Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

Chapter 4. Configuring the OpenStack Integration Test Suite

4.1. Creating a Workspace
复制链接

  1. Source the credentials for the target deployment:

    • If the target is in the undercloud, source the credentials for the undercloud: 

      # source stackrc

    • If the target is in the overcloud, source the credentials for the overcloud: 

      # source overcloudrc

  2. Initialize tempest: 

    # tempest init mytempest
# cd mytempest

    This command creates a tempest workspace named mytempest.

    Run the following command to view a list of existing workspaces: 

    # tempest workspace list

  3. Generate the etc/tempest.conf file: 

    # discover-tempest-config --deployer-input ~/tempest-deployer-input.conf \
--debug --create --network-id <UUID>

    Replace UUID with the UUID of the external network.

    discover-tempest-config was formerly called config_tempest.py and takes the same parameters. It is provided by python-tempestconf which is installed as a dependency of openstack-tempest.

Note

To generate the etc/tempest.conf file for the undercloud, ensure that the region name in the tempest-deployer-input.conf file is the same as the name in the undercloud deployment. If these names do not match, update the region name in the tempest-deployer-input.conf file to match the region name of your undercloud.

To inspect the region name of your undercloud, run the following commands: 

$ source stackrc
$ openstack region list

To inspect the region name of your overcloud, run the following commands: 

$ source overcloudrc
$ openstack region list

4.2. Configuring Tempest Manually
复制链接

The discover-tempest-config command generates the tempest.conf file automatically. However, you must ensure that the tempest.conf file corresponds to the configuration of your environment.

4.2.1. Configuring Tempest Extension Lists Manually
复制链接

The default tempest.conf file contains lists of extensions for each component. Inspect the api_extensions attribute for each component in the tempest.conf file and verify that the lists of extensions correspond to your deployment.

If the extensions that are available in your deployment do not correspond to the list of extensions in the api_extensions attribute of the tempest.conf file, the component fails tempest tests. To prevent this failure, you must identify the extensions that are available in your deployment and include them in the api_extensions parameter. To get a list of Network, Compute, Volume, or Identity extensions in your deployment, run the following command: 

$ openstack extension list [--network] [--compute] [--volume] [--identity]

4.2.2. Configuring heat_plugin Manually
复制链接

Configure the heat plugin manually according to your deployment configuration. The following example contains the minimum tempest.conf configuration for heat_plugin: 

[service_available]
heat = True

[heat_plugin]
username = demo
password = ***
project_name = demo
admin_username = admin
admin_password = ****
admin_project_name = admin
auth_url = http://10.0.0.110:5000//v3
auth_version = 3
user_domain_id = default
project_domain_id = default
user_domain_name = Default
project_domain_name = Default
region = regionOne
fixed_network_name = demo_project_network
network_for_ssh = public
floating_network_name = nova
instance_type = m1.nano
minimal_instance_type = m1.micro
image_ref = 7faed41e-a56c-4971-bf48-24e4e23e69a5
minimal_image_ref = 7faed41e-a56c-4971-bf48-24e4e23e69a5

Use the openstack network list command to identify networks for the fixed_network_name, network_for_ssh, and floating_network_name parmameters.

Note

You must set heat to True in the [service_available] section of the tempest.conf file, and the user in the username attribute of the [heat_plugin] section must have the role member. For example, run the following command to add the member role to the demo user: 

$ openstack role add --user demo --project demo member

4.3. Verifying Your Tempest Configuration
复制链接

Verify your current tempest configuration: 

# tempest verify-config -o <output>

output is the output file where Tempest writes your updated configuration. This is different from your original configuration file.

4.4. Changing the Logging Configuration
复制链接

The default location for log files is the logs directory within your tempest workspace.

To change this directory, in tempest.conf, under the [DEFAULT] section, set log_dir to the desired directory: 

[DEFAULT]
log_dir = <directory>

If you have your own logging configuration file, in tempest.conf, under the [DEFAULT] section, set log_config_append to your file: 

[DEFAULT]
log_config_append = <file>

If you set the log_config_append attribute, Tempest ignores all other logging configuration in tempest.conf, including the log_dir attribute.

4.5. Configuring Microversion Tests
复制链接

The OpenStack Integration Test Suite provides stable interfaces to test the API microversions. This section contains information about implementing microversion tests using these interfaces.

First, you must configure options in the tempest.conf configuration file to specify the target microversions. Configure these options to ensure that the supported microversions correspond to the microversions used in the OpenStack cloud. You can specify a range of target microversions to run multiple microversion tests in a single Integration Test Suite operation.

For example, to limit the range of microversions for the compute service, in the [compute] section of your configuration file, assign values to the min_microversion and max_microversion parameters: 

[compute]
min_microversion = 2.14
max_microversion = latest
Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2026 Red Hat返回顶部