Chapter 106. Netty
Netty Component
Available as of Camel 2.3
The Netty component in Camel is a socket communication component, based on the Netty project. Netty is a NIO client server framework which enables quick and easy development of network applications such as protocol servers and clients. Netty greatly simplifies and streamlines network programming such as TCP and UDP socket server.
Tip
There is a Netty4 component that is using the newer Netty 4 which is recommend to use as this component is using the older Netty 3 library.
This camel component supports both producer and consumer endpoints.
The Netty component has several options and allows fine-grained control of a number of TCP/UDP communication parameters (buffer sizes, keepAlives, tcpNoDelay etc) and facilitates both In-Only and In-Out communication on a Camel route.
Maven users will need to add the following dependency to their
pom.xml
for this component:
<dependency> <groupId>org.apache.camel</groupId> <artifactId>camel-netty</artifactId> <version>x.x.x</version> <!-- use the same version as your Camel core version --> </dependency>
URI format
The URI scheme for a netty component is as follows
netty:tcp://localhost:99999[?options] netty:udp://remotehost:99999/[?options]
This component supports producer and consumer endpoints for both TCP and UDP.
You can append query options to the URI in the following format,
?option=value&option=value&...
Options
Name | Default Value | Description |
---|---|---|
keepAlive
|
true
|
Setting to ensure socket is not closed due to inactivity |
tcpNoDelay
|
true
|
Setting to improve TCP protocol performance |
backlog
|
Camel 2.9.6/2.10.4/2.11: Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200 , 500 or 1000 , tells the TCP stack how long the "accept" queue can be. If this option is not configured, then the backlog depends on OS setting.
|
|
broadcast
|
false
|
Setting to choose Multicast over UDP |
connectTimeout
|
10000
|
Time to wait for a socket connection to be available. Value is in millis. |
reuseAddress
|
true
|
Setting to facilitate socket multiplexing |
sync
|
true
|
Setting to set endpoint as one-way or request-response |
synchronous
|
false
|
Camel 2.10: Whether Asynchronous Routing Engine is not in use. false then the Asynchronous Routing Engine is used, true to force processing synchronous.
|
ssl
|
false
|
Setting to specify whether SSL encryption is applied to this endpoint |
sslClientCertHeaders
|
false
|
Camel 2.12: When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range. |
sendBufferSize
|
65536 bytes
|
The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes. |
receiveBufferSize
|
65536 bytes
|
The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes. |
option.XXX
|
null
|
Camel 2.11/2.10.4: Allows to configure additional netty options using "option." as prefix. For example "option.child.keepAlive=false" to set the netty option "child.keepAlive=false". See the Netty documentation for possible options that can be used. |
corePoolSize
|
10
|
The number of allocated threads at component startup. Defaults to 10. Note: This option is removed from Camel 2.9.2 onwards. As we rely on Nettys default settings. |
maxPoolSize
|
100
|
The maximum number of threads that may be allocated to this endpoint. Defaults to 100. Note: This option is removed from Camel 2.9.2 onwards. As we rely on Nettys default settings. |
disconnect
|
false
|
Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer. |
lazyChannelCreation
|
true
|
Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started. |
transferExchange
|
false
|
Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. |
disconnectOnNoReply
|
true
|
If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back. |
noReplyLogLevel
|
WARN
|
If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. Values are: FATAL, ERROR, INFO, DEBUG, OFF .
|
serverExceptionCaughtLogLevel
|
WARN
|
Camel 2.11.1: If the server (NettyConsumer) catches an exception then its logged using this logging level. |
serverClosedChannelExceptionCaughtLogLevel
|
DEBUG
|
Camel 2.11.1: If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flod of closed exceptions in the Netty server.
|
allowDefaultCodec
|
true
|
Camel 2.4: The netty component installs a default codec if both, encoder/deocder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain. |
textline
|
false
|
Camel 2.4: Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP. |
delimiter
|
LINE
|
Camel 2.4: The delimiter to use for the textline codec. Possible values are LINE and NULL .
|
decoderMaxLineLength
|
1024
|
Camel 2.4: The max line length to use for the textline codec. |
autoAppendDelimiter
|
true
|
Camel 2.4: Whether or not to auto append missing end delimiter when sending using the textline codec. |
encoding
|
null
|
Camel 2.4: The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset. |
workerCount
|
null
|
Camel 2.9: When netty works on nio mode, it uses default workerCount parameter from Netty, which is cpu_core_threads*2. User can use this operation to override the default workerCount from Netty |
sslContextParameters
|
null
|
Camel 2.9: SSL configuration using an org.apache.camel.util.jsse.SSLContextParameters instance. See Using the JSSE Configuration Utility.
