Chapter 11. baremetal
This chapter describes the commands under the baremetal
command.
11.1. baremetal allocation create
Create a new baremetal allocation.
Usage:
openstack baremetal allocation create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] --resource-class RESOURCE_CLASS [--trait TRAITS] [--candidate-node CANDIDATE_NODES] [--name NAME] [--uuid UUID] [--extra <key=value>] [--wait [<time-out>]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--resource-class RESOURCE_CLASS | Resource class to request. |
--trait TRAITS | A trait to request. can be specified multiple times. |
--candidate-node CANDIDATE_NODES | A candidate node for this allocation. can be specified multiple times. If at least one is specified, only the provided candidate nodes are considered for the allocation. |
--name NAME | Unique name of the allocation. |
--uuid UUID | Uuid of the allocation. |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
--wait [<time-out>] | Wait for the new allocation to become active. an error is returned if allocation fails and --wait is used. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.2. baremetal allocation delete
Unregister baremetal allocation(s).
Usage:
openstack baremetal allocation delete [-h] <allocation> [<allocation> ...]
Value | Summary |
---|---|
<allocation> | Allocations(s) to delete (name or uuid). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.3. baremetal allocation list
List baremetal allocations.
Usage:
openstack baremetal allocation list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--limit <limit>] [--marker <allocation>] [--sort <key>[:<direction>]] [--node <node>] [--resource-class <resource_class>] [--state <state>] [--long | --fields <field> [<field> ...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--limit <limit> | Maximum number of allocations to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--marker <allocation> | Allocation uuid (for example, of the last allocation in the list from a previous request). Returns the list of allocations after this UUID. |
--sort <key>[:<direction>] | Sort output by specified allocation fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma. |
--node <node> | Only list allocations of this node (name or uuid). |
--resource-class <resource_class> | Only list allocations with this resource class. |
--state <state> | Only list allocations in this state. |
--long | Show detailed information about the allocations. |
--fields <field> [<field> …] | One or more allocation fields. only these fields will be fetched from the server. Can not be used when -- long is specified. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.4. baremetal allocation show
Show baremetal allocation details.
Usage:
openstack baremetal allocation show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--fields <field> [<field> ...]] <id>
Value | Summary |
---|---|
<id> | Uuid or name of the allocation |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--fields <field> [<field> …] | One or more allocation fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.5. baremetal chassis create
Create a new chassis.
Usage:
openstack baremetal chassis create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--description <description>] [--extra <key=value>] [--uuid <uuid>]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Description for the chassis |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
--uuid <uuid> | Unique uuid of the chassis |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.6. baremetal chassis delete
Delete a chassis.
Usage:
openstack baremetal chassis delete [-h] <chassis> [<chassis> ...]
Value | Summary |
---|---|
<chassis> | Uuids of chassis to delete |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.7. baremetal chassis list
List the chassis.
Usage:
openstack baremetal chassis list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--fields <field> [<field> ...]] [--limit <limit>] [--long] [--marker <chassis>] [--sort <key>[:<direction>]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--fields <field> [<field> …] | One or more chassis fields. only these fields will be fetched from the server. Cannot be used when --long is specified. |
--limit <limit> | Maximum number of chassis to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--long | Show detailed information about the chassis |
--marker <chassis> | Chassis uuid (for example, of the last chassis in the list from a previous request). Returns the list of chassis after this UUID. |
--sort <key>[:<direction>] | Sort output by specified chassis fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.8. baremetal chassis set
Set chassis properties.
Usage:
openstack baremetal chassis set [-h] [--description <description>] [--extra <key=value>] <chassis>
Value | Summary |
---|---|
<chassis> | Uuid of the chassis |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description <description> | Set the description of the chassis |
--extra <key=value> | Extra to set on this chassis (repeat option to set multiple extras) |
11.9. baremetal chassis show
Show chassis details.
Usage:
openstack baremetal chassis show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--fields <field> [<field> ...]] <chassis>
Value | Summary |
---|---|
<chassis> | Uuid of the chassis |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--fields <field> [<field> …] | One or more chassis fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.10. baremetal chassis unset
Unset chassis properties.
Usage:
openstack baremetal chassis unset [-h] [--description] [--extra <key>] <chassis>
Value | Summary |
---|---|
<chassis> | Uuid of the chassis |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description | Clear the chassis description |
--extra <key> | Extra to unset on this chassis (repeat option to unset multiple extras) |
11.11. baremetal conductor list
List baremetal conductors
Usage:
openstack baremetal conductor list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--limit <limit>] [--marker <conductor>] [--sort <key>[:<direction>]] [--long | --fields <field> [<field> ...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--limit <limit> | Maximum number of conductors to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--marker <conductor> | Hostname of the conductor (for example, of the last conductor in the list from a previous request). Returns the list of conductors after this conductor. |
--sort <key>[:<direction>] | Sort output by specified conductor fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma. |
--long | Show detailed information about the conductors. |
--fields <field> [<field> …] | One or more conductor fields. only these fields will be fetched from the server. Can not be used when -- long is specified. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.12. baremetal conductor show
Show baremetal conductor details
Usage:
openstack baremetal conductor show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--fields <field> [<field> ...]] <conductor>
Value | Summary |
---|---|
<conductor> | Hostname of the conductor |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--fields <field> [<field> …] | One or more conductor fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.13. baremetal create
Create resources from files
Usage:
openstack baremetal create [-h] <file> [<file> ...]
