Chapter 35. Minio

35.1. Prerequisites

You must have valid credentials for authorized access to the buckets/folders. More information is available at Minio.

35.2. URI Format

minio://bucketName[?options]

The bucket will be created if it doesn’t already exist. You can append query options to the URI in the following format,

?options=value&option2=value&…

For example in order to read file hello.txt from the bucket helloBucket, use the following snippet:

from("minio://helloBucket?accessKey=yourAccessKey&secretKey=yourSecretKey&prefix=hello.txt")
  .to("file:/var/downloaded");

35.3. Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

35.3.1. Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

35.3.2. Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

35.4. Component Options

The Minio component supports 47 options, which are listed below.

Name	Description	Default	Type
autoCreateBucket (common)	Setting the autocreation of the bucket if bucket name not exist.	true	boolean
configuration (common)	The component configuration.		MinioConfiguration
customHttpClient (common)	Set custom HTTP client for authenticated access.		OkHttpClient
endpoint (common)	Endpoint can be an URL, domain name, IPv4 address or IPv6 address.		String
minioClient (common)	Autowired Reference to a Minio Client object in the registry.		MinioClient
objectLock (common)	Set when creating new bucket.	false	boolean
policy (common)	The policy for this queue to set in the method.		String
proxyPort (common)	TCP/IP port number. 80 and 443 are used as defaults for HTTP and HTTPS.		Integer
region (common)	The region in which Minio client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1). You’ll need to use the name Region.EU_WEST_1.id().		String
secure (common)	Flag to indicate to use secure connection to minio service or not.	false	boolean
serverSideEncryption (common)	Server-side encryption.		ServerSideEncryption
serverSideEncryptionCustomerKey (common)	Server-side encryption for source object while copy/move objects.		ServerSideEncryptionCustomerKey
autoCloseBody (consumer)	If this option is true and includeBody is true, then the MinioObject.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.	true	boolean
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
bypassGovernanceMode (consumer)	Set this flag if you want to bypassGovernanceMode when deleting a particular object.	false	boolean
deleteAfterRead (consumer)	Delete objects from Minio after they have been retrieved. The delete is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieve over and over again on the polls. Therefore you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the MinioConstants#BUCKET_NAME and MinioConstants#OBJECT_NAME headers, or only the MinioConstants#OBJECT_NAME header.	true	boolean
delimiter (consumer)	The delimiter which is used in the ListObjectsRequest to only consume objects we are interested in.		String
destinationBucketName (consumer)	Source bucket name.		String
destinationObjectName (consumer)	Source object name.		String
includeBody (consumer)	If it is true, the exchange body will be set to a stream to the contents of the file. If false, the headers will be set with the Minio object metadata, but the body will be null. This option is strongly related to autocloseBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.	true	boolean
includeFolders (consumer)	The flag which is used in the ListObjectsRequest to set include folders.	false	boolean
includeUserMetadata (consumer)	The flag which is used in the ListObjectsRequest to get objects with user meta data.	false	boolean
includeVersions (consumer)	The flag which is used in the ListObjectsRequest to get objects with versioning.	false	boolean
length (consumer)	Number of bytes of object data from offset.		long
matchETag (consumer)	Set match ETag parameter for get object(s).		String
maxConnections (consumer)	Set the maxConnections parameter in the minio client configuration.	60	int
maxMessagesPerPoll (consumer)	Gets the maximum number of messages as a limit to poll at each polling. Gets the maximum number of messages as a limit to poll at each polling. The default value is 10. Use 0 or a negative number to set it as unlimited.	10	int
modifiedSince (consumer)	Set modified since parameter for get object(s).		ZonedDateTime
moveAfterRead (consumer)	Move objects from bucket to a different bucket after they have been retrieved. To accomplish the operation the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.	false	boolean
notMatchETag (consumer)	Set not match ETag parameter for get object(s).		String
objectName (consumer)	To get the object from the bucket with the given object name.		String
offset (consumer)	Start byte position of object data.		long
prefix (consumer)	Object name starts with prefix.		String
recursive (consumer)	List recursively than directory structure emulation.	false	boolean
startAfter (consumer)	list objects in bucket after this object name.		String
unModifiedSince (consumer)	Set un modified since parameter for get object(s).		ZonedDateTime
useVersion1 (consumer)	when true, version 1 of REST API is used.	false	boolean
versionId (consumer)	Set specific version_ID of a object when deleting the object.		String
deleteAfterWrite (producer)	Delete file object after the Minio file has been uploaded.	false	boolean
keyName (producer)	Setting the key name for an element in the bucket through endpoint parameter.		String
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
operation (producer)	The operation to do in case the user don’t want to do only an upload. Enum values: copyObject listObjects deleteObject deleteObjects deleteBucket listBuckets getObject getObjectRange		MinioOperations
pojoRequest (producer)	If we want to use a POJO request as body or not.	false	boolean
storageClass (producer)	The storage class to set in the request.		String
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
accessKey (security)	Amazon AWS Secret Access Key or Minio Access Key. If not set camel will connect to service for anonymous access.		String
secretKey (security)	Amazon AWS Access Key Id or Minio Secret Key. If not set camel will connect to service for anonymous access.		String

