Chapter 3. Dynamically provisioned OpenShift Data Foundation deployed on Red Hat Virtualization

Procedure

1. Identify the OSD that needs to be replaced and the OpenShift Container Platform node that has the OSD scheduled on it.

   $ oc get -n openshift-storage pods -l app=rook-ceph-osd -o wide

   Copy to Clipboard Toggle word wrap

   Example output:

   rook-ceph-osd-0-6d77d6c7c6-m8xj6    0/1    CrashLoopBackOff    0    24h   10.129.0.16   compute-2   <none>           <none>
   rook-ceph-osd-1-85d99fb95f-2svc7    1/1    Running             0    24h   10.128.2.24   compute-0   <none>           <none>
   rook-ceph-osd-2-6c66cdb977-jp542    1/1    Running             0    24h   10.130.0.18   compute-1   <none>           <none>

   Copy to Clipboard Toggle word wrap

   In this example, rook-ceph-osd-0-6d77d6c7c6-m8xj6 needs to be replaced and compute-2 is the OpenShift Container platform node on which the OSD is scheduled.

   Note

   If the OSD to be replaced is healthy, the status of the pod will be Running.

2. Scale down the OSD deployment for the OSD to be replaced.

   Each time you want to replace the OSD, update the osd_id_to_remove parameter with the OSD ID, and repeat this step.

   $ osd_id_to_remove=0

   Copy to Clipboard Toggle word wrap

   $ oc scale -n openshift-storage deployment rook-ceph-osd-${osd_id_to_remove} --replicas=0

   Copy to Clipboard Toggle word wrap

   where, osd_id_to_remove is the integer in the pod name immediately after the rook-ceph-osd prefix. In this example, the deployment name is rook-ceph-osd-0.

   Example output:

   deployment.extensions/rook-ceph-osd-0 scaled

   Copy to Clipboard Toggle word wrap

3. Verify that the rook-ceph-osd pod is terminated.

   $ oc get -n openshift-storage pods -l ceph-osd-id=${osd_id_to_remove}

   Copy to Clipboard Toggle word wrap

   Example output:

   No resources found.

   Copy to Clipboard Toggle word wrap
   Important

   If the rook-ceph-osd pod is in terminating state, use the force option to delete the pod.

   $ oc delete pod rook-ceph-osd-0-6d77d6c7c6-m8xj6 --force --grace-period=0

   Copy to Clipboard Toggle word wrap

   Example output:

   warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
     pod "rook-ceph-osd-0-6d77d6c7c6-m8xj6" force deleted

   Copy to Clipboard Toggle word wrap

4. Remove the old OSD from the cluster so that you can add a new OSD.

   1. Delete any old ocs-osd-removal jobs.

      $ oc delete -n openshift-storage job ocs-osd-removal-job

      Copy to Clipboard Toggle word wrap

      Example output:

      job.batch "ocs-osd-removal-job"

      Copy to Clipboard Toggle word wrap

   2. Navigate to the openshift-storage project.

      $ oc project openshift-storage

      Copy to Clipboard Toggle word wrap

   3. Remove the old OSD from the cluster.

      $ oc process -n openshift-storage ocs-osd-removal -p FAILED_OSD_IDS=${osd_id_to_remove} -p FORCE_OSD_REMOVAL=false |oc create -n openshift-storage -f -

      Copy to Clipboard Toggle word wrap

      The FORCE_OSD_REMOVAL value must be changed to “true” in clusters that only have three OSDs, or clusters with insufficient space to restore all three replicas of the data after the OSD is removed.

      Warning

      This step results in OSD being completely removed from the cluster. Ensure that the correct value of osd_id_to_remove is provided.

5. Verify that the OSD was removed successfully by checking the status of the ocs-osd-removal-job pod.

   A status of Completed confirms that the OSD removal job succeeded.

   $ oc get pod -l job-name=ocs-osd-removal-job -n openshift-storage

   Copy to Clipboard Toggle word wrap

6. Ensure that the OSD removal is completed.

   $ oc logs -l job-name=ocs-osd-removal-job -n openshift-storage --tail=-1 | egrep -i 'completed removal'

   Copy to Clipboard Toggle word wrap

   Example output:

   2022-05-10 06:50:04.501511 I | cephosd: completed removal of OSD 0

   Copy to Clipboard Toggle word wrap
   Important

   If the ocs-osd-removal-job fails and the pod is not in the expected Completed state, check the pod logs for further debugging.

