SupportKonsoleEntwicklerDemo startenKontakt

Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

Chapter 7. Patching Red Hat Fuse application

Using the new patch-maven-plugin mechanism you can apply a patch to your Red Hat Fuse application. This mechanism allows you to change the individual versions provided by different Red Hat Fuse BOMS, for example, fuse-springboot-bom and fuse-karaf-bom.

7.1. About patch-maven-plugin

The patch-maven-plugin performs following operations:

  • Retrieve the patch metadata related to current Red Hat Fuse BOMs.
  • Apply the version changes to <dependencyManagement> imported from the BOMs.

After the patch-maven-plugin fetches the metadata, it iterates through all managed and direct dependencies of the project where the plugin was declared and replaces the dependency versions (if they match) using CVE/patch metadata. After versions are replaced, Maven build continues and progresses through standard Maven project stages.

7.2. Applying patch to Red Hat Fuse applications

The purpose of patch-maven-plugin is to update the versions of the dependencies listed in the Red Hat Fuse BOM to the versions specified in the patch metadata of the patch that you wish to apply to your applications.

Procedure

Following procedure explains how to apply the patch to your application.

  1. Add patch-maven-plugin to your project’s pom.xml file. The version of the patch-maven-plugin must be the same as the version of the Fuse BOM. 

    <build>
    <plugins>
        <plugin>
            <groupId>org.jboss.redhat-fuse</groupId>
            <artifactId>patch-maven-plugin</artifactId>
            <version>${version.org.jboss-redhat-fuse}</version>
            <extensions>true</extensions>
        </plugin>
    </plugins>
</build>

  2. When you run any one of the mvn clean deploy or mvn validate or mvn dependency:tree commands, the plugin searches through the project modules to check whether one of Red Hat Fuse BOMs is used. Only two are considered as the supported BOMs:

    • org.jboss.redhat-fuse:fuse-karaf-bom: for Fuse Karaf BOM
    • org.jboss.redhat-fuse:fuse-springboot-bom: for Fuse Spring Boot BOM

  3. If none of the above BOMs are found, the plugin will display following messages: 

    $ mvn clean install
[INFO] Scanning for projects...
[INFO]

========== Red Hat Fuse Maven patching ==========

[INFO] [PATCH] No project in the reactor uses Fuse Karaf or Fuse Spring Boot BOM. Skipping patch processing.
[INFO] [PATCH] Done in 3ms

  4. If both Fuse BOMs are found, the patch-maven-plugin stops with the following warning: 

    $ mvn clean install
[INFO] Scanning for projects...
[INFO]

========== Red Hat Fuse Maven patching ==========

[WARNING] [PATCH] Reactor uses both Fuse Karaf and Fuse Spring Boot BOMs. Please use only one. Skipping patch processing.
[INFO] [PATCH] Done in 3ms

  5. The patch-maven-plugin attempts to fetch one of the following Maven metadata values.

    • For the projects with Fuse Karaf BOM, the org.jboss.redhat-fuse/fuse-karaf-patch-metadata/maven-metadata.xml is resolved. This is the metadata for the artifact with the org.jboss.redhat-fuse:fuse-karaf-patch-metadata:RELEASE coordinates.

    • For the projects with Fuse Spring Boot BOM project, the org.jboss.redhat-fuse/fuse-springboot-patch-metadata/maven-metadata.xml is resolved. This is the metadata for the artifact with the org.jboss.redhat-fuse:fuse-springboot-patch-metadata:RELEASE coordinates.

      Example metadata generated by Maven

      <?xml version="1.0" encoding="UTF-8"?>
<metadata>
  <groupId>org.jboss.redhat-fuse</groupId>
  <artifactId>fuse-springboot-patch-metadata</artifactId>
  <versioning>
    <release>7.8.1.fuse-sb2-781025</release>
    <versions>
      <version>7.8.0.fuse-sb2-780025</version>
      <version>7.7.0.fuse-sb2-770010</version>
      <version>7.7.0.fuse-770010</version>
      <version>7.8.1.fuse-sb2-781025</version>
    </versions>
    <lastUpdated>20201023131724</lastUpdated>
  </versioning>
</metadata>

  6. The patch-maven-plugin parses the metadata to select the version which is applicable to the current project. This is possible only for the Maven projects using Fuse BOM with version 7.8.xxx. Only the metadata that matches the version range 7.8, 7.9 or later is applicable and only the latest version of the metadata is fetched.

