Chapter 18. CXF

There are two URI formats for this endpoint: cxfEndpoint and someAddress.

cxf:bean:cxfEndpoint[?options]

Where cxfEndpoint represents a bean ID that references a bean in the Spring bean registry. With this URI format, most of the endpoint details are specified in the bean definition.

cxf://someAddress[?options]

Where someAddress specifies the CXF endpoint’s address. With this URI format, most of the endpoint details are specified using options.

For either style above, you can append options to the URI as follows:

cxf:bean:cxfEndpoint?wsdlURL=wsdl/hello_world.wsdl&dataFormat=PAYLOAD

Camel components are configured on two separate levels:

The CXF component supports 6 options, which are listed below.

The CXF endpoint is configured using URI syntax:

cxf:beanId:address

with the following path and query parameters:

@Bean
public CxfEndpoint serviceEndpoint(LoggingOutInterceptor loggingOutInterceptor) {
    CxfSpringEndpoint cxfEndpoint = new CxfSpringEndpoint();
    cxfEndpoint.setAddress("http://localhost:" + port
                            + "/services" + SERVICE_ADDRESS);
    cxfEndpoint.setServiceClass(org.apache.camel.component.cxf.HelloService.class);
    Map<String, Object> properties = new HashMap<String, Object>();
    properties.put("dataFormat", "RAW");
    cxfEndpoint.setProperties(properties);
    cxfEndpoint.getOutInterceptors().add(loggingOutInterceptor);
    return cxfEndpoint;
}


@Bean
public LoggingOutInterceptor loggingOutInterceptor() {
    LoggingOutInterceptor logger = new LoggingOutInterceptor("write");
    return logger;
}

<cxf:cxfEndpoint ...>
   <cxf:properties>
     <entry key="org.apache.camel.cxf.message.headers.relays">
       <list>
         <ref bean="customHeadersRelay"/>
       </list>
     </entry>
   </cxf:properties>
 </cxf:cxfEndpoint>
 <bean id="customHeadersRelay" class="org.apache.camel.component.cxf.soap.headers.CustomHeadersRelay"/>

@Bean
public HeaderFilterStrategy dropAllMessageHeadersStrategy() {
    CxfHeaderFilterStrategy headerFilterStrategy = new CxfHeaderFilterStrategy();
    headerFilterStrategy.setRelayHeaders(false);
    return headerFilterStrategy;
}

@Bean
public CxfEndpoint routerNoRelayEndpoint(HeaderFilterStrategy dropAllMessageHeadersStrategy) {
    CxfSpringEndpoint cxfEndpoint = new CxfSpringEndpoint();
    cxfEndpoint.setServiceClass(org.apache.camel.component.cxf.soap.headers.HeaderTester.class);
    cxfEndpoint.setAddress("/CxfMessageHeadersRelayTest/HeaderService/routerNoRelayEndpoint");
    cxfEndpoint.setWsdlURL("soap_header.wsdl");
    cxfEndpoint.setEndpointNameAsQName(
        QName.valueOf("{http://apache.org/camel/component/cxf/soap/headers}SoapPortNoRelay"));
    cxfEndpoint.setServiceNameAsQName(SERVICENAME);
    Map<String, Object> properties = new HashMap<String, Object>();
    properties.put("dataFormat", "PAYLOAD");
    cxfEndpoint.setProperties(properties);
    cxfEndpoint.setHeaderFilterStrategy(dropAllMessageHeadersStrategy);
    return cxfEndpoint;
}

@Bean
public CxfEndpoint serviceNoRelayEndpoint(HeaderFilterStrategy dropAllMessageHeadersStrategy) {
    CxfSpringEndpoint cxfEndpoint = new CxfSpringEndpoint();
    cxfEndpoint.setServiceClass(org.apache.camel.component.cxf.soap.headers.HeaderTester.class);
    cxfEndpoint.setAddress("http://localhost:" + port + "/services/CxfMessageHeadersRelayTest/HeaderService/routerNoRelayEndpointBackend");
    cxfEndpoint.setWsdlURL("soap_header.wsdl");
    cxfEndpoint.setEndpointNameAsQName(
        QName.valueOf("{http://apache.org/camel/component/cxf/soap/headers}SoapPortNoRelay"));
    cxfEndpoint.setServiceNameAsQName(SERVICENAME);
    Map<String, Object> properties = new HashMap<String, Object>();
    properties.put("dataFormat", "PAYLOAD");
    cxfEndpoint.setProperties(properties);
    cxfEndpoint.setHeaderFilterStrategy(dropAllMessageHeadersStrategy);
    return cxfEndpoint;
}

rom("cxf:bean:routerNoRelayEndpoint")
    .to("cxf:bean:serviceNoRelayEndpoint");

