Chapter 3. glance

admin_password = None

string value

The administrators password. If "use_user_token" is not in effect, then admin credentials can be specified.

admin_role = admin

string value

Role used to identify an authenticated user as administrator.

Provide a string value representing a Keystone role to identify an administrative user. Users with this role will be granted administrative privileges. The default value for this option is admin.

Possible values:

Related options:

admin_tenant_name = None

string value

The tenant name of the administrative user. If "use_user_token" is not in effect, then admin tenant name can be specified.

admin_user = None

string value

The administrators user name. If "use_user_token" is not in effect, then admin credentials can be specified.

allow_additional_image_properties = True

boolean value

Allow users to add additional/custom properties to images.

Glance defines a standard set of properties (in its schema) that appear on every image. These properties are also known as base properties. In addition to these properties, Glance allows users to add custom properties to images. These are known as additional properties.

By default, this configuration option is set to True and users are allowed to add additional properties. The number of additional properties that can be added to an image can be controlled via image_property_quota configuration option.

Possible values:

Related options:

allow_anonymous_access = False

boolean value

Allow limited access to unauthenticated users.

Assign a boolean to determine API access for unauthenticated users. When set to False, the API cannot be accessed by unauthenticated users. When set to True, unauthenticated users can access the API with read-only privileges. This however only applies when using ContextMiddleware.

Possible values:

Related options:

allowed_rpc_exception_modules = ['glance.common.exception', 'builtins', 'exceptions']

list value

List of allowed exception modules to handle RPC exceptions.

Provide a comma separated list of modules whose exceptions are permitted to be recreated upon receiving exception data via an RPC call made to Glance. The default list includes glance.common.exception, builtins, and exceptions.

The RPC protocol permits interaction with Glance via calls across a network or within the same system. Including a list of exception namespaces with this option enables RPC to propagate the exceptions back to the users.

Possible values:

Related options:

api_limit_max = 1000

integer value

Maximum number of results that could be returned by a request.

As described in the help text of limit_param_default, some requests may return multiple results. The number of results to be returned are governed either by the limit parameter in the request or the limit_param_default configuration option. The value in either case, can’t be greater than the absolute maximum defined by this configuration option. Anything greater than this value is trimmed down to the maximum value defined here.

Possible values:

Related options:

auth_region = None

string value

The region for the authentication service. If "use_user_token" is not in effect and using keystone auth, then region name can be specified.

auth_strategy = noauth

string value

The strategy to use for authentication. If "use_user_token" is not in effect, then auth strategy can be specified.

auth_url = None

string value

The URL to the keystone service. If "use_user_token" is not in effect and using keystone auth, then URL of keystone can be specified.

backlog = 4096

integer value

Set the number of incoming connection requests.

Provide a positive integer value to limit the number of requests in the backlog queue. The default queue size is 4096.

An incoming connection to a TCP listener socket is queued before a connection can be established with the server. Setting the backlog for a TCP socket ensures a limited queue size for incoming traffic.

Possible values:

Related options:

bind_host = 0.0.0.0

host address value

IP address to bind the glance servers to.

Provide an IP address to bind the glance server to. The default value is 0.0.0.0.

Edit this option to enable the server to listen on one particular IP address on the network card. This facilitates selection of a particular network interface for the server.

Possible values:

Related options:

bind_port = None

port value

Port number on which the server will listen.

Provide a valid port number to bind the server’s socket to. This port is then set to identify processes and forward network messages that arrive at the server. The default bind_port value for the API server is 9292 and for the registry server is 9191.

Possible values:

Related options:

ca_file = None

string value

Absolute path to the CA file.

Provide a string value representing a valid absolute path to the Certificate Authority file to use for client authentication.

A CA file typically contains necessary trusted certificates to use for the client authentication. This is essential to ensure that a secure connection is established to the server via the internet.

Possible values:

Related options:

cert_file = None

string value

Absolute path to the certificate file.

Provide a string value representing a valid absolute path to the certificate file which is required to start the API service securely.

A certificate file typically is a public key container and includes the server’s public key, server name, server information and the signature which was a result of the verification process using the CA certificate. This is required for a secure connection establishment.

Possible values:

Related options:

client_socket_timeout = 900

integer value

Timeout for client connections' socket operations.

Provide a valid integer value representing time in seconds to set the period of wait before an incoming connection can be closed. The default value is 900 seconds.

The value zero implies wait forever.

Possible values:

Related options:

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

control_exchange = openstack

string value

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

data_api = glance.db.sqlalchemy.api

string value

Python module path of data access API.

Specifies the path to the API to use for accessing the data model. This option determines how the image catalog data will be accessed.

Possible values:

If this option is set to glance.db.sqlalchemy.api then the image catalog data is stored in and read from the database via the SQLAlchemy Core and ORM APIs.

Setting this option to glance.db.registry.api will force all database access requests to be routed through the Registry service. This avoids data access from the Glance API nodes for an added layer of security, scalability and manageability.

Finally, when this configuration option is set to glance.db.simple.api, image catalog data is stored in and read from an in-memory data structure. This is primarily used for testing.

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

debug = False

boolean value

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

default_log_levels = ['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

list value

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

default_publisher_id = image.localhost

string value

Default publisher_id for outgoing Glance notifications.

This is the value that the notification driver will use to identify messages for events originating from the Glance service. Typically, this is the hostname of the instance that generated the message.

Possible values:

Related options:

delayed_delete = False

boolean value

Turn on/off delayed delete.

Typically when an image is deleted, the glance-api service puts the image into deleted state and deletes its data at the same time. Delayed delete is a feature in Glance that delays the actual deletion of image data until a later point in time (as determined by the configuration option scrub_time). When delayed delete is turned on, the glance-api service puts the image into pending_delete state upon deletion and leaves the image data in the storage backend for the image scrubber to delete at a later time. The image scrubber will move the image into deleted state upon successful deletion of image data.

