Chapter 3. OpenShift Data Foundation operators
Red Hat OpenShift Data Foundation is comprised of the following three Operator Lifecycle Manager (OLM) operator bundles, deploying four operators which codify administrative tasks and custom resources so that task and resource characteristics can be easily automated:
OpenShift Data Foundation
-
odf-operator
-
OpenShift Container Storage
-
ocs-operator -
rook-ceph-operator
-
Multicloud Object Gateway
-
mcg-operator
-
Administrators define the desired end state of the cluster, and the OpenShift Data Foundation operators ensure the cluster is either in that state or approaching that state, with minimal administrator intervention.
3.1. OpenShift Data Foundation operator
The odf-operator can be described as a "meta" operator for OpenShift Data Foundation, that is, an operator meant to influence other operators.
The odf-operator has the following primary functions:
Enforces the configuration and versioning of the other operators that comprise OpenShift Data Foundation. It does this by using two primary mechanisms: operator dependencies and Subscription management.
-
The
odf-operatorbundle specifies dependencies on other OLM operators to make sure they are always installed at specific versions. - The operator itself manages the Subscriptions for all other operators to make sure the desired versions of those operators are available for installation by the OLM.
-
The
- Provides the OpenShift Data Foundation external plugin for the OpenShift Console.
- Provides an API to integrate storage solutions with the OpenShift Console.
3.1.1. Components
The odf-operator has a dependency on the ocs-operator package. It also manages the Subscription of the mcg-operator. In addition, the odf-operator bundle defines a second Deployment for the OpenShift Data Foundation external plugin for the OpenShift Console. This defines an nginx-based Pod that serves the necessary files to register and integrate OpenShift Data Foundation dashboards directly into the OpenShift Container Platform Console.
3.1.2. Design diagram
This diagram illustrates how odf-operator is integrated with the OpenShift Container Platform.
Figure 3.1. OpenShift Data Foundation Operator
3.1.3. Responsibilites
The odf-operator defines the following CRD:
-
StorageSystem
The StorageSystem CRD represents an underlying storage system that provides data storage and services for OpenShift Container Platform. It triggers the operator to ensure the existence of a Subscription for a given Kind of storage system.
3.1.4. Resources
The ocs-operator creates the following CRs in response to the spec of a given StorageSystem.
Operator Lifecycle Manager Resources
Creates a Subscription for the operator which defines and reconciles the given StorageSystem’s Kind.
3.1.5. Limitation
The odf-operator does not provide any data storage or services itself. It exists as an integration and management layer for other storage systems.
3.1.6. High availability
High availability is not a primary requirement for the odf-operator Pod similar to most of the other operators. In general, there are no operations that require or benefit from process distribution. OpenShift Container Platform quickly spins up a replacement Pod whenever the current Pod becomes unavailable or is deleted.
3.1.7. Relevant config files
The odf-operator comes with a ConfigMap of variables that can be used to modify the behavior of the operator.
3.1.8. Relevant log files
To get an understanding of the OpenShift Data Foundation and troubleshoot issues, you can look at the following:
- Operator Pod logs
-
StorageSystemstatus - Underlying storage system CRD statuses
Operator Pod logs
Each operator provides standard Pod logs that include information about reconciliation and errors encountered. These logs often have information about successful reconciliation which can be filtered out and ignored.
StorageSystem status and events
The StorageSystem CR stores the reconciliation details in the status of the CR and has associated events. The spec of the StorageSystem contains the name, namespace, and Kind of the actual storage system’s CRD, which the administrator can use to find further information on the status of the storage system.
3.1.9. Lifecycle
The odf-operator is required to be present as long as the OpenShift Data Foundation bundle remains installed. This is managed as part of OLM’s reconciliation of the OpenShift Data Foundation CSV. At least one instance of the pod should be in Ready state.
The operator operands such as CRDs should not affect the lifecycle of the operator. The creation and deletion of StorageSystems is an operation outside the operator’s control and must be initiated by the administrator or automated with the appropriate application programming interface (API) calls.
3.2. OpenShift Container Storage operator
The ocs-operator can be described as a "meta" operator for OpenShift Data Foundation, that is, an operator meant to influence other operators and serves as a configuration gateway for the features provided by the other operators. It does not directly manage the other operators.
The ocs-operator has the following primary functions:
- Creates Custom Resources (CRs) that trigger the other operators to reconcile against them.
- Abstracts the Ceph and Multicloud Object Gateway configurations and limits them to known best practices that are validated and supported by Red Hat.