@Bean
public HeaderFilterStrategy customMessageFilterStrategy() {
    CxfHeaderFilterStrategy headerFilterStrategy = new CxfHeaderFilterStrategy();
    List<MessageHeaderFilter> headerFilterList = new ArrayList<MessageHeaderFilter>();
    headerFilterList.add(new SoapMessageHeaderFilter());
    headerFilterList.add(new CustomHeaderFilter());
    headerFilterStrategy.setMessageHeaderFilters(headerFilterList);
    return headerFilterStrategy;
}

You can configure the CXF endpoint with the Spring configuration file shown below, and you can also embed the endpoint into the camelContext tags. When you are invoking the service endpoint, you can set the operationName and operationNamespace headers to explicitly state which operation you are calling.

<beans xmlns="http://www.springframework.org/schema/beans"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xmlns:cxf="http://camel.apache.org/schema/cxf"
        xsi:schemaLocation="
        http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
        http://camel.apache.org/schema/cxf http://camel.apache.org/schema/cxf/camel-cxf.xsd
        http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">
     <cxf:cxfEndpoint id="routerEndpoint" address="http://localhost:9003/CamelContext/RouterPort"
            serviceClass="org.apache.hello_world_soap_http.GreeterImpl"/>
     <cxf:cxfEndpoint id="serviceEndpoint" address="http://localhost:9000/SoapContext/SoapPort"
            wsdlURL="testutils/hello_world.wsdl"
            serviceClass="org.apache.hello_world_soap_http.Greeter"
            endpointName="s:SoapPort"
            serviceName="s:SOAPService"
        xmlns:s="http://apache.org/hello_world_soap_http" />
     <camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
       <route>
         <from uri="cxf:bean:routerEndpoint" />
         <to uri="cxf:bean:serviceEndpoint" />
       </route>
    </camelContext>
  </beans>

Be sure to include the JAX-WS schemaLocation attribute specified on the root beans element. This allows CXF to validate the file and is required. Also note the namespace declarations at the end of the <cxf:cxfEndpoint/> tag. These declarations are required because the combined {namespace}localName syntax is presently not supported for this tag’s attribute values.

The cxf:cxfEndpoint element supports many additional attributes:

It also supports many child elements:

You can find more advanced examples that show how to provide interceptors, properties and handlers on the CXF JAX-WS Configuration page.

<cxf:cxfEndpoint id="testEndpoint" address="http://localhost:9000/router"
     serviceClass="org.apache.camel.component.cxf.HelloService"
     endpointName="s:PortName"
     serviceName="s:ServiceName"
     xmlns:s="http://www.example.com/test">
     <cxf:properties>
       <entry key="dataFormat" value="RAW"/>
       <entry key="setDefaultBus" value="true"/>
     </cxf:properties>
   </cxf:cxfEndpoint>

@ImportResource({
		"classpath:spring-configuration.xml"
})

CXF’s default logger is java.util.logging. If you want to change it to log4j, proceed as follows. Create a file, in the classpath, named META-INF/cxf/org.apache.cxf.logger. This file should contain the fully-qualified name of the class, org.apache.cxf.common.logging.Log4jLogger, with no comments, on a single line.

If you are using some SOAP client such as PHP, you will get this kind of error, because CXF doesn’t add the XML processing instruction <?xml version="1.0" encoding="utf-8"?>:

Error:sendSms: SoapFault exception: [Client] looks like we got no XML document in [...]

