Chapter 4. Creating a standalone broker

Procedure

1. Create a directory for the broker instance.

   If you are using…​	Do this…​
   Red Hat Enterprise Linux	Create a new directory to serve as the location for the broker instance. $ sudo mkdir /var/opt/amq-broker Assign the user that you created during installation. $ sudo chown -R amq-broker:amq-broker /var/opt/amq-broker
   Windows	Use Windows Explorer to create a new folder to serve as the location for the broker instance.

2. Use the artemis create command to create the broker.

   If you are using…​	Do this…​
   Red Hat Enterprise Linux	Switch to the user account you created during installation. $ su - amq-broker Change to the directory you just created for the broker instance. $ cd /var/opt/amq-broker From the broker instance’s directory, create the broker instance. $ <install_dir>/bin/artemis create mybroker
   Windows	Open a command prompt from the directory you just created for the broker instance. From the broker instance’s directory, create the broker instance. > <install_dir>\bin\artemis.cmd create mybroker

3. Follow the artemis create prompts to configure the broker instance.

   Example 4.1. Configuring a broker instance using artemis create

   $ /opt/redhat/amq-broker/bin/artemis create mybroker
   
   Creating ActiveMQ Artemis instance at: /var/opt/amq-broker/mybroker
   
   --user: is mandatory with this configuration:
   Please provide the default username:
   admin
   
   --password: is mandatory with this configuration:
   Please provide the default password:
   
   --role: is mandatory with this configuration:
   Please provide the default role:
   amq
   
   --allow-anonymous | --require-login: is mandatory with this configuration:
   Allow anonymous access? (Y/N):
   Y
   
   Auto tuning journal ...
   done! Your system can make 19.23 writes per millisecond, your journal-buffer-timeout will be 52000
   
   You can now start the broker by executing:
   
   "/var/opt/amq-broker/mybroker/bin/artemis" run
   
   Or you can run the broker in the background using:
   
   "/var/opt/amq-broker/mybroker/bin/artemis-service" start

Procedure

1. Switch to the user account you created during installation.

   $ su - amq-broker

2. Use the artemis run command to start the broker instance.

   $ /var/opt/amq-broker/mybroker/bin/artemis run
   
             __  __  ____    ____            _
       /\   |  \/  |/ __ \  |  _ \          | |
      /  \  | \  / | |  | | | |_) |_ __ ___ | | _____ _ __
     / /\ \ | |\/| | |  | | |  _ <| '__/ _ \| |/ / _ \ '__|
    / ____ \| |  | | |__| | | |_) | | | (_) |   <  __/ |
   /_/    \_\_|  |_|\___\_\ |____/|_|  \___/|_|\_\___|_|
   
   Red Hat JBoss AMQ 7.2.1.GA
   
   10:53:43,959 INFO  [org.apache.activemq.artemis.integration.bootstrap] AMQ101000: Starting ActiveMQ Artemis Server
   10:53:44,076 INFO  [org.apache.activemq.artemis.core.server] AMQ221000: live Message Broker is starting with configuration Broker Configuration (clustered=false,journalDirectory=./data/journal,bindingsDirectory=./data/bindings,largeMessagesDirectory=./data/large-messages,pagingDirectory=./data/paging)
   10:53:44,099 INFO  [org.apache.activemq.artemis.core.server] AMQ221012: Using AIO Journal
   ...

   The broker starts and displays log output with the following information:

   • The location of the transaction logs and cluster configuration.
   • The type of journal being used for message persistence (AIO in this case).

   • The URI(s) that can accept client connections.

     By default, port 61616 can accept connections from any of the supported protocols (CORE, MQTT, AMQP, STOMP, HORNETQ, and OPENWIRE). There are separate, individual ports for each protocol as well.

   • The web console is available at http://localhost:8161.
   • The Jolokia service (JMX over REST) is available at http://localhost:8161/jolokia.

Procedure

1. Use the artemis producer command to produce a few test messages and send them to the broker.

   This command sends 100 messages to the helloworld address, which is created automatically on the broker. The producer connects to the broker by using the default port 61616, which accepts all supported messaging protocols.

   $ /opt/redhat/amq-broker/amq-broker-7.2.0/bin/artemis producer --destination helloworld --message-count 100 --url tcp://localhost:61616
   Producer ActiveMQQueue[helloworld], thread=0 Started to calculate elapsed time ...
   
   Producer ActiveMQQueue[helloworld], thread=0 Produced: 100 messages
   Producer ActiveMQQueue[helloworld], thread=0 Elapsed time in second : 1 s
   Producer ActiveMQQueue[helloworld], thread=0 Elapsed time in milli second : 1289 milli seconds

2. Use the web console to see the messages stored in the broker.

   1. In a web browser, navigate to http://localhost:8161.

   2. Log into the console using the default username and default password that you created when you created the broker instance.

      The Attributes tab is displayed.

   3. On the Attributes tab, navigate to addresses helloworld queues "anycast" helloworld.

      In the previous step, you sent messages to the helloworld address. This created a new anycast helloworld address with a queue (also named helloworld). The Message count attribute shows that all 100 messages that were sent to helloworld are currently stored in this queue.

      Figure 4.1. Message count

      

3. Use the artemis consumer command to consume 50 of the messages stored on the broker.

   This command consumes 50 of the messages that you sent to the broker previously.

   $ /opt/redhat/amq-broker/amq-broker-7.2.0/bin/artemis consumer --destination helloworld --message-count 50 --url tcp://localhost:61616
   
   Consumer:: filter = null
   Consumer ActiveMQQueue[helloworld], thread=0 wait until 50 messages are consumed
   Consumer ActiveMQQueue[helloworld], thread=0 Consumed: 50 messages
   Consumer ActiveMQQueue[helloworld], thread=0 Consumer thread finished

4. In the web console, verify that the Message count is now 50.

   50 of the messages were consumed, which leaves 50 messages stored in the helloworld queue.

5. Stop the broker and verify that the 50 remaining messages are still stored in the helloworld queue.

   1. In the terminal in which the broker is running, press Ctrl+C to stop the broker.

   2. Restart the broker.

      $ /var/opt/amq-broker/mybroker/bin/artemis run

   3. In the web console, navigate back to the helloworld queue and verify that there are still 50 messages stored in the queue.

6. Consume the remaining 50 messages.

   $ /opt/redhat/amq-broker/amq-broker-7.2.0/bin/artemis consumer --destination helloworld --message-count 50 --url tcp://localhost:61616
   
   Consumer:: filter = null
   Consumer ActiveMQQueue[helloworld], thread=0 wait until 50 messages are consumed
   Consumer ActiveMQQueue[helloworld], thread=0 Consumed: 50 messages
   Consumer ActiveMQQueue[helloworld], thread=0 Consumer thread finished

7. In the web console, verify that the Message count is 0.

   All of the messages stored in the helloworld queue were consumed, and the queue is now empty.