此内容没有您所选择的语言版本。
Using the AMQ JMS Client
For Use with AMQ Clients 2.8
Abstract
Chapter 1. Overview
AMQ JMS is a Java Message Service (JMS) 2.0 client for use in messaging applications that send and receive AMQP messages.
AMQ JMS is part of AMQ Clients, a suite of messaging libraries supporting multiple languages and platforms. For an overview of the clients, see AMQ Clients Overview. For information about this release, see AMQ Clients 2.8 Release Notes.
AMQ JMS is based on the JMS implementation from Apache Qpid. For more information about the JMS API, see the JMS API reference and the JMS tutorial.
1.1. Key features
- JMS 1.1 and 2.0 compatible
- SSL/TLS for secure communication
- Flexible SASL authentication
- Automatic reconnect and failover
- Ready for use with OSGi containers
- Pure-Java implementation
Distributed tracing based on the OpenTracing standard
ImportantDistributed tracing in AMQ Clients is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process. For more information about the support scope of Red Hat Technology Preview features, see https://access.redhat.com/support/offerings/techpreview/.
AMQ JMS does not currently support distributed transactions (XA). If your application requires distributed transactions, it is recommended that you use the AMQ Core Protocol JMS client.
1.2. Supported standards and protocols
AMQ JMS supports the following industry-recognized standards and network protocols:
- Version 2.0 of the Java Message Service API
- Version 1.0 of the Advanced Message Queueing Protocol (AMQP)
- Version 1.0 of the AMQP JMS Mapping
- Versions 1.0, 1.1, 1.2, and 1.3 of the Transport Layer Security (TLS) protocol, the successor to SSL
- Simple Authentication and Security Layer (SASL) mechanisms including ANONYMOUS, PLAIN, SCRAM, EXTERNAL, and GSSAPI (Kerberos)
- Modern TCP with IPv6
1.3. Supported configurations
AMQ JMS supports the OS and language versions listed below. For more information, see Red Hat AMQ 7 Supported Configurations.
Red Hat Enterprise Linux 7 and 8 with the following JDKs:
- OpenJDK 8 and 11
- Oracle JDK 8
- IBM JDK 8
Red Hat Enterprise Linux 6 with the following JDKs:
- OpenJDK 8
- Oracle JDK 8
- IBM AIX 7.1 with IBM JDK 8
- Microsoft Windows 10 Pro with Oracle JDK 8
- Microsoft Windows Server 2012 R2 and 2016 with Oracle JDK 8
- Oracle Solaris 10 and 11 with Oracle JDK 8
AMQ JMS is supported in combination with the following AMQ components and versions:
- All versions of AMQ Broker
- All versions of AMQ Interconnect
- A-MQ 6 versions 6.2.1 and newer
1.4. Terms and concepts
This section introduces the core API entities and describes how they operate together.
Entity | Description |
---|---|
| An entry point for creating connections. |
| A channel for communication between two peers on a network. It contains sessions. |
| A context for producing and consuming messages. It contains message producers and consumers. |
| A channel for sending messages to a destination. It has a target destination. |
| A channel for receiving messages from a destination. It has a source destination. |
| A named location for messages, either a queue or a topic. |
| A stored sequence of messages. |
| A stored sequence of messages for multicast distribution. |
| An application-specific piece of information. |
AMQ JMS sends and receives messages. Messages are transferred between connected peers using message producers and consumers. Producers and consumers are established over sessions. Sessions are established over connections. Connections are created by connection factories.
A sending peer creates a producer to send messages. The producer has a destination that identifies a target queue or topic at the remote peer. A receiving peer creates a consumer to receive messages. Like the producer, the consumer has a destination that identifies a source queue or topic at the remote peer.
A destination is either a queue or a topic. In JMS, queues and topics are client-side representations of named broker entities that hold messages.
A queue implements point-to-point semantics. Each message is seen by only one consumer, and the message is removed from the queue after it is read. A topic implements publish-subscribe semantics. Each message is seen by multiple consumers, and the message remains available to other consumers after it is read.
See the JMS tutorial for more information.
1.5. Document conventions
The sudo command
In this document, sudo
is used for any command that requires root privileges. Exercise caution when using sudo
because any changes can affect the entire system. For more information about sudo
, see Using the sudo command.
File paths
In this document, all file paths are valid for Linux, UNIX, and similar operating systems (for example, /home/andrea
). On Microsoft Windows, you must use the equivalent Windows paths (for example, C:\Users\andrea
).
Variable text
This document contains code blocks with variables that you must replace with values specific to your environment. Variable text is enclosed in arrow braces and styled as italic monospace. For example, in the following command, replace <project-dir>
with the value for your environment:
$ cd <project-dir>
Chapter 2. Installation
This chapter guides you through the steps to install AMQ JMS in your environment.
2.1. Prerequisites
- You must have a subscription to access AMQ release files and repositories.
- To build programs with AMQ JMS, you must install Apache Maven.
- To use AMQ JMS, you must install Java.
2.2. Using the Red Hat Maven repository
Configure your Maven environment to download the client library from the Red Hat Maven repository.
Procedure
Add the Red Hat repository to your Maven settings or POM file. For example configuration files, see Section B.1, “Using the online repository”.
<repository> <id>red-hat-ga</id> <url>https://maven.repository.redhat.com/ga</url> </repository>
Add the library dependency to your POM file.
<dependency> <groupId>org.apache.qpid</groupId> <artifactId>qpid-jms-client</artifactId> <version>0.53.0.redhat-00001</version> </dependency>
The client is now available in your Maven project.
2.3. Installing a local Maven repository
As an alternative to the online repository, AMQ JMS can be installed to your local filesystem as a file-based Maven repository.
Procedure
- Use your subscription to download the AMQ Clients 2.8.0 JMS Maven repository .zip file.
Extract the file contents into a directory of your choosing.
On Linux or UNIX, use the
unzip
command to extract the file contents.$ unzip amq-clients-2.8.0-jms-maven-repository.zip
On Windows, right-click the .zip file and select Extract All.
-
Configure Maven to use the repository in the
maven-repository
directory inside the extracted install directory. For more information, see Section B.2, “Using a local repository”.
2.4. Installing the examples
Procedure
Use the
git clone
command to clone the source repository to a local directory namedqpid-jms
:$ git clone https://github.com/apache/qpid-jms.git qpid-jms
Change to the
qpid-jms
directory and use thegit checkout
command to switch to the0.53.0
branch:$ cd qpid-jms $ git checkout 0.53.0
The resulting local directory is referred to as <source-dir>
throughout this document.
Chapter 3. Getting started
This chapter guides you through the steps to set up your environment and run a simple messaging program.
3.1. Prerequisites
- To build the example, Maven must be configured to use the Red Hat repository or a local repository.
- You must install the examples.
-
You must have a message broker listening for connections on
localhost
. It must have anonymous access enabled. For more information, see Starting the broker. -
You must have a queue named
queue
. For more information, see Creating a queue.
3.2. Running Hello World
The Hello World example creates a connection to the broker, sends a message containing a greeting to the queue
queue, and receives it back. On success, it prints the received message to the console.