Value | Summary |
---|---|
<file> | File (.yaml or .json) containing descriptions of the resources to create. Can be specified multiple times. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.14. baremetal deploy template create
Create a new deploy template
Usage:
openstack baremetal deploy template create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--uuid <uuid>] [--extra <key=value>] --steps <steps> <name>
Value | Summary |
---|---|
<name> | Unique name for this deploy template. must be a valid trait name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--uuid <uuid> | Uuid of the deploy template. |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
--steps <steps> | The deploy steps in json format. may be the path to a file containing the deploy steps; OR -, with the deploy steps being read from standard input; OR a string. The value should be a list of deploy-step dictionaries; each dictionary should have keys interface, step, args and priority. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.15. baremetal deploy template delete
Delete deploy template(s).
Usage:
openstack baremetal deploy template delete [-h] <template> [<template> ...]
Value | Summary |
---|---|
<template> | Name(s) or uuid(s) of the deploy template(s) to delete. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.16. baremetal deploy template list
List baremetal deploy templates.
Usage:
openstack baremetal deploy template list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--limit <limit>] [--marker <template>] [--sort <key>[:<direction>]] [--long | --fields <field> [<field> ...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--limit <limit> | Maximum number of deploy templates to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--marker <template> | Deploytemplate uuid (for example, of the last deploy template in the list from a previous request). Returns the list of deploy templates after this UUID. |
--sort <key>[:<direction>] | Sort output by specified deploy template fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma. |
--long | Show detailed information about deploy templates. |
--fields <field> [<field> …] | One or more deploy template fields. only these fields will be fetched from the server. Can not be used when --long is specified. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.17. baremetal deploy template set
Set baremetal deploy template properties.
Usage:
openstack baremetal deploy template set [-h] [--name <name>] [--steps <steps>] [--extra <key=value>] <template>
Value | Summary |
---|---|
<template> | Name or uuid of the deploy template |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set unique name of the deploy template. must be a valid trait name. |
--steps <steps> | The deploy steps in json format. may be the path to a file containing the deploy steps; OR -, with the deploy steps being read from standard input; OR a string. The value should be a list of deploy-step dictionaries; each dictionary should have keys interface, step, args and priority. |
--extra <key=value> | Extra to set on this baremetal deploy template (repeat option to set multiple extras). |
11.18. baremetal deploy template show
Show baremetal deploy template details.
Usage:
openstack baremetal deploy template show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--fields <field> [<field> ...]] <template>
Value | Summary |
---|---|
<template> | Name or uuid of the deploy template. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--fields <field> [<field> …] | One or more deploy template fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.19. baremetal deploy template unset
Unset baremetal deploy template properties.
Usage:
openstack baremetal deploy template unset [-h] [--extra <key>] <template>
Value | Summary |
---|---|
<template> | Name or uuid of the deploy template |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--extra <key> | Extra to unset on this baremetal deploy template (repeat option to unset multiple extras). |
11.20. baremetal driver list
List the enabled drivers.
Usage:
openstack baremetal driver list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--type <type>] [--long]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--type <type> | Type of driver ("classic" or "dynamic"). the default is to list all of them. |
--long | Show detailed information about the drivers. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.21. baremetal driver passthru call
Call a vendor passthru method for a driver.
Usage:
openstack baremetal driver passthru call [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--arg <key=value>] [--http-method <http-method>] <driver> <method>
Value | Summary |
---|---|
<driver> | Name of the driver. |
<method> | Vendor passthru method to be called. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--arg <key=value> | Argument to pass to the passthru method (repeat option to specify multiple arguments). |
--http-method <http-method> | The http method to use in the passthru request. one of DELETE, GET, PATCH, POST, PUT. Defaults to POST. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.22. baremetal driver passthru list
List available vendor passthru methods for a driver.
Usage:
openstack baremetal driver passthru list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <driver>
Value | Summary |
---|---|
<driver> | Name of the driver. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.23. baremetal driver property list
List the driver properties.
Usage:
openstack baremetal driver property list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <driver>
Value | Summary |
---|---|
<driver> | Name of the driver. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.24. baremetal driver raid property list
List a driver’s RAID logical disk properties.
Usage:
openstack baremetal driver raid property list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <driver>
Value | Summary |
---|---|
<driver> | Name of the driver. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.25. baremetal driver show
Show information about a driver.
Usage:
openstack baremetal driver show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] <driver>
Value | Summary |
---|---|
<driver> | Name of the driver. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.26. baremetal introspection abort
Abort running introspection for node.
Usage:
openstack baremetal introspection abort [-h] node
Value | Summary |
---|---|
node | Baremetal node uuid or name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.27. baremetal introspection data save
Save or display raw introspection data.
Usage:
openstack baremetal introspection data save [-h] [--file <filename>] node
Value | Summary |
---|---|
node | Baremetal node uuid or name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--file <filename> | Downloaded introspection data filename (default: stdout) |
11.28. baremetal introspection interface list
List interface data including attached switch port information.
Usage:
openstack baremetal introspection interface list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--vlan VLAN] [--long | --fields <field> [<field> ...]] node_ident
Value | Summary |
---|---|
node_ident | Baremetal node uuid or name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--vlan VLAN | List only interfaces configured for this vlan id, can be repeated |
--long | Show detailed information about interfaces. |
--fields <field> [<field> …] | Display one or more fields. can not be used when -- long is specified |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.29. baremetal introspection interface show
Show interface data including attached switch port information.