- Creates and reconciles the resources required to deploy containerized Ceph and NooBaa according to the support policies.
3.2.1. Components
The ocs-operator does not have any dependent components. However, the operator has a dependency on the existence of all the custom resource definitions (CRDs) from other operators, which are defined in the ClusterServiceVersion (CSV).
3.2.2. Design diagram
This diagram illustrates how OpenShift Container Storage is integrated with the OpenShift Container Platform.
Figure 3.2. OpenShift Container Storage Operator
3.2.3. Responsibilities
The two ocs-operator CRDs are:
-
OCSInitialization -
StorageCluster
OCSInitialization is a singleton CRD used for encapsulating operations that apply at the operator level. The operator takes care of ensuring that one instance always exists. The CR triggers the following:
Performs initialization tasks required for OpenShift Container Storage. If needed, these tasks can be triggered to run again by deleting the
OCSInitializationCRD.- Ensures that the required Security Context Constraints (SCCs) for OpenShift Container Storage are present.
- Manages the deployment of the Ceph toolbox Pod, used for performing advanced troubleshooting and recovery operations.
The StorageCluster CRD represents the system that provides the full functionality of OpenShift Container Storage. It triggers the operator to ensure the generation and reconciliation of Rook-Ceph and NooBaa CRDs. The ocs-operator algorithmically generates the CephCluster and NooBaa CRDs based on the configuration in the StorageCluster spec. The operator also creates additional CRs, such as CephBlockPools, Routes, and so on. These resources are required for enabling different features of OpenShift Container Storage. Currently, only one StorageCluster CR per OpenShift Container Platform cluster is supported.
3.2.4. Resources
The ocs-operator creates the following CRs in response to the spec of the CRDs it defines . The configuration of some of these resources can be overridden, allowing for changes to the generated spec or not creating them altogether.
- General resources
- Events
- Creates various events when required in response to reconciliation.
- Persistent Volumes (PVs)
- PVs are not created directly by the operator. However, the operator keeps track of all the PVs created by the Ceph CSI drivers and ensures that the PVs have appropriate annotations for the supported features.
- Quickstarts
- Deploys various Quickstart CRs for the OpenShift Container Platform Console.
- Rook-Ceph resources
CephBlockPool-
Define the default Ceph block pools.
CephFilesysPrometheusRulesoutefor the Ceph object store. StorageClass-
Define the default Storage classes. For example, for
CephBlockPoolandCephFilesystem). VolumeSnapshotClass- Define the default volume snapshot classes for the corresponding storage classes.
- Multicloud Object Gateway resources
NooBaa- Define the default Multicloud Object Gateway system.
- Monitoring resources
- Metrics Exporter Service
- Metrics Exporter Service Monitor
- PrometheusRules
3.2.5. Limitation
The ocs-operator neither deploys nor reconciles the other Pods of OpenShift Data Foundation. The ocs-operator CSV defines the top-level components such as operator Deployments and the Operator Lifecycle Manager (OLM) reconciles the specified component.
3.2.6. High availability
High availability is not a primary requirement for the ocs-operator Pod similar to most of the other operators. In general, there are no operations that require or benefit from process distribution. OpenShift Container Platform quickly spins up a replacement Pod whenever the current Pod becomes unavailable or is deleted.
3.2.7. Relevant config files
The ocs-operator configuration is entirely specified by the CSV and is not modifiable without a custom build of the CSV.
3.2.8. Relevant log files
To get an understanding of the OpenShift Container Storage and troubleshoot issues, you can look at the following:
- Operator Pod logs
- StorageCluster status and events
- OCSInitialization status
Operator Pod logs
Each operator provides standard Pod logs that include information about reconciliation and errors encountered. These logs often have information about successful reconciliation which can be filtered out and ignored.
StorageCluster status and events
The StorageCluster CR stores the reconciliation details in the status of the CR and has associated events. Status contains a section of the expected container images. It shows the container images that it expects to be present in the pods from other operators and the images that it currently detects. This helps to determine whether the OpenShift Container Storage upgrade is complete.
OCSInitialization status
This status shows whether the initialization tasks are completed successfully.
3.2.9. Lifecycle
The ocs-operator is required to be present as long as the OpenShift Container Storage bundle remains installed. This is managed as part of OLM’s reconciliation of the OpenShift Container Storage CSV. At least one instance of the pod should be in Ready state.