Procedure
Use Maven to build the examples by running the following command in the
<source-dir>/qpid-jms-examples
directory:$ mvn clean package dependency:copy-dependencies -DincludeScope=runtime -DskipTests
The addition of
dependency:copy-dependencies
results in the dependencies being copied into thetarget/dependency
directory.Use the
java
command to run the example.On Linux or UNIX:
$ java -cp "target/classes:target/dependency/*" org.apache.qpid.jms.example.HelloWorld
On Windows:
> java -cp "target\classes;target\dependency\*" org.apache.qpid.jms.example.HelloWorld
For example, running it on Linux results in the following output:
$ java -cp "target/classes/:target/dependency/*" org.apache.qpid.jms.example.HelloWorld Hello world!
The source code for the example is in the <source-dir>/qpid-jms-examples/src/main/java
directory. The JNDI and logging configuration is in the <source-dir>/qpid-jms-examples/src/main/resources
directory.
Chapter 4. Configuration
This chapter describes the process for binding the AMQ JMS implementation to your JMS application and setting configuration options.
JMS uses the Java Naming Directory Interface (JNDI) to register and look up API implementations and other resources. This enables you to write code to the JMS API without tying it to a particular implementation.
Configuration options are exposed as query parameters on the connection URI.
4.1. Configuring the JNDI initial context
JMS applications use a JNDI InitialContext
object obtained from an InitialContextFactory
to look up JMS objects such as the connection factory. AMQ JMS provides an implementation of the InitialContextFactory
in the org.apache.qpid.jms.jndi.JmsInitialContextFactory
class.
The InitialContextFactory
implementation is discovered when the InitialContext
object is instantiated:
javax.naming.Context context = new javax.naming.InitialContext();
To find an implementation, JNDI must be configured in your environment. There are three ways of achieving this: using a jndi.properties
file, using a system property, or using the initial context API.
Using a jndi.properties file
Create a file named jndi.properties
and place it on the Java classpath. Add a property with the key java.naming.factory.initial
.
Example: Setting the JNDI initial context factory using a jndi.properties file
java.naming.factory.initial = org.apache.qpid.jms.jndi.JmsInitialContextFactory
In Maven-based projects, the jndi.properties
file is placed in the <project-dir>/src/main/resources
directory.
Using a system property
Set the java.naming.factory.initial
system property.
Example: Setting the JNDI initial context factory using a system property
$ java -Djava.naming.factory.initial=org.apache.qpid.jms.jndi.JmsInitialContextFactory ...
Using the initial context API
Use the JNDI initial context API to set properties programatically.
Example: Setting JNDI properties programatically
Hashtable<Object, Object> env = new Hashtable<>(); env.put("java.naming.factory.initial", "org.apache.qpid.jms.jndi.JmsInitialContextFactory"); InitialContext context = new InitialContext(env);
Note that you can use the same API to set the JNDI properties for connection factories, queues, and topics.
4.2. Configuring the connection factory
The JMS connection factory is the entry point for creating connections. It uses a connection URI that encodes your application-specific configuration settings.
To set the factory name and connection URI, create a property in the format below. You can store this configuration in a jndi.properties
file or set the corresponding system property.
The JNDI property format for connection factories
connectionFactory.<lookup-name> = <connection-uri>
For example, this is how you might configure a factory named app1
:
Example: Setting the connection factory in a jndi.properties file
connectionFactory.app1 = amqp://example.net:5672?jms.clientID=backend
You can then use the JNDI context to look up your configured connection factory using the name app1
:
ConnectionFactory factory = (ConnectionFactory) context.lookup("app1");
4.3. Connection URIs
Connections are configured using a connection URI. The connection URI specifies the remote host, port, and a set of configuration options, which are set as query parameters. For more information about the available options, see Chapter 5, Configuration options.
The connection URI format
<scheme>://<host>:<port>[?<option>=<value>[&<option>=<value>...]]
The scheme is amqp
for unencrypted connections and amqps
for SSL/TLS connections.
For example, the following is a connection URI that connects to host example.net
at port 5672
and sets the client ID to backend
:
Example: A connection URI
amqp://example.net:5672?jms.clientID=backend
Failover URIs
When failover is configured, the client can reconnect to another server automatically if the connection to the current server is lost. Failover URIs have the prefix failover:
and contain a comma-separated list of connection URIs inside parentheses. Additional options are specified at the end.
The failover URI format
failover:(<connection-uri>[,<connection-uri>...])[?<option>=<value>[&<option>=<value>...]]
For example, the following is a failover URI that can connect to either of two hosts, host1
or host2
:
Example: A failover URI
failover:(amqp://host1:5672,amqp://host2:5672)?jms.clientID=backend
As with the connection URI example, the client can be configured with a number of different settings using the URI in a failover configuration. These settings are detailed in Chapter 5, Configuration options, with the Section 5.5, “Failover options” section being of particular interest.
SSL/TLS Server Name Indication
When the amqps
scheme is used to specify an SSL/TLS connection, the host segment from the URI can be used by the JVM’s TLS Server Name Indication (SNI) extension to communicate the desired server hostname during a TLS handshake. The SNI extension is automatically included if a fully qualified domain name (for example, "myhost.mydomain") is specified, but not when an unqualified name (for example, "myhost") or a bare IP address is used.
4.4. Configuring queue and topic names
JMS provides the option of using JNDI to look up deployment-specific queue and topic resources.
To set queue and topic names in JNDI, create properties in the following format. Either place this configuration in a jndi.properties
file or set corresponding system properties.
The JNDI property format for queues and topics
queue.<lookup-name> = <queue-name> topic.<lookup-name> = <topic-name>
For example, the following properties define the names jobs
and notifications
for two deployment-specific resources:
Example: Setting queue and topic names in a jndi.properties file
queue.jobs = app1/work-items topic.notifications = app1/updates
You can then look up the resources by their JNDI names:
Queue queue = (Queue) context.lookup("jobs"); Topic topic = (Topic) context.lookup("notifications");
4.5. Variable expansion in JNDI properties
JNDI property values can contain variables of the form ${<variable-name>}
. The library resolves the variable value by searching in order in the following locations:
- Java system properties
- OS environment variables
- The JNDI properties file or environment Hashtable
For example, on Linux ${HOME}
resolves to the HOME
environment variable, the current user’s home directory.
A default value can be supplied using the syntax ${<variable-name>:-<default-value>}
. If no value for <variable-name>
is found, the default value is used instead.
Chapter 5. Configuration options
This chapter lists the available configuration options for AMQ JMS.
JMS configuration options are set as query parameters on the connection URI. For more information, see Section 4.3, “Connection URIs”.
5.1. JMS options
These options control the behaviour of JMS objects such as Connection
, Session
, MessageConsumer
, and MessageProducer
.
- jms.username
- The user name the client uses to authenticate the connection.
- jms.password
- The password the client uses to authenticate the connection.
- jms.clientID
- The client ID that the client applies to the connection.
- jms.forceAsyncSend
-
If enabled, all messages from a
MessageProducer
are sent asynchronously. Otherwise, only certain kinds, such as non-persistent messages or those inside a transaction, are sent asynchronously. It is disabled by default. - jms.forceSyncSend
-
If enabled, all messages from a
MessageProducer
are sent synchronously. It is disabled by default. - jms.forceAsyncAcks
- If enabled, all message acknowledgments are sent asynchronously. It is disabled by default.
