此内容没有您所选择的语言版本。
Chapter 3. Alternative provisioning network methods
This section contains information about other methods that you can use to configure the provisioning network to accommodate routed spine-leaf with composable networks.
3.1. VLAN Provisioning network
In this example, the director deploys new overcloud nodes through the provisioning network and uses a VLAN tunnel across the L3 topology. For more information, see Figure 3.1, “VLAN provisioning network topology”. If you use a VLAN provisioning network, the director DHCP servers can send DHCPOFFER
broadcasts to any leaf. To establish this tunnel, trunk a VLAN between the Top-of-Rack (ToR) leaf switches. In the following diagram, the StorageLeaf
networks are presented to the Ceph storage and Compute nodes; the NetworkLeaf
represents an example of any network that you want to compose.
Figure 3.1. VLAN provisioning network topology
3.2. VXLAN Provisioning network
In this example, the director deploys new overcloud nodes through the provisioning network and uses a VXLAN tunnel to span across the layer 3 topology. For more information, see Figure 3.2, “VXLAN provisioning network topology”. If you use a VXLAN provisioning network, the director DHCP servers can send DHCPOFFER
broadcasts to any leaf. To establish this tunnel, configure VXLAN endpoints on the Top-of-Rack (ToR) leaf switches.
Figure 3.2. VXLAN provisioning network topology