Possible values:

Related options:

digest_algorithm = sha256

string value

Digest algorithm to use for digital signature.

Provide a string value representing the digest algorithm to use for generating digital signatures. By default, sha256 is used.

To get a list of the available algorithms supported by the version of OpenSSL on your platform, run the command: openssl list-message-digest-algorithms. Examples are sha1, sha256, and sha512.

Possible values:

Relation options:

disabled_notifications = []

list value

List of notifications to be disabled.

Specify a list of notifications that should not be emitted. A notification can be given either as a notification type to disable a single event notification, or as a notification group prefix to disable all event notifications within a group.

Possible values: A comma-separated list of individual notification types or notification groups to be disabled. Currently supported groups: image image.member task metadef_namespace metadef_object metadef_property metadef_resource_type metadef_tag For a complete listing and description of each event refer to: http://docs.openstack.org/developer/glance/notifications.html

The values must be specified as: <group_name>.<event_name>
For example: image.create,task.success,metadef_tag

Related options:

enable_v1_registry = True

boolean value

DEPRECATED FOR REMOVAL

Deprecated since: Newton

*Reason:*The Images (Glance) version 1 API has been DEPRECATED in the Newton release and will be removed on or after Pike release, following the standard OpenStack deprecation policy. Hence, the configuration options specific to the Images (Glance) v1 API are hereby deprecated and subject to removal. Operators are advised to deploy the Images (Glance) v2 API.

enable_v2_api = True

boolean value

Deploy the v2 OpenStack Images API.

When this option is set to True, Glance service will respond to requests on registered endpoints conforming to the v2 OpenStack Images API.

NOTES:

Possible values:

Related options:

Deprecated since: Newton

*Reason:*The Images (Glance) version 1 API has been DEPRECATED in the Newton release. It will be removed on or after Pike release, following the standard OpenStack deprecation policy. Once we remove the Images (Glance) v1 API, only the Images (Glance) v2 API can be deployed and will be enabled by default making this option redundant.

enable_v2_registry = True

boolean value

Deploy the v2 API Registry service.

When this option is set to True, the Registry service will be enabled in Glance for v2 API requests.

NOTES:

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

enabled_backends = None

dict value

Key:Value pair of store identifier and store type. In case of multiple backends should be separated using comma.

enabled_import_methods = ['glance-direct', 'web-download', 'copy-image']

list value

List of enabled Image Import Methods

'glance-direct', 'copy-image' and 'web-download' are enabled by default.

    Related options:
** [DEFAULT]/node_staging_uri

executor_thread_pool_size = 64

integer value

Size of executor thread pool when executor is threading or eventlet.

fatal_deprecations = False

boolean value

Enables or disables fatal status of deprecations.

hashing_algorithm = sha512

string value

Secure hashing algorithm used for computing the os_hash_value property.

This option configures the Glance "multihash", which consists of two image properties: the os_hash_algo and the os_hash_value. The os_hash_algo will be populated by the value of this configuration option, and the os_hash_value will be populated by the hexdigest computed when the algorithm is applied to the uploaded or imported image data.

The value must be a valid secure hash algorithm name recognized by the python hashlib library. You can determine what these are by examining the hashlib.algorithms_available data member of the version of the library being used in your Glance installation. For interoperability purposes, however, we recommend that you use the set of secure hash names supplied by the hashlib.algorithms_guaranteed data member because those algorithms are guaranteed to be supported by the hashlib library on all platforms. Thus, any image consumer using hashlib locally should be able to verify the os_hash_value of the image.

The default value of sha512 is a performant secure hash algorithm.

If this option is misconfigured, any attempts to store image data will fail. For that reason, we recommend using the default value.

Possible values:

Related options:

http_keepalive = True

boolean value

Set keep alive option for HTTP over TCP.

Provide a boolean value to determine sending of keep alive packets. If set to False, the server returns the header "Connection: close". If set to True, the server returns a "Connection: Keep-Alive" in its responses. This enables retention of the same TCP connection for HTTP conversations instead of opening a new one with each new request.

This option must be set to False if the client socket connection needs to be closed explicitly after the response is received and read successfully by the client.

Possible values:

Related options:

image_cache_dir = None

string value

Base directory for image cache.

This is the location where image data is cached and served out of. All cached images are stored directly under this directory. This directory also contains three subdirectories, namely, incomplete, invalid and queue.

The incomplete subdirectory is the staging area for downloading images. An image is first downloaded to this directory. When the image download is successful it is moved to the base directory. However, if the download fails, the partially downloaded image file is moved to the invalid subdirectory.

The queue`subdirectory is used for queuing images for download. This is used primarily by the cache-prefetcher, which can be scheduled as a periodic task like cache-pruner and cache-cleaner, to cache images ahead of their usage. Upon receiving the request to cache an image, Glance touches a file in the `queue directory with the image id as the file name. The cache-prefetcher, when running, polls for the files in queue directory and starts downloading them in the order they were created. When the download is successful, the zero-sized file is deleted from the queue directory. If the download fails, the zero-sized file remains and it’ll be retried the next time cache-prefetcher runs.

Possible values:

Related options:

image_cache_driver = sqlite

string value

The driver to use for image cache management.

This configuration option provides the flexibility to choose between the different image-cache drivers available. An image-cache driver is responsible for providing the essential functions of image-cache like write images to/read images from cache, track age and usage of cached images, provide a list of cached images, fetch size of the cache, queue images for caching and clean up the cache, etc.