- jms.localMessageExpiry
-
If enabled, any expired messages received by a
MessageConsumer
are filtered out and not delivered. It is enabled by default. - jms.localMessagePriority
- If enabled, prefetched messages are reordered locally based on their message priority value. It is disabled by default.
- jms.validatePropertyNames
- If enabled, message property names are required to be valid Java identifiers. It is enabled by default.
- jms.receiveLocalOnly
-
If enabled, calls to
receive
with a timeout argument check a consumer’s local message buffer only. Otherwise, if the timeout expires, the remote peer is checked to ensure there are really no messages. It is disabled by default. - jms.receiveNoWaitLocalOnly
-
If enabled, calls to
receiveNoWait
check a consumer’s local message buffer only. Otherwise, the remote peer is checked to ensure there are really no messages available. It is disabled by default. - jms.queuePrefix
-
An optional prefix value added to the name of any
Queue
created from aSession
. - jms.topicPrefix
-
An optional prefix value added to the name of any
Topic
created from aSession
. - jms.closeTimeout
- The time in milliseconds for which the client waits for normal resource closure before returning. The default is 60000 (60 seconds).
- jms.connectTimeout
- The time in milliseconds for which the client waits for connection establishment before returning with an error. The default is 15000 (15 seconds).
- jms.sendTimeout
- The time in milliseconds for which the client waits for completion of a synchronous message send before returning an error. By default the client waits indefinitely for a send to complete.
- jms.requestTimeout
- The time in milliseconds for which the client waits for completion of various synchronous interactions like opening a producer or consumer (excluding send) with the remote peer before returning an error. By default the client waits indefinitely for a request to complete.
- jms.clientIDPrefix
-
An optional prefix value used to generate client ID values when a new
Connection
is created by theConnectionFactory
. The default isID:
. - jms.connectionIDPrefix
-
An optional prefix value used to generate connection ID values when a new
Connection
is created by theConnectionFactory
. This connection ID is used when logging some information from theConnection
object, so a configurable prefix can make breadcrumbing the logs easier. The default isID:
. - jms.populateJMSXUserID
-
If enabled, populate the
JMSXUserID
property for each sent message using the authenticated user name from the connection. It is disabled by default. - jms.awaitClientID
- If enabled, a connection with no client ID configured in the URI waits for a client ID to be set programmatically, or for confirmation that none can be set, before sending the AMQP connection "open". It is enabled by default.
- jms.useDaemonThread
- If enabled, a connection uses a daemon thread for its executor, rather than a non-daemon thread. It is disabled by default.
- jms.tracing
-
The name of a tracing provider. Supported values are
opentracing
andnoop
. The default isnoop
.
Prefetch policy options
Prefetch policy determines how many messages each MessageConsumer
fetches from the remote peer and holds in a local "prefetch" buffer.
- jms.prefetchPolicy.queuePrefetch
- The default is 1000.
- jms.prefetchPolicy.topicPrefetch
- The default is 1000.
- jms.prefetchPolicy.queueBrowserPrefetch
- The default is 1000.
- jms.prefetchPolicy.durableTopicPrefetch
- The default is 1000.
- jms.prefetchPolicy.all
- This can be used to set all prefetch values at once.
The value of prefetch can affect the distribution of messages to multiple consumers on a queue or shared subscription. A higher value can result in larger batches sent at once to each consumer. To achieve more even round-robin distribution, use a lower value.
Redelivery policy options
Redelivery policy controls how redelivered messages are handled on the client.
- jms.redeliveryPolicy.maxRedeliveries
- Controls when an incoming message is rejected based on the number of times it has been redelivered. A value of 0 indicates that no message redeliveries are accepted. A value of 5 allows a message to be redelivered five times, and so on. The default is -1, meaning no limit.
- jms.redeliveryPolicy.outcome
-
Controls the outcome applied to a message once it has exceeded the configured maxRedeliveries value. Supported values are:
ACCEPTED
,REJECTED
,RELEASED
,MODIFIED_FAILED
andMODIFIED_FAILED_UNDELIVERABLE
. The default value isMODIFIED_FAILED_UNDELIVERABLE
.
Message ID policy options
Message ID policy controls the data type of the message ID assigned to messages sent from the client.
- jms.messageIDPolicy.messageIDType
-
By default, a generated
String
value is used for the message ID on outgoing messages. Other available types areUUID
,UUID_STRING
, andPREFIXED_UUID_STRING
.
Presettle policy options
Presettle policy controls when a producer or consumer instance is configured to use AMQP presettled messaging semantics.
- jms.presettlePolicy.presettleAll
- If enabled, all producers and non-transacted consumers created operate in presettled mode. It is disabled by default.
- jms.presettlePolicy.presettleProducers
- If enabled, all producers operate in presettled mode. It is disabled by default.
- jms.presettlePolicy.presettleTopicProducers
-
If enabled, any producer that is sending to a
Topic
orTemporaryTopic
destination operates in presettled mode. It is disabled by default. - jms.presettlePolicy.presettleQueueProducers
-
If enabled, any producer that is sending to a
Queue
orTemporaryQueue
destination operates in presettled mode. It is disabled by default. - jms.presettlePolicy.presettleTransactedProducers
-
If enabled, any producer that is created in a transacted
Session
operates in presettled mode. It is disabled by default. - jms.presettlePolicy.presettleConsumers
- If enabled, all consumers operate in presettled mode. It is disabled by default.
- jms.presettlePolicy.presettleTopicConsumers
-
If enabled, any consumer that is receiving from a
Topic
orTemporaryTopic
destination operates in presettled mode. It is disabled by default. - jms.presettlePolicy.presettleQueueConsumers
-
If enabled, any consumer that is receiving from a
Queue
orTemporaryQueue
destination operates in presettled mode. It is disabled by default.
Deserialization policy options
Deserialization policy provides a means of controlling which Java types are trusted to be deserialized from the object stream while retrieving the body from an incoming ObjectMessage
composed of serialized Java Object
content. By default all types are trusted during an attempt to deserialize the body. The default deserialization policy provides URI options that allow specifying a whitelist and a blacklist of Java class or package names.
- jms.deserializationPolicy.whiteList
-
A comma-separated list of class and package names that should be allowed when deserializing the contents of an
ObjectMessage
, unless overridden byblackList
. The names in this list are not pattern values. The exact class or package name must be configured, as injava.util.Map
orjava.util
. Package matches include sub-packages. The default is to allow all. - jms.deserializationPolicy.blackList
-
A comma-separated list of class and package names that should be rejected when deserializing the contents of a
ObjectMessage
. The names in this list are not pattern values. The exact class or package name must be configured, as injava.util.Map
orjava.util
. Package matches include sub-packages. The default is to prevent none.
5.2. TCP options
When connected to a remote server using plain TCP, the following options specify the behavior of the underlying socket. These options are appended to the connection URI along with any other configuration options.
Example: A connection URI with transport options
amqp://localhost:5672?jms.clientID=foo&transport.connectTimeout=30000
The complete set of TCP transport options is listed below.
- transport.sendBufferSize
- The send buffer size in bytes. The default is 65536 (64 KiB).
