output from a Minishift or CDK Startup

    ...
-- Removing temporary directory ... OK
-- Server Information ...
   OpenShift server started.
   The server is accessible via web console at:
       https://192.168.42.152:8443

   You are logged in as:
       User:     developer
       Password: developer

   To login as administrator:
       oc login -u system:admin
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Fabric8 Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the Fabric8 Launcher URL in a browser.
  2. Follow the on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.1.3.3. Authenticating the oc CLI client
复制链接

To work with example applications on Minishift or CDK using the oc command-line client, you must authenticate the client using the token provided by the Minishift or CDK web interface.

Prerequisites

Procedure

  1. Navigate to the Minishift or CDK URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your Minishift or CDK account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new project in OpenShift. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  5. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    The MY_APP_NAME-1-aaaaa pod should have a status of Running once it is fully deployed and started. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

The process of creating and deploying example applications to OpenShift Container Platform is similar to OpenShift Online:

Prerequisites

Procedure

The example provides a default HTTP endpoint that accepts GET requests.

Prerequisites

  • Your application running
  • The curl binary or a web browser

Procedure

  1. Use curl to execute a GET request against the example. You can also use a browser to do this. 

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/greeting
{
  "content" : "Hello, World!"
}
    Copy to Clipboard Toggle word wrap

  2. Use curl to execute a GET request with the name URL parameter against the example. You can also use a browser to do this. 

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/greeting?name=Sarah
{
  "content" : "Hello, Sarah!"
}
    Copy to Clipboard Toggle word wrap
Note

From a browser, you can also use a form provided by the example to perform these same interactions. The form is located at the root of the project http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME.

This example application includes a self-contained set of integration tests. When run inside an OpenShift project, the tests:

  • Deploy a test instance of the application to the project.
  • Execute the individual tests on that instance.
  • Remove all instances of the application from the project when the testing is done.
Warning

Executing integration tests removes all existing instances of the example application from the target OpenShift project. To avoid accidentally removing your example application, ensure that you create and select a separate OpenShift project to execute the tests.

Prerequisites

  • The oc client authenticated
  • An empty OpenShift project

Procedure

Execute the following command to run the integration tests: 

$ mvn clean verify -Popenshift,openshift-it
Copy to Clipboard Toggle word wrap

7.1.7. REST resources
复制链接

More background and related information on REST can be found here:

7.2. Externalized Configuration example for Eclipse Vert.x
复制链接

Important

The following example is not meant to be run in a production environment.

Example proficiency level: Foundational.

Externalized Configuration provides a basic example of using a ConfigMap to externalize configuration. ConfigMap is an object used by OpenShift to inject configuration data as simple key and value pairs into one or more Linux containers while keeping the containers independent of OpenShift.

This example shows you how to:

  • Set up and configure a ConfigMap.
  • Use the configuration provided by the ConfigMap within an application.
  • Deploy changes to the ConfigMap configuration of running applications.

7.2.1. The externalized configuration design pattern
复制链接

Whenever possible, externalize the application configuration and separate it from the application code. This allows the application configuration to change as it moves through different environments, but leaves the code unchanged. Externalizing the configuration also keeps sensitive or internal information out of your code base and version control. Many languages and application servers provide environment variables to support externalizing an application’s configuration.

Microservices architectures and multi-language (polyglot) environments add a layer of complexity to managing an application’s configuration. Applications consist of independent, distributed services, and each can have its own configuration. Keeping all configuration data synchronized and accessible creates a maintenance challenge.

ConfigMaps enable the application configuration to be externalized and used in individual Linux containers and pods on OpenShift. You can create a ConfigMap object in a variety of ways, including using a YAML file, and inject it into the Linux container. ConfigMaps also allow you to group and scale sets of configuration data. This lets you configure a large number of environments beyond the basic Development, Stage, and Production. You can find more information about ConfigMaps in the OpenShift documentation.

7.2.2. Externalized Configuration design tradeoffs
复制链接

Expand
Table 7.2. Design Tradeoffs
ProsCons
  • Configuration is separate from deployments
  • Can be updated independently
  • Can be shared across services
  • Adding configuration to environment requires additional step
  • Has to be maintained separately
  • Requires coordination beyond the scope of a service

Use one of the following options to execute the Externalized Configuration example application on OpenShift Online.

Although each method uses the same oc commands to deploy your application, using developers.redhat.com/launch provides an automated deployment workflow that executes the oc commands for you.

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Red Hat Developer Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the developers.redhat.com/launch URL in a browser.
  2. Follow on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.2.3.2. Authenticating the oc CLI client
复制链接

To work with example applications on OpenShift Online using the oc command-line client, you must authenticate the client using the token provided by the OpenShift Online web interface.

Prerequisites

Procedure

  1. Navigate to the OpenShift Online URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your OpenShift Online account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Externalized Configuration example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap

  3. Assign view access rights to the service account before deploying your example application, so that the application can access the OpenShift API in order to read the contents of the ConfigMap. 

    $ oc policy add-role-to-user view -n $(oc project -q) -z default
    Copy to Clipboard Toggle word wrap
  4. Navigate to the root directory of your application.

  5. Deploy your ConfigMap configuration to OpenShift using app-config.yml. 

    $ oc create configmap app-config --from-file=app-config.yml
    Copy to Clipboard Toggle word wrap

  6. Verify your ConfigMap configuration has been deployed. 

    $ oc get configmap app-config -o yaml

apiVersion: template.openshift.io/v1
data:
  app-config.yml: |-
      message : "Hello, %s from a ConfigMap !"
      level : INFO
...
    Copy to Clipboard Toggle word wrap

  7. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  8. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                                       READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    The MY_APP_NAME-1-aaaaa pod should have a status of Running once its fully deployed and started. You should also wait for your pod to be ready before proceeding, which is shown in the READY column. For example, MY_APP_NAME-1-aaaaa is ready when the READY column is 1/1. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  9. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

Use one of the following options to execute the Externalized Configuration example application locally on Minishift or CDK:

Although each method uses the same oc commands to deploy your application, using Fabric8 Launcher provides an automated deployment workflow that executes the oc commands for you.

You need the Fabric8 Launcher tool URL and user credentials to create and deploy example applications on Minishift or CDK. This information is provided when the Minishift or CDK is started.

Prerequisites

  • The Fabric8 Launcher tool installed, configured, and running.

Procedure

  1. Navigate to the console where you started Minishift or CDK.

  2. Check the console output for the URL and user credentials you can use to access the running Fabric8 Launcher:

    Example Console Output from a Minishift or CDK Startup

    ...
-- Removing temporary directory ... OK
-- Server Information ...
   OpenShift server started.
   The server is accessible via web console at:
       https://192.168.42.152:8443

   You are logged in as:
       User:     developer
       Password: developer

   To login as administrator:
       oc login -u system:admin
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Fabric8 Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the Fabric8 Launcher URL in a browser.
  2. Follow the on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.2.4.3. Authenticating the oc CLI client
复制链接

To work with example applications on Minishift or CDK using the oc command-line client, you must authenticate the client using the token provided by the Minishift or CDK web interface.

Prerequisites

Procedure

  1. Navigate to the Minishift or CDK URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your Minishift or CDK account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Externalized Configuration example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap

  3. Assign view access rights to the service account before deploying your example application, so that the application can access the OpenShift API in order to read the contents of the ConfigMap. 

    $ oc policy add-role-to-user view -n $(oc project -q) -z default
    Copy to Clipboard Toggle word wrap
  4. Navigate to the root directory of your application.

  5. Deploy your ConfigMap configuration to OpenShift using app-config.yml. 

    $ oc create configmap app-config --from-file=app-config.yml
    Copy to Clipboard Toggle word wrap

  6. Verify your ConfigMap configuration has been deployed. 

    $ oc get configmap app-config -o yaml

apiVersion: template.openshift.io/v1
data:
  app-config.yml: |-
      message : "Hello, %s from a ConfigMap !"
      level : INFO
...
    Copy to Clipboard Toggle word wrap

  7. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  8. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                                       READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    The MY_APP_NAME-1-aaaaa pod should have a status of Running once its fully deployed and started. You should also wait for your pod to be ready before proceeding, which is shown in the READY column. For example, MY_APP_NAME-1-aaaaa is ready when the READY column is 1/1. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  9. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

The process of creating and deploying example applications to OpenShift Container Platform is similar to OpenShift Online:

Prerequisites

Procedure

The example provides a default HTTP endpoint that accepts GET requests.

Prerequisites

  • Your application running
  • The curl binary or a web browser

Procedure

  1. Use curl to execute a GET request against the example. You can also use a browser to do this. 

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/greeting
{"content":"Hello, World from a ConfigMap !"}
    Copy to Clipboard Toggle word wrap

  2. Update the deployed ConfigMap configuration. 

    $ oc edit configmap app-config
    Copy to Clipboard Toggle word wrap

    Change the value for the message key to Bonjour, %s from a ConfigMap ! and save the file.

  3. Update of the ConfigMap should be read by the application within an acceptable time (a few seconds) without requiring a restart of the application.

  4. Execute a GET request using curl against the example with the updated ConfigMap configuration to see your updated greeting. You can also do this from your browser using the web form provided by the application. 

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/greeting
{"content":"Bonjour, World from a ConfigMap !"}
    Copy to Clipboard Toggle word wrap

This example application includes a self-contained set of integration tests. When run inside an OpenShift project, the tests:

  • Deploy a test instance of the application to the project.
  • Execute the individual tests on that instance.
  • Remove all instances of the application from the project when the testing is done.
Warning

Executing integration tests removes all existing instances of the example application from the target OpenShift project. To avoid accidentally removing your example application, ensure that you create and select a separate OpenShift project to execute the tests.

Prerequisites

  • The oc client authenticated
  • An empty OpenShift project

  • View access permission assigned to the service account of your example application. This allows your application to read the configuration from the ConfigMap: 

    $ oc policy add-role-to-user view -n $(oc project -q) -z default
    Copy to Clipboard Toggle word wrap

Procedure

Execute the following command to run the integration tests: 

$ mvn clean verify -Popenshift,openshift-it
Copy to Clipboard Toggle word wrap

7.2.8. Externalized Configuration resources
复制链接

More background and related information on Externalized Configuration and ConfigMap can be found here:

7.3. Relational Database Backend example for Eclipse Vert.x
复制链接

Important

The following example is not meant to be run in a production environment.

