Red Hat Summit Red Hat SummitSupportKonsoleEntwicklerDemo startenKontakt

Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

Chapter 5. address

This chapter describes the commands under the address command.

5.1. address group create
Link kopieren

Create a new Address Group

Usage:

openstack address group create [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty]
                                      [--description <description>]
                                      [--address <ip-address>]
                                      [--project <project>]
                                      [--project-domain <project-domain>]
                                      <name>
Copy to Clipboard Toggle word wrap

Expand
Table 5.1. Positional arguments
ValueSummary

<name>

New address group name

Expand
Table 5.2. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--description <description>

New address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Expand
Table 5.3. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.4. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.5. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.6. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.2. address group delete
Link kopieren

Delete address group(s)

Usage:

openstack address group delete [-h]
                                      <address-group> [<address-group> ...]
Copy to Clipboard Toggle word wrap

Expand
Table 5.7. Positional arguments
ValueSummary

<address-group>

Address group(s) to delete (name or id)

Expand
Table 5.8. Command arguments
ValueSummary

-h, --help

Show this help message and exit

5.3. address group list
Link kopieren

List address groups

Usage:

openstack address group list [-h] [-f {csv,json,table,value,yaml}]
                                    [-c COLUMN]
                                    [--quote {all,minimal,none,nonnumeric}]
                                    [--noindent] [--max-width <integer>]
                                    [--fit-width] [--print-empty]
                                    [--sort-column SORT_COLUMN]
                                    [--sort-ascending | --sort-descending]
                                    [--name <name>] [--project <project>]
                                    [--project-domain <project-domain>]
Copy to Clipboard Toggle word wrap

Expand
Table 5.9. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

List only address groups of given name in output

--project <project>

List address groups according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Expand
Table 5.10. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Expand
Table 5.11. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Expand
Table 5.12. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.13. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.4. address group set
Link kopieren

Set address group properties

Usage:

openstack address group set [-h] [--name <name>]
                                   [--description <description>]
                                   [--address <ip-address>]
                                   <address-group>
Copy to Clipboard Toggle word wrap

Expand
Table 5.14. Positional arguments
ValueSummary

<address-group>

Address group to modify (name or id)

Expand
Table 5.15. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

Set address group name

--description <description>

Set address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

5.5. address group show
Link kopieren

Display address group details

Usage:

openstack address group show [-h] [-f {json,shell,table,value,yaml}]
                                    [-c COLUMN] [--noindent] [--prefix PREFIX]
                                    [--max-width <integer>] [--fit-width]
                                    [--print-empty]
                                    <address-group>
Copy to Clipboard Toggle word wrap

Expand
Table 5.16. Positional arguments
ValueSummary

<address-group>

Address group to display (name or id)

Expand
Table 5.17. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Expand
Table 5.18. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.19. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.20. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.21. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.6. address group unset
Link kopieren

Unset address group properties

Usage:

openstack address group unset [-h] [--address <ip-address>]
                                     <address-group>
Copy to Clipboard Toggle word wrap

Expand
Table 5.22. Positional arguments
ValueSummary

<address-group>

Address group to modify (name or id)

Expand
Table 5.23. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--address <ip-address>

Ip address or cidr (repeat option to unset multiple addresses)

5.7. address scope create
Link kopieren

Create a new Address Scope

Usage:

openstack address scope create [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty] [--ip-version {4,6}]
                                      [--project <project>]
                                      [--project-domain <project-domain>]
                                      [--share | --no-share]
                                      <name>
Copy to Clipboard Toggle word wrap

Expand
Table 5.24. Positional arguments
ValueSummary

<name>

New address scope name

Expand
Table 5.25. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--ip-version {4,6}

Ip version (default is 4)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects (default)

Expand
Table 5.26. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.27. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.28. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.29. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.8. address scope delete
Link kopieren

Delete address scope(s)

Usage:

openstack address scope delete [-h]
                                      <address-scope> [<address-scope> ...]
Copy to Clipboard Toggle word wrap

Expand
Table 5.30. Positional arguments
ValueSummary

<address-scope>

Address scope(s) to delete (name or id)

Expand
Table 5.31. Command arguments
ValueSummary

-h, --help

Show this help message and exit

5.9. address scope list
Link kopieren

List address scopes

Usage:

openstack address scope list [-h] [-f {csv,json,table,value,yaml}]
                                    [-c COLUMN]
                                    [--quote {all,minimal,none,nonnumeric}]
                                    [--noindent] [--max-width <integer>]
                                    [--fit-width] [--print-empty]
                                    [--sort-column SORT_COLUMN]
                                    [--sort-ascending | --sort-descending]
                                    [--name <name>]
                                    [--ip-version <ip-version>]
                                    [--project <project>]
                                    [--project-domain <project-domain>]
                                    [--share | --no-share]
Copy to Clipboard Toggle word wrap

Expand
Table 5.32. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

List only address scopes of given name in output

--ip-version <ip-version>

List address scopes of given ip version networks (4 or 6)

--project <project>

List address scopes according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

List address scopes shared between projects

--no-share

List address scopes not shared between projects

Expand
Table 5.33. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Expand
Table 5.34. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Expand
Table 5.35. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.36. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.10. address scope set
Link kopieren

Set address scope properties

Usage:

openstack address scope set [-h] [--name <name>] [--share | --no-share]
                                   <address-scope>
Copy to Clipboard Toggle word wrap

Expand
Table 5.37. Positional arguments
ValueSummary

<address-scope>

Address scope to modify (name or id)

Expand
Table 5.38. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

Set address scope name

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects

5.11. address scope show
Link kopieren

Display address scope details

Usage:

openstack address scope show [-h] [-f {json,shell,table,value,yaml}]
                                    [-c COLUMN] [--noindent] [--prefix PREFIX]
                                    [--max-width <integer>] [--fit-width]
                                    [--print-empty]
                                    <address-scope>
Copy to Clipboard Toggle word wrap

Expand
Table 5.39. Positional arguments
ValueSummary

<address-scope>

Address scope to display (name or id)

Expand
Table 5.40. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Expand
Table 5.41. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.42. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.43. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.44. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

Nach oben
Red Hat logoGithubredditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können. Entdecken Sie unsere neuesten Updates.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

Theme

© 2025 Red Hat