Chapter 76. CXF-RS Component

You can also configure the CXF REST endpoint through the spring configuration. Since there are lots of difference between the CXF REST client and CXF REST Server, we provide different configuration for them. Please check out the schema file and CXF JAX-RS documentation for more information.

This binding style can be activated by setting the bindingStyle parameter in the consumer endpoint to value SimpleConsumer:

  from("cxfrs:bean:rsServer?bindingStyle=SimpleConsumer")
    .to("log:TEST?showAll=true");

Below is a list of method signatures along with the expected result from the Simple binding.

public Response doAction(BusinessObject request);
Request payload is placed in IN message body, replacing the original MessageContentsList.

public Response doAction(BusinessObject request, @HeaderParam("abcd") String abcd, @QueryParam("defg") String defg); Request payload placed in IN message body, replacing the original MessageContentsList. Both request params mapped as IN message headers with names abcd and defg.

public Response doAction(@HeaderParam("abcd") String abcd, @QueryParam("defg") String defg); Both request params mapped as IN message headers with names abcd and defg. The original MessageContentsList is preserved, even though it only contains the 2 parameters.

public Response doAction(@Multipart(value="body1") BusinessObject request, @Multipart(value="body2") BusinessObject request2); The first parameter is transferred as a header with name body1, and the second one is mapped as header body2. The original MessageContentsList is preserved as the IN message body.

public Response doAction(InputStream abcd); The InputStream is unwrapped from the MessageContentsList and preserved as the IN message body.

public Response doAction(DataHandler abcd); The DataHandler is unwrapped from the MessageContentsList and preserved as the IN message body.

Given a JAX-RS resource class with this method:

    @POST @Path("/customers/{type}")
    public Response newCustomer(Customer customer, @PathParam("type") String type, @QueryParam("active") @DefaultValue("true") boolean active) {
        return null;
    }

Serviced by the following route:

    from("cxfrs:bean:rsServer?bindingStyle=SimpleConsumer")
        .recipientList(simple("direct:${header.operationName}"));

    from("direct:newCustomer")
        .log("Request: type=${header.type}, active=${header.active}, customerData=${body}");

The following HTTP request with XML payload (given that the Customer DTO is JAXB-annotated):

POST /customers/gold?active=true

Payload:
<Customer>
  <fullName>Raul Kripalani</fullName>
  <country>Spain</country>
  <project>Apache Camel</project>
</Customer>

Will print the message:

Request: type=gold, active=true, customerData=<Customer.toString() representation>

For more examples on how to process requests and write responses can be found here.

You can use the following snippet in your applicationcontext if you want to configure anything special. If you only want to activate the camel transport you do not have to do anything in your application context. As soon as you include the camel-cxf-transport jar (or camel-cxf.jar if your camel version is less than 2.7.x) in your app, cxf will scan the jar and load a CamelTransportFactory for you.

<!-- you don't need to specify the CamelTransportFactory configuration as it is auto load by CXF bus -->
<bean class="org.apache.camel.component.cxf.transport.CamelTransportFactory">
  <property name="bus" ref="cxf" />
  <property name="camelContext" ref="camelContext" />
  <!-- checkException new added in Camel 2.1 and Camel 1.6.2 -->
  <!-- If checkException is true , CamelDestination will check the outMessage's
     exception and set it into camel exchange. You can also override this value
     in CamelDestination's configuration. The default value is false.
     This option should be set true when you want to leverage the camel's error
     handler to deal with fault message -->
  <property name="checkException" value="true" />
  <property name="transportIds">
    <list>
      <value>http://cxf.apache.org/transports/camel</value>
    </list>
  </property>
</bean>

Camel transport provides a setContext method that you could use to set the Camel context into the transport factory. If you want this factory take effect, you need to register the factory into the CXF bus. Here is a full example for you.

import org.apache.cxf.Bus;
import org.apache.cxf.BusFactory;
import org.apache.cxf.transport.ConduitInitiatorManager;
import org.apache.cxf.transport.DestinationFactoryManager;
...

