Chapter 5. AMQP Component

configuration (advanced)

To use a shared JMS configuration

JmsConfiguration

acceptMessagesWhile Stopping (consumer)

Specifies whether the consumer accept messages while it is stopping. You may consider enabling this option, if you start and stop JMS routes at runtime, while there are still messages enqueued on the queue. If this option is false, and you stop the JMS route, then messages may be rejected, and the JMS broker would have to attempt redeliveries, which yet again may be rejected, and eventually the message may be moved at a dead letter queue on the JMS broker. To avoid this its recommended to enable this option.

false

boolean

allowReplyManagerQuick Stop (consumer)

Whether the DefaultMessageListenerContainer used in the reply managers for request-reply messaging allow the DefaultMessageListenerContainer.runningAllowed flag to quick stop in case JmsConfiguration#isAcceptMessagesWhileStopping is enabled, and org.apache.camel.CamelContext is currently being stopped. This quick stop ability is enabled by default in the regular JMS consumers but to enable for reply managers you must enable this flag.

false

boolean

acknowledgementMode (consumer)

The JMS acknowledgement mode defined as an Integer. Allows you to set vendor-specific extensions to the acknowledgment mode.For the regular modes, it is preferable to use the acknowledgementModeName instead.

int

eagerLoadingOf Properties (consumer)

Enables eager loading of JMS properties as soon as a message is loaded which generally is inefficient as the JMS properties may not be required but sometimes can catch early any issues with the underlying JMS provider and the use of JMS properties

false

boolean

acknowledgementModeName (consumer)

The JMS acknowledgement name, which is one of: SESSION_TRANSACTED, CLIENT_ACKNOWLEDGE, AUTO_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE

AUTO_ ACKNOWLEDGE

String

autoStartup (consumer)

Specifies whether the consumer container should auto-startup.

true

boolean

cacheLevel (consumer)

Sets the cache level by ID for the underlying JMS resources. See cacheLevelName option for more details.

int

cacheLevelName (consumer)

Sets the cache level by name for the underlying JMS resources. Possible values are: CACHE_AUTO, CACHE_CONNECTION, CACHE_CONSUMER, CACHE_NONE, and CACHE_SESSION. The default setting is CACHE_AUTO. See the Spring documentation and Transactions Cache Levels for more information.

CACHE_AUTO

String

replyToCacheLevelName (producer)

Sets the cache level by name for the reply consumer when doing request/reply over JMS. This option only applies when using fixed reply queues (not temporary). Camel will by default use: CACHE_CONSUMER for exclusive or shared w/ replyToSelectorName. And CACHE_SESSION for shared without replyToSelectorName. Some JMS brokers such as IBM WebSphere may require to set the replyToCacheLevelName=CACHE_NONE to work. Note: If using temporary queues then CACHE_NONE is not allowed, and you must use a higher value such as CACHE_CONSUMER or CACHE_SESSION.

String

clientId (common)

Sets the JMS client ID to use. Note that this value, if specified, must be unique and can only be used by a single JMS connection instance. It is typically only required for durable topic subscriptions. If using Apache ActiveMQ you may prefer to use Virtual Topics instead.

String

concurrentConsumers (consumer)

Specifies the default number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.

1

int

replyToConcurrent Consumers (producer)

Specifies the default number of concurrent consumers when doing request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

1

int

connectionFactory (common)

The connection factory to be use. A connection factory must be configured either on the component or endpoint.

ConnectionFactory

username (security)

Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

String

password (security)

Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

String

deliveryPersistent (producer)

Specifies whether persistent delivery is used by default.

true

boolean

deliveryMode (producer)

Specifies the delivery mode to be used. Possibles values are those defined by javax.jms.DeliveryMode. NON_PERSISTENT = 1 and PERSISTENT = 2.

Integer

durableSubscriptionName (common)

The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.

String

exceptionListener (advanced)

Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions.

ExceptionListener

errorHandler (advanced)

Specifies a org.springframework.util.ErrorHandler to be invoked in case of any uncaught exceptions thrown while processing a Message. By default these exceptions will be logged at the WARN level, if no errorHandler has been configured. You can configure logging level and whether stack traces should be logged using errorHandlerLoggingLevel and errorHandlerLogStackTrace options. This makes it much easier to configure, than having to code a custom errorHandler.

ErrorHandler

errorHandlerLogging Level (logging)

Allows to configure the default errorHandler logging level for logging uncaught exceptions.