The essential functions of a driver are defined in the base class glance.image_cache.drivers.base.Driver. All image-cache drivers (existing and prospective) must implement this interface. Currently available drivers are sqlite and xattr. These drivers primarily differ in the way they store the information about cached images:

Possible values:

Related options:

image_cache_max_size = 10737418240

integer value

The upper limit on cache size, in bytes, after which the cache-pruner cleans up the image cache.

Glance caches an image when it is downloaded. Consequently, the size of the image cache grows over time as the number of downloads increases. To keep the cache size from becoming unmanageable, it is recommended to run the cache-pruner as a periodic task. When the cache pruner is kicked off, it compares the current size of image cache and triggers a cleanup if the image cache grew beyond the size specified here. After the cleanup, the size of cache is less than or equal to size specified here.

Possible values:

Related options:

image_cache_sqlite_db = cache.db

string value

The relative path to sqlite file database that will be used for image cache management.

This is a relative path to the sqlite file database that tracks the age and usage statistics of image cache. The path is relative to image cache base directory, specified by the configuration option image_cache_dir.

This is a lightweight database with just one table.

Possible values:

Related options:

image_cache_stall_time = 86400

integer value

The amount of time, in seconds, an incomplete image remains in the cache.

Incomplete images are images for which download is in progress. Please see the description of configuration option image_cache_dir for more detail. Sometimes, due to various reasons, it is possible the download may hang and the incompletely downloaded image remains in the incomplete directory. This configuration option sets a time limit on how long the incomplete images should remain in the incomplete directory before they are cleaned up. Once an incomplete image spends more time than is specified here, it’ll be removed by cache-cleaner on its next run.

It is recommended to run cache-cleaner as a periodic task on the Glance API nodes to keep the incomplete images from occupying disk space.

Possible values:

Related options:

image_location_quota = 10

integer value

Maximum number of locations allowed on an image.

Any negative value is interpreted as unlimited.

Related options:

image_member_quota = 128

integer value

Maximum number of image members per image.

This limits the maximum of users an image can be shared with. Any negative value is interpreted as unlimited.

Related options:

image_property_quota = 128

integer value

Maximum number of properties allowed on an image.

This enforces an upper limit on the number of additional properties an image can have. Any negative value is interpreted as unlimited.

Related options:

image_size_cap = 1099511627776

integer value

Maximum size of image a user can upload in bytes.

An image upload greater than the size mentioned here would result in an image creation failure. This configuration option defaults to 1099511627776 bytes (1 TiB).

NOTES:

Possible values:

image_tag_quota = 128

integer value

Maximum number of tags allowed on an image.

Any negative value is interpreted as unlimited.

Related options:

`instance_format = [instance: %(uuid)s] `

string value

The format for an instance that is passed with the log message.

`instance_uuid_format = [instance: %(uuid)s] `

string value

The format for an instance UUID that is passed with the log message.

key_file = None

string value

Absolute path to a private key file.

Provide a string value representing a valid absolute path to a private key file which is required to establish the client-server connection.

Possible values:

Related options:

limit_param_default = 25

integer value

The default number of results to return for a request.

Responses to certain API requests, like list images, may return multiple items. The number of results returned can be explicitly controlled by specifying the limit parameter in the API request. However, if a limit parameter is not specified, this configuration value will be used as the default number of results to be returned for any API request.

NOTES:

Possible values:

Related options:

location_strategy = location_order

string value

Strategy to determine the preference order of image locations.

This configuration option indicates the strategy to determine the order in which an image’s locations must be accessed to serve the image’s data. Glance then retrieves the image data from the first responsive active location it finds in this list.

This option takes one of two possible values location_order and store_type. The default value is location_order, which suggests that image data be served by using locations in the order they are stored in Glance. The store_type value sets the image location preference based on the order in which the storage backends are listed as a comma separated list for the configuration option store_type_preference.

Possible values:

Related options:

log-config-append = None

string value

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

log-date-format = %Y-%m-%d %H:%M:%S

string value

Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.

log-dir = None

string value

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

log-file = None

string value

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

log_rotate_interval = 1

integer value

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is setto "interval".

log_rotate_interval_type = days

string value

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

log_rotation_type = none

string value

Log rotation type.

logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

string value

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

string value

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

string value

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

string value

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

string value

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

max_header_line = 16384

integer value

Maximum line size of message headers.

Provide an integer value representing a length to limit the size of message headers. The default value is 16384.

Setting max_header_line to 0 sets no limit for the line size of message headers.

Possible values:

Related options:

max_logfile_count = 30

integer value

Maximum number of rotated log files.

max_logfile_size_mb = 200

integer value

Log file maximum size in MB. This option is ignored if "log_rotation_type" is not set to "size".

max_request_id_length = 64

integer value

Limit the request ID length.

Provide an integer value to limit the length of the request ID to the specified length. The default value is 64. Users can change this to any ineteger value between 0 and 16384 however keeping in mind that a larger value may flood the logs.

Possible values:

Related options:

metadata_encryption_key = None

string value

AES key for encrypting store location metadata.

Provide a string value representing the AES cipher to use for encrypting Glance store metadata.

Possible values:

Related options:

node_staging_uri = file:///tmp/staging/

string value

The URL provides location where the temporary data will be stored

This option is for Glance internal use only. Glance will save the image data uploaded by the user to staging endpoint during the image import process.

This option does not change the staging API endpoint by any means.

Possible values:

Related options:

owner_is_tenant = True

boolean value

Set the image owner to tenant or the authenticated user.

Assign a boolean value to determine the owner of an image. When set to True, the owner of the image is the tenant. When set to False, the owner of the image will be the authenticated user issuing the request. Setting it to False makes the image private to the associated user and sharing with other users within the same tenant (or "project") requires explicit image sharing via image membership.

