Virtualization

Procedure

1. From the Administrator perspective, click Operators → OperatorHub.
2. In the Filter by keyword field, type OpenShift Virtualization.
3. Select the OpenShift Virtualization tile.
4. Read the information about the Operator and click Install.

5. On the Install Operator page:

   1. Select stable from the list of available Update Channel options. This ensures that you install the version of OpenShift Virtualization that is compatible with your OpenShift Container Platform version.

   2. For Installed Namespace, ensure that the Operator recommended namespace option is selected. This installs the Operator in the mandatory openshift-cnv namespace, which is automatically created if it does not exist.

      Warning

      Attempting to install the OpenShift Virtualization Operator in a namespace other than openshift-cnv causes the installation to fail.

   3. For Approval Strategy, it is highly recommended that you select Automatic, which is the default value, so that OpenShift Virtualization automatically updates when a new version is available in the stable update channel.

      While it is possible to select the Manual approval strategy, this is inadvisable because of the high risk that it presents to the supportability and functionality of your cluster. Only select Manual if you fully understand these risks and cannot use Automatic.

      Warning

      Because OpenShift Virtualization is only supported when used with the corresponding OpenShift Container Platform version, missing OpenShift Virtualization updates can cause your cluster to become unsupported.

6. Click Install to make the Operator available to the openshift-cnv namespace.
7. When the Operator installs successfully, click Create HyperConverged.
8. Optional: Configure Infra and Workloads node placement options for OpenShift Virtualization components.
9. Click Create to launch OpenShift Virtualization.

Procedure

1. Create a YAML file that contains the following manifest:

   apiVersion: v1
   kind: Namespace
   metadata:
     name: openshift-cnv
   ---
   apiVersion: operators.coreos.com/v1
   kind: OperatorGroup
   metadata:
     name: kubevirt-hyperconverged-group
     namespace: openshift-cnv
   spec:
     targetNamespaces:
       - openshift-cnv
   ---
   apiVersion: operators.coreos.com/v1alpha1
   kind: Subscription
   metadata:
     name: hco-operatorhub
     namespace: openshift-cnv
   spec:
     source: redhat-operators
     sourceNamespace: openshift-marketplace
     name: kubevirt-hyperconverged
     startingCSV: kubevirt-hyperconverged-operator.v4.9.7
     channel: "stable" 1

   1

   Using the stable channel ensures that you install the version of OpenShift Virtualization that is compatible with your OpenShift Container Platform version.

2. Create the required Namespace, OperatorGroup, and Subscription objects for OpenShift Virtualization by running the following command:

   $ oc apply -f <file name>.yaml

Procedure

1. Create a YAML file that contains the following manifest:

   apiVersion: hco.kubevirt.io/v1beta1
   kind: HyperConverged
   metadata:
     name: kubevirt-hyperconverged
     namespace: openshift-cnv
   spec:

2. Deploy the OpenShift Virtualization Operator by running the following command:

   $ oc apply -f <file_name>.yaml

Procedure

1. From the OpenShift Container Platform web console, select openshift-cnv from the Projects list.
2. Navigate to the Operators → Installed Operators page.
3. Click OpenShift Virtualization.
4. Click the OpenShift Virtualization Operator Deployment tab.
5. Click the Options menu in the row containing the kubevirt-hyperconverged custom resource. In the expanded menu, click Delete HyperConverged Cluster.
6. Click Delete in the confirmation window.
7. Navigate to the Workloads → Pods page to verify that only the Operator pods are running.

8. Open a terminal window and clean up the remaining resources by running the following command:

   $ oc delete apiservices v1alpha3.subresources.kubevirt.io -n openshift-cnv

Procedure

1. Navigate to the Operators → OperatorHub page.
2. Search for OpenShift Virtualization and then select it.
3. Click Uninstall.

Procedure

1. Navigate to Administration → Namespaces.
2. Locate the namespace that you want to delete in the list of namespaces.
3. On the far right side of the namespace listing, select Delete Namespace from the Options menu .
4. When the Delete Namespace pane opens, enter the name of the namespace that you want to delete in the field.
5. Click Delete.