Usage:
openstack baremetal introspection interface show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--fields <field> [<field> ...]] node_ident interface
Value | Summary |
---|---|
node_ident | Baremetal node uuid or name |
interface | Interface name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--fields <field> [<field> …] | Display one or more fields. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.30. baremetal introspection list
List introspection statuses
Usage:
openstack baremetal introspection list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--marker MARKER] [--limit LIMIT]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--marker MARKER | Uuid of the last item on the previous page |
--limit LIMIT | The amount of items to return |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.31. baremetal introspection reprocess
Reprocess stored introspection data
Usage:
openstack baremetal introspection reprocess [-h] node
Value | Summary |
---|---|
node | Baremetal node uuid or name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.32. baremetal introspection rule delete
Delete an introspection rule.
Usage:
openstack baremetal introspection rule delete [-h] uuid
Value | Summary |
---|---|
uuid | Rule uuid |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.33. baremetal introspection rule import
Import one or several introspection rules from a JSON/YAML file.
Usage:
openstack baremetal introspection rule import [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] file
Value | Summary |
---|---|
file | Json or yaml file to import, may contain one or several rules |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.34. baremetal introspection rule list
List all introspection rules.
Usage:
openstack baremetal introspection rule list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.35. baremetal introspection rule purge
Drop all introspection rules.
Usage:
openstack baremetal introspection rule purge [-h]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.36. baremetal introspection rule show
Show an introspection rule.
Usage:
openstack baremetal introspection rule show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] uuid
Value | Summary |
---|---|
uuid | Rule uuid |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.37. baremetal introspection start
Start the introspection.
Usage:
openstack baremetal introspection start [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--wait] [--check-errors] node [node ...]
Value | Summary |
---|---|
node | Baremetal node uuid(s) or name(s) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait | Wait for introspection to finish; the result will be displayed in the end |
--check-errors | Check if errors occurred during the introspection; if any error occurs only the errors are displayed; can only be used with --wait |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.38. baremetal introspection status
Get introspection status.
Usage:
openstack baremetal introspection status [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] node
Value | Summary |
---|---|
node | Baremetal node uuid or name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.39. baremetal node abort
Set provision state of baremetal node to abort
Usage:
openstack baremetal node abort [-h] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.40. baremetal node add trait
Add traits to a node.
Usage:
openstack baremetal node add trait [-h] <node> <trait> [<trait> ...]
Value | Summary |
---|---|
<node> | Name or uuid of the node |
<trait> | Trait(s) to add |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.41. baremetal node adopt
Set provision state of baremetal node to adopt
Usage:
openstack baremetal node adopt [-h] [--wait [<time-out>]] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
11.42. baremetal node bios setting list
List a node’s BIOS settings.
Usage:
openstack baremetal node bios setting list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.43. baremetal node bios setting show
Show a specific BIOS setting for a node.
Usage:
openstack baremetal node bios setting show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] <node> <setting name>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
<setting name> | Setting name to show |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.44. baremetal node boot device set
Set the boot device for a node
Usage:
openstack baremetal node boot device set [-h] [--persistent] <node> <device>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
<device> | One of bios, cdrom, disk, pxe, safe, wanboot |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--persistent | Make changes persistent for all future boots |
11.45. baremetal node boot device show
Show the boot device information for a node
Usage:
openstack baremetal node boot device show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--supported] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--supported | Show the supported boot devices |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.46. baremetal node clean
Set provision state of baremetal node to clean
Usage:
openstack baremetal node clean [-h] [--wait [<time-out>]] --clean-steps <clean-steps> <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, manageable. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
--clean-steps <clean-steps> | The clean steps in json format. may be the path to a file containing the clean steps; OR -, with the clean steps being read from standard input; OR a string. The value should be a list of clean-step dictionaries; each dictionary should have keys interface and step, and optional key args. |
11.47. baremetal node console disable
Disable console access for a node
Usage:
openstack baremetal node console disable [-h] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.48. baremetal node console enable
Enable console access for a node
Usage:
openstack baremetal node console enable [-h] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.49. baremetal node console show
Show console information for a node
Usage:
openstack baremetal node console show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.50. baremetal node create
Register a new node with the baremetal service
Usage:
openstack baremetal node create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--chassis-uuid <chassis>] --driver <driver> [--driver-info <key=value>] [--property <key=value>] [--extra <key=value>] [--uuid <uuid>] [--name <name>] [--bios-interface <bios_interface>] [--boot-interface <boot_interface>] [--console-interface <console_interface>] [--deploy-interface <deploy_interface>] [--inspect-interface <inspect_interface>] [--management-interface <management_interface>] [--network-interface <network_interface>] [--power-interface <power_interface>] [--raid-interface <raid_interface>] [--rescue-interface <rescue_interface>] [--storage-interface <storage_interface>] [--vendor-interface <vendor_interface>] [--resource-class <resource_class>] [--conductor-group <conductor_group>] [--automated-clean] [--owner <owner>] [--description <description>]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--chassis-uuid <chassis> | Uuid of the chassis that this node belongs to. |
--driver <driver> | Driver used to control the node [required]. |
--driver-info <key=value> | Key/value pair used by the driver, such as out-of-band management credentials. Can be specified multiple times. |
--property <key=value> | Key/value pair describing the physical characteristics of the node. This is exported to Nova and used by the scheduler. Can be specified multiple times. |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
--uuid <uuid> | Unique uuid for the node. |
--name <name> | Unique name for the node. |
--bios-interface <bios_interface> | Bios interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--boot-interface <boot_interface> | Boot interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--console-interface <console_interface> | Console interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--deploy-interface <deploy_interface> | Deploy interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--inspect-interface <inspect_interface> | Inspect interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--management-interface <management_interface> | Management interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--network-interface <network_interface> | Network interface used for switching node to cleaning/provisioning networks. |
--power-interface <power_interface> | Power interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--raid-interface <raid_interface> | Raid interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--rescue-interface <rescue_interface> | Rescue interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--storage-interface <storage_interface> | Storage interface used by the node’s driver. |
--vendor-interface <vendor_interface> | Vendor interface used by the node’s driver. this is only applicable when the specified --driver is a hardware type. |
--resource-class <resource_class> | Resource class for mapping nodes to nova flavors |
--conductor-group <conductor_group> | Conductor group the node will belong to |
--automated-clean | Enable automated cleaning for the node |
--owner <owner> | Owner of the node. |
--description <description> | Description for the node. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.51. baremetal node delete
Unregister baremetal node(s)
Usage:
openstack baremetal node delete [-h] <node> [<node> ...]