Possible values:

Related options:

Deprecated since: Rocky

Reason: The non-default setting for this option misaligns Glance with other OpenStack services with respect to resource ownership. Further, surveys indicate that this option is not used by operators. The option will be removed early in the S development cycle following the standard OpenStack deprecation policy. As the option is not in wide use, no migration path is proposed.

property_protection_file = None

string value

The location of the property protection file.

Provide a valid path to the property protection file which contains the rules for property protections and the roles/policies associated with them.

A property protection file, when set, restricts the Glance image properties to be created, read, updated and/or deleted by a specific set of users that are identified by either roles or policies. If this configuration option is not set, by default, property protections won’t be enforced. If a value is specified and the file is not found, the glance-api service will fail to start. More information on property protections can be found at: https://docs.openstack.org/glance/latest/admin/property-protections.html

Possible values:

Related options:

property_protection_rule_format = roles

string value

Rule format for property protection.

Provide the desired way to set property protection on Glance image properties. The two permissible values are roles and policies. The default value is roles.

If the value is roles, the property protection file must contain a comma separated list of user roles indicating permissions for each of the CRUD operations on each property being protected. If set to policies, a policy defined in policy.json is used to express property protections for each of the CRUD operations. Examples of how property protections are enforced based on roles or policies can be found at: https://docs.openstack.org/glance/latest/admin/property-protections.html#examples

Possible values:

Related options:

public_endpoint = None

string value

Public url endpoint to use for Glance versions response.

This is the public url endpoint that will appear in the Glance "versions" response. If no value is specified, the endpoint that is displayed in the version’s response is that of the host running the API service. Change the endpoint to represent the proxy URL if the API service is running behind a proxy. If the service is running behind a load balancer, add the load balancer’s URL for this value.

Possible values:

Related options:

publish_errors = False

boolean value

Enables or disables publication of error events.

pydev_worker_debug_host = None

host address value

Host address of the pydev server.

Provide a string value representing the hostname or IP of the pydev server to use for debugging. The pydev server listens for debug connections on this address, facilitating remote debugging in Glance.

Possible values:

Related options:

pydev_worker_debug_port = 5678

port value

Port number that the pydev server will listen on.

Provide a port number to bind the pydev server to. The pydev process accepts debug connections on this port and facilitates remote debugging in Glance.

Possible values:

Related options:

rate_limit_burst = 0

integer value

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level = CRITICAL

string value

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

rate_limit_interval = 0

integer value

Interval, number of seconds, of log rate limiting.

registry_client_ca_file = None

string value

Absolute path to the Certificate Authority file.

Provide a string value representing a valid absolute path to the certificate authority file to use for establishing a secure connection to the registry server.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

registry_client_cert_file = None

string value

Absolute path to the certificate file.

Provide a string value representing a valid absolute path to the certificate file to use for establishing a secure connection to the registry server.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

registry_client_insecure = False

boolean value

Set verification of the registry server certificate.

Provide a boolean value to determine whether or not to validate SSL connections to the registry server. By default, this option is set to False and the SSL connections are validated.

If set to True, the connection to the registry server is not validated via a certifying authority and the registry_client_ca_file option is ignored. This is the registry’s equivalent of specifying --insecure on the command line using glanceclient for the API.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

registry_client_key_file = None

string value

Absolute path to the private key file.

Provide a string value representing a valid absolute path to the private key file to use for establishing a secure connection to the registry server.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

registry_client_protocol = http

string value

Protocol to use for communication with the registry server.

Provide a string value representing the protocol to use for communication with the registry server. By default, this option is set to http and the connection is not secure.

This option can be set to https to establish a secure connection to the registry server. In this case, provide a key to use for the SSL connection using the registry_client_key_file option. Also include the CA file and cert file using the options registry_client_ca_file and registry_client_cert_file respectively.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

registry_client_timeout = 600

integer value

Timeout value for registry requests.

Provide an integer value representing the period of time in seconds that the API server will wait for a registry request to complete. The default value is 600 seconds.

A value of 0 implies that a request will never timeout.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

registry_host = 0.0.0.0

host address value

Address the registry server is hosted on.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

registry_port = 9191

port value

Port the registry server is listening on.

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

rpc_conn_pool_size = 30

integer value

Size of RPC connection pool.

rpc_response_timeout = 60

integer value

Seconds to wait for a response from a call.

scrub_pool_size = 1

integer value

The size of thread pool to be used for scrubbing images.

When there are a large number of images to scrub, it is beneficial to scrub images in parallel so that the scrub queue stays in control and the backend storage is reclaimed in a timely fashion. This configuration option denotes the maximum number of images to be scrubbed in parallel. The default value is one, which signifies serial scrubbing. Any value above one indicates parallel scrubbing.

Possible values:

Related options:

scrub_time = 0

integer value

The amount of time, in seconds, to delay image scrubbing.

When delayed delete is turned on, an image is put into pending_delete state upon deletion until the scrubber deletes its image data. Typically, soon after the image is put into pending_delete state, it is available for scrubbing. However, scrubbing can be delayed until a later point using this configuration option. This option denotes the time period an image spends in pending_delete state before it is available for scrubbing.

It is important to realize that this has storage implications. The larger the scrub_time, the longer the time to reclaim backend storage from deleted images.

Possible values:

Related options:

secure_proxy_ssl_header = None

string value

The HTTP header used to determine the scheme for the original request, even if it was removed by an SSL terminating proxy. Typical value is "HTTP_X_FORWARDED_PROTO".

send_identity_headers = False

boolean value

Send headers received from identity when making requests to registry.