  7. The patch-maven-plugin collects a list of remote Maven repositories to be used when downloading the patch metadata identified by groupId, artifactId and version found in previous steps. These Maven repositories are the ones that are listed in the project’s <repositories> elements in the active profiles and also the repositories from settings.xml file. 

    $ mvn clean install
[INFO] Scanning for projects...
[INFO]

========== Red Hat Fuse Maven patching ==========

[INFO] [PATCH] Reading patch metadata and artifacts from 2 project repositories
[INFO] [PATCH]  - local-nexus: http://everfree.forest:8081/repository/maven-releases/
[INFO] [PATCH]  - central: https://repo.maven.apache.org/maven2
Downloading from local-nexus: http://everfree.forest:8081/repository/maven-releases/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/maven-metadata.xml
...

  8. Optionally, if you wish to use a offline repository, you can use -Dpatch option to specify a ZIP file which is produced by fuse-karaf/fuse-karaf-patch-repository or fuse-springboot/fuse-springboot-patch-repository modules of jboss-fuse/redhat-fuse project. These ZIP files have the same internal structure as the Maven repository structure. For example, 

    $ mvn clean install -Dpatch=../../../test/resources/patch-3.zip
[INFO] Scanning for projects...
[INFO]

========== Red Hat Fuse Maven patching ==========

[INFO] [PATCH] Reading metadata and artifacts from /data/sources/github.com/jboss-fuse/redhat-fuse/fuse-tools/patch-maven-plugin/src/test/resources/patch-3.zip
Downloading from fuse-patch: zip:file:/tmp/patch-3.zip-1742974214598205745/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/maven-metadata.xml
Downloaded from fuse-patch: zip:file:/tmp/patch-3.zip-1742974214598205745/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/maven-metadata.xml (406 B at 16 kB/s)
Downloading from fuse-patch: zip:file:/tmp/patch-3.zip-1742974214598205745/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/7.8.0.fuse-sb2-781023/fuse-springboot-patch-metadata-7.8.0.fuse-sb2-781023.xml
Downloaded from fuse-patch: zip:file:/tmp/patch-3.zip-1742974214598205745/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/7.8.0.fuse-sb2-781023/fuse-springboot-patch-metadata-7.8.0.fuse-sb2-781023.xml (926 B at 309 kB/s)
[INFO] [PATCH] Resolved patch descriptor: /home/user/.m2/repository/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/7.8.0.fuse-sb2-781023/fuse-springboot-patch-metadata-7.8.0.fuse-sb2-781023.xml
...

  9. Whether the metadata comes from remote repository, local repository or ZIP file, it is analyzed by the patch-maven-plugin. The fetched metadata contains list of CVEs and for each CVE we have a list of affected Maven artifacts (specified by glob patterns and version ranges) together with a version that contains a fix for a given CVE. For example, 

    <?xml version="1.0" encoding="UTF-8" ?>

<metadata xmlns="urn:redhat:fuse:patch-metadata:1">
    <product-bom groupId="org.jboss.redhat-fuse" artifactId="fuse-springboot-bom" versions="[7.8,7.9)" />
    <cves>
        <cve id="CVE-2020-xyz" description="Jetty can be configured to listen on port 8080"
                cve-link="https://nvd.nist.gov/vuln/detail/CVE-2020-xyz"
                bz-link="https://bugzilla.redhat.com/show_bug.cgi?id=42">
            <affects groupId="org.eclipse.jetty" artifactId="jetty-*" versions="[9.4,9.4.32)" fix="9.4.32.v20200930" />
            <affects groupId="org.eclipse.jetty.http2" artifactId="http2-*" versions="[9.4,9.4.32)" fix="9.4.32.v20200930" />
        </cve>
    </cves>
    <fixes />
</metadata>