WARN

LoggingLevel

errorHandlerLogStack Trace (logging)

Allows to control whether stacktraces should be logged or not, by the default errorHandler.

true

boolean

explicitQosEnabled (producer)

Set if the deliveryMode, priority or timeToLive qualities of service should be used when sending messages. This option is based on Spring’s JmsTemplate. The deliveryMode, priority and timeToLive options are applied to the current endpoint. This contrasts with the preserveMessageQos option, which operates at message granularity, reading QoS properties exclusively from the Camel In message headers.

false

boolean

exposeListenerSession (consumer)

Specifies whether the listener session should be exposed when consuming messages.

false

boolean

idleTaskExecutionLimit (advanced)

Specifies the limit for idle executions of a receive task, not having received any message within its execution. If this limit is reached, the task will shut down and leave receiving to other executing tasks (in the case of dynamic scheduling; see the maxConcurrentConsumers setting). There is additional doc available from Spring.

1

int

idleConsumerLimit (advanced)

Specify the limit for the number of consumers that are allowed to be idle at any given time.

1

int

maxConcurrentConsumers (consumer)

Specifies the maximum number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToMaxConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.

int

replyToMaxConcurrent Consumers (producer)

Specifies the maximum number of concurrent consumers when using request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

int

replyOnTimeoutToMax ConcurrentConsumers (producer)

Specifies the maximum number of concurrent consumers for continue routing when timeout occurred when using request/reply over JMS.

1

int

maxMessagesPerTask (advanced)

The number of messages per task. -1 is unlimited. If you use a range for concurrent consumers (eg min max), then this option can be used to set a value to eg 100 to control how fast the consumers will shrink when less work is required.

-1

int

messageConverter (advanced)

To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message.

MessageConverter

mapJmsMessage (advanced)

Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.

true

boolean

messageIdEnabled (advanced)

When sending, specifies whether message IDs should be added. This is just an hint to the JMS broker.If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value

true

boolean

messageTimestampEnabled (advanced)

Specifies whether timestamps should be enabled by default on sending messages. This is just an hint to the JMS broker.If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint the timestamp must be set to its normal value

true

boolean

alwaysCopyMessage (producer)

If true, Camel will always make a JMS message copy of the message when it is passed to the producer for sending. Copying the message is needed in some situations, such as when a replyToDestinationSelectorName is set (incidentally, Camel will set the alwaysCopyMessage option to true, if a replyToDestinationSelectorName is set)

false

boolean

useMessageIDAs CorrelationID (advanced)

Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.

false

boolean

priority (producer)

Values greater than 1 specify the message priority when sending (where 0 is the lowest priority and 9 is the highest). The explicitQosEnabled option must also be enabled in order for this option to have any effect.

4

int

pubSubNoLocal (advanced)

Specifies whether to inhibit the delivery of messages published by its own connection.

false

boolean

receiveTimeout (advanced)

The timeout for receiving messages (in milliseconds).

1000

long

recoveryInterval (advanced)

Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.

5000

long

taskExecutor (consumer)

Allows you to specify a custom task executor for consuming messages.

TaskExecutor

deliveryDelay (producer)

Sets delivery delay to use for send calls for JMS. This option requires JMS 2.0 compliant broker.

-1

long

timeToLive (producer)

When sending messages, specifies the time-to-live of the message (in milliseconds).

-1

long

transacted (transaction)

Specifies whether to use transacted mode

false

boolean

lazyCreateTransaction Manager (transaction)

If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.

true

boolean

transactionManager (transaction)

The Spring transaction manager to use.

PlatformTransaction Manager

transactionName (transaction)

The name of the transaction to use.

String

transactionTimeout (transaction)

The timeout value of the transaction (in seconds), if using transacted mode.

-1

int

testConnectionOn Startup (common)

Specifies whether to test the connection on startup. This ensures that when Camel starts that all the JMS consumers have a valid connection to the JMS broker. If a connection cannot be granted then Camel throws an exception on startup. This ensures that Camel is not started with failed connections. The JMS producers is tested as well.

false

boolean

asyncStartListener (advanced)

Whether to startup the JmsConsumer message listener asynchronously, when starting a route. For example if a JmsConsumer cannot get a connection to a remote JMS broker, then it may block while retrying and/or failover. This will cause Camel to block while starting routes. By setting this option to true, you will let routes startup, while the JmsConsumer connects to the JMS broker using a dedicated thread in asynchronous mode. If this option is used, then beware that if the connection could not be established, then an exception is logged at WARN level, and the consumer will not be able to receive messages; You can then restart the route to retry.

false

boolean

asyncStopListener (advanced)

Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.

false

boolean

forceSendOriginal Message (producer)

When using mapJmsMessage=false Camel will create a new JMS message to send to a new JMS destination if you touch the headers (get or set) during the route. Set this option to true to force Camel to send the original JMS message that was received.

false

boolean

requestTimeout (producer)

The timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds). The default is 20 seconds. You can include the header CamelJmsRequestTimeout to override this endpoint configured timeout value, and thus have per message individual timeout values. See also the requestTimeoutCheckerInterval option.