Procedure

1. Delete the HyperConverged custom resource:

   $ oc delete HyperConverged kubevirt-hyperconverged -n openshift-cnv

2. Delete the subscription of the OpenShift Virtualization operator in the Operator Lifecycle Manager (OLM):

   $ oc delete subscription kubevirt-hyperconverged -n openshift-cnv

3. Set the cluster service version (CSV) name for OpenShift Virtualization as an environment variable:

   $ CSV_NAME=$(oc get csv -n openshift-cnv -o=jsonpath="{.items[0].metadata.name}")

4. Delete the CSV from the OpenShift Virtualization cluster by specifying the CSV name from the previous step:

   $ oc delete csv ${CSV_NAME} -n openshift-cnv

   OpenShift Virtualization is uninstalled when a confirmation message indicates that the CSV was deleted successfully:

   Example output

   clusterserviceversion.operators.coreos.com "kubevirt-hyperconverged-operator.v4.9.7" deleted

Procedure

1. To open the HyperConverged CR in your default editor, run the following command:

   $ oc edit hco -n openshift-cnv kubevirt-hyperconverged

2. Edit the workloadUpdateStrategy stanza of the HyperConverged CR. For example:

   apiVersion: hco.kubevirt.io/v1beta1
   kind: HyperConverged
   metadata:
     name: kubevirt-hyperconverged
   spec:
     workloadUpdateStrategy:
       workloadUpdateMethods: 1
       - LiveMigrate 2
       - Evict 3
       batchEvictionSize: 10 4
       batchEvictionInterval: "1m0s" 5
   ...

   1

   The methods that can be used to perform automated workload updates. The available values are LiveMigrate and Evict. If you enable both options as shown in this example, updates use LiveMigrate for VMIs that support live migration and Evict for any VMIs that do not support live migration. To disable automatic workload updates, you can either remove the workloadUpdateStrategy stanza or set workloadUpdateMethods: [] to leave the array empty.

   2

   The least disruptive update method. VMIs that support live migration are updated by migrating the virtual machine (VM) guest into a new pod with the updated components enabled. If LiveMigrate is the only workload update method listed, VMIs that do not support live migration are not disrupted or updated.

   3

   A disruptive method that shuts down VMI pods during upgrade. Evict is the only update method available if live migration is not enabled in the cluster. If a VMI is controlled by a VirtualMachine object that has runStrategy: always configured, a new VMI is created in a new pod with updated components.

   4

   The number of VMIs that can be forced to be updated at a time by using the Evict method. This does not apply to the LiveMigrate method.

   5

   The interval to wait before evicting the next batch of workloads. This does not apply to the LiveMigrate method.

   Note

   You can configure live migration limits and timeouts by editing the spec.liveMigrationConfig stanza of the HyperConverged CR.

3. To apply your changes, save and exit the editor.

Procedure

1. In the Administrator perspective of the OpenShift Container Platform web console, navigate to Operators → Installed Operators.
2. Operators that have a pending update display a status with Upgrade available. Click the name of the Operator you want to update.
3. Click the Subscription tab. Any update requiring approval are displayed next to Upgrade Status. For example, it might display 1 requires approval.
4. Click 1 requires approval, then click Preview Install Plan.
5. Review the resources that are listed as available for update. When satisfied, click Approve.
6. Navigate back to the Operators → Installed Operators page to monitor the progress of the update. When complete, the status changes to Succeeded and Up to date.

Procedure

1. Run the following command:

   $ oc get csv -n openshift-cnv

2. Review the output, checking the PHASE field. For example:

   Example output

   VERSION  REPLACES                                        PHASE
   4.9.0    kubevirt-hyperconverged-operator.v4.8.2         Installing
   4.9.0    kubevirt-hyperconverged-operator.v4.9.0         Replacing

3. Optional: Monitor the aggregated status of all OpenShift Virtualization component conditions by running the following command:

   $ oc get hco -n openshift-cnv kubevirt-hyperconverged \
   -o=jsonpath='{range .status.conditions[*]}{.type}{"\t"}{.status}{"\t"}{.message}{"\n"}{end}'

   A successful upgrade results in the following output:

   Example output

   ReconcileComplete  True  Reconcile completed successfully
   Available          True  Reconcile completed successfully
   Progressing        False Reconcile completed successfully
   Degraded           False Reconcile completed successfully
   Upgradeable        True  Reconcile completed successfully

Procedure

1. In the web console, select Quick Starts from the Help menu.
2. Click on a tile in the Quick Starts catalog. For example: Creating a Red Hat Linux Enterprise Linux virtual machine.
3. Follow the instructions in the guided tour and complete the tasks for importing an operating system image and creating a virtual machine. The Virtual Machines tab displays the virtual machine.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. From the Virtual Machines tab or the Templates tab, click Create and select Virtual Machine with Wizard.
3. Select a template that is configured with a boot source.
4. Click Next to go to the Review and create step.
5. Clear the Start this virtual machine after creation checkbox if you do not want to start the virtual machine now.
6. Click Create virtual machine and exit the wizard or continue with the wizard to customize the virtual machine.

