Chapter 2. Creating C or C++ Applications
Red Hat offers multiple tools for creating applications using the C and C++ languages. This part of the book lists some of the most common development tasks.
2.1. GCC in RHEL 9
Red Hat Enterprise Linux 9 is distributed with GCC 11 as the standard compiler.
The default language standard setting for GCC 11 is C++17. This is equivalent to explicitly using the command-line option -std=gnu++17
.
Later language standards, such as C++20 and so on, and library features introduced in these later language standards are still considered experimental.
Additional resources
2.2. Building Code with GCC
Learn about situations where source code must be transformed into executable code.
2.2.1. Relationship between code forms
Prerequisites
- Understanding the concepts of compiling and linking
Possible code forms
The C and C++ languages have three forms of code:
Source code written in the C or C++ language, present as plain text files.
The files typically use extensions such as
.c
,.cc
,.cpp
,.h
,.hpp
,.i
,.inc
. For a complete list of supported extensions and their interpretation, see the gcc manual pages:$ man gcc
Object code, created by compiling the source code with a compiler. This is an intermediate form.
The object code files use the
.o
extension.Executable code, created by linking object code with a linker.
Linux application executable files do not use any file name extension. Shared object (library) executable files use the
.so
file name extension.
Library archive files for static linking also exist. This is a variant of object code that uses the .a
file name extension. Static linking is not recommended. See Section 2.3.2, “Static and dynamic linking”.
Handling of code forms in GCC
Producing executable code from source code is performed in two steps, which require different applications or tools. GCC can be used as an intelligent driver for both compilers and linkers. This allows you to use a single gcc
command for any of the required actions (compiling and linking). GCC automatically selects the actions and their sequence:
- Source files are compiled to object files.
- Object files and libraries are linked (including the previously compiled sources).
It is possible to run GCC so that it performs only compiling, only linking, or both compiling and linking in a single step. This is determined by the types of inputs and requested type of output(s).
Because larger projects require a build system which usually runs GCC separately for each action, it is better to always consider compilation and linking as two distinct actions, even if GCC can perform both at once.
2.2.2. Compiling source files to object code
To create object code files from source files and not an executable file immediately, GCC must be instructed to create only object code files as its output. This action represents the basic operation of the build process for larger projects.
Prerequisites
- C or C++ source code file(s)
- GCC installed on the system
Procedure
- Change to the directory containing the source code file(s).
Run
gcc
with the-c
option:$ gcc -c source.c another_source.c
Object files are created, with their file names reflecting the original source code files:
source.c
results insource.o
.NoteWith C++ source code, replace the
gcc
command withg++
for convenient handling of C++ Standard Library dependencies.
2.2.3. Enabling debugging of C and C++ applications with GCC
Because debugging information is large, it is not included in executable files by default. To enable debugging of your C and C++ applications with it, you must explicitly instruct the compiler to create it.
To enable creation of debugging information with GCC when compiling and linking code, use the -g
option:
$ gcc ... -g ...
-
Optimizations performed by the compiler and linker can result in executable code which is hard to relate to the original source code: variables may be optimized out, loops unrolled, operations merged into the surrounding ones, and so on. This affects debugging negatively. For improved debugging experience, consider setting the optimization with the
-Og
option. However, changing the optimization level changes the executable code and may change the actual behaviour including removing some bugs. -
To also include macro definitions in the debug information, use the
-g3
option instead of-g
. -
The
-fcompare-debug
GCC option tests code compiled by GCC with debug information and without debug information. The test passes if the resulting two binary files are identical. This test ensures that executable code is not affected by any debugging options, which further ensures that there are no hidden bugs in the debug code. Note that using the-fcompare-debug
option significantly increases compilation time. See the GCC manual page for details about this option.
Additional resources
- Using the GNU Compiler Collection (GCC) — Options for Debugging Your Program
- Debugging with GDB — Debugging Information in Separate Files
The GCC manual page:
$ man gcc
2.2.4. Code optimization with GCC
A single program can be transformed into more than one sequence of machine instructions. You can achieve a more optimal result if you allocate more resources to analyzing the code during compilation.
With GCC, you can set the optimization level using the -Olevel
option. This option accepts a set of values in place of the level.
Level | Description |
---|---|
| Optimize for compilation speed - no code optimization (default). |
| Optimize to increase code execution speed (the larger the number, the greater the speed). |
| Optimize for file size. |
|
Same as a level |
| Optimize for debugging experience. |
For release builds, use the optimization option -O2
.