20000

long

requestTimeoutChecker Interval (advanced)

Configures how often Camel should check for timed out Exchanges when doing request/reply over JMS. By default Camel checks once per second. But if you must react faster when a timeout occurs, then you can lower this interval, to check more frequently. The timeout is determined by the option requestTimeout.

1000

long

transferExchange (advanced)

You can transfer the exchange over the wire instead of just the body and headers. The following fields are transferred: In body, Out body, Fault body, In headers, Out headers, Fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. You must enable this option on both the producer and consumer side, so Camel knows the payloads is an Exchange and not a regular payload.

false

boolean

transferException (advanced)

If enabled and you are using Request Reply messaging (InOut) and an Exchange failed on the consumer side, then the caused Exception will be send back in response as a javax.jms.ObjectMessage. If the client is Camel, the returned Exception is rethrown. This allows you to use Camel JMS as a bridge in your routing - for example, using persistent queues to enable robust routing. Notice that if you also have transferExchange enabled, this option takes precedence. The caught exception is required to be serializable. The original Exception on the consumer side can be wrapped in an outer exception such as org.apache.camel.RuntimeCamelException when returned to the producer.

false

boolean

transferFault (advanced)

If enabled and you are using Request Reply messaging (InOut) and an Exchange failed with a SOAP fault (not exception) on the consumer side, then the fault flag on Message#isFault() will be send back in the response as a JMS header with the key org.apache.camel.component.jms.JmsConstants#JMS_TRANSFER_FAULT#JMS_TRANSFER_FAULT. If the client is Camel, the returned fault flag will be set on the org.apache.camel.Message#setFault(boolean). You may want to enable this when using Camel components that support faults such as SOAP based such as cxf or spring-ws.

false

boolean

jmsOperations (advanced)

Allows you to use your own implementation of the org.springframework.jms.core.JmsOperations interface. Camel uses JmsTemplate as default. Can be used for testing purpose, but not used much as stated in the spring API docs.

JmsOperations

destinationResolver (advanced)

A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry).

DestinationResolver

replyToType (producer)

Allows for explicitly specifying which kind of strategy to use for replyTo queues when doing request/reply over JMS. Possible values are: Temporary, Shared, or Exclusive. By default Camel will use temporary queues. However if replyTo has been configured, then Shared is used by default. This option allows you to use exclusive queues instead of shared ones. See Camel JMS documentation for more details, and especially the notes about the implications if running in a clustered environment, and the fact that Shared reply queues has lower performance than its alternatives Temporary and Exclusive.

ReplyToType

preserveMessageQos (producer)

Set to true, if you want to send message using the QoS settings specified on the message, instead of the QoS settings on the JMS endpoint. The following three headers are considered JMSPriority, JMSDeliveryMode, and JMSExpiration. You can provide all or only some of them. If not provided, Camel will fall back to use the values from the endpoint instead. So, when using this option, the headers override the values from the endpoint. The explicitQosEnabled option, by contrast, will only use options set on the endpoint, and not values from the message header.

false

boolean

asyncConsumer (consumer)

Whether the JmsConsumer processes the Exchange asynchronously. If enabled then the JmsConsumer may pickup the next message from the JMS queue, while the previous message is being processed asynchronously (by the Asynchronous Routing Engine). This means that messages may be processed not 100% strictly in order. If disabled (as default) then the Exchange is fully processed before the JmsConsumer will pickup the next message from the JMS queue. Note if transacted has been enabled, then asyncConsumer=true does not run asynchronously, as transaction must be executed synchronously (Camel 3.0 may support async transactions).

false

boolean

allowNullBody (producer)

Whether to allow sending messages with no body. If this option is false and the message body is null, then an JMSException is thrown.

true

boolean

includeSentJMS MessageID (producer)

Only applicable when sending to JMS destination using InOnly (eg fire and forget). Enabling this option will enrich the Camel Exchange with the actual JMSMessageID that was used by the JMS client when the message was sent to the JMS destination.

false

boolean

includeAllJMSX Properties (advanced)

Whether to include all JMSXxxx properties when mapping from JMS to Camel Message. Setting this to true will include properties such as JMSXAppID, and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy then this option does not apply.

false

boolean

defaultTaskExecutor Type (consumer)

Specifies what default TaskExecutor type to use in the DefaultMessageListenerContainer, for both consumer endpoints and the ReplyTo consumer of producer endpoints. Possible values: SimpleAsync (uses Spring’s SimpleAsyncTaskExecutor) or ThreadPool (uses Spring’s ThreadPoolTaskExecutor with optimal values - cached threadpool-like). If not set, it defaults to the previous behaviour, which uses a cached thread pool for consumer endpoints and SimpleAsync for reply consumers. The use of ThreadPool is recommended to reduce thread trash in elastic configurations with dynamically increasing and decreasing concurrent consumers.