35.5. Endpoint Options

The Minio endpoint is configured using URI syntax:

minio:bucketName

with the following path and query parameters:

35.5.1. Path Parameters (1 parameters)

Name	Description	Default	Type
bucketName (common)	Required Bucket name.		String

35.5.2. Query Parameters (63 parameters)

Name	Description	Default	Type
autoCreateBucket (common)	Setting the autocreation of the bucket if bucket name not exist.	true	boolean
customHttpClient (common)	Set custom HTTP client for authenticated access.		OkHttpClient
endpoint (common)	Endpoint can be an URL, domain name, IPv4 address or IPv6 address.		String
minioClient (common)	Autowired Reference to a Minio Client object in the registry.		MinioClient
objectLock (common)	Set when creating new bucket.	false	boolean
policy (common)	The policy for this queue to set in the method.		String
proxyPort (common)	TCP/IP port number. 80 and 443 are used as defaults for HTTP and HTTPS.		Integer
region (common)	The region in which Minio client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1). You’ll need to use the name Region.EU_WEST_1.id().		String
secure (common)	Flag to indicate to use secure connection to minio service or not.	false	boolean
serverSideEncryption (common)	Server-side encryption.		ServerSideEncryption
serverSideEncryptionCustomerKey (common)	Server-side encryption for source object while copy/move objects.		ServerSideEncryptionCustomerKey
autoCloseBody (consumer)	If this option is true and includeBody is true, then the MinioObject.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.	true	boolean
bypassGovernanceMode (consumer)	Set this flag if you want to bypassGovernanceMode when deleting a particular object.	false	boolean
deleteAfterRead (consumer)	Delete objects from Minio after they have been retrieved. The delete is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieve over and over again on the polls. Therefore you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the MinioConstants#BUCKET_NAME and MinioConstants#OBJECT_NAME headers, or only the MinioConstants#OBJECT_NAME header.	true	boolean
delimiter (consumer)	The delimiter which is used in the ListObjectsRequest to only consume objects we are interested in.		String
destinationBucketName (consumer)	Source bucket name.		String
destinationObjectName (consumer)	Source object name.		String
includeBody (consumer)	If it is true, the exchange body will be set to a stream to the contents of the file. If false, the headers will be set with the Minio object metadata, but the body will be null. This option is strongly related to autocloseBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.	true	boolean
includeFolders (consumer)	The flag which is used in the ListObjectsRequest to set include folders.	false	boolean
includeUserMetadata (consumer)	The flag which is used in the ListObjectsRequest to get objects with user meta data.	false	boolean
includeVersions (consumer)	The flag which is used in the ListObjectsRequest to get objects with versioning.	false	boolean
length (consumer)	Number of bytes of object data from offset.		long
matchETag (consumer)	Set match ETag parameter for get object(s).		String
maxConnections (consumer)	Set the maxConnections parameter in the minio client configuration.	60	int
maxMessagesPerPoll (consumer)	Gets the maximum number of messages as a limit to poll at each polling. Gets the maximum number of messages as a limit to poll at each polling. The default value is 10. Use 0 or a negative number to set it as unlimited.	10	int
modifiedSince (consumer)	Set modified since parameter for get object(s).		ZonedDateTime
moveAfterRead (consumer)	Move objects from bucket to a different bucket after they have been retrieved. To accomplish the operation the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.	false	boolean
