Chapter 7. Replacing Storage Devices

Procedure

1. Identify the OSD that needs to be replaced and the OpenShift Container Platform node that has the OSD scheduled on it.

   # oc get -n openshift-storage pods -l app=rook-ceph-osd -o wide

   Example output:

   rook-ceph-osd-0-86bf8cdc8-4nb5t   0/1     crashLoopBackOff   0   24h   10.129.2.26     worker-0     <none>       <none>
   rook-ceph-osd-1-7c99657cfb-jdzvz   1/1     Running   0          24h     10.128.2.46     worker-1     <none>       <none>
   rook-ceph-osd-2-5f9f6dfb5b-2mnw9    1/1     Running   0          24h     10.131.0.33    worker-2     <none>       <none>

   In this example, rook-ceph-osd-0-86bf8cdc8-4nb5t needs to be replaced and worker-0 is the RHOCP node on which the OSD is scheduled.

   Note

   If the OSD to be replaced is healthy, the status of the pod will be Running.

2. Scale down the OSD deployment for the OSD to be replaced.

   # osd_id_to_remove=0
   # oc scale -n openshift-storage deployment rook-ceph-osd-${osd_id_to_remove} --replicas=0

   where osd_id_to_remove is the integer in the pod name immediately after the rook-ceph-osd prefix. In this example, the deployment name is rook-ceph-osd-0.

   Example output:

   deployment.apps/rook-ceph-osd-0 scaled

3. Verify that the rook-ceph-osd pod is terminated.

   # oc get -n openshift-storage pods -l ceph-osd-id=${osd_id_to_remove}

   Example output:

   No resources found in openshift-storage namespace.

   Note

   If the rook-ceph-osd pod is in terminating state, use the force option to delete the pod.

   # oc delete pod rook-ceph-osd-0-86bf8cdc8-4nb5t --grace-period=0 --force

   Example output:

   warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
     pod "rook-ceph-osd-0-86bf8cdc8-4nb5t" force deleted

4. Remove the old OSD from the cluster so that a new OSD can be added.

   1. Identify the DeviceSet associated with the OSD to be replaced.

      # oc get -n openshift-storage -o yaml deployment rook-ceph-osd-${osd_id_to_remove} | grep ceph.rook.io/pvc

      Example output:

      ceph.rook.io/pvc: ocs-deviceset-localblock-0-data-0-64xjl
          ceph.rook.io/pvc: ocs-deviceset-localblock-0-data-0-64xjl

      In this example, the PVC name is ocs-deviceset-localblock-0-data-0-64xjl.

   2. Remove the old OSD from the cluster

      # oc process -n openshift-storage ocs-osd-removal -p FAILED_OSD_IDS=${osd_id_to_remove} | oc -n openshift-storage create -f -

      Example Output:

      job.batch/ocs-osd-removal-0 created

      Warning

      This step results in OSD being completely removed from the cluster. Make sure that the correct value of osd_id_to_remove is provided.

5. Verify that the OSD is removed successfully by checking the status of the ocs-osd-removal pod. A status of Completed confirms that the OSD removal job completed successfully.

   # oc get pod -l job-name=ocs-osd-removal-${osd_id_to_remove} -n openshift-storage

   Note

   If ocs-osd-removal fails and the pod is not in the expected Completed state, check the pod logs for further debugging. For example:

   # oc logs ${osd_id_to_remove} -n openshift-storage --tail=-1

6. Delete the persistent volume claim (PVC) resources associated with the OSD to be replaced.

   1. Identify the PV associated with the PVC.

      # oc get -n openshift-storage pvc ocs-deviceset-<x>-<y>-<pvc-suffix>

      where, x, y, and pvc-suffix are the values in the DeviceSet identified in an step 4(a).

      Example output:

      NAME                      STATUS        VOLUME        CAPACITY   ACCESS MODES   STORAGECLASS   AGE
      ocs-deviceset-localblock-0-data-0-64xjl   Bound    local-pv-8137c873    256Gi      RWO     localblock     24h

      In this example, the associated PV is local-pv-8137c873.

   2. Identify the name of the device to be replaced.

      # oc get pv local-pv-<pv-suffix> -o yaml | grep path

      where, pv-suffix is the value in the PV name identified in an earlier step.

      Example output:

      path: /mnt/local-storage/localblock/vdc

      In this example, the device name is vdc.

   3. Identify the prepare-pod associated with the OSD to be replaced.

      # oc describe -n openshift-storage pvc ocs-deviceset-<x>-<y>-<pvc-suffix> | grep Mounted

      where, x, y, and pvc-suffix are the values in the DeviceSet identified in an earlier step.

      Example output:

      Mounted By:    rook-ceph-osd-prepare-ocs-deviceset-localblock-0-data-0-64knzkc

      In this example the prepare-pod name is rook-ceph-osd-prepare-ocs-deviceset-localblock-0-data-0-64knzkc.

   4. Delete the osd-prepare pod before removing the associated PVC.

      # oc delete -n openshift-storage pod rook-ceph-osd-prepare-ocs-deviceset-<x>-<y>-<pvc-suffix>-<pod-suffix>

      where, x, y, pvc-suffix, and pod-suffix are the values in the osd-prepare pod name identified in an earlier step.