- transport.receiveBufferSize
- The receive buffer size in bytes. The default is 65536 (64 KiB).
- transport.trafficClass
- The default is 0.
- transport.connectTimeout
- The default is 60 seconds.
- transport.soTimeout
- The default is -1.
- transport.soLinger
- The default is -1.
- transport.tcpKeepAlive
- The default is false.
- transport.tcpNoDelay
- If enabled, do not delay and buffer TCP sends. It is enabled by default.
- transport.useEpoll
- When available, use the native epoll IO layer instead of the NIO layer. This can improve performance. It is enabled by default.
5.3. SSL/TLS options
The SSL/TLS transport is enabled by using the amqps
URI scheme. Because the SSL/TLS transport extends the functionality of the TCP-based transport, all of the TCP transport options are valid on an SSL/TLS transport URI.
Example: A simple SSL/TLS connection URI
amqps://myhost.mydomain:5671
The complete set of SSL/TLS transport options is listed below.
- transport.keyStoreLocation
-
The path to the SSL/TLS key store. If unset, the value of the
javax.net.ssl.keyStore
system property is used. - transport.keyStorePassword
-
The password for the SSL/TLS key store. If unset, the value of the
javax.net.ssl.keyStorePassword
system property is used. - transport.trustStoreLocation
-
The path to the SSL/TLS trust store. If unset, the value of the
javax.net.ssl.trustStore
system property is used. - transport.trustStorePassword
-
The password for the SSL/TLS trust store. If unset, the value of the
javax.net.ssl.trustStorePassword
system property is used. - transport.keyStoreType
-
If unset, the value of the
javax.net.ssl.keyStoreType
system property is used. If the system property is unset, the default isJKS
. - transport.trustStoreType
-
If unset, the value of the
javax.net.ssl.trustStoreType
system property is used. If the system property is unset, the default isJKS
. - transport.storeType
-
Sets both
keyStoreType
andtrustStoreType
to the same value. If unset,keyStoreType
andtrustStoreType
default to the values specified above. - transport.contextProtocol
-
The protocol argument used when getting an SSLContext. The default is
TLS
, orTLSv1.2
if using OpenSSL. - transport.enabledCipherSuites
- A comma-separated list of cipher suites to enable. If unset, the context-default ciphers are used. Any disabled ciphers are removed from this list.
- transport.disabledCipherSuites
- A comma-separated list of cipher suites to disable. Ciphers listed here are removed from the enabled ciphers.
- transport.enabledProtocols
- A comma-separated list of protocols to enable. If unset, the context-default protocols are used. Any disabled protocols are removed from this list.
- transport.disabledProtocols
-
A comma-separated list of protocols to disable. Protocols listed here are removed from the enabled protocol list. The default is
SSLv2Hello,SSLv3
. - transport.trustAll
- If enabled, trust the provided server certificate implicitly, regardless of any configured trust store. It is disabled by default.
- transport.verifyHost
- If enabled, verify that the connection hostname matches the provided server certificate. It is enabled by default.
- transport.keyAlias
- The alias to use when selecting a key pair from the key store if required to send a client certificate to the server.
- transport.useOpenSSL
If enabled, use native OpenSSL libraries for SSL/TLS connections if available. It is disabled by default.
For more information, see Section 7.1, “Enabling OpenSSL support”.
5.4. AMQP options
The following options apply to aspects of behavior related to the AMQP wire protocol.
- amqp.idleTimeout
- The time in milliseconds after which the connection is failed if the peer sends no AMQP frames. The default is 60000 (1 minute).
- amqp.vhost
- The virtual host to connect to. This is used to populate the SASL and AMQP hostname fields. The default is the main hostname from the connection URI.
- amqp.saslLayer
- If enabled, SASL is used when establishing connections. It is enabled by default.
- amqp.saslMechanisms
- A comma-separated list of SASL mechanisms the client should allow selection of, if offered by the server and usable with the configured credentials. The supported mechanisms are EXTERNAL, SCRAM-SHA-256, SCRAM-SHA-1, CRAM-MD5, PLAIN, ANONYMOUS, and GSSAPI for Kerberos. The default is to allow selection from all mechanisms except GSSAPI, which must be explicitly included here to enable.
- amqp.maxFrameSize
- The maximum AMQP frame size in bytes allowed by the client. This value is advertised to the remote peer. The default is 1048576 (1 MiB).
- amqp.drainTimeout
- The time in milliseconds that the client waits for a response from the remote peer when a consumer drain request is made. If no response is seen in the allotted timeout period, the link is considered failed and the associated consumer is closed. The default is 60000 (1 minute).
- amqp.allowNonSecureRedirects
- If enabled, allow AMQP redirects to alternative hosts when the existing connection is secure and the alternative connection is not. For example, if enabled this would permit redirecting an SSL/TLS connection to a raw TCP connection. It is disabled by default.
5.5. Failover options
Failover URIs start with the prefix failover:
and contain a comma-separated list of connection URIs inside parentheses. Additional options are specified at the end. Options prefixed with jms.
are applied to the overall failover URI, outside of parentheses, and affect the Connection
object for its lifetime.
Example: A failover URI with failover options
failover:(amqp://host1:5672,amqp://host2:5672)?jms.clientID=foo&failover.maxReconnectAttempts=20
The individual broker details within the parentheses can use the transport.
or amqp.
options defined earlier. These are applied as each host is connected to.
Example: A failover URI with per-connection transport and AMQP options
failover:(amqp://host1:5672?amqp.option=value,amqp://host2:5672?transport.option=value)?jms.clientID=foo
All of the configuration options for failover are listed below.
- failover.initialReconnectDelay
- The time in milliseconds the client waits before the first attempt to reconnect to a remote peer. The default is 0, meaning the first attempt happens immediately.
- failover.reconnectDelay
- The time in milliseconds between reconnection attempts. If the backoff option is not enabled, this value remains constant. The default is 10.
- failover.maxReconnectDelay
- The maximum time that the client waits before attempting to reconnect. This value is only used when the backoff feature is enabled to ensure that the delay does not grow too large. The default is 30 seconds.
- failover.useReconnectBackOff
- If enabled, the time between reconnection attempts grows based on a configured multiplier. It is enabled by default.
- failover.reconnectBackOffMultiplier
- The multiplier used to grow the reconnection delay value. The default is 2.0.
- failover.maxReconnectAttempts
- The number of reconnection attempts allowed before reporting the connection as failed to the client. The default is -1, meaning no limit.
- failover.startupMaxReconnectAttempts
-
For a client that has never connected to a remote peer before, this option controls how many attempts are made to connect before reporting the connection as failed. If unset, the value of
maxReconnectAttempts
is used. - failover.warnAfterReconnectAttempts
- The number of failed reconnection attempts until a warning is logged. The default is 10.
- failover.randomize
- If enabled, the set of failover URIs is randomly shuffled before attempting to connect to one of them. This can help to distribute client connections more evenly across multiple remote peers. It is disabled by default.
