Chapter 77. vpn
This chapter describes the commands under the vpn
command.
77.1. vpn endpoint group create Copy linkLink copied to clipboard!
Usage:
Create an endpoint group
Value | Summary |
---|---|
<name> | Name for the endpoint group |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description for the endpoint group |
--type TYPE | Type of endpoints in group (e.g. subnet, cidr) |
--value ENDPOINTS | Endpoint(s) for the group. must all be of the same type. (--value) option can be repeated |
--project <project> | Owner’s project (name or id) |
--project-domain <project-domain> | Domain the project belongs to (name or ID). This can be used in case collisions between project names exist. |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.2. vpn endpoint group delete Copy linkLink copied to clipboard!
Usage:
openstack vpn endpoint group delete [-h] <endpoint-group> [<endpoint-group> ...]
openstack vpn endpoint group delete [-h]
<endpoint-group>
[<endpoint-group> ...]
Delete endpoint group(s)
Value | Summary |
---|---|
<endpoint-group> | Endpoint group(s) to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
This command is provided by the python-neutronclient plugin.
77.3. vpn endpoint group list Copy linkLink copied to clipboard!
Usage:
List endpoint groups that belong to a given project
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--long | List additional fields in output |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | when to include quotes, defaults to nonnumeric |
This command is provided by the python-neutronclient plugin.
77.4. vpn endpoint group set Copy linkLink copied to clipboard!
Usage:
openstack vpn endpoint group set [-h] [--description <description>] [--name <name>] <endpoint-group>
openstack vpn endpoint group set [-h] [--description <description>]
[--name <name>]
<endpoint-group>
Set endpoint group properties
Value | Summary |
---|---|
<endpoint-group> | Endpoint group to set (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description for the endpoint group |
--name <name> | Set a name for the endpoint group |
This command is provided by the python-neutronclient plugin.
77.5. vpn endpoint group show Copy linkLink copied to clipboard!
Usage:
Display endpoint group details
Value | Summary |
---|---|
<endpoint-group> | Endpoint group to display (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.6. vpn ike policy create Copy linkLink copied to clipboard!
Usage:
Create an IKE policy
Value | Summary |
---|---|
<name> | Name of the ike policy |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description of the IKE policy |
--auth-algorithm {sha1,sha256,sha384,sha512} | Authentication algorithm |
--encryption-algorithm {aes-128,3des,aes-192,aes-256} | Encryption algorithm |
--phase1-negotiation-mode {main} | IKE Phase1 negotiation mode |
--ike-version {v1,v2} | IKE version for the policy |
--pfs {group5,group2,group14} | Perfect Forward Secrecy |
--lifetime units=UNITS,value=VALUE | IKE lifetime attributes. 'units'-seconds, default:seconds. 'value'-non negative integer, default:3600. |
--project <project> | Owner’s project (name or id) |
--project-domain <project-domain> | Domain the project belongs to (name or ID). This can be used in case collisions between project names exist. |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.7. vpn ike policy delete Copy linkLink copied to clipboard!
Usage:
openstack vpn ike policy delete [-h] <ike-policy> [<ike-policy> ...]
openstack vpn ike policy delete [-h] <ike-policy> [<ike-policy> ...]
Delete IKE policy (policies)
Value | Summary |
---|---|
<ike-policy> | Ike policy to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
This command is provided by the python-neutronclient plugin.
77.8. vpn ike policy list Copy linkLink copied to clipboard!
Usage:
List IKE policies that belong to a given project
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--long | List additional fields in output |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | when to include quotes, defaults to nonnumeric |
This command is provided by the python-neutronclient plugin.
77.9. vpn ike policy set Copy linkLink copied to clipboard!
Usage:
Set IKE policy properties
Value | Summary |
---|---|
<ike-policy> | Ike policy to set (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description of the IKE policy |
--auth-algorithm {sha1,sha256,sha384,sha512} | Authentication algorithm |
--encryption-algorithm {aes-128,3des,aes-192,aes-256} | Encryption algorithm |
--phase1-negotiation-mode {main} | IKE Phase1 negotiation mode |
--ike-version {v1,v2} | IKE version for the policy |
--pfs {group5,group2,group14} | Perfect Forward Secrecy |
--lifetime units=UNITS,value=VALUE | IKE lifetime attributes. 'units'-seconds, default:seconds. 'value'-non negative integer, default:3600. |
--name <name> | Name of the ike policy |
This command is provided by the python-neutronclient plugin.
77.10. vpn ike policy show Copy linkLink copied to clipboard!
Usage:
Display IKE policy details
Value | Summary |
---|---|
<ike-policy> | Ike policy to display (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.11. vpn ipsec policy create Copy linkLink copied to clipboard!