To resolve this issue, you just need to tell StaxOutInterceptor to write the XML start document for you, as in the WriteXmlDeclarationInterceptor below:

public class WriteXmlDeclarationInterceptor extends AbstractPhaseInterceptor<SoapMessage> {
    public WriteXmlDeclarationInterceptor() {
        super(Phase.PRE_STREAM);
        addBefore(StaxOutInterceptor.class.getName());
    }

    public void handleMessage(SoapMessage message) throws Fault {
        message.put("org.apache.cxf.stax.force-start-document", Boolean.TRUE);
    }

}

As an alternative you can add a message header for it as demonstrated in CxfConsumerTest:

 // set up the response context which force start document
 Map<String, Object> map = new HashMap<String, Object>();
 map.put("org.apache.cxf.stax.force-start-document", Boolean.TRUE);
 exchange.getOut().setHeader(Client.RESPONSE_CONTEXT, map);

The camel-cxf producer supports to override the target service address by setting a message header CamelDestinationOverrideUrl.

 // set up the service address from the message header to override the setting of CXF endpoint
 exchange.getIn().setHeader(Exchange.DESTINATION_OVERRIDE_URL, constant(getServiceAddress()));

The camel-cxf endpoint consumer POJO data format is based on the CXF invoker, so the message header has a property with the name of CxfConstants.OPERATION_NAME and the message body is a list of the SEI method parameters.

Consider the PersonProcessor example code:

public class PersonProcessor implements Processor {

    private static final Logger LOG = LoggerFactory.getLogger(PersonProcessor.class);

    @Override
    @SuppressWarnings("unchecked")
    public void process(Exchange exchange) throws Exception {
        LOG.info("processing exchange in camel");

        BindingOperationInfo boi = (BindingOperationInfo) exchange.getProperty(BindingOperationInfo.class.getName());
        if (boi != null) {
            LOG.info("boi.isUnwrapped" + boi.isUnwrapped());
        }
        // Get the parameters list which element is the holder.
        MessageContentsList msgList = (MessageContentsList) exchange.getIn().getBody();
        Holder<String> personId = (Holder<String>) msgList.get(0);
        Holder<String> ssn = (Holder<String>) msgList.get(1);
        Holder<String> name = (Holder<String>) msgList.get(2);

        if (personId.value == null || personId.value.length() == 0) {
            LOG.info("person id 123, so throwing exception");
            // Try to throw out the soap fault message
            org.apache.camel.wsdl_first.types.UnknownPersonFault personFault
                    = new org.apache.camel.wsdl_first.types.UnknownPersonFault();
            personFault.setPersonId("");
            org.apache.camel.wsdl_first.UnknownPersonFault fault
                    = new org.apache.camel.wsdl_first.UnknownPersonFault("Get the null value of person name", personFault);
            exchange.getMessage().setBody(fault);
            return;
        }

        name.value = "Bonjour";
        ssn.value = "123";
        LOG.info("setting Bonjour as the response");
        // Set the response message, first element is the return value of the operation,
        // the others are the holders of method parameters
        exchange.getMessage().setBody(new Object[] { null, personId, ssn, name });
    }

}

The camel-cxf endpoint producer is based on the CXF client API. First you need to specify the operation name in the message header, then add the method parameters to a list, and initialize the message with this parameter list. The response message’s body is a messageContentsList, you can get the result from that list.

If you don’t specify the operation name in the message header, CxfProducer will try to use the defaultOperationName from CxfEndpoint, if there is no defaultOperationName set on CxfEndpoint, it will pick up the first operationName from the Operation list.

If you want to get the object array from the message body, you can get the body using message.getBody(Object[].class), as shown in CxfProducerRouterTest.testInvokingSimpleServerWithParams:

Exchange senderExchange = new DefaultExchange(context, ExchangePattern.InOut);
final List<String> params = new ArrayList<>();
// Prepare the request message for the camel-cxf procedure
params.add(TEST_MESSAGE);
senderExchange.getIn().setBody(params);
senderExchange.getIn().setHeader(CxfConstants.OPERATION_NAME, ECHO_OPERATION);

Exchange exchange = template.send("direct:EndpointA", senderExchange);

org.apache.camel.Message out = exchange.getMessage();
// The response message's body is an MessageContentsList which first element is the return value of the operation,
// If there are some holder parameters, the holder parameter will be filled in the reset of List.
// The result will be extract from the MessageContentsList with the String class type
MessageContentsList result = (MessageContentsList) out.getBody();
LOG.info("Received output text: " + result.get(0));
Map<String, Object> responseContext = CastUtils.cast((Map<?, ?>) out.getHeader(Client.RESPONSE_CONTEXT));
assertNotNull(responseContext);
assertEquals("UTF-8", responseContext.get(org.apache.cxf.message.Message.ENCODING),
        "We should get the response context here");
assertEquals("echo " + TEST_MESSAGE, result.get(0), "Reply body on Camel is wrong");

PAYLOAD means that you process the payload from the SOAP envelope as a native CxfPayload. Message.getBody() will return a org.apache.camel.component.cxf.CxfPayload object, with getters for SOAP message headers and the SOAP body.

