SupportConsoleDevelopersStart a trialContact

Migration Guide

Red Hat JBoss A-MQ

Migrating to Red Hat JBoss A-MQ 6.2

Red Hat

Version 6.2

Copyright © 2011-2015 Red Hat, Inc. and/or its affiliates.

15 Jun 2018

Abstract

This guide lays out the issues a user will encounter when upgrading to the latest version of Red Hat JBoss A-MQ.

Chapter 1. Migration Overview

Abstract

This chapter highlights some of the key points that might affect your applications, when migrating from JBoss A-MQ 6.1 to JBoss A-MQ 6.2.

1.1. Upgraded Components

Version upgrades

Many of the major components in JBoss Fuse and JBoss A-MQ 6.2 have been upgraded. The following versions are used in JBoss A-MQ:
Table 1.1. Component Versions
ComponentVersion for 6.1Version for 6.2
Apache ActiveMQ5.9.x5.11.0
Apache Karaf2.3.x2.4.0
Fabric8 (was Fuse Fabric)1.0.01.2.0
Spring framework3.2.x3.2.x

Apache ActiveMQ changes

The changes resulting from the upgrade to version 5.11.0 are detailed in Chapter 4, Apache ActiveMQ Issues.

1.2. New Role-Based Access Control

Overview

JBoss A-MQ 6.2 has a new role-based access control (RBAC) feature, which is enabled by default in the container. The new RBAC system offers differentiated access to the container, depending on which roles have been assigned to a user. The RBAC imposes access controls on the Karaf console (so that only administrators can access the full range of commands and command options) and imposes access controls on the JMX protocol (so that access control is applied to the Fuse Management Console).

Standardized roles

Table 1.2, “Standard Roles for Access Control” lists and describes the standard roles that are used throughout the JMX ACLs and the command console ACLs.
Table 1.2. Standard Roles for Access Control
RolesDescription
Monitor, Operator, MaintainerGrants read-only access to the container.
Deployer, AuditorGrants read-write access at the appropriate level for ordinary users, who want to deploy and run applications. But blocks access to sensitive container configuration settings.
Administrator, SuperUserGrants unrestricted access to the container.

Migrating user data for RBAC

When migrating to JBoss A-MQ 6.2, you must modify your user data, so that users are assigned one of the standard roles from Table 1.2, “Standard Roles for Access Control”.

Reference

For more details about role-based access control, see section "Role-Based Access Control" in "Security Guide".

1.3. Security Changes

Overriding the default JAAS realm in Fabric

In JBoss A-MQ 6.2, the rank of the default ZookeeperLoginModule JAAS module (which is installed by default in a Fabric container) has changed to 99, and the name of the default realm is karaf. In previous releases, the rank of ZookeeperLoginModule realm was just 1.
Hence, if you want to override the default karaf in the context of Fabric, you must define a new realm named karaf, with a rank attribute that is greater than or equal to 100.

Enabling LDAP authentication in a Fabric

In particular, this change affects the configuration needed to enable LDAP authentication in a Fabric. In this case, the rank attribute of the jaas:config element in the JAAS realm configuration file must be increased to at least 100 (recommended is 200). For details, see section "Procedure for a Fabric" in "Security Guide".

1.4. Migrating Spring-DM to Blueprint

Spring-DM is now deprecated

Spring Dynamic Modules (Spring-DM) is now deprecated and will be removed from a future release of JBoss A-MQ. You can continue to use Spring XML and the Spring framework, however, as long as you do not invoke the Spring-DM component.

Prefer Blueprint over Spring-DM

The Blueprint container is now the preferred framework for instantiating, registering, and referencing OSGi services, because this container has now been adopted as an OSGi standard. This ensures greater portability for your OSGi service definitions in the future.
Spring Dynamic Modules (Spring-DM) provided much of the original impetus for the definition of the Blueprint standard, but should now be regarded as obsolescent. Using the Blueprint container does not prevent you from using the Spring framework: the latest version of Spring is compatible with Blueprint.

How to tell whether your code uses Spring-DM

In Spring XML files, the Spring-DM component is associated with the following XML namespace: 
http://www.springframework.org/schema/osgi
To identify the parts of your application that use Spring-DM, search for the preceding namespace string in your code.

How to migrate Spring-DM to Blueprint

If you have a Spring XML file that uses the Spring-DM component, migrate this file to Blueprint XML, as follows:
  1. In the standard Maven project layout, Blueprint XML files are stored under the following directory: 
    src/main/resources/OSGI-INF/blueprint
    If it does not already exist, create this directory under your Maven project.
  2. Move the relevant Spring XML file from the Spring directory, src/main/resources/META-INF/spring, to the Blueprint directory, src/main/resources/OSGI-INF/blueprint.
  3. Edit the Spring XML file in order to convert it to a Blueprint XML file. For example, a typical Spring XML file using Spring-DM has the following outline: 
    <beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:osgi="http://www.springframework.org/schema/osgi">
    ...
    <osgi:reference id="osgiPlatformTransactionManager"
                    interface="org.springframework.transaction.PlatformTransactionManager"/>

    <osgi:reference id="osgiJtaTransactionManager"
                    interface="javax.transaction.TransactionManager"/>
    ...
</beans>
    You can convert this Spring XML file to a Blueprint XML file by replacing the beans root element by a root blueprint root element, and replacing Spring-DM osgi:reference elements by Blueprint reference elements. For example: 
    <blueprint xmlns="http://www.osgi.org/xmlns/blueprint/v1.0.0"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    ...
    <reference id="osgiPlatformTransactionManager"
               interface="org.springframework.transaction.PlatformTransactionManager"/>

