Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

Red Hat JBoss Web Server for OpenShift

Red Hat JBoss Web Server 3.1

Installing and using Red Hat JBoss Web Server for OpenShift

Red Hat Customer Content Services

Abstract

Guide to using Red Hat JBoss Web Server for OpenShift

Chapter 1. Introduction
复制链接

1.1. What is Red Hat JBoss Web Server for OpenShift?
复制链接

The Apache Tomcat 7 and Apache Tomcat 8 components of Red Hat JBoss Web Server (JWS) 3.1 are available as containerized images designed for OpenShift. Developers can use these images to build, scale, and test Java web applications for deployment across hybrid cloud environments.

Chapter 2. Before You Begin
复制链接

The differences between the JWS for OpenShift images and the regular release of JWS are:

  • The location of JWS_HOME/tomcat<version>/ inside a JWS for OpenShift image is: /opt/webserver/.
  • The JWS for OpenShift images do not contain Apache HTTP Server. All load balancing is handled by the OpenShift router, not Apache HTTP Server mod_cluster or mod_jk connectors.

Documentation for JWS functionality not specific to JWS for OpenShift images is found in the Red Hat JBoss Web Server documentation.

2.2. Version compatibility and support
复制链接

See the xPaaS table on the OpenShift Container Platform Tested Integrations page for details about OpenShift image version compatibility.

Important

The 3.1 version of JWS for OpenShift images and application templates should be used for deploying new applications.

The 3.0 version of JWS for OpenShift images and application templates are deprecated and no longer receives updates.

Chapter 3. Get Started
复制链接

3.1. Initial setup
复制链接

The instructions in this guide follow on from the OpenShift Primer, assuming a supported OpenShift configuration or a non-production OpenShift instance like that described in the OpenShift Primer.

The JWS for OpenShift images are automatically created during the installation of OpenShift, along with the other default image streams and templates.

Note

The JWS for OpenShift application templates are distributed for Tomcat 7, and Tomcat 8.

To run and configure the JWS for OpenShift images, use the OpenShift S2I process with the application template parameters and environment variables.

The S2I process for the JWS for OpenShift images works as follows:

  • If there is a Maven settings.xml file in the configuration/ source directory, it is moved to $HOME/.m2/ of the new image.

    See the Apache Maven Project website for more information on Maven and the Maven settings.xml file.

  • If there is a pom.xml file in the source repository, a Maven build is triggered using the contents of the $MAVEN_ARGS environment variable.

    By default, the package goal is used with the openshift profile, including the arguments for skipping tests (-DskipTests) and enabling the Red Hat GA repository (-Dcom.redhat.xpaas.repo.redhatga).

  • The results of a successful Maven build are copied to /opt/webserver/webapps/. This includes all WAR files from the source directory specified by the $ARTIFACT_DIR environment variable. The default value of $ARTIFACT_DIR is the target/ directory.

    Use the MAVEN_ARGS_APPEND environment variable to modify the Maven arguments.

  • All WAR files from the deployments/ source directory are copied to /opt/webserver/webapps/.
  • All files in the configuration/ source directory are copied to /opt/webserver/conf/ (excluding the Maven settings.xml file).

  • All files in the lib/ source directory are copied to /opt/webserver/lib/.

    Note

    If you want to use custom Tomcat configuration files, the file names should be the same as for a normal Tomcat installation. For example, context.xml and server.xml.

See the Artifact Repository Mirrors section for guidance on configuring the S2I process to use a custom Maven artifacts repository mirror.

Existing applications are deployed on OpenShift using the oc start-build command.

Prerequisite: An existing .war, .ear, or .jar of the application to deploy on JWS for OpenShift.