Typically, Glance registry can be deployed in multiple flavors, which may or may not include authentication. For example, trusted-auth is a flavor that does not require the registry service to authenticate the requests it receives. However, the registry service may still need a user context to be populated to serve the requests. This can be achieved by the caller (the Glance API usually) passing through the headers it received from authenticating with identity for the same request. The typical headers sent are X-User-Id, X-Tenant-Id, X-Roles, X-Identity-Status and X-Service-Catalog.

Provide a boolean value to determine whether to send the identity headers to provide tenant and user information along with the requests to registry service. By default, this option is set to False, which means that user and tenant information is not available readily. It must be obtained by authenticating. Hence, if this is set to False, flavor must be set to value that either includes authentication or authenticated user context.

Possible values:

Related options:

show_image_direct_url = False

boolean value

Show direct image location when returning an image.

This configuration option indicates whether to show the direct image location when returning image details to the user. The direct image location is where the image data is stored in backend storage. This image location is shown under the image property direct_url.

When multiple image locations exist for an image, the best location is displayed based on the location strategy indicated by the configuration option location_strategy.

NOTES:

Possible values:

Related options:

show_multiple_locations = False

boolean value

Show all image locations when returning an image.

This configuration option indicates whether to show all the image locations when returning image details to the user. When multiple image locations exist for an image, the locations are ordered based on the location strategy indicated by the configuration opt location_strategy. The image locations are shown under the image property locations.

NOTES:

Possible values:

Related options:

Deprecated since: Newton

*Reason:*Use of this option, deprecated since Newton, is a security risk and will be removed once we figure out a way to satisfy those use cases that currently require it. An earlier announcement that the same functionality can be achieved with greater granularity by using policies is incorrect. You cannot work around this option via policy configuration at the present time, though that is the direction we believe the fix will take. Please keep an eye on the Glance release notes to stay up to date on progress in addressing this issue.

syslog-log-facility = LOG_USER

string value

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

tcp_keepidle = 600

integer value

Set the wait time before a connection recheck.

Provide a positive integer value representing time in seconds which is set as the idle wait time before a TCP keep alive packet can be sent to the host. The default value is 600 seconds.

Setting tcp_keepidle helps verify at regular intervals that a connection is intact and prevents frequent TCP connection reestablishment.

Possible values:

Related options:

transport_url = rabbit://

string value

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

use-journal = False

boolean value

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

use-json = False

boolean value

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use-syslog = False

boolean value

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_eventlog = False

boolean value

Log output to Windows Event Log.

use_stderr = False

boolean value

Log output to standard error. This option is ignored if log_config_append is set.

use_user_token = True

boolean value

Whether to pass through the user token when making requests to the registry. To prevent failures with token expiration during big files upload, it is recommended to set this parameter to False.If "use_user_token" is not in effect, then admin credentials can be specified.

user_storage_quota = 0

string value

Maximum amount of image storage per tenant.

This enforces an upper limit on the cumulative storage consumed by all images of a tenant across all stores. This is a per-tenant limit.

The default unit for this configuration option is Bytes. However, storage units can be specified using case-sensitive literals B, KB, MB, GB and TB representing Bytes, KiloBytes, MegaBytes, GigaBytes and TeraBytes respectively. Note that there should not be any space between the value and unit. Value 0 signifies no quota enforcement. Negative values are invalid and result in errors.

Possible values:

Related options:

watch-log-file = False

boolean value

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

workers = None

integer value

Number of Glance worker processes to start.

Provide a non-negative integer value to set the number of child process workers to service requests. By default, the number of CPUs available is set as the value for workers limited to 8. For example if the processor count is 6, 6 workers will be used, if the processor count is 24 only 8 workers will be used. The limit will only apply to the default value, if 24 workers is configured, 24 is used.

Each worker process is made to listen on the port set in the configuration file and contains a greenthread pool of size 1000.

Possible values:

Related options:

cinder_api_insecure = False

boolean value

Allow to perform insecure SSL requests to cinder.

If this option is set to True, HTTPS endpoint connection is verified using the CA certificates file specified by cinder_ca_certificates_file option.

Possible values:

Related options:

cinder_ca_certificates_file = None

string value

Location of a CA certificates file used for cinder client requests.

The specified CA certificates file, if set, is used to verify cinder connections via HTTPS endpoint. If the endpoint is HTTP, this value is ignored. cinder_api_insecure must be set to True to enable the verification.

Possible values:

Related options:

cinder_catalog_info = volumev2::publicURL

string value

Information to match when looking for cinder in the service catalog.

When the cinder_endpoint_template is not set and any of cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, cinder_store_password is not set, cinder store uses this information to lookup cinder endpoint from the service catalog in the current context. cinder_os_region_name, if set, is taken into consideration to fetch the appropriate endpoint.

The service catalog can be listed by the openstack catalog list command.

Possible values:

Related options:

cinder_endpoint_template = None

string value

Override service catalog lookup with template for cinder endpoint.

When this option is set, this value is used to generate cinder endpoint, instead of looking up from the service catalog. This value is ignored if cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, and cinder_store_password are specified.

If this configuration option is set, cinder_catalog_info will be ignored.

Possible values:

Related options:

cinder_enforce_multipath = False

boolean value

If this is set to True, attachment of volumes for image transfer will be aborted when multipathd is not running. Otherwise, it will fallback to single path.

Possible values:

Related options:

cinder_http_retries = 3

integer value

Number of cinderclient retries on failed http calls.

When a call failed by any errors, cinderclient will retry the call up to the specified times after sleeping a few seconds.

Possible values:

Related options:

cinder_mount_point_base = /var/lib/glance/mnt

string value

Directory where the NFS volume is mounted on the glance node.

Possible values:

cinder_os_region_name = None

string value

Region name to lookup cinder service from the service catalog.

