Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.
Chapter 4. Configuring insights-client
After you install Insights client, you must register your system with Red Hat Insights for Red Hat Enterprise Linux. Registration enables you to use Red Hat Insights for Red Hat Enterprise Linux services.
4.1. Registering your system with Red Hat Insights
You can use the insights-client command to register a system with Red Hat Insights.
As an option, you can assign a display name for your host when you register your system. The display name identifies the system in the Insights UI. If you do not assign a display name when you register the system, Insights uses the default hostname for the system.
Prerequisites
- Root-level permissions for your system.
- The Insights client is installed on your system.
Procedure
Enter the
insights-clientcommand with the--registeroption.[root@insights]# insights-client --register
Optional. To specify the display name for the system, include the
--display-nameoption. For example:[root@insights]# insights-client --register --display-name ITC-4 System display name changed from None to ITC-4
Verification
Enter the
insights-clientcommand with the--statusoption.[root@insights]# insights-client --status System is registered locally via .registered file. Registered at 2019-08-20T12:56:48.356814 Insights API confirms registration.
You can now access the cloud-based Red Hat Insights for Red Hat Enterprise Linux services.
4.2. Unregistering your system with Insights
You can unregister your system with Red Hat Insights for Red Hat Enterprise Linux. When you do so, your system information is no longer uploaded to Insights for Red Hat Enterprise Linux.
Prerequisites
- Root-level access to your system.
- Your system is registered with Insights for Red Hat Enterprise Linux.
Procedure
Enter the
insights-clientcommand with the--unregisteroption.[root@insights]# insights-client --unregister Successfully unregistered from the Red Hat Insights Service
Verification
Enter the
insights-clientcommand with the--statusoption.[root@insights]# insights-client --status System is NOT registered locally via .registered file. Unregistered at 2021-03-12T10:36:39.257300 Insights API says this machine was unregistered at 2021-03-12T00:36:39.000Z
4.3. Re-registering your system with Red Hat Insights
To re-register systems in Red Hat Insights for Red Hat Enterprise Linux, and also avoid any duplicate host entries in the Insights inventory service after re-registering, run the insights-client command twice using two options:
-
--unregister -
--register
Prerequisites
- Root-level permissions for your system.
- The Insights client is installed on your system.
Procedure
Enter the
insights-clientcommand with the--unregisteroption.[root@insights]# insights-client --unregister
Enter the
insights-clientcommand with the--registeroption.[root@insights]# insights-client --register
Verification
Successful implementation of the re-registration commands using insights-client command with the —-unregister option followed by the insights-client command with the —-register option results in the following message:
[root@insights]# Successfully uploaded report for <machine name> View the Red Hat Insights console at https://console.openshiftusgov.com/insights/
4.4. Changing the host display name
You can change the host display name as it appears in the GUI. Make this change either when you register the system with Red Hat Insights for Red Hat Enterprise Linux, or after registration. If you do not assign a display name when you register the system, Red Hat Insights for Red Hat Enterprise Linux uses the value in /etc/hostname.
This procedure is optional. Determine if you want to use a display name in addition to the default hostname.
Using the insights-client command to set the display name takes effect immediately, but does not run the Insights client.
If you obfuscate the host name, the hostname configured in /etc/hostname is obfuscated. Assign a display name so that you can identify a host even when its hostname is obfuscated.
Prerequisites
- Root-level access to the system.
Procedure
Enter the
insights-clientcommand with the--display-nameoption and specify a display name.[root@insights]# insights-client --display-name ITC-4 System display name changed from None to ITC-4
To create a display name that contains spaces, use double quotes.
[root@insights]# insights-client --display-name "ITC-4 B9 4th floor" System display name changed from None to ITC-4 B9 4th floor
4.5. Displaying the client version
You can display the client version and client core version.
Prerequisites
- Root-level access to your system.
Procedure
Enter the
insights-clientcommand with the--versionoption.[root@insights]# insights-client --version Client: 3.0.6-0 Core: 3.0.121-1
Additional resources