  1. Prepare the directory structure on the local file system.

    Create a source directory containing any content required by your application not included in the binary (if required, see Using the JWS for OpenShift Source-to-Image (S2I) process), then create a subdirectory deployments/: 

    $ mkdir -p <build_dir>/deployments
    Copy to Clipboard Toggle word wrap

  2. Copy the binaries (.war,.ear,.jar) to deployments/: 

    $ cp /path/to/binary/<filenames_with_extensions> <build_dir>/deployments/
    Copy to Clipboard Toggle word wrap
    Note

    Application archives in the deployments/ subdirectory of the source directory are copied to the $JWS_HOME/webapps/ directory of the image being built on OpenShift. For the application to deploy, the directory hierarchy containing the web application data must be structured correctly (see Section 3.2, “Using the JWS for OpenShift Source-to-Image (S2I) process”).

  3. Log in to the OpenShift instance: 

    $ oc login <url>
    Copy to Clipboard Toggle word wrap

  4. Create a new project if required: 

    $ oc new-project <project-name>
    Copy to Clipboard Toggle word wrap

  5. Identify the JWS for OpenShift image stream to use for your application with oc get is -n openshift: 

    $ oc get is -n openshift | grep ^jboss-webserver | cut -f1 -d ' '

jboss-webserver30-tomcat7-openshift
jboss-webserver30-tomcat8-openshift
jboss-webserver31-tomcat7-openshift
jboss-webserver31-tomcat8-openshift
    Copy to Clipboard Toggle word wrap
    Note

    The option -n openshift specifies the project to use. oc get is -n openshift retrieves (get) the image stream resources (is) from the openshift project.

  6. Create the new build configuration, specifying image stream and application name: 

    $ oc new-build --binary=true \
 --image-stream=jboss-webserver31-tomcat8-openshift \
 --name=<my-jws-on-openshift-app>
    Copy to Clipboard Toggle word wrap

  7. Instruct OpenShift to use the source directory created previously for binary input of the OpenShift image build: 

    $ oc start-build <my-jws-on-openshift-app> --from-dir=./<build_dir> --follow
    Copy to Clipboard Toggle word wrap

  8. Create a new OpenShift application based on the image: 

    $ oc new-app <my-jws-on-openshift-app>
    Copy to Clipboard Toggle word wrap

  9. Expose the service to make the application accessible to users: 

    # to check the name of the service to expose
$ oc get svc -o name

service/<my-jws-on-openshift-app>

# to expose the service
$ oc expose svc/my-jws-on-openshift-app

route "my-jws-on-openshift-app" exposed
    Copy to Clipboard Toggle word wrap

  10. Retrieve the address of the exposed route: 

    oc get routes --no-headers -o custom-columns='host:spec.host' my-jws-on-openshift-app
    Copy to Clipboard Toggle word wrap
  11. To access the application in your browser: http://<address_of_exposed_route> / <my-war-ear-jar-filename-without-extension>

The example below uses the tomcat-websocket-chat quickstart using the procedure from Section 3.2.1, “Create a JWS for OpenShift application using existing maven binaries”.

3.2.2.1. Prerequisites:
复制链接

  1. Get the WAR application archive or build the application locally.

    • Clone the source code: 

      $ git clone https://github.com/jboss-openshift/openshift-quickstarts.git
      Copy to Clipboard Toggle word wrap
    • Configure the Red Hat JBoss Middleware Maven repository,

    • Build the application: 

      $ cd openshift-quickstarts/tomcat-websocket-chat/
      Copy to Clipboard Toggle word wrap 
      $ mvn clean package

[INFO] Scanning for projects...
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building Tomcat websocket example 1.2.0.Final
[INFO] ------------------------------------------------------------------------
...
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 01:28 min
[INFO] Finished at: 2018-01-16T15:59:16+10:00
[INFO] Final Memory: 19M/271M
[INFO] ------------------------------------------------------------------------
      Copy to Clipboard Toggle word wrap

  1. Prepare the directory structure on the local file system.

    Create the source directory for the binary build on your local file system and the deployments/ subdirectory. Copy the WAR archive to deployments/: 