During development, the -Og
option is useful for debugging the program or library in some situations. Because some bugs manifest only with certain optimization levels, test the program or library with the release optimization level.
GCC offers a large number of options to enable individual optimizations. For more information, see the following Additional resources.
Additional resources
- Using GNU Compiler Collection — Options That Control Optimization
Linux manual page for GCC:
$ man gcc
2.2.5. Options for hardening code with GCC
When the compiler transforms source code to object code, it can add various checks to prevent commonly exploited situations and increase security. Choosing the right set of compiler options can help produce more secure programs and libraries, without having to change the source code.
Release version options
The following list of options is the recommended minimum for developers targeting Red Hat Enterprise Linux:
$ gcc ... -O2 -g -Wall -Wl,-z,now,-z,relro -fstack-protector-strong -fstack-clash-protection -D_FORTIFY_SOURCE=2 ...
-
For programs, add the
-fPIE
and-pie
Position Independent Executable options. -
For dynamically linked libraries, the mandatory
-fPIC
(Position Independent Code) option indirectly increases security.
Development options
Use the following options to detect security flaws during development. Use these options in conjunction with the options for the release version:
$ gcc ... -Walloc-zero -Walloca-larger-than -Wextra -Wformat-security -Wvla-larger-than ...
Additional resources
- Defensive Coding Guide
- Memory Error Detection Using GCC — Red Hat Developers Blog post
2.2.6. Linking code to create executable files
Linking is the final step when building a C or C++ application. Linking combines all object files and libraries into an executable file.
Prerequisites
- One or more object file(s)
- GCC must be installed on the system
Procedure
- Change to the directory containing the object code file(s).
Run
gcc
:$ gcc ... objfile.o another_object.o ... -o executable-file
An executable file named executable-file is created from the supplied object files and libraries.
To link additional libraries, add the required options after the list of object files.
NoteWith C++ source code, replace the
gcc
command withg++
for convenient handling of C++ Standard Library dependencies.
2.2.7. Example: Building a C program with GCC (compiling and linking in one step)
This example shows the exact steps to build a simple sample C program.
In this example, compiling and linking the code is done in one step.
Prerequisites
- You must understand how to use GCC.
Procedure
Create a directory
hello-c
and change to it:$ mkdir hello-c $ cd hello-c
Create file
hello.c
with the following contents:#include <stdio.h> int main() { printf("Hello, World!\n"); return 0; }
Compile and link the code with GCC:
$ gcc hello.c -o helloworld
This compiles the code, creates the object file
hello.o
, and links the executable filehelloworld
from the object file.Run the resulting executable file:
$ ./helloworld Hello, World!
2.2.8. Example: Building a C program with GCC (compiling and linking in two steps)
This example shows the exact steps to build a simple sample C program.
In this example, compiling and linking the code are two separate steps.
Prerequisites
- You must understand how to use GCC.
Procedure
Create a directory
hello-c
and change to it:$ mkdir hello-c $ cd hello-c
Create file
hello.c
with the following contents:#include <stdio.h> int main() { printf("Hello, World!\n"); return 0; }
Compile the code with GCC:
$ gcc -c hello.c
The object file
hello.o
is created.Link an executable file
helloworld
from the object file:$ gcc hello.o -o helloworld
Run the resulting executable file:
$ ./helloworld Hello, World!
2.2.9. Example: Building a C++ program with GCC (compiling and linking in one step)
This example shows the exact steps to build a sample minimal C++ program.
In this example, compiling and linking the code is done in one step.
Prerequisites
-
You must understand the difference between
gcc
andg++
.
Procedure
Create a directory
hello-cpp
and change to it:$ mkdir hello-cpp $ cd hello-cpp
Create file
hello.cpp
with the following contents:#include <iostream> int main() { std::cout << "Hello, World!\n"; return 0; }
Compile and link the code with
g++
:$ g++ hello.cpp -o helloworld
This compiles the code, creates the object file
hello.o
, and links the executable filehelloworld
from the object file.Run the resulting executable file:
$ ./helloworld Hello, World!
2.2.10. Example: Building a C++ program with GCC (compiling and linking in two steps)
This example shows the exact steps to build a sample minimal C++ program.
In this example, compiling and linking the code are two separate steps.