   For example:

   # oc logs -l job-name=ocs-osd-removal-job -n openshift-storage --tail=-1'

   Copy to Clipboard Toggle word wrap

7. If encryption was enabled at the time of install, remove dm-crypt managed device-mapper mapping from the OSD devices that are removed from the respective OpenShift Data Foundation nodes.

   1. Get the PVC name(s) of the replaced OSD(s) from the logs of ocs-osd-removal-job pod.

      $ oc logs -l job-name=ocs-osd-removal-job -n openshift-storage --tail=-1  |egrep -i ‘pvc|deviceset’

      Copy to Clipboard Toggle word wrap

      Example output:

      2021-05-12 14:31:34.666000 I | cephosd: removing the OSD PVC "ocs-deviceset-xxxx-xxx-xxx-xxx"

      Copy to Clipboard Toggle word wrap

   2. For each of the previously identified nodes, do the following:

      1. Create a debug pod and chroot to the host on the storage node.

         $ oc debug node/<node name>

         Copy to Clipboard Toggle word wrap

         <node name>

         Is the name of the node.

         $ chroot /host

         Copy to Clipboard Toggle word wrap

      2. Find a relevant device name based on the PVC names identified in the previous step.

         $ dmsetup ls| grep <pvc name>

         Copy to Clipboard Toggle word wrap

         <pvc name>

         Is the name of the PVC.

         Example output:

         ocs-deviceset-xxx-xxx-xxx-xxx-block-dmcrypt (253:0)

         Copy to Clipboard Toggle word wrap

      3. Remove the mapped device.

         $ cryptsetup luksClose --debug --verbose ocs-deviceset-xxx-xxx-xxx-xxx-block-dmcrypt

         Copy to Clipboard Toggle word wrap
         Important

         If the above command gets stuck due to insufficient privileges, run the following commands:

         • Press CTRL+Z to exit the above command.

         • Find the PID of the process which was stuck.

           $ ps -ef | grep crypt

           Copy to Clipboard Toggle word wrap

         • Terminate the process using the kill command.

           $ kill -9 <PID>

           Copy to Clipboard Toggle word wrap

           <PID>

           Is the process ID.

         • Verify that the device name is removed.

           $ dmsetup ls

           Copy to Clipboard Toggle word wrap

8. Delete the ocs-osd-removal job.

   $ oc delete -n openshift-storage job ocs-osd-removal-job

   Copy to Clipboard Toggle word wrap

   Example output:

   job.batch "ocs-osd-removal-job" deleted

   Copy to Clipboard Toggle word wrap

Verfication steps

1. Verify that there is a new OSD running.

   $ oc get -n openshift-storage pods -l app=rook-ceph-osd

   Copy to Clipboard Toggle word wrap

   Example output:

   rook-ceph-osd-0-5f7f4747d4-snshw                                  1/1     Running     0          4m47s
   rook-ceph-osd-1-85d99fb95f-2svc7                                  1/1     Running     0          1d20h
   rook-ceph-osd-2-6c66cdb977-jp542                                  1/1     Running     0          1d20h

   Copy to Clipboard Toggle word wrap

2. Verify that there is a new PVC created which is in Bound state.

   $ oc get -n openshift-storage pvc

   Copy to Clipboard Toggle word wrap

3. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   1. Identify the nodes where the new OSD pods are running.

      $ oc get -n openshift-storage -o=custom-columns=NODE:.spec.nodeName pod/<OSD-pod-name>

      Copy to Clipboard Toggle word wrap

      <OSD-pod-name>

      Is the name of the OSD pod.

      For example:

      $ oc get -n openshift-storage -o=custom-columns=NODE:.spec.nodeName pod/rook-ceph-osd-0-544db49d7f-qrgqm

      Copy to Clipboard Toggle word wrap

      Example output:

      NODE
      compute-1

      Copy to Clipboard Toggle word wrap

   2. For each of the previously identified nodes, do the following:

      1. Create a debug pod and open a chroot environment for the selected host(s).

         $ oc debug node/<node name>

         Copy to Clipboard Toggle word wrap

         <node name>

         Is the name of the node.

         $ chroot /host

         Copy to Clipboard Toggle word wrap

      2. Check for the crypt keyword beside the ocs-deviceset name(s).

         $ lsblk

         Copy to Clipboard Toggle word wrap
4. Log in to OpenShift Web Console and view the storage dashboard.