|
receiveBufferSizePredictor
|
null
|
Camel 2.9: Configures the buffer size predictor. See details at Jetty documentation and this mail thread. |
requestTimeout
|
0
|
Camel 2.11.1: Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milliseconds. The requestTimeout option uses Netty's ReadTimeoutHandler to trigger the timeout.
|
needClientAuth
|
false
|
Camel 2.11: Configures whether the server needs client authentication when using SSL. |
orderedThreadPoolExecutor
|
true
|
Camel 2.10.2: Whether to use ordered thread pool, to ensure events are processed orderly on the same channel. See details at the netty javadoc of org.jboss.netty.handler.execution.OrderedMemoryAwareThreadPoolExecutor for more details.
|
maximumPoolSize
|
16
|
Camel 2.10.2: The core pool size for the ordered thread pool, if its in use. |
producerPoolEnabled
|
true
|
Camel 2.10.4/Camel 2.11: Producer only. Whether producer pool is enabled or not. Important: Do not turn this off, as the pooling is needed for handling concurrency and reliable request/reply. |
producerPoolMaxActive
|
-1
|
Camel 2.10.3: Producer only. Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit. |
producerPoolMinIdle
|
0
|
Camel 2.10.3: Producer only. Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects. |
producerPoolMaxIdle
|
100
|
Camel 2.10.3: Producer only. Sets the cap on the number of "idle" instances in the pool. |
producerPoolMinEvictableIdle
|
30000
|
Camel 2.10.3: Producer only. Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor. |
bootstrapConfiguration
|
null
|
Camel 2.12: Consumer only. Allows to configure the Netty ServerBootstrap options using a org.apache.camel.component.netty.NettyServerBootstrapConfiguration instance. This can be used to reuse the same configuration for multiple consumers, to align their configuration more easily.
|
bossPoll
|
null
|
Camel 2.12: To use a explicit org.jboss.netty.channel.socket.nio.BossPool as the boss thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own boss pool with 1 core thread.
|
workerPool
|
null
|
Camel 2.12: To use a explicit org.jboss.netty.channel.socket.nio.WorkerPool as the worker thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own worker pool with 2 x cpu count core threads.
|
networkInterface
|
null
|
Camel 2.12: Consumer only. When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.
|
udpConnectionlessSending
|
false
|
Camel 2.15: Producer only. This option supports connectionless UDP sending, which is genuine fire-and-forget. A UDP send attempt receives the
PortUnreachableException exception, if no one is listening on the receiving port.
|
clientMode
|
false
|
Camel 2.15: Consumer only. If clientMode is true , the Netty consumer connects to the address as a TCP client.
|
Registry based Options
Codec Handlers and SSL Keystores can be enlisted in the Registry, such as in the Spring XML file. The values that could be passed in, are the following:
Name | Description |
---|---|
passphrase
|
password setting to use in order to encrypt/decrypt payloads sent using SSH |
keyStoreFormat
|
keystore format to be used for payload encryption. Defaults to "JKS" if not set |
securityProvider
|
Security provider to be used for payload encryption. Defaults to "SunX509" if not set. |
keyStoreFile
|
deprecated: Client side certificate keystore to be used for encryption |
trustStoreFile
|
deprecated: Server side certificate keystore to be used for encryption |
keyStoreResource
|
Camel 2.11.1: Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with "classpath:" , "file:" , or "http:" to load the resource from different systems.
|
trustStoreResource
|
Camel 2.11.1: Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with "classpath:" , "file:" , or "http:" to load the resource from different systems.
|
sslHandler
|
Reference to a class that could be used to return an SSL Handler |
encoder
|
A custom ChannelHandler class that can be used to perform special marshalling of outbound payloads. Must override org.jboss.netty.channel.ChannelDownStreamHandler .
|
encorders
|
A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup. |
decoder
|
A custom ChannelHandler class that can be used to perform special marshalling of inbound payloads. Must override org.jboss.netty.channel.ChannelUpStreamHandler . With no decoder defined Netty will default to serialized Java objects via the ObjectDecoder class; if a different format is expected then a decoder must be specified.
|
decoders
|
A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup. |
Important: Read below about using non shareable encoders/decoders.
Sending Messages to/from a Netty endpoint
Netty Producer
In Producer mode, the component provides the ability to send payloads to a socket endpoint using either TCP or UDP protocols (with optional SSL support).
The producer mode supports both one-way and request-response based operations.