    <reference id="osgiJtaTransactionManager"
               interface="javax.transaction.TransactionManager"/>
    ...
</blueprint>

1.5. Migrating Maven Projects

Overview

JBoss A-MQ 6.2 now has a JBoss A-MQ BOM (Bill of Materials), which defines the versions of all the JBoss A-MQ Maven artifacts. You can use the BOM to simplify migration of your Maven POM files. Instead of updating the version elements on each Maven dependency, all you need to do is to import the latest JBoss A-MQ BOM, which defines default versions for all of the dependencies provided by JBoss A-MQ.

JBos A-MQ BOM

The JBoss A-MQ BOM is a parent POM that defines the versions for all of the Maven artifacts provided by JBoss A-MQ. The JBoss A-MQ BOM exploits Maven's dependency management mechanism to specify default versions for the Maven artifacts, so that it is no longer necessary to specify the artifact versions explicitly in your POM.

Current version of the JBos A-MQ BOM

The easiest way to discover the current version of the JBoss A-MQ BOM is to examine one of the sample pom.xml files from the quickstarts examples. For example, in the InstallDir/quickstarts/eip/pom.xml file, you can find a line that defines the JBoss A-MQ BOM version, as follows: 
<project ...>
    ...
    <properties>
        ...
        <!-- the version of the JBoss A-MQ BOM, defining all the dependency versions -->
        <jboss.fuse.bom.version>6.2.1.redhat-084</jboss.fuse.bom.version>
    </properties>
    ...
</project>

How to migrate Maven dependencies using the JBos A-MQ BOM

To migrate Maven dependencies using the JBoss A-MQ BOM, open the Maven pom.xml file for your project and edit it as follows:
  1. Define the JBoss A-MQ BOM version as a property in your pom.xml file, using the current BOM version. For example: 
    <project ...>
    ...
    <properties>
        ...
        <jboss.fuse.bom.version>6.2.1.redhat-084</jboss.fuse.bom.version>
    </properties>
    ...
</project>
  2. Reference the JBoss A-MQ BOM parent POM in a dependencyManagement element, so that it defines default versions for the artifacts provided by JBoss A-MQ. Add the following dependencyManagement element to your pom.xml file: 
    <project ...>
    ...
    <dependencyManagement>
        <dependencies>
            <dependency>
                <groupId>org.jboss.fuse.bom</groupId>
                <artifactId>jboss-fuse-parent</artifactId>
                <version>${jboss.fuse.bom.version}</version>
                <type>pom</type>
                <scope>import</scope>
            </dependency>
        </dependencies>
    </dependencyManagement>
    ...
</project>
  3. Now delete all of the version elements in your JBoss A-MQ dependencies. All of the versions defined in the JBoss A-MQ BOM will be applied automatically to your dependencies (through the Maven dependency management mechanism). For example, if you already had some Apache Camel dependencies, as follows: 
      <dependencies>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-core</artifactId>
 <version>2.15.1.redhat-621084</version>
    </dependency>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-blueprint</artifactId>
 <version>2.15.1.redhat-621084</version>
    </dependency>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-jetty</artifactId>
 <version>2.15.1.redhat-621084</version>
    </dependency>
    ...
  </dependencies>
    You would delete the version elements, so that the dependencies are specified as follows: 
      <dependencies>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-core</artifactId>
    </dependency>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-blueprint</artifactId>
    </dependency>
    <dependency>
      <groupId>org.apache.camel</groupId>
      <artifactId>camel-jetty</artifactId>
    </dependency>
    ...
  </dependencies>
  4. In future, when you migrate to a later version of JBoss A-MQ, all that you need to do to upgrade your pom.xml file is to edit the jboss.fuse.bom.version property, so that it references the new version of the JBoss A-MQ BOM.

Chapter 2. Deprecated and Removed Features

bin/deletefabric8 script is deprecated

The bin/deletefabric8 script is deprecated and will be removed in a future release.

Spring Dynamic Modules (Spring-DM) is deprecated

Spring-DM (which integrates Spring XML with the OSGi service layer) is deprecated in 6.2 and you should use the Blueprint framework instead. Using Blueprint does not prevent you from using the Spring framework: the latest version of Spring is compatible with Blueprint.

ServiceMix Maven archetypes not supported

The ServiceMix Maven archetypes (with a groupId of org.apache.servicemix.tooling) are no longer supported and are not available in 6.2. You can use the fabric8 Maven archetypes instead (which provide similar functionality). The fabric8 archetypes have a groupId of io.fabric8.archetypes and the following fabric8 archetypes are available: 
karaf-camel-amq-archetype
karaf-camel-cbr-archetype
karaf-camel-cxf-code-first-archetype
karaf-camel-cxf-contract-first-archetype
karaf-camel-dozer-wiki-archetype
karaf-camel-drools-archetype
karaf-camel-eips-archetype
karaf-camel-errorhandler-archetype
karaf-camel-log-archetype
karaf-camel-log-wiki-archetype
karaf-camel-webservice-archetype
karaf-rest-archetype
karaf-secure-rest-archetype	
karaf-secure-soap-archetype
karaf-soap-archetype

Fuse Application Bundles

Fuse Application Bundles (FABs) are no longer supported and are not available in 6.2. Instead of using FABs, it is recommended that you repackage your code as an OSGi bundle, for deployment into the JBoss A-MQ container.