Prerequisites
-
You must understand the difference between
gcc
andg++
.
Procedure
Create a directory
hello-cpp
and change to it:$ mkdir hello-cpp $ cd hello-cpp
Create file
hello.cpp
with the following contents:#include <iostream> int main() { std::cout << "Hello, World!\n"; return 0; }
Compile the code with
g++
:$ g++ -c hello.cpp
The object file
hello.o
is created.Link an executable file
helloworld
from the object file:$ g++ hello.o -o helloworld
Run the resulting executable file:
$ ./helloworld Hello, World!
2.3. Using Libraries with GCC
Learn about using libraries in code.
2.3.1. Library naming conventions
A special file name convention is used for libraries: a library known as foo is expected to exist as file libfoo.so
or libfoo.a
. This convention is automatically understood by the linking input options of GCC, but not by the output options:
When linking against the library, the library can be specified only by its name foo with the
-l
option as-lfoo
:$ gcc ... -lfoo ...
-
When creating the library, the full file name
libfoo.so
orlibfoo.a
must be specified.
2.3.2. Static and dynamic linking
Developers have a choice of using static or dynamic linking when building applications with fully compiled languages. It is important to understand the differences between static and dynamic linking, particularly in the context using the C and C++ languages on Red Hat Enterprise Linux. To summarize, Red Hat discourages the use of static linking in applications for Red Hat Enterprise Linux.
Comparison of static and dynamic linking
Static linking makes libraries part of the resulting executable file. Dynamic linking keeps these libraries as separate files.
Dynamic and static linking can be compared in a number of ways:
- Resource use
Static linking results in larger executable files which contain more code. This additional code coming from libraries cannot be shared across multiple programs on the system, increasing file system usage and memory usage at run time. Multiple processes running the same statically linked program will still share the code.
On the other hand, static applications need fewer run-time relocations, leading to reduced startup time, and require less private resident set size (RSS) memory. Generated code for static linking can be more efficient than for dynamic linking due to the overhead introduced by position-independent code (PIC).
- Security
- Dynamically linked libraries which provide ABI compatibility can be updated without changing the executable files depending on these libraries. This is especially important for libraries provided by Red Hat as part of Red Hat Enterprise Linux, where Red Hat provides security updates. Static linking against any such libraries is strongly discouraged.
- Compatibility
Static linking appears to provide executable files independent of the versions of libraries provided by the operating system. However, most libraries depend on other libraries. With static linking, this dependency becomes inflexible and as a result, both forward and backward compatibility is lost. Static linking is guaranteed to work only on the system where the executable file was built.
WarningApplications linking statically libraries from the GNU C library (glibc) still require glibc to be present on the system as a dynamic library. Furthermore, the dynamic library variant of glibc available at the application’s run time must be a bitwise identical version to that present while linking the application. As a result, static linking is guaranteed to work only on the system where the executable file was built.
- Support coverage
- Most static libraries provided by Red Hat are in the CodeReady Linux Builder channel and not supported by Red Hat.
- Functionality
Some libraries, notably the GNU C Library (glibc), offer reduced functionality when linked statically.
For example, when statically linked, glibc does not support threads and any form of calls to the
dlopen()
function in the same program.
As a result of the listed disadvantages, static linking should be avoided at all costs, particularly for whole applications and the glibc and libstdc++ libraries.
Cases for static linking
Static linking might be a reasonable choice in some cases, such as:
- Using a library which is not enabled for dynamic linking.
-
Fully static linking can be required for running code in an empty chroot environment or container. However, static linking using the
glibc-static
package is not supported by Red Hat.
2.3.3. Link time optimization
Link time optimization (LTO) enables the compiler to perform various optimizations across all translation units of your program by using its intermediate representation at link time. As a result, your executable files and libraries are smaller and run faster. Also, you can analyze package source code at compile time more thoroughly by using LTO, which improves various GCC diagnostics for potential coding errors.
Known issues
Violating the One Definition Rule (ODR) produces a
-Wodr
warningViolations of the ODR resulting in undefined behavior produce a
-Wodr
warning. This usually points to a bug in your program. The-Wodr
warning is enabled by default.LTO causes increased memory consumption
The compiler consumes more memory when it processes the translation units the program consists of. On systems with limited memory, disable LTO or lower the parallelism level when building your program.
