Chapter 13. Bean Validator

Only producer is supported

The Validator component performs bean validation of the message body using the Java Bean Validation API (). Camel uses the reference implementation, which is Hibernate Validator.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-bean-validator</artifactId>
    <version>{CamelSBVersion}</version>
    <!-- use the same version as your Camel core version -->
</dependency>

13.1. URI format

bean-validator:label[?options]

Where label is an arbitrary text value describing the endpoint. You can append query options to the URI in the following format,

?option=value&option=value&…

13.2. Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

13.2.1. Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

13.2.2. Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

13.3. Component Options

The Bean Validator component supports 8 options, which are listed below.

Name	Description	Default	Type
ignoreXmlConfiguration (producer)	Whether to ignore data from the META-INF/validation.xml file.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
constraintValidatorFactory (advanced)	To use a custom ConstraintValidatorFactory.		ConstraintValidatorFactory
messageInterpolator (advanced)	To use a custom MessageInterpolator.		MessageInterpolator
traversableResolver (advanced)	To use a custom TraversableResolver.		TraversableResolver
validationProviderResolver (advanced)	To use a a custom ValidationProviderResolver.		ValidationProviderResolver
validatorFactory (advanced)	Autowired To use a custom ValidatorFactory.		ValidatorFactory

13.4. Endpoint Options

The Bean Validator endpoint is configured using URI syntax:

bean-validator:label

with the following path and query parameters:

13.4.1. Path Parameters (1 parameters)

Name	Description	Default	Type
label (producer)	Required Where label is an arbitrary text value describing the endpoint.		String

13.4.2. Query Parameters (8 parameters)

Name	Description	Default	Type
group (producer)	To use a custom validation group.	javax.validation.groups.Default	String
ignoreXmlConfiguration (producer)	Whether to ignore data from the META-INF/validation.xml file.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
constraintValidatorFactory (advanced)	To use a custom ConstraintValidatorFactory.		ConstraintValidatorFactory
messageInterpolator (advanced)	To use a custom MessageInterpolator.		MessageInterpolator
traversableResolver (advanced)	To use a custom TraversableResolver.		TraversableResolver
validationProviderResolver (advanced)	To use a a custom ValidationProviderResolver.		ValidationProviderResolver
validatorFactory (advanced)	To use a custom ValidatorFactory.		ValidatorFactory

13.5. OSGi deployment

To use Hibernate Validator in the OSGi environment use dedicated ValidationProviderResolver implementation, just as org.apache.camel.component.bean.validator.HibernateValidationProviderResolver. The snippet below demonstrates this approach. You can also use HibernateValidationProviderResolver.

Using HibernateValidationProviderResolver

from("direct:test").
  to("bean-validator://ValidationProviderResolverTest?validationProviderResolver=#myValidationProviderResolver");

<bean id="myValidationProviderResolver" class="org.apache.camel.component.bean.validator.HibernateValidationProviderResolver"/>

If no custom ValidationProviderResolver is defined and the validator component has been deployed into the OSGi environment, the HibernateValidationProviderResolver will be automatically used.

13.6. Example

Assumed we have a java bean with the following annotations

Car.java

public class Car {

    @NotNull
    private String manufacturer;

    @NotNull
    @Size(min = 5, max = 14, groups = OptionalChecks.class)
    private String licensePlate;

    // getter and setter
}

and an interface definition for our custom validation group

OptionalChecks.java

public interface OptionalChecks {
}

with the following Camel route, only the @NotNull constraints on the attributes manufacturer and licensePlate will be validated (Camel uses the default group javax.validation.groups.Default).

from("direct:start")
.to("bean-validator://x")
.to("mock:end")

If you want to check the constraints from the group OptionalChecks, you have to define the route like this

from("direct:start")
.to("bean-validator://x?group=OptionalChecks")
.to("mock:end")

If you want to check the constraints from both groups, you have to define a new interface first

AllChecks.java

@GroupSequence({Default.class, OptionalChecks.class})
public interface AllChecks {
}

and then your route definition should looks like this

from("direct:start")
.to("bean-validator://x?group=AllChecks")
.to("mock:end")

And if you have to provide your own message interpolator, traversable resolver and constraint validator factory, you have to write a route like this