Chapter 3. Console Changes

fabric:mq-create command

The following argument names have changed in JBoss A-MQ 6.2:
  • --ports to --port
  • --networks to --network

fabric:profile-create command

The following argument names have changed in JBoss A-MQ 6.2:
  • --parents to --parent

fabric:profile-edit command

The following argument names have changed in JBoss A-MQ 6.2:
  • --repositories to --repository
  • --features to --feature
  • --libs to --lib
  • --bundles to --bundle

fabric:export and fabric:import commands

The fabric:export and fabric:import commands have been removed in JBoss A-MQ 6.2, and are now replaced by the corresponding zk:export and zk:import commands. To gain access to these Zookeeper commands, you must install the fabric-zookeeper-commands feature.
Note
The zk:export and zk:import commands interact purely with the Zookeeper registry. For example, you cannot use these commands to export or import Fabric profile data, which is now stored in the container's Git repository.

Chapter 4. Apache ActiveMQ Issues

Abstract

JBoss A-MQ 6.2 uses Apache ActiveMQ 5.11.0. Since the last release, Apache ActiveMQ has been upgraded from version 5.9.0 to version 5.11.0. This introduces a few migration issues.

4.1. Key Migration Issues

JMS ObjectMessage serialization

If you are migrating an application that uses JMS ObjectMessage serialization (that is, sending or receiving messages containing a serialized Java object using the javax.jms.ObjectMessage type), in JBoss A-MQ 6.2.1 you must now set the org.apache.activemq.SERIALIZABLE_PACKAGES JVM property. The org.apache.activemq.SERIALIZABLE_PACKAGES property must be set to the list of Java packages that are allowed to be serialized.
For example, on the broker side, you can set this property in the InstallDir/etc/system.properties file, as follows: 
org.apache.activemq.SERIALIZABLE_PACKAGES="java.lang,java.util,org.apache.activemq,org.fusesource.hawtbuf,com.thoughtworks.xstream.mapper,com.mycompany.myapp"
If you do not set this JVM property, you are liable to see an error message like the following after migrating your application to JBoss A-MQ 6.2.1: 
Caused by: javax.jms.JMSException: Failed to build body from content. Serializable class not available to broker. Reason: java.lang.ClassNotFoundException: Forbidden class com.sundar.verify.MyBean! This class is not allowed to be serialized. Add package with 'org.apache.activemq.SERIALIZABLE_PACKAGES' system property.
Important
JMS ObjectMessage serialization poses significant security risks. If you use this feature, make sure that you understand the risks—see Security in Object Serialization.

4.2. Migrating Clients

Migrating Apache ActiveMQ clients

In general, it is recommended that you update your Apache ActiveMQ clients at the same time that you update the brokers, in order to guarantee compatibility between clients and brokers.
It is possible, in some cases, that older client versions might be interoperable with later broker versions. The Openwire protocol supports version negotiation, such that an old client can negotiate the lowest common version with its peer and use that version. But JBoss A-MQ does not have a comprehensive test suite for testing compatibility between all of the different versions of Apache ActiveMQ. Hence, to be sure of compatibility, it is recommended that you upgrade your clients along with your brokers to use the same version.

4.3. New Features

ActiveMQ 5.10.0

In ActiveMQ 5.10.0, the following new features have been introduced:
  • Hardened MQTT support
  • Hardened AMQP support
  • Hardened LevelDB store
  • Improved RAR/JCA adapter
  • Improved Runtime configuration plugin

ActiveMQ 5.11.0

In ActiveMQ 5.11.0, the following new features have been introduced:
  • Destination import/export for lock down mode. Use the destinationsPlugin on the broker to import/export broker destinations to s a specified location. For example: 
    <plugins>
    <destinationsPlugin location="/workspace/destinations"/>
</plugins>
  • Dynamic Camel root loading. Allows routes to modified on the fly without restarting the broker. To take advantage of this feature, you must define a camelroutesBrokerPlugin plug-in in the broker configuration, as follows: 
    <plugins>
    <camelroutesBrokerPlugin routesFile="routes.xml" />
</plugins>
    Where the routes.xml file must be in the same location as the broker configuration file.
  • MQTT: QOS2 mapped to virtual topics. Can be enabled using the transport option, ?transport.subscriptionStrategy="mqtt-virtual-topic-subscriptions".
  • Start scripts simplification
  • Recover scheduler database option

4.4. Dependency Upgrades

Spring framework

JBoss A-MQ and JBoss Fuse use Spring framework version 3.2.

Apache Karaf

JBoss A-MQ and JBoss Fuse use Apache Karaf version 2.4.0.

4.5. API Changes

JMS streams

JMS streams are now deprecated. If you need to send very large messages, it is recommended that you use an out-of-bounds transport, such as FTP, instead. In particular, the org.apache.activemq.ActiveMQInputStreamand ActiveMQOutputStream classes are deprecated, as are the ActiveMQConnection.createInputStream and ActiveMQConnection.createOutputStream methods.

Camel ActiveMQ component

Removed the org.apache.activemq.camel.converter.IdentityMessageReuseConverter class from the Camel ActiveMQ component (activemq-camel).