7. Click Customize virtual machine to go to the General step.

   1. Optional: Edit the Name field to specify a custom name for the virtual machine.
   2. Optional: In the Description field, add a description.

8. Click Next to go to the Networking step. A nic0 NIC is attached by default.

   1. Optional: Click Add Network Interface to create additional NICs.
   2. Optional: You can remove any or all NICs by clicking the Options menu and selecting Delete. A virtual machine does not need a NIC attached to be created. You can create NICs after the virtual machine has been created.

9. Click Next to go to the Storage step.

   1. Optional: Click Add Disk to create additional disks. These disks can be removed by clicking the Options menu and selecting Delete.
   2. Optional: Click the Options menu to edit the disk and save your changes.

10. Click Next to go to the Advanced step and choose one of the following options:

    1. If you selected a Linux template to create the VM, review the details for Cloud-init and configure SSH access.

       Note

       Statically inject an SSH key by using the custom script in cloud-init or in the wizard. This allows you to securely and remotely manage virtual machines and manage and transfer information. This step is strongly recommended to secure your VM. 

    2. If you selected a Windows template to create the VM, use the SysPrep section to upload answer files in XML format for automated Windows setup.
11. Click Next to go to the Review step and review the settings for the virtual machine.
12. Click Create Virtual Machine.

13. Click See virtual machine details to view the Overview for this virtual machine.

    The virtual machine is listed in the Virtual Machines tab.

Procedure

1. Edit the VirtualMachine manifest for your VM. For example, the following manifest configures a Red Hat Enterprise Linux (RHEL) VM:

   Example 8.1. Example manifest for a RHEL VM

   apiVersion: kubevirt.io/v1
   kind: VirtualMachine
   metadata:
     labels:
       app: <vm_name> 1
     name: <vm_name>
   spec:
     dataVolumeTemplates:
     - apiVersion: cdi.kubevirt.io/v1beta1
       kind: DataVolume
       metadata:
         name: <vm_name>
       spec:
         sourceRef:
           kind: DataSource
           name: rhel9
           namespace: openshift-virtualization-os-images
         storage:
           resources:
             requests:
               storage: 30Gi
     running: false
     template:
       metadata:
         labels:
           kubevirt.io/domain: <vm_name>
       spec:
         domain:
           cpu:
             cores: 1
             sockets: 2
             threads: 1
           devices:
             disks:
             - disk:
                 bus: virtio
               name: rootdisk
             - disk:
                 bus: virtio
               name: cloudinitdisk
             interfaces:
             - masquerade: {}
               name: default
             rng: {}
           features:
             smm:
               enabled: true
           firmware:
             bootloader:
               efi: {}
           resources:
             requests:
               memory: 8Gi
         evictionStrategy: LiveMigrate
         networks:
         - name: default
           pod: {}
         volumes:
         - dataVolume:
             name: <vm_name>
           name: rootdisk
         - cloudInitNoCloud:
             userData: |-
               #cloud-config
               user: cloud-user
               password: '<password>' 2
               chpasswd: { expire: False }
           name: cloudinitdisk

   1

   Specify the name of the virtual machine.

   2

   Specify the password for cloud-user.

2. Create a virtual machine by using the manifest file:

   $ oc create -f <vm_manifest_file>.yaml

3. Optional: Start the virtual machine:

   $ virtctl start <vm_name>

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine.
4. Click the Details tab.
5. Click the pencil icon to make a field editable.
6. Make the relevant changes and click Save.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Select a virtual machine.
3. Click the YAML tab to display the editable configuration.
4. Optional: You can click Download to download the YAML file locally in its current state.
5. Edit the file and click Save.

