Red Hat SummitDieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.
Chapter 94. virt-who-config
Manage Virt Who configurations
Usage
hammer virt-who-config [OPTIONS] SUBCOMMAND [ARG] ...
# hammer virt-who-config [OPTIONS] SUBCOMMAND [ARG] ...Options
-
-h,--help– Print help
94.1. virt-who-config create
Create a virt-who configuration
Usage
hammer virt-who-config create [OPTIONS]
# hammer virt-who-config create [OPTIONS]Options
-
--ahv-internal-debug BOOLEANOption Enable debugging output is required to enable AHV internal debug. It provides extra AHV debug information when both options are enabled -
--blacklist VALUE– Hypervisor blacklist, applicable only when filtering mode is set to 2. Wildcards and regular expressions are supported, multiple records must be separated by comma. -
--debug BOOLEAN– Enable debugging output -
--exclude-host-parents VALUEApplicable only for esx provider type. Hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will NOT be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. -
--filter-host-parents VALUE– Applicable only for esx provider type. Only hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. -
--filtering-mode ENUM– Hypervisor filtering mode Possible value(s):none,whitelist,blacklist -
--http-proxy VALUE– Name to search by -
--http-proxy-id NUMBER– HTTP proxy that should be used for communication between the server on which virt-who is running and the hypervisors and virtualization managers. -
--hypervisor-id ENUM– Specifies how the hypervisor will be identified. Possible value(s):hostname,uuid,hwuuid -
--hypervisor-password VALUE– Hypervisor password, required for all hypervisor types except for libvirt/kubevirt. -
--hypervisor-server VALUE– Fully qualified host name or IP address of the hypervisor -
--hypervisor-type ENUM– Hypervisor type Possible value(s):esx,hyperv,libvirt,kubevirt,ahv -
--hypervisor-username VALUE– Account name by which virt-who is to connect to the hypervisor. -
--interval ENUM– Configuration interval in minutes Possible value(s):60,120,240,480,720,1440,2880,4320 -
--kubeconfig-path VALUE– Configuration file containing details about how to connect to the cluster and authentication details. -
--location VALUE– Set the current location context for the request -
--location-id NUMBER– Set the current location context for the request -
--location-title VALUE– Set the current location context for the request -
--name VALUE– Configuration name -
--no-proxy VALUE– Ignore Proxy. A comma-separated list of hostnames or domains or ip addresses to ignore Capsule settings for. Optionally this may be set to * to bypass proxy settings for all hostnames domains or ip addresses. -
--organization VALUE– Set the current organization context for the request -
--organization-id NUMBER– Set the current organization context for the request -
--organization-title VALUE– Set the current organization context for the request -
--prism-flavor ENUM– Select the Prism flavor you are connecting to Possible value(s):central,element -
--satellite-url VALUE– Satellite server FQDN -
--whitelist VALUE– Hypervisor whitelist, applicable only when filtering mode is set to 1. Wildcards and regular expressions are supported, multiple records must be separated by comma. -
-h,--help– Print help
94.2. virt-who-config delete
Delete a virt-who configuration
Usage
hammer virt-who-config <delete|destroy> [OPTIONS]
# hammer virt-who-config <delete|destroy> [OPTIONS]Options
-
--id NUMBER– Configuration numeric identifier -
--location VALUE– Set the current location context for the request -
--location-id NUMBER– Set the current location context for the request -
--location-title VALUE– Set the current location context for the request -
--name VALUE– Name to search by -
--organization VALUE– Set the current organization context for the request -
--organization-id NUMBER– Set the current organization context for the request -
--organization-title VALUE– Set the current organization context for the request -
-h,--help– Print help
94.3. virt-who-config deploy
Download and execute script for the specified virt-who configuration
Usage
hammer virt-who-config deploy [OPTIONS]
# hammer virt-who-config deploy [OPTIONS]Options
-
--id VALUE -
--location VALUE– Set the current location context for the request -
--location-id NUMBER– Set the current location context for the request -
--location-title VALUE– Set the current location context for the request -
--name VALUE– Name to search by -
--organization VALUE– Set the current organization context for the request -
--organization-id NUMBER– Set the current organization context for the request -
--organization-title VALUE– Set the current organization context for the request -
-h,--help– Print help
94.4. virt-who-config fetch
Renders a deploy script for the specified virt-who configuration
Usage
hammer virt-who-config fetch [OPTIONS]
# hammer virt-who-config fetch [OPTIONS]Options
-
--id VALUE -
--location VALUE– Set the current location context for the request -
--location-id NUMBER– Set the current location context for the request -
--location-title VALUE– Set the current location context for the request -
--name VALUE– Name to search by -
--organization VALUE– Set the current organization context for the request -
--organization-id NUMBER– Set the current organization context for the request -
--organization-title VALUE– Set the current organization context for the request -
-h,--help– Print help -
-o,--output VALUE– File where the script will be written
94.5. virt-who-config info
Show a virt-who configuration
Usage
hammer virt-who-config <info|show> [OPTIONS]
# hammer virt-who-config <info|show> [OPTIONS]Options
-
--fields LIST– Show specified fields or predefined field sets only. (See below) -
--id VALUE -
--location VALUE– Set the current location context for the request -