- failover.amqpOpenServerListAction
-
Controls how the failover transport behaves when the connection "open" frame from the server provides a list of failover hosts to the client. Valid values are
REPLACE
,ADD
, orIGNORE
. IfREPLACE
is configured, all failover URIs other than the one for the current server are replaced with those provided by the server. IfADD
is configured, the URIs provided by the server are added to the existing set of failover URIs, with deduplication. IfIGNORE
is configured, any updates from the server are ignored and no changes are made to the set of failover URIs in use. The default isREPLACE
.
The failover URI also supports defining nested options as a means of specifying AMQP and transport option values applicable to all the individual nested broker URIs. This is accomplished using the same transport.
and amqp.
URI options outlined earlier for a non-failover broker URI but prefixed with failover.nested.
. For example, to apply the same value for the amqp.vhost
option to every broker connected to you might have a URI like the following:
Example: A failover URI with shared transport and AMQP options
failover:(amqp://host1:5672,amqp://host2:5672)?jms.clientID=foo&failover.nested.amqp.vhost=myhost
5.6. Discovery options
The client has an optional discovery module that provides a customized failover layer where the broker URIs to connect to are not given in the initial URI but instead are discovered by interacting with a discovery agent. There are currently two discovery agent implementations: a file watcher that loads URIs from a file and a multicast listener that works with ActiveMQ 5.x brokers that are configured to broadcast their broker addresses for listening clients.
The general set of failover-related options when using discovery are the same as those detailed earlier, with the main prefix changed from failover.
to discovery.
, and with the nested
prefix used to supply URI options common to all the discovered broker URIs. For example, without the agent URI details, a general discovery URI might look like the following:
Example: A discovery URI
discovery:(<agent-uri>)?discovery.maxReconnectAttempts=20&discovery.discovered.jms.clientID=foo
To use the file watcher discovery agent, create an agent URI like the following:
Example: A discovery URI using the file watcher agent
discovery:(file:///path/to/monitored-file?updateInterval=60000)
The URI options for the file watcher discovery agent are listed below.
- updateInterval
- The time in milliseconds between checks for file changes. The default is 30000 (30 seconds).
To use the multicast discovery agent with an ActiveMQ 5.x broker, create an agent URI like the following:
Example: A discovery URI using the multicast listener agent
discovery:(multicast://default?group=default)
Note that the use of default
as the host in the multicast agent URI above is a special value that is substituted by the agent with the default 239.255.2.3:6155
. You can change this to specify the actual IP address and port in use with your multicast configuration.
The URI option for the multicast discovery agent is listed below.
- group
-
The multicast group used to listen for updates. The default is
default
.
Chapter 6. Examples
This chapter demonstrates the use of AMQ JMS through example programs.
For more examples, see the AMQ JMS example suite and the Qpid JMS examples.
6.1. Configuring the JNDI context
Applications using JMS typically use JNDI to obtain the ConnectionFactory
and Destination
objects used by the application. This keeps the configuration separate from the program and insulates it from the particular client implementation.
For the purpose of using these examples, a file named jndi.properties
should be placed on the classpath to configure the JNDI context, as detailed previously.
The contents of the jndi.properties
file should match what is shown below, which establishes that the client’s InitialContextFactory
implementation should be used, configures a ConnectionFactory
to connect to a local server, and defines a destination queue named queue
.
# Configure the InitialContextFactory class to use java.naming.factory.initial = org.apache.qpid.jms.jndi.JmsInitialContextFactory # Configure the ConnectionFactory connectionfactory.myFactoryLookup = amqp://localhost:5672 # Configure the destination queue.myDestinationLookup = queue
6.2. Sending messages
This example first creates a JNDI Context
, uses it to look up a ConnectionFactory
and Destination
, creates and starts a Connection
using the factory, and then creates a Session
. Then a MessageProducer
is created to the Destination
, and a message is sent using it. The Connection
is then closed, and the program exits.
A runnable variant of this Sender
example is in the <source-dir>/qpid-jms-examples
directory, along with the Hello World example covered previously in Chapter 3, Getting started.
Example: Sending messages
package org.jboss.amq.example; import javax.jms.Connection; import javax.jms.ConnectionFactory; import javax.jms.DeliveryMode; import javax.jms.Destination; import javax.jms.ExceptionListener; import javax.jms.JMSException; import javax.jms.Message; import javax.jms.MessageProducer; import javax.jms.Session; import javax.jms.TextMessage; import javax.naming.Context; import javax.naming.InitialContext; public class Sender { public static void main(String[] args) throws Exception { try { Context context = new InitialContext(); 1 ConnectionFactory factory = (ConnectionFactory) context.lookup("myFactoryLookup"); Destination destination = (Destination) context.lookup("myDestinationLookup"); 2 Connection connection = factory.createConnection("<username>", "<password>"); connection.setExceptionListener(new MyExceptionListener()); connection.start(); 3 Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE); 4 MessageProducer messageProducer = session.createProducer(destination); 5 TextMessage message = session.createTextMessage("Message Text!"); 6 messageProducer.send(message, DeliveryMode.NON_PERSISTENT, Message.DEFAULT_PRIORITY, Message.DEFAULT_TIME_TO_LIVE); 7 connection.close(); 8 } catch (Exception exp) { System.out.println("Caught exception, exiting."); exp.printStackTrace(System.out); System.exit(1); } } private static class MyExceptionListener implements ExceptionListener { @Override public void onException(JMSException exception) { System.out.println("Connection ExceptionListener fired, exiting."); exception.printStackTrace(System.out); System.exit(1); } } }
- 1
- Creates the JNDI
Context
to look upConnectionFactory
andDestination
objects. The configuration is picked up from thejndi.properties
file as detailed earlier. - 2
- The ConnectionFactory and Destination objects are retrieved from the JNDI Context using their lookup names.
- 3
- The factory is used to create the
Connection
, which then has anExceptionListener
registered and is then started. The credentials given when creating the connection will typically be taken from an appropriate external configuration source, ensuring they remain separate from the application itself and can be updated independently. - 4
- A non-transacted, auto-acknowledge
Session
is created on theConnection
. - 5
- The
MessageProducer
is created to send messages to theDestination
. - 6
- A
TextMessage
is created with the given content. - 7
- The
TextMessage
is sent. It is sent non-persistent, with default priority and no expiration. - 8
- The
Connection
is closed. TheSession
andMessageProducer
are closed implicitly.
Note that this is only an example. A real-world application would typically use a long-lived MessageProducer and send many messages using it over time. Opening and then closing a Connection
, Session
, and MessageProducer
per message is generally not efficient.
6.3. Receiving messages
This example starts by creating a JNDI Context, using it to look up a ConnectionFactory
and Destination
, creating and starting a Connection
using the factory, and then creates a Session
. Then a MessageConsumer
is created for the Destination
, a message is received using it, and its contents are printed to the console. The Connection is then closed and the program exits. The same JNDI configuration is used as in the sending example.
An executable variant of this Receiver
example is contained within the examples directory of the client distribution, along with the Hello World example covered previously in Chapter 3, Getting started.