DefaultTaskExecutor Type

jmsKeyFormatStrategy (advanced)

Pluggable strategy for encoding and decoding JMS keys so they can be compliant with the JMS specification. Camel provides two implementations out of the box: default and passthrough. The default strategy will safely marshal dots and hyphens (. and -). The passthrough strategy leaves the key as is. Can be used for JMS brokers which do not care whether JMS header keys contain illegal characters. You can provide your own implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy and refer to it using the # notation.

JmsKeyFormatStrategy

allowAdditionalHeaders (producer)

This option is used to allow additional headers which may have values that are invalid according to JMS specification. For example some message systems such as WMQ do this with header names using prefix JMS_IBM_MQMD_ containing values with byte array or other invalid types. You can specify multiple header names separated by comma, and use as suffix for wildcard matching.

String

queueBrowseStrategy (advanced)

To use a custom QueueBrowseStrategy when browsing queues

QueueBrowseStrategy

messageCreatedStrategy (advanced)

To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message.

MessageCreatedStrategy

waitForProvision CorrelationToBeUpdated Counter (advanced)

Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.

50

int

waitForProvision CorrelationToBeUpdated ThreadSleepingTime (advanced)

Interval in millis to sleep each time while waiting for provisional correlation id to be updated.

100

long

correlationProperty (producer)

Use this JMS property to correlate messages in InOut exchange pattern (request-reply) instead of JMSCorrelationID property. This allows you to exchange messages with systems that do not correlate messages using JMSCorrelationID JMS property. If used JMSCorrelationID will not be used or set by Camel. The value of here named property will be generated if not supplied in the header of the message under the same name.

String

subscriptionDurable (consumer)

Set whether to make the subscription durable. The durable subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a durable subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well.

false

boolean

subscriptionShared (consumer)

Set whether to make the subscription shared. The shared subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a shared subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Note that shared subscriptions may also be durable, so this flag can (and often will) be combined with subscriptionDurable as well. Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well. Requires a JMS 2.0 compatible message broker.

false

boolean

subscriptionName (consumer)

Set the name of a subscription to create. To be applied in case of a topic (pub-sub domain) with a shared or durable subscription. The subscription name needs to be unique within this client’s JMS client id. Default is the class name of the specified message listener. Note: Only 1 concurrent consumer (which is the default of this message listener container) is allowed for each subscription, except for a shared subscription (which requires JMS 2.0).

String

streamMessageType Enabled (producer)

Sets whether StreamMessage type is enabled or not. Message payloads of streaming kind such as files, InputStream, etc will either by sent as BytesMessage or StreamMessage. This option controls which kind will be used. By default BytesMessage is used which enforces the entire message payload to be read into memory. By enabling this option the message payload is read into memory in chunks and each chunk is then written to the StreamMessage until no more data.

false

boolean

formatDateHeadersTo Iso8601 (producer)

Sets whether date headers should be formatted according to the ISO 8601 standard.

false

boolean

headerFilterStrategy (filter)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

resolveProperty Placeholders (advanced)

Whether the component should resolve property placeholders on itself when starting. Only properties which are of String type can use property placeholders.

true

boolean

camel.component.amqp.accept-messages-while-stopping

Specifies whether the consumer accept messages while it is stopping. You may consider enabling this option, if you start and stop JMS routes at runtime, while there are still messages enqueued on the queue. If this option is false, and you stop the JMS route, then messages may be rejected, and the JMS broker would have to attempt redeliveries, which yet again may be rejected, and eventually the message may be moved at a dead letter queue on the JMS broker. To avoid this its recommended to enable this option.

false

Boolean

camel.component.amqp.acknowledgement-mode

The JMS acknowledgement mode defined as an Integer. Allows you to set vendor-specific extensions to the acknowledgment mode.For the regular modes, it is preferable to use the acknowledgementModeName instead.

Integer

camel.component.amqp.acknowledgement-mode-name

The JMS acknowledgement name, which is one of: SESSION_TRANSACTED, CLIENT_ACKNOWLEDGE, AUTO_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE

AUTO_ ACKNOWLEDGE

String

camel.component.amqp.allow-additional-headers

This option is used to allow additional headers which may have values that are invalid according to JMS specification. For example some message systems such as WMQ do this with header names using prefix JMS_IBM_MQMD_ containing values with byte array or other invalid types. You can specify multiple header names separated by comma, and use as suffix for wildcard matching.