Chapter 5. Migrating JBoss A-MQ from 6.2.0 to 6.2.1 on Karaf

Abstract

If you have already deployed an instance of JBoss A-MQ 6.2.0 Apache Karaf container, you can upgrade your 6.2.0 installation to version 6.2.1 using the new patching mechanism. The procedure for migrating a standalone container is different from the procedure for migrating a collection of Fabric containers. Follow the appropriate set of instructions for your system.

5.1. Patching a Standalone Karaf Container from 6.2.0 to 6.2.1

Overview

The instructions in this section are for upgrading an existing JBoss A-MQ 6.2.0 Apache Karaf installation, which is deployed as a standalone container (in other words, not using Fabric), to version 6.2.1.

New patching mechanism

Upgrading from JBoss A-MQ 6.2.0 to 6.2.1 requires the new patching mechanism, which is implemented for the first time in 6.2.1. This presents a bootstrapping problem: the existing 6.2.0 installation must be enhanced to support the new patching mechanism before you can install patch version 6.2.1. The upgrade procedure therefore consists of two distinct phases, as follows:
  1. Install the patch management enablement pack for 6.2.0, which replaces the existing patch mechanism with the new patching mechanism. In all other respects, the container remains at version 6.2.0.
  2. Install the 6.2.1 patch in the standalone container using the new patch mechanism. After this step, the container is upgraded fully to version 6.2.1.

Initial system

The starting point for this patching procedures is assumed to be an installation of Red Hat JBoss A-MQ 6.2.0 (jboss-a-mq-6.2.0.redhat-133.zip). This can be a container instance that you have customized in various ways, by adding application bundles and features, or even by editing configuration files under the etc/ directory.
Note
The new patching process is usually non-destructive, preserving any customizations made before the patch was applied. If a merge conflict cannot be resolved automatically, however, warning messages will be generated in the log file.

Download the required packages

To patch JBoss A-MQ from 6.2.0 to 6.2.1 you require the following packages:
patch-management-for-amq-620-6.2.1.redhat-084.zip
Available as the download file, Red Hat JBoss A-MQ 6.2.1 on Karaf Update Installer.
jboss-a-mq-6.2.1.redhat-084.zip
Available as the download file, Red Hat JBoss A-MQ 6.2.1.

Applying the 6.2.1 patch to a standalone container

To upgrade a JBoss A-MQ 6.2.0 standalone container to version 6.2.1, proceed as follows:
  1. Make a full backup of your JBoss A-MQ 6.2.0 installation before attempting to apply the patch. In particular, if you made any custom changes to the etc/org.ops4j.pax.logging.cfg file, make sure that you back it up. The patch process for 6.2.1 will over-write this file and you will need to re-apply your changes to it.
  2. Install the patch management enablement pack for 6.2.0, patch-management-for-amq-620-6.2.1.redhat-084.zip, on top of your 6.2.0 installation. Use an archive utility to extract the contents on top of the existing 6.2.0 installation.
    The patch management enablement pack contains the following files: 
    patches/jboss-a-mq-6.2.0.redhat-133-baseline.zip
system/io/fabric8/patch/patch-commands/1.2.0.redhat-621084/patch-commands-1.2.0.redhat-621084.jar
system/io/fabric8/patch/patch-core/1.2.0.redhat-621084/patch-core-1.2.0.redhat-621084.jar
system/io/fabric8/patch/patch-features/1.2.0.redhat-621084/patch-features-1.2.0.redhat-621084-features.xml
system/io/fabric8/patch/patch-management/1.2.0.redhat-621084/patch-management-1.2.0.redhat-621084.jar
    Note
    It does not matter whether the container is running or not when you extract these files.
  3. Start the container, if it is not already running.
  4. Enable the new patch management commands in the old 6.2.0 container, by entering the following console commands: 
    features:uninstall patch
features:removeurl mvn:io.fabric8.patch/patch-features/1.2.0.redhat-133/xml/features
features:addurl mvn:io.fabric8.patch/patch-features/1.2.0.redhat-621084/xml/features 
features:install patch
    The effect of this is to replace the old patch commands by the new patch commands in the existing 6.2.0 container, thereby bootstrapping the new patch mechanism (which is needed to install the 6.2.1 patch).
  5. Before proceeding to the next phase, verify that the new patch commands have been successfully installed. Enter the following command: 
    JBossFuse:karaf@root> list -s -t 0 | grep -i patch
[ 265] [Active     ] [            ] [       ] [    2] io.fabric8.patch.patch-management (1.2.0.redhat-621084)
[ 266] [Active     ] [            ] [       ] [   80] io.fabric8.patch.patch-core (1.2.0.redhat-621084)
[ 267] [Active     ] [            ] [       ] [   80] io.fabric8.patch.patch-commands (1.2.0.redhat-621084)
    Check that the preceding bundles and only these bundles are output by this command.
  6. Add the 6.2.1 patch to the container's environment using the patch:add command (remembering to customize the path to the patch file), as follows: 
    JBossA-MQ:karaf@root> patch:add file:///path/to/jboss-a-mq-6.2.1.redhat-084.zip
[name]                      [installed] [description]              
jboss-a-mq-6.2.1.redhat-084 false       jboss-a-mq-6.2.1.redhat-084
    Note
    In this case, the patch file is the full distribution of JBoss A-MQ 6.2.1. Under the new patching mechanism, the full distribution file has a dual purpose: you can extract the archive directly to create a fresh 6.2.1 distribution; or you can add the file as a patch to migrate an existing 6.2.0 installation to 6.2.1.
  7. Simulate installing the patch using the patch:simulate command.
    This will generate a log of the changes that will be made to the container when the patch is installed, but will not make any actual changes to the container. Review the simulation log to understand the changes that will be made to the container.
  8. Apply the patch to the container using the patch:install command: 
    patch:install jboss-a-mq-6.2.1.redhat-084
    Note
    Make sure that the container has fully started before you run patch:install.
  9. After installing the patch, the container shuts down automatically. At this point, the data/cache directory is empty, but it will be repopulated when the container starts up again.
    Note
    (Windows O/S only) At this point, it is likely that the bin\fuse.bat script (which calls the bin\karaf.bat script) will output an error as it exits. This error can be safely ignored. This happens because, on Windows, the bin\karaf.bat script continues to execute even after it has been overwritten by the patch:install command (whereas on Linux or UNIX, the corresponding script process exits immediately).
  10. Open the bin/setenv file (bin\setenv.bat on Windows O/S) in a text editor and check the value of the JAVA_MAX_MEM environment variable, which must be set to at least 1024M. Increase the setting, if necessary.
    Note
    The JBoss A-MQ 6.2.1 rollup patch tries to update the JAVA_MAX_MEM setting to the correct value. But if you have already customized the setenv file yourself, the patching mechanism preserves your custom settings. This could result in the JAVA_MAX_MEM environment variable having a value that is too low.
  11. The JBoss A-MQ 6.2.1 rollup patch over-writes the contents of the etc/org.ops4j.pax.logging.cfg configuration file (in order fix a security issue). If you previously made any customizations to this file, they will be over-written. If this is the case, edit the file to re-apply your changes.
  12. Restart the container manually, as follows: 
    ./bin/amq
    As the container starts up again, the patching mechanism repopulates the container with all of the requisite bundles and features for the patched standalone container. When the Welcome banner appears, it displays the new patch version: 
          _ ____                                __  __  ____
     | |  _ \                    /\        |  \/  |/ __ \
     | | |_) | ___  ___ ___     /  \ ______| \  / | |  | |
 _   | |  _ < / _ \/ __/ __|   / /\ \______| |\/| | |  | |
| |__| | |_) | (_) \__ \__ \  / ____ \     | |  | | |__| |
 \____/|____/ \___/|___/___/ /_/    \_\    |_|  |_|\___\_\