--location-id NUMBER– Set the current location context for the request -
--location-title VALUE– Set the current location context for the request -
--name VALUE– Name to search by -
--organization VALUE– Set the current organization context for the request -
--organization-id NUMBER– Set the current organization context for the request -
--organization-title VALUE– Set the current organization context for the request -
-h,--help– Print help
Predefined field sets
| FIELDS | ALL | DEFAULT |
|---|---|---|
| General information/id | x | x |
| General information/name | x | x |
| General information/hypervisor type | x | x |
| General information/hypervisor server | x | x |
| General information/hypervisor username | x | x |
| General information/configuration file | x | x |
| General information/ahv prism flavor | x | x |
| General information/enable ahv debug | x | x |
| General information/status | x | x |
| Schedule/interval | x | x |
| Schedule/last report at | x | x |
| Connection/satellite server | x | x |
| Connection/hypervisor id | x | x |
| Connection/filtering | x | x |
| Connection/excluded hosts | x | x |
| Connection/filtered hosts | x | x |
| Connection/filter host parents | x | x |
| Connection/exclude host parents | x | x |
| Connection/debug mode | x | x |
| Connection/ignore proxy | x | x |
| Http proxy/http proxy id | x | x |
| Http proxy/http proxy name | x | x |
| Http proxy/http proxy url | x | x |
| Locations/ | x | x |
| Organizations/ | x | x |
94.6. virt-who-config list
List of virt-who configurations
Usage
hammer virt-who-config <list|index> [OPTIONS]
# hammer virt-who-config <list|index> [OPTIONS]Options
-
--fields LIST– Show specified fields or predefined field sets only. (See below) -
--location VALUE– Set the current location context for the request -
--location-id NUMBER– Set the current location context for the request -
--location-title VALUE– Set the current location context for the request -
--order VALUE– Sort and order by a searchable field, e.g.<field> DESC -
--organization VALUE– Set the current organization context for the request -
--organization-id NUMBER– Set the current organization context for the request -
--organization-title VALUE– Set the current organization context for the request -
--page NUMBER– Page number, starting at 1 -
--per-page VALUE– Number of results per page to return,allto return all results -
--search VALUE– Filter results -
-h,--help– Print help
Predefined field sets
| FIELDS | ALL | DEFAULT | THIN |
|---|---|---|---|
| Id | x | x | x |
| Name | x | x | x |
| Interval | x | x | |
| Status | x | x | |
| Last report at | x | x |
94.7. virt-who-config update
Update a virt-who configuration
Usage
hammer virt-who-config update [OPTIONS]
# hammer virt-who-config update [OPTIONS]Options
-
--ahv-internal-debug BOOLEANOption Enable debugging output is required to enable AHV internal debug. It provides extra AHV debug information when both options are enabled -
--blacklist VALUE– Hypervisor blacklist, applicable only when filtering mode is set to 2. Wildcards and regular expressions are supported, multiple records must be separated by comma. -
--debug BOOLEAN– Enable debugging output -
--exclude-host-parents VALUEApplicable only for esx provider type. Hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will NOT be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. -
--filter-host-parents VALUE– Applicable only for esx provider type. Only hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. -
--filtering-mode ENUM– Hypervisor filtering mode Possible value(s):none,whitelist,blacklist -
--http-proxy VALUE– Name to search by -
--http-proxy-id NUMBER– HTTP proxy that should be used for communication between the server on which virt-who is running and the hypervisors and virtualization managers. -
--hypervisor-id ENUM– Specifies how the hypervisor will be identified. Possible value(s):hostname,uuid,hwuuid -
--hypervisor-password VALUE– Hypervisor password, required for all hypervisor types except for libvirt/kubevirt. -
--hypervisor-server VALUE– Fully qualified host name or IP address of the hypervisor -
--hypervisor-type ENUM– Hypervisor type Possible value(s):esx,hyperv,libvirt,kubevirt,ahv -
--hypervisor-username VALUE– Account name by which virt-who is to connect to the hypervisor. -
--id NUMBER– Configuration numeric identifier -
--interval ENUM– Configuration interval in minutes Possible value(s):60,120,240,480,720,1440,2880,4320 -
--kubeconfig-path VALUE– Configuration file containing details about how to connect to the cluster and authentication details. -
--location VALUE– Set the current location context for the request -
--location-id NUMBER– Set the current location context for the request -
--location-title VALUE– Set the current location context for the request -
--name VALUE– Configuration name -
--new-name VALUE– Configuration name -
--no-proxy VALUE– Ignore Proxy. A comma-separated list of hostnames or domains or ip addresses to ignore Capsule settings for. Optionally this may be set to * to bypass proxy settings for all hostnames domains or ip addresses. -
--organization VALUE– Set the current organization context for the request -
--organization-id NUMBER– Set the current organization context for the request -
--organization-title VALUE– Set the current organization context for the request -
--prism-flavor ENUM– Select the Prism flavor you are connecting to Possible value(s):central,element -
--satellite-url VALUE– Satellite server FQDN -
--whitelist VALUE– Hypervisor whitelist, applicable only when filtering mode is set to 1. Wildcards and regular expressions are supported, multiple records must be separated by comma. -
-h,--help– Print help
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}