String

camel.component.amqp.allow-null-body

Whether to allow sending messages with no body. If this option is false and the message body is null, then an JMSException is thrown.

true

Boolean

camel.component.amqp.allow-reply-manager-quick-stop

Whether the DefaultMessageListenerContainer used in the reply managers for request-reply messaging allow the DefaultMessageListenerContainer.runningAllowed flag to quick stop in case JmsConfiguration#isAcceptMessagesWhileStopping is enabled, and org.apache.camel.CamelContext is currently being stopped. This quick stop ability is enabled by default in the regular JMS consumers but to enable for reply managers you must enable this flag.

false

Boolean

camel.component.amqp.always-copy-message

If true, Camel will always make a JMS message copy of the message when it is passed to the producer for sending. Copying the message is needed in some situations, such as when a replyToDestinationSelectorName is set (incidentally, Camel will set the alwaysCopyMessage option to true, if a replyToDestinationSelectorName is set)

false

Boolean

camel.component.amqp.async-consumer

Whether the JmsConsumer processes the Exchange asynchronously. If enabled then the JmsConsumer may pickup the next message from the JMS queue, while the previous message is being processed asynchronously (by the Asynchronous Routing Engine). This means that messages may be processed not 100% strictly in order. If disabled (as default) then the Exchange is fully processed before the JmsConsumer will pickup the next message from the JMS queue. Note if transacted has been enabled, then asyncConsumer=true does not run asynchronously, as transaction must be executed synchronously (Camel 3.0 may support async transactions).

false

Boolean

camel.component.amqp.async-start-listener

Whether to startup the JmsConsumer message listener asynchronously, when starting a route. For example if a JmsConsumer cannot get a connection to a remote JMS broker, then it may block while retrying and/or failover. This will cause Camel to block while starting routes. By setting this option to true, you will let routes startup, while the JmsConsumer connects to the JMS broker using a dedicated thread in asynchronous mode. If this option is used, then beware that if the connection could not be established, then an exception is logged at WARN level, and the consumer will not be able to receive messages; You can then restart the route to retry.

false

Boolean

camel.component.amqp.async-stop-listener

Whether to stop the JmsConsumer message listener asynchronously, when stopping a route.

false

Boolean

camel.component.amqp.auto-startup

Specifies whether the consumer container should auto-startup.

true

Boolean

camel.component.amqp.cache-level

Sets the cache level by ID for the underlying JMS resources. See cacheLevelName option for more details.

Integer

camel.component.amqp.cache-level-name

Sets the cache level by name for the underlying JMS resources. Possible values are: CACHE_AUTO, CACHE_CONNECTION, CACHE_CONSUMER, CACHE_NONE, and CACHE_SESSION. The default setting is CACHE_AUTO. See the Spring documentation and Transactions Cache Levels for more information.

CACHE_AUTO

String

camel.component.amqp.client-id

Sets the JMS client ID to use. Note that this value, if specified, must be unique and can only be used by a single JMS connection instance. It is typically only required for durable topic subscriptions. If using Apache ActiveMQ you may prefer to use Virtual Topics instead.

String

camel.component.amqp.concurrent-consumers

Specifies the default number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.

1

Integer

camel.component.amqp.configuration

To use a shared JMS configuration. The option is a org.apache.camel.component.jms.JmsConfiguration type.

String

camel.component.amqp.connection-factory

The connection factory to be use. A connection factory must be configured either on the component or endpoint. The option is a javax.jms.ConnectionFactory type.

String

camel.component.amqp.correlation-property

Use this JMS property to correlate messages in InOut exchange pattern (request-reply) instead of JMSCorrelationID property. This allows you to exchange messages with systems that do not correlate messages using JMSCorrelationID JMS property. If used JMSCorrelationID will not be used or set by Camel. The value of here named property will be generated if not supplied in the header of the message under the same name.

String

camel.component.amqp.default-task-executor-type

Specifies what default TaskExecutor type to use in the DefaultMessageListenerContainer, for both consumer endpoints and the ReplyTo consumer of producer endpoints. Possible values: SimpleAsync (uses Spring’s SimpleAsyncTaskExecutor) or ThreadPool (uses Spring’s ThreadPoolTaskExecutor with optimal values - cached threadpool-like). If not set, it defaults to the previous behaviour, which uses a cached thread pool for consumer endpoints and SimpleAsync for reply consumers. The use of ThreadPool is recommended to reduce thread trash in elastic configurations with dynamically increasing and decreasing concurrent consumers.

DefaultTaskExecutor Type

camel.component.amqp.delivery-mode

Specifies the delivery mode to be used. Possibles values are those defined by javax.jms.DeliveryMode. NON_PERSISTENT = 1 and PERSISTENT = 2.

Integer

camel.component.amqp.delivery-persistent

Specifies whether persistent delivery is used by default.

true

Boolean

camel.component.amqp.destination-resolver

A pluggable org.springframework.jms.support.destination.DestinationResolver that allows you to use your own resolver (for example, to lookup the real destination in a JNDI registry). The option is a org.springframework.jms.support.destination.DestinationResolver type.

String

camel.component.amqp.durable-subscription-name

The durable subscriber name for specifying durable topic subscriptions. The clientId option must be configured as well.