GCC removes seemingly unused functions
GCC may remove functions it considers unused because the compiler is unable to recognize which symbols an asm() statement references. A compilation error may occur as a result. To prevent this, add
__attribute__((used))
to the symbols you use in your program.Compiling with the
-fPIC
option causes errorsBecause GCC does not parse the contents of asm() statements, compiling your code with the
-fPIC
command-line option can cause errors. To prevent this, use the-fno-lto
option when compiling your translation unit.
More information is available at LTO FAQ — Symbol usage from assembly language.Symbol versioning by using the
.symver
directive is not compatible with LTOImplementing symbol versioning by using the
.symver
directive in an asm() statement is not compatible with LTO. However, it is possible to implement symbol versioning using thesymver
attribute. For example:__attribute__ ((_symver_ ("<symbol>@VERS_1"))) void <symbol>_v1 (void) { }
Additional resources
2.3.4. Using a library with GCC
A library is a package of code which can be reused in your program. A C or C++ library consists of two parts:
- The library code
- Header files
Compiling code that uses a library
The header files describe the interface of the library: the functions and variables available in the library. Information from the header files is needed for compiling the code.
Typically, header files of a library will be placed in a different directory than your application’s code. To tell GCC where the header files are, use the -I
option:
$ gcc ... -Iinclude_path ...
Replace include_path with the actual path to the header file directory.
The -I
option can be used multiple times to add multiple directories with header files. When looking for a header file, these directories are searched in the order of their appearance in the -I
options.
Linking code that uses a library
When linking the executable file, both the object code of your application and the binary code of the library must be available. The code for static and dynamic libraries is present in different forms:
-
Static libraries are available as archive files. They contain a group of object files. The archive file has a file name extension
.a
. -
Dynamic libraries are available as shared objects. They are a form of an executable file. A shared object has a file name extension
.so
.
To tell GCC where the archives or shared object files of a library are, use the -L
option:
$ gcc ... -Llibrary_path -lfoo ...
Replace library_path with the actual path to the library directory.
The -L
option can be used multiple times to add multiple directories. When looking for a library, these directories are searched in the order of their -L
options.
The order of options matters: GCC cannot link against a library foo unless it knows the directory with this library. Therefore, use the -L
options to specify library directories before using the -l
options for linking against libraries.
Compiling and linking code which uses a library in one step
When the situation allows the code to be compiled and linked in one gcc
command, use the options for both situations mentioned above at once.
Additional resources
- Using the GNU Compiler Collection (GCC) — Options for Directory Search
- Using the GNU Compiler Collection (GCC) — Options for Linking
2.3.5. Using a static library with GCC
Static libraries are available as archives containing object files. After linking, they become part of the resulting executable file.
Red Hat discourages use of static linking for security reasons. See Section 2.3.2, “Static and dynamic linking”. Use static linking only when necessary, especially against libraries provided by Red Hat.
Prerequisites
- GCC must be installed on your system.
- You must understand static and dynamic linking.
- You have a set of source or object files forming a valid program, requiring some static library foo and no other libraries.
-
The foo library is available as a file
libfoo.a
, and no filelibfoo.so
is provided for dynamic linking.
Most libraries which are part of Red Hat Enterprise Linux are supported for dynamic linking only. The steps below only work for libraries which are not enabled for dynamic linking.
Procedure
To link a program from source and object files, adding a statically linked library foo, which is to be found as a file libfoo.a
:
- Change to the directory containing your code.
Compile the program source files with headers of the foo library:
$ gcc ... -Iheader_path -c ...
Replace header_path with a path to a directory containing the header files for the foo library.
Link the program with the foo library:
$ gcc ... -Llibrary_path -lfoo ...
Replace library_path with a path to a directory containing the file
libfoo.a
.To run the program later, simply:
$ ./program
The -static
GCC option related to static linking forbids all dynamic linking. Instead, use the -Wl,-Bstatic
and -Wl,-Bdynamic
options to control linker behavior more precisely. See Section 2.3.7, “Using both static and dynamic libraries with GCC”.
2.3.6. Using a dynamic library with GCC
Dynamic libraries are available as standalone executable files, required at both linking time and run time. They stay independent of your application’s executable file.
Prerequisites
- GCC must be installed on the system.
- A set of source or object files forming a valid program, requiring some dynamic library foo and no other libraries.
- The foo library must be available as a file libfoo.so.
Linking a program against a dynamic library
To link a program against a dynamic library foo:
$ gcc ... -Llibrary_path -lfoo ...