Value | Summary |
---|---|
<node> | Node(s) to delete (name or uuid) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.52. baremetal node deploy
Set provision state of baremetal node to deploy
Usage:
openstack baremetal node deploy [-h] [--wait [<time-out>]] [--config-drive <config-drive>] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
--config-drive <config-drive> |
A gzipped, base64-encoded configuration drive string OR the path to the configuration drive file OR the path to a directory containing the config drive files OR a JSON object to build config drive from. In case it’s a directory, a config drive will be generated from it. In case it’s a JSON object with optional keys |
11.53. baremetal node inject nmi
Inject NMI to baremetal node
Usage:
openstack baremetal node inject nmi [-h] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.54. baremetal node inspect
Set provision state of baremetal node to inspect
Usage:
openstack baremetal node inspect [-h] [--wait [<time-out>]] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, manageable. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
11.55. baremetal node list
List baremetal nodes
Usage:
openstack baremetal node list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--limit <limit>] [--marker <node>] [--sort <key>[:<direction>]] [--maintenance | --no-maintenance] [--fault <fault>] [--associated | --unassociated] [--provision-state <provision state>] [--driver <driver>] [--resource-class <resource class>] [--conductor-group <conductor_group>] [--conductor <conductor>] [--chassis <chassis UUID>] [--owner <owner>] [--description-contains <description_contains>] [--long | --fields <field> [<field> ...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--limit <limit> | Maximum number of nodes to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--marker <node> | Node uuid (for example, of the last node in the list from a previous request). Returns the list of nodes after this UUID. |
--sort <key>[:<direction>] | Sort output by specified node fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma. |
--maintenance | Limit list to nodes in maintenance mode |
--no-maintenance | Limit list to nodes not in maintenance mode |
--fault <fault> | List nodes in specified fault. |
--associated | List only nodes associated with an instance. |
--unassociated | List only nodes not associated with an instance. |
--provision-state <provision state> | List nodes in specified provision state. |
--driver <driver> | Limit list to nodes with driver <driver> |
--resource-class <resource class> | Limit list to nodes with resource class <resource class> |
--conductor-group <conductor_group> | Limit list to nodes with conductor group <conductor group> |
--conductor <conductor> | Limit list to nodes with conductor <conductor> |
--chassis <chassis UUID> | Limit list to nodes of this chassis |
--owner <owner> | Limit list to nodes with owner <owner> |
--description-contains <description_contains> | Limit list to nodes with description contains <description_contains> |
--long | Show detailed information about the nodes. |
--fields <field> [<field> …] | One or more node fields. only these fields will be fetched from the server. Can not be used when --long is specified. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.56. baremetal node maintenance set
Set baremetal node to maintenance mode
Usage:
openstack baremetal node maintenance set [-h] [--reason <reason>] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--reason <reason> | Reason for setting maintenance mode. |
11.57. baremetal node maintenance unset
Unset baremetal node from maintenance mode
Usage:
openstack baremetal node maintenance unset [-h] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.58. baremetal node manage
Set provision state of baremetal node to manage
Usage:
openstack baremetal node manage [-h] [--wait [<time-out>]] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, manageable. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
11.59. baremetal node passthru call
Call a vendor passthu method for a node
Usage:
openstack baremetal node passthru call [-h] [--arg <key=value>] [--http-method <http-method>] <node> <method>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
<method> | Vendor passthru method to be executed |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--arg <key=value> | Argument to pass to the passthru method (repeat option to specify multiple arguments) |
--http-method <http-method> | The http method to use in the passthru request. one of DELETE, GET, PATCH, POST, PUT. Defaults to POST. |
11.60. baremetal node passthru list
List vendor passthru methods for a node
Usage:
openstack baremetal node passthru list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.61. baremetal node power off
Power off a node
Usage:
openstack baremetal node power off [-h] [--power-timeout <power-timeout>] [--soft] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--power-timeout <power-timeout> | Timeout (in seconds, positive integer) to wait for the target power state before erroring out. |
--soft | Request graceful power-off. |
11.62. baremetal node power on
Power on a node
Usage:
openstack baremetal node power on [-h] [--power-timeout <power-timeout>] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--power-timeout <power-timeout> | Timeout (in seconds, positive integer) to wait for the target power state before erroring out. |
11.63. baremetal node provide
Set provision state of baremetal node to provide
Usage:
openstack baremetal node provide [-h] [--wait [<time-out>]] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, available. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
11.64. baremetal node reboot
Reboot baremetal node
Usage:
openstack baremetal node reboot [-h] [--soft] [--power-timeout <power-timeout>] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--soft | Request graceful reboot. |
--power-timeout <power-timeout> | Timeout (in seconds, positive integer) to wait for the target power state before erroring out. |
11.65. baremetal node rebuild
Set provision state of baremetal node to rebuild
Usage:
openstack baremetal node rebuild [-h] [--wait [<time-out>]] [--config-drive <config-drive>] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
--config-drive <config-drive> |
A gzipped, base64-encoded configuration drive string OR the path to the configuration drive file OR the path to a directory containing the config drive files OR a JSON object to build config drive from. In case it’s a directory, a config drive will be generated from it. In case it’s a JSON object with optional keys |
11.66. baremetal node remove trait
Remove trait(s) from a node.