String

camel.component.amqp.eager-loading-of-properties

Enables eager loading of JMS properties as soon as a message is loaded which generally is inefficient as the JMS properties may not be required but sometimes can catch early any issues with the underlying JMS provider and the use of JMS properties

false

Boolean

camel.component.amqp.enabled

Enable amqp component

true

Boolean

camel.component.amqp.error-handler

Specifies a org.springframework.util.ErrorHandler to be invoked in case of any uncaught exceptions thrown while processing a Message. By default these exceptions will be logged at the WARN level, if no errorHandler has been configured. You can configure logging level and whether stack traces should be logged using errorHandlerLoggingLevel and errorHandlerLogStackTrace options. This makes it much easier to configure, than having to code a custom errorHandler. The option is a org.springframework.util.ErrorHandler type.

String

camel.component.amqp.error-handler-log-stack-trace

Allows to control whether stacktraces should be logged or not, by the default errorHandler.

true

Boolean

camel.component.amqp.error-handler-logging-level

Allows to configure the default errorHandler logging level for logging uncaught exceptions.

LoggingLevel

camel.component.amqp.exception-listener

Specifies the JMS Exception Listener that is to be notified of any underlying JMS exceptions. The option is a javax.jms.ExceptionListener type.

String

camel.component.amqp.explicit-qos-enabled

Set if the deliveryMode, priority or timeToLive qualities of service should be used when sending messages. This option is based on Spring’s JmsTemplate. The deliveryMode, priority and timeToLive options are applied to the current endpoint. This contrasts with the preserveMessageQos option, which operates at message granularity, reading QoS properties exclusively from the Camel In message headers.

false

Boolean

camel.component.amqp.expose-listener-session

Specifies whether the listener session should be exposed when consuming messages.

false

Boolean

camel.component.amqp.force-send-original-message

When using mapJmsMessage=false Camel will create a new JMS message to send to a new JMS destination if you touch the headers (get or set) during the route. Set this option to true to force Camel to send the original JMS message that was received.

false

Boolean

camel.component.amqp.format-date-headers-to-iso8601

Sets whether date headers should be formatted according to the ISO 8601 standard.

false

Boolean

camel.component.amqp.header-filter-strategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

String

camel.component.amqp.idle-consumer-limit

Specify the limit for the number of consumers that are allowed to be idle at any given time.

1

Integer

camel.component.amqp.idle-task-execution-limit

Specifies the limit for idle executions of a receive task, not having received any message within its execution. If this limit is reached, the task will shut down and leave receiving to other executing tasks (in the case of dynamic scheduling; see the maxConcurrentConsumers setting). There is additional doc available from Spring.

1

Integer

camel.component.amqp.include-all-j-m-s-x-properties

Whether to include all JMSXxxx properties when mapping from JMS to Camel Message. Setting this to true will include properties such as JMSXAppID, and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy then this option does not apply.

false

Boolean

camel.component.amqp.include-sent-j-m-s-message-i-d

Only applicable when sending to JMS destination using InOnly (eg fire and forget). Enabling this option will enrich the Camel Exchange with the actual JMSMessageID that was used by the JMS client when the message was sent to the JMS destination.

false

Boolean

camel.component.amqp.jms-key-format-strategy

Pluggable strategy for encoding and decoding JMS keys so they can be compliant with the JMS specification. Camel provides two implementations out of the box: default and passthrough. The default strategy will safely marshal dots and hyphens (. and -). The passthrough strategy leaves the key as is. Can be used for JMS brokers which do not care whether JMS header keys contain illegal characters. You can provide your own implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy and refer to it using the # notation. The option is a org.apache.camel.component.jms.JmsKeyFormatStrategy type.

String

camel.component.amqp.jms-operations

Allows you to use your own implementation of the org.springframework.jms.core.JmsOperations interface. Camel uses JmsTemplate as default. Can be used for testing purpose, but not used much as stated in the spring API docs. The option is a org.springframework.jms.core.JmsOperations type.

String

camel.component.amqp.lazy-create-transaction-manager

If true, Camel will create a JmsTransactionManager, if there is no transactionManager injected when option transacted=true.

true

Boolean

camel.component.amqp.map-jms-message

Specifies whether Camel should auto map the received JMS message to a suited payload type, such as javax.jms.TextMessage to a String etc.

true

Boolean

camel.component.amqp.max-concurrent-consumers

Specifies the maximum number of concurrent consumers when consuming from JMS (not for request/reply over JMS). See also the maxMessagesPerTask option to control dynamic scaling up/down of threads. When doing request/reply over JMS then the option replyToMaxConcurrentConsumers is used to control number of concurrent consumers on the reply message listener.