Procedure

1. Run the following command to update the virtual machine configuration:

   $ oc edit <object_type> <object_ID>

2. Open the object configuration.
3. Edit the YAML.

4. If you edit a running virtual machine, you need to do one of the following:

   • Restart the virtual machine.

   • Run the following command for the new configuration to take effect:

     $ oc apply <object_type> <object_ID>

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Disks tab.

5. In the Add Disk window, specify the Source, Name, Size, Type, Interface, and Storage Class.

   1. Advanced: You can enable preallocation if you use a blank disk source and require maximum write performance when creating data volumes. To do so, select the Enable preallocation checkbox.
   2. Optional: In the Advanced list, specify the Volume Mode and Access Mode for the virtual disk. If you do not specify these parameters, the system uses the default values from the kubevirt-storage-class-defaults config map.
6. Click Add.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Network Interfaces tab.
5. Click Add Network Interface.
6. In the Add Network Interface window, specify the Name, Model, Network, Type, and MAC Address of the network interface.
7. Click Add.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Disks tab.
5. Click the Options menu for the CD-ROM that you want to edit and select Edit.
6. In the Edit CD-ROM window, edit the fields: Source, Persistent Volume Claim, Name, Type, and Interface.
7. Click Save.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Details tab.
5. Click the pencil icon that is located on the right side of Boot Order. If a YAML configuration does not exist, or if this is the first time that you are creating a boot order list, the following message displays: No resource selected. VM will attempt to boot from disks by order of appearance in YAML file.
6. Click Add Source and select a bootable disk or network interface controller (NIC) for the virtual machine.
7. Add any additional disks or NICs to the boot order list.
8. Click Save.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Details tab.
5. Click the pencil icon that is located on the right side of Boot Order.

6. Choose the appropriate method to move the item in the boot order list:

   • If you do not use a screen reader, hover over the arrow icon next to the item that you want to move, drag the item up or down, and drop it in a location of your choice.
   • If you use a screen reader, press the Up Arrow key or Down Arrow key to move the item in the boot order list. Then, press the Tab key to drop the item in a location of your choice.
7. Click Save.

Procedure

1. Open the YAML configuration file for the virtual machine by running the following command:

   $ oc edit vm example

2. Edit the YAML file and modify the values for the boot order associated with a disk or network interface controller (NIC). For example:

   disks:
     - bootOrder: 1 1
       disk:
         bus: virtio
       name: containerdisk
     - disk:
         bus: virtio
       name: cloudinitdisk
     - cdrom:
         bus: virtio
       name: cd-drive-1
   interfaces:
     - boot Order: 2 2
       macAddress: '02:96:c4:00:00'
       masquerade: {}
       name: default

   1

   The boot order value specified for the disk.

   2

   The boot order value specified for the network interface controller.

3. Save the YAML file.
4. Click reload the content to apply the updated boot order values from the YAML file to the boot order list in the web console.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Details tab.
5. Click the pencil icon that is located on the right side of Boot Order.
6. Click the Remove icon next to the item. The item is removed from the boot order list and saved in the list of available boot sources. If you remove all items from the boot order list, the following message displays: No resource selected. VM will attempt to boot from disks by order of appearance in YAML file.

Procedure

1. In the OpenShift Virtualization console, click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.

3. Click the Options menu of the virtual machine that you want to delete and select Delete Virtual Machine.

   • Alternatively, click the virtual machine name to open the Virtual Machine Overview screen and click Actions → Delete Virtual Machine.
4. In the confirmation pop-up window, click Delete to permanently delete the virtual machine.

Procedure

1. Click Workloads → Virtualization from the side menu. A list of virtual machines (VMs) and standalone VMIs displays.
2. Click the name of a standalone VMI to open the Virtual Machine Instance Overview screen.
3. Click the Details tab.
4. Click the pencil icon that is located on the right side of Annotations.
5. Make the relevant changes and click Save.

Procedure

1. In the OpenShift Container Platform web console, click Workloads → Virtualization from the side menu.

2. Click the ⋮ button of the standalone virtual machine instance (VMI) that you want to delete and select Delete Virtual Machine Instance.

   • Alternatively, click the name of the standalone VMI. The Virtual Machine Instance Overview page displays.
3. Select Actions → Delete Virtual Machine Instance.
4. In the confirmation pop-up window, click Delete to permanently delete the standalone VMI.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Find the row that contains the virtual machine that you want to start.