  JBoss A-MQ (6.2.1.redhat-084)
  http://www.redhat.com/products/jbossenterprisemiddleware/amq/

Hit '<tab>' for a list of available commands
and '[cmd] --help' for help on a specific command.

Open a browser to http://localhost:8181 to access the management console

Hit '<ctrl-d>' or 'osgi:shutdown' to shutdown JBoss A-MQ.
    Tip
    If you were invoking the scripts from within the InstallDir/bin directory, you might find that the bin/ directory appears to be empty after the container shuts down. This is because the contents of this directory were re-written by the patch. To see the scripts again, simply re-enter the bin/ directory, for example: cd ..;cd bin.

5.2. Patching a Fabric from 6.2.0 to 6.2.1

Overview

The instructions in this section are for upgrading an existing JBoss A-MQ 6.2.0 Fabric installation to version 6.2.1.
Warning
Rolling back the patch level from version 6.2.1 to 6.2.0 is not supported in JBoss A-MQ Fabric. This is a special case, because the version 6.2.0 Fabric agent does not support the new patching mechanism.

Prerequisite for patching Fabric in JBoss A-MQ

The following artifact—which is required in order to patch a Fabric with the new patching mechanism—is missing from the jboss-a-mq-6.2.1.redhat-084.zip distribution: 
system/io/fabric8/fabric8-karaf/1.2.0.redhat-621084/fabric8-karaf-1.2.0.redhat-621084.zip
Consequently, even after adding the JBoss A-MQ 6.2.1 rollup patch to your existing 6.2.0 container, this file will be missing from your 6.2.0 container installation.
This file is required in order to patch a JBoss A-MQ Fabric system. The missing file will be provided in the first patch for JBoss A-MQ. In the meantime, if you have access to the Red Hat JBoss Fuse 6.2.1 on Karaf Update Installer distribution (jboss-fuse-full-6.2.1.redhat-084.zip), you can copy the missing file from that distribution into the location given above. Otherwise, please contact support.

New patching mechanism

Upgrading from JBoss A-MQ 6.2.0 to 6.2.1 requires the new patching mechanism, which is implemented for the first time in 6.2.1. This presents a bootstrapping problem: the existing 6.2.0 installation must be enhanced to support the new patching mechanism before you can install patch version 6.2.1. The upgrade procedure therefore consists of the following distinct phases:
  1. Install the patch management enablement pack for 6.2.0, which replaces the existing patch mechanism with the new patching mechanism. In all other respects, the container remains at version 6.2.0.
  2. Install the 6.2.1 patch in the container using the new patch mechanism and create a new profile version to store the 6.2.1 patched profiles.
  3. Upgrade each of the containers in the fabric to the patched version.