Limitation: Run this example application on a Minishift or CDK. You can also use a manual workflow to deploy this example to OpenShift Online Pro and OpenShift Container Platform. This example is not currently available on OpenShift Online Starter.

Example proficiency level: Foundational.

What the Relational Database Backend example does

The Relational Database Backend example expands on the REST API Level 0 application to provide a basic example of performing create, read, update and delete (CRUD) operations on a PostgreSQL database using a simple HTTP API. CRUD operations are the four basic functions of persistent storage, widely used when developing an HTTP API dealing with a database.

The example also demonstrates the ability of the HTTP application to locate and connect to a database in OpenShift. Each runtime shows how to implement the connectivity solution best suited in the given case. The runtime can choose between options such as using JDBC, JPA, or accessing ORM APIs directly.

The example application exposes an HTTP API, which provides endpoints that allow you to manipulate data by performing CRUD operations over HTTP. The CRUD operations are mapped to HTTP Verbs. The API uses JSON formatting to receive requests and return responses to the user. The user can also use a user interface provided by the example to use the application. Specifically, this example provides an application that allows you to:

  • Navigate to the application web interface in your browser. This exposes a simple website allowing you to perform CRUD operations on the data in the my_data database.
  • Execute an HTTP GET request on the api/fruits endpoint.
  • Receive a response formatted as a JSON array containing the list of all fruits in the database.
  • Execute an HTTP GET request on the api/fruits/* endpoint while passing in a valid item ID as an argument.
  • Receive a response in JSON format containing the name of the fruit with the given ID. If no item matches the specified ID, the call results in an HTTP error 404.
  • Execute an HTTP POST request on the api/fruits endpoint passing in a valid name value to create a new entry in the database.
  • Execute an HTTP PUT request on the api/fruits/* endpoint passing in a valid ID and a name as an argument. This updates the name of the item with the given ID to match the name specified in your request.
  • Execute an HTTP DELETE request on the api/fruits/* endpoint, passing in a valid ID as an argument. This removes the item with the specified ID from the database and returns an HTTP code 204 (No Content) as a response. If you pass in an invalid ID, the call results in an HTTP error 404.

This example also contains a set of automated integration tests that can be used to verify that the application is fully integrated with the database.

This example does not showcase a fully matured RESTful model (level 3), but it does use compatible HTTP verbs and status, following the recommended HTTP API practices.

7.3.1. Relational Database Backend design tradeoffs
复制链接

Expand
Table 7.3. Design Tradeoffs
ProsCons
  • Each runtime determines how to implement the database interactions. One can use a low-level connectivity API such as JDBC, some other can use JPA, and yet another can access ORM APIs directly. Each runtime decides what would be the best way.
  • Each runtime determines how the schema is created.
  • The PostgreSQL database provided with this example application is not backed up with persistent storage. Changes to the database are lost if you stop or redeploy the database pod. To use an external database with your example application’s pod in order to preserve changes, see the Creating an application with a database chapter of the OpenShift Documentation. It is also possible to set up persistent storage with database containers on OpenShift. (For more details about using persistent storage with OpenShift and containers, see the Persistent Storage, Managing Volumes and Persistent Volumes chapters of the OpenShift Documentation).

Use one of the following options to execute the Relational Database Backend example application on OpenShift Online.

Although each method uses the same oc commands to deploy your application, using developers.redhat.com/launch provides an automated deployment workflow that executes the oc commands for you.

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Red Hat Developer Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the developers.redhat.com/launch URL in a browser.
  2. Follow on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.3.2.2. Authenticating the oc CLI client
复制链接

To work with example applications on OpenShift Online using the oc command-line client, you must authenticate the client using the token provided by the OpenShift Online web interface.

Prerequisites

Procedure

  1. Navigate to the OpenShift Online URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your OpenShift Online account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Relational Database Backend example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Deploy the PostgreSQL database to OpenShift. Ensure that you use the following values for user name, password, and database name when creating your database application. The example application is pre-configured to use these values. Using different values prevents your application from integrating with the database. 

    $ oc new-app -e POSTGRESQL_USER=luke -ePOSTGRESQL_PASSWORD=secret -ePOSTGRESQL_DATABASE=my_data registry.access.redhat.com/rhscl/postgresql-10-rhel7 --name=my-database
    Copy to Clipboard Toggle word wrap

  5. Check the status of your database and ensure the pod is running. 

    $ oc get pods -w
my-database-1-aaaaa   1/1       Running   0         45s
my-database-1-deploy   0/1       Completed   0         53s
    Copy to Clipboard Toggle word wrap

    The my-database-1-aaaaa pod should have a status of Running and should be indicated as ready once it is fully deployed and started. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. Use maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  7. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa       1/1       Running     0          58s
MY_APP_NAME-s2i-1-build   0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    Your MY_APP_NAME-1-aaaaa pod should have a status of Running and should be indicated as ready once it is fully deployed and started.

  8. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                     PATH      SERVICES             PORT      TERMINATION
MY_APP_NAME   MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME   8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

Use one of the following options to execute the Relational Database Backend example application locally on Minishift or CDK:

Although each method uses the same oc commands to deploy your application, using Fabric8 Launcher provides an automated deployment workflow that executes the oc commands for you.

You need the Fabric8 Launcher tool URL and user credentials to create and deploy example applications on Minishift or CDK. This information is provided when the Minishift or CDK is started.

Prerequisites

  • The Fabric8 Launcher tool installed, configured, and running.

Procedure

  1. Navigate to the console where you started Minishift or CDK.

  2. Check the console output for the URL and user credentials you can use to access the running Fabric8 Launcher:

    Example Console Output from a Minishift or CDK Startup

    ...
-- Removing temporary directory ... OK
-- Server Information ...
   OpenShift server started.
   The server is accessible via web console at:
       https://192.168.42.152:8443

   You are logged in as:
       User:     developer
       Password: developer

   To login as administrator:
       oc login -u system:admin
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Fabric8 Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the Fabric8 Launcher URL in a browser.
  2. Follow the on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.3.3.3. Authenticating the oc CLI client
复制链接

To work with example applications on Minishift or CDK using the oc command-line client, you must authenticate the client using the token provided by the Minishift or CDK web interface.

Prerequisites

Procedure

  1. Navigate to the Minishift or CDK URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your Minishift or CDK account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Relational Database Backend example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Deploy the PostgreSQL database to OpenShift. Ensure that you use the following values for user name, password, and database name when creating your database application. The example application is pre-configured to use these values. Using different values prevents your application from integrating with the database. 

    $ oc new-app -e POSTGRESQL_USER=luke -ePOSTGRESQL_PASSWORD=secret -ePOSTGRESQL_DATABASE=my_data registry.access.redhat.com/rhscl/postgresql-10-rhel7 --name=my-database
    Copy to Clipboard Toggle word wrap

  5. Check the status of your database and ensure the pod is running. 

    $ oc get pods -w
my-database-1-aaaaa   1/1       Running   0         45s
my-database-1-deploy   0/1       Completed   0         53s
    Copy to Clipboard Toggle word wrap

    The my-database-1-aaaaa pod should have a status of Running and should be indicated as ready once it is fully deployed and started. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. Use maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  7. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa       1/1       Running     0          58s
MY_APP_NAME-s2i-1-build   0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    Your MY_APP_NAME-1-aaaaa pod should have a status of Running and should be indicated as ready once it is fully deployed and started.

  8. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                     PATH      SERVICES             PORT      TERMINATION
MY_APP_NAME   MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME   8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

The process of creating and deploying example applications to OpenShift Container Platform is similar to OpenShift Online:

Prerequisites

Procedure

7.3.5. Interacting with the Relational Database Backend API
复制链接

When you have finished creating your example application, you can interact with it the following way:

Prerequisites

  • Your application running
  • The curl binary or a web browser

Procedure

  1. Obtain the URL of your application by executing the following command: 

    $ oc get route MY_APP_NAME
    Copy to Clipboard Toggle word wrap 
    NAME                 HOST/PORT                                         PATH      SERVICES             PORT      TERMINATION
MY_APP_NAME           MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME              MY_APP_NAME           8080
    Copy to Clipboard Toggle word wrap

  2. To access the web interface of the database application, navigate to the application URL in your browser: 

    http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME
    Copy to Clipboard Toggle word wrap

    Alternatively, you can make requests directly on the api/fruits/* endpoint using curl:

    List all entries in the database:

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/fruits
    Copy to Clipboard Toggle word wrap 

    [ {
  "id" : 1,
  "name" : "Apple",
  "stock" : 10
}, {
  "id" : 2,
  "name" : "Orange",
  "stock" : 10
}, {
  "id" : 3,
  "name" : "Pear",
  "stock" : 10
} ]
    Copy to Clipboard Toggle word wrap

    Retrieve an entry with a specific ID

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/fruits/3
    Copy to Clipboard Toggle word wrap 

    {
  "id" : 3,
  "name" : "Pear",
  "stock" : 10
}
    Copy to Clipboard Toggle word wrap

    Create a new entry:

    $ curl -H "Content-Type: application/json" -X POST -d '{"name":"Peach","stock":1}'  http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/fruits
    Copy to Clipboard Toggle word wrap 

    {
  "id" : 4,
  "name" : "Peach",
  "stock" : 1
}
    Copy to Clipboard Toggle word wrap

    Update an Entry

    $ curl -H "Content-Type: application/json" -X PUT -d '{"name":"Apple","stock":100}'  http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/fruits/1
    Copy to Clipboard Toggle word wrap 

    {
  "id" : 1,
  "name" : "Apple",
  "stock" : 100
}
    Copy to Clipboard Toggle word wrap

    Delete an Entry:

    $ curl -X DELETE http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/fruits/1
    Copy to Clipboard Toggle word wrap

Troubleshooting
  • If you receive an HTTP Error code 503 as a response after executing these commands, it means that the application is not ready yet.

This example application includes a self-contained set of integration tests. When run inside an OpenShift project, the tests:

  • Deploy a test instance of the application to the project.
  • Execute the individual tests on that instance.
  • Remove all instances of the application from the project when the testing is done.
Warning

Executing integration tests removes all existing instances of the example application from the target OpenShift project. To avoid accidentally removing your example application, ensure that you create and select a separate OpenShift project to execute the tests.