Usage:
openstack baremetal node remove trait [-h] [--all] <node> [<trait> [<trait> ...]]
Value | Summary |
---|---|
<node> | Name or uuid of the node |
<trait> | Trait(s) to remove |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all | Remove all traits |
11.67. baremetal node rescue
Set provision state of baremetal node to rescue
Usage:
openstack baremetal node rescue [-h] [--wait [<time-out>]] --rescue-password <rescue-password> <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, rescue. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
--rescue-password <rescue-password> | The password that will be used to login to the rescue ramdisk. The value should be a non-empty string. |
11.68. baremetal node set
Set baremetal properties
Usage:
openstack baremetal node set [-h] [--instance-uuid <uuid>] [--name <name>] [--chassis-uuid <chassis UUID>] [--driver <driver>] [--bios-interface <bios_interface> | --reset-bios-interface] [--boot-interface <boot_interface> | --reset-boot-interface] [--console-interface <console_interface> | --reset-console-interface] [--deploy-interface <deploy_interface> | --reset-deploy-interface] [--inspect-interface <inspect_interface> | --reset-inspect-interface] [--management-interface <management_interface> | --reset-management-interface] [--network-interface <network_interface> | --reset-network-interface] [--power-interface <power_interface> | --reset-power-interface] [--raid-interface <raid_interface> | --reset-raid-interface] [--rescue-interface <rescue_interface> | --reset-rescue-interface] [--storage-interface <storage_interface> | --reset-storage-interface] [--vendor-interface <vendor_interface> | --reset-vendor-interface] [--reset-interfaces] [--resource-class <resource_class>] [--conductor-group <conductor_group>] [--automated-clean] [--protected] [--protected-reason <protected_reason>] [--target-raid-config <target_raid_config>] [--property <key=value>] [--extra <key=value>] [--driver-info <key=value>] [--instance-info <key=value>] [--owner <owner>] [--description <description>] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--instance-uuid <uuid> | Set instance uuid of node to <uuid> |
--name <name> | Set the name of the node |
--chassis-uuid <chassis UUID> | Set the chassis for the node |
--driver <driver> | Set the driver for the node |
--bios-interface <bios_interface> | Set the bios interface for the node |
--reset-bios-interface | Reset the bios interface to its hardware type default |
--boot-interface <boot_interface> | Set the boot interface for the node |
--reset-boot-interface | Reset the boot interface to its hardware type default |
--console-interface <console_interface> | Set the console interface for the node |
--reset-console-interface | Reset the console interface to its hardware type default |
--deploy-interface <deploy_interface> | Set the deploy interface for the node |
--reset-deploy-interface | Reset the deploy interface to its hardware type default |
--inspect-interface <inspect_interface> | Set the inspect interface for the node |
--reset-inspect-interface | Reset the inspect interface to its hardware type default |
--management-interface <management_interface> | Set the management interface for the node |
--reset-management-interface | Reset the management interface to its hardware type default |
--network-interface <network_interface> | Set the network interface for the node |
--reset-network-interface | Reset the network interface to its hardware type default |
--power-interface <power_interface> | Set the power interface for the node |
--reset-power-interface | Reset the power interface to its hardware type default |
--raid-interface <raid_interface> | Set the raid interface for the node |
--reset-raid-interface | Reset the raid interface to its hardware type default |
--rescue-interface <rescue_interface> | Set the rescue interface for the node |
--reset-rescue-interface | Reset the rescue interface to its hardware type default |
--storage-interface <storage_interface> | Set the storage interface for the node |
--reset-storage-interface | Reset the storage interface to its hardware type default |
--vendor-interface <vendor_interface> | Set the vendor interface for the node |
--reset-vendor-interface | Reset the vendor interface to its hardware type default |
--reset-interfaces | Reset all interfaces not specified explicitly to their default implementations. Only valid with --driver. |
--resource-class <resource_class> | Set the resource class for the node |
--conductor-group <conductor_group> | Set the conductor group for the node |
--automated-clean | Enable automated cleaning for the node |
--protected | Mark the node as protected |
--protected-reason <protected_reason> | Set the reason of marking the node as protected |
--target-raid-config <target_raid_config> | Set the target raid configuration (json) for the node. This can be one of: 1. a file containing JSON data of the RAID configuration; 2. "-" to read the contents from standard input; or 3. a valid JSON string. |
--property <key=value> | Property to set on this baremetal node (repeat option to set multiple properties) |
--extra <key=value> | Extra to set on this baremetal node (repeat option to set multiple extras) |
--driver-info <key=value> | Driver information to set on this baremetal node (repeat option to set multiple driver infos) |
--instance-info <key=value> | Instance information to set on this baremetal node (repeat option to set multiple instance infos) |
--owner <owner> | Set the owner for the node |
--description <description> | Set the description for the node |
11.69. baremetal node show
Show baremetal node details
Usage:
openstack baremetal node show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--instance] [--fields <field> [<field> ...]] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node (or instance uuid if --instance is specified) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--instance | <node> is an instance uuid. |
--fields <field> [<field> …] | One or more node fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.70. baremetal node trait list
List a node’s traits.
