Chapter 6. Backing up and restoring the undercloud and control plane nodes with collocated Ceph monitors

Procedure

1. On the backup node, export the NFS directory to host the Ceph backups. Replace <IP_ADDRESS/24> with the IP address and subnet mask of the network:

   [root@backup ~]# cat >> /etc/exports << EOF
   /ceph_backups <IP_ADDRESS/24>(rw,sync,no_root_squash,no_subtree_check)
   EOF

   Copy to Clipboard Toggle word wrap

2. On the undercloud node, source the undercloud credentials and run the following script:

   # source stackrc

   Copy to Clipboard Toggle word wrap

   #! /bin/bash
   for i in `openstack server list -c Name -c Networks -f value | grep controller | awk -F'=' '{print $2}' | awk -F' ' '{print $1}'`; do ssh -q heat-admin@$i 'sudo systemctl stop ceph-mon@$(hostname -s) ceph-mgr@$(hostname -s)'; done

   Copy to Clipboard Toggle word wrap

   To verify that the ceph-mgr@controller.service container has stopped, enter the following command:

   [heat-admin@overcloud-controller-x ~]# sudo podman ps | grep ceph

   Copy to Clipboard Toggle word wrap

3. On the undercloud node, source the undercloud credentials and run the following script. Replace <BACKUP_NODE_IP_ADDRESS> with the IP address of the backup node:

   # source stackrc

   Copy to Clipboard Toggle word wrap

   #! /bin/bash
   for i in `openstack server list -c Name -c Networks -f value | grep controller | awk -F'=' '{print $2}' | awk -F' ' '{print $1}'`; do ssh -q heat-admin@$i 'sudo mkdir /ceph_backups'; done
   
   #! /bin/bash
   for i in `openstack server list -c Name -c Networks -f value | grep controller | awk -F'=' '{print $2}' | awk -F' ' '{print $1}'`; do ssh -q heat-admin@$i 'sudo mount -t nfs  <BACKUP_NODE_IP_ADDRESS>:/ceph_backups /ceph_backups'; done
   
   #! /bin/bash
   for i in `openstack server list -c Name -c Networks -f value | grep controller | awk -F'=' '{print $2}' | awk -F' ' '{print $1}'`; do ssh -q heat-admin@$i 'sudo mkdir /ceph_backups/$(hostname -s)'; done
   
   #! /bin/bash
   for i in `openstack server list -c Name -c Networks -f value | grep controller | awk -F'=' '{print $2}' | awk -F' ' '{print $1}'`; do ssh -q heat-admin@$i 'sudo tar -zcv --xattrs-include=*.* --xattrs  --xattrs-include=security.capability --xattrs-include=security.selinux --acls -f /ceph_backups/$(hostname -s)/$(hostname -s).tar.gz  /var/lib/ceph'; done

   Copy to Clipboard Toggle word wrap

4. On the node that you want to restore, complete the following tasks:

   1. Power off the node before you proceed.
   2. Restore the node with the ReaR backup file that you have created during the backup process. The file is located in the /ceph_backups directory of the backup node.
   3. From the Relax-and-Recover boot menu, select Recover <CONTROL_PLANE_NODE>, where <CONTROL_PLANE_NODE> is the name of the control plane node.

   4. At the prompt, enter the following command:

      RESCUE <CONTROL_PLANE_NODE> :~ # rear recover

      Copy to Clipboard Toggle word wrap

      When the image restoration process completes, the console displays the following message:

   Finished recovering your system
   Exiting rear recover
   Running exit tasks

   Copy to Clipboard Toggle word wrap

5. For the node that you want to restore, copy the Ceph backup from the /ceph_backups directory into the /var/lib/ceph directory:

   1. Identify the system mount points:

      RESCUE <CONTROL_PLANE_NODE>:~# df -h
      Filesystem      Size  Used Avail Use% Mounted on
      devtmpfs         16G     0   16G   0% /dev
      tmpfs            16G     0   16G   0% /dev/shm
      tmpfs            16G  8.4M   16G   1% /run
      tmpfs            16G     0   16G   0% /sys/fs/cgroup
      /dev/vda2        30G   13G   18G  41% /mnt/local

      Copy to Clipboard Toggle word wrap

      The /dev/vda2 file system is mounted on /mnt/local.

   2. Create a temporary directory:

      RESCUE <CONTROL_PLANE_NODE>:~ # mkdir /tmp/restore
      RESCUE <CONTROL_PLANE_NODE>:~ # mount -v -t nfs -o rw,noatime <BACKUP_NODE_IP_ADDRESS>:/ceph_backups /tmp/restore/

      Copy to Clipboard Toggle word wrap

   3. On the control plane node, remove the existing /var/lib/ceph directory:

      RESCUE <CONTROL_PLANE_NODE>:~ # rm -rf /mnt/local/var/lib/ceph/*

      Copy to Clipboard Toggle word wrap

   4. Restore the previous Ceph maps. Replace <CONTROL_PLANE_NODE> with the name of your control plane node:

      RESCUE <CONTROL_PLANE_NODE>:~ # tar -xvC /mnt/local/ -f /tmp/restore/<CONTROL_PLANE_NODE>/<CONTROL_PLANE_NODE>.tar.gz --xattrs --xattrs-include='*.*' var/lib/ceph

      Copy to Clipboard Toggle word wrap

   5. Verify that the files are restored:

      RESCUE <CONTROL_PLANE_NODE>:~ # ls -l
      total 0
      drwxr-xr-x 2 root 107 26 Jun 18 18:52 bootstrap-mds
      drwxr-xr-x 2 root 107 26 Jun 18 18:52 bootstrap-osd
      drwxr-xr-x 2 root 107 26 Jun 18 18:52 bootstrap-rbd
      drwxr-xr-x 2 root 107 26 Jun 18 18:52 bootstrap-rgw
      drwxr-xr-x 3 root 107 31 Jun 18 18:52 mds
      drwxr-xr-x 3 root 107 31 Jun 18 18:52 mgr
      drwxr-xr-x 3 root 107 31 Jun 18 18:52 mon
      drwxr-xr-x 2 root 107  6 Jun 18 18:52 osd
      drwxr-xr-x 3 root 107 35 Jun 18 18:52 radosgw
      drwxr-xr-x 2 root 107  6 Jun 18 18:52 tmp

      Copy to Clipboard Toggle word wrap

6. Power off the node:

   RESCUE <CONTROL_PLANE_NODE> :~ #  poweroff

   Copy to Clipboard Toggle word wrap
7. Power on the node. The node resumes its previous state.