Prerequisites

  • The oc client authenticated
  • An empty OpenShift project

Procedure

Execute the following command to run the integration tests: 

$ mvn clean verify -Popenshift,openshift-it
Copy to Clipboard Toggle word wrap

7.3.7. Relational database resources
复制链接

More background and related information on running relational databases in OpenShift, CRUD, HTTP API and REST can be found here:

7.4. Health Check example for Eclipse Vert.x
复制链接

Important

The following example is not meant to be run in a production environment.

Example proficiency level: Foundational.

When you deploy an application, it is important to know if it is available and if it can start handling incoming requests. Implementing the health check pattern allows you to monitor the health of an application, which includes if an application is available and whether it is able to service requests.

Note

If you are not familiar with the health check terminology, see the Section 7.4.1, “Health check concepts” section first.

The purpose of this use case is to demonstrate the health check pattern through the use of probing. Probing is used to report the liveness and readiness of an application. In this use case, you configure an application which exposes an HTTP health endpoint to issue HTTP requests. If the container is alive, according to the liveness probe on the health HTTP endpoint, the management platform receives 200 as return code and no further action is required. If the health HTTP endpoint does not return a response, for example if the thread is blocked, then the application is not considered alive according to the liveness probe. In that case, the platform kills the pod corresponding to that application and recreates a new pod to restart the application.

This use case also allows you to demonstrate and use a readiness probe. In cases where the application is running but is unable to handle requests, such as when the application returns an HTTP 503 response code during restart, this application is not considered ready according to the readiness probe. If the application is not considered ready by the readiness probe, requests are not routed to that application until it is considered ready according to the readiness probe.

7.4.1. Health check concepts
复制链接

In order to understand the health check pattern, you need to first understand the following concepts:

Liveness
Liveness defines whether an application is running or not. Sometimes a running application moves into an unresponsive or stopped state and needs to be restarted. Checking for liveness helps determine whether or not an application needs to be restarted.
Readiness
Readiness defines whether a running application can service requests. Sometimes a running application moves into an error or broken state where it can no longer service requests. Checking readiness helps determine whether or not requests should continue to be routed to that application.
Fail-over
Fail-over enables failures in servicing requests to be handled gracefully. If an application fails to service a request, that request and future requests can then fail-over or be routed to another application, which is usually a redundant copy of that same application.
Resilience and Stability
Resilience and Stability enable failures in servicing requests to be handled gracefully. If an application fails to service a request due to connection loss, in a resilient system that request can be retried after the connection is re-established.
Probe
A probe is a Kubernetes action that periodically performs diagnostics on a running container.

Use one of the following options to execute the Health Check example application on OpenShift Online.

Although each method uses the same oc commands to deploy your application, using developers.redhat.com/launch provides an automated deployment workflow that executes the oc commands for you.

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Red Hat Developer Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the developers.redhat.com/launch URL in a browser.
  2. Follow on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.4.2.2. Authenticating the oc CLI client
复制链接

To work with example applications on OpenShift Online using the oc command-line client, you must authenticate the client using the token provided by the OpenShift Online web interface.

Prerequisites

Procedure

  1. Navigate to the OpenShift Online URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your OpenShift Online account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Health Check example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  5. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    The MY_APP_NAME-1-aaaaa pod should have a status of Running once its fully deployed and started. You should also wait for your pod to be ready before proceeding, which is shown in the READY column. For example, MY_APP_NAME-1-aaaaa is ready when the READY column is 1/1. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

Use one of the following options to execute the Health Check example application locally on Minishift or CDK:

Although each method uses the same oc commands to deploy your application, using Fabric8 Launcher provides an automated deployment workflow that executes the oc commands for you.

You need the Fabric8 Launcher tool URL and user credentials to create and deploy example applications on Minishift or CDK. This information is provided when the Minishift or CDK is started.

Prerequisites

  • The Fabric8 Launcher tool installed, configured, and running.

Procedure

  1. Navigate to the console where you started Minishift or CDK.

  2. Check the console output for the URL and user credentials you can use to access the running Fabric8 Launcher:

    Example Console Output from a Minishift or CDK Startup

    ...
-- Removing temporary directory ... OK
-- Server Information ...
   OpenShift server started.
   The server is accessible via web console at:
       https://192.168.42.152:8443

   You are logged in as:
       User:     developer
       Password: developer

   To login as administrator:
       oc login -u system:admin
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Fabric8 Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the Fabric8 Launcher URL in a browser.
  2. Follow the on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.4.3.3. Authenticating the oc CLI client
复制链接

To work with example applications on Minishift or CDK using the oc command-line client, you must authenticate the client using the token provided by the Minishift or CDK web interface.

Prerequisites

Procedure

  1. Navigate to the Minishift or CDK URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your Minishift or CDK account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Health Check example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  5. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-1-aaaaa               1/1       Running     0          58s
MY_APP_NAME-s2i-1-build           0/1       Completed   0          2m
    Copy to Clipboard Toggle word wrap

    The MY_APP_NAME-1-aaaaa pod should have a status of Running once its fully deployed and started. You should also wait for your pod to be ready before proceeding, which is shown in the READY column. For example, MY_APP_NAME-1-aaaaa is ready when the READY column is 1/1. Your specific pod name will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME         MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME      MY_APP_NAME      8080
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

The process of creating and deploying example applications to OpenShift Container Platform is similar to OpenShift Online:

Prerequisites

Procedure

After you deploy the example application, you will have the MY_APP_NAME service running. The MY_APP_NAME service exposes the following REST endpoints:

/api/greeting
Returns a JSON containing greeting of name parameter (or World as default value).
/api/stop
Forces the service to become unresponsive as means to simulate a failure.

The following steps demonstrate how to verify the service availability and simulate a failure. This failure of an available service causes the OpenShift self-healing capabilities to be trigger on the service.

Alternatively, you can use the web interface to perform these steps.

  1. Use curl to execute a GET request against the MY_APP_NAME service. You can also use a browser to do this. 

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/greeting
    Copy to Clipboard Toggle word wrap 
    {"content":"Hello, World!"}
    Copy to Clipboard Toggle word wrap

  2. Invoke the /api/stop endpoint and verify the availability of the /api/greeting endpoint shortly after that.

    Invoking the /api/stop endpoint simulates an internal service failure and triggers the OpenShift self-healing capabilities. When invoking /api/greeting after simulating the failure, the service should return a HTTP status 503. 

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/stop
    Copy to Clipboard Toggle word wrap 
    Stopping HTTP server, Bye bye world !
    Copy to Clipboard Toggle word wrap

    (followed by) 

    $ curl http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME/api/greeting
    Copy to Clipboard Toggle word wrap 
    Not online
    Copy to Clipboard Toggle word wrap

  3. Use oc get pods -w to continuously watch the self-healing capabilities in action.

    While invoking the service failure, you can watch the self-healing capabilities in action on OpenShift console, or with the oc client tools. You should see the number of pods in the READY state move to zero (0/1) and after a short period (less than one minute) move back up to one (1/1). In addition to that, the RESTARTS count increases every time you you invoke the service failure. 

    $ oc get pods -w
NAME                           READY     STATUS    RESTARTS   AGE
MY_APP_NAME-1-26iy7   0/1       Running   5          18m
MY_APP_NAME-1-26iy7   1/1       Running   5         19m
    Copy to Clipboard Toggle word wrap

  4. Optional: Use the web interface to invoke the service.

    Alternatively to the interaction using the terminal window, you can use the web interface provided by the service to invoke the different methods and watch the service move through the life cycle phases. 

    http://MY_APP_NAME-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME
    Copy to Clipboard Toggle word wrap

  5. Optional: Use the web console to view the log output generated by the application at each stage of the self-healing process.

    1. Navigate to your project.
    2. On the sidebar, click on Monitoring.
    3. In the upper right-hand corner of the screen, click on Events to display the log messages.
    4. Optional: Click View Details to display a detailed view of the Event log.

    The health check application generates the following messages:

    Expand
    MessageStatus

    Unhealthy

    Readiness probe failed. This message is expected and indicates that the simulated failure of the /api/greeting endpoint has been detected and the self-healing process starts.

    Killing

    The unavailable Docker container running the service is being killed before being re-created.

    Pulling

    Downloading the latest version of docker image to re-create the container.

    Pulled

    Docker image downloaded successfully.

    Created

    Docker container has been successfully created

    Started

    Docker container is ready to handle requests

This example application includes a self-contained set of integration tests. When run inside an OpenShift project, the tests:

  • Deploy a test instance of the application to the project.
  • Execute the individual tests on that instance.
  • Remove all instances of the application from the project when the testing is done.
Warning

Executing integration tests removes all existing instances of the example application from the target OpenShift project. To avoid accidentally removing your example application, ensure that you create and select a separate OpenShift project to execute the tests.

Prerequisites

  • The oc client authenticated
  • An empty OpenShift project

Procedure

Execute the following command to run the integration tests: 

$ mvn clean verify -Popenshift,openshift-it
Copy to Clipboard Toggle word wrap

7.4.7. Health check resources
复制链接

More background and related information on health checking can be found here:

7.5. Circuit Breaker example for Eclipse Vert.x
复制链接

Important

The following example is not meant to be run in a production environment.

Limitation: Run this example application on a Minishift or CDK. You can also use a manual workflow to deploy this example to OpenShift Online Pro and OpenShift Container Platform. This example is not currently available on OpenShift Online Starter.

Example proficiency level: Foundational.

The Circuit Breaker example demonstrates a generic pattern for reporting the failure of a service and then limiting access to the failed service until it becomes available to handle requests. This helps prevent cascading failure in other services that depend on the failed services for functionality.

This example shows you how to implement a Circuit Breaker and Fallback pattern in your services.

7.5.1. The circuit breaker design pattern
复制链接

The Circuit Breaker is a pattern intended to:

  • Reduce the impact of network failure and high latency on service architectures where services synchronously invoke other services.

    If one of the services:

    • becomes unavailable due to network failure, or
    • incurs unusually high latency values due to overwhelming traffic,

    other services attempting to call its endpoint may end up exhausting critical resources in an attempt to reach it, rendering themselves unusable.

  • Prevent the condition also known as cascading failure, which can render the entire microservice architecture unusable.
  • Act as a proxy between a protected function and a remote function, which monitors for failures.
  • Trip once the failures reach a certain threshold, and all further calls to the circuit breaker return an error or a predefined fallback response, without the protected call being made at all.

The Circuit Breaker usually also contain an error reporting mechanism that notifies you when the Circuit Breaker trips.