This is used only when cinder_catalog_info is used for determining the endpoint. If set, the lookup for cinder endpoint by this node is filtered to the specified region. It is useful when multiple regions are listed in the catalog. If this is not set, the endpoint is looked up from every region.

Possible values:

Related options:

cinder_state_transition_timeout = 300

integer value

Time period, in seconds, to wait for a cinder volume transition to complete.

When the cinder volume is created, deleted, or attached to the glance node to read/write the volume data, the volume’s state is changed. For example, the newly created volume status changes from creating to available after the creation process is completed. This specifies the maximum time to wait for the status change. If a timeout occurs while waiting, or the status is changed to an unexpected value (e.g. error), the image creation fails.

Possible values:

Related options:

cinder_store_auth_address = None

string value

The address where the cinder authentication service is listening.

When all of cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, and cinder_store_password options are specified, the specified values are always used for the authentication. This is useful to hide the image volumes from users by storing them in a project/tenant specific to the image service. It also enables users to share the image volume among other projects under the control of glance’s ACL.

If either of these options are not set, the cinder endpoint is looked up from the service catalog, and current context’s user and project are used.

Possible values:

Related options:

cinder_store_password = None

string value

Password for the user authenticating against cinder.

This must be used with all the following related options. If any of these are not specified, the user of the current context is used.

Possible values:

Related options:

cinder_store_project_name = None

string value

Project name where the image volume is stored in cinder.

If this configuration option is not set, the project in current context is used.

This must be used with all the following related options. If any of these are not specified, the project of the current context is used.

Possible values:

Related options:

cinder_store_user_name = None

string value

User name to authenticate against cinder.

This must be used with all the following related options. If any of these are not specified, the user of the current context is used.

Possible values:

Related options:

cinder_use_multipath = False

boolean value

Flag to identify multipath is supported or not in the deployment.

Set it to False if multipath is not supported.

Possible values:

Related options:

cinder_volume_type = None

string value

Volume type that will be used for volume creation in cinder.

Some cinder backends can have several volume types to optimize storage usage. Adding this option allows an operator to choose a specific volume type in cinder that can be optimized for images.

If this is not set, then the default volume type specified in the cinder configuration will be used for volume creation.

Possible values:

Related options:

rootwrap_config = /etc/glance/rootwrap.conf

string value

Path to the rootwrap configuration file to use for running commands as root.

The cinder store requires root privileges to operate the image volumes (for connecting to iSCSI/FC volumes and reading/writing the volume data, etc.). The configuration file should allow the required commands by cinder store and os-brick library.

Possible values:

Related options:

allow_credentials = True

boolean value

Indicate that the actual request can include user credentials

allow_headers = ['Content-MD5', 'X-Image-Meta-Checksum', 'X-Storage-Token', 'Accept-Encoding', 'X-Auth-Token', 'X-Identity-Status', 'X-Roles', 'X-Service-Catalog', 'X-User-Id', 'X-Tenant-Id', 'X-OpenStack-Request-ID']

list value

Indicate which header field names may be used during the actual request.

allow_methods = ['GET', 'PUT', 'POST', 'DELETE', 'PATCH']

list value

Indicate which methods can be used during the actual request.

allowed_origin = None

list value

Indicate whether this resource may be shared with the domain received in the requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing slash. Example: https://horizon.example.com

expose_headers = ['X-Image-Meta-Checksum', 'X-Auth-Token', 'X-Subject-Token', 'X-Service-Token', 'X-OpenStack-Request-ID']

list value

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age = 3600

integer value

Maximum cache age of CORS preflight requests.

backend = sqlalchemy

string value

The back end to use for the database.

connection = None

string value

The SQLAlchemy connection string to use to connect to the database.

connection_debug = 0

integer value

Verbosity of SQL debugging information: 0=None, 100=Everything.

`connection_parameters = `

string value

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…​

connection_recycle_time = 3600

integer value

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

connection_trace = False

boolean value

Add Python stack traces to SQL as comment strings.

db_inc_retry_interval = True

boolean value

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retries = 20

integer value

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

db_max_retry_interval = 10

integer value

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_retry_interval = 1

integer value

Seconds between retries of a database transaction.

max_overflow = 50

integer value

If set, use this value for max_overflow with SQLAlchemy.

max_pool_size = 5

integer value

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries = 10

integer value

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

mysql_enable_ndb = False

boolean value

If True, transparently enables support for handling MySQL Cluster (NDB).

mysql_sql_mode = TRADITIONAL

string value

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

pool_timeout = None

integer value

If set, use this value for pool_timeout with SQLAlchemy.

retry_interval = 10

integer value

Interval between retries of opening a SQL connection.

slave_connection = None

string value

The SQLAlchemy connection string to use to connect to the slave database.

sqlite_synchronous = True

boolean value

If True, SQLite uses synchronous mode.

use_db_reconnect = False

boolean value

Enable the experimental use of database reconnect on connection lost.

use_tpool = False

boolean value

Enable the experimental use of thread pooling for all DB API calls

filesystem_store_chunk_size = 65536

integer value

Chunk size, in bytes.

The chunk size used when reading or writing image files. Raising this value may improve the throughput but it may also slightly increase the memory usage when handling a large number of requests.

Possible Values:

Related options:

filesystem_store_datadir = /var/lib/glance/images

string value

Directory to which the filesystem backend store writes images.

Upon start up, Glance creates the directory if it doesn’t already exist and verifies write access to the user under which glance-api runs. If the write access isn’t available, a BadStoreConfiguration exception is raised and the filesystem store may not be available for adding new images.

Possible values:

Related options:

filesystem_store_datadirs = None

multi valued

List of directories and their priorities to which the filesystem backend store writes images.