Usage:
Create an IPsec policy
Value | Summary |
---|---|
<name> | Name of the ipsec policy |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description of the IPsec policy |
--auth-algorithm {sha1,sha256,sha384,sha512} | Authentication algorithm for IPsec policy |
--encapsulation-mode {tunnel,transport} | Encapsulation mode for IPsec policy |
--encryption-algorithm {3des,aes-128,aes-192,aes-256} | Encryption algorithm for IPsec policy |
--lifetime units=UNITS,value=VALUE | IPsec lifetime attributes. 'units'-seconds, default:seconds. 'value'-non negative integer, default:3600. |
--pfs {group2,group5,group14} | Perfect Forward Secrecy for IPsec policy |
--transform-protocol {esp,ah,ah-esp} | Transform protocol for IPsec policy |
--project <project> | Owner’s project (name or id) |
--project-domain <project-domain> | Domain the project belongs to (name or ID). This can be used in case collisions between project names exist. |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.12. vpn ipsec policy delete Copy linkLink copied to clipboard!
Usage:
openstack vpn ipsec policy delete [-h] <ipsec-policy> [<ipsec-policy> ...]
openstack vpn ipsec policy delete [-h]
<ipsec-policy> [<ipsec-policy> ...]
Delete IPsec policy(policies)
Value | Summary |
---|---|
<ipsec-policy> | Ipsec policy to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
This command is provided by the python-neutronclient plugin.
77.13. vpn ipsec policy list Copy linkLink copied to clipboard!
Usage:
List IPsec policies that belong to a given project
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--long | List additional fields in output |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | when to include quotes, defaults to nonnumeric |
This command is provided by the python-neutronclient plugin.
77.14. vpn ipsec policy set Copy linkLink copied to clipboard!
Usage:
Set IPsec policy properties
Value | Summary |
---|---|
<ipsec-policy> | Ipsec policy to set (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description of the IPsec policy |
--auth-algorithm {sha1,sha256,sha384,sha512} | Authentication algorithm for IPsec policy |
--encapsulation-mode {tunnel,transport} | Encapsulation mode for IPsec policy |
--encryption-algorithm {3des,aes-128,aes-192,aes-256} | Encryption algorithm for IPsec policy |
--lifetime units=UNITS,value=VALUE | IPsec lifetime attributes. 'units'-seconds, default:seconds. 'value'-non negative integer, default:3600. |
--pfs {group2,group5,group14} | Perfect Forward Secrecy for IPsec policy |
--transform-protocol {esp,ah,ah-esp} | Transform protocol for IPsec policy |
--name <name> | Name of the ipsec policy |
This command is provided by the python-neutronclient plugin.
77.15. vpn ipsec policy show Copy linkLink copied to clipboard!
Usage:
Display IPsec policy details
Value | Summary |
---|---|
<ipsec-policy> | Ipsec policy to display (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.16. vpn ipsec site connection create Copy linkLink copied to clipboard!
Usage:
Create an IPsec site connection
Value | Summary |
---|---|
<name> | Set friendly name for the connection |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description for the connection |
--dpd action=ACTION,interval=INTERVAL,timeout=TIMEOUT | Ipsec connection Dead Peer Detection attributes. 'action'-hold,clear,disabled,restart,restart-by-peer. 'interval' and 'timeout' are non negative integers. 'interval' should be less than 'timeout' value. 'action', default:hold 'interval', default:30, 'timeout', default:120. |
--mtu MTU | Mtu size for the connection |
--initiator {bi-directional,response-only} | Initiator state |
--peer-cidr PEER_CIDRS | Remote subnet(s) in CIDR format. Cannot be specified when using endpoint groups. Only applicable, if subnet provided for VPN service. |
--local-endpoint-group LOCAL_ENDPOINT_GROUP | Local endpoint group (name or ID) with subnet(s) for IPsec connection |
--peer-endpoint-group PEER_ENDPOINT_GROUP | Peer endpoint group (name or ID) with CIDR(s) for IPSec connection |
--enable | Enable ipsec site connection |
--disable | Disable ipsec site connection |
--local-id LOCAL_ID | An id to be used instead of the external ip address for a virtual router |
--peer-id PEER_ID | Peer router identity for authentication. can be IPv4/IPv6 address, e-mail address, key id, or FQDN |
--peer-address PEER_ADDRESS | Peer gateway public IPv4/IPv6 address or FQDN |
--psk PSK | Pre-shared key string. |
--vpnservice VPNSERVICE | VPN service instance associated with this connection (name or ID) |
--ikepolicy IKEPOLICY | IKE policy associated with this connection (name or ID) |
--ipsecpolicy IPSECPOLICY | IPsec policy associated with this connection (name or ID) |
--project <project> | Owner’s project (name or id) |
--project-domain <project-domain> | Domain the project belongs to (name or ID). This can be used in case collisions between project names exist. |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.17. vpn ipsec site connection delete Copy linkLink copied to clipboard!