Circuit breaker implementation
  • With the Circuit Breaker pattern implemented, a service client invokes a remote service endpoint via a proxy at regular intervals.
  • If the calls to the remote service endpoint fail repeatedly and consistently, the Circuit Breaker trips, making all calls to the service fail immediately over a set timeout period and returns a predefined fallback response.

  • When the timeout period expires, a limited number of test calls are allowed to pass through to the remote service to determine whether it has healed, or remains unavailable.

    • If the test calls fail, the Circuit Breaker keeps the service unavailable and keeps returning the fallback responses to incoming calls.
    • If the test calls succeed, the Circuit Breaker closes, fully enabling traffic to reach the remote service again.

7.5.2. Circuit Breaker design tradeoffs
复制链接

Expand
Table 7.4. Design Tradeoffs
ProsCons
  • Enables a service to handle the failure of other services it invokes.

  • Optimizing the timeout values can be challenging

    • Larger-than-necessary timeout values may generate excessive latency.
    • Smaller-than-necessary timeout values may introduce false positives.

Use one of the following options to execute the Circuit Breaker example application on OpenShift Online.

Although each method uses the same oc commands to deploy your application, using developers.redhat.com/launch provides an automated deployment workflow that executes the oc commands for you.

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Red Hat Developer Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the developers.redhat.com/launch URL in a browser.
  2. Follow on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.5.3.2. Authenticating the oc CLI client
复制链接

To work with example applications on OpenShift Online using the oc command-line client, you must authenticate the client using the token provided by the OpenShift Online web interface.

Prerequisites

Procedure

  1. Navigate to the OpenShift Online URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your OpenShift Online account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Circuit Breaker example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  5. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-greeting-1-aaaaa     1/1       Running   0           17s
MY_APP_NAME-greeting-1-deploy    0/1       Completed 0           22s
MY_APP_NAME-name-1-aaaaa         1/1       Running   0           14s
MY_APP_NAME-name-1-deploy        0/1       Completed 0           28s
    Copy to Clipboard Toggle word wrap

    Both the MY_APP_NAME-greeting-1-aaaaa and MY_APP_NAME-name-1-aaaaa pods should have a status of Running once they are fully deployed and started. You should also wait for your pods to be ready before proceeding, which is shown in the READY column. For example, MY_APP_NAME-greeting-1-aaaaa is ready when the READY column is 1/1. Your specific pod names will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME-greeting   MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME            MY_APP_NAME-greeting   8080                    None
MY_APP_NAME-name       MY_APP_NAME-name-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME            MY_APP_NAME-name       8080                    None
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

Use one of the following options to execute the Circuit Breaker example application locally on Minishift or CDK:

Although each method uses the same oc commands to deploy your application, using Fabric8 Launcher provides an automated deployment workflow that executes the oc commands for you.

You need the Fabric8 Launcher tool URL and user credentials to create and deploy example applications on Minishift or CDK. This information is provided when the Minishift or CDK is started.

Prerequisites

  • The Fabric8 Launcher tool installed, configured, and running.

Procedure

  1. Navigate to the console where you started Minishift or CDK.

  2. Check the console output for the URL and user credentials you can use to access the running Fabric8 Launcher:

    Example Console Output from a Minishift or CDK Startup

    ...
-- Removing temporary directory ... OK
-- Server Information ...
   OpenShift server started.
   The server is accessible via web console at:
       https://192.168.42.152:8443

   You are logged in as:
       User:     developer
       Password: developer

   To login as administrator:
       oc login -u system:admin
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Fabric8 Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the Fabric8 Launcher URL in a browser.
  2. Follow the on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.5.4.3. Authenticating the oc CLI client
复制链接

To work with example applications on Minishift or CDK using the oc command-line client, you must authenticate the client using the token provided by the Minishift or CDK web interface.

Prerequisites

Procedure

  1. Navigate to the Minishift or CDK URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your Minishift or CDK account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Circuit Breaker example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift and to start the pod.

  5. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
MY_APP_NAME-greeting-1-aaaaa     1/1       Running   0           17s
MY_APP_NAME-greeting-1-deploy    0/1       Completed 0           22s
MY_APP_NAME-name-1-aaaaa         1/1       Running   0           14s
MY_APP_NAME-name-1-deploy        0/1       Completed 0           28s
    Copy to Clipboard Toggle word wrap

    Both the MY_APP_NAME-greeting-1-aaaaa and MY_APP_NAME-name-1-aaaaa pods should have a status of Running once they are fully deployed and started. You should also wait for your pods to be ready before proceeding, which is shown in the READY column. For example, MY_APP_NAME-greeting-1-aaaaa is ready when the READY column is 1/1. Your specific pod names will vary. The number in the middle will increase with each new build. The letters at the end are generated when the pod is created.

  6. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME-greeting   MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME            MY_APP_NAME-greeting   8080                    None
MY_APP_NAME-name       MY_APP_NAME-name-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME            MY_APP_NAME-name       8080                    None
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the application.

The process of creating and deploying example applications to OpenShift Container Platform is similar to OpenShift Online:

Prerequisites

Procedure

After you have the Eclipse Vert.x example application deployed, you have the following services running:

MY_APP_NAME-name

Exposes the following endpoints:

  • the /api/name endpoint, which returns a name when this service is working, and an error when this service is set up to demonstrate failure.
  • the /api/state endpoint, which controls the behavior of the /api/name endpoint and determines whether the service works correctly or demonstrates failure.
MY_APP_NAME-greeting

Exposes the following endpoints:

  • the /api/greeting endpoint that you can call to get a personalized greeting response.

    When you call the /api/greeting endpoint, it issues a call against the /api/name endpoint of the MY_APP_NAME-name service as part of processing your request. The call made against the /api/name endpoint is protected by the Circuit Breaker.

    If the remote endpoint is available, the name service responds with an HTTP code 200 (OK) and you receive the following greeting from the /api/greeting endpoint: 

    {"content":"Hello, World!"}
    Copy to Clipboard Toggle word wrap

    If the remote endpoint is unavailable, the name service responds with an HTTP code 500 (Internal server error) and you receive a predefined fallback response from the /api/greeting endpoint: 

    {"content":"Hello, Fallback!"}
    Copy to Clipboard Toggle word wrap

  • the /api/cb-state endpoint, which returns the state of the Circuit Breaker. The state can be:

    • open : the circuit breaker is preventing requests from reaching the failed service,
    • closed: the circuit breaker is allowing requests to reach the service.
    • half-open: the circuit breaker is allowing a request to reach the service. If the request succeeds, the state of the service is reset to closed. If the request fails, the timer is restarted.

The following steps demonstrate how to verify the availability of the service, simulate a failure and receive a fallback response.

  1. Use curl to execute a GET request against the MY_APP_NAME-greeting service. You can also use the Invoke button in the web interface to do this. 

    $ curl http://MY_APP_NAME-greeting-MY_PROJECT_NAME.LOCAL_OPENSHIFT_HOSTNAME/api/greeting
{"content":"Hello, World!"}
    Copy to Clipboard Toggle word wrap

  2. To simulate the failure of the MY_APP_NAME-name service you can:

    • use the Toggle button in the web interface.
    • scale the number of replicas of the pod running the MY_APP_NAME-name service down to 0.

    • execute an HTTP PUT request against the /api/state endpoint of the MY_APP_NAME-name service to set its state to fail. 

      $ curl -X PUT -H "Content-Type: application/json" -d '{"state": "fail"}' http://MY_APP_NAME-name-MY_PROJECT_NAME.LOCAL_OPENSHIFT_HOSTNAME/api/state
      Copy to Clipboard Toggle word wrap

  3. Invoke the /api/greeting endpoint. When several requests on the /api/name endpoint fail:

    1. the Circuit Breaker opens,
    2. the state indicator in the web interface changes from CLOSED to OPEN,

    3. the Circuit Breaker issues a fallback response when you invoke the /api/greeting endpoint: 

      $ curl http://MY_APP_NAME-greeting-MY_PROJECT_NAME.LOCAL_OPENSHIFT_HOSTNAME/api/greeting
{"content":"Hello, Fallback!"}
      Copy to Clipboard Toggle word wrap

  4. Restore the name MY_APP_NAME-name service to availability. To do this you can:

    • use the Toggle button in the web interface.
    • scale the number of replicas of the pod running the MY_APP_NAME-name service back up to 1.

    • execute an HTTP PUT request against the /api/state endpoint of the MY_APP_NAME-name service to set its state back to ok. 

      $ curl -X PUT -H "Content-Type: application/json" -d '{"state": "ok"}' http://MY_APP_NAME-name-MY_PROJECT_NAME.LOCAL_OPENSHIFT_HOSTNAME/api/state
      Copy to Clipboard Toggle word wrap

  5. Invoke the /api/greeting endpoint again. When several requests on the /api/name endpoint succeed:

    1. the Circuit Breaker closes,
    2. the state indicator in the web interface changes from OPEN to CLOSED,

    3. the Circuit Breaker issues a returns the Hello World! greeting when you invoke the /api/greeting endpoint: 

      $ curl http://MY_APP_NAME-greeting-MY_PROJECT_NAME.LOCAL_OPENSHIFT_HOSTNAME/api/greeting
{"content":"Hello, World!"}
      Copy to Clipboard Toggle word wrap

This example application includes a self-contained set of integration tests. When run inside an OpenShift project, the tests:

  • Deploy a test instance of the application to the project.
  • Execute the individual tests on that instance.
  • Remove all instances of the application from the project when the testing is done.
Warning

Executing integration tests removes all existing instances of the example application from the target OpenShift project. To avoid accidentally removing your example application, ensure that you create and select a separate OpenShift project to execute the tests.

Prerequisites

  • The oc client authenticated
  • An empty OpenShift project

Procedure

Execute the following command to run the integration tests: 

$ mvn clean verify -Popenshift,openshift-it
Copy to Clipboard Toggle word wrap

Hystrix Dashboard lets you easily monitor the health of your services in real time by aggregating Hystrix metrics data from an event stream and displaying them on one screen.

Prerequisites

  • The application deployed

Procedure

  1. Log in to your Minishift or CDK cluster. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap
  2. To access the Web console, use your browser to navigate to your Minishift or CDK URL.

  3. Navigate to the project that contains your Circuit Breaker application. 

    $ oc project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap

  4. Import the YAML template for the Hystrix Dashboard application. You can do this by clicking Add to Project, then selecting the Import YAML / JSON tab, and copying the contents of the YAML file into the text box. Alternatively, you can execute the following command: 

    $ oc create -f https://raw.githubusercontent.com/snowdrop/openshift-templates/master/hystrix-dashboard/hystrix-dashboard.yml
    Copy to Clipboard Toggle word wrap

  5. Click the Create button to create the Hystrix Dashboard application based on the template. Alternatively, you can execute the following command. 