Integer

camel.component.amqp.max-messages-per-task

The number of messages per task. -1 is unlimited. If you use a range for concurrent consumers (eg min max), then this option can be used to set a value to eg 100 to control how fast the consumers will shrink when less work is required.

-1

Integer

camel.component.amqp.message-converter

To use a custom Spring org.springframework.jms.support.converter.MessageConverter so you can be in control how to map to/from a javax.jms.Message. The option is a org.springframework.jms.support.converter.MessageConverter type.

String

camel.component.amqp.message-created-strategy

To use the given MessageCreatedStrategy which are invoked when Camel creates new instances of javax.jms.Message objects when Camel is sending a JMS message. The option is a org.apache.camel.component.jms.MessageCreatedStrategy type.

String

camel.component.amqp.message-id-enabled

When sending, specifies whether message IDs should be added. This is just an hint to the JMS broker.If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value

true

Boolean

camel.component.amqp.message-timestamp-enabled

Specifies whether timestamps should be enabled by default on sending messages. This is just an hint to the JMS broker.If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint the timestamp must be set to its normal value

true

Boolean

camel.component.amqp.password

Password to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

String

camel.component.amqp.preserve-message-qos

Set to true, if you want to send message using the QoS settings specified on the message, instead of the QoS settings on the JMS endpoint. The following three headers are considered JMSPriority, JMSDeliveryMode, and JMSExpiration. You can provide all or only some of them. If not provided, Camel will fall back to use the values from the endpoint instead. So, when using this option, the headers override the values from the endpoint. The explicitQosEnabled option, by contrast, will only use options set on the endpoint, and not values from the message header.

false

Boolean

camel.component.amqp.priority

Values greater than 1 specify the message priority when sending (where 0 is the lowest priority and 9 is the highest). The explicitQosEnabled option must also be enabled in order for this option to have any effect.

4

Integer

camel.component.amqp.pub-sub-no-local

Specifies whether to inhibit the delivery of messages published by its own connection.

false

Boolean

camel.component.amqp.queue-browse-strategy

To use a custom QueueBrowseStrategy when browsing queues. The option is a org.apache.camel.component.jms.QueueBrowseStrategy type.

String

camel.component.amqp.receive-timeout

The timeout for receiving messages (in milliseconds).

1000

Long

camel.component.amqp.recovery-interval

Specifies the interval between recovery attempts, i.e. when a connection is being refreshed, in milliseconds. The default is 5000 ms, that is, 5 seconds.

5000

Long

camel.component.amqp.reply-on-timeout-to-max-concurrent-consumers

Specifies the maximum number of concurrent consumers for continue routing when timeout occurred when using request/reply over JMS.

1

Integer

camel.component.amqp.reply-to-cache-level-name

Sets the cache level by name for the reply consumer when doing request/reply over JMS. This option only applies when using fixed reply queues (not temporary). Camel will by default use: CACHE_CONSUMER for exclusive or shared w/ replyToSelectorName. And CACHE_SESSION for shared without replyToSelectorName. Some JMS brokers such as IBM WebSphere may require to set the replyToCacheLevelName=CACHE_NONE to work. Note: If using temporary queues then CACHE_NONE is not allowed, and you must use a higher value such as CACHE_CONSUMER or CACHE_SESSION.

String

camel.component.amqp.reply-to-concurrent-consumers

Specifies the default number of concurrent consumers when doing request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

1

Integer

camel.component.amqp.reply-to-max-concurrent-consumers

Specifies the maximum number of concurrent consumers when using request/reply over JMS. See also the maxMessagesPerTask option to control dynamic scaling up/down of threads.

Integer

camel.component.amqp.reply-to-type

Allows for explicitly specifying which kind of strategy to use for replyTo queues when doing request/reply over JMS. Possible values are: Temporary, Shared, or Exclusive. By default Camel will use temporary queues. However if replyTo has been configured, then Shared is used by default. This option allows you to use exclusive queues instead of shared ones. See Camel JMS documentation for more details, and especially the notes about the implications if running in a clustered environment, and the fact that Shared reply queues has lower performance than its alternatives Temporary and Exclusive.

ReplyToType

camel.component.amqp.request-timeout

The timeout for waiting for a reply when using the InOut Exchange Pattern (in milliseconds). The default is 20 seconds. You can include the header CamelJmsRequestTimeout to override this endpoint configured timeout value, and thus have per message individual timeout values. See also the requestTimeoutCheckerInterval option.

20000

Long

camel.component.amqp.request-timeout-checker-interval

Configures how often Camel should check for timed out Exchanges when doing request/reply over JMS. By default Camel checks once per second. But if you must react faster when a timeout occurs, then you can lower this interval, to check more frequently. The timeout is determined by the option requestTimeout.