When a program is linked against a dynamic library, the resulting program must always load the library at run time. There are two options for locating the library:
-
Using a
rpath
value stored in the executable file itself -
Using the
LD_LIBRARY_PATH
variable at run time
Using a rpath
Value Stored in the Executable File
The rpath
is a special value saved as a part of an executable file when it is being linked. Later, when the program is loaded from its executable file, the runtime linker will use the rpath
value to locate the library files.
While linking with GCC, to store the path library_path as rpath
:
$ gcc ... -Llibrary_path -lfoo -Wl,-rpath=library_path ...
The path library_path must point to a directory containing the file libfoo.so.
Do not add a space after the comma in the -Wl,-rpath=
option.
To run the program later:
$ ./program
Using the LD_LIBRARY_PATH environment variable
If no rpath
is found in the program’s executable file, the runtime linker will use the LD_LIBRARY_PATH
environment variable. The value of this variable must be changed for each program. This value should represent the path where the shared library objects are located.
To run the program without rpath
set, with libraries present in path library_path:
$ export LD_LIBRARY_PATH=library_path:$LD_LIBRARY_PATH
$ ./program
Leaving out the rpath
value offers flexibility, but requires setting the LD_LIBRARY_PATH
variable every time the program is to run.
Placing the Library into the Default Directories
The runtime linker configuration specifies a number of directories as a default location of dynamic library files. To use this default behaviour, copy your library to the appropriate directory.
A full description of the dynamic linker behavior is out of scope of this document. For more information, see the following resources:
Linux manual pages for the dynamic linker:
$ man ld.so
Contents of the
/etc/ld.so.conf
configuration file:$ cat /etc/ld.so.conf
Report of the libraries recognized by the dynamic linker without additional configuration, which includes the directories:
$ ldconfig -v
2.3.7. Using both static and dynamic libraries with GCC
Sometimes it is required to link some libraries statically and some dynamically. This situation brings some challenges.
Prerequisites
- Understanding static and dynamic linking
Introduction
gcc recognizes both dynamic and static libraries. When the -lfoo
option is encountered, gcc will first attempt to locate a shared object (a .so
file) containing a dynamically linked version of the foo library, and then look for the archive file (.a
) containing a static version of the library. Thus, the following situations can result from this search:
- Only the shared object is found, and gcc links against it dynamically.
- Only the archive is found, and gcc links against it statically.
- Both the shared object and archive are found, and by default, gcc selects dynamic linking against the shared object.
- Neither shared object nor archive is found, and linking fails.
Because of these rules, the best way to select the static or dynamic version of a library for linking is having only that version found by gcc. This can be controlled to some extent by using or leaving out directories containing the library versions, when specifying the -Lpath
options.
Additionally, because dynamic linking is the default, the only situation where linking must be explicitly specified is when a library with both versions present should be linked statically. There are two possible resolutions:
-
Specifying the static libraries by file path instead of the
-l
option -
Using the
-Wl
option to pass options to the linker
Specifying the static libraries by file
Usually, gcc is instructed to link against the foo library with the -lfoo
option. However, it is possible to specify the full path to file libfoo.a
containing the library instead:
$ gcc ... path/to/libfoo.a ...
From the file extension .a
, gcc will understand that this is a library to link with the program. However, specifying the full path to the library file is a less flexible method.
Using the -Wl
option
The gcc option -Wl
is a special option for passing options to the underlying linker. Syntax of this option differs from the other gcc options. The -Wl
option is followed by a comma-separated list of linker options, while other gcc options require space-separated list of options.
The ld linker used by gcc offers the options -Bstatic
and -Bdynamic
to specify whether libraries following this option should be linked statically or dynamically, respectively. After passing -Bstatic
and a library to the linker, the default dynamic linking behaviour must be restored manually for the following libraries to be linked dynamically with the -Bdynamic
option.
To link a program, link library first statically (libfirst.a
) and second dynamically (libsecond.so
):
$ gcc ... -Wl,-Bstatic -lfirst -Wl,-Bdynamic -lsecond ...
gcc can be configured to use linkers other than the default ld.
Additional resources
- Using the GNU Compiler Collection (GCC) — 3.14 Options for Linking
- Documentation for binutils 2.27 — 2.1 Command Line Options
2.4. Creating libraries with GCC
Learn about the steps to creating libraries and the necessary concepts used by the Linux operating system for libraries.
