SupportConsoleDevelopersStart a trialContact

Chapter 5. The WS-Policy Framework

Abstract

This chapter provides an introduction to the basic concepts of the WS-Policy framework, defining policy subjects and policy assertions, and explaining how policy assertions can be combined to make policy expressions.

5.1. Introduction to WS-Policy

Overview

The WS-Policy specification provides a general framework for applying policies that modify the semantics of connections and communications at runtime in a Web services application. Apache CXF security uses the WS-Policy framework to configure message protection and authentication requirements.

Policies and policy references

The simplest way to specify a policy is to embed it directly where you want to apply it. For example, to associate a policy with a specific port in the WSDL contract, you can specify it as follows: 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:service name="PingService10">
    <wsdl:port name="UserNameOverTransport_IPingService" binding="BindingName">
      <wsp:Policy>
        <!-- Policy expression comes here! -->
      </wsp:Policy>
      <soap:address location="SOAPAddress"/>
    </wsdl:port>
  </wsdl:service>
</wsdl:definitions>
An alternative way to specify a policy is to insert a policy reference element, wsp:PolicyReference, at the point where you want to apply the policy and then insert the policy element, wsp:Policy, at some other point in the XML file. For example, to associate a policy with a specific port using a policy reference, you could use a configuration like the following: 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:service name="PingService10">
    <wsdl:port name="UserNameOverTransport_IPingService" binding="BindingName">
 <wsp:PolicyReference URI="#PolicyID"/>
      <soap:address location="SOAPAddress"/>
    </wsdl:port>
  </wsdl:service>
  ...
  <wsp:Policy wsu:Id="PolicyID">
    <!-- Policy expression comes here ... -->
  </wsp:Policy>
</wsdl:definitions>
Where the policy reference, wsp:PolicyReference, locates the referenced policy using the ID, PolicyID (note the addition of the # prefix character in the URI attribute). The policy itself, wsp:Policy, must be identified by adding the attribute, wsu:Id="PolicyID".

Policy subjects

The entities with which policies are associated are called policy subjects. For example, you can associate a policy with an endpoint, in which case the endpoint is the policy subject. It is possible to associate multiple policies with any given policy subject. The WS-Policy framework supports the following kinds of policy subject:

Service policy subject

To associate a policy with a service, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of the following WSDL 1.1 element:
  • wsdl:service—apply the policy to all of the ports (endpoints) offered by this service.

Endpoint policy subject

To associate a policy with an endpoint, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of any of the following WSDL 1.1 elements:
  • wsdl:portType—apply the policy to all of the ports (endpoints) that use this port type.
  • wsdl:binding—apply the policy to all of the ports that use this binding.
  • wsdl:port—apply the policy to this endpoint only.
For example, you can associate a policy with an endpoint binding as follows (using a policy reference): 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:binding name="EndpointBinding" type="i0:IPingService">
    <wsp:PolicyReference URI="#PolicyID"/>
    ...
  </wsdl:binding>
  ...
  <wsp:Policy wsu:Id="PolicyID"> ... </wsp:Policy>
  ...
</wsdl:definitions>

Operation policy subject

To associate a policy with an operation, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of any of the following WSDL 1.1 elements:
  • wsdl:portType/wsdl:operation
  • wsdl:binding/wsdl:operation
For example, you can associate a policy with an operation in a binding as follows (using a policy reference): 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:binding name="EndpointBinding" type="i0:IPingService">
    <wsdl:operation name="Ping">
      <wsp:PolicyReference URI="#PolicyID"/>
      <soap:operation soapAction="http://xmlsoap.org/Ping" style="document"/>
      <wsdl:input name="PingRequest"> ... </wsdl:input>
      <wsdl:output name="PingResponse"> ... </wsdl:output>
    </wsdl:operation>
    ...
  </wsdl:binding>
  ...
  <wsp:Policy wsu:Id="PolicyID"> ... </wsp:Policy>
  ...
</wsdl:definitions>

Message policy subject

To associate a policy with a message, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of any of the following WSDL 1.1 elements:
  • wsdl:message
  • wsdl:portType/wsdl:operation/wsdl:input
  • wsdl:portType/wsdl:operation/wsdl:output
  • wsdl:portType/wsdl:operation/wsdl:fault
  • wsdl:binding/wsdl:operation/wsdl:input
  • wsdl:binding/wsdl:operation/wsdl:output
  • wsdl:binding/wsdl:operation/wsdl:fault
For example, you can associate a policy with a message in a binding as follows (using a policy reference): 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:binding name="EndpointBinding" type="i0:IPingService">
    <wsdl:operation name="Ping">
      <soap:operation soapAction="http://xmlsoap.org/Ping" style="document"/>
      <wsdl:input name="PingRequest">
        <wsp:PolicyReference URI="#PolicyID"/>
        <soap:body use="literal"/>
      </wsdl:input>
      <wsdl:output name="PingResponse"> ... </wsdl:output>
    </wsdl:operation>
    ...
  </wsdl:binding>
  ...
  <wsp:Policy wsu:Id="PolicyID"> ... </wsp:Policy>
  ...
</wsdl:definitions>
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.