Example: Receiving messages
package org.jboss.amq.example; import javax.jms.Connection; import javax.jms.ConnectionFactory; import javax.jms.Destination; import javax.jms.ExceptionListener; import javax.jms.JMSException; import javax.jms.Message; import javax.jms.MessageConsumer; import javax.jms.Session; import javax.jms.TextMessage; import javax.naming.Context; import javax.naming.InitialContext; public class Receiver { public static void main(String[] args) throws Exception { try { Context context = new InitialContext(); 1 ConnectionFactory factory = (ConnectionFactory) context.lookup("myFactoryLookup"); Destination destination = (Destination) context.lookup("myDestinationLookup"); 2 Connection connection = factory.createConnection("<username>", "<password>"); connection.setExceptionListener(new MyExceptionListener()); connection.start(); 3 Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE); 4 MessageConsumer messageConsumer = session.createConsumer(destination); 5 Message message = messageConsumer.receive(5000); 6 if (message == null) { 7 System.out.println("A message was not received within given time."); } else { System.out.println("Received message: " + ((TextMessage) message).getText()); } connection.close(); 8 } catch (Exception exp) { System.out.println("Caught exception, exiting."); exp.printStackTrace(System.out); System.exit(1); } } private static class MyExceptionListener implements ExceptionListener { @Override public void onException(JMSException exception) { System.out.println("Connection ExceptionListener fired, exiting."); exception.printStackTrace(System.out); System.exit(1); } } }
- 1
- Creates the JNDI
Context
to look upConnectionFactory
andDestination
objects. The configuration is picked up from thejndi.properties
file as detailed earlier. - 2
- The
ConnectionFactory
andDestination
objects are retrieved from the JNDIContext
using their lookup names. - 3
- The factory is used to create the
Connection
, which then has anExceptionListener
registered and is then started. The credentials given when creating the connection will typically be taken from an appropriate external configuration source, ensuring they remain separate from the application itself and can be updated independently. - 4
- A non-transacted, auto-acknowledge
Session
is created on theConnection
. - 5
- The
MessageConsumer
is created to receive messages from theDestination
. - 6
- A call to receive a message is made with a five second timeout.
- 7
- The result is checked, and if a message was received, its contents are printed, or notice that no message was received. The result is cast explicitly to
TextMessage
as this is what we know theSender
sent. - 8
- The
Connection
is closed. TheSession
andMessageConsumer
are closed implicitly.
Note that this is only an example. A real-world application would typically use a long-lived MessageConsumer
and receive many messages using it over time. Opening and then closing a Connection
, Session
, and MessageConsumer
for each message is generally not efficient.
Chapter 7. Security
AMQ JMS has a range of security-related configuration options that can be leveraged according to your application’s needs.
Basic user credentials such as username and password should be passed directly to the ConnectionFactory
when creating the Connection
within the application. However, if you are using the no-argument factory method, it is also possible to supply user credentials in the connection URI. For more information, see the Section 5.1, “JMS options” section.
Another common security consideration is use of SSL/TLS. The client connects to servers over an SSL/TLS transport when the amqps
URI scheme is specified in the connection URI, with various options available to configure behavior. For more information, see the Section 5.3, “SSL/TLS options” section.
In concert with the earlier items, it may be desirable to restrict the client to allow use of only particular SASL mechanisms from those that may be offered by a server, rather than selecting from all it supports. For more information, see the Section 5.4, “AMQP options” section.
Applications calling getObject()
on a received ObjectMessage
may wish to restrict the types created during deserialization. Note that message bodies composed using the AMQP type system do not use the ObjectInputStream
mechanism and therefore do not require this precaution. For more information, see the the section called “Deserialization policy options” section.
7.1. Enabling OpenSSL support
SSL/TLS connections can be configured to use a native OpenSSL implementation for improved performance. To use OpenSSL, the transport.useOpenSSL
option must be enabled, and an OpenSSL support library must be available on the classpath.
To use the system-installed OpenSSL libraries on Red Hat Enterprise Linux, install the openssl
and apr
RPM packages and add the following dependency to your POM file:
Example: Adding native OpenSSL support
<dependency> <groupId>io.netty</groupId> <artifactId>netty-tcnative</artifactId> <version>2.0.31.Final-redhat-00001</version> <classifier>linux-x86_64-fedora</classifier> </dependency>
A list of OpenSSL library implementations is available from the Netty project.
7.2. Authenticating using Kerberos
The client can be configured to authenticate using Kerberos when used with an appropriately configured server. To enable Kerberos, use the following steps.
Configure the client to use the
GSSAPI
mechanism for SASL authentication using theamqp.saslMechanisms
URI option.amqp://myhost:5672?amqp.saslMechanisms=GSSAPI failover:(amqp://myhost:5672?amqp.saslMechanisms=GSSAPI)
Set the
java.security.auth.login.config
system property to the path of a JAAS login configuration file containing appropriate configuration for a KerberosLoginModule
.-Djava.security.auth.login.config=<login-config-file>
The login configuration file might look like the following example:
amqp-jms-client { com.sun.security.auth.module.Krb5LoginModule required useTicketCache=true; };
The precise configuration used will depend on how you wish the credentials to be established for the connection, and the particular LoginModule
in use. For details of the Oracle Krb5LoginModule
, see the Oracle Krb5LoginModule
class reference. For details of the IBM Java 8 Krb5LoginModule
, see the IBM Krb5LoginModule
class reference.
It is possible to configure a LoginModule
to establish the credentials to use for the Kerberos process, such as specifying a principal and whether to use an existing ticket cache or keytab. If, however, the LoginModule
configuration does not provide the means to establish all necessary credentials, it may then request and be passed the username and password values from the client Connection
object if they were either supplied when creating the Connection
using the ConnectionFactory
or previously configured via its URI options.
Note that Kerberos is supported only for authentication purposes. Use SSL/TLS connections for encryption.
The following connection URI options can be used to influence the Kerberos authentication process.
- sasl.options.configScope
-
The name of the login configuration entry used to authenticate. The default is
amqp-jms-client
. - sasl.options.protocol
-
The protocol value used during the GSSAPI SASL process. The default is
amqp
. - sasl.options.serverName
-
The
serverName
value used during the GSSAPI SASL process. The default is the server hostname from the connection URI.
Similar to the amqp.
and transport.
options detailed previously, these options must be specified on a per-host basis or as all-host nested options in a failover URI.
Chapter 8. Message delivery
8.1. Handling unacknowledged deliveries
Messaging systems use message acknowledgment to track if the goal of sending a message is truly accomplished.
When a message is sent, there is a period of time after the message is sent and before it is acknowledged (the message is "in flight"). If the network connection is lost during that time, the status of the message delivery is unknown, and the delivery might require special handling in application code to ensure its completion.
The sections below describe the conditions for message delivery when connections fail.
Non-transacted producer with an unacknowledged delivery
If a message is in flight, it is sent again after reconnect, provided a send timeout is not set and has not elapsed.
No user action is required.
Transacted producer with an uncommitted transaction
If a message is in flight, it is sent again after reconnect. If the send is the first in a new transaction, then sending continues as normal after reconnect. If there are previous sends in the transaction, then the transaction is considered failed, and any subsequent commit operation throws a TransactionRolledBackException
.
To ensure delivery, the user must resend any messages belonging to a failed transaction.
Transacted producer with a pending commit
If a commit is in flight, then the transaction is considered failed, and any subsequent commit operation throws a TransactionRolledBackException
.
To ensure delivery, the user must resend any messages belonging to a failed transaction.