See CxfConsumerPayloadTest:

protected RouteBuilder createRouteBuilder() {
    return new RouteBuilder() {
        public void configure() {
            from(simpleEndpointURI + "&dataFormat=PAYLOAD").to("log:info").process(new Processor() {
                @SuppressWarnings("unchecked")
                public void process(final Exchange exchange) throws Exception {
                    CxfPayload<SoapHeader> requestPayload = exchange.getIn().getBody(CxfPayload.class);
                    List<Source> inElements = requestPayload.getBodySources();
                    List<Source> outElements = new ArrayList<>();
                    // You can use a customer toStringConverter to turn a CxfPayLoad message into String as you want
                    String request = exchange.getIn().getBody(String.class);
                    XmlConverter converter = new XmlConverter();
                    String documentString = ECHO_RESPONSE;

                    Element in = new XmlConverter().toDOMElement(inElements.get(0));
                    // Just check the element namespace
                    if (!in.getNamespaceURI().equals(ELEMENT_NAMESPACE)) {
                        throw new IllegalArgumentException("Wrong element namespace");
                    }
                    if (in.getLocalName().equals("echoBoolean")) {
                        documentString = ECHO_BOOLEAN_RESPONSE;
                        checkRequest("ECHO_BOOLEAN_REQUEST", request);
                    } else {
                        documentString = ECHO_RESPONSE;
                        checkRequest("ECHO_REQUEST", request);
                    }
                    Document outDocument = converter.toDOMDocument(documentString, exchange);
                    outElements.add(new DOMSource(outDocument.getDocumentElement()));
                    // set the payload header with null
                    CxfPayload<SoapHeader> responsePayload = new CxfPayload<>(null, outElements, null);
                    exchange.getMessage().setBody(responsePayload);
                }
            });
        }
    };
}

POJO means that the data format is a "list of Java objects" when the camel-cxf endpoint produces or consumes Camel exchanges. Even though Camel exposes the message body as POJOs in this mode, camel-cxf still provides access to read and write SOAP headers. However, since CXF interceptors remove in-band SOAP headers from the header list after they have been processed, only out-of-band SOAP headers are available to camel-cxf in POJO mode.

The following example illustrates how to get/set SOAP headers. Suppose we have a route that forwards from one Camel-cxf endpoint to another. That is, SOAP Client Camel CXF service. We can attach two processors to obtain/insert SOAP headers at (1) before a request goes out to the CXF service and (2) before the response comes back to the SOAP Client. Processor (1) and (2) in this example are InsertRequestOutHeaderProcessor and InsertResponseOutHeaderProcessor. Our route looks like this:

from("cxf:bean:routerRelayEndpointWithInsertion")
    .process(new InsertRequestOutHeaderProcessor())
    .to("cxf:bean:serviceRelayEndpointWithInsertion")
    .process(new InsertResponseOutHeaderProcessor());

The Bean routerRelayEndpointWithInsertion and serviceRelayEndpointWithInsertion are defined as follows:

@Bean
public CxfEndpoint routerRelayEndpointWithInsertion() {
    CxfSpringEndpoint cxfEndpoint = new CxfSpringEndpoint();
    cxfEndpoint.setServiceClass(org.apache.camel.component.cxf.soap.headers.HeaderTester.class);
    cxfEndpoint.setAddress("/CxfMessageHeadersRelayTest/HeaderService/routerRelayEndpointWithInsertion");
    cxfEndpoint.setWsdlURL("soap_header.wsdl");
    cxfEndpoint.setEndpointNameAsQName(
        QName.valueOf("{http://apache.org/camel/component/cxf/soap/headers}SoapPortRelayWithInsertion"));
    cxfEndpoint.setServiceNameAsQName(SERVICENAME);
    cxfEndpoint.getFeatures().add(new LoggingFeature());
    return cxfEndpoint;
}