Upgrading different container types

A typical fabric consists of a variety of different container types. When migrating the fabric from 6.2.0 to 6.2.1, the different container types have to be handled in slightly different ways, as follows:
Root container
The root container is the container where you initially install the patch. The root container plays a key role in the patch process—for example, by acting as a source of patch files for the other containers in the fabric. For this reason, it is recommended that you upgrade this container last of all.
SSH container
There are some special steps required to prepare SSH containers for patching. See the section called “Preparing for a Fabric SSH container upgrade”.
Child container
Because child containers share some files and configuration with their parent container, they can easily get into an inconsistent state during the patching process. The simplest way to deal with child containers is to shut them down and focus on upgrading the parent container initially. After the parent container has been successfully upgraded, you can turn your attention to the child containers.
Note
Child containers cannot be kept at a lower patch version than the root container. They must be upgraded to at least the same patch version as the parent container.

Establishing a baseline for an SSH container upgrade

The new patching mechanism keeps track of all the changes that are made as successive patches are installed (in order to be able to roll back the patches, if needed). Hence, the first step performed by the patching mechanism is to scan the existing container installation to discover its initial state (establishing a baseline for subsequent changes introduced by patches). In particular, the patch mechanism scans certain subdirectories of the system/ directory, to discover the initial set of bundles and Maven artifacts available in the installation.
In the case of the JBoss A-MQ 6.2.0 distribution (which has not been optimised to work with the new patching mechanism), a problem arises because the core Fabric distribution, fabric8-karaf-1.2.0.redhat-133.zip, is initially not included with the 6.2.0 distribution and is not present in system/. When Fabric requires a copy of this file (for example, for creating a remote SSH container), it has two alternative ways of obtaining it:
  • By downloading the missing core Fabric artifact, fabric8-karaf-1.2.0.redhat-133.zip, from a remote Maven repository.
  • By assembling the fabric8-karaf-1.2.0.redhat-133.zip file on the fly from the contents of the root container.
The differences between these two Fabric archives are minor (for example, different branding in the welcome banner) and both are supported for use in a fabric. If it has already been created or downloaded, the Fabric distribution Zip file will be stored in the following location under system/: 
system/io/fabric8/fabric8-karaf/1.2.0.redhat-133/fabric8-karaf-1.2.0.redhat-133.zip
For establishing an initial baseline, what counts are the bundles installed in the system/ directory of the root installation (the container you are using to install patches across the fabric). It can happen, however, that an SSH container uses a different version of fabric8-karaf-1.2.0.redhat-133.zip from the one that is installed in the root container. If the Fabric distribution installed in root and the Fabric distribution installed in the SSH container are different, it is impossible to establish a proper baseline for the SSH container and patching of the SSH container will fail.
The patching mechanism has been specially modified to enable a workaround for this problem. Specifically for the fabric8-karaf-1.2.0.redhat-133.zip Maven artifact (and only for this artifact), it is possible to install two different artifact versions under the system/ directory, with the following names: 
system/io/fabric8/fabric8-karaf/1.2.0.redhat-133/fabric8-karaf-1.2.0.redhat-133.zip
system/io/fabric8/fabric8-karaf/1.2.0.redhat-133/fabric8-karaf-1.2.0.redhat-133-custom.zip
Where one of the file names ends in .zip and the other ends in -custom.zip. It does not matter which file is which. When both of the alternative Fabric distribution files are stored in this way, it becomes possible for the patching mechanism to establish a baseline for either of the Fabric distributions and patching of SSH containers will now work.

Initial system

The starting point for this patching procedures is assumed to be an installation of Red Hat JBoss A-MQ 6.2.0 (jboss-a-mq-6.2.0.redhat-133.zip), which is already configured as part of a Fabric (see ).
This can be a container instance that you have customized in various ways, by adding application bundles and features, or even by editing configuration files under the etc/ directory.
Note
The new patching process is usually non-destructive, preserving any customizations made before the patch was applied. If a merge conflict cannot be resolved automatically, however, warning messages will be generated in the log file.

Download the required packages

To patch JBoss A-MQ from 6.2.0 to 6.2.1 you require the following packages:
patch-management-for-amq-620-6.2.1.redhat-084.zip
Available as the download file, Red Hat JBoss A-MQ 6.2.1 on Karaf Update Installer.
jboss-a-mq-6.2.1.redhat-084.zip
Available as the download file, Red Hat JBoss A-MQ 6.2.1.