Non-transacted consumer with an unacknowledged delivery
If a message is received but not yet acknowledged, then acknowledging the message produces no error but results in no action by the client.
Because the received message is not acknowledged, the producer might resend it. To avoid duplicates, the user must filter out duplicate messages by message ID.
Transacted consumer with an uncommitted transaction
If an active transaction is not yet committed, it is considered failed, and any pending acknowledgments are dropped. Any subsequent commit operation throws a TransactionRolledBackException
.
The producer might resend the messages belonging to the transaction. To avoid duplicates, the user must filter out duplicate messages by message ID.
Transacted consumer with a pending commit
If a commit is in flight, then the transaction is considered failed. Any subsequent commit operation throws a TransactionRolledBackException
.
The producer might resend the messages belonging to the transaction. To avoid duplicates, the user must filter out duplicate messages by message ID.
8.2. Extended session acknowledgment modes
The client supports two additional session acknowledgement modes beyond those defined in the JMS specification.
Individual acknowledge
In this mode, messages must be acknowledged individually by the application using the Message.acknowledge()
method used when the session is in CLIENT_ACKNOWLEDGE
mode. Unlike with CLIENT_ACKNOWLEDGE
mode, only the target message is acknowledged. All other delivered messages remain unacknowledged. The integer value used to activate this mode is 101.
connection.createSession(false, 101);
No acknowledge
In this mode, messages are accepted at the server before being dispatched to the client, and no acknowledgment is performed by the client. The client supports two integer values to activate this mode, 100 and 257.
connection.createSession(false, 100);
Chapter 9. Logging
9.1. Configuring logging
The client uses the SLF4J API, enabling users to select a particular logging implementation based on their needs. For example, users can provide the slf4j-log4j binding to select the Log4J implementation. More details on SLF4J are available from its website.
The client uses Logger
names residing within the org.apache.qpid.jms
hierarchy, which you can use to configure a logging implementation based on your needs.
9.2. Enabling protocol logging
When debugging, it is sometimes useful to enable additional protocol trace logging from the Qpid Proton AMQP 1.0 library. There are two ways to achieve this.
-
Set the environment variable (not the Java system property)
PN_TRACE_FRM
to1
. When the variable is set to1
, Proton emits frame logging to the console. -
Add the option
amqp.traceFrames=true
to your connection URI and configure theorg.apache.qpid.jms.provider.amqp.FRAMES
logger to log levelTRACE
. This adds a protocol tracer to Proton and includes the output in your logs.
You can also configure the client to emit low-level tracing of input and output bytes. To enable this, add the option transport.traceBytes=true
to your connection URI and configure the org.apache.qpid.jms.transports.netty.NettyTcpTransport
logger to log level DEBUG
.
Chapter 10. Distributed tracing
The client offers distributed tracing based on the Jaeger implementation of the OpenTracing standard.
10.1. Enabling distributed tracing
Use the following steps to enable tracing in your application:
Procedure
Add the Jaeger client dependency to your POM file.
<dependency> <groupId>io.jaegertracing</groupId> <artifactId>jaeger-client</artifactId> <version>${jaeger-version}</version> </dependency>
${jaeger-version}
must be 1.0.0 or later.Add the
jms.tracing
option to your connection URI. Set the value toopentracing
.Example: A connection URI with tracing enabled
amqps://example.net?jms.tracing=opentracing
Register the global tracer.
Example: Global tracer registration
import io.jaegertracing.Configuration; import io.opentracing.Tracer; import io.opentracing.util.GlobalTracer; public class Example { public static void main(String[] args) { Tracer tracer = Configuration.fromEnv("<service-name>").getTracer(); GlobalTracer.registerIfAbsent(tracer); // ... } }
Configure your environment for tracing.
Example: Tracing configuration
$ export JAEGER_SAMPLER_TYPE=const $ export JAEGER_SAMPLER_PARAM=1 $ java -jar example.jar net.example.Example
The configuration shown here is for demonstration purposes. For more information about Jaeger configuration, see Configuration via Environment and Jaeger Sampling.
To view the traces your application captures, use the Jaeger Getting Started to run the Jaeger infrastructure and console.
Chapter 11. Interoperability
This chapter discusses how to use AMQ JMS in combination with other AMQ components. For an overview of the compatibility of AMQ components, see the product introduction.
11.1. Interoperating with other AMQP clients
AMQP messages are composed using the AMQP type system. Having this common format is one of the reasons AMQP clients in different languages are able to interoperate with each other. This section serves to document behaviour around the AMQP payloads sent and received by the client in relation to the various JMS Message types used, to aid in using the client along with other AMQP clients.
11.1.1. Sending messages
This section serves to document the different payloads sent by the client when using the various JMS Message types, so as to aid in using other clients to receive them.
11.1.1.1. Message type
JMS message type | Description of transmitted AMQP message |
---|---|
A TextMessage will be sent using an amqp-value body section containing a utf8 encoded string of the body text, or null if no body text is set. The message annotation with symbol key of “x-opt-jms-msg-type” will be set to a byte value of 5. | |
A BytesMessage will be sent using a data body section containing the raw bytes from the BytesMessage body, with the properties section content-type field set to the symbol value “application/octet-stream”. The message annotation with symbol key of “x-opt-jms-msg-type” will be set to a byte value of 3. | |
A MapMessage body will be sent using an amqp-value body section containing a single map value. Any byte[] values in the MapMessage body will be encoded as binary entries in the map. The message annotation with symbol key of “x-opt-jms-msg-type” will be set to a byte value of 2. | |
A StreamMessage will be sent using an amqp-sequence body section containing the entries in the StreamMessage body. Any byte[] entries in the StreamMessage body will be encoded as binary entries in the sequence. The message annotation with symbol key of “x-opt-jms-msg-type” will be set to a byte value of 4. | |
An ObjectMessage will be sent using an data body section, containing the bytes from serializing the ObjectMessage body using an ObjectOutputStream, with the properties section content-type field set to the symbol value “application/x-java-serialized-object”. The message annotation with symbol key of “x-opt-jms-msg-type” will be set to a byte value of 1. | |
A plain JMS Message has no body, and will be sent as an amqp-value body section containing a null. The message annotation with symbol key of “x-opt-jms-msg-type” will be set to a byte value of 0. |
11.1.1.2. Message properties
JMS messages support setting application properties of various Java types. This section serves to show the mapping of these property types to AMQP typed values in the application-properties section of the sent message. Both JMS and AMQP use string keys for property names.
JMS property type | AMQP application property type |
---|---|
boolean | |
byte | |
short | |
int | |
long | |
float | |
double | |
String |
11.1.2. Receiving messages
This section serves to document the different payloads received by the client will be mapped to the various JMS Message types, so as to aid in using other clients to send messages for receipt by the JMS client.
11.1.2.1. Message type
If the the “x-opt-jms-msg-type” message-annotation is present on the received AMQP message, its value is used to determine the JMS message type used to represent it, according to the mapping detailed in the following table. This reflects the reverse process of the mappings discussed for messages sent by the JMS client.