@Bean
public CxfEndpoint serviceRelayEndpointWithInsertion() {
    CxfSpringEndpoint cxfEndpoint = new CxfSpringEndpoint();
    cxfEndpoint.setServiceClass(org.apache.camel.component.cxf.soap.headers.HeaderTester.class);
    cxfEndpoint.setAddress("http://localhost:" + port + "/services/CxfMessageHeadersRelayTest/HeaderService/routerRelayEndpointWithInsertionBackend");
    cxfEndpoint.setWsdlURL("soap_header.wsdl");
    cxfEndpoint.setEndpointNameAsQName(
        QName.valueOf("{http://apache.org/camel/component/cxf/soap/headers}SoapPortRelayWithInsertion"));
    cxfEndpoint.setServiceNameAsQName(SERVICENAME);
    cxfEndpoint.getFeatures().add(new LoggingFeature());
    return cxfEndpoint;
}

SOAP headers are propagated to and from Camel Message headers. The Camel message header name is "org.apache.cxf.headers.Header.list" which is a constant defined in CXF (org.apache.cxf.headers.Header.HEADER_LIST). The header value is a List of CXF SoapHeader objects (org.apache.cxf.binding.soap.SoapHeader). The following snippet is the InsertResponseOutHeaderProcessor (that insert a new SOAP header in the response message). The way to access SOAP headers in both InsertResponseOutHeaderProcessor and InsertRequestOutHeaderProcessor are actually the same. The only difference between the two processors is setting the direction of the inserted SOAP header.

You can find the InsertResponseOutHeaderProcessor example in CxfMessageHeadersRelayTest:

public static class InsertResponseOutHeaderProcessor implements Processor {

    public void process(Exchange exchange) throws Exception {
        List<SoapHeader> soapHeaders = CastUtils.cast((List<?>)exchange.getIn().getHeader(Header.HEADER_LIST));

        // Insert a new header
        String xml = "<?xml version=\"1.0\" encoding=\"utf-8\"?><outofbandHeader "
            + "xmlns=\"http://cxf.apache.org/outofband/Header\" hdrAttribute=\"testHdrAttribute\" "
            + "xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\" soap:mustUnderstand=\"1\">"
            + "<name>New_testOobHeader</name><value>New_testOobHeaderValue</value></outofbandHeader>";
        SoapHeader newHeader = new SoapHeader(soapHeaders.get(0).getName(),
                       DOMUtils.readXml(new StringReader(xml)).getDocumentElement());
        // make sure direction is OUT since it is a response message.
        newHeader.setDirection(Direction.DIRECTION_OUT);
        //newHeader.setMustUnderstand(false);
        soapHeaders.add(newHeader);

    }

}

We’ve already shown how to access the SOAP message as CxfPayload object in PAYLOAD mode inm the section How to deal with the message for a camel-cxf endpoint in PAYLOAD data format.

Once you obtain a CxfPayload object, you can invoke the CxfPayload.getHeaders() method that returns a List of DOM Elements (SOAP headers).

For an example see CxfPayLoadSoapHeaderTest:

from(getRouterEndpointURI()).process(new Processor() {
    @SuppressWarnings("unchecked")
    public void process(Exchange exchange) throws Exception {
        CxfPayload<SoapHeader> payload = exchange.getIn().getBody(CxfPayload.class);
        List<Source> elements = payload.getBodySources();
        assertNotNull(elements, "We should get the elements here");
        assertEquals(1, elements.size(), "Get the wrong elements size");

        Element el = new XmlConverter().toDOMElement(elements.get(0));
        elements.set(0, new DOMSource(el));
        assertEquals("http://camel.apache.org/pizza/types",
                el.getNamespaceURI(), "Get the wrong namespace URI");

        List<SoapHeader> headers = payload.getHeaders();
        assertNotNull(headers, "We should get the headers here");
        assertEquals(1, headers.size(), "Get the wrong headers size");
        assertEquals("http://camel.apache.org/pizza/types",
                ((Element) (headers.get(0).getObject())).getNamespaceURI(), "Get the wrong namespace URI");
        // alternatively you can also get the SOAP header via the camel header:
        headers = exchange.getIn().getHeader(Header.HEADER_LIST, List.class);
        assertNotNull(headers, "We should get the headers here");
        assertEquals(1, headers.size(), "Get the wrong headers size");
        assertEquals("http://camel.apache.org/pizza/types",
                ((Element) (headers.get(0).getObject())).getNamespaceURI(), "Get the wrong namespace URI");

