Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

Chapter 8. Hardware feature requirements by class


The hardware class requirements are categorized in Compute, Management, Network, and Storage.

8.1. Compute

The hardware features that are included in Compute are:

Expand
Table 8.1. System Processors
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

System Processors, System-on-Chip (SoC), System-in-Package (SiP)

System Processor (Maximum quantity of Cores)

CORE, CPUSCALING [a], FV_CORE, FV_MEMORY, PROFILER

Maximum number of logical cores [b] and feature set from available CPUs [c]

Install, Boot

System Virtualization

INFO and CORE and MEMORY on the guest

INFO and CORE and MEMORY on the guest

A fully virtualized guest environment

 
[a] The cpuscaling test is required for cloud instance types where the operating system can control processor C-states or P-states.
[b] The Core clock speed, FSB speed, cache size, cache depth and manufacturing size are not considered for feature set review.
[c] The minimum installed memory is required to match the System Memory testing requirement.
Expand
Table 8.2. System Memory
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

System Memory

Maximum supported System memory

Memory

Lower of 1GB Per Logical CPU, system limit, or OS limit[a]

Install, Boot

NVDIMM

Maximum supported NVDIMM memory

Memory

Install, Boot, Kdump

NVDIMM block-mode

NVDIMM block-mode

NVDIMM

 
[a] Additional testing may be required where the maximum capacity is greater than the currently listed OS Certified storage or system memory maximums
Expand
Table 8.3. System Elements
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, Kdump

Mainboard, Chassis, I/O Chassis, Docking Stations, Port Expanders

Applicable class for the integrated and optional hardware.

Applicable class tests for the integrated and optional hardware. hardware.

Applicable test for each function as required by the device class(es)

Install, Boot

Multi-Function/Multi-Port Adapters

Applicable class for each function/port

Applicable class testing for each function/port[a][b]

Applicable test for each function as required by the device class(es)

Install, Boot

[a] Unusable ports need to be tested
[b] To create multiple ports on a removable card, identical chips are replicated. Leverage may enclose multi-port.

8.2. Management

The hardware features that are included in Management are:

Expand
Table 8.4. Console
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

Display Adapters, and Virtual Consoles

Graphic Console

Video[a]

The lower of VRAM/VBIOS limits, panel capabilities, or 1024x768 at 24 or 32 BPP

Install[b], Boot

[a] 3D/GPGU support is not currently tested
[b] Native resolutions not required during install
Expand
Table 8.5. Power Control
Hardware ClassCatalog FeaturesRequired TestsRequired Hardware

Power Management, Battery

Suspend to Disk, Suspend to Memory, Battery Monitoring

Battery, Lid and Suspend

Required for all models capable of running from battery power.

8.3. Network

The hardware features that are included in Network are:

Expand
Table 8.6. Ethernet
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

Ethernet

1 Gigabit Ethernet, 2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, 20 Gigabit Ethernet, 25 Gigabit Ethernet, 40 Gigabit Ethernet, 50 Gigabit Ethernet,100 Gigabit Ethernet

1GigEthernet, 2.5GigEthernet, 5GigEthernet, 10GigEthernet, 20GigEthernet, 25GigEthernet, 40GigEthernet, 50GigEthernet, 100GigEthernet

Each interface at maximum connection speed.[a]

Install, Boot, kdump

[a] Devices that support network partitioning are required to demonstrate both the complete bandwidth and a single partition in one or more test runs.
Expand
Table 8.7. Fibre Channel
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

Fibre Channel

16 Gigabit Fibre Channel, 32 Gigabit Fibre Channel, 64 Gigabit Fibre Channel, 128 Gigabit Fibre Channel

Network or Storage[a]

Each interface at maximum connection speed

Install, Boot, kdump

[a] Nominal connection speed is considered a feature. Remote attached storage devices may require additional testing.
Expand
Table 8.8. iSCSI
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

iSCSI Adapters

iSCSI

Network and Storage[a]

Each interface at maximum connection speed

Install, Boot, kdump

[a] Nominal connection speed is considered a feature. Remote attached storage devices may require additional testing.
Expand
Table 8.9. Infiniband
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

Infiniband[a]

QDR Infiniband, FDR Infiniband, EDR Infiniband

Infiniband_QDR, Infiniband_FDR, or Infiniband_ED

Each interface at maximum connection speed.[b][c]

