31.2. Configure Cross-Datacenter Replication

Procedure 31.2. Setting Up Cross-Datacenter Replication

1. Configure the Local Site

   <infinispan>
      <global>      
         <site local="SFO" />
         <transport clusterName="default"> 
            <properties> 
                <property name="configurationFile" value="jgroups-with-relay.xml"/>     
             </properties> 
         </transport>
         <!-- Additional configuration information here -->
      </global>
      <!-- Additional configuration information here -->
      <namedCache name="lonBackup">
         <sites>
            <backupFor remoteSite="LON" 
   		    remoteCache="lon" />
         </sites>
      </namedCache>
   </infinispan>

   Copy to Clipboard Toggle word wrap
   1. Add the site element to the global element to add the local site (in this example, the local site is named LON).
   2. Cross-site replication requires a non-default JGroups configuration. Add the transport element and set up the path to the configuration file as the configurationFile property. In this example, the JGroups configuration file is named jgroups-with-relay.xml.
   3. Configure the cache in site LON to back up to the sites NYC and SFO.
   4. Configure the back up caches:
      1. Configure the cache in site NYC to receive back up data from LON.
      2. Configure the cache in site SFO to receive back up data from LON.

2. Add the Contents of the Configuration File

   As a default, Red Hat JBoss Data Grid includes JGroups configuration files such as default-configs/default-jgroups-tcp.xml and default-configs/default-jgroups-udp.xml in the infinispan-embedded-{VERSION}.jar package.
   Copy the JGroups configuration to a new file (in this example, it is named jgroups-with-relay.xml) and add the provided configuration information to this file. Note that the relay.RELAY2 protocol configuration must be the last protocol in the configuration stack.

   <config> 
       ... 
       <relay.RELAY2 site="LON" 
                 config="relay.xml"
                 relay_multicasts="false" />
   </config>

   Copy to Clipboard Toggle word wrap

3. Configure the relay.xml File

   Set up the relay.RELAY2 configuration in the relay.xml file. This file describes the global cluster configuration.

   <RelayConfiguration> 
       <sites> 
           <site name="LON" 
                 id="0"> 
               <bridges> 
                   <bridge config="jgroups-global.xml" 
                           name="global"/> 
                   </bridges> 
           </site>  
           <site name="NYC" 
                 id="1"> 
               <bridges> 
                   <bridge config="jgroups-global.xml" 
                           name="global"/> 
                   </bridges> 
           </site>  
           <site name="SFO" 
                 id="2"> 
               <bridges> 
                   <bridge config="jgroups-global.xml" 
                           name="global"/> 
               </bridges> 
           </site> 
       </sites> 
   </RelayConfiguration>

   Copy to Clipboard Toggle word wrap

4. Configure the Global Cluster

   The file jgroups-global.xml referenced in relay.xml contains another JGroups configuration which is used for the global cluster: communication between sites.
   The global cluster configuration is usually TCP-based and uses the TCPPING protocol (instead of PING or MPING) to discover members. Copy the contents of default-configs/default-jgroups-tcp.xml into jgroups-global.xml and add the following configuration in order to configure TCPPING:

   <config> 
       <TCP bind_port="7800" ... /> 
       <TCPPING initial_hosts="lon.hostname[7800],nyc.hostname[7800],sfo.hostname[7800]"
                ergonomics="false" /> 
             <!-- Rest of the protocols --> 
   </config>

   Copy to Clipboard Toggle word wrap
   Replace the hostnames (or IP addresses) in TCPPING.initial_hosts with those used for your site masters. The ports (7800 in this example) must match the TCP.bind_port.
   For more information about the TCPPING protocol, see Section 26.2.1.3, “Using the TCPPing Protocol”

Procedure 31.3. Configure Cross-Datacenter Replication Programmatically

1. Identify the Node Location

   Declare the site the node resides in:

   globalConfiguration.site().localSite("LON");

   Copy to Clipboard Toggle word wrap

2. Configure JGroups

   Configure JGroups to use the RELAY protocol:

   globalConfiguration.transport().addProperty("configurationFile", jgroups-with-relay.xml);

   Copy to Clipboard Toggle word wrap

3. Set Up the Remote Site

   Set up JBoss Data Grid caches to replicate to the remote site:

