Red Hat Summit Red Hat SummitSupportKonsoleEntwicklerDemo startenKontakt

Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

16.2. Migrating Red Hat Virtualization Databases to Remote Servers

16.2.1. Migrating the Manager Database to a Remote Server
Link kopieren

You can migrate the Manager (engine) database to a remote database server after the Red Hat Virtualization Manager has been initially configured. Use engine-backup to create a database backup and restore it on the new database server.

The new database server must have Red Hat Enterprise Linux 7 installed and the required repositories enabled:

16.2.1.1. Enabling the Red Hat Virtualization Manager Repositories
Link kopieren

Register the system with Red Hat Subscription Manager, attach the Red Hat Virtualization Manager subscription, and enable Manager repositories.

Procedure

  1. Register your system with the Content Delivery Network, entering your Customer Portal user name and password when prompted: 

    # subscription-manager register
    Note

    If you are using an IPv6 network, use an IPv6 transition mechanism to access the Content Delivery Network and subscription manager.

  2. Find the Red Hat Virtualization Manager subscription pool and record the pool ID: 

    # subscription-manager list --available

  3. Use the pool ID to attach the subscription to the system: 

    # subscription-manager attach --pool=pool_id
    Note

    To view currently attached subscriptions: 

    # subscription-manager list --consumed

    To list all enabled repositories: 

    # yum repolist

  4. Configure the repositories: 

    # subscription-manager repos \
    --disable='*' \
    --enable=rhel-7-server-rpms \
    --enable=rhel-7-server-supplementary-rpms \
    --enable=rhel-7-server-rhv-4.3-manager-rpms \
    --enable=rhel-7-server-rhv-4-manager-tools-rpms \
    --enable=rhel-7-server-ansible-2.9-rpms \
    --enable=jb-eap-7.2-for-rhel-7-server-rpms
Migrating the Manager Database to a Remote Server

  1. Log in to the Red Hat Virtualization Manager machine and stop the ovirt-engine service so that it does not interfere with the engine backup: 

    # systemctl stop ovirt-engine.service

  2. Create the engine database backup: 

    # engine-backup --scope=files --scope=db --mode=backup --file=file_name --log=log_file_name

  3. Copy the backup file to the new database server: 

    # scp /tmp/engine.dump root@new.database.server.com:/tmp

  4. Log in to the new database server and install engine-backup: 

    # yum install ovirt-engine-tools-backup

  5. Restore the database on the new database server. file_name is the backup file copied from the Manager. 

    # engine-backup --mode=restore --scope=files --scope=db --file=file_name --log=log_file_name --provision-db --no-restore-permissions

  6. Now that the database has been migrated, start the ovirt-engine service: 

    # systemctl start ovirt-engine.service

16.2.2. Migrating the Self-Hosted Engine Database to a Remote Server
Link kopieren

You can migrate the engine database of a self-hosted engine to a remote database server after the Red Hat Virtualization Manager has been initially configured. Use engine-backup to create a database backup and restore it on the new database server.

The new database server must have Red Hat Enterprise Linux 7 installed and the required repositories enabled:

Enabling the Red Hat Virtualization Manager Repositories

Register the system with Red Hat Subscription Manager, attach the Red Hat Virtualization Manager subscription, and enable Manager repositories.

Procedure

  1. Register your system with the Content Delivery Network, entering your Customer Portal user name and password when prompted: 

    # subscription-manager register
    Note

    If you are using an IPv6 network, use an IPv6 transition mechanism to access the Content Delivery Network and subscription manager.

  2. Find the Red Hat Virtualization Manager subscription pool and record the pool ID: 

    # subscription-manager list --available

  3. Use the pool ID to attach the subscription to the system: 

    # subscription-manager attach --pool=pool_id
    Note

    To view currently attached subscriptions: 

    # subscription-manager list --consumed

    To list all enabled repositories: 

    # yum repolist

  4. Configure the repositories: 

    # subscription-manager repos \
    --disable='*' \
    --enable=rhel-7-server-rpms \
    --enable=rhel-7-server-supplementary-rpms \
    --enable=rhel-7-server-rhv-4.3-manager-rpms \
    --enable=rhel-7-server-rhv-4-manager-tools-rpms \
    --enable=rhel-7-server-ansible-2.9-rpms \
    --enable=jb-eap-7.2-for-rhel-7-server-rpms
Migrating the Self-Hosted Engine Database to a Remote Server