4. Navigate to the appropriate menu for your use case:

   • To stay on this page, where you can perform actions on multiple virtual machines:

     1. Click the Options menu located at the far right end of the row.

   • To view comprehensive information about the selected virtual machine before you start it:

     1. Access the Virtual Machine Overview screen by clicking the name of the virtual machine.
     2. Click Actions.
5. Select Start Virtual Machine.
6. In the confirmation window, click Start to start the virtual machine.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Find the row that contains the virtual machine that you want to restart.

4. Navigate to the appropriate menu for your use case:

   • To stay on this page, where you can perform actions on multiple virtual machines:

     1. Click the Options menu located at the far right end of the row.

   • To view comprehensive information about the selected virtual machine before you restart it:

     1. Access the Virtual Machine Overview screen by clicking the name of the virtual machine.
     2. Click Actions.
5. Select Restart Virtual Machine.
6. In the confirmation window, click Restart to restart the virtual machine.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Find the row that contains the virtual machine that you want to stop.

4. Navigate to the appropriate menu for your use case:

   • To stay on this page, where you can perform actions on multiple virtual machines:

     1. Click the Options menu located at the far right end of the row.

   • To view comprehensive information about the selected virtual machine before you stop it:

     1. Access the Virtual Machine Overview screen by clicking the name of the virtual machine.
     2. Click Actions.
5. Select Stop Virtual Machine.
6. In the confirmation window, click Stop to stop the virtual machine.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Find the row that contains the virtual machine that you want to unpause.

4. Navigate to the appropriate menu for your use case:

   • To stay on this page, where you can perform actions on multiple virtual machines:

     1. In the Status column, click Paused.

   • To view comprehensive information about the selected virtual machine before you unpause it:

     1. Access the Virtual Machine Overview screen by clicking the name of the virtual machine.
     2. Click the pencil icon that is located on the right side of Status.
5. In the confirmation window, click Unpause to unpause the virtual machine.

1. Mark the node as unschedulable:

   $ oc adm cordon <node_name>

2. Drain all pods on the node:

   $ oc adm drain <node_name> --force=true

   This step might fail if the node is offline or unresponsive. Even if the node does not respond, it might still be running a workload that writes to shared storage. To avoid data corruption, power down the physical hardware before you proceed.

3. Delete the node from the cluster:

   $ oc delete node <node_name>

   Although the node object is now deleted from the cluster, it can still rejoin the cluster after reboot or if the kubelet service is restarted. To permanently delete the node and all its data, you must decommission the node.

4. If you powered down the physical hardware, turn it back on so that the node can rejoin the cluster.

Procedure

1. Access the virtual machine command line through one of the consoles or by SSH.

2. Install the QEMU guest agent on the virtual machine:

   $ yum install -y qemu-guest-agent

3. Ensure the service is persistent and start it:

   $ systemctl enable --now qemu-guest-agent

Procedure

1. Click Workloads → Virtual Machines from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine name to open the Virtual Machine Overview screen and view the Details pane.
4. Click Logged in users to view the Details tab that shows information for users.
5. Click the Disks tab to view information about the file systems.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Environment tab.
5. Click Select a resource and select a secret, config map, or service account from the list. A six character serial number is automatically generated for the selected resource.
6. Click Save.
7. Optional. Add another object by clicking Add Config Map, Secret or Service Account.

Verification

1. From the Virtual Machine Overview page, click the Disks tab.
2. Check to ensure that the secret, config map, or service account is included in the list of disks.

3. Optional. Choose the appropriate method to apply your changes:

   1. If the virtual machine is running, restart the virtual machine by clicking Actions → Restart Virtual Machine.
   2. If the virtual machine is stopped, start the virtual machine by clicking Actions → Start Virtual Machine.

Procedure

1. Click Workloads → Virtualization from the side menu.
2. Click the Virtual Machines tab.
3. Select a virtual machine to open the Virtual Machine Overview screen.
4. Click the Environment tab.
5. Find the item that you want to delete in the list, and click Remove on the right side of the item.
6. Click Save.

Verification

1. From the Virtual Machine Overview page, click the Disks tab.
2. Check to ensure that the secret, config map, or service account that you removed is no longer included in the list of disks.