Install, Boot, kdump

[a] multiple hosts to be connected into a single adapter by separating the PCIe interface into multiple and independent interfaces.
[b] Implements a connection in hardware for efficient data delivery with minimal latency.
[c] Devices that support network partitioning are required to demonstrate both the complete bandwidth and a single partition in one or more test runs.
Expand
Table 8.10. iWarp
Hardware ClassCatalog FeaturesRequired TestsRequired Hardware

iWarp

10 Gigabit iWarp, 20 Gigabit iWarp, 25 Gigabit iWarp, 40 Gigabit iWarp, 50 Gigabit iWarp, 100 Gigabit iWarp

10GigiWarp, 20GigiWarp, 25GigiWarp, 40GigiWarp, 50GigiWarp, or 100GigiWarp

Each interface with the corresponding test for the maximum claimed connection speed.footnote:[a]

[a] Devices that support network partitioning are required to demonstrate both the complete bandwidth and a single partition in one or more test runs.
Expand
Table 8.11. Omnipath
Hardware ClassCatalog FeaturesRequired TestsRequired Hardware

OmniPath

OmniPath

OmniPath

Each interface with the corresponding test for the maximum claimed connection speed.

Expand
Table 8.12. RDMA over Converged Ethernet (RoCE)
Hardware ClassCatalog FeaturesRequired TestsRequired Hardware

RoCE

10 Gigabit RoCE, 20 Gigabit RoCE, 25 Gigabit RoCE, 40 Gigabit RoCE, 50 Gigabit RoCE, 100 Gigabit RoCE

10GigRoCE, 20GigRoCE, 25GigRoCE, 40GigRoCE, 50GigRoCE, or 100GigRoCE

Each interface with the corresponding test for the maximum claimed connection speed.[a]

[a] Devices that support network partitioning are required to demonstrate both the complete bandwidth and a single partition in one or more test runs.

8.4. Storage

The hardware features that are included in Storage are:

Expand
Table 8.13. HBA, HDD, and SDD
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

M.2 NVMe, M.2 SATA, PCIe NVMe, SATA HDD, SATA SSD, SAS[a], SAS SSD, U.2 NVMe, U.2 SATA

M.2 NVMe, M.2 SATA, NVMe, SATA, SATA SSD, SAS, SAS SSD, U.2 NVMe, U.2 SATA

M2_NVMe, M2_SATA, NVMe, SATA, SATA_SSD, SAS, SAS SSD, U2_NVMe (PCI Express), U2_SATA

Any capacity[b] drive[c] attached to the controller or the maximum storage capacity of local attach arrays if greater than OS limit

Install, Boot, kdump

RAID Controllers

Storage

Storage

Each OS code path (e.g. where multiple drivers are used) for each interface. Maximum storage capacity of arrays if greater than OS limit.

Install, Boot, kdump

[a] SAS Controllers require testing with SAS drives.
[b] Drive capacity is not tracked in the context of a system.
[c] SSD features require SSD drives to be tested.
Expand
Table 8.14. Tape
Hardware ClassCatalog FeaturesRequired TestsRequired Hardware

Tape Drives and Changers[a]

Tape drive, Tape changer

TAPE

Each drive

[a] Changers require manual testing with test description and results report
Expand
Table 8.15. Memory Cards or Readers
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

eMMC, PCIE SD Card Reader, SD Card, USB Flash Key, USB SD Card Reader[a]

eMMC, PCIE SD Card Reader, SD Card, USB Flash Key, USB SD Card Reader

Storage

The maximum storage capacity and format feature set

Install,Boot

[a] Including variants for each (eg. mini, micro, etc.).
Note

Multi-Readers follow the Multi-Port Adapter criteria.

Expand
Table 8.16. Optical
Hardware ClassCatalog FeaturesRequired TestsRequired HardwareInstall, Boot, kdump

CD-ROM drive, DVD drive, or Blu-ray

BD-RE, BD-R, Blu-ray, DVD-RW, DVD-R, DVD, CD-RW, CD-R, CD

CDROM drive, DVD drive, or BLURAY

The highest media type in order of BD-RW (highest), BD-R, DVD-RW[a], DVD-R, CD-RW, CD-R, BD, DVD, CD (lowest) on each storage controller, based on the collective media support of all drives[b] available on that storage controller

Install, Boot

[a] "+" and "-" are considered equal for feature review.
[b] The hardware partner is required to support all drives that are part of the model regardless of the specific drive or number of drives used during testing. Equivalent production cycle drive changes are required to be tested internally by the hardware partner. The production cycle drive change test results are not required to be submitted to Red Hat
Nach oben
Red Hat logoGithubredditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können. Entdecken Sie unsere neuesten Updates.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

Theme

© 2025 Red Hat