  10. Finally a list of fixes specified in patch metadata is consulted when iterating over all managed dependencies in current project. These dependencies (and managed dependencies) that match are changed to fixed versions. For example: 

    $ mvn clean install -U
[INFO] Scanning for projects...
[INFO

========== Red Hat Fuse Maven patching ==========

[INFO] [PATCH] Reading patch metadata and artifacts from 2 project repositories
[INFO] [PATCH]  - local-nexus: http://everfree.forest:8081/repository/maven-releases/
[INFO] [PATCH]  - central: https://repo.maven.apache.org/maven2
Downloading from local-nexus: http://everfree.forest:8081/repository/maven-releases/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/maven-metadata.xml
Downloading from central: https://repo.maven.apache.org/maven2/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/maven-metadata.xml
Downloaded from local-nexus: http://everfree.forest:8081/repository/maven-releases/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/maven-metadata.xml (363 B at 4.3 kB/s)
[INFO] [PATCH] Resolved patch descriptor: /home/user/.m2/repository/org/jboss/redhat-fuse/fuse-springboot-patch-metadata/7.8.0.fuse-sb2-780032/fuse-springboot-patch-metadata-7.8.0.fuse-sb2-780032.xml
[INFO] [PATCH] Patch metadata found for org.jboss.redhat-fuse/fuse-springboot-bom/[7.8,7.9)
[INFO] [PATCH]  - patch contains 1 CVE fix
[INFO] [PATCH] Processing managed dependencies to apply CVE fixes... (https://nvd.nist.gov/vuln/detail/CVE-2020-xyz, https://bugzilla.redhat.com/show_bug.cgi?id=42_
[INFO] [PATCH] - CVE-2020-xyz: Jetty can be configured to expose itself on port 8080
[INFO] [PATCH]   Applying change org.eclipse.jetty/jetty-*/[9.4,9.4.32) -> 9.4.32.v20200930
[INFO] [PATCH]    - managed dependency: org.eclipse.jetty/jetty-alpn-client/9.4.30.v20200611 -> 9.4.32.v20200930
...
[INFO] [PATCH]    - managed dependency: org.eclipse.jetty/jetty-openid/9.4.30.v20200611 -> 9.4.32.v20200930
[INFO] [PATCH]   Applying change org.eclipse.jetty.http2/http2-*/[9.4,9.4.32) -> 9.4.32.v20200930
[INFO] [PATCH]    - managed dependency: org.eclipse.jetty.http2/http2-client/9.4.30.v20200611 -> 9.4.32.v20200930
...
[INFO] [PATCH] Done in 635ms

=================================================

Skipping the patch

In case when you do not wish to apply a specific patch to your project, the patch-maven-plugin provides a skip option. Assuming that you have already added patch-maven-plugin to project’s pom.xml file, and you don’t wish for the versions to be altered, you can use one of the following method to skip the patch.

  • Add the skip option to your project’s pom.xml file as follows. 
<build>
    <plugins>
        <plugin>
            <groupId>org.jboss.redhat-fuse</groupId>
            <artifactId>patch-maven-plugin</artifactId>
            <version>${version.org.jboss-redhat-fuse}</version>
            <extensions>true</extensions>
            <configuration>
                <skip>true</skip>
            </configuration>
        </plugin>
    </plugins>
</build>
  • Or use -DskipPatch option when running the mvn command as follows. 
$ mvn dependency:tree -DskipPatch
[INFO] Scanning for projects...
[INFO]
[INFO] ------< org.jboss.redhat-fuse:cve-dependency-management-module1 >-------
[INFO] Building cve-dependency-management-module1 7.8.0.fuse-sb2-780033
[INFO] --------------------------------[ jar ]---------------------------------
...

As shown in the above output, the patch-maven-plugin was not invoked, which results in the patch not being applied to the application.

Red Hat logoGithubRedditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

© 2024 Red Hat, Inc.