notMatchETag (consumer)	Set not match ETag parameter for get object(s).		String
objectName (consumer)	To get the object from the bucket with the given object name.		String
offset (consumer)	Start byte position of object data.		long
prefix (consumer)	Object name starts with prefix.		String
recursive (consumer)	List recursively than directory structure emulation.	false	boolean
sendEmptyMessageWhenIdle (consumer)	If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.	false	boolean
startAfter (consumer)	list objects in bucket after this object name.		String
unModifiedSince (consumer)	Set un modified since parameter for get object(s).		ZonedDateTime
useVersion1 (consumer)	when true, version 1 of REST API is used.	false	boolean
versionId (consumer)	Set specific version_ID of a object when deleting the object.		String
bridgeErrorHandler (consumer (advanced))	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
exceptionHandler (consumer (advanced))	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer (advanced))	Sets the exchange pattern when the consumer creates an exchange. Enum values: InOnly InOut InOptionalOut		ExchangePattern
pollStrategy (consumer (advanced))	A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.		PollingConsumerPollStrategy
deleteAfterWrite (producer)	Delete file object after the Minio file has been uploaded.	false	boolean
keyName (producer)	Setting the key name for an element in the bucket through endpoint parameter.		String
operation (producer)	The operation to do in case the user don’t want to do only an upload. Enum values: copyObject listObjects deleteObject deleteObjects deleteBucket listBuckets getObject getObjectRange		MinioOperations
pojoRequest (producer)	If we want to use a POJO request as body or not.	false	boolean
storageClass (producer)	The storage class to set in the request.		String
lazyStartProducer (producer (advanced))	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
backoffErrorThreshold (scheduler)	The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.		int
backoffIdleThreshold (scheduler)	The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.		int
backoffMultiplier (scheduler)	To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.		int
delay (scheduler)	Milliseconds before the next poll.	500	long
greedy (scheduler)	If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.	false	boolean
initialDelay (scheduler)	Milliseconds before the first poll starts.	1000	long
repeatCount (scheduler)	Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.	0	long
runLoggingLevel (scheduler)	The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. Enum values: TRACE DEBUG INFO WARN ERROR OFF	TRACE	LoggingLevel
scheduledExecutorService (scheduler)	Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.		ScheduledExecutorService
scheduler (scheduler)	To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler.	none	Object
schedulerProperties (scheduler)	To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.		Map
startScheduler (scheduler)	Whether the scheduler should be auto started.	true	boolean
timeUnit (scheduler)	Time unit for initialDelay and delay options. Enum values: NANOSECONDS MICROSECONDS MILLISECONDS SECONDS MINUTES HOURS DAYS	MILLISECONDS	TimeUnit
useFixedDelay (scheduler)	Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.	true	boolean
accessKey (security)	Amazon AWS Secret Access Key or Minio Access Key. If not set camel will connect to service for anonymous access.		String
secretKey (security)	Amazon AWS Access Key Id or Minio Secret Key. If not set camel will connect to service for anonymous access.		String

You have to provide the minioClient in the Registry or your accessKey and secretKey to access the Minio.

35.6. Batch Consumer

This component implements the Batch Consumer.