   ConfigurationBuilder lon = new ConfigurationBuilder();
   lon.sites().addBackup()
         .site("NYC")
         .backupFailurePolicy(BackupFailurePolicy.WARN)
         .strategy(BackupConfiguration.BackupStrategy.SYNC)
         .replicationTimeout(12000)
         .sites().addInUseBackupSite("NYC")
       .sites().addBackup()
         .site("SFO")
         .backupFailurePolicy(BackupFailurePolicy.IGNORE)
         .strategy(BackupConfiguration.BackupStrategy.ASYNC)
         .sites().addInUseBackupSite("SFO")

   Copy to Clipboard Toggle word wrap

4. Optional: Configure the Backup Caches

   JBoss Data Grid implicitly replicates data to a cache with same name as the remote site. If a backup cache on the remote site has a different name, users must specify a backupFor cache to ensure data is replicated to the correct cache.

   Note

   This step is optional and only required if the remote site's caches are named differently from the original caches.
   1. Configure the cache in site NYC to receive backup data from LON:

      ConfigurationBuilder NYCbackupOfLon = new ConfigurationBuilder();
      NYCbackupOfLon.sites().backupFor().remoteCache("lon").remoteSite("LON");

      Copy to Clipboard Toggle word wrap
   2. Configure the cache in site SFO to receive backup data from LON:

      ConfigurationBuilder SFObackupOfLon = new ConfigurationBuilder();
      SFObackupOfLon.sites().backupFor().remoteCache("lon").remoteSite("LON");

      Copy to Clipboard Toggle word wrap

5. Add the Contents of the Configuration File

   As a default, Red Hat JBoss Data Grid includes JGroups configuration files such as default-configs/default-jgroups-tcp.xml and default-configs/default-jgroups-udp.xml in the infinispan-embedded-{VERSION}.jar package.
   Copy the JGroups configuration to a new file (in this example, it is named jgroups-with-relay.xml) and add the provided configuration information to this file. Note that the relay.RELAY2 protocol configuration must be the last protocol in the configuration stack.

   <config> 
       <!-- Additional configuration information here --> 
       <relay.RELAY2 site="LON" 
                 config="relay.xml"
                 relay_multicasts="false" /> 
   </config>

   Copy to Clipboard Toggle word wrap

6. Configure the relay.xml File

   Set up the relay.RELAY2 configuration in the relay.xml file. This file describes the global cluster configuration.

   <RelayConfiguration> 
       <sites> 
           <site name="LON" 
                 id="0"> 
               <bridges> 
                   <bridge config="jgroups-global.xml" 
                           name="global"/> 
                   </bridges> 
           </site>  
           <site name="NYC" 
                 id="1"> 
               <bridges> 
                   <bridge config="jgroups-global.xml" 
                           name="global"/> 
                   </bridges> 
           </site>  
           <site name="SFO" 
                 id="2"> 
               <bridges> 
                   <bridge config="jgroups-global.xml" 
                           name="global"/> 
               </bridges> 
           </site> 
       </sites> 
   </RelayConfiguration>

   Copy to Clipboard Toggle word wrap

7. Configure the Global Cluster

   The file jgroups-global.xml referenced in relay.xml contains another JGroups configuration which is used for the global cluster: communication between sites.
   The global cluster configuration is usually TCP-based and uses the TCPPING protocol (instead of PING or MPING) to discover members. Copy the contents of default-configs/default-jgroups-tcp.xml into jgroups-global.xml and add the following configuration in order to configure TCPPING:

   <config> 
       <TCP bind_port="7800" <!-- Additional configuration information here --> /> 
       <TCPPING initial_hosts="lon.hostname[7800],nyc.hostname[7800],sfo.hostname[7800]"
                ergonomics="false" /> 
             <!-- Rest of the protocols --> 
   </config>

   Copy to Clipboard Toggle word wrap
   Replace the hostnames (or IP addresses) in TCPPING.initial_hosts with those used for your site masters. The ports (7800 in this example) must match the TCP.bind_port.
   For more information about the TCPPING protocol, see Section 26.2.1.3, “Using the TCPPing Protocol”