  1. Log in to a self-hosted engine node and place the environment into global maintenance mode. This disables the High Availability agents and prevents the Manager virtual machine from being migrated during the procedure: 

    # hosted-engine --set-maintenance --mode=global

  2. Log in to the Red Hat Virtualization Manager machine and stop the ovirt-engine service so that it does not interfere with the engine backup: 

    # systemctl stop ovirt-engine.service

  3. Create the engine database backup: 

    # engine-backup --scope=files --scope=db --mode=backup --file=file_name --log=backup_log_name

  4. Copy the backup file to the new database server: 

    # scp /tmp/engine.dump root@new.database.server.com:/tmp

  5. Log in to the new database server and install engine-backup: 

    # yum install ovirt-engine-tools-backup

  6. Restore the database on the new database server. file_name is the backup file copied from the Manager. 

    # engine-backup --mode=restore --scope=files --scope=db --file=file_name --log=restore_log_name --provision-db --no-restore-permissions

  7. Now that the database has been migrated, start the ovirt-engine service: 

    # systemctl start ovirt-engine.service

  8. Log in to a self-hosted engine node and turn off maintenance mode, enabling the High Availability agents: 

    # hosted-engine --set-maintenance --mode=none

16.2.3. Migrating Data Warehouse to a Separate Machine
Link kopieren

This section describes how to migrate the Data Warehouse database and service from the Red Hat Virtualization Manager to a separate machine. Hosting the Data Warehouse service on a separate machine reduces the load on each individual machine, and allows each service to avoid potential conflicts caused by sharing CPU and memory resources with other processes.

You can migrate the Data Warehouse service and connect it with the existing Data Warehouse database (ovirt_engine_history), or you can migrate the Data Warehouse database to the separate machine before migrating the Data Warehouse service. If the Data Warehouse database is hosted on the Manager, migrating the database in addition to the Data Warehouse service further reduces the competition for resources on the Manager machine. You can migrate the database to the same machine onto which you will migrate the Data Warehouse service, or to a machine that is separate from both the Manager machine and the new Data Warehouse service machine.

16.2.3.1. Migrating the Data Warehouse Database to a Separate Machine
Link kopieren

Migrate the Data Warehouse database (ovirt_engine_history) before you migrate the Data Warehouse service. Use engine-backup to create a database backup and restore it on the new database machine. For more information on engine-backup, run engine-backup --help.

To migrate the Data Warehouse service only, see Section 16.2.3.2, “Migrating the Data Warehouse Service to a Separate Machine”.

The new database server must have Red Hat Enterprise Linux 7 installed. Enable the required repositories on the new database server.

Enabling the Red Hat Virtualization Manager Repositories

Register the system with Red Hat Subscription Manager, attach the Red Hat Virtualization Manager subscription, and enable Manager repositories.

Procedure

  1. Register your system with the Content Delivery Network, entering your Customer Portal user name and password when prompted: 

    # subscription-manager register
    Note

    If you are using an IPv6 network, use an IPv6 transition mechanism to access the Content Delivery Network and subscription manager.

  2. Find the Red Hat Virtualization Manager subscription pool and record the pool ID: 

    # subscription-manager list --available

  3. Use the pool ID to attach the subscription to the system: 

    # subscription-manager attach --pool=pool_id
    Note

    To view currently attached subscriptions: 

    # subscription-manager list --consumed

    To list all enabled repositories: 

    # yum repolist

  4. Configure the repositories: 

    # subscription-manager repos \
    --disable='*' \
    --enable=rhel-7-server-rpms \
    --enable=rhel-7-server-supplementary-rpms \
    --enable=rhel-7-server-rhv-4.3-manager-rpms \
    --enable=rhel-7-server-rhv-4-manager-tools-rpms \
    --enable=rhel-7-server-ansible-2.9-rpms \
    --enable=jb-eap-7.2-for-rhel-7-server-rpms
Migrating the Data Warehouse Database to a Separate Machine