Usage:
openstack baremetal node trait list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.71. baremetal node undeploy
Set provision state of baremetal node to deleted
Usage:
openstack baremetal node undeploy [-h] [--wait [<time-out>]] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, available. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
11.72. baremetal node unrescue
Set provision state of baremetal node to unrescue
Usage:
openstack baremetal node unrescue [-h] [--wait [<time-out>]] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--wait [<time-out>] | Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely. |
11.73. baremetal node unset
Unset baremetal properties
Usage:
openstack baremetal node unset [-h] [--instance-uuid] [--name] [--resource-class] [--target-raid-config] [--property <key>] [--extra <key>] [--driver-info <key>] [--instance-info <key>] [--chassis-uuid] [--bios-interface] [--boot-interface] [--console-interface] [--deploy-interface] [--inspect-interface] [--management-interface] [--network-interface] [--power-interface] [--raid-interface] [--rescue-interface] [--storage-interface] [--vendor-interface] [--conductor-group] [--automated-clean] [--protected] [--protected-reason] [--owner] [--description] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--instance-uuid | Unset instance uuid on this baremetal node |
--name | Unset the name of the node |
--resource-class | Unset the resource class of the node |
--target-raid-config | Unset the target raid configuration of the node |
--property <key> | Property to unset on this baremetal node (repeat option to unset multiple properties) |
--extra <key> | Extra to unset on this baremetal node (repeat option to unset multiple extras) |
--driver-info <key> | Driver information to unset on this baremetal node (repeat option to unset multiple driver informations) |
--instance-info <key> | Instance information to unset on this baremetal node (repeat option to unset multiple instance informations) |
--chassis-uuid | Unset chassis uuid on this baremetal node |
--bios-interface | Unset bios interface on this baremetal node |
--boot-interface | Unset boot interface on this baremetal node |
--console-interface | Unset console interface on this baremetal node |
--deploy-interface | Unset deploy interface on this baremetal node |
--inspect-interface | Unset inspect interface on this baremetal node |
--management-interface | Unset management interface on this baremetal node |
--network-interface | Unset network interface on this baremetal node |
--power-interface | Unset power interface on this baremetal node |
--raid-interface | Unset raid interface on this baremetal node |
--rescue-interface | Unset rescue interface on this baremetal node |
--storage-interface | Unset storage interface on this baremetal node |
--vendor-interface | Unset vendor interface on this baremetal node |
--conductor-group | Unset conductor group for this baremetal node (the default group will be used) |
--automated-clean | Unset automated clean option on this baremetal node (the value from configuration will be used) |
--protected | Unset the protected flag on the node |
--protected-reason | Unset the protected reason (gets unset automatically when protected is unset) |
--owner | Unset the owner field of the node |
--description | Unset the description field of the node |
11.74. baremetal node validate
Validate a node’s driver interfaces
Usage:
openstack baremetal node validate [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.75. baremetal node vif attach
Attach VIF to a given node
Usage:
openstack baremetal node vif attach [-h] [--vif-info <key=value>] <node> <vif-id>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
<vif-id> | Name or uuid of the vif to attach to a node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--vif-info <key=value> | Record arbitrary key/value metadata. can be specified multiple times. The mandatory id parameter cannot be specified as a key. |
11.76. baremetal node vif detach
Detach VIF from a given node
Usage:
openstack baremetal node vif detach [-h] <node> <vif-id>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
<vif-id> | Name or uuid of the vif to detach from a node. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.77. baremetal node vif list
Show attached VIFs for a node
Usage:
openstack baremetal node vif list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] <node>
Value | Summary |
---|---|
<node> | Name or uuid of the node |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.78. baremetal port create
Create a new port
Usage:
openstack baremetal port create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] --node <uuid> [--uuid <uuid>] [--extra <key=value>] [--local-link-connection <key=value>] [-l <key=value>] [--pxe-enabled <boolean>] [--port-group <uuid>] [--physical-network <physical network>] [--is-smartnic] <address>
Value | Summary |
---|---|
<address> | Mac address for this port. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <uuid> | Uuid of the node that this port belongs to. |
--uuid <uuid> | Uuid of the port. |
--extra <key=value> | Record arbitrary key/value metadata. argument can be specified multiple times. |
--local-link-connection <key=value> | Key/value metadata describing local link connection information. Valid keys are switch_info, switch_id, port_id and hostname. The keys switch_id and port_id are required. In case of a Smart NIC port, the required keys are port_id and hostname. Argument can be specified multiple times. |
-l <key=value> | Deprecated. please use --local-link-connection instead. Key/value metadata describing Local link connection information. Valid keys are switch_info, switch_id, and port_id. The keys switch_id and port_id are required. Can be specified multiple times. |
--pxe-enabled <boolean> | Indicates whether this port should be used when pxe booting this Node. |
--port-group <uuid> | Uuid of the port group that this port belongs to. |
--physical-network <physical network> | Name of the physical network to which this port is connected. |
--is-smartnic | Indicates whether this port is a smart nic port |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.79. baremetal port delete
Delete port(s).