Preparing for a Fabric SSH container upgrade

(SSH containers only) Before performing any of the steps to apply the 6.2.1 patch to Fabric, prepare for SSH container upgrades by performing the following steps (for a detailed explanation of why this is necessary, see the section called “Establishing a baseline for an SSH container upgrade”):
  1. In the installation of your root container, look for the following file under the system/ directory: 
    system/io/fabric8/fabric8-karaf/1.2.0.redhat-133/fabric8-karaf-1.2.0.redhat-133.zip
    Use a file system command to get the exact size of this file in bytes (which provides a simple way of identifying this file).
    Note
    It is possible that there is no fabric8-karaf-1.2.0.redhat-133.zip file located under this directory, which would suggest that you have not used the root container to create any SSH containers.
  2. Look for the fabric8-karaf-1.2.0.redhat-133.zip that is installed with your SSH container (or SSH containers). Use a file system command to get the exact size of this file in bytes. Repeat this for every SSH container instance in your fabric.
  3. Compare the file sizes obtained from the SSH containers with the file size obtained from the root container. If all of the file sizes are the same, this indicates that all of the containers in the Fabric are using exactly the same Fabric distribution—proceed straight to the section called “Applying the 6.2.1 patch to a Fabric container”.
    If any of the file sizes obtained from the SSH containers differ from the file size obtained from the root container, this indicates that at least one of the SSH containers is using a Fabric distribution that is different from the root container's Fabric distribution—proceed to the next step.
  4. Take one of the fabric8-karaf-1.2.0.redhat-133.zip files that is different from the fabric8-karaf-1.2.0.redhat-133.zip file already stored under the root container's system/ directory (where the difference is indicated by having a different file size), rename it to fabric8-karaf-1.2.0.redhat-133-custom.zip, and copy it to the following location under the root container's system/ directory: 
    system/io/fabric8/fabric8-karaf/1.2.0.redhat-133/fabric8-karaf-1.2.0.redhat-133-custom.zip
    When you are finished, there should be two files located under this directory, as follows: 
    system/io/fabric8/fabric8-karaf/1.2.0.redhat-133/fabric8-karaf-1.2.0.redhat-133.zip
system/io/fabric8/fabric8-karaf/1.2.0.redhat-133/fabric8-karaf-1.2.0.redhat-133-custom.zip

Applying the 6.2.1 patch to a Fabric container

To upgrade a JBoss A-MQ 6.2.0 Fabric container to version 6.2.1, proceed as follows:
  1. Make a full backup of your JBoss A-MQ 6.2.0 installation before attempting to apply the patch.
  2. Install the patch management enablement pack for 6.2.0, patch-management-for-amq-620-6.2.1.redhat-084.zip, on top of your 6.2.0 installation. Use an archive utility to extract the contents on top of the existing 6.2.0 installation.
    The patch management enablement pack contains the following files: 
    patches/jboss-a-mq-6.2.0.redhat-133-baseline.zip
system/io/fabric8/patch/patch-commands/1.2.0.redhat-621084/patch-commands-1.2.0.redhat-621084.jar
system/io/fabric8/patch/patch-core/1.2.0.redhat-621084/patch-core-1.2.0.redhat-621084.jar
system/io/fabric8/patch/patch-features/1.2.0.redhat-621084/patch-features-1.2.0.redhat-621084-features.xml
system/io/fabric8/patch/patch-management/1.2.0.redhat-621084/patch-management-1.2.0.redhat-621084.jar
    Note
    It does not matter whether the container is running or not when you extract these files.
  3. Start the container, if it is not already running.
  4. Shut down all of the child containers in the fabric using the container-stop command: 
    fabric:container-stop ChildContainerList
  5. Create a new version for the updated patch mechanism, using the fabric:version-create command: 
    JBossFuse:karaf@root> fabric:version-create 1.0.1
Created version: 1.0.1 as copy of: 1.0
    Important
    The version name must be a pure numeric string, such as 1.0.1, 1.1, 2.1, or 2.2. You cannot incorporate alphabetic characters in the version name (such as 1.0.patch).
  6. Add the new patch feature repository to version 1.0.1 of the default profile, as follows: 
    fabric:profile-edit --repository mvn:io.fabric8.patch/patch-features/1.2.0.redhat-621084/xml/features default 1.0.1
  7. Add the patch and patch-core features to version 1.0.1 of the default profile, as follows: 
    fabric:profile-edit --feature patch --feature patch-core default 1.0.1
  8. Upgrade the root container to version 1.0.1, as follows: 
    fabric:container-upgrade 1.0.1 root
    The effect of this upgrade is to replace the old patch commands by the new patch commands in the current 6.2.0 Fabric container, thereby bootstrapping the new patch mechanism (which is needed to install the 6.2.1 patch).
  9. Wait until the current container is successfully re-provisioned to version 1.0.1 before proceeding to the next phase of the patch installation. You can monitor the provision status of the current container by entering the following console command: 
    watch container-list
    When the [provision status] changes to success, you can proceed with the next step.
  10. Add the 6.2.1 patch to the container's environment using the patch:add command (remembering to customize the path to the patch file), as follows: 
    JBossA-MQ:karaf@root> patch:add file:///path/to/jboss-a-mq-6.2.1.redhat-084.zip
[name]                      [installed] [description]              
jboss-a-mq-6.2.1.redhat-084 false       jboss-a-mq-6.2.1.redhat-084
    Note
    In this case, the patch file is the full distribution of JBoss A-MQ 6.2.1. Under the new patching mechanism, the full distribution file has a dual purpose: you can extract the archive directly, to create a fresh 6.2.1 distribution; or you can add the file as a patch, in order to migrate an existing 6.2.0 installation to 6.2.1.
  11. Create a new version, using the fabric:version-create command: 
    JBossFuse:karaf@root> fabric:version-create 1.1
Created version: 1.1 as copy of: 1.0.1
  12. Apply the patch to the new version, 1.1, using the patch:fabric-install command. Note that in order to run this command you must provide the credentials, Username and Password, of a user with Administrator privileges. For example: 
    patch:fabric-install --username Username --password Password --upload --version 1.1 jboss-a-mq-6.2.1.redhat-084
  13. Synchronize the patch information across the fabric, to ensure that the profile changes in version 1.1 are propagated to all containers in the fabric (particularly remote SSH containers). Enter the following console command: 
    patch:fabric-synchronize
  14. Upgrade each existing container in the fabric using the fabric:container-upgrade command (but leaving the root container, where you installed the patch, until last) along with its respective child containers. For example, to upgrade a container named remote and its child, childOfRemote, enter the following command: 
    fabric:container-upgrade 1.1 remote childOfRemote
    Important
    It is recommended that you initially upgrade only one or two containers to the patched profile version, to ensure that the patch does not introduce any new issues.
    Note
    If the upgraded remote container gives the following error: 
    Provision error:
io.fabric8.common.util.MultiException: Error restarting bundles        at
...
Caused by: org.eclipse.jgit.api.errors.JGitInternalException: Invalid ref name: baseline-ssh-fabric8-1.2.0.redhat-133
...
    This implies that you omitted to follow the steps required to prepare for upgrading an SSH container—see the section called “Preparing for a Fabric SSH container upgrade”.
  15. Keep checking the provision status of the container you are upgrading until the status appears as requires full restart. Enter the fabric:container-list command to check the status, as follows: 
    fabric:container-list
    Note
    After the target container has been upgraded to the patch version, the target container requires a full restart. The restart cannot be performed automatically by the patching mechanism, because the auto-restart capability of the patching mechanism will not become available until after the restart.
    Important
    Do not attempt to restart the container you are upgrading until the status appears as requires full restart.
  16. Use one of the standard mechanisms to stop and restart the container manually. In some cases, it will be possible to do this using Fabric commands from the console of the root container.
    For example, you could stop the remote container as follows: 
    fabric:container-stop remote
    And restart the remote container as follows: 
    fabric:container-start remote
  17. Wait until the provision status of the container you are upgrading appears as success and then start up its child containers (if any). For example, to restart the childOfRemote container: 
    fabric:container-start childOfRemote
  18. Upgrade the root container last (that is, the container that you originally installed the patch on) and its children (if any). For example, to upgrade the root container, root, and its child, childOfRoot, enter the following command: 
    fabric:container-upgrade 1.1 root childOfRoot
  19. Keep checking the provision status of the root container until the status appears as requires full restart. Enter the fabric:container-list command to check the status, as follows: 
    fabric:container-list
    Important
    Do not attempt to restart the root container until the status appears as requires full restart.
  20. The root container must also be restarted manually. Shut it down using the shutdown console command, as follows: 
    JBossFuse:karaf@root> shutdown
Confirm: shutdown instance root (yes/no): yes
    Restart the container manually, as follows: 
    ./bin/amq
    Tip
    If you were invoking the scripts from within the InstallDir/bin directory, you might find that the bin/ directory appears to be empty after the container shuts down. This is because the contents of this directory were re-written by the patch. To see the scripts again, simply re-enter the bin/ directory, for example: cd ..;cd bin.
  21. Wait until the provision status of the root container appears as success and then start up its child containers (if any). For example, to restart the childOfRoot container: 
    fabric:container-start childOfRoot
  22. Now set the default profile version to 1.1 (the version that has the 6.2.1 patch applied): 
    fabric:version-set-default 1.1
    This ensures that when you create new containers from now on, those containers will use the version 1.1 profiles by default (otherwise you would have to specify version 1.1 explicitly in the container create command).
  23. The JBoss A-MQ 6.2.1 rollup patch over-writes the properties from the org.ops4j.pax.logging persistent ID (PID) in the karaf profile (in order to fix a security issue). If you previously made any customizations to this logging PID, they will be over-written. If this is the case, edit the karaf profile to re-apply your changes—for example, by invoking the built-in profile text editor in the Karaf console, as follows: 
    profile-edit --pid org.ops4j.pax.logging karaf 1.1