1000

Long

camel.component.amqp.resolve-property-placeholders

Whether the component should resolve property placeholders on itself when starting. Only properties which are of String type can use property placeholders.

true

Boolean

camel.component.amqp.stream-message-type-enabled

Sets whether StreamMessage type is enabled or not. Message payloads of streaming kind such as files, InputStream, etc will either by sent as BytesMessage or StreamMessage. This option controls which kind will be used. By default BytesMessage is used which enforces the entire message payload to be read into memory. By enabling this option the message payload is read into memory in chunks and each chunk is then written to the StreamMessage until no more data.

false

Boolean

camel.component.amqp.subscription-durable

Set whether to make the subscription durable. The durable subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a durable subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well.

false

Boolean

camel.component.amqp.subscription-name

Set the name of a subscription to create. To be applied in case of a topic (pub-sub domain) with a shared or durable subscription. The subscription name needs to be unique within this client’s JMS client id. Default is the class name of the specified message listener. Note: Only 1 concurrent consumer (which is the default of this message listener container) is allowed for each subscription, except for a shared subscription (which requires JMS 2.0).

String

camel.component.amqp.subscription-shared

Set whether to make the subscription shared. The shared subscription name to be used can be specified through the subscriptionName property. Default is false. Set this to true to register a shared subscription, typically in combination with a subscriptionName value (unless your message listener class name is good enough as subscription name). Note that shared subscriptions may also be durable, so this flag can (and often will) be combined with subscriptionDurable as well. Only makes sense when listening to a topic (pub-sub domain), therefore this method switches the pubSubDomain flag as well. Requires a JMS 2.0 compatible message broker.

false

Boolean

camel.component.amqp.task-executor

Allows you to specify a custom task executor for consuming messages. The option is a org.springframework.core.task.TaskExecutor type.

String

camel.component.amqp.test-connection-on-startup

Specifies whether to test the connection on startup. This ensures that when Camel starts that all the JMS consumers have a valid connection to the JMS broker. If a connection cannot be granted then Camel throws an exception on startup. This ensures that Camel is not started with failed connections. The JMS producers is tested as well.

false

Boolean

camel.component.amqp.time-to-live

When sending messages, specifies the time-to-live of the message (in milliseconds).

-1

Long

camel.component.amqp.transacted

Specifies whether to use transacted mode

false

Boolean

camel.component.amqp.transaction-manager

The Spring transaction manager to use. The option is a org.springframework.transaction.PlatformTransactionManager type.

String

camel.component.amqp.transaction-name

The name of the transaction to use.

String

camel.component.amqp.transaction-timeout

The timeout value of the transaction (in seconds), if using transacted mode.

-1

Integer

camel.component.amqp.transfer-exception

If enabled and you are using Request Reply messaging (InOut) and an Exchange failed on the consumer side, then the caused Exception will be send back in response as a javax.jms.ObjectMessage. If the client is Camel, the returned Exception is rethrown. This allows you to use Camel JMS as a bridge in your routing - for example, using persistent queues to enable robust routing. Notice that if you also have transferExchange enabled, this option takes precedence. The caught exception is required to be serializable. The original Exception on the consumer side can be wrapped in an outer exception such as org.apache.camel.RuntimeCamelException when returned to the producer.

false

Boolean

camel.component.amqp.transfer-exchange

You can transfer the exchange over the wire instead of just the body and headers. The following fields are transferred: In body, Out body, Fault body, In headers, Out headers, Fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. You must enable this option on both the producer and consumer side, so Camel knows the payloads is an Exchange and not a regular payload.

false

Boolean

camel.component.amqp.transfer-fault

If enabled and you are using Request Reply messaging (InOut) and an Exchange failed with a SOAP fault (not exception) on the consumer side, then the fault flag on Message#isFault() will be send back in the response as a JMS header with the key org.apache.camel.component.jms.JmsConstants #JMS_TRANSFER_FAULT#JMS_TRANSFER_FAULT. If the client is Camel, the returned fault flag will be set on the org.apache.camel.Message#setFault(boolean). You may want to enable this when using Camel components that support faults such as SOAP based such as cxf or spring-ws.

false

Boolean

camel.component.amqp.use-message-i-d-as-correlation-i-d

Specifies whether JMSMessageID should always be used as JMSCorrelationID for InOut messages.

false

Boolean

camel.component.amqp.username

Username to use with the ConnectionFactory. You can also configure username/password directly on the ConnectionFactory.

String

camel.component.amqp.wait-for-provision-correlation-to-be-updated-counter

Number of times to wait for provisional correlation id to be updated to the actual correlation id when doing request/reply over JMS and when the option useMessageIDAsCorrelationID is enabled.

50

Integer

camel.component.amqp.wait-for-provision-correlation-to-be-updated-thread-sleeping-time

Interval in millis to sleep each time while waiting for provisional correlation id to be updated.

100

Long