    }

})
.to(getServiceEndpointURI());

You can also use the same way as described in sub-chapter "How to get and set SOAP headers in POJO mode" to set or get the SOAP headers. So, you can use the header "org.apache.cxf.headers.Header.list" to get and set a list of SOAP headers.This does also mean that if you have a route that forwards from one Camel-cxf endpoint to another (SOAP Client Camel CXF service), now also the SOAP headers sent by the SOAP client are forwarded to the CXF service. If you do not want that these headers are forwarded you have to remove them in the Camel header "org.apache.cxf.headers.Header.list".

SOAP headers are not available in RAW mode as SOAP processing is skipped.

If you are using a camel-cxf endpoint to consume the SOAP request, you may need to throw the SOAP Fault from the camel context.
Basically, you can use the throwFault DSL to do that; it works for POJO, PAYLOAD and MESSAGE data format.
You can define the soap fault as shown in CxfCustomizedExceptionTest:

SOAP_FAULT = new SoapFault(EXCEPTION_MESSAGE, SoapFault.FAULT_CODE_CLIENT);
Element detail = SOAP_FAULT.getOrCreateDetail();
Document doc = detail.getOwnerDocument();
Text tn = doc.createTextNode(DETAIL_TEXT);
detail.appendChild(tn);

Then throw it as you like

from(routerEndpointURI).setFaultBody(constant(SOAP_FAULT));

If your CXF endpoint is working in the MESSAGE data format, you could set the SOAP Fault message in the message body and set the response code in the message header as demonstrated by CxfMessageStreamExceptionTest

from(routerEndpointURI).process(new Processor() {

    public void process(Exchange exchange) throws Exception {
        Message out = exchange.getOut();
        // Set the message body with the
        out.setBody(this.getClass().getResourceAsStream("SoapFaultMessage.xml"));
        // Set the response code here
        out.setHeader(org.apache.cxf.message.Message.RESPONSE_CODE, new Integer(500));
    }

});

Same for using POJO data format. You can set the SOAPFault on the out body.

CXF client API provides a way to invoke the operation with request and response context. If you are using a camel-cxf endpoint producer to invoke the outside web service, you can set the request context and get response context with the following code:

        CxfExchange exchange = (CxfExchange)template.send(getJaxwsEndpointUri(), new Processor() {
             public void process(final Exchange exchange) {
                 final List<String> params = new ArrayList<String>();
                 params.add(TEST_MESSAGE);
                 // Set the request context to the inMessage
                 Map<String, Object> requestContext = new HashMap<String, Object>();
                 requestContext.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, JAXWS_SERVER_ADDRESS);
                 exchange.getIn().setBody(params);
                 exchange.getIn().setHeader(Client.REQUEST_CONTEXT , requestContext);
                 exchange.getIn().setHeader(CxfConstants.OPERATION_NAME, GREET_ME_OPERATION);
             }
         });
         org.apache.camel.Message out = exchange.getOut();
         // The output is an object array, the first element of the array is the return value
         Object\[\] output = out.getBody(Object\[\].class);
         LOG.info("Received output text: " + output\[0\]);
         // Get the response context form outMessage
         Map<String, Object> responseContext = CastUtils.cast((Map)out.getHeader(Client.RESPONSE_CONTEXT));
         assertNotNull(responseContext);
         assertEquals("Get the wrong wsdl operation name", "{http://apache.org/hello_world_soap_http}greetMe",
                      responseContext.get("javax.xml.ws.wsdl.operation").toString());

POJO Mode: Both SOAP with Attachment and MTOM are supported (see example in Payload Mode for enabling MTOM). However, SOAP with Attachment is not tested. Since attachments are marshalled and unmarshalled into POJOs, users typically do not need to deal with the attachment themself. Attachments are propagated to Camel message’s attachments if the MTOM is not enabled. So, it is possible to retrieve attachments by Camel Message API

DataHandler Message.getAttachment(String id)

Payload Mode: MTOM is supported by the component. Attachments can be retrieved by Camel Message APIs mentioned above. SOAP with Attachment (SwA) is supported and attachments can be retrieved. SwA is the default (same as setting the CXF endpoint property "mtom-enabled" to false).