    [tomcat-websocket-chat]$ ls

pom.xml  README.md  src/  target/
    Copy to Clipboard Toggle word wrap 
    $ mkdir -p ocp/deployments
    Copy to Clipboard Toggle word wrap 
    $ cp target/websocket-chat.war ocp/deployments/
    Copy to Clipboard Toggle word wrap
3.2.2.2. To setup the example application on OpenShift
复制链接

  1. Log in to the OpenShift instance: 

    $ oc login <url>
    Copy to Clipboard Toggle word wrap

  2. Create a new project if required: 

    $ oc new-project jws-bin-demo
    Copy to Clipboard Toggle word wrap

  3. Identify the JWS for OpenShift image stream to use for your application with oc get is -n openshift: 

    $ oc get is -n openshift | grep ^jboss-webserver | cut -f1 -d ' '

jboss-webserver30-tomcat7-openshift
jboss-webserver30-tomcat8-openshift
jboss-webserver31-tomcat7-openshift
jboss-webserver31-tomcat8-openshift
    Copy to Clipboard Toggle word wrap

  4. Create new build configuration, specifying image stream and application name: 

    $ oc new-build --binary=true \
 --image-stream=jboss-webserver31-tomcat8-openshift \
 --name=jws-wsch-app

--> Found image 8c3b85b (4 weeks old) in image stream "openshift/jboss-webserver31-tomcat8-openshift" under tag "latest" for "jboss-webserver31-tomcat8-openshift"

    JBoss Web Server 3.1
    --------------------
    Platform for building and running web applications on JBoss Web Server 3.1 - Tomcat v8

    Tags: builder, java, tomcat8

    * A source build using binary input will be created
      * The resulting image will be pushed to image stream "jws-wsch-app:latest"
      * A binary build was created, use 'start-build --from-dir' to trigger a new build

--> Creating resources with label build=jws-wsch-app ...
    imagestream "jws-wsch-app" created
    buildconfig "jws-wsch-app" created
--> Success
    Copy to Clipboard Toggle word wrap

  5. Start the binary build. Instruct OpenShift to use source directory for the binary input for the OpenShift image build: 

    $ oc start-build jws-wsch-app --from-dir=./ocp --follow

Uploading directory "ocp" as binary input for the build ...
build "jws-wsch-app-1" started
Receiving source from STDIN as archive ...

Copying all deployments war artifacts from /home/jboss/source/deployments directory into /opt/webserver/webapps for later deployment...
'/home/jboss/source/deployments/websocket-chat.war' -> '/opt/webserver/webapps/websocket-chat.war'


Pushing image 172.30.202.111:5000/jws-bin-demo/jws-wsch-app:latest ...
Pushed 0/7 layers, 7% complete
Pushed 1/7 layers, 14% complete
Pushed 2/7 layers, 29% complete
Pushed 3/7 layers, 49% complete
Pushed 4/7 layers, 62% complete
Pushed 5/7 layers, 92% complete
Pushed 6/7 layers, 100% complete
Pushed 7/7 layers, 100% complete
Push successful
    Copy to Clipboard Toggle word wrap

  6. Create a new OpenShift application based on the image: 

    $ oc new-app jws-wsch-app

--> Found image e5f3a6b (About a minute old) in image stream "jws-bin-demo/jws-wsch-app" under tag "latest" for "jws-wsch-app"

    JBoss Web Server 3.1
    --------------------
    Platform for building and running web applications on JBoss Web Server 3.1 - Tomcat v8

    Tags: builder, java, tomcat8

    * This image will be deployed in deployment config "jws-wsch-app"
    * Ports 8080/tcp, 8443/tcp, 8778/tcp will be load balanced by service "jws-wsch-app"
      * Other containers can access this service through the hostname "jws-wsch-app"

--> Creating resources ...
    deploymentconfig "jws-wsch-app" created
    service "jws-wsch-app" created
--> Success
    Application is not exposed. You can expose services to the outside world by executing one or more of the commands below:
     'oc expose svc/jws-wsch-app'
    Run 'oc status' to view your app.
    Copy to Clipboard Toggle word wrap