Netty Consumer
In Consumer mode, the component provides the ability to:
- listen on a specified socket using either TCP or UDP protocols (with optional SSL support),
- receive requests on the socket using text/xml, binary and serialized object based payloads and
- send them along on a route as message exchanges.
The consumer mode supports both one-way and request-response based operations.
Headers
The following headers are filled for the exchanges created by the Netty consumer:
Header Key | Class | Description |
---|---|---|
NettyConstants.NETTY_CHANNEL_HANDLER_CONTEXT / CamelNettyChannelHandlerContext | org.jboss.netty.channel.ChannelHandlerContext | ChannelHandlerContext instance associated with the connection received by Netty. |
NettyConstants.NETTY_MESSAGE_EVENT / CamelNettyMessageEvent | org.jboss.netty.channel.MessageEvent | MessageEvent instance associated with the connection received by Netty. |
NettyConstants.NETTY_REMOTE_ADDRESS / CamelNettyRemoteAddress | java.net.SocketAddress | Remote address of the incoming socket connection. |
NettyConstants.NETTY_LOCAL_ADDRESS / CamelNettyLocalAddress | java.net.SocketAddress | Local address of the incoming socket connection. |
A UDP Netty endpoint using Request-Reply and serialized object payload
RouteBuilder builder = new RouteBuilder() { public void configure() { from("netty:udp://localhost:5155?sync=true") .process(new Processor() { public void process(Exchange exchange) throws Exception { Poetry poetry = (Poetry) exchange.getIn().getBody(); poetry.setPoet("Dr. Sarojini Naidu"); exchange.getOut().setBody(poetry); } } } };
A TCP based Netty consumer endpoint using One-way communication
RouteBuilder builder = new RouteBuilder() { public void configure() { from("netty:tcp://localhost:5150") .to("mock:result"); } };
An SSL/TCP based Netty consumer endpoint using Request-Reply communication
Using the JSSE Configuration Utility
As of Camel 2.9, the Netty component supports SSL/TLS configuration through the http://camel.apache.org/camel-configuration-utilities.html. This utility greatly decreases the amount of component specific code you need to write and is configurable at the endpoint and component levels. The following examples demonstrate how to use the utility with the Netty component.
Programmatic configuration of the component
KeyStoreParameters ksp = new KeyStoreParameters(); ksp.setResource("/users/home/server/keystore.jks"); ksp.setPassword("keystorePassword"); KeyManagersParameters kmp = new KeyManagersParameters(); kmp.setKeyStore(ksp); kmp.setKeyPassword("keyPassword"); SSLContextParameters scp = new SSLContextParameters(); scp.setKeyManagers(kmp); NettyComponent nettyComponent = getContext().getComponent("netty", NettyComponent.class); nettyComponent.setSslContextParameters(scp);
Spring DSL based configuration of endpoint
... <camel:sslContextParameters id="sslContextParameters"> <camel:keyManagers keyPassword="keyPassword"> <camel:keyStore resource="/users/home/server/keystore.jks" password="keystorePassword"/> </camel:keyManagers> </camel:sslContextParameters>... ... <to uri="netty:tcp://localhost:5150?sync=true&ssl=true&sslContextParameters=#sslContextParameters"/> ...
Using Basic SSL/TLS configuration on the Jetty Component
JndiRegistry registry = new JndiRegistry(createJndiContext()); registry.bind("password", "changeit"); registry.bind("ksf", new File("src/test/resources/keystore.jks")); registry.bind("tsf", new File("src/test/resources/keystore.jks")); context.createRegistry(registry); context.addRoutes(new RouteBuilder() { public void configure() { String netty_ssl_endpoint = "netty:tcp://localhost:5150?sync=true&ssl=true&passphrase=#password" + "&keyStoreFile=#ksf&trustStoreFile=#tsf"; String return_string = "When You Go Home, Tell Them Of Us And Say," + "For Your Tomorrow, We Gave Our Today."; from(netty_ssl_endpoint) .process(new Processor() { public void process(Exchange exchange) throws Exception { exchange.getOut().setBody(return_string); } } } });
Getting access to SSLSession and the client certificate
Available as of Camel 2.12
You can get access to the
javax.net.ssl.SSLSession
if you eg need to get details about the client certificate. When ssl=true
then the Netty component will store the SSLSession
as a header on the Camel Message, as shown below:
SSLSession session = exchange.getIn().getHeader(NettyConstants.NETTY_SSL_SESSION, SSLSession.class); // get the first certificate which is client certificate javax.security.cert.X509Certificate cert = session.getPeerCertificateChain()[0]; Principal principal = cert.getSubjectDN();
Remember to set
needClientAuth=true
to authenticate the client, otherwise SSLSession
cannot access information about the client certificate, and you may get an exception javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
. You may also get this exception if the client certificate is expired or not valid etc.
