Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.
3.2. Ignoring Local Disks when Generating Multipath Devices
Some machines have local SCSI cards for their internal disks. DM Multipath is not recommended for these devices. If you set the
find_multipaths configuration parameter to yes, you should not have to blacklist these devices. For information on the find_multipaths configuration parameter, see Section 4.3, “Configuration File Defaults”.
If you do not set the
find_multipaths configuration parameter to yes, can use the following procedure to modify the multipath configuration file to ignore the local disks when configuring multipath.
- Determine which disks are the internal disks and mark them as the ones to blacklist.In this example,
/dev/sdais the internal disk. Note that as originally configured in the default multipath configuration file, executing themultipath -v2command shows the local disk,/dev/sda, in the multipath map.This examples specifies the-doption of themultipathcommand to indicate that this is a dry run that will not create the multipath devices. For further information on themultipathcommand output, see Section 5.7, “Multipath Command Output”.#
multipath -v2 -d: SIBM-ESXSST336732LC____F3ET0EP0Q000072428BX1 undef WINSYS,SF2372 size=33 GB features="0" hwhandler="0" wp=undef `-+- policy='round-robin 0' prio=1 status=undef |- 0:0:0:0 sda 8:0 [--------- : 3600a0b80001327d80000006d43621677 undef WINSYS,SF2372 size=12G features='0' hwhandler='0' wp=undef `-+- policy='round-robin 0' prio=1 status=undef |- 2:0:0:0 sdb 8:16 undef ready running `- 3:0:0:0 sdf 8:80 undef ready running : 3600a0b80001327510000009a436215ec undef WINSYS,SF2372 size=12G features='0' hwhandler='0' wp=undef `-+- policy='round-robin 0' prio=1 status=undef |- 2:0:0:1 sdc 8:32 undef ready running `- 3:0:0:1 sdg 8:96 undef ready running : 3600a0b80001327d800000070436216b3 undef WINSYS,SF2372 size=12G features='0' hwhandler='0' wp=undef `-+- policy='round-robin 0' prio=1 status=undef |- 2:0:0:2 sdd 8:48 undef ready running `- 3:0:0:2 sdg 8:112 undef ready running : 3600a0b80001327510000009b4362163e undef WINSYS,SF2372 size=12G features='0' hwhandler='0' wp=undef `-+- policy='round-robin 0' prio=1 status=undef |- 2:0:0:3 sdd 8:64 undef ready running `- 3:0:0:3 sdg 8:128 undef ready running - In order to prevent the device mapper from mapping
/dev/sdain its multipath maps, edit the blacklist section of the/etc/multipath.conffile to include this device. Although you could blacklist thesdadevice using adevnodetype, that would not be a safe procedure since/dev/sdais not guaranteed to be the same on reboot. To blacklist individual devices, you can blacklist using the WWID of that device.Note that in the output to themultipath -v2command, the WWID of the/dev/sdadevice is SIBM-ESXSST336732LC____F3ET0EP0Q000072428BX1. To blacklist this device, include the following in the/etc/multipath.conffile.blacklist { wwid SIBM-ESXSST336732LC____F3ET0EP0Q000072428BX1 } - After you have updated the
/etc/multipath.conffile, you must manually tell themultipathddaemon to reload the file. The following command reloads the updated/etc/multipath.conffile.#
systemctl reload multipathd.service