Usage:
openstack vpn ipsec site connection delete [-h] <ipsec-site-connection> [<ipsec-site-connection> ...]
openstack vpn ipsec site connection delete [-h]
<ipsec-site-connection>
[<ipsec-site-connection> ...]
Delete IPsec site connection(s)
Value | Summary |
---|---|
<ipsec-site-connection> | IPsec site connection to delete (name or ID) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
This command is provided by the python-neutronclient plugin.
77.18. vpn ipsec site connection list Copy linkLink copied to clipboard!
Usage:
List IPsec site connections that belong to a given project
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--long | List additional fields in output |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | when to include quotes, defaults to nonnumeric |
This command is provided by the python-neutronclient plugin.
77.19. vpn ipsec site connection set Copy linkLink copied to clipboard!
Usage:
Set IPsec site connection properties
Value | Summary |
---|---|
<ipsec-site-connection> | IPsec site connection to set (name or ID) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description for the connection |
--dpd action=ACTION,interval=INTERVAL,timeout=TIMEOUT | Ipsec connection Dead Peer Detection attributes. 'action'-hold,clear,disabled,restart,restart-by-peer. 'interval' and 'timeout' are non negative integers. 'interval' should be less than 'timeout' value. 'action', default:hold 'interval', default:30, 'timeout', default:120. |
--mtu MTU | Mtu size for the connection |
--initiator {bi-directional,response-only} | Initiator state |
--peer-cidr PEER_CIDRS | Remote subnet(s) in CIDR format. Cannot be specified when using endpoint groups. Only applicable, if subnet provided for VPN service. |
--local-endpoint-group LOCAL_ENDPOINT_GROUP | Local endpoint group (name or ID) with subnet(s) for IPsec connection |
--peer-endpoint-group PEER_ENDPOINT_GROUP | Peer endpoint group (name or ID) with CIDR(s) for IPSec connection |
--enable | Enable ipsec site connection |
--disable | Disable ipsec site connection |
--local-id LOCAL_ID | An id to be used instead of the external ip address for a virtual router |
--peer-id PEER_ID | Peer router identity for authentication. can be IPv4/IPv6 address, e-mail address, key id, or FQDN |
--peer-address PEER_ADDRESS | Peer gateway public IPv4/IPv6 address or FQDN |
--name <name> | Set friendly name for the connection |
This command is provided by the python-neutronclient plugin.
77.20. vpn ipsec site connection show Copy linkLink copied to clipboard!
Usage:
Show information of a given IPsec site connection
Value | Summary |
---|---|
<ipsec-site-connection> | IPsec site connection to display (name or ID) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.21. vpn service create Copy linkLink copied to clipboard!
Usage:
Create an VPN service
Value | Summary |
---|---|
<name> | Name for the vpn service |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description for the VPN service |
--subnet <subnet> | Local private subnet (name or id) |
--flavor <flavor> | Flavor for the vpn service (name or id) |
--enable | Enable vpn service |
--disable | Disable vpn service |
--router ROUTER | Router for the vpn service (name or id) |
--project <project> | Owner’s project (name or id) |
--project-domain <project-domain> | Domain the project belongs to (name or ID). This can be used in case collisions between project names exist. |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.
77.22. vpn service delete Copy linkLink copied to clipboard!
Usage:
openstack vpn service delete [-h] <vpn-service> [<vpn-service> ...]
openstack vpn service delete [-h] <vpn-service> [<vpn-service> ...]
Delete VPN service(s)
Value | Summary |
---|---|
<vpn-service> | Vpn service to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
This command is provided by the python-neutronclient plugin.
77.23. vpn service list Copy linkLink copied to clipboard!
Usage:
List VPN services that belong to a given project
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--long | List additional fields in output |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | when to include quotes, defaults to nonnumeric |
This command is provided by the python-neutronclient plugin.
77.24. vpn service set Copy linkLink copied to clipboard!
Usage:
openstack vpn service set [-h] [--description <description>] [--subnet <subnet>] [--flavor <flavor>] [--enable | --disable] [--name <name>] <vpn-service>
openstack vpn service set [-h] [--description <description>]
[--subnet <subnet>] [--flavor <flavor>]
[--enable | --disable] [--name <name>]
<vpn-service>
Set VPN service properties
Value | Summary |
---|---|
<vpn-service> | Vpn service to modify (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description for the VPN service |
--subnet <subnet> | Local private subnet (name or id) |
--flavor <flavor> | Flavor for the vpn service (name or id) |
--enable | Enable vpn service |
--disable | Disable vpn service |
--name <name> | Name for the vpn service |
This command is provided by the python-neutronclient plugin.
77.25. vpn service show Copy linkLink copied to clipboard!
Usage:
Display VPN service details
Value | Summary |
---|---|
<vpn-service> | Vpn service to display (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | the output format, defaults to table |
-c COLUMN, --column COLUMN | specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
This command is provided by the python-neutronclient plugin.