BusFactory bf = BusFactory.newInstance();
Bus bus = bf.createBus();
CamelTransportFactory camelTransportFactory = new CamelTransportFactory();
// set up the CamelContext which will be use by the CamelTransportFactory
camelTransportFactory.setCamelContext(context)
// if you are using CXF higher then 2.4.x the
camelTransportFactory.setBus(bus);

// if you are lower CXF, you need to register the ConduitInitiatorManager and DestinationFactoryManager like below
// register the conduit initiator
ConduitInitiatorManager cim = bus.getExtension(ConduitInitiatorManager.class);
cim.registerConduitInitiator(CamelTransportFactory.TRANSPORT_ID, camelTransportFactory);
// register the destination factory
DestinationFactoryManager dfm = bus.getExtension(DestinationFactoryManager.class);
dfm.registerDestinationFactory(CamelTransportFactory.TRANSPORT_ID, camelTransportFactory);
// set or bus as the default bus for cxf
BusFactory.setDefaultBus(bus);

The elements used to configure an Camel transport endpoint are defined in the namespace http://cxf.apache.org/transports/camel. It is commonly referred to using the prefix camel. In order to use the Camel transport configuration elements, you will need to add the lines shown below to the beans element of your endpoint’s configuration file. In addition, you will need to add the configuration elements' namespace to the xsi:schemaLocation attribute.

Adding the Configuration Namespace

<beans ...
       xmlns:camel="http://cxf.apache.org/transports/camel
       ...
       xsi:schemaLocation="...
                           http://cxf.apache.org/transports/camel
                           http://cxf.apache.org/transports/camel.xsd
                          ...>

You configure an Camel transport server endpoint using the camel:destination element and its children. The camel:destination element takes a single attribute, name, that specifies the WSDL port element that corresponds to the endpoint. The value for the name attribute takes the form portQName`.camel-destination`. The example below shows the camel:destination element that would be used to add configuration for an endpoint that was specified by the WSDL fragment <port binding="widgetSOAPBinding" name="widgetSOAPPort"> if the endpoint’s target namespace was http://widgets.widgetvendor.net.

camel:destination Element

...
  <camel:destination name="{http://widgets/widgetvendor.net}widgetSOAPPort.http-destination>
    <camelContext id="context" xmlns="http://activemq.apache.org/camel/schema/spring">
         <route>
           <from uri="direct:EndpointC" />
           <to uri="direct:EndpointD" />
         </route>
     </camelContext>
  </camel:destination>

  <!-- new added feature since Camel 2.11.x
  <camel:destination name="{http://widgets/widgetvendor.net}widgetSOAPPort.camel-destination" camelContextId="context" />

...

The camel:destination element for Spring has a number of child elements that specify configuration information. They are described below.

Element

Description

camel-spring:camelContext

You can specify the camel context in the camel destination

camel:camelContextRef

The camel context id which you want inject into the camel destination

You configure a Camel transport client using the camel:conduit element and its children. The camel:conduit element takes a single attribute, name, that specifies the WSDL port element that corresponds to the endpoint. The value for the name attribute takes the form portQName`.camel-conduit`. For example, the code below shows the camel:conduit element that would be used to add configuration for an endpoint that was specified by the WSDL fragment <port binding="widgetSOAPBinding" name="widgetSOAPPort"> if the endpoint’s target namespace was http://widgets.widgetvendor.net.

http-conf:conduit Element

...
  <camelContext id="conduit_context" xmlns="http://activemq.apache.org/camel/schema/spring">
       <route>
           <from uri="direct:EndpointA" />
           <to uri="direct:EndpointB" />
       </route>
   </camelContext>

  <camel:conduit name="{http://widgets/widgetvendor.net}widgetSOAPPort.camel-conduit">
     <camel:camelContextRef>conduit_context</camel:camelContextRef>
  </camel:conduit>

  <!-- new added feature since Camel 2.11.x
  <camel:conduit name="{http://widgets/widgetvendor.net}widgetSOAPPort.camel-conduit" camelContextId="conduit_context" />


  <camel:conduit name="*.camel-conduit">
  <!-- you can also using the wild card to specify the camel-conduit that you want to configure -->
    ...
  </camel:conduit>
...

The camel:conduit element has a number of child elements that specify configuration information. They are described below.

Element

Description

camel-spring:camelContext

You can specify the camel context in the camel conduit

camel:camelContextRef

The camel context id which you want inject into the camel conduit