To enable MTOM, set the CXF endpoint property "mtom-enabled" to true.

@Bean
public CxfEndpoint routerEndpoint() {
    CxfSpringEndpoint cxfEndpoint = new CxfSpringEndpoint();
    cxfEndpoint.setServiceNameAsQName(SERVICE_QNAME);
    cxfEndpoint.setEndpointNameAsQName(PORT_QNAME);
    cxfEndpoint.setAddress("/" + getClass().getSimpleName()+ "/jaxws-mtom/hello");
    cxfEndpoint.setWsdlURL("mtom.wsdl");
    Map<String, Object> properties = new HashMap<String, Object>();
    properties.put("dataFormat", "PAYLOAD");
    properties.put("mtom-enabled", true);
    cxfEndpoint.setProperties(properties);
    return cxfEndpoint;
}

You can produce a Camel message with attachment to send to a CXF endpoint in Payload mode.

Exchange exchange = context.createProducerTemplate().send("direct:testEndpoint", new Processor() {

    public void process(Exchange exchange) throws Exception {
        exchange.setPattern(ExchangePattern.InOut);
        List<Source> elements = new ArrayList<Source>();
        elements.add(new DOMSource(DOMUtils.readXml(new StringReader(MtomTestHelper.REQ_MESSAGE)).getDocumentElement()));
        CxfPayload<SoapHeader> body = new CxfPayload<SoapHeader>(new ArrayList<SoapHeader>(),
            elements, null);
        exchange.getIn().setBody(body);
        exchange.getIn().addAttachment(MtomTestHelper.REQ_PHOTO_CID,
            new DataHandler(new ByteArrayDataSource(MtomTestHelper.REQ_PHOTO_DATA, "application/octet-stream")));

        exchange.getIn().addAttachment(MtomTestHelper.REQ_IMAGE_CID,
            new DataHandler(new ByteArrayDataSource(MtomTestHelper.requestJpeg, "image/jpeg")));

    }

});

// process response

CxfPayload<SoapHeader> out = exchange.getOut().getBody(CxfPayload.class);
Assert.assertEquals(1, out.getBody().size());

Map<String, String> ns = new HashMap<String, String>();
ns.put("ns", MtomTestHelper.SERVICE_TYPES_NS);
ns.put("xop", MtomTestHelper.XOP_NS);

XPathUtils xu = new XPathUtils(ns);
Element oute = new XmlConverter().toDOMElement(out.getBody().get(0));
Element ele = (Element)xu.getValue("//ns:DetailResponse/ns:photo/xop:Include", oute,
                                   XPathConstants.NODE);
String photoId = ele.getAttribute("href").substring(4); // skip "cid:"

ele = (Element)xu.getValue("//ns:DetailResponse/ns:image/xop:Include", oute,
                                   XPathConstants.NODE);
String imageId = ele.getAttribute("href").substring(4); // skip "cid:"

DataHandler dr = exchange.getOut().getAttachment(photoId);
Assert.assertEquals("application/octet-stream", dr.getContentType());
MtomTestHelper.assertEquals(MtomTestHelper.RESP_PHOTO_DATA, IOUtils.readBytesFromStream(dr.getInputStream()));

dr = exchange.getOut().getAttachment(imageId);
Assert.assertEquals("image/jpeg", dr.getContentType());

BufferedImage image = ImageIO.read(dr.getInputStream());
Assert.assertEquals(560, image.getWidth());
Assert.assertEquals(300, image.getHeight());

You can also consume a Camel message received from a CXF endpoint in Payload mode. The CxfMtomConsumerPayloadModeTest illustrates how this works:

public static class MyProcessor implements Processor {

    @SuppressWarnings("unchecked")
    public void process(Exchange exchange) throws Exception {
        CxfPayload<SoapHeader> in = exchange.getIn().getBody(CxfPayload.class);

        // verify request
        Assert.assertEquals(1, in.getBody().size());

        Map<String, String> ns = new HashMap<String, String>();
        ns.put("ns", MtomTestHelper.SERVICE_TYPES_NS);
        ns.put("xop", MtomTestHelper.XOP_NS);