Rolling back the 6.2.1 patch in a Fabric container

It is not possible to roll back the 6.2.1 patch in a Fabric container. Specifically, if you applied the 6.2.1 patch as described here, then rolling back from profile version 1.1 to version 1.0.1 (using the fabric:container-rollback command) is guaranteed to fail; and rolling back from profile version 1.1 to version 1.0 is also guaranteed to fail.
Warning
Rolling back the patch level from version 6.2.1 to 6.2.0 is not supported in JBoss A-MQ Fabric. This is a special case, because the version 6.2.0 Fabric agent does not support the new patching mechanism.

Chapter 6. Migrate Data Store

Overview

JBoss A-MQ on Apache Karaf uses a KahaDB data store. There is an automatic migration facility that enables the KahaDB data store to be migrated to the new JBoss A-MQ version.
The Aries transaction module must be installed and enabled before it can be used. See Fuse Transaction Guide for more details. Ignore the Aries transaction files instructions below if you do not have Aries installed.

Migrate the KahaDB Data Store

Note
When migrating or patching JBoss A-MQ, always back up the KahaDB files and Aries transaction files.
  1. Backup the KhahaDB files and Aries transaction files from the old container. The files can be found at:
    • KahaDB files - InstallDir/data/amq/kahadb/*.*
    • Aries transaction files - InstallDir/data/txlog/*.*
  2. Manually copy all of the KahaDB files from the old container to the same location in the new container.
  3. Manually copy all Aries transaction log files from the same location in the sold container to the new container.
Auto-migration will take place when the new container is started.

Legal Notice

Trademark Disclaimer

The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, MetaMatrix, Fedora, the Infinity Logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Apache, ServiceMix, Camel, CXF, and ActiveMQ are trademarks of Apache Software Foundation. Any other names contained herein may be trademarks of their respective owners.
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.