    $ oc new-app --template=hystrix-dashboard
    Copy to Clipboard Toggle word wrap
  6. Wait for the pod containing Hystrix Dashboard to deploy.

  7. Obtain the route of your Hystrix Dashboard application. 

    $ oc get route hystrix-dashboard
NAME                HOST/PORT                                                    PATH      SERVICES            PORT      TERMINATION   WILDCARD
hystrix-dashboard   hystrix-dashboard-MY_PROJECT_NAME.LOCAL_OPENSHIFT_HOSTNAME                 hystrix-dashboard   <all>                   None
    Copy to Clipboard Toggle word wrap
  8. To access the Dashboard, open the Dashboard application route URL in your browser. Alternatively, you can navigate to the Overview screen in the Web console and click the route URL in the header above the pod containing your Hystrix Dashboard application.

  9. To use the Dashboard to monitor the MY_APP_NAME-greeting service, replace the default event stream address with the following address and click the Monitor Stream button. 

    http://MY_APP_NAME-greeting/hystrix.stream
    Copy to Clipboard Toggle word wrap

Additional resources

7.5.9. Circuit breaker resources
复制链接

Follow the links below for more background information on the design principles behind the Circuit Breaker pattern

7.6. Secured example application for Eclipse Vert.x
复制链接

Important

The following example is not meant to be run in a production environment.

Limitation: Run this example application on a Minishift or CDK. You can also use a manual workflow to deploy this example to OpenShift Online Pro and OpenShift Container Platform. This example is not currently available on OpenShift Online Starter.

Example proficiency level: Advanced.

The Secured example application secures a REST endpoint using Red Hat SSO. (This example expands on the REST API Level 0 example).

Red Hat SSO:

  • Implements the Open ID Connect protocol which is an extension of the OAuth 2.0 specification.
  • Issues access tokens to provide clients with various access rights to secured resources.

Securing an application with SSO enables you to add security to your applications while centralizing the security configuration.

Important

This example comes with Red Hat SSO pre-configured for demonstration purposes, it does not explain its principles, usage, or configuration. Before using this example, ensure that you are familiar with the basic concepts related to Red Hat SSO.

7.6.1. The Secured project structure
复制链接

The SSO example contains:

  • the sources for the Greeting service, which is the one which we are going to to secure
  • a template file (service.sso.yaml) to deploy the SSO server
  • the Keycloak adapter configuration to secure the service

7.6.2. Red Hat SSO deployment configuration
复制链接

The service.sso.yaml file in this example contains all OpenShift configuration items to deploy a pre-configured Red Hat SSO server. The SSO server configuration has been simplified for the sake of this exercise and does provide an out-of-the-box configuration, with pre-configured users and security settings. The service.sso.yaml file also contains very long lines, and some text editors, such as gedit, may have issues reading this file.

Warning

It is not recommended to use this SSO configuration in production. Specifically, the simplifications made to the example security configuration impact the ability to use it in a production environment.

Expand
Table 7.5. SSO Example Simplifications
ChangeReasonRecommendation

The default configuration includes both public and private keys in the yaml configuration files.

We did this because the end user can deploy Red Hat SSO module and have it in a usable state without needing to know the internals or how to configure Red Hat SSO.

In production, do not store private keys under source control. They should be added by the server administrator.

The configured clients accept any callback url.

To avoid having a custom configuration for each runtime, we avoid the callback verification that is required by the OAuth2 specification.

An application-specific callback URL should be provided with a valid domain name.

Clients do not require SSL/TLS and the secured applications are not exposed over HTTPS.

The examples are simplified by not requiring certificates generated for each runtime.

In production a secure application should use HTTPS rather than plain HTTP.

The token timeout has been increased to 10 minutes from the default of 1 minute.

Provides a better user experience when working with the command line examples

From a security perspective, the window an attacker would have to guess the access token is extended. It is recommended to keep this window short as it makes it much harder for a potential attacker to guess the current token.

7.6.3. Red Hat SSO realm model
复制链接

The master realm is used to secure this example. There are two pre-configured application client definitions that provide a model for command line clients and the secured REST endpoint.

There are also two pre-configured users in the Red Hat SSO master realm that can be used to validate various authentication and authorization outcomes: admin and alice.

7.6.3.1. Red Hat SSO users
复制链接

The realm model for the secured examples includes two users:

admin
The admin user has a password of admin and is the realm administrator. This user has full access to the Red Hat SSO administration console, but none of the role mappings that are required to access the secured endpoints. You can use this user to illustrate the behavior of an authenticated, but unauthorized user.
alice

The alice user has a password of password and is the canonical application user. This user will demonstrate successful authenticated and authorized access to the secured endpoints. An example representation of the role mappings is provided in this decoded JWT bearer token: 

{
  "jti": "0073cfaa-7ed6-4326-ac07-c108d34b4f82",
  "exp": 1510162193,
  "nbf": 0,
  "iat": 1510161593,
  "iss": "https://secure-sso-sso.LOCAL_OPENSHIFT_HOSTNAME/auth/realms/master",
1 

  "aud": "demoapp",
  "sub": "c0175ccb-0892-4b31-829f-dda873815fe8",
  "typ": "Bearer",
  "azp": "demoapp",
  "nonce": "90ff5d1a-ba44-45ae-a413-50b08bf4a242",
  "auth_time": 1510161591,
  "session_state": "98efb95a-b355-43d1-996b-0abcb1304352",
  "acr": "1",
  "client_session": "5962112c-2b19-461e-8aac-84ab512d2a01",
  "allowed-origins": [
    "*"
  ],
  "realm_access": {
    "roles": [
2 

      "example-admin"
    ]
  },
  "resource_access": {
3 

    "secured-example-endpoint": {
      "roles": [
        "example-admin"
4 

      ]
    },
    "account": {
      "roles": [
        "manage-account",
        "view-profile"
      ]
    }
  },
  "name": "Alice InChains",
  "preferred_username": "alice",
5 

  "given_name": "Alice",
  "family_name": "InChains",
  "email": "alice@keycloak.org"
}
Copy to Clipboard Toggle word wrap
1
The iss field corresponds to the Red Hat SSO realm instance URL that issues the token. This must be configured in the secured endpoint deployments in order for the token to be verified.
2
The roles object provides the roles that have been granted to the user at the global realm level. In this case alice has been granted the example-admin role. We will see that the secured endpoint will look to the realm level for authorized roles.
3
The resource_access object contains resource specific role grants. Under this object you will find an object for each of the secured endpoints.
4
The resource_access.secured-example-endpoint.roles object contains the roles granted to alice for the secured-example-endpoint resource.
5
The preferred_username field provides the username that was used to generate the access token.
7.6.3.2. The application clients
复制链接

The OAuth 2.0 specification allows you to define a role for application clients that access secured resources on behalf of resource owners. The master realm has the following application clients defined:

demoapp
This is a confidential type client with a client secret that is used to obtain an access token. The token contains grants for the alice user which enable alice to access the Thorntail, Eclipse Vert.x, Node.js and Spring Boot based REST example application deployments.
secured-example-endpoint
The secured-example-endpoint is a bearer-only type of client that requires a example-admin role for accessing the associated resources, specifically the Greeting service.

7.6.4. Eclipse Vert.x SSO adapter configuration
复制链接

The SSO adapter is the client side, or client to the SSO server, component that enforces security on the web resources. In this specific case, it is the greeting service.

Enacting security

router.route("/greeting")
1 

  .handler(JWTAuthHandler.create(
2 

    JWTAuth.create(vertx,
3 

      new JWTAuthOptions()
4 

            .addPubSecKey(new PubSecKeyOptions()
              .setAlgorithm("RS256")
5 

              .setPublicKey(System.getenv("REALM_PUBLIC_KEY")))
6 

            .setPermissionsClaimKey("realm_access/roles"))));
7
Copy to Clipboard Toggle word wrap

1
Locate the HTTP route to secure.
2
Instantiate a new JWT security handler.
3
The authorization enforcer is created.
4
The configuration to the enforcer.
5
Public key encryption algorithm.
6
PEM format of the realm public key. You can obtain this from the administration console.
7
Where the authorization enforcer should lookup permissions.

The enforcer here is configured using PEM format of the realm public key and specifying the algorithm. And since the enforcer is configured to consume keycloak JWTs, we also need to provide a location for the permission claims in the token.

Below is a JSON file reconstructed from the deployment environment variables, which is used when interacting with the application through web interface. 

JsonObject keycloakJson = new JsonObject()
  	.put("realm", System.getenv("REALM"))
1 

  	.put("auth-server-url", System.getenv("SSO_AUTH_SERVER_URL"))
2 

  	.put("ssl-required", "external")
  	.put("resource", System.getenv("CLIENT_ID"))
3 

  	.put("credentials", new JsonObject()
    	.put("secret", System.getenv("SECRET")));
Copy to Clipboard Toggle word wrap
1
The security realm to be used.
3
The actual keycloak client configuration.
2
The address of the Red Hat SSO server (Interpolation at build time)

You need the Fabric8 Launcher tool URL and user credentials to create and deploy example applications on Minishift or CDK. This information is provided when the Minishift or CDK is started.

Prerequisites

  • The Fabric8 Launcher tool installed, configured, and running.

Procedure

  1. Navigate to the console where you started Minishift or CDK.

  2. Check the console output for the URL and user credentials you can use to access the running Fabric8 Launcher:

    Example Console Output from a Minishift or CDK Startup

    ...
-- Removing temporary directory ... OK
-- Server Information ...
   OpenShift server started.
   The server is accessible via web console at:
       https://192.168.42.152:8443

   You are logged in as:
       User:     developer
       Password: developer

   To login as administrator:
       oc login -u system:admin
    Copy to Clipboard Toggle word wrap

Prerequisites

Procedure

  • Navigate to the Fabric8 Launcher URL in a browser.
  • Follow the on-screen instructions to create your example in Eclipse Vert.x. When asked about which deployment type, select I will build and run locally.

  • Follow on-screen instructions.

    When done, click the Download as ZIP file button and store the file on your hard drive.

7.6.5.3. Authenticating the oc CLI client
复制链接

To work with example applications on Minishift or CDK using the oc command-line client, you must authenticate the client using the token provided by the Minishift or CDK web interface.