The operator operands such as CRDs should not affect the lifecycle of the operator. An OCSInitialization CR should always exist. The operator creates one if it does not exist. The creation and deletion of StorageClusters is an operation outside the operator’s control and must be initiated by the administrator or automated with the appropriate API calls.
3.3. Rook-Ceph operator
Rook-Ceph operator is the Rook operator for Ceph in the OpenShift Data Foundation. Rook enables Ceph storage systems to run on the OpenShift Container Platform.
The Rook-Ceph operator is a simple container that automatically bootstraps the storage clusters and monitors the storage daemons to ensure the storage clusters are healthy.
3.3.1. Components
The Rook-Ceph operator manages a number of components as part of the OpenShift Data Foundation deployment.
- Ceph-CSI Driver
-
The operator creates and updates the CSI driver, including a provisioner for each of the two drivers, RADOS block device (RBD) and Ceph filesystem (CephFS) and a volume plugin
daemonsetfor each of the two drivers. - Ceph daemons
- Mons
- The monitors (mons) provide the core metadata store for Ceph.
- OSDs
- The object storage daemons (OSDs) store the data on underlying devices.
- Mgr
- The manager (mgr) collects metrics and provides other internal functions for Ceph.
- RGW
- The RADOS Gateway (RGW) provides the S3 endpoint to the object store.
- MDS
- The metadata server (MDS) provides CephFS shared volumes.
3.3.2. Design diagram
The following image illustrates how Ceph Rook integrates with OpenShift Container Platform.
Figure 3.3. Rook-Ceph Operator
With Ceph running in the OpenShift Container Platform cluster, OpenShift Container Platform applications can mount block devices and filesystems managed by Rook-Ceph, or can use the S3/Swift API for object storage.
3.3.3. Responsibilities
The Rook-Ceph operator is a container that bootstraps and monitors the storage cluster. It performs the following functions:
- Automates the configuration of storage components
- Starts, monitors, and manages the Ceph monitor pods and Ceph OSD daemons to provide the RADOS storage cluster
Initializes the pods and other artifacts to run the services to manage:
- CRDs for pools
- Object stores (S3/Swift)
- Filesystems
- Monitors the Ceph mons and OSDs to ensure that the storage remains available and healthy
- Deploys and manages Ceph mons placement while adjusting the mon configuration based on cluster size
- Watches the desired state changes requested by the API service and applies the changes
- Initializes the Ceph-CSI drivers that are needed for consuming the storage
- Automatically configures the Ceph-CSI driver to mount the storage to pods
Rook-Ceph Operator architecture
The Rook-Ceph operator image includes all required tools to manage the cluster. There is no change to the data path. However, the operator does not expose all Ceph configurations. Many of the Ceph features like placement groups and crush maps are hidden from the users and are provided with a better user experience in terms of physical resources, pools, volumes, filesystems, and buckets.
3.3.4. Resources
Rook-Ceph operator adds owner references to all the resources it creates in the openshift-storage namespace. When the cluster is uninstalled, the owner references ensure that the resources are all cleaned up. This includes OpenShift Container Platform resources such as configmaps, secrets, services, deployments, daemonsets, and so on.
The Rook-Ceph operator watches CRs to configure the settings determined by OpenShift Data Foundation, which includes CephCluster, CephObjectStore, CephFilesystem, and CephBlockPool.
3.3.5. Lifecycle
Rook-Ceph operator manages the lifecycle of the following pods in the Ceph cluster:
- Rook operator
- A single pod that owns the reconcile of the cluster.
- RBD CSI Driver
- Two provisioner pods, managed by a single deployment.
-
One plugin pod per node, managed by a
daemonset.
- CephFS CSI Driver
- Two provisioner pods, managed by a single deployment.
-
One plugin pod per node, managed by a
daemonset.
- Monitors (mons)
Three mon pods, each with its own deployment.
- Stretch clusters
- Contain five mon pods, one in the arbiter zone and two in each of the other two data zones.
- Manager (mgr)
There is a single mgr pod for the cluster.
- Stretch clusters
- There are two mgr pods (starting with OpenShift Data Foundation 4.8), one in each of the two non-arbiter zones.
- Object storage daemons (OSDs)
- At least three OSDs are created initially in the cluster. More OSDs are added when the cluster is expanded.
- Metadata server (MDS)
- The CephFS metadata server has a single pod.
- RADOS gateway (RGW)
- The Ceph RGW daemon has a single pod.