Tip
The option
sslClientCertHeaders
can be set to true
, which then enriches the Camel Message with headers having details about the client certificate. For example the subject name is readily available in the header CamelNettySSLClientCertSubjectName
.
Using Multiple Codecs
In certain cases it may be necessary to add chains of encoders and decoders to the netty pipeline. To add multpile codecs to a camel netty endpoint the 'encoders' and 'decoders' uri parameters should be used. Like the 'encoder' and 'decoder' parameters they are used to supply references (to lists of ChannelUpstreamHandlers and ChannelDownstreamHandlers) that should be added to the pipeline. Note that if encoders is specified then the encoder param will be ignored, similarly for decoders and the decoder param.
Important
Read further above about using non shareable encoders/decoders.
The lists of codecs need to be added to the Camel's registry so they can be resolved when the endpoint is created.
ChannelHandlerFactory lengthDecoder = ChannelHandlerFactories.newLengthFieldBasedFrameDecoder(1048576, 0, 4, 0, 4); StringDecoder stringDecoder = new StringDecoder(); registry.bind("length-decoder", lengthDecoder); registry.bind("string-decoder", stringDecoder); LengthFieldPrepender lengthEncoder = new LengthFieldPrepender(4); StringEncoder stringEncoder = new StringEncoder(); registry.bind("length-encoder", lengthEncoder); registry.bind("string-encoder", stringEncoder); List<ChannelHandler> decoders = new ArrayList<ChannelHandler>(); decoders.add(lengthDecoder); decoders.add(stringDecoder); List<ChannelHandler> encoders = new ArrayList<ChannelHandler>(); encoders.add(lengthEncoder); encoders.add(stringEncoder); registry.bind("encoders", encoders); registry.bind("decoders", decoders);
Spring's native collections support can be used to specify the codec lists in an application context
<util:list id="decoders" list-class="java.util.LinkedList"> <bean class="org.apache.camel.component.netty.ChannelHandlerFactories" factory-method="newLengthFieldBasedFrameDecoder"> <constructor-arg value="1048576"/> <constructor-arg value="0"/> <constructor-arg value="4"/> <constructor-arg value="0"/> <constructor-arg value="4"/> </bean> <bean class="org.jboss.netty.handler.codec.string.StringDecoder"/> </util:list> <util:list id="encoders" list-class="java.util.LinkedList"> <bean class="org.jboss.netty.handler.codec.frame.LengthFieldPrepender"> <constructor-arg value="4"/> </bean> <bean class="org.jboss.netty.handler.codec.string.StringEncoder"/> </util:list> <bean id="length-encoder" class="org.jboss.netty.handler.codec.frame.LengthFieldPrepender"> <constructor-arg value="4"/> </bean> <bean id="string-encoder" class="org.jboss.netty.handler.codec.string.StringEncoder"/> <bean id="length-decoder" class="org.apache.camel.component.netty.ChannelHandlerFactories" factory-method="newLengthFieldBasedFrameDecoder"> <constructor-arg value="1048576"/> <constructor-arg value="0"/> <constructor-arg value="4"/> <constructor-arg value="0"/> <constructor-arg value="4"/> </bean> <bean id="string-decoder" class="org.jboss.netty.handler.codec.string.StringDecoder"/> </beans>
The bean names can then be used in netty endpoint definitions either as a comma separated list or contained in a List e.g.
from("direct:multiple-codec").to("netty:tcp://localhost:{{port}}?encoders=#encoders&sync=false"); from("netty:tcp://localhost:{{port}}?decoders=#length-decoder,#string-decoder&sync=false").to("mock:multiple-codec"); } }; } }
or via spring.
<camelContext id="multiple-netty-codecs-context" xmlns="http://camel.apache.org/schema/spring"> <route> <from uri="direct:multiple-codec"/> <to uri="netty:tcp://localhost:5150?encoders=#encoders&ync=false"/> </route> <route> <from uri="netty:tcp://localhost:5150?decoders=#length-decoder,#string-decoder&ync=false"/> <to uri="mock:multiple-codec"/> </route> </camelContext>
Closing Channel When Complete
When acting as a server you sometimes want to close the channel when, for example, a client conversion is finished. You can do this by simply setting the endpoint option
disconnect=true
.