  1. Create a backup of the Data Warehouse database and configuration files on the Manager: 

    # engine-backup --mode=backup --scope=dwhdb --scope=files --file=file_name --log=log_file_name

  2. Copy the backup file from the Manager to the new machine: 

    # scp /tmp/file_name root@new.dwh.server.com:/tmp

  3. Install engine-backup on the new machine: 

    # yum install ovirt-engine-tools-backup

  4. Install the PostgreSQL server package: 

    # yum install rh-postgresql10 rh-postgresql10-postgresql-contrib

  5. Initialize the PostgreSQL database, start the postgresql service, and ensure that this service starts on boot: 

    # scl enable rh-postgresql10 -- postgresql-setup --initdb
# systemctl enable rh-postgresql10-postgresql
# systemctl start rh-postgresql10-postgresql

  6. Restore the Data Warehouse database on the new machine. file_name is the backup file copied from the Manager. 

    # engine-backup --mode=restore --scope=files --scope=dwhdb --file=file_name --log=log_file_name --provision-dwh-db --no-restore-permissions

The Data Warehouse database is now hosted on a separate machine from that on which the Manager is hosted. After successfully restoring the Data Warehouse database, a prompt instructs you to run the engine-setup command. Before running this command, migrate the Data Warehouse service.

16.2.3.2. Migrating the Data Warehouse Service to a Separate Machine
Link kopieren

You can migrate the Data Warehouse service installed and configured on the Red Hat Virtualization Manager to a separate machine. Hosting the Data Warehouse service on a separate machine helps to reduce the load on the Manager machine.

Notice that this procedure migrates the Data Warehouse service only.

To migrate the Data Warehouse database (ovirt_engine_history) prior to migrating the Data Warehouse service, see Section 16.2.3.1, “Migrating the Data Warehouse Database to a Separate Machine”.

Prerequisites

  • You must have installed and configured the Manager and Data Warehouse on the same machine.

  • To set up the new Data Warehouse machine, you must have the following:

    • The password from the Manager’s /etc/ovirt-engine/engine.conf.d/10-setup-database.conf file.
    • Allowed access from the Data Warehouse machine to the Manager database machine’s TCP port 5432.
    • The username and password for the Data Warehouse database from the Manager’s /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf file. If you migrated the ovirt_engine_history database using Section 16.2.3.1, “Migrating the Data Warehouse Database to a Separate Machine”, the backup includes these credentials, which you defined during the database setup on that machine.

Installing this scenario requires four steps:

  1. Setting up the New Data Warehouse Machine
  2. Stopping the Data Warehouse service on the Manager machine
  3. Configuring the new Data Warehouse machine
  4. Disabling the Data Warehouse package on the Manager machine
16.2.3.2.1. Setting up the New Data Warehouse Machine
Link kopieren

Enable the Red Hat Virtualization repositories and install the Data Warehouse setup package on a Red Hat Enterprise Linux 7 machine:

  1. Enable the required repositories:

    1. Register your system with the Content Delivery Network, entering your Customer Portal user name and password when prompted: 

      # subscription-manager register

    2. Find the Red Hat Virtualization Manager subscription pool and record the pool ID: 

      # subscription-manager list --available

    3. Use the pool ID to attach the subscription to the system: 

      # subscription-manager attach --pool=pool_id

    4. Configure the repositories: 

      # subscription-manager repos \
    --disable='*' \
    --enable=rhel-7-server-rpms \
    --enable=rhel-7-server-supplementary-rpms \
    --enable=rhel-7-server-rhv-4.3-manager-rpms \
    --enable=rhel-7-server-rhv-4-manager-tools-rpms \
    --enable=rhel-7-server-ansible-2.9-rpms \
    --enable=jb-eap-7.2-for-rhel-7-server-rpms

  2. Ensure that all packages currently installed are up to date: 

    # yum update

  3. Install the ovirt-engine-dwh-setup package: 

    # yum install ovirt-engine-dwh-setup
16.2.3.2.2. Stopping the Data Warehouse Service on the Manager Machine
Link kopieren

  1. Stop the Data Warehouse service: 

    # systemctl stop ovirt-engine-dwhd.service

  2. If the database is hosted on a remote machine, you must manually grant access by editing the postgres.conf file. Edit the /var/opt/rh/rh-postgresql10/lib/pgsql/data/postgresql.conf file and modify the listen_addresses line so that it matches the following: 

    listen_addresses = '*'

    If the line does not exist or has been commented out, add it manually.

