Chapter 5. Configure Public Key based SSH Authentication without a password


Configure public key based SSH authentication without a password for the root user on the first hyperconverged host to all hosts, including itself. Do this for all storage and management interfaces, and for both IP addresses and FQDNs.

5.1. Adding known hosts to the first host

When you use SSH to log in to a host from a system that is not already known to the host, you are prompted to add that system as a known host.

  1. Log in to the first hyperconverged host as the root user.
  2. Perform the following steps for each host in the cluster, including the first host.

    1. Use SSH to log in to a host as the root user.

      [root@server1]# ssh root@server1.example.com
    2. Enter yes to continue connecting.

      [root@server1]# ssh root@server2.example.com
      The authenticity of host 'server2.example.com (192.51.100.28)' can't be established.
      ECDSA key fingerprint is SHA256:Td8KqgVIPXdTIasdfa2xRwn3/asdBasdpnaGM.
      Are you sure you want to continue connecting (yes/no)?

      This automatically adds the host key of the first host to the known_hosts file on the target host.

      Are you sure you want to continue connecting (yes/no)? yes
      Warning: Permanently added '192.51.100.28' (ECDSA) to the list of known hosts.
    3. Enter the password for the root user on the target host to complete the login process.

      root@server2.example.com's password: ***************
      Last login: Mon May 27 10:04:49 2019
      [root@server2]#
    4. Log out of the host.

      [root@server2]# exit
      [root@server1]#
      Note

      When you log out of the SSH session from the first host to itself, the user and server in the command line prompt stay the same; it is only the session that changes.

      [root@server1]# exit
      [root@server1]#

5.2. Generating SSH key pairs without a password

Generating a public/private key pair lets you use key-based SSH authentication. Generating a key pair that does not use a password makes it simpler to use Ansible to automate deployment and configuration processes.

Procedure

  1. Log in to the first hyperconverged host as the root user.
  2. Generate an SSH key that does not use a password.

    1. Start the key generation process.

      # ssh-keygen -t rsa
      Generating public/private rsa key pair.
    2. Enter a location for the key.

      The default location, shown in parentheses, is used if no other input is provided.

      Enter file in which to save the key (/home/username/.ssh/id_rsa): <location>/<keyname>
    3. Specify and confirm an empty passphrase by pressing Enter twice.

      Enter passphrase (empty for no passphrase):
      Enter same passphrase again:

      The private key is saved in <location>/<keyname>. The public key is saved in <location>/<keyname>.pub.

      Your identification has been saved in <location>/<keyname>.
      Your public key has been saved in <location>/<keyname>.pub.
      The key fingerprint is SHA256:8BhZageKrLXM99z5f/AM9aPo/KAUd8ZZFPcPFWqK6+M root@server1.example.com
      The key's randomart image is:
      +---[ECDSA 256]---+
      |      . .      +=|
      | . . . =      o.o|
      |  + . * .    o...|
      | = . . *  . + +..|
      |. + . . So o * ..|
      |   . o . .+ =  ..|
      |      o oo ..=. .|
      |        ooo...+  |
      |        .E++oo   |
      +----[SHA256]-----+
      Warning

      Your identification in this output is your private key. Never share your private key. Possession of your private key allows someone else to impersonate you on any system that has your public key.

5.3. Copying SSH keys

To access a host using your private key, that host needs a copy of your public key.

Prerequisites

  • Generate a public/private key pair.
  • SSH access from the root user on the host to all storage and management interfaces on the same host, using both IP addresses and FQDNs.

Procedure

  1. Log in to the first host as the root user.
  2. Copy your public key to the host that you want to access.

    # ssh-copy-id -i <location>/<keyname>.pub <user>@<hostname>

    Enter the password for <user>@<hostname> if prompted.

    Warning

    Make sure that you use the file that ends in .pub. Never share your private key. Possession of your private key allows someone else to impersonate you on any system that has your public key.

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.