Red Hat Summit Red Hat SummitSupportKonsoleEntwicklerDemo startenKontakt

Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

Chapter 14. Project networking with IPv6

For details, see:

14.1. IPv6 subnet options
Link kopieren

When you create IPv6 subnets in a Red Hat OpenStack Platform (RHOSP) project network you can specify address mode and Router Advertisement mode to obtain a particular result as described in the following table.

Note

RHOSP does not support IPv6 prefix delegation from an external entity in ML2/OVN deployments. You must obtain the Global Unicast Address prefix from your external prefix delegation router and set it by using the subnet-range argument during creation of a IPv6 subnet.

For example: 

openstack subnet create
--subnet-range 2002:c000:200::64
--no-dhcp
--gateway 2002:c000:2fe::
--dns-nameserver 2002:c000:2fe::
--network provider
provider-subnet-2002:c000:200::
Expand
RA ModeAddress ModeResult

ipv6_ra_mode=not set

ipv6-address-mode=slaac

The instance receives an IPv6 address from the external router (not managed by OpenStack Networking) using Stateless Address Autoconfiguration (SLAAC).

Note

OpenStack Networking supports only EUI-64 IPv6 address assignment for SLAAC. This allows for simplified IPv6 networking, as hosts self-assign addresses based on the base 64-bits plus the MAC address. You cannot create subnets with a different netmask and address_assign_type of SLAAC.

ipv6_ra_mode=not set

ipv6-address-mode=dhcpv6-stateful

The instance receives an IPv6 address and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateful.

ipv6_ra_mode=not set

ipv6-address-mode=dhcpv6-stateless

The instance receives an IPv6 address from the external router using SLAAC, and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateless.

ipv6_ra_mode=slaac

ipv6-address-mode=not-set

The instance uses SLAAC to receive an IPv6 address from OpenStack Networking (radvd).

ipv6_ra_mode=dhcpv6-stateful

ipv6-address-mode=not-set

The instance receives an IPv6 address and optional information from an external DHCPv6 server using DHCPv6 stateful.

ipv6_ra_mode=dhcpv6-stateless

ipv6-address-mode=not-set

The instance receives an IPv6 address from OpenStack Networking (radvd) using SLAAC, and optional information from an external DHCPv6 server using DHCPv6 stateless.

ipv6_ra_mode=slaac

ipv6-address-mode=slaac

The instance receives an IPv6 address from OpenStack Networking (radvd) using SLAAC.

ipv6_ra_mode=dhcpv6-stateful

ipv6-address-mode=dhcpv6-stateful

The instance receives an IPv6 address from OpenStack Networking (dnsmasq) using DHCPv6 stateful, and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateful.

ipv6_ra_mode=dhcpv6-stateless

ipv6-address-mode=dhcpv6-stateless

The instance receives an IPv6 address from OpenStack Networking (radvd) using SLAAC, and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateless.

14.2. Create an IPv6 subnet using Stateful DHCPv6
Link kopieren

You can create an IPv6 subnet in a Red Hat OpenStack (RHOSP) project network.

For example, you can create an IPv6 subnet using Stateful DHCPv6 in network named database-servers in a project named QA.

Procedure

  1. Retrieve the project ID of the Project where you want to create the IPv6 subnet: 

    $ openstack project list
    Sample output
    +----------------------------------+----------+
| ID                               | Name     |
+----------------------------------+----------+
| 25837c567ed5458fbb441d39862e1399 |    QA    |
| f59f631a77264a8eb0defc898cb836af |  admin   |
| 4e2e1951e70643b5af7ed52f3ff36539 |   demo   |
| 8561dff8310e4cd8be4b6fd03dc8acf5 | services |
+----------------------------------+----------+

  2. Retrieve a list of all networks present in OpenStack Networking (neutron), and note the name of the network where you want to host the IPv6 subnet: 

    $ openstack network list
    Sample output
    +--------------------------------------+------------------+-------------------------------------------------------------+
| id                                   | name             | subnets                                                     |
+--------------------------------------+------------------+-------------------------------------------------------------+
| 8357062a-0dc2-4146-8a7f-d2575165e363 | private          | c17f74c4-db41-4538-af40-48670069af70 10.0.0.0/24            |
| 31d61f7d-287e-4ada-ac29-ed7017a54542 | public           | 303ced03-6019-4e79-a21c-1942a460b920 172.24.4.224/28        |
| 6aff6826-4278-4a35-b74d-b0ca0cbba340 | database-servers |                                                             |
+--------------------------------------+------------------+-------------------------------------------------------------+

  3. Include the project ID, network name, and ipv6 address mode in the openstack subnet create command: 

    $ openstack subnet create --ip-version 6 --ipv6-address-mode \
dhcpv6-stateful --project 25837c567ed5458fbb441d39862e1399 \
--network database-servers --subnet-range fdf8:f53b:82e4::53/125 \
subnet_name
    Sample output
    Created a new subnet:
+-------------------+--------------------------------------------------------------+
| Field             | Value                                                        |
+-------------------+--------------------------------------------------------------+
| allocation_pools  | {"start": "fdf8:f53b:82e4::52", "end": "fdf8:f53b:82e4::56"} |
| cidr              | fdf8:f53b:82e4::53/125                                       |
| dns_nameservers   |                                                              |
| enable_dhcp       | True                                                         |
| gateway_ip        | fdf8:f53b:82e4::51                                           |
| host_routes       |                                                              |
| id                | cdfc3398-997b-46eb-9db1-ebbd88f7de05                         |
| ip_version        | 6                                                            |
| ipv6_address_mode | dhcpv6-stateful                                              |
| ipv6_ra_mode      |                                                              |
| name              |                                                              |
| network_id        | 6aff6826-4278-4a35-b74d-b0ca0cbba340                         |
| tenant_id         | 25837c567ed5458fbb441d39862e1399                             |
+-------------------+--------------------------------------------------------------+

Verification

  1. Validate this configuration by reviewing the network list: 

    $ openstack network list
    Sample output

    Note that the entry for database-servers now reflects the newly created IPv6 subnet: 

    +--------------------------------------+------------------+-------------------------------------------------------------+
| id                                   | name             | subnets                                                     |
+--------------------------------------+------------------+-------------------------------------------------------------+
| 6aff6826-4278-4a35-b74d-b0ca0cbba340 | database-servers | cdfc3398-997b-46eb-9db1-ebbd88f7de05 fdf8:f53b:82e4::50/125 |
| 8357062a-0dc2-4146-8a7f-d2575165e363 | private          | c17f74c4-db41-4538-af40-48670069af70 10.0.0.0/24            |
| 31d61f7d-287e-4ada-ac29-ed7017a54542 | public           | 303ced03-6019-4e79-a21c-1942a460b920 172.24.4.224/28        |
+--------------------------------------+------------------+-------------------------------------------------------------+
    Result

    As a result of this configuration, instances that the QA project creates can receive a DHCP IPv6 address when added to the database-servers subnet: 

    $ openstack server list
    Sample output
    +--------------------------------------+------------+--------+------------+-------------+-------------------------------------+
| ID                                   | Name       | Status | Task State | Power State | Networks                            |
+--------------------------------------+------------+--------+------------+-------------+-------------------------------------+
| fad04b7a-75b5-4f96-aed9-b40654b56e03 | corp-vm-01 | ACTIVE | -          | Running     | database-servers=fdf8:f53b:82e4::52 |
+--------------------------------------+------------+--------+------------+-------------+-------------------------------------+
Red Hat logoGithubredditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können. Entdecken Sie unsere neuesten Updates.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

Theme

© 2026 Red HatNach oben