The filesystem store can be configured to store images in multiple directories as opposed to using a single directory specified by the filesystem_store_datadir configuration option. When using multiple directories, each directory can be given an optional priority to specify the preference order in which they should be used. Priority is an integer that is concatenated to the directory path with a colon where a higher value indicates higher priority. When two directories have the same priority, the directory with most free space is used. When no priority is specified, it defaults to zero.

More information on configuring filesystem store with multiple store directories can be found at https://docs.openstack.org/glance/latest/configuration/configuring.html

Possible values:

Related options:

filesystem_store_file_perm = 0

integer value

File access permissions for the image files.

Set the intended file access permissions for image data. This provides a way to enable other services, e.g. Nova, to consume images directly from the filesystem store. The users running the services that are intended to be given access to could be made a member of the group that owns the files created. Assigning a value less then or equal to zero for this configuration option signifies that no changes be made to the default permissions. This value will be decoded as an octal digit.

For more information, please refer the documentation at https://docs.openstack.org/glance/latest/configuration/configuring.html

Possible values:

Related options:

filesystem_store_metadata_file = None

string value

Filesystem store metadata file.

The path to a file which contains the metadata to be returned with any location associated with the filesystem store. The file must contain a valid JSON object. The object should contain the keys id and mountpoint. The value for both keys should be a string.

Possible values:

Related options:

filesystem_thin_provisioning = False

boolean value

Enable or not thin provisioning in this backend.

This configuration option enable the feature of not really write null byte sequences on the filesystem, the holes who can appear will automatically be interpreted by the filesystem as null bytes, and do not really consume your storage. Enabling this feature will also speed up image upload and save network traffic in addition to save space in the backend, as null bytes sequences are not sent over the network.

Possible Values:

Related options:

http_proxy_information = {}

dict value

The http/https proxy information to be used to connect to the remote server.

This configuration option specifies the http/https proxy information that should be used to connect to the remote server. The proxy information should be a key value pair of the scheme and proxy, for example, http:10.0.0.1:3128. You can also specify proxies for multiple schemes by separating the key value pairs with a comma, for example, http:10.0.0.1:3128, https:10.0.0.1:1080.

Possible values:

Related options:

https_ca_certificates_file = None

string value

Path to the CA bundle file.

This configuration option enables the operator to use a custom Certificate Authority file to verify the remote server certificate. If this option is set, the https_insecure option will be ignored and the CA file specified will be used to authenticate the server certificate and establish a secure connection to the server.

Possible values:

Related options:

https_insecure = True

boolean value

Set verification of the remote server certificate.

This configuration option takes in a boolean value to determine whether or not to verify the remote server certificate. If set to True, the remote server certificate is not verified. If the option is set to False, then the default CA truststore is used for verification.

This option is ignored if https_ca_certificates_file is set. The remote server certificate will then be verified using the file specified using the https_ca_certificates_file option.

Possible values:

Related options:

rados_connect_timeout = 0

integer value

Timeout value for connecting to Ceph cluster.

This configuration option takes in the timeout value in seconds used when connecting to the Ceph cluster i.e. it sets the time to wait for glance-api before closing the connection. This prevents glance-api hangups during the connection to RBD. If the value for this option is set to less than or equal to 0, no timeout is set and the default librados value is used.

Possible Values:

Related options:

`rbd_store_ceph_conf = `

string value

Ceph configuration file path.

This configuration option specifies the path to the Ceph configuration file to be used. If the value for this option is not set by the user or is set to the empty string, librados will read the standard ceph.conf file by searching the default Ceph configuration file locations in sequential order. See the Ceph documentation for details.

NOTE 2: If you leave this option empty (the default), the actual Ceph configuration file used may change depending on what version of librados is being used. If it is important for you to know exactly which configuration file is in effect, you may specify that file here using this option.

Possible Values:

Related options:

rbd_store_chunk_size = 8

integer value

Size, in megabytes, to chunk RADOS images into.

Provide an integer value representing the size in megabytes to chunk Glance images into. The default chunk size is 8 megabytes. For optimal performance, the value should be a power of two.

When Ceph’s RBD object storage system is used as the storage backend for storing Glance images, the images are chunked into objects of the size set using this option. These chunked objects are then stored across the distributed block data store to use for Glance.

Possible Values:

Related options:

rbd_store_pool = images

string value

RADOS pool in which images are stored.

When RBD is used as the storage backend for storing Glance images, the images are stored by means of logical grouping of the objects (chunks of images) into a pool. Each pool is defined with the number of placement groups it can contain. The default pool that is used is images.

More information on the RBD storage backend can be found here: http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/

Possible Values:

Related options:

rbd_store_user = None

string value

RADOS user to authenticate as.

This configuration option takes in the RADOS user to authenticate as. This is only needed when RADOS authentication is enabled and is applicable only if the user is using Cephx authentication. If the value for this option is not set by the user or is set to None, a default value will be chosen, which will be based on the client. section in rbd_store_ceph_conf.

Possible Values:

Related options:

rbd_thin_provisioning = False

boolean value

Enable or not thin provisioning in this backend.

This configuration option enable the feature of not really write null byte sequences on the RBD backend, the holes who can appear will automatically be interpreted by Ceph as null bytes, and do not really consume your storage. Enabling this feature will also speed up image upload and save network traffic in addition to save space in the backend, as null bytes sequences are not sent over the network.

Possible Values:

Related options:

sheepdog_store_address = 127.0.0.1

host address value

Address to bind the Sheepdog daemon to.

Provide a string value representing the address to bind the Sheepdog daemon to. The default address set for the sheep is 127.0.0.1.

The Sheepdog daemon, also called sheep, manages the storage in the distributed cluster by writing objects across the storage network. It identifies and acts on the messages directed to the address set using sheepdog_store_address option to store chunks of Glance images.