3.4. MCG operator
The Multicloud Object Gateway (MCG) operator is an operator for OpenShift Data Foundation along with the OpenShift Data Foundation operator and the Rook-Ceph operator. The MCG operator is available upstream as a standalone operator.
The MCG operator performs the following primary functions:
- Controls and reconciles the Multicloud Object Gateway (MCG) component within OpenShift Data Foundation.
- Manages new user resources such as object bucket claims, bucket classes, and backing stores.
- Creates the default out-of-the-box resources.
A few configurations and information are passed to the MCG operator through the OpenShift Data Foundation operator.
3.4.1. Components
The MCG operator does not have sub-components. However, it consists of a reconcile loop for the different resources that are controlled by it.
The MCG operator has a command-line interface (CLI) and is available as a part of OpenShift Data Foundation. It enables the creation, deletion, and querying of various resources. This CLI adds a layer of input sanitation and status validation before the configurations are applied unlike applying a YAML file directly.
3.4.2. Responsibilities and resources
The MCG operator reconciles and is responsible for the custom resource definitions (CRDs) and OpenShift Container Platform entities.
- Backing store
- Namespace store
- Bucket class
- Object bucket claims (OBCs)
- NooBaa, pod stateful sets CRD
- Prometheus Rules and Service Monitoring
- Horizontal pod autoscaler (HPA)
Backing store
A resource that the customer has connected to the MCG component. This resource provides MCG the ability to save the data of the provisioned buckets on top of it.
A default backing store is created as part of the deployment depending on the platform that the OpenShift Container Platform is running on. For example, when OpenShift Container Platform or OpenShift Data Foundation is deployed on Amazon Web Services (AWS), it results in a default backing store which is an AWS::S3 bucket. Similarly, for Microsoft Azure, the default backing store is a blob container and so on.
The default backing stores are created using CRDs for the cloud credential operator, which comes with OpenShift Container Platform. There is no limit on the amount of the backing stores that can be added to MCG. The backing stores are used in the bucket class CRD to define the different policies of the bucket. Refer the documentation of the specific OpenShift Data Foundation version to identify the types of services or resources supported as backing stores.
Namespace store
Resources that are used in namespace buckets. No default is created during deployment.
Bucketclass
A default or initial policy for a newly provisioned bucket. The following policies are set in a bucketclass:
- Placement policy
Indicates the backing stores to be attached to the bucket and used to write the data of the bucket. This policy is used for data buckets and for cache policies to indicate the local cache placement. There are two modes of placement policy:
- Spread. Strips the data across the defined backing stores
- Mirror. Creates a full replica on each backing store
- Namespace policy
- A policy for the namespace buckets that defines the resources that are being used for aggregation and the resource used for the write target.
- Cache Policy
- This is a policy for the bucket and sets the hub (the source of truth) and the time to live (TTL) for the cache items.
A default bucket class is created during deployment and it is set with a placement policy that uses the default backing store. There is no limit to the number of bucket class that can be added.
Refer to the documentation of the specific OpenShift Data Foundation version to identify the types of policies that are supported.
Object bucket claims (OBCs)
CRDs that enable provisioning of S3 buckets. With MCG, OBCs receive an optional bucket class to note the initial configuration of the bucket. If a bucket class is not provided, the default bucket class is used.
NooBaa, pod stateful sets CRD
An internal CRD that controls the different pods of the NooBaa deployment such as the DB pod, the core pod, and the endpoints. This CRD must not be changed as it is internal. This operator reconciles the following entities:
- DB pod SCC
- Role Binding and Service Account to allow SSO single sign-on between OpenShift Container Platform and NooBaa user interfaces
- Route for S3 access
- Certificates that are taken and signed by the OpenShift Container Platform and are set on the S3 route
Prometheus rules and service monitoring
These CRDs set up scraping points for Prometheus and alert rules that are supported by MCG.
Horizontal pod autoscaler (HPA)
It is Integrated with the MCG endpoints. The endpoint pods scale up and down according to CPU pressure (amount of S3 traffic).
3.4.3. High availability
As an operator, the only high availability provided is that the OpenShift Container Platform reschedules a failed pod.
3.4.4. Relevant log files
To troubleshoot issues with the NooBaa operator, you can look at the following:
- Operator pod logs, which are also available through the must-gather.
- Different CRDs or entities and their statuses that are available through the must-gather.
3.4.5. Lifecycle
The MCG operator runs and reconciles after OpenShift Data Foundation is deployed and until it is uninstalled.