  7. Expose the service to make the application accessible to users: 

    # to check the name of the service to expose
$ oc get svc -o name

service/jws-wsch-app

# to expose the service
$ oc expose svc/jws-wsch-app

route "jws-wsch-app" exposed
    Copy to Clipboard Toggle word wrap

  8. Retrieve the address of the exposed route: 

    oc get routes --no-headers -o custom-columns='host:spec.host' jws-wsch-app
    Copy to Clipboard Toggle word wrap
  9. Access the application in your browser: http://<address_of_exposed_route>/websocket-chat

For detailed instructions on creating new OpenShift applications from source code, see OpenShift.com - Creating an Application From Source Code.

Note

Before proceeding, ensure that the applications' data is structured correctly (see Section 3.2, “Using the JWS for OpenShift Source-to-Image (S2I) process”).

  1. Log in to the OpenShift instance: 

    $ oc login <url>
    Copy to Clipboard Toggle word wrap

  2. Create a new project if required: 

    $ oc new-project <project-name>
    Copy to Clipboard Toggle word wrap

  3. Identify the JWS for OpenShift image stream to use for your application with oc get is -n openshift: 

    $ oc get is -n openshift | grep ^jboss-webserver | cut -f1 -d ' '

jboss-webserver30-tomcat7-openshift
jboss-webserver30-tomcat8-openshift
jboss-webserver31-tomcat7-openshift
jboss-webserver31-tomcat8-openshift
    Copy to Clipboard Toggle word wrap

  4. Create the new OpenShift application from source code using Red Hat JBoss Web Server for OpenShift images, use the --image-stream option: 

    $ oc new-app \
 <source_code_location> \
 --image-stream=jboss-webserver31-tomcat8-openshift \
 --name=<openshift_application_name>
    Copy to Clipboard Toggle word wrap

    For Example: 

    $ oc new-app \
 https://github.com/jboss-openshift/openshift-quickstarts.git#master \
 --image-stream=jboss-webserver31-tomcat8-openshift \
 --context-dir='tomcat-websocket-chat' \
 --name=jws-wsch-app
    Copy to Clipboard Toggle word wrap

    The source code is added to the image and the source code is compiled. The build configuration and services are also created.

  5. To expose the application: 

    # to check the name of the service to expose
$ oc get svc -o name

service/<openshift_application_name>

# to expose the service
$ oc expose svc/<openshift_application_name>

route "<openshift_application_name>" exposed
    Copy to Clipboard Toggle word wrap

  6. To retrieve the address of the exposed route: 

    oc get routes --no-headers -o custom-columns='host:spec.host' <openshift_application_name>
    Copy to Clipboard Toggle word wrap
  7. To access the application in your browser: http://<address_of_exposed_route>/<java_application_name>

Chapter 4. Reference
复制链接

4.1. Source-to-Image (S2I)
复制链接

The Red Hat JBoss Web Server for OpenShift image includes S2I scripts and Maven.

A Maven repository holds build artifacts and dependencies, such as the project jars, library jars, plugins or any other project specific artifacts. It also defines locations to download artifacts from while performing the S2I build. Along with using the Maven Central Repository, some organizations also deploy a local custom repository (mirror).

Benefits of using a local mirror are:

  • Availability of a synchronized mirror, which is geographically closer and faster.
  • Greater control over the repository content.
  • Possibility to share artifacts across different teams (developers, CI), without the need to rely on public servers and repositories.
  • Improved build times.

A Maven repository manager can serve as local cache to a mirror. Assuming that the repository manager is already deployed and reachable externally at http://10.0.0.1:8080/repository/internal/, the S2I build can use this repository. To use an internal Maven repository, add the MAVEN_MIRROR_URL environment variable to the build configuration of the application.