Prerequisites

Procedure

  1. Navigate to the Minishift or CDK URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your Minishift or CDK account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Secured example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Deploy the Red Hat SSO server using the service.sso.yaml file from your example ZIP file: 

    $ oc create -f service.sso.yaml
    Copy to Clipboard Toggle word wrap

  5. Use Maven to start the deployment to Minishift or CDK. 

    $ mvn clean fabric8:deploy -Popenshift -DskipTests \
      -DSSO_AUTH_SERVER_URL=$(oc get route secure-sso -o jsonpath='{"https://"}{.spec.host}{"/auth\n"}')
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on Minishift or CDK and to start the pod.

This process generates the uberjar file as well as the OpenShift resources and deploys them to the current project on your Minishift or CDK server.

In addition to the Minishift or CDK, you can create and deploy the example on OpenShift Container Platform with only minor differences. The most important difference is that you need to create the example application on Minishift or CDK before you can deploy it with OpenShift Container Platform.

Prerequisites

7.6.6.1. Authenticating the oc CLI client
复制链接

To work with example applications on OpenShift Container Platform using the oc command-line client, you must authenticate the client using the token provided by the OpenShift Container Platform web interface.

Prerequisites

  • An account at OpenShift Container Platform.

Procedure

  1. Navigate to the OpenShift Container Platform URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your OpenShift Container Platform account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Secured example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new OpenShift project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Deploy the Red Hat SSO server using the service.sso.yaml file from your example ZIP file: 

    $ oc create -f service.sso.yaml
    Copy to Clipboard Toggle word wrap

  5. Use Maven to start the deployment to OpenShift Container Platform. 

    $ mvn clean fabric8:deploy -Popenshift -DskipTests \
      -DSSO_AUTH_SERVER_URL=$(oc get route secure-sso -o jsonpath='{"https://"}{.spec.host}{"/auth\n"}')
    Copy to Clipboard Toggle word wrap

    This command uses the Fabric8 Maven Plugin to launch the S2I process on OpenShift Container Platform and to start the pod.

This process generates the uberjar file as well as the OpenShift resources and deploys them to the current project on your OpenShift Container Platform server.

The Secured example application provides a default HTTP endpoint that accepts GET requests if the caller is authenticated and authorized. The client first authenticates against the Red Hat SSO server and then performs a GET request against the Secured example application using the access token returned by the authentication step.

When using a client to interact with the example, you must specify the Secured example application endpoint, which is the PROJECT_ID service.

Prerequisites

  • The Secured example application deployed and running.
  • The oc client authenticated.

Procedure

  1. In a terminal application, execute the oc get routes command.

    A sample output is shown in the following table:

    Example 7.1. List of Secured endpoints

    Expand
    NameHost/PortPathServicesPortTermination

    secure-sso

    secure-sso-myproject.LOCAL_OPENSHIFT_HOSTNAME

    		 

    secure-sso

    <all>

    passthrough

    PROJECT_ID

    PROJECT_ID-myproject.LOCAL_OPENSHIFT_HOSTNAME

    		 

    PROJECT_ID

    <all>

    		 

    sso

    sso-myproject.LOCAL_OPENSHIFT_HOSTNAME

    		 

    sso

    <all>

    		 

    In the above example, the example endpoint would be http://PROJECT_ID-myproject.LOCAL_OPENSHIFT_HOSTNAME. PROJECT_ID is based on the name you entered when generating your example using developers.redhat.com/launch or the Fabric8 Launcher tool.

Request a token by sending a HTTP POST request to the Red Hat SSO server. In the following example, the jq CLI tool is used to extract the token value from the JSON response.

Prerequisites

Procedure

  1. Request an access token with curl, the credentials, and <SSO_AUTH_SERVER_URL> and extract the token from the response with the jq command: 

    curl -sk -X POST https://<SSO_AUTH_SERVER_URL>/auth/realms/master/protocol/openid-connect/token \
  -d grant_type=password \
  -d username=alice\
  -d password=password \
  -d client_id=demoapp \
  -d client_secret=1daa57a2-b60e-468b-a3ac-25bd2dc2eadc \
  | jq -r '.access_token'

eyJhbGciOiJSUzI1NiIsInR5cCIgOiAiSldUIiwia2lkIiA6ICJRek1nbXhZMUhrQnpxTnR0SnkwMm5jNTNtMGNiWDQxV1hNSTU1MFo4MGVBIn0.eyJqdGkiOiI0NDA3YTliNC04YWRhLTRlMTctODQ2ZS03YjI5MjMyN2RmYTIiLCJleHAiOjE1MDc3OTM3ODcsIm5iZiI6MCwiaWF0IjoxNTA3NzkzNzI3LCJpc3MiOiJodHRwczovL3NlY3VyZS1zc28tc3NvLWRlbW8uYXBwcy5jYWZlLWJhYmUub3JnL2F1dGgvcmVhbG1zL21hc3RlciIsImF1ZCI6ImRlbW9hcHAiLCJzdWIiOiJjMDE3NWNjYi0wODkyLTRiMzEtODI5Zi1kZGE4NzM4MTVmZTgiLCJ0eXAiOiJCZWFyZXIiLCJhenAiOiJkZW1vYXBwIiwiYXV0aF90aW1lIjowLCJzZXNzaW9uX3N0YXRlIjoiMDFjOTkzNGQtNmZmOS00NWYzLWJkNWUtMTU4NDI5ZDZjNDczIiwiYWNyIjoiMSIsImNsaWVudF9zZXNzaW9uIjoiMzM3Yzk0MTYtYTdlZS00ZWUzLThjZWQtODhlODI0MGJjNTAyIiwiYWxsb3dlZC1vcmlnaW5zIjpbIioiXSwicmVhbG1fYWNjZXNzIjp7InJvbGVzIjpbImJvb3N0ZXItYWRtaW4iXX0sInJlc291cmNlX2FjY2VzcyI6eyJzZWN1cmVkLWJvb3N0ZXItZW5kcG9pbnQiOnsicm9sZXMiOlsiYm9vc3Rlci1hZG1pbiJdfSwiYWNjb3VudCI6eyJyb2xlcyI6WyJtYW5hZ2UtYWNjb3VudCIsInZpZXctcHJvZmlsZSJdfX0sIm5hbWUiOiJBbGljZSBJbkNoYWlucyIsInByZWZlcnJlZF91c2VybmFtZSI6ImFsaWNlIiwiZ2l2ZW5fbmFtZSI6IkFsaWNlIiwiZmFtaWx5X25hbWUiOiJJbkNoYWlucyIsImVtYWlsIjoiYWxpY2VAa2V5Y2xvYWsub3JnIn0.mjmZe37enHpigJv0BGuIitOj-kfMLPNwYzNd3n0Ax4Nga7KpnfytGyuPSvR4KAG8rzkfBNN9klPYdy7pJEeYlfmnFUkM4EDrZYgn4qZAznP1Wzy1RfVRdUFi0-GqFTMPb37o5HRldZZ09QljX_j3GHnoMGXRtYW9RZN4eKkYkcz9hRwgfJoTy2CuwFqeJwZYUyXifrfA-JoTr0UmSUed-0NMksGrtJjjPggUGS-qOn6OgKcmN2vaVAQlxW32y53JqUXctfLQ6DhJzIMYTmOflIPy0sgG1mG7sovQhw1xTg0vTjdx8zQ-EJcexkj7IivRevRZsslKgqRFWs67jQAFQA
    Copy to Clipboard Toggle word wrap

    <SSO_AUTH_SERVER_URL> is the url of the secure-sso service.

    The attributes, such as username, password, and client_secret are usually kept secret, but the above command uses the default provided credentials with this example for demonstration purpose.

    If you do not want to use jq to extract the token, you can run just the curl command and manually extract the access token.

    Note

    The -sk option tells curl to ignore failures resulting from self-signed certificates. Do not use this option in a production environment. On macOS, you must have curl version 7.56.1 or greater installed. It must also be built with OpenSSL.

  1. Invoke the Secured service. Attach the access (bearer) token to the HTTP headers: 

    $ curl -v -H "Authorization: Bearer <TOKEN>" http://<SERVICE_HOST>/api/greeting

{
    "content": "Hello, World!",
    "id": 2
}
    Copy to Clipboard Toggle word wrap

    Example 7.2. A sample GET Request Headers with an Access (Bearer) Token

    > GET /api/greeting HTTP/1.1
> Host: <SERVICE_HOST>
> User-Agent: curl/7.51.0
> Accept: */*
> Authorization: Bearer <TOKEN>
    Copy to Clipboard Toggle word wrap

    <SERVICE_HOST> is the URL of the secured example endpoint. For more information, see Section 7.6.7.1, “Getting the Secured example application API endpoint”.

  2. Verify the signature of the access token.

    The access token is a JSON Web Token, so you can decode it using the JWT Debugger:

    1. In a web browser, navigate to the JWT Debugger website.

    2. Select RS256 from the Algorithm drop down menu.

      Note

      Make sure the web form has been updated after you made the selection, so it displays the correct RSASHA256(…​) information in the Signature section. If it has not, try switching to HS256 and then back to RS256.

    3. Paste the following content in the topmost text box into the VERIFY SIGNATURE section: 

      -----BEGIN PUBLIC KEY-----
MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAoETnPmN55xBJjRzN/cs30OzJ9olkteLVNRjzdTxFOyRtS2ovDfzdhhO9XzUcTMbIsCOAZtSt8K+6yvBXypOSYvI75EUdypmkcK1KoptqY5KEBQ1KwhWuP7IWQ0fshUwD6jI1QWDfGxfM/h34FvEn/0tJ71xN2P8TI2YanwuDZgosdobx/PAvlGREBGuk4BgmexTOkAdnFxIUQcCkiEZ2C41uCrxiS4CEe5OX91aK9HKZV4ZJX6vnqMHmdDnsMdO+UFtxOBYZio+a1jP4W3d7J5fGeiOaXjQCOpivKnP2yU2DPdWmDMyVb67l8DRA+jh0OJFKZ5H2fNgE3II59vdsRwIDAQAB
-----END PUBLIC KEY-----
      Copy to Clipboard Toggle word wrap
      Note

      This is the master realm public key from the Red Hat SSO server deployment of the Secured example application.

    4. Paste the token output from the client output into the Encoded box.

      The Signature Verified sign is displayed on the debugger page.