AMQP “x-opt-jms-msg-type” message-annotation value (type) | JMS message type |
---|---|
0 (byte) | |
1 (byte) | |
2 (byte) | |
3 (byte) | |
4 (byte) | |
5 (byte) |
If the “x-opt-jms-msg-type” message-annotation is not present, the table below details how the message will be mapped to a JMS Message type. Note that the StreamMessage and MapMessage types are only assigned to annotated messages.
Description of Received AMQP Message without “x-opt-jms-msg-type” annotation | JMS Message Type |
---|---|
| |
| |
|
11.1.2.2. Message properties
This section serves to show the mapping of values in the application-properties section of the received AMQP message to Java types used in the JMS Message.
AMQP application property Type | JMS property type |
---|---|
boolean | |
byte | |
short | |
int | |
long | |
float | |
double | |
String | |
String |
11.2. Connecting to AMQ Broker
AMQ Broker is designed to interoperate with AMQP 1.0 clients. Check the following to ensure the broker is configured for AMQP messaging:
- Port 5672 in the network firewall is open.
- The AMQ Broker AMQP acceptor is enabled. See Default acceptor settings.
- The necessary addresses are configured on the broker. See Addresses, Queues, and Topics.
- The broker is configured to permit access from your client, and the client is configured to send the required credentials. See Broker Security.
11.3. Connecting to AMQ Interconnect
AMQ Interconnect works with any AMQP 1.0 client. Check the following to ensure the components are configured correctly:
- Port 5672 in the network firewall is open.
- The router is configured to permit access from your client, and the client is configured to send the required credentials. See Securing network connections.
Appendix A. Using your subscription
AMQ is provided through a software subscription. To manage your subscriptions, access your account at the Red Hat Customer Portal.
A.1. Accessing your account
Procedure
- Go to access.redhat.com.
- If you do not already have an account, create one.
- Log in to your account.
A.2. Activating a subscription
Procedure
- Go to access.redhat.com.
- Navigate to My Subscriptions.
- Navigate to Activate a subscription and enter your 16-digit activation number.
A.3. Downloading release files
To access .zip, .tar.gz, and other release files, use the customer portal to find the relevant files for download. If you are using RPM packages or the Red Hat Maven repository, this step is not required.
Procedure
- Open a browser and log in to the Red Hat Customer Portal Product Downloads page at access.redhat.com/downloads.
- Locate the Red Hat AMQ entries in the INTEGRATION AND AUTOMATION category.
- Select the desired AMQ product. The Software Downloads page opens.
- Click the Download link for your component.
A.4. Registering your system for packages
To install RPM packages for this product on Red Hat Enterprise Linux, your system must be registered. If you are using downloaded release files, this step is not required.
Procedure
- Go to access.redhat.com.
- Navigate to Registration Assistant.
- Select your OS version and continue to the next page.
- Use the listed command in your system terminal to complete the registration.
For more information about registering your system, see one of the following resources:
Appendix B. Using Red Hat Maven repositories
This section describes how to use Red Hat-provided Maven repositories in your software.
B.1. Using the online repository
Red Hat maintains a central Maven repository for use with your Maven-based projects. For more information, see the repository welcome page.
There are two ways to configure Maven to use the Red Hat repository:
Adding the repository to your Maven settings
This method of configuration applies to all Maven projects owned by your user, as long as your POM file does not override the repository configuration and the included profile is enabled.
Procedure
Locate the Maven
settings.xml
file. It is usually inside the.m2
directory in the user home directory. If the file does not exist, use a text editor to create it.On Linux or UNIX:
/home/<username>/.m2/settings.xml
On Windows:
C:\Users\<username>\.m2\settings.xml
Add a new profile containing the Red Hat repository to the
profiles
element of thesettings.xml
file, as in the following example:Example: A Maven
settings.xml
file containing the Red Hat repository<settings> <profiles> <profile> <id>red-hat</id> <repositories> <repository> <id>red-hat-ga</id> <url>https://maven.repository.redhat.com/ga</url> </repository> </repositories> <pluginRepositories> <pluginRepository> <id>red-hat-ga</id> <url>https://maven.repository.redhat.com/ga</url> <releases> <enabled>true</enabled> </releases> <snapshots> <enabled>false</enabled> </snapshots> </pluginRepository> </pluginRepositories> </profile> </profiles> <activeProfiles> <activeProfile>red-hat</activeProfile> </activeProfiles> </settings>
For more information about Maven configuration, see the Maven settings reference.
Adding the repository to your POM file
To configure a repository directly in your project, add a new entry to the repositories
element of your POM file, as in the following example:
Example: A Maven pom.xml
file containing the Red Hat repository
<project> <modelVersion>4.0.0</modelVersion> <groupId>com.example</groupId> <artifactId>example-app</artifactId> <version>1.0.0</version> <repositories> <repository> <id>red-hat-ga</id> <url>https://maven.repository.redhat.com/ga</url> </repository> </repositories> </project>
For more information about POM file configuration, see the Maven POM reference.
B.2. Using a local repository
Red Hat provides file-based Maven repositories for some of its components. These are delivered as downloadable archives that you can extract to your local filesystem.
To configure Maven to use a locally extracted repository, apply the following XML in your Maven settings or POM file:
<repository>
<id>red-hat-local</id>
<url>${repository-url}</url>
</repository>
${repository-url}
must be a file URL containing the local filesystem path of the extracted repository.
Operating system | Filesystem path | URL |
---|---|---|
Linux or UNIX |
|
|
Windows |
|
|
Appendix C. Using AMQ Broker with the examples
The AMQ JMS examples require a running message broker with a queue named queue
. Use the procedures below to install and start the broker and define the queue.
C.1. Installing the broker
Follow the instructions in Getting Started with AMQ Broker to install the broker and create a broker instance. Enable anonymous access.
The following procedures refer to the location of the broker instance as <broker-instance-dir>
.
C.2. Starting the broker
Procedure
Use the
artemis run
command to start the broker.$ <broker-instance-dir>/bin/artemis run
Check the console output for any critical errors logged during startup. The broker logs
Server is now live
when it is ready.$ example-broker/bin/artemis run __ __ ____ ____ _ /\ | \/ |/ __ \ | _ \ | | / \ | \ / | | | | | |_) |_ __ ___ | | _____ _ __ / /\ \ | |\/| | | | | | _ <| '__/ _ \| |/ / _ \ '__| / ____ \| | | | |__| | | |_) | | | (_) | < __/ | /_/ \_\_| |_|\___\_\ |____/|_| \___/|_|\_\___|_| Red Hat AMQ <version> 2020-06-03 12:12:11,807 INFO [org.apache.activemq.artemis.integration.bootstrap] AMQ101000: Starting ActiveMQ Artemis Server ... 2020-06-03 12:12:12,336 INFO [org.apache.activemq.artemis.core.server] AMQ221007: Server is now live ...
C.3. Creating a queue
In a new terminal, use the artemis queue
command to create a queue named queue
.
$ <broker-instance-dir>/bin/artemis queue create --name queue --address queue --auto-create-address --anycast
You are prompted to answer a series of yes or no questions. Answer N
for no to all of them.
Once the queue is created, the broker is ready for use with the example programs.
C.4. Stopping the broker
When you are done running the examples, use the artemis stop
command to stop the broker.
$ <broker-instance-dir>/bin/artemis stop
Revised on 2020-10-08 11:24:47 UTC