Usage:
openstack baremetal port delete [-h] <port> [<port> ...]
Value | Summary |
---|---|
<port> | Uuid(s) of the port(s) to delete. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.80. baremetal port group create
Create a new baremetal port group.
Usage:
openstack baremetal port group create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] --node <uuid> [--address <mac-address>] [--name NAME] [--uuid UUID] [--extra <key=value>] [--mode MODE] [--property <key=value>] [--support-standalone-ports | --unsupport-standalone-ports]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <uuid> | Uuid of the node that this port group belongs to. |
--address <mac-address> | Mac address for this port group. |
--name NAME | Name of the port group. |
--uuid UUID | Uuid of the port group. |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
--mode MODE | Mode of the port group. for possible values, refer to https://www.kernel.org/doc/Documentation/networking/bo nding.txt. |
--property <key=value> | Key/value property related to this port group’s configuration. Can be specified multiple times. |
--support-standalone-ports | Ports that are members of this port group can be used as stand-alone ports. (default) |
--unsupport-standalone-ports | Ports that are members of this port group cannot be used as stand-alone ports. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.81. baremetal port group delete
Unregister baremetal port group(s).
Usage:
openstack baremetal port group delete [-h] <port group> [<port group> ...]
Value | Summary |
---|---|
<port group> | Port group(s) to delete (name or uuid). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.82. baremetal port group list
List baremetal port groups.
Usage:
openstack baremetal port group list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--limit <limit>] [--marker <port group>] [--sort <key>[:<direction>]] [--address <mac-address>] [--node <node>] [--long | --fields <field> [<field> ...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--limit <limit> | Maximum number of port groups to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--marker <port group> | Port group uuid (for example, of the last port group in the list from a previous request). Returns the list of port groups after this UUID. |
--sort <key>[:<direction>] | Sort output by specified port group fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma. |
--address <mac-address> | Only show information for the port group with this mac address. |
--node <node> | Only list port groups of this node (name or uuid). |
--long | Show detailed information about the port groups. |
--fields <field> [<field> …] | One or more port group fields. only these fields will be fetched from the server. Can not be used when -- long is specified. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.83. baremetal port group set
Set baremetal port group properties.
Usage:
openstack baremetal port group set [-h] [--node <uuid>] [--address <mac-address>] [--name <name>] [--extra <key=value>] [--mode MODE] [--property <key=value>] [--support-standalone-ports | --unsupport-standalone-ports] <port group>
Value | Summary |
---|---|
<port group> | Name or uuid of the port group. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <uuid> | Update uuid of the node that this port group belongs to. |
--address <mac-address> | Mac address for this port group. |
--name <name> | Name of the port group. |
--extra <key=value> | Extra to set on this baremetal port group (repeat option to set multiple extras). |
--mode MODE | Mode of the port group. for possible values, refer to https://www.kernel.org/doc/Documentation/networking/bo nding.txt. |
--property <key=value> | Key/value property related to this port group’s configuration (repeat option to set multiple properties). |
--support-standalone-ports | Ports that are members of this port group can be used as stand-alone ports. |
--unsupport-standalone-ports | Ports that are members of this port group cannot be used as stand-alone ports. |
11.84. baremetal port group show
Show baremetal port group details.
Usage:
openstack baremetal port group show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--address] [--fields <field> [<field> ...]] <id>
Value | Summary |
---|---|
<id> | Uuid or name of the port group (or mac address if --address is specified). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--address | <id> is the mac address (instead of uuid or name) of the port group. |
--fields <field> [<field> …] | One or more port group fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.85. baremetal port group unset
Unset baremetal port group properties.
Usage:
openstack baremetal port group unset [-h] [--name] [--address] [--extra <key>] [--property <key>] <port group>
Value | Summary |
---|---|
<port group> | Name or uuid of the port group. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name | Unset the name of the port group. |
--address | Unset the address of the port group. |
--extra <key> | Extra to unset on this baremetal port group (repeat option to unset multiple extras). |
--property <key> | Property to unset on this baremetal port group (repeat option to unset multiple properties). |
11.86. baremetal port list
List baremetal ports.
Usage:
openstack baremetal port list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--address <mac-address>] [--node <node>] [--port-group <port group>] [--limit <limit>] [--marker <port>] [--sort <key>[:<direction>]] [--long | --fields <field> [<field> ...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--address <mac-address> | Only show information for the port with this mac address. |
--node <node> | Only list ports of this node (name or uuid). |
--port-group <port group> | Only list ports of this port group (name or uuid). |
--limit <limit> | Maximum number of ports to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--marker <port> | Port uuid (for example, of the last port in the list from a previous request). Returns the list of ports after this UUID. |
--sort <key>[:<direction>] | Sort output by specified port fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma. |
--long | Show detailed information about ports. |
--fields <field> [<field> …] | One or more port fields. only these fields will be fetched from the server. Can not be used when --long is specified. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.87. baremetal port set
Set baremetal port properties.