2.4.1. Library naming conventions
A special file name convention is used for libraries: a library known as foo is expected to exist as file libfoo.so
or libfoo.a
. This convention is automatically understood by the linking input options of GCC, but not by the output options:
When linking against the library, the library can be specified only by its name foo with the
-l
option as-lfoo
:$ gcc ... -lfoo ...
-
When creating the library, the full file name
libfoo.so
orlibfoo.a
must be specified.
2.4.2. The soname mechanism
Dynamically loaded libraries (shared objects) use a mechanism called soname to manage multiple compatible versions of a library.
Prerequisites
- You must understand dynamic linking and libraries.
- You must understand the concept of ABI compatibility.
- You must understand library naming conventions.
- You must understand symbolic links.
Problem introduction
A dynamically loaded library (shared object) exists as an independent executable file. This makes it possible to update the library without updating the applications that depend on it. However, the following problems arise with this concept:
- Identification of the actual version of the library
- Need for multiple versions of the same library present
- Signalling ABI compatibility of each of the multiple versions
The soname mechanism
To resolve this, Linux uses a mechanism called soname.
A foo
library version X.Y is ABI-compatible with other versions with the same value of X in a version number. Minor changes preserving compatibility increase the number Y. Major changes that break compatibility increase the number X.
The actual foo
library version X.Y exists as a file libfoo.so.x.y
. Inside the library file, a soname is recorded with value libfoo.so.x
to signal the compatibility.
When applications are built, the linker looks for the library by searching for the file libfoo.so
. A symbolic link with this name must exist, pointing to the actual library file. The linker then reads the soname from the library file and records it into the application executable file. Finally, the linker creates the application that declares dependency on the library using the soname, not a name or a file name.
When the runtime dynamic linker links an application before running, it reads the soname from application’s executable file. This soname is libfoo.so.x
. A symbolic link with this name must exist, pointing to the actual library file. This allows loading the library, regardless of the Y component of a version, because the soname does not change.
The Y component of the version number is not limited to just a single number. Additionally, some libraries encode their version in their name.
Reading soname from a file
To display the soname of a library file somelibrary
:
$ objdump -p somelibrary | grep SONAME
Replace somelibrary with the actual file name of the library you wish to examine.
2.4.3. Creating dynamic libraries with GCC
Dynamically linked libraries (shared objects) allow:
- resource conservation through code reuse
- increased security by making it easier to update the library code
Follow these steps to build and install a dynamic library from source.
Prerequisites
- You must understand the soname mechanism.
- GCC must be installed on the system.
- You must have source code for a library.
Procedure
- Change to the directory with library sources.
Compile each source file to an object file with the Position independent code option
-fPIC
:$ gcc ... -c -fPIC some_file.c ...
The object files have the same file names as the original source code files, but their extension is
.o
.Link the shared library from the object files:
$ gcc -shared -o libfoo.so.x.y -Wl,-soname,libfoo.so.x some_file.o ...
The used major version number is X and minor version number Y.
Copy the
libfoo.so.x.y
file to an appropriate location, where the system’s dynamic linker can find it. On Red Hat Enterprise Linux, the directory for libraries is/usr/lib64
:# cp libfoo.so.x.y /usr/lib64
Note that you need root permissions to manipulate files in this directory.
Create the symlink structure for soname mechanism:
# ln -s libfoo.so.x.y libfoo.so.x # ln -s libfoo.so.x libfoo.so
Additional resources
- The Linux Documentation Project — Program Library HOWTO — 3. Shared Libraries
2.4.4. Creating static libraries with GCC and ar
Creating libraries for static linking is possible through conversion of object files into a special type of archive file.
Red Hat discourages the use of static linking for security reasons. Use static linking only when necessary, especially against libraries provided by Red Hat. See Section 2.3.2, “Static and dynamic linking” for more details.
Prerequisites
- GCC and binutils must be installed on the system.
- You must understand static and dynamic linking.
- Source file(s) with functions to be shared as a library are available.
Procedure
Create intermediate object files with GCC.
$ gcc -c source_file.c ...
Append more source files if required. The resulting object files share the file name but use the
.o
file name extension.Turn the object files into a static library (archive) using the
ar
tool from thebinutils
package.$ ar rcs libfoo.a source_file.o ...