Procedure

1. Add the container-native-virtualization/virtio-win container disk as a cdrom disk in the Windows virtual machine configuration file. The container disk will be downloaded from the registry if it is not already present in the cluster.

   spec:
     domain:
       devices:
         disks:
           - name: virtiocontainerdisk
             bootOrder: 2 1
             cdrom:
               bus: sata
   volumes:
     - containerDisk:
         image: container-native-virtualization/virtio-win
       name: virtiocontainerdisk

   1

   OpenShift Virtualization boots virtual machine disks in the order defined in the VirtualMachine configuration file. You can either define other disks for the virtual machine before the container-native-virtualization/virtio-win container disk or use the optional bootOrder parameter to ensure the virtual machine boots from the correct disk. If you specify the bootOrder for a disk, it must be specified for all disks in the configuration.

2. The disk is available once the virtual machine has started:

   • If you add the container disk to a running virtual machine, use oc apply -f <vm.yaml> in the CLI or reboot the virtual machine for the changes to take effect.
   • If the virtual machine is not running, use virtctl start <vm>.

Procedure

1. Start the virtual machine and connect to a graphical console.
2. Log in to a Windows user session.

3. Open Device Manager and expand Other devices to list any Unknown device.

   1. Open the Device Properties to identify the unknown device. Right-click the device and select Properties.
   2. Click the Details tab and select Hardware Ids in the Property list.
   3. Compare the Value for the Hardware Ids with the supported VirtIO drivers.
4. Right-click the device and select Update Driver Software.
5. Click Browse my computer for driver software and browse to the attached SATA CD drive, where the VirtIO drivers are located. The drivers are arranged hierarchically according to their driver type, operating system, and CPU architecture.
6. Click Next to install the driver.
7. Repeat this process for all the necessary VirtIO drivers.
8. After the driver installs, click Close to close the window.
9. Reboot the virtual machine to complete the driver installation.

Procedure

1. Edit the configuration file and remove the disk and the volume.

   $ oc edit vm <vm-name>

   spec:
     domain:
       devices:
         disks:
           - name: virtiocontainerdisk
             bootOrder: 2
             cdrom:
               bus: sata
   volumes:
     - containerDisk:
         image: container-native-virtualization/virtio-win
       name: virtiocontainerdisk

2. Reboot the virtual machine for the changes to take effect.

Procedure

1. Add the container-native-virtualization/virtio-win container disk as a cdrom disk in the Windows virtual machine configuration file. The container disk will be downloaded from the registry if it is not already present in the cluster.

   spec:
     domain:
       devices:
         disks:
           - name: virtiocontainerdisk
             bootOrder: 2 1
             cdrom:
               bus: sata
   volumes:
     - containerDisk:
         image: container-native-virtualization/virtio-win
       name: virtiocontainerdisk

   1

   OpenShift Virtualization boots virtual machine disks in the order defined in the VirtualMachine configuration file. You can either define other disks for the virtual machine before the container-native-virtualization/virtio-win container disk or use the optional bootOrder parameter to ensure the virtual machine boots from the correct disk. If you specify the bootOrder for a disk, it must be specified for all disks in the configuration.

2. The disk is available once the virtual machine has started:

   • If you add the container disk to a running virtual machine, use oc apply -f <vm.yaml> in the CLI or reboot the virtual machine for the changes to take effect.
   • If the virtual machine is not running, use virtctl start <vm>.

Procedure

1. Start the virtual machine and connect to a graphical console.
2. Begin the Windows installation process.
3. Select the Advanced installation.
4. The storage destination will not be recognized until the driver is loaded. Click Load driver.
5. The drivers are attached as a SATA CD drive. Click OK and browse the CD drive for the storage driver to load. The drivers are arranged hierarchically according to their driver type, operating system, and CPU architecture.
6. Repeat the previous two steps for all required drivers.
7. Complete the Windows installation.

Procedure

1. Edit the configuration file and remove the disk and the volume.

   $ oc edit vm <vm-name>

   spec:
     domain:
       devices:
         disks:
           - name: virtiocontainerdisk
             bootOrder: 2
             cdrom:
               bus: sata
   volumes:
     - containerDisk:
         image: container-native-virtualization/virtio-win
       name: virtiocontainerdisk

2. Reboot the virtual machine for the changes to take effect.