      Example output:

      pod "rook-ceph-osd-prepare-ocs-deviceset-localblock-0-data-0-64knzkc" deleted

   5. Delete the PVC associated with the OSD to be replaced.

      # oc delete -n openshift-storage pvc ocs-deviceset-<x>-<y>-<pvc-suffix>

      where, x, y, and pvc-suffix are the values in the DeviceSet identified in an earlier step.

      Example output:

      persistentvolumeclaim "ocs-deviceset-localblock-0-data-0-64xjl" deleted

7. Replace the old device and use the new device to create a new OpenShift Container Platform PV.

   1. Log in to OpenShift Container Platform node with the device to be replaced. In this example, the OpenShift Container Platform node is worker-0.

      # oc debug node/worker-0

      Example output:

      Starting pod/worker-0-debug ...
      To use host binaries, run `chroot /host`
      Pod IP: 192.168.88.21
      If you don't see a command prompt, try pressing enter.
      # chroot /host

   2. Record the /dev/disk that is to be replaced using the device name, vdc, identified earlier.

      # ls -alh /mnt/local-storage/localblock

      Example output:

      total 0
      drwxr-xr-x. 2 root root 17 Nov  18 15:23 .
      drwxr-xr-x. 3 root root 24 Nov  18 15:23 ..
      lrwxrwxrwx. 1 root root  8 Nov  18 15:23 vdc -> /dev/vdc

   3. Find the name of the LocalVolumeSet CR, and remove or comment out the device /dev/disk that is to be replaced.

      # oc get -n openshift-local-storage localvolumeset
      NAME          AGE
      localblock   25h

8. Log in to OpenShift Container Platform node with the device to be replaced and remove the old symlink.

   # oc debug node/worker-0

   Example output:

   Starting pod/worker-0-debug ...
   To use host binaries, run `chroot /host`
   Pod IP: 192.168.88.21
   If you don't see a command prompt, try pressing enter.
   # chroot /host

   1. Identify the old symlink for the device name to be replaced. In this example, the device name is vdc.

      # ls -alh /mnt/local-storage/localblock

      Example output:

      total 0
      drwxr-xr-x. 2 root root 17 Nov  18 15:23 .
      drwxr-xr-x. 3 root root 24 Nov  18 15:23 ..
      lrwxrwxrwx. 1 root root  8 Nov  18 15:23 vdc -> /dev/vdc

   2. Remove the symlink.

      # rm /mnt/local-storage/localblock/vdc

   3. Verify that the symlink is removed.

      # ls -alh /mnt/local-storage/localblock

      Example output:

      total 0
      drwxr-xr-x. 2 root root 6 Nov 18 17:11 .
      drwxr-xr-x. 3 root root 24 Nov 18 15:23 ..

      Important

      For new deployments of OpenShift Container Storage 4.5 or later, LVM is not in use, ceph-volume raw mode is in play instead. Therefore, additional validation is not needed and you can proceed to the next step.

9. Delete the PV associated with the device to be replaced, which was identified in earlier steps. In this example, the PV name is local-pv-8137c873.

   # oc delete pv local-pv-8137c873

   Example output:

   persistentvolume "local-pv-8137c873" deleted

10. Replace the device with the new device.

11. Log back into the correct OpenShift Cotainer Platform node and identify the device name for the new drive. The device name must change unless you are reseating the same device.

    # lsblk

    Example output:

    NAME                         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
    vda                          252:0    0   40G  0 disk
    |-vda1                       252:1    0    4M  0 part
    |-vda2                       252:2    0  384M  0 part /boot
    `-vda4                       252:4    0 39.6G  0 part
      `-coreos-luks-root-nocrypt 253:0    0 39.6G  0 dm   /sysroot
    vdb                          252:16   0  512B  1 disk
    vdd                          252:32   0  256G  0 disk

    In this example, the new device name is vdd.

12. After the new /dev/disk is available ,it will be auto detected by localvolumeset.

13. Verify that there is a new PV in Available state and of the correct size.

    # oc get pv | grep 256Gi

    Example output:

    local-pv-1e31f771   256Gi   RWO    Delete  Bound  openshift-storage/ocs-deviceset-localblock-2-data-0-6xhkf   localblock    24h
    local-pv-ec7f2b80   256Gi   RWO    Delete  Bound  openshift-storage/ocs-deviceset-localblock-1-data-0-hr2fx   localblock    24h
    local-pv-8137c873   256Gi   RWO    Delete  Available                                                          localblock    32m

14. Create new OSD for new device.

    1. Deploy the new OSD by restarting the rook-ceph-operator to force operator reconciliation.

       1. Identify the name of the rook-ceph-operator.

          # oc get -n openshift-storage pod -l app=rook-ceph-operator

          Example output:

          NAME                                  READY   STATUS    RESTARTS   AGE
          rook-ceph-operator-85f6494db4-sg62v   1/1     Running   0          1d20h

       2. Delete the rook-ceph-operator.

          # oc delete -n openshift-storage pod rook-ceph-operator-85f6494db4-sg62v

          Example output:

          pod "rook-ceph-operator-85f6494db4-sg62v" deleted

          In this example, the rook-ceph-operator pod name is rook-ceph-operator-85f6494db4-sg62v.

       3. Verify that the rook-ceph-operator pod is restarted.

          # oc get -n openshift-storage pod -l app=rook-ceph-operator

          Example output:

          NAME                                  READY   STATUS    RESTARTS   AGE
          rook-ceph-operator-85f6494db4-wx9xx   1/1     Running   0          50s

          Creation of the new OSD may take several minutes after the operator restarts.