In addition to the HTTP API, the secured endpoint also contains a web interface to interact with.

The following procedure is an exercise for you to see how security is enforced, how you authenticate, and how you work with the authentication token.

Prerequisites

Procedure

  1. In a web browser, navigate to the endpoint URL.

  2. Perform an unauthenticated request:

    1. Click the Invoke button.

      Figure 7.1. Unauthenticated Secured Example Web Interface

      sso main

      The services responds with an HTTP 401 Unauthorized status code.

      Figure 7.2. Unauthenticated Error Message

      sso unauthenticated

  3. Perform an authenticated request as a user:

    1. Click the Login button to authenticate against Red Hat SSO. You will be redirected to the SSO server.

    2. Log in as the Alice user. You will be redirected back to the web interface.

      Note

      You can see the access (bearer) token in the command line output at the bottom of the page.

      Figure 7.3. Authenticated Secured Example Web Interface (as Alice)

      sso alice

    3. Click Invoke again to access the Greeting service.

      Confirm that there is no exception and the JSON response payload is displayed. This means the service accepted your access (bearer) token and you are authorized access to the Greeting service.

      Figure 7.4. The Result of an Authenticated Greeting Request (as Alice)

      sso invoke alice
    4. Log out.

  4. Perform an authenticated request as an admininstrator:

    1. Click the Invoke button.

      Confirm that this sends an unauthenticated request to the Greeting service.

    2. Click the Login button and log in as the admin user.

      Figure 7.5. Authenticated Secured Example Web Interface (as admin)

      sso admin

  5. Click the Invoke button.

    The service responds with an HTTP 403 Forbidden status code because the admin user is not authorized to access the Greeting service.

    Figure 7.6. Unauthorized Error Message

    sso unauthorized

This section shows you how to execute the integration tests using a Red Hat SSO test server with a pre-configured realm and example user profiles.

Prerequisites

  • The oc client authenticated.

Procedure

 

Warning

Executing integration tests removes all existing instances of the example application from the target OpenShift project. To avoid accidentally removing your example application, ensure that you create and select a separate OpenShift project to execute the tests.

By default, the SSO server is deployed (and destroyed) as part of testing. The steps for executing integration tests are as follows:

  1. In a terminal application, navigate to the directory with your project.

  2. Execute the integration tests: 

    mvn clean verify -Popenshift,openshift-it
    Copy to Clipboard Toggle word wrap

If you deployed an SSO server beforehand, e.g. by executing oc create -f service.sso.yaml, set the system property skip.sso.init to true when running the tests: 

mvn clean verify -Popenshift,openshift-it -Dskip.sso.init=true
Copy to Clipboard Toggle word wrap

When executed like this, the tests will use the existing SSO server. The tests will not deploy their own SSO server, nor will they destroy the existing one.

7.6.9. Secured SSO resources
复制链接

Follow the links below for additional information on the principles behind the OAuth2 specification and on securing your applications using Red Hat SSO and Keycloak:

7.7. Cache example for Eclipse Vert.x
复制链接

Important

The following example is not meant to be run in a production environment.

Limitation: Run this example application on a Minishift or CDK. You can also use a manual workflow to deploy this example to OpenShift Online Pro and OpenShift Container Platform. This example is not currently available on OpenShift Online Starter.

Example proficiency level: Advanced.

The Cache example demonstrates how to use a cache to increase the response time of applications.

This example shows you how to:

  • Deploy a cache to OpenShift.
  • Use a cache within an application.

7.7.1. How caching works and when you need it
复制链接

Caches allows you to store information and access it for a given period of time. You can access information in a cache faster or more reliably than repeatedly calling the original service. A disadvantage of using a cache is that the cached information is not up to date. However, that problem can be reduced by setting an expiration or TTL (time to live) on each value stored in the cache.

Example 7.3. Caching example

Assume you have two applications: service1 and service2:

  • Service1 depends on a value from service2.

    • If the value from service2 infrequently changes, service1 could cache the value from service2 for a period of time.
    • Using cached values can also reduce the number of times service2 is called.
  • If it takes service1 500 ms to retrieve the value directly from service2, but 100 ms to retrieve the cached value, service1 would save 400 ms by using the cached value for each cached call.
  • If service1 would make uncached calls to service2 5 times per second, over 10 seconds, that would be 50 calls.
  • If service1 started using a cached value with a TTL of 1 second instead, that would be reduced to 10 calls over 10 seconds.

How the Cache example works

  1. The cache, cute name, and greeting services are deployed and exposed.
  2. User accesses the web frontend of the greeting service.
  3. User invokes the greeting HTTP API using a button on the web frontend.

  4. The greeting service depends on a value from the cute name service.

    • The greeting service first checks if that value is stored in the cache service. If it is, then the cached value is returned.
    • If the value is not cached, the greeting service calls the cute name service, returns the value, and stores the value in the cache service with a TTL of 5 seconds.
  5. The web front end displays the response from the greeting service as well as the total time of the operation.

  6. User invokes the service multiple times to see the difference between cached and uncached operations.

    • Cached operations are significantly faster than uncached operations.
    • User can force the cache to be cleared before the TTL expires.

Use one of the following options to execute the Cache example application on OpenShift Online.

Although each method uses the same oc commands to deploy your application, using developers.redhat.com/launch provides an automated deployment workflow that executes the oc commands for you.

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Red Hat Developer Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the developers.redhat.com/launch URL in a browser.
  2. Follow on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.7.2.2. Authenticating the oc CLI client
复制链接

To work with example applications on OpenShift Online using the oc command-line client, you must authenticate the client using the token provided by the OpenShift Online web interface.

Prerequisites

Procedure

  1. Navigate to the OpenShift Online URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your OpenShift Online account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Cache example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Deploy the cache service. 

    $ oc apply -f service.cache.yml
    Copy to Clipboard Toggle word wrap
    Note

    If you are using an architecture other than x86_64, in the YAML file, update the image name of Red Hat Data Grid to its relevant image name in that architecture. For example, for the s390x or ppc64le architecture, update the image name to its IBM Z or IBM Power Systems image name registry.access.redhat.com/jboss-datagrid-7/datagrid73-openj9-11-openshift-rhel8.

  5. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

  6. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
cache-server-123456789-aaaaa             1/1       Running     0          8m
MY_APP_NAME-cutename-1-bbbbb       1/1       Running     0          4m
MY_APP_NAME-cutename-s2i-1-build   0/1       Completed   0          7m
MY_APP_NAME-greeting-1-ccccc       1/1       Running     0          3m
MY_APP_NAME-greeting-s2i-1-build   0/1       Completed   0          3m
    Copy to Clipboard Toggle word wrap

    Your 3 pods should have a status of Running once they are fully deployed and started.

  7. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME-cutename   MY_APP_NAME-cutename-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME             MY_APP_NAME-cutename   8080                    None
MY_APP_NAME-greeting   MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME             MY_APP_NAME-greeting   8080                    None
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the greeting service.

Use one of the following options to execute the Cache example application locally on Minishift or CDK:

Although each method uses the same oc commands to deploy your application, using Fabric8 Launcher provides an automated deployment workflow that executes the oc commands for you.

You need the Fabric8 Launcher tool URL and user credentials to create and deploy example applications on Minishift or CDK. This information is provided when the Minishift or CDK is started.

Prerequisites

  • The Fabric8 Launcher tool installed, configured, and running.

Procedure

  1. Navigate to the console where you started Minishift or CDK.

  2. Check the console output for the URL and user credentials you can use to access the running Fabric8 Launcher:

    Example Console Output from a Minishift or CDK Startup

    ...
-- Removing temporary directory ... OK
-- Server Information ...
   OpenShift server started.
   The server is accessible via web console at:
       https://192.168.42.152:8443

   You are logged in as:
       User:     developer
       Password: developer

   To login as administrator:
       oc login -u system:admin
    Copy to Clipboard Toggle word wrap

This section shows you how to build your REST API Level 0 example application and deploy it to OpenShift from the Fabric8 Launcher web interface.

Prerequisites

Procedure

  1. Navigate to the Fabric8 Launcher URL in a browser.
  2. Follow the on-screen instructions to create and launch your example application in Eclipse Vert.x.
7.7.3.3. Authenticating the oc CLI client
复制链接

To work with example applications on Minishift or CDK using the oc command-line client, you must authenticate the client using the token provided by the Minishift or CDK web interface.

Prerequisites

Procedure

  1. Navigate to the Minishift or CDK URL in a browser.
  2. Click on the question mark icon in the top right-hand corner of the Web console, next to your user name.
  3. Select Command Line Tools in the drop-down menu.
  4. Copy the oc login command.

  5. Paste the command in a terminal. The command uses your authentication token to authenticate your oc CLI client with your Minishift or CDK account. 

    $ oc login OPENSHIFT_URL --token=MYTOKEN
    Copy to Clipboard Toggle word wrap

This section shows you how to build your Cache example application and deploy it to OpenShift from the command line.

Prerequisites

Procedure

  1. Clone your project from GitHub. 

    $ git clone git@github.com:USERNAME/MY_PROJECT_NAME.git
    Copy to Clipboard Toggle word wrap

    Alternatively, if you downloaded a ZIP file of your project, extract it. 

    $ unzip MY_PROJECT_NAME.zip
    Copy to Clipboard Toggle word wrap

  2. Create a new project. 

    $ oc new-project MY_PROJECT_NAME
    Copy to Clipboard Toggle word wrap
  3. Navigate to the root directory of your application.

  4. Deploy the cache service. 

    $ oc apply -f service.cache.yml
    Copy to Clipboard Toggle word wrap
    Note

    If you are using an architecture other than x86_64, in the YAML file, update the image name of Red Hat Data Grid to its relevant image name in that architecture. For example, for the s390x or ppc64le architecture, update the image name to its IBM Z or IBM Power Systems image name registry.access.redhat.com/jboss-datagrid-7/datagrid73-openj9-11-openshift-rhel8.

  5. Use Maven to start the deployment to OpenShift. 

    $ mvn clean fabric8:deploy -Popenshift
    Copy to Clipboard Toggle word wrap

  6. Check the status of your application and ensure your pod is running. 

    $ oc get pods -w
NAME                             READY     STATUS      RESTARTS   AGE
cache-server-123456789-aaaaa             1/1       Running     0          8m
MY_APP_NAME-cutename-1-bbbbb       1/1       Running     0          4m
MY_APP_NAME-cutename-s2i-1-build   0/1       Completed   0          7m
MY_APP_NAME-greeting-1-ccccc       1/1       Running     0          3m
MY_APP_NAME-greeting-s2i-1-build   0/1       Completed   0          3m
    Copy to Clipboard Toggle word wrap

    Your 3 pods should have a status of Running once they are fully deployed and started.