<bean id="myMessageInterpolator" class="my.ConstraintValidatorFactory" />
<bean id="myTraversableResolver" class="my.TraversableResolver" />
<bean id="myConstraintValidatorFactory" class="my.ConstraintValidatorFactory" />

from("direct:start")
.to("bean-validator://x?group=AllChecks&messageInterpolator=#myMessageInterpolator
&traversableResolver=#myTraversableResolver&constraintValidatorFactory=#myConstraintValidatorFactory")
.to("mock:end")

It’s also possible to describe your constraints as XML and not as Java annotations. In this case, you have to provide the file META-INF/validation.xml which could looks like this

validation.xml

<validation-config
    xmlns="http://jboss.org/xml/ns/javax/validation/configuration"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://jboss.org/xml/ns/javax/validation/configuration">

    <default-provider>org.hibernate.validator.HibernateValidator</default-provider>
    <message-interpolator>org.hibernate.validator.engine.ResourceBundleMessageInterpolator</message-interpolator>
    <traversable-resolver>org.hibernate.validator.engine.resolver.DefaultTraversableResolver</traversable-resolver>
    <constraint-validator-factory>org.hibernate.validator.engine.ConstraintValidatorFactoryImpl</constraint-validator-factory>
    <constraint-mapping>/constraints-car.xml</constraint-mapping>

</validation-config>

and the constraints-car.xml file

constraints-car.xml

<constraint-mappings xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://jboss.org/xml/ns/javax/validation/mapping validation-mapping-1.0.xsd"
    xmlns="http://jboss.org/xml/ns/javax/validation/mapping">

    <default-package>org.apache.camel.component.bean.validator</default-package>

    <bean class="CarWithoutAnnotations" ignore-annotations="true">
        <field name="manufacturer">
            <constraint annotation="javax.validation.constraints.NotNull" />
        </field>

        <field name="licensePlate">
            <constraint annotation="javax.validation.constraints.NotNull" />

            <constraint annotation="javax.validation.constraints.Size">
                <groups>
                    <value>org.apache.camel.component.bean.validator.OptionalChecks</value>
                </groups>
                <element name="min">5</element>
                <element name="max">14</element>
            </constraint>
        </field>
    </bean>
</constraint-mappings>

Here is the XML syntax for the example route definition for OrderedChecks.

Note that the body should include an instance of a class to validate.

<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
    http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">

    <camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
        <route>
            <from uri="direct:start"/>
            <to uri="bean-validator://x?group=org.apache.camel.component.bean.validator.OrderedChecks"/>
        </route>
    </camelContext>
</beans>

13.7. Spring Boot Auto-Configuration

When using bean-validator with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-bean-validator-starter</artifactId>
</dependency>

The component supports 9 options, which are listed below.

Name	Description	Default	Type
camel.component.bean-validator.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.bean-validator.constraint-validator-factory	To use a custom ConstraintValidatorFactory. The option is a javax.validation.ConstraintValidatorFactory type.		ConstraintValidatorFactory
camel.component.bean-validator.enabled	Whether to enable auto configuration of the bean-validator component. This is enabled by default.		Boolean
camel.component.bean-validator.ignore-xml-configuration	Whether to ignore data from the META-INF/validation.xml file.	false	Boolean
camel.component.bean-validator.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.bean-validator.message-interpolator	To use a custom MessageInterpolator. The option is a javax.validation.MessageInterpolator type.		MessageInterpolator
camel.component.bean-validator.traversable-resolver	To use a custom TraversableResolver. The option is a javax.validation.TraversableResolver type.		TraversableResolver
camel.component.bean-validator.validation-provider-resolver	To use a a custom ValidationProviderResolver. The option is a javax.validation.ValidationProviderResolver type.		ValidationProviderResolver
camel.component.bean-validator.validator-factory	To use a custom ValidatorFactory. The option is a javax.validation.ValidatorFactory type.		ValidatorFactory

Chapter 13. Bean Validator

13.1. URI format

13.2. Configuring Options

13.2.1. Configuring Component Options

13.2.2. Configuring Endpoint Options

13.3. Component Options

13.4. Endpoint Options

13.4.1. Path Parameters (1 parameters)

13.4.2. Query Parameters (8 parameters)

13.5. OSGi deployment

13.6. Example

13.7. Spring Boot Auto-Configuration

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

Making open source more inclusive

About Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links