    If the database is hosted on the Manager machine and was configured during a clean setup of the Red Hat Virtualization Manager, access is granted by default.

    See Section 16.2.3.1, “Migrating the Data Warehouse Database to a Separate Machine” for more information on how to configure and migrate the Data Warehouse database.

  3. Restart the postgresql service: 

    # systemctl restart rh-postgresql10-postgresql
16.2.3.2.3. Configuring the New Data Warehouse Machine
Link kopieren

The order of the options or settings shown in this section may differ depending on your environment.

  1. If you are migrating both the ovirt_engine_history database and the Data Warehouse service to the same machine, run the following, otherwise proceed to the next step. 

    # sed -i '/^ENGINE_DB_/d' \
        /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf

# sed -i \
     -e 's;^\(OVESETUP_ENGINE_CORE/enable=bool\):True;\1:False;' \
     -e '/^OVESETUP_CONFIG\/fqdn/d' \
     /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf

  2. Run the engine-setup command to begin configuration of Data Warehouse on the machine: 

    # engine-setup

  3. Press Enter to configure Data Warehouse: 

    Configure Data Warehouse on this host (Yes, No) [Yes]:

  4. Press Enter to accept the automatically detected host name, or enter an alternative host name and press Enter: 

    Host fully qualified DNS name of this server [autodetected host name]:

  5. Press Enter to automatically configure the firewall, or type No and press Enter to maintain existing settings: 

    Setup can automatically configure the firewall on this system.
Note: automatic configuration of the firewall may overwrite current settings.
Do you want Setup to configure the firewall? (Yes, No) [Yes]:

    If you choose to automatically configure the firewall, and no firewall managers are active, you are prompted to select your chosen firewall manager from a list of supported options. Type the name of the firewall manager and press Enter. This applies even in cases where only one option is listed.

  6. Enter the fully qualified domain name and password for the Manager. Press Enter to accept the default values in each other field: 

    Host fully qualified DNS name of the engine server []: engine-fqdn
Setup needs to do some actions on the remote engine server. Either automatically, using ssh as root to access it, or you will be prompted to manually perform each such action.
Please choose one of the following:
1 - Access remote engine server using ssh as root
2 - Perform each action manually, use files to copy content around
(1, 2) [1]:
ssh port on remote engine server [22]:
root password on remote engine server engine-fqdn: password

  7. Enter the FQDN and password for the Manager database machine. Press Enter to accept the default values in each other field: 

    Engine database host []: manager-db-fqdn
Engine database port [5432]:
Engine database secured connection (Yes, No) [No]:
Engine database name [engine]:
Engine database user [engine]:
Engine database password: password

  8. Confirm your installation settings: 

    Please confirm installation settings (OK, Cancel) [OK]:

The Data Warehouse service is now configured on the remote machine. Proceed to disable the Data Warehouse service on the Manager machine.

16.2.3.2.4. Disabling the Data Warehouse Service on the Manager Machine
Link kopieren

  1. On the Manager machine, restart the Manager: 

    # service ovirt-engine restart

  2. Run the following command to modify the file /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf and set the options to False: 

    # sed -i \
     -e 's;^\(OVESETUP_DWH_CORE/enable=bool\):True;\1:False;' \
     -e 's;^\(OVESETUP_DWH_CONFIG/remoteEngineConfigured=bool\):True;\1:False;' \
     /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf

  3. Disable the Data Warehouse service: 

    # systemctl disable ovirt-engine-dwhd.service

  4. Remove the Data Warehouse files: 

    # rm -f /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/* .conf /var/lib/ovirt-engine-dwh/backups/*

The Data Warehouse service is now hosted on a separate machine from the Manager.

Red Hat logoGithubredditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können. Entdecken Sie unsere neuesten Updates.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

Theme

© 2026 Red HatNach oben