File
libfoo.a
is created.Use the
nm
command to inspect the resulting archive:$ nm libfoo.a
- Copy the static library file to the appropriate directory.
When linking against the library, GCC will automatically recognize from the
.a
file name extension that the library is an archive for static linking.$ gcc ... -lfoo ...
Additional resources
Linux manual page for ar(1):
$ man ar
2.5. Managing More Code with Make
The GNU make utility, commonly abbreviated make, is a tool for controlling the generation of executables from source files. make automatically determines which parts of a complex program have changed and need to be recompiled. make uses configuration files called Makefiles to control the way programs are built.
2.5.1. GNU make
and Makefile
overview
To create a usable form (usually executable files) from the source files of a particular project, perform several necessary steps. Record the actions and their sequence to be able to repeat them later.
Red Hat Enterprise Linux contains GNU make
, a build system designed for this purpose.
Prerequisites
- Understanding the concepts of compiling and linking
GNU make
GNU make
reads Makefiles which contain the instructions describing the build process. A Makefile contains multiple rules that describe a way to satisfy a certain condition (target) with a specific action (recipe). Rules can hierarchically depend on another rule.
Running make
without any options makes it look for a Makefile in the current directory and attempt to reach the default target. The actual Makefile file name can be one of Makefile
, makefile
, and GNUmakefile
. The default target is determined from the Makefile contents.
Makefile details
Makefiles use a relatively simple syntax for defining variables and rules, which consists of a target and a recipe. The target specifies what is the output if a rule is executed. The lines with recipes must start with the TAB character.
Typically, a Makefile contains rules for compiling source files, a rule for linking the resulting object files, and a target that serves as the entry point at the top of the hierarchy.
Consider the following Makefile
for building a C program which consists of a single file, hello.c
.
all: hello hello: hello.o gcc hello.o -o hello hello.o: hello.c gcc -c hello.c -o hello.o
This example shows that to reach the target all
, file hello
is required. To get hello
, one needs hello.o
(linked by gcc
), which in turn is created from hello.c
(compiled by gcc
).
The target all
is the default target because it is the first target that does not start with a period (.). Running make
without any arguments is then identical to running make all
, when the current directory contains this Makefile
.
Typical makefile
A more typical Makefile uses variables for generalization of the steps and adds a target "clean" - remove everything but the source files.
CC=gcc CFLAGS=-c -Wall SOURCE=hello.c OBJ=$(SOURCE:.c=.o) EXE=hello all: $(SOURCE) $(EXE) $(EXE): $(OBJ) $(CC) $(OBJ) -o $@ %.o: %.c $(CC) $(CFLAGS) $< -o $@ clean: rm -rf $(OBJ) $(EXE)
Adding more source files to such Makefile requires only adding them to the line where the SOURCE variable is defined.
Additional resources
- GNU make: Introduction — 2 An Introduction to Makefiles
2.5.2. Example: Building a C program using a Makefile
Build a sample C program using a Makefile by following the steps in this example.
Prerequisites
-
You must understand the concepts of Makefiles and
make
.
Procedure
Create a directory
hellomake
and change to this directory:$ mkdir hellomake $ cd hellomake
Create a file
hello.c
with the following contents:#include <stdio.h> int main(int argc, char *argv[]) { printf("Hello, World!\n"); return 0; }
Create a file
Makefile
with the following contents:CC=gcc CFLAGS=-c -Wall SOURCE=hello.c OBJ=$(SOURCE:.c=.o) EXE=hello all: $(SOURCE) $(EXE) $(EXE): $(OBJ) $(CC) $(OBJ) -o $@ %.o: %.c $(CC) $(CFLAGS) $< -o $@ clean: rm -rf $(OBJ) $(EXE)
ImportantThe Makefile recipe lines must start with the tab character! When copying the text above from the documentation, the cut-and-paste process may paste spaces instead of tabs. If this happens, correct the issue manually.
Run
make
:$ make gcc -c -Wall hello.c -o hello.o gcc hello.o -o hello
This creates an executable file
hello
.Run the executable file
hello
:$ ./hello Hello, World!
Run the Makefile target
clean
to remove the created files:$ make clean rm -rf hello.o hello
2.5.3. Documentation resources for make
For more information about make
, see the resources listed below.
Installed documentation
Use the
man
andinfo
tools to view manual pages and information pages installed on your system:$ man make $ info make
Online documentation
- The GNU Make Manual hosted by the Free Software Foundation