  7. After your example application is deployed and started, determine its route.

    Example Route Information

    $ oc get routes
NAME                 HOST/PORT                                                     PATH      SERVICES        PORT      TERMINATION
MY_APP_NAME-cutename   MY_APP_NAME-cutename-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME             MY_APP_NAME-cutename   8080                    None
MY_APP_NAME-greeting   MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME             MY_APP_NAME-greeting   8080                    None
    Copy to Clipboard Toggle word wrap

    The route information of a pod gives you the base URL which you use to access it. In the example above, you would use http://MY_APP_NAME-greeting-MY_PROJECT_NAME.OPENSHIFT_HOSTNAME as the base URL to access the greeting service.

The process of creating and deploying example applications to OpenShift Container Platform is similar to OpenShift Online:

Prerequisites

Procedure

Use the default web interface to interact with the unmodified Cache example application, and see how storing frequently accessed data can shorten the time needed to access your service.

Prerequisites

  • Your application deployed

Procedure

  1. Navigate to the greeting service using your browser.

  2. Click Invoke the service once.

    Notice the duration value is above 2000. Also notice the cache state has changed from No cached value to A value is cached.

  3. Wait 5 seconds and notice cache state has changed back to No cached value.

    The TTL for the cached value is set to 5 seconds. When the TTL expires, the value is no longer cached.

  4. Click Invoke the service once more to cache the value.

  5. Click Invoke the service a few more times over the course of a few seconds while cache state is A value is cached.

    Notice a significantly lower duration value since it is using a cached value. If you click Clear the cache, the cache is emptied.

This example application includes a self-contained set of integration tests. When run inside an OpenShift project, the tests:

  • Deploy a test instance of the application to the project.
  • Execute the individual tests on that instance.
  • Remove all instances of the application from the project when the testing is done.
Warning

Executing integration tests removes all existing instances of the example application from the target OpenShift project. To avoid accidentally removing your example application, ensure that you create and select a separate OpenShift project to execute the tests.

Prerequisites

  • The oc client authenticated
  • An empty OpenShift project

Procedure

Execute the following command to run the integration tests: 

$ mvn clean verify -Popenshift,openshift-it
Copy to Clipboard Toggle word wrap

7.7.7. Caching resources
复制链接

More background and related information on caching can be found here:

Appendix A. The Source-to-Image (S2I) build process
复制链接

Source-to-Image (S2I) is a build tool for generating reproducible Docker-formatted container images from online SCM repositories with application sources. With S2I builds, you can easily deliver the latest version of your application into production with shorter build times, decreased resource and network usage, improved security, and a number of other advantages. OpenShift supports multiple build strategies and input sources.

For more information, see the Source-to-Image (S2I) Build chapter of the OpenShift Container Platform documentation.

You must provide three elements to the S2I process to assemble the final container image:

  • The application sources hosted in an online SCM repository, such as GitHub.
  • The S2I Builder image, which serves as the foundation for the assembled image and provides the ecosystem in which your application is running.
  • Optionally, you can also provide environment variables and parameters that are used by S2I scripts.

The process injects your application source and dependencies into the Builder image according to instructions specified in the S2I script, and generates a Docker-formatted container image that runs the assembled application. For more information, check the S2I build requirements, build options and how builds work sections of the OpenShift Container Platform documentation.

The deployment configuration for an example application contains information related to deploying and running the application in OpenShift, such as route information or readiness probe location. The deployment configuration of an example application is stored in a set of YAML files. For examples that use the Fabric8 Maven Plugin, the YAML files are located in the src/main/fabric8/ directory. For examples using Nodeshift, the YAML files are located in the .nodeshift directory.

Important

The deployment configuration files used by the Fabric8 Maven Plugin and Nodeshift do not have to be full OpenShift resource definitions. Both Fabric8 Maven Plugin and Nodeshift can take the deployment configuration files and add some missing information to create a full OpenShift resource definition. The resource definitions generated by the Fabric8 Maven Plugin are available in the target/classes/META-INF/fabric8/ directory. The resource definitions generated by Nodeshift are available in the tmp/nodeshift/resource/ directory.

Prerequisites

  • An existing example project.
  • The oc CLI client installed.

Procedure

  1. Edit an existing YAML file or create an additional YAML file with your configuration update.

    • For example, if your example already has a YAML file with a readinessProbe configured, you could change the path value to a different available path to check for readiness: 

      spec:
  template:
    spec:
      containers:
        readinessProbe:
          httpGet:
            path: /path/to/probe
            port: 8080
            scheme: HTTP
...
      Copy to Clipboard Toggle word wrap
    • If a readinessProbe is not configured in an existing YAML file, you can also create a new YAML file in the same directory with the readinessProbe configuration.
  2. Deploy the updated version of your example using Maven or npm.

  3. Verify that your configuration updates show in the deployed version of your example. 

    $ oc export all --as-template='my-template'

apiVersion: template.openshift.io/v1
kind: Template
metadata:
  creationTimestamp: null
  name: my-template
objects:
- apiVersion: template.openshift.io/v1
  kind: DeploymentConfig
  ...
  spec:
    ...
    template:
      ...
      spec:
        containers:
          ...
          livenessProbe:
            failureThreshold: 3
            httpGet:
              path: /path/to/different/probe
              port: 8080
              scheme: HTTP
            initialDelaySeconds: 60
            periodSeconds: 30
            successThreshold: 1
            timeoutSeconds: 1
          ...
    Copy to Clipboard Toggle word wrap

Additional resources

If you updated the configuration of your application directly using the web-based console or the oc CLI client, export and add these changes to your YAML file. Use the oc export all command to show the configuration of your deployed application.

Similar to using Maven and the Fabric8 Maven Plugin from your local host to deploy an application, you can configure Jenkins to use Maven and the Fabric8 Maven Plugin to deploy an application.

Prerequisites

  • Access to an OpenShift cluster.
  • The Jenkins container image running on same OpenShift cluster.
  • A JDK and Maven installed and configured on your Jenkins server.

  • An application configured to use Maven, the Fabric8 Maven Plugin in the pom.xml, and built using a RHEL base image.

    Note

    For building and deploying your applications to OpenShift, Eclipse Vert.x 3.9 only supports builder images based on OpenJDK 8 and OpenJDK 11. Oracle JDK and OpenJDK 9 builder images are not supported.

    Example pom.xml

    <properties>
  ...
  <fabric8.generator.from>registry.access.redhat.com/redhat-openjdk-18/openjdk18-openshift:latest</fabric8.generator.from>
</properties>
    Copy to Clipboard Toggle word wrap

  • The source of the application available in GitHub.

Procedure

  1. Create a new OpenShift project for your application:

    1. Open the OpenShift Web console and log in.
    2. Click Create Project to create a new OpenShift project.
    3. Enter the project information and click Create.

  2. Ensure Jenkins has access to that project.

    For example, if you configured a service account for Jenkins, ensure that account has edit access to the project of your application.

  3. Create a new freestyle Jenkins project on your Jenkins server:

    1. Click New Item.
    2. Enter a name, choose Freestyle project, and click OK.
    3. Under Source Code Management, choose Git and add the GitHub url of your application.
    4. Under Build, choose Add build step and select Invoke top-level Maven targets.

    5. Add the following to Goals: 

      clean fabric8:deploy -Popenshift -Dfabric8.namespace=MY_PROJECT
      Copy to Clipboard Toggle word wrap

      Substitute MY_PROJECT with the name of the OpenShift project for your application.

    6. Click Save.

  4. Click Build Now from the main page of the Jenkins project to verify your application builds and deploys to the OpenShift project for your application.

    You can also verify that your application is deployed by opening the route in the OpenShift project of the application.

Next steps

  • Consider adding GITSCM polling or using the Poll SCM build trigger. These options enable builds to run every time a new commit is pushed to the GitHub repository.
  • Consider adding a build step that executes tests before deploying.

Appendix D. Additional Eclipse Vert.x resources
复制链接

Appendix E. Application development resources
复制链接

For additional information about application development with OpenShift, see:

To reduce network load and shorten the build time of your application, set up a Nexus mirror for Maven on your Minishift or CDK:

Appendix F. Proficiency levels
复制链接

Each available example teaches concepts that require certain minimum knowledge. This requirement varies by example. The minimum requirements and concepts are organized in several levels of proficiency. In addition to the levels described here, you might need additional information specific to each example.

Foundational

The examples rated at Foundational proficiency generally require no prior knowledge of the subject matter; they provide general awareness and demonstration of key elements, concepts, and terminology. There are no special requirements except those directly mentioned in the description of the example.

Advanced

When using Advanced examples, the assumption is that you are familiar with the common concepts and terminology of the subject area of the example in addition to Kubernetes and OpenShift. You must also be able to perform basic tasks on your own, for example, configuring services and applications, or administering networks. If a service is needed by the example, but configuring it is not in the scope of the example, the assumption is that you have the knowledge to properly configure it, and only the resulting state of the service is described in the documentation.

Expert

Expert examples require the highest level of knowledge of the subject matter. You are expected to perform many tasks based on feature-based documentation and manuals, and the documentation is aimed at most complex scenarios.

Appendix G. Glossary
复制链接

G.1. Product and project names
复制链接

Developer Launcher (developers.redhat.com/launch)
developers.redhat.com/launch called Developer Launcher is a stand-alone getting started experience provided by Red Hat. It helps you get started with cloud-native development on OpenShift. It contains functional example applications that you can download, build, and deploy on OpenShift.
Minishift or CDK
An OpenShift cluster running on your machine using Minishift.

G.2. Terms specific to Developer Launcher
复制链接

Example

An application specification, for example a web service with a REST API.

Examples generally do not specify which language or platform they should run on; the description only contains the intended functionality.

Example application

A language-specific implementation of a particular example on a particular runtime. Example applications are listed in an examples catalog.

For example, an example application is a web service with a REST API implemented using the Thorntail runtime.

Examples Catalog
A Git repository that contains information about example applications.
Runtime
A platform that executes an example application. For example, Thorntail or Eclipse Vert.x.

Legal Notice
复制链接

Copyright © 2021 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2026 Red Hat返回顶部