Usage:
openstack baremetal port set [-h] [--node <uuid>] [--address <address>] [--extra <key=value>] [--port-group <uuid>] [--local-link-connection <key=value>] [--pxe-enabled | --pxe-disabled] [--physical-network <physical network>] [--is-smartnic] <port>
Value | Summary |
---|---|
<port> | Uuid of the port |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <uuid> | Set uuid of the node that this port belongs to |
--address <address> | Set mac address for this port |
--extra <key=value> | Extra to set on this baremetal port (repeat option to set multiple extras) |
--port-group <uuid> | Set uuid of the port group that this port belongs to. |
--local-link-connection <key=value> | Key/value metadata describing local link connection information. Valid keys are switch_info, switch_id, port_id and hostname. The keys switch_id and port_id are required. In case of a Smart NIC port, the required keys are port_id and hostname. Argument can be specified multiple times. |
--pxe-enabled | Indicates that this port should be used when pxe booting this node (default) |
--pxe-disabled | Indicates that this port should not be used when pxe booting this node |
--physical-network <physical network> | Set the name of the physical network to which this port is connected. |
--is-smartnic | Set port to be smart nic port |
11.88. baremetal port show
Show baremetal port details.
Usage:
openstack baremetal port show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--address] [--fields <field> [<field> ...]] <id>
Value | Summary |
---|---|
<id> | Uuid of the port (or mac address if --address is specified). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--address | <id> is the mac address (instead of the uuid) of the port. |
--fields <field> [<field> …] | One or more port fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.89. baremetal port unset
Unset baremetal port properties.
Usage:
openstack baremetal port unset [-h] [--extra <key>] [--port-group] [--physical-network] [--is-smartnic] <port>
Value | Summary |
---|---|
<port> | Uuid of the port. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--extra <key> | Extra to unset on this baremetal port (repeat option to unset multiple extras) |
--port-group | Remove port from the port group |
--physical-network | Unset the physical network on this baremetal port. |
--is-smartnic | Set port as not smart nic port |
11.90. baremetal volume connector create
Create a new baremetal volume connector.
Usage:
openstack baremetal volume connector create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] --node <uuid> --type <type> --connector-id <connector id> [--uuid <uuid>] [--extra <key=value>]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <uuid> | Uuid of the node that this volume connector belongs to. |
--type <type> | Type of the volume connector. can be iqn, ip, mac, wwnn, wwpn, port, portgroup. |
--connector-id <connector id> | Id of the volume connector in the specified type. for example, the iSCSI initiator IQN for the node if the type is iqn. |
--uuid <uuid> | Uuid of the volume connector. |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.91. baremetal volume connector delete
Unregister baremetal volume connector(s).
Usage:
openstack baremetal volume connector delete [-h] <volume connector> [<volume connector> ...]
Value | Summary |
---|---|
<volume connector> | Uuid(s) of the volume connector(s) to delete. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
11.92. baremetal volume connector list
List baremetal volume connectors.
Usage:
openstack baremetal volume connector list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--node <node>] [--limit <limit>] [--marker <volume connector>] [--sort <key>[:<direction>]] [--long | --fields <field> [<field> ...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <node> | Only list volume connectors of this node (name or UUID). |
--limit <limit> | Maximum number of volume connectors to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service. |
--marker <volume connector> | Volume connector uuid (for example, of the last volume connector in the list from a previous request). Returns the list of volume connectors after this UUID. |
--sort <key>[:<direction>] | Sort output by specified volume connector fields and directions (asc or desc) (default:asc). Multiple fields and directions can be specified, separated by comma. |
--long | Show detailed information about volume connectors. |
--fields <field> [<field> …] | One or more volume connector fields. only these fields will be fetched from the server. Can not be used when --long is specified. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.93. baremetal volume connector set
Set baremetal volume connector properties.
Usage:
openstack baremetal volume connector set [-h] [--node <uuid>] [--type <type>] [--connector-id <connector id>] [--extra <key=value>] <volume connector>
Value | Summary |
---|---|
<volume connector> | Uuid of the volume connector. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <uuid> | Uuid of the node that this volume connector belongs to. |
--type <type> | Type of the volume connector. can be iqn, ip, mac, wwnn, wwpn, port, portgroup. |
--connector-id <connector id> | Id of the volume connector in the specified type. |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
11.94. baremetal volume connector show
Show baremetal volume connector details.
Usage:
openstack baremetal volume connector show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--fields <field> [<field> ...]] <id>
Value | Summary |
---|---|
<id> | Uuid of the volume connector. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--fields <field> [<field> …] | One or more volume connector fields. only these fields will be fetched from the server. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
11.95. baremetal volume connector unset
Unset baremetal volume connector properties.
Usage:
openstack baremetal volume connector unset [-h] [--extra <key>] <volume connector>
Value | Summary |
---|---|
<volume connector> | Uuid of the volume connector. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--extra <key> | Extra to unset (repeat option to unset multiple extras) |
11.96. baremetal volume target create
Create a new baremetal volume target.
Usage:
openstack baremetal volume target create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] --node <uuid> --type <volume type> [--property <key=value>] --boot-index <boot index> --volume-id <volume id> [--uuid <uuid>] [--extra <key=value>]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--node <uuid> | Uuid of the node that this volume target belongs to. |
--type <volume type> | Type of the volume target, e.g. iscsi, fibre_channel. |
--property <key=value> | Key/value property related to the type of this volume target. Can be specified multiple times. |
--boot-index <boot index> | Boot index of the volume target. |
--volume-id <volume id> | Id of the volume associated with this target. |
--uuid <uuid> | Uuid of the volume target. |
--extra <key=value> | Record arbitrary key/value metadata. can be specified multiple times. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |