Search

Chapter 6. Encrypting cluster transport

download PDF

Secure cluster transport so that nodes communicate with encrypted messages. You can also configure Data Grid clusters to perform certificate authentication so that only nodes with valid identities can join.

6.1. Securing cluster transport with TLS identities

Add SSL/TLS identities to a Data Grid Server security realm and use them to secure cluster transport. Nodes in the Data Grid Server cluster then exchange SSL/TLS certificates to encrypt JGroups messages, including RELAY messages if you configure cross-site replication.

Prerequisites

  • Install a Data Grid Server cluster.

Procedure

  1. Create a TLS keystore that contains a single certificate to identify Data Grid Server.

    You can also use a PEM file if it contains a private key in PKCS#1 or PKCS#8 format, a certificate, and has an empty password: password="".

    Note

    If the certificate in the keystore is not signed by a public certificate authority (CA) then you must also create a trust store that contains either the signing certificate or the public key.

  2. Add the keystore to the $RHDG_HOME/server/conf directory.
  3. Add the keystore to a new security realm in your Data Grid Server configuration.

    Important

    You should create dedicated keystores and security realms so that Data Grid Server endpoints do not use the same security realm as cluster transport.

    <server xmlns="urn:infinispan:server:14.0">
      <security>
        <security-realms>
          <security-realm name="cluster-transport">
            <server-identities>
              <ssl>
                <!-- Adds a keystore that contains a certificate that provides SSL/TLS identity to encrypt cluster transport. -->
                <keystore path="server.pfx"
                          relative-to="infinispan.server.config.path"
                          password="secret"
                          alias="server"/>
              </ssl>
            </server-identities>
          </security-realm>
        </security-realms>
      </security>
    </server>
  4. Configure cluster transport to use the security realm by specifying the name of the security realm with the server:security-realm attribute.

    <infinispan>
      <cache-container>
        <transport server:security-realm="cluster-transport"/>
      </cache-container>
    </infinispan>

Verification

When you start Data Grid Server, the following log message indicates that the cluster is using the security realm for cluster transport:

[org.infinispan.SERVER] ISPN080060: SSL Transport using realm <security_realm_name>

6.2. JGroups encryption protocols

To secure cluster traffic, you can configure Data Grid nodes to encrypt JGroups message payloads with secret keys.

Data Grid nodes can obtain secret keys from either:

  • The coordinator node (asymmetric encryption).
  • A shared keystore (symmetric encryption).

Retrieving secret keys from coordinator nodes

You configure asymmetric encryption by adding the ASYM_ENCRYPT protocol to a JGroups stack in your Data Grid configuration. This allows Data Grid clusters to generate and distribute secret keys.

Important

When using asymmetric encryption, you should also provide keystores so that nodes can perform certificate authentication and securely exchange secret keys. This protects your cluster from man-in-the-middle (MitM) attacks.

Asymmetric encryption secures cluster traffic as follows:

  1. The first node in the Data Grid cluster, the coordinator node, generates a secret key.
  2. A joining node performs certificate authentication with the coordinator to mutually verify identity.
  3. The joining node requests the secret key from the coordinator node. That request includes the public key for the joining node.
  4. The coordinator node encrypts the secret key with the public key and returns it to the joining node.
  5. The joining node decrypts and installs the secret key.
  6. The node joins the cluster, encrypting and decrypting messages with the secret key.

Retrieving secret keys from shared keystores

You configure symmetric encryption by adding the SYM_ENCRYPT protocol to a JGroups stack in your Data Grid configuration. This allows Data Grid clusters to obtain secret keys from keystores that you provide.

  1. Nodes install the secret key from a keystore on the Data Grid classpath at startup.
  2. Node join clusters, encrypting and decrypting messages with the secret key.

Comparison of asymmetric and symmetric encryption

ASYM_ENCRYPT with certificate authentication provides an additional layer of encryption in comparison with SYM_ENCRYPT. You provide keystores that encrypt the requests to coordinator nodes for the secret key. Data Grid automatically generates that secret key and handles cluster traffic, while letting you specify when to generate secret keys. For example, you can configure clusters to generate new secret keys when nodes leave. This ensures that nodes cannot bypass certificate authentication and join with old keys.

SYM_ENCRYPT, on the other hand, is faster than ASYM_ENCRYPT because nodes do not need to exchange keys with the cluster coordinator. A potential drawback to SYM_ENCRYPT is that there is no configuration to automatically generate new secret keys when cluster membership changes. Users are responsible for generating and distributing the secret keys that nodes use to encrypt cluster traffic.

6.3. Securing cluster transport with asymmetric encryption

Configure Data Grid clusters to generate and distribute secret keys that encrypt JGroups messages.

Procedure

  1. Create a keystore with certificate chains that enables Data Grid to verify node identity.
  2. Place the keystore on the classpath for each node in the cluster.

    For Data Grid Server, you put the keystore in the $RHDG_HOME directory.

  3. Add the SSL_KEY_EXCHANGE and ASYM_ENCRYPT protocols to a JGroups stack in your Data Grid configuration, as in the following example:

    <infinispan>
      <jgroups>
        <!-- Creates a secure JGroups stack named "encrypt-tcp" that extends the default TCP stack. -->
        <stack name="encrypt-tcp" extends="tcp">
          <!-- Adds a keystore that nodes use to perform certificate authentication. -->
          <!-- Uses the stack.combine and stack.position attributes to insert SSL_KEY_EXCHANGE into the default TCP stack after VERIFY_SUSPECT2. -->
          <SSL_KEY_EXCHANGE keystore_name="mykeystore.jks"
                            keystore_password="changeit"
                            stack.combine="INSERT_AFTER"
                            stack.position="VERIFY_SUSPECT2"/>
          <!-- Configures ASYM_ENCRYPT -->
          <!-- Uses the stack.combine and stack.position attributes to insert ASYM_ENCRYPT into the default TCP stack before pbcast.NAKACK2. -->
          <!-- The use_external_key_exchange = "true" attribute configures nodes to use the `SSL_KEY_EXCHANGE` protocol for certificate authentication. -->
          <ASYM_ENCRYPT asym_keylength="2048"
                        asym_algorithm="RSA"
                        change_key_on_coord_leave = "false"
                        change_key_on_leave = "false"
                        use_external_key_exchange = "true"
                        stack.combine="INSERT_BEFORE"
                        stack.position="pbcast.NAKACK2"/>
        </stack>
      </jgroups>
      <cache-container name="default" statistics="true">
        <!-- Configures the cluster to use the JGroups stack. -->
        <transport cluster="${infinispan.cluster.name}"
                   stack="encrypt-tcp"
                   node-name="${infinispan.node.name:}"/>
      </cache-container>
    </infinispan>

Verification

When you start your Data Grid cluster, the following log message indicates that the cluster is using the secure JGroups stack:

[org.infinispan.CLUSTER] ISPN000078: Starting JGroups channel cluster with stack <encrypted_stack_name>

Data Grid nodes can join the cluster only if they use ASYM_ENCRYPT and can obtain the secret key from the coordinator node. Otherwise the following message is written to Data Grid logs:

[org.jgroups.protocols.ASYM_ENCRYPT] <hostname>: received message without encrypt header from <hostname>; dropping it

Additional resources

6.4. Securing cluster transport with symmetric encryption

Configure Data Grid clusters to encrypt JGroups messages with secret keys from keystores that you provide.

Procedure

  1. Create a keystore that contains a secret key.
  2. Place the keystore on the classpath for each node in the cluster.

    For Data Grid Server, you put the keystore in the $RHDG_HOME directory.

  3. Add the SYM_ENCRYPT protocol to a JGroups stack in your Data Grid configuration.
<infinispan>
  <jgroups>
    <!-- Creates a secure JGroups stack named "encrypt-tcp" that extends the default TCP stack. -->
    <stack name="encrypt-tcp" extends="tcp">
      <!-- Adds a keystore from which nodes obtain secret keys. -->
      <!-- Uses the stack.combine and stack.position attributes to insert SYM_ENCRYPT into the default TCP stack after VERIFY_SUSPECT2. -->
      <SYM_ENCRYPT keystore_name="myKeystore.p12"
                   keystore_type="PKCS12"
                   store_password="changeit"
                   key_password="changeit"
                   alias="myKey"
                   stack.combine="INSERT_AFTER"
                   stack.position="VERIFY_SUSPECT2"/>
    </stack>
  </jgroups>
  <cache-container name="default" statistics="true">
    <!-- Configures the cluster to use the JGroups stack. -->
    <transport cluster="${infinispan.cluster.name}"
               stack="encrypt-tcp"
               node-name="${infinispan.node.name:}"/>
  </cache-container>
</infinispan>

Verification

When you start your Data Grid cluster, the following log message indicates that the cluster is using the secure JGroups stack:

[org.infinispan.CLUSTER] ISPN000078: Starting JGroups channel cluster with stack <encrypted_stack_name>

Data Grid nodes can join the cluster only if they use SYM_ENCRYPT and can obtain the secret key from the shared keystore. Otherwise the following message is written to Data Grid logs:

[org.jgroups.protocols.SYM_ENCRYPT] <hostname>: received message without encrypt header from <hostname>; dropping it

Additional resources

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.