This allows you for instance to know how many messages exists in this batch and for instance let the Aggregator aggregate this number of messages.

35.7. Message Headers

The Minio component supports 21 message header(s), which is/are listed below:

Name	Description	Type
CamelMinioBucketName (common) Constant: BUCKET_NAME	Producer: The bucket Name which this object will be stored or which will be used for the current operation. Consumer: The name of the bucket in which this object is contained.	String
CamelMinioDestinationBucketName (producer) Constant: DESTINATION_BUCKET_NAME	The bucket Destination Name which will be used for the current operation.	String
CamelMinioContentControl (common) Constant: CACHE_CONTROL	Producer: The content control of this object. Consumer: The optional Cache-Control HTTP header which allows the user to specify caching behavior along the HTTP request/reply chain.	String
CamelMinioContentDisposition (common) Constant: CONTENT_DISPOSITION	Producer: The content disposition of this object. Consumer: The optional Content-Disposition HTTP header, which specifies presentational information such as the recommended filename for the object to be saved as.	String
CamelMinioContentEncoding (common) Constant: CONTENT_ENCODING	Producer: The content encoding of this object. Consumer: The optional Content-Encoding HTTP header specifying what content encodings have been applied to the object and what decoding mechanisms must be applied in order to obtain the media-type referenced by the Content-Type field.	String
CamelMinioContentLength (common) Constant: CONTENT_LENGTH	Producer: The content length of this object. Consumer: The Content-Length HTTP header indicating the size of the associated object in bytes.	Long
CamelMinioContentMD5 (common) Constant: CONTENT_MD5	Producer: The md5 checksum of this object. Consumer: The base64 encoded 128-bit MD5 digest of the associated object (content - not including headers) according to RFC 1864. This data is used as a message integrity check to verify that the data received by Minio is the same data that the caller sent.	String
CamelMinioContentType (common) Constant: CONTENT_TYPE	Producer: The content type of this object. Consumer: The Content-Type HTTP header, which indicates the type of content stored in the associated object. The value of this header is a standard MIME type.	String
CamelMinioETag (common) Constant: E_TAG	Producer: The ETag value for the newly uploaded object. Consumer: The hex encoded 128-bit MD5 digest of the associated object according to RFC 1864. This data is used as an integrity check to verify that the data received by the caller is the same data that was sent by Minio.	String
CamelMinioObjectName (common) Constant: OBJECT_NAME	Producer: The key under which this object will be stored or which will be used for the current operation. Consumer: The key under which this object is stored.	String
CamelMinioDestinationObjectName (producer) Constant: DESTINATION_OBJECT_NAME	The Destination key which will be used for the current operation.	String
CamelMinioLastModified (common) Constant: LAST_MODIFIED	Producer: The last modified timestamp of this object. Consumer: The value of the Last-Modified header, indicating the date and time at which Minio last recorded a modification to the associated object.	Date
CamelMinioStorageClass (producer) Constant: STORAGE_CLASS	The storage class of this object.	String
CamelMinioVersionId (common) Constant: VERSION_ID	Producer: The version Id of the object to be stored or returned from the current operation. Consumer: The version ID of the associated Minio object if available. Version IDs are only assigned to objects when an object is uploaded to an Minio bucket that has object versioning enabled.	String
CamelMinioCannedAcl (producer) Constant: CANNED_ACL	The canned acl that will be applied to the object. see com.amazonaws.services.s3.model.CannedAccessControlList for allowed values.	String
CamelMinioOperation (producer) Constant: MINIO_OPERATION	The operation to perform. Enum values: copyObject listObjects deleteObject deleteObjects deleteBucket listBuckets getObject getPartialObject	MinioOperations
CamelMinioServerSideEncryption (common) Constant: SERVER_SIDE_ENCRYPTION	Producer: Sets the server-side encryption algorithm when encrypting the object using Minio-managed keys. For example use AES256. Consumer: The server-side encryption algorithm when encrypting the object using Minio-managed keys.	String
CamelMinioExpirationTime (common) Constant: EXPIRATION_TIME	The expiration time.	String
CamelMinioReplicationStatus (common) Constant: REPLICATION_STATUS	The replication status.	String
CamelMinioOffset (producer) Constant: OFFSET	The offset.	String
CamelMinioLength (producer) Constant: LENGTH	The length.	String