For a new build configuration, use the --build-env option with oc new-app or oc new-build: 

$ oc new-app \
 https://github.com/jboss-openshift/openshift-quickstarts.git#master \
 --image-stream=jboss-webserver31-tomcat8-openshift \
 --context-dir='tomcat-websocket-chat' \
 --build-env MAVEN_MIRROR_URL=http://10.0.0.1:8080/repository/internal/ \
 --name=jws-wsch-app
Copy to Clipboard Toggle word wrap

For an existing build configuration:

  1. Identify the build configuration which requires the MAVEN_MIRROR_URL variable: 

    $ oc get bc -o name

buildconfig/jws
    Copy to Clipboard Toggle word wrap

  2. Add the MAVEN_MIRROR_URL environment variable to buildconfig/jws: 

    $ oc env bc/jws MAVEN_MIRROR_URL="http://10.0.0.1:8080/repository/internal/"

buildconfig "jws" updated
    Copy to Clipboard Toggle word wrap

  3. Verify the build configuration has updated: 

    $ oc env bc/jws --list

# buildconfigs jws
MAVEN_MIRROR_URL=http://10.0.0.1:8080/repository/internal/
    Copy to Clipboard Toggle word wrap
  4. Schedule a new build of the application using oc start-build
Note

During application build, Maven dependencies are download from the repository manager, instead of the default public repositories. Once the build has finished, the mirror contains all the dependencies retrieved and used during the build.

run
runs Catalina (Tomcat)
assemble
uses Maven to build the source, create package (.war) and move it to the $JWS_HOME/webapps directory.

4.1.3. JWS for OpenShift compatible environment variables
复制链接

The build configuration can be modified by including environment variables to the Source-to-Image build command (see Section 4.1.1, “Using maven artifact repository mirrors with JWS for OpenShift”). The valid environment variables for the Red Hat JBoss Web Server for OpenShift images are:

Expand

Variable Name

Description

Example Value

:leveloffset: +3

ARTIFACT_DIR

.war, .ear, and .jar files from this directory will be copied into the deployments directory.

target

HTTP_PROXY_HOST

Hostname or IP address of a HTTP proxy for Maven to use.

192.168.1.1

HTTP_PROXY_PORT

TCP Port of a HTTP proxy for Maven to use.

8080

HTTP_PROXY_USERNAME

If supplied with HTTP_PROXY_PASSWORD, use credentials for HTTP proxy.

myusername

HTTP_PROXY_PASSWORD

If supplied with HTTP_PROXY_USERNAME, use credentials for HTTP proxy.

mypassword

HTTP_PROXY_NONPROXYHOSTS

If supplied, a configured HTTP proxy will ignore these hosts (a comma-separated lists of hosts, IP addresses or domains).

*.example.net,some.example.org

MAVEN_ARGS

Overrides the arguments supplied to Maven during build.

-e -Popenshift -DskipTests -Dcom.redhat.xpaas.repo.redhatga package

MAVEN_ARGS_APPEND

Appends user arguments supplied to Maven during build.

-Dfoo=bar

MAVEN_MIRROR_URL

URL of a Maven mirror/repository manager to configure.

http://10.0.0.1:8080/repository/internal/

MAVEN_CLEAR_REPO

Optionally clear the local Maven repository after the build.

true

:leveloffset: 3

4.2. Valves on JWS for OpenShift
复制链接

You can define the following environment variables to insert the valve component into the request processing pipeline for the associated Catalina container.

Expand
Variable NameDescriptionExample ValueDefault Value

ENABLE_ACCESS_LOG

Enable the Access Log Valve to log access messages to the standard output channel.

true

false

4.3. Checking Logs
复制链接

To view the OpenShift logs or the logs provided by a running container’s console: 

$ oc logs -f <pod_name> <container_name>
Copy to Clipboard Toggle word wrap

Access logs are stored in /opt/webserver/logs/.

Legal Notice
复制链接

Copyright © 2021 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
返回顶部
Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2025 Red Hat