However you can also instruct Camel on a per message basis as follows. To instruct Camel to close the channel, you should add a header with the key
CamelNettyCloseChannelWhenComplete
set to a boolean true
value. For instance, the example below will close the channel after it has written the bye message back to the client:
from("netty:tcp://localhost:8080").process(new Processor() { public void process(Exchange exchange) throws Exception { String body = exchange.getIn().getBody(String.class); exchange.getOut().setBody("Bye " + body); // some condition which determines if we should close if (close) { exchange.getOut().setHeader(NettyConstants.NETTY_CLOSE_CHANNEL_WHEN_COMPLETE, true); } } });
Adding custom channel pipeline factories to gain complete control over a created pipeline
Available as of Camel 2.5
Custom channel pipelines provide complete control to the user over the handler/interceptor chain by inserting custom handler(s), encoder(s) & decoders without having to specify them in the Netty Endpoint URL in a very simple way.
In order to add a custom pipeline, a custom channel pipeline factory must be created and registered with the context via the context registry (JNDIRegistry,or the camel-spring ApplicationContextRegistry etc).
A custom pipeline factory must be constructed as follows
- A Producer linked channel pipeline factory must extend the abstract class
ClientPipelineFactory
. - A Consumer linked channel pipeline factory must extend the abstract class
ServerPipelineFactory
. - The classes should override the getPipeline() method in order to insert custom handler(s), encoder(s) and decoder(s). Not overriding the getPipeline() method creates a pipeline with no handlers, encoders or decoders wired to the pipeline.
The example below shows how ServerChannel Pipeline factory may be created
Using custom pipeline factory
public class SampleServerChannelPipelineFactory extends ServerPipelineFactory { private int maxLineSize = 1024; public ChannelPipeline getPipeline() throws Exception { ChannelPipeline channelPipeline = Channels.pipeline(); channelPipeline.addLast("encoder-SD", new StringEncoder(CharsetUtil.UTF_8)); channelPipeline.addLast("decoder-DELIM", new DelimiterBasedFrameDecoder(maxLineSize, true, Delimiters.lineDelimiter())); channelPipeline.addLast("decoder-SD", new StringDecoder(CharsetUtil.UTF_8)); // here we add the default Camel ServerChannelHandler for the consumer, to allow Camel to route the message etc. channelPipeline.addLast("handler", new ServerChannelHandler(consumer)); return channelPipeline; } }
The custom channel pipeline factory can then be added to the registry and instantiated/utilized on a camel route in the following way
Registry registry = camelContext.getRegistry(); serverPipelineFactory = new TestServerChannelPipelineFactory(); registry.bind("spf", serverPipelineFactory); context.addRoutes(new RouteBuilder() { public void configure() { String netty_ssl_endpoint = "netty:tcp://localhost:5150?serverPipelineFactory=#spf" String return_string = "When You Go Home, Tell Them Of Us And Say," + "For Your Tomorrow, We Gave Our Today."; from(netty_ssl_endpoint) .process(new Processor() { public void process(Exchange exchange) throws Exception { exchange.getOut().setBody(return_string); } } } });
Reusing Netty boss and worker thread pools
Available as of Camel 2.12
Netty has two kind of thread pools: boss and worker. By default each Netty consumer and producer has their private thread pools. If you want to reuse these thread pools among multiple consumers or producers then the thread pools must be created and enlisted in the Registry.
For example using Spring XML we can create a shared worker thread pool using the
NettyWorkerPoolBuilder
with 2 worker threads as shown below:
<!-- use the worker pool builder to create to help create the shared thread pool --> <bean id="poolBuilder" class="org.apache.camel.component.netty.NettyWorkerPoolBuilder"> <property name="workerCount" value="2"/> </bean> <!-- the shared worker thread pool --> <bean id="sharedPool" class="org.jboss.netty.channel.socket.nio.WorkerPool" factory-bean="poolBuilder" factory-method="build" destroy-method="shutdown"> </bean>
Tip
For boss thread pool there is a
org.apache.camel.component.netty.NettyServerBossPoolBuilder
builder for Netty consumers, and a org.apache.camel.component.netty.NettyClientBossPoolBuilder
for the Netty produces.
Then in the Camel routes we can refer to this worker pools by configuring the
workerPool
option in the URI as shown below:
<route> <from uri="netty:tcp://localhost:5021?textline=true&ync=true&orkerPool=#sharedPool&rderedThreadPoolExecutor=false"/> <to uri="log:result"/> ... </route>
And if we have another route we can refer to the shared worker pool:
<route> <from uri="netty:tcp://localhost:5022?textline=true&ync=true&orkerPool=#sharedPool&rderedThreadPoolExecutor=false"/> <to uri="log:result"/> ... </route>
... and so forth.