35.7.1. Minio Producer operations

Camel-Minio component provides the following operation on the producer side:

copyObject
deleteObject
deleteObjects
listBuckets
deleteBucket
listObjects
getObject (this will return a MinioObject instance)
getObjectRange (this will return a MinioObject instance)

35.7.2. Advanced Minio configuration

If your Camel Application is running behind a firewall or if you need to have more control over the MinioClient instance configuration, you can create your own instance and refer to it in your Camel minio component configuration:

from("minio://MyBucket?minioClient=#client&delay=5000&maxMessagesPerPoll=5")
.to("mock:result");

35.7.3. Minio Producer Operation examples

CopyObject: this operation copy an object from one bucket to a different one

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(MinioConstants.DESTINATION_BUCKET_NAME, "camelDestinationBucket");
          exchange.getIn().setHeader(MinioConstants.OBJECT_NAME, "camelKey");
          exchange.getIn().setHeader(MinioConstants.DESTINATION_OBJECT_NAME, "camelDestinationKey");
      }
  })
  .to("minio://mycamelbucket?minioClient=#minioClient&operation=copyObject")
  .to("mock:result");

This operation will copy the object with the name expressed in the header camelDestinationKey to the camelDestinationBucket bucket, from the bucket mycamelbucket.

DeleteObject: this operation deletes an object from a bucket

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(MinioConstants.OBJECT_NAME, "camelKey");
      }
  })
  .to("minio://mycamelbucket?minioClient=#minioClient&operation=deleteObject")
  .to("mock:result");

This operation will delete the object camelKey from the bucket mycamelbucket.

ListBuckets: this operation list the buckets for this account in this region

  from("direct:start")
  .to("minio://mycamelbucket?minioClient=#minioClient&operation=listBuckets")
  .to("mock:result");

This operation will list the buckets for this account

DeleteBucket: this operation delete the bucket specified as URI parameter or header

  from("direct:start")
  .to("minio://mycamelbucket?minioClient=#minioClient&operation=deleteBucket")
  .to("mock:result");

This operation will delete the bucket mycamelbucket

ListObjects: this operation list object in a specific bucket

  from("direct:start")
  .to("minio://mycamelbucket?minioClient=#minioClient&operation=listObjects")
  .to("mock:result");

This operation will list the objects in the mycamelbucket bucket

GetObject: this operation get a single object in a specific bucket

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(MinioConstants.OBJECT_NAME, "camelKey");
      }
  })
  .to("minio://mycamelbucket?minioClient=#minioClient&operation=getObject")
  .to("mock:result");

This operation will return an MinioObject instance related to the camelKey object in mycamelbucket bucket.

GetObjectRange: this operation get a single object range in a specific bucket

  from("direct:start").process(new Processor() {

      @Override
      public void process(Exchange exchange) throws Exception {
          exchange.getIn().setHeader(MinioConstants.OBJECT_NAME, "camelKey");
          exchange.getIn().setHeader(MinioConstants.OFFSET, "0");
          exchange.getIn().setHeader(MinioConstants.LENGTH, "9");
      }
  })
  .to("minio://mycamelbucket?minioClient=#minioClient&operation=getObjectRange")
  .to("mock:result");

This operation will return an MinioObject instance related to the camelKey object in mycamelbucket bucket, containing bytes from 0 to 9.

35.8. Bucket Autocreation

With the option autoCreateBucket users are able to avoid the autocreation of a Minio Bucket in case it doesn’t exist. The default for this option is true. If set to false any operation on a not-existent bucket in Minio won’t be successful, and an error will be returned.

35.9. Automatic detection of Minio client in registry

The component is capable of detecting the presence of a Minio bean into the registry. If it’s the only instance of that type it will be used as client, and you won’t have to define it as uri parameter, like the example above. This may be really useful for smarter configuration of the endpoint.

35.10. Moving stuff between a bucket and another bucket

Some users like to consume stuff from a bucket and move the content in a different one without using the copyObject feature of this component. If this is case for you, don’t forget to remove the bucketName header from the incoming exchange of the consumer, otherwise the file will always be overwritten on the same original bucket.

35.11. MoveAfterRead consumer option

In addition to deleteAfterRead it has been added another option, moveAfterRead. With this option enabled the consumed object will be moved to a target destinationBucket instead of being only deleted. This will require specifying the destinationBucket option. As example:

  from("minio://mycamelbucket?minioClient=#minioClient&moveAfterRead=true&destinationBucketName=myothercamelbucket")
  .to("mock:result");

In this case the objects consumed will be moved to myothercamelbucket bucket and deleted from the original one (because of deleteAfterRead set to true as default).

35.12. Using a POJO as body

Sometimes build a Minio Request can be complex, because of multiple options. We introduce the possibility to use a POJO as body. In Minio there are multiple operations you can submit, as an example for List brokers request, you can do something like:

from("direct:minio")
     .setBody(ListObjectsArgs.builder()
                    .bucket(bucketName)
                    .recursive(getConfiguration().isRecursive())))
     .to("minio://test?minioClient=#minioClient&operation=listObjects&pojoRequest=true")

In this way you’ll pass the request directly without the need of passing headers and options specifically related to this operation.

35.13. Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-minio</artifactId>
    <version>${camel-version}</version>
</dependency>

where $3.14.2 must be replaced by the actual version of Camel.

35.14. Spring Boot Auto-Configuration

When using minio with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-minio-starter</artifactId>
</dependency>

The component supports 48 options, which are listed below.

Name	Description	Default	Type
camel.component.minio.access-key	Amazon AWS Secret Access Key or Minio Access Key. If not set camel will connect to service for anonymous access.		String
camel.component.minio.auto-close-body	If this option is true and includeBody is true, then the MinioObject.close() method will be called on exchange completion. This option is strongly related to includeBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.	true	Boolean
camel.component.minio.auto-create-bucket	Setting the autocreation of the bucket if bucket name not exist.	true	Boolean
camel.component.minio.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.minio.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.minio.bypass-governance-mode	Set this flag if you want to bypassGovernanceMode when deleting a particular object.	false	Boolean
camel.component.minio.configuration	The component configuration. The option is a org.apache.camel.component.minio.MinioConfiguration type.		MinioConfiguration
camel.component.minio.custom-http-client	Set custom HTTP client for authenticated access. The option is a okhttp3.OkHttpClient type.		OkHttpClient
camel.component.minio.delete-after-read	Delete objects from Minio after they have been retrieved. The delete is only performed if the Exchange is committed. If a rollback occurs, the object is not deleted. If this option is false, then the same objects will be retrieve over and over again on the polls. Therefore you need to use the Idempotent Consumer EIP in the route to filter out duplicates. You can filter using the MinioConstants#BUCKET_NAME and MinioConstants#OBJECT_NAME headers, or only the MinioConstants#OBJECT_NAME header.	true	Boolean
camel.component.minio.delete-after-write	Delete file object after the Minio file has been uploaded.	false	Boolean
camel.component.minio.delimiter	The delimiter which is used in the ListObjectsRequest to only consume objects we are interested in.		String
camel.component.minio.destination-bucket-name	Source bucket name.		String
camel.component.minio.destination-object-name	Source object name.		String
camel.component.minio.enabled	Whether to enable auto configuration of the minio component. This is enabled by default.		Boolean
camel.component.minio.endpoint	Endpoint can be an URL, domain name, IPv4 address or IPv6 address.		String
camel.component.minio.include-body	If it is true, the exchange body will be set to a stream to the contents of the file. If false, the headers will be set with the Minio object metadata, but the body will be null. This option is strongly related to autocloseBody option. In case of setting includeBody to true and autocloseBody to false, it will be up to the caller to close the MinioObject stream. Setting autocloseBody to true, will close the MinioObject stream automatically.	true	Boolean
camel.component.minio.include-folders	The flag which is used in the ListObjectsRequest to set include folders.	false	Boolean
camel.component.minio.include-user-metadata	The flag which is used in the ListObjectsRequest to get objects with user meta data.	false	Boolean
camel.component.minio.include-versions	The flag which is used in the ListObjectsRequest to get objects with versioning.	false	Boolean
camel.component.minio.key-name	Setting the key name for an element in the bucket through endpoint parameter.		String
camel.component.minio.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.minio.length	Number of bytes of object data from offset.		Long
camel.component.minio.match-e-tag	Set match ETag parameter for get object(s).		String
camel.component.minio.max-connections	Set the maxConnections parameter in the minio client configuration.	60	Integer
camel.component.minio.max-messages-per-poll	Gets the maximum number of messages as a limit to poll at each polling. Gets the maximum number of messages as a limit to poll at each polling. The default value is 10. Use 0 or a negative number to set it as unlimited.	10	Integer
camel.component.minio.minio-client	Reference to a Minio Client object in the registry. The option is a io.minio.MinioClient type.		MinioClient
camel.component.minio.modified-since	Set modified since parameter for get object(s). The option is a java.time.ZonedDateTime type.		ZonedDateTime
camel.component.minio.move-after-read	Move objects from bucket to a different bucket after they have been retrieved. To accomplish the operation the destinationBucket option must be set. The copy bucket operation is only performed if the Exchange is committed. If a rollback occurs, the object is not moved.	false	Boolean
camel.component.minio.not-match-e-tag	Set not match ETag parameter for get object(s).		String
camel.component.minio.object-lock	Set when creating new bucket.	false	Boolean
camel.component.minio.object-name	To get the object from the bucket with the given object name.		String
camel.component.minio.offset	Start byte position of object data.		Long
camel.component.minio.operation	The operation to do in case the user don’t want to do only an upload.		MinioOperations
camel.component.minio.pojo-request	If we want to use a POJO request as body or not.	false	Boolean
camel.component.minio.policy	The policy for this queue to set in the method.		String
camel.component.minio.prefix	Object name starts with prefix.		String
camel.component.minio.proxy-port	TCP/IP port number. 80 and 443 are used as defaults for HTTP and HTTPS.		Integer
camel.component.minio.recursive	List recursively than directory structure emulation.	false	Boolean
camel.component.minio.region	The region in which Minio client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1). You’ll need to use the name Region.EU_WEST_1.id().		String
camel.component.minio.secret-key	Amazon AWS Access Key Id or Minio Secret Key. If not set camel will connect to service for anonymous access.		String
camel.component.minio.secure	Flag to indicate to use secure connection to minio service or not.	false	Boolean
camel.component.minio.server-side-encryption	Server-side encryption. The option is a io.minio.ServerSideEncryption type.		ServerSideEncryption
camel.component.minio.server-side-encryption-customer-key	Server-side encryption for source object while copy/move objects. The option is a io.minio.ServerSideEncryptionCustomerKey type.		ServerSideEncryptionCustomerKey
camel.component.minio.start-after	list objects in bucket after this object name.		String
camel.component.minio.storage-class	The storage class to set in the request.		String
camel.component.minio.un-modified-since	Set un modified since parameter for get object(s). The option is a java.time.ZonedDateTime type.		ZonedDateTime
camel.component.minio.use-version1	when true, version 1 of REST API is used.	false	Boolean
camel.component.minio.version-id	Set specific version_ID of a object when deleting the object.		String