        XPathUtils xu = new XPathUtils(ns);
        Element body = new XmlConverter().toDOMElement(in.getBody().get(0));
        Element ele = (Element)xu.getValue("//ns:Detail/ns:photo/xop:Include", body,
                                           XPathConstants.NODE);
        String photoId = ele.getAttribute("href").substring(4); // skip "cid:"
        Assert.assertEquals(MtomTestHelper.REQ_PHOTO_CID, photoId);

        ele = (Element)xu.getValue("//ns:Detail/ns:image/xop:Include", body,
                                           XPathConstants.NODE);
        String imageId = ele.getAttribute("href").substring(4); // skip "cid:"
        Assert.assertEquals(MtomTestHelper.REQ_IMAGE_CID, imageId);

        DataHandler dr = exchange.getIn().getAttachment(photoId);
        Assert.assertEquals("application/octet-stream", dr.getContentType());
        MtomTestHelper.assertEquals(MtomTestHelper.REQ_PHOTO_DATA, IOUtils.readBytesFromStream(dr.getInputStream()));

        dr = exchange.getIn().getAttachment(imageId);
        Assert.assertEquals("image/jpeg", dr.getContentType());
        MtomTestHelper.assertEquals(MtomTestHelper.requestJpeg, IOUtils.readBytesFromStream(dr.getInputStream()));

        // create response
        List<Source> elements = new ArrayList<Source>();
        elements.add(new DOMSource(DOMUtils.readXml(new StringReader(MtomTestHelper.RESP_MESSAGE)).getDocumentElement()));
        CxfPayload<SoapHeader> sbody = new CxfPayload<SoapHeader>(new ArrayList<SoapHeader>(),
            elements, null);
        exchange.getOut().setBody(sbody);
        exchange.getOut().addAttachment(MtomTestHelper.RESP_PHOTO_CID,
            new DataHandler(new ByteArrayDataSource(MtomTestHelper.RESP_PHOTO_DATA, "application/octet-stream")));

        exchange.getOut().addAttachment(MtomTestHelper.RESP_IMAGE_CID,
            new DataHandler(new ByteArrayDataSource(MtomTestHelper.responseJpeg, "image/jpeg")));

    }
}

Raw Mode: Attachments are not supported as it does not process the message at all.

CXF_RAW Mode: MTOM is supported, and Attachments can be retrieved by Camel Message APIs mentioned above. Note that when receiving a multipart (i.e. MTOM) message the default SOAPMessage to String converter will provide the complete multipart payload on the body. If you require just the SOAP XML as a String, you can set the message body with message.getSOAPPart(), and Camel convert can do the rest of work for you.

The camel-cxf component now supports streaming of incoming messages when using PAYLOAD mode. Previously, the incoming messages would have been completely DOM parsed. For large messages, this is time consuming and uses a significant amount of memory. The incoming messages can remain as a javax.xml.transform.Source while being routed and, if nothing modifies the payload, can then be directly streamed out to the target destination. For common "simple proxy" use cases (example: from("cxf:…​").to("cxf:…​")), this can provide very significant performance increases as well as significantly lowered memory requirements.

However, there are cases where streaming may not be appropriate or desired. Due to the streaming nature, invalid incoming XML may not be caught until later in the processing chain. Also, certain actions may require the message to be DOM parsed anyway (like WS-Security or message tracing and such) in which case the advantages of the streaming is limited. At this point, there are two ways to control the streaming:

Global system property: you can add a system property of "org.apache.camel.component.cxf.streaming" to "false" to turn it off. That sets the global default, but setting the endpoint property above will override this value for that endpoint.

The camel-cxf component supports the generic CXF dispatch mode that can transport messages of arbitrary structures (i.e., not bound to a specific XML schema). To use this mode, you simply omit specifying the wsdlURL and serviceClass attributes of the CXF endpoint.

<cxf:cxfEndpoint id="testEndpoint" address="http://localhost:9000/SoapContext/SoapAnyPort">
     <cxf:properties>
       <entry key="dataFormat" value="PAYLOAD"/>
     </cxf:properties>
   </cxf:cxfEndpoint>

It is noted that the default CXF dispatch client does not send a specific SOAPAction header. Therefore, when the target service requires a specific SOAPAction value, it is supplied in the Camel header using the key SOAPAction (case-insensitive).

When using cxf with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-cxf-soap-starter</artifactId>
</dependency>

The component supports 13 options, which are listed below.