Possible values:

Related Options:

Deprecated since: Train

Reason: The Sheepdog project is no longer actively maintained. The Sheepdog driver is scheduled for removal in the U development cycle.

sheepdog_store_chunk_size = 64

integer value

Chunk size for images to be stored in Sheepdog data store.

Provide an integer value representing the size in mebibyte (1048576 bytes) to chunk Glance images into. The default chunk size is 64 mebibytes.

When using Sheepdog distributed storage system, the images are chunked into objects of this size and then stored across the distributed data store to use for Glance.

Chunk sizes, if a power of two, help avoid fragmentation and enable improved performance.

Possible values:

Related Options:

Deprecated since: Train

Reason: The Sheepdog project is no longer actively maintained. The Sheepdog driver is scheduled for removal in the U development cycle.

sheepdog_store_port = 7000

port value

Port number on which the sheep daemon will listen.

Provide an integer value representing a valid port number on which you want the Sheepdog daemon to listen on. The default port is 7000.

The Sheepdog daemon, also called sheep, manages the storage in the distributed cluster by writing objects across the storage network. It identifies and acts on the messages it receives on the port number set using sheepdog_store_port option to store chunks of Glance images.

Possible values:

Related Options:

Deprecated since: Train

Reason: The Sheepdog project is no longer actively maintained. The Sheepdog driver is scheduled for removal in the U development cycle.

default_swift_reference = ref1

string value

Reference to default Swift account/backing store parameters.

Provide a string value representing a reference to the default set of parameters required for using swift account/backing store for image storage. The default reference value for this configuration option is ref1. This configuration option dereferences the parameters and facilitates image storage in Swift storage backend every time a new image is added.

Possible values:

Related options:

swift_buffer_on_upload = False

boolean value

Buffer image segments before upload to Swift.

Provide a boolean value to indicate whether or not Glance should buffer image data to disk while uploading to swift. This enables Glance to resume uploads on error.

NOTES: When enabling this option, one should take great care as this increases disk usage on the API node. Be aware that depending upon how the file system is configured, the disk space used for buffering may decrease the actual disk space available for the glance image cache. Disk utilization will cap according to the following equation: (swift_store_large_object_chunk_size * workers * 1000)

Possible values:

Related options:

swift_store_admin_tenants = []

list value

List of tenants that will be granted admin access.

This is a list of tenants that will be granted read/write access on all Swift containers created by Glance in multi-tenant mode. The default value is an empty list.

Possible values:

Related options:

swift_store_auth_address = None

string value

The address where the Swift authentication service is listening.

swift_store_auth_insecure = False

boolean value

Set verification of the server certificate.

This boolean determines whether or not to verify the server certificate. If this option is set to True, swiftclient won’t check for a valid SSL certificate when authenticating. If the option is set to False, then the default CA truststore is used for verification.

Possible values:

Related options:

swift_store_auth_version = 2

string value

Version of the authentication service to use. Valid versions are 2 and 3 for keystone and 1 (deprecated) for swauth and rackspace.

swift_store_cacert = None

string value

Path to the CA bundle file.

This configuration option enables the operator to specify the path to a custom Certificate Authority file for SSL verification when connecting to Swift.

Possible values:

Related options:

swift_store_config_file = None

string value

Absolute path to the file containing the swift account(s) configurations.

Include a string value representing the path to a configuration file that has references for each of the configured Swift account(s)/backing stores. By default, no file path is specified and customized Swift referencing is disabled. Configuring this option is highly recommended while using Swift storage backend for image storage as it avoids storage of credentials in the database.

Possible values:

Related options:

swift_store_container = glance

string value

Name of single container to store images/name prefix for multiple containers

When a single container is being used to store images, this configuration option indicates the container within the Glance account to be used for storing all images. When multiple containers are used to store images, this will be the name prefix for all containers. Usage of single/multiple containers can be controlled using the configuration option swift_store_multiple_containers_seed.

When using multiple containers, the containers will be named after the value set for this configuration option with the first N chars of the image UUID as the suffix delimited by an underscore (where N is specified by swift_store_multiple_containers_seed).

Example: if the seed is set to 3 and swift_store_container = glance, then an image with UUID fdae39a1-bac5-4238-aba4-69bcc726e848 would be placed in the container glance_fda. All dashes in the UUID are included when creating the container name but do not count toward the character limit, so when N=10 the container name would be glance_fdae39a1-ba.

Possible values:

Related options:

swift_store_create_container_on_put = False

boolean value

Create container, if it doesn’t already exist, when uploading image.

At the time of uploading an image, if the corresponding container doesn’t exist, it will be created provided this configuration option is set to True. By default, it won’t be created. This behavior is applicable for both single and multiple containers mode.

Possible values:

Related options:

swift_store_endpoint = None

string value

The URL endpoint to use for Swift backend storage.

Provide a string value representing the URL endpoint to use for storing Glance images in Swift store. By default, an endpoint is not set and the storage URL returned by auth is used. Setting an endpoint with swift_store_endpoint overrides the storage URL and is used for Glance image storage.

Possible values:

Related Options:

swift_store_endpoint_type = publicURL

string value

Endpoint Type of Swift service.

This string value indicates the endpoint type to use to fetch the Swift endpoint. The endpoint type determines the actions the user will be allowed to perform, for instance, reading and writing to the Store. This setting is only used if swift_store_auth_version is greater than 1.

Possible values:

Related options:

swift_store_expire_soon_interval = 60

integer value

Time in seconds defining the size of the window in which a new token may be requested before the current token is due to expire.

Typically, the Swift storage driver fetches a new token upon the expiration of the current token to ensure continued access to Swift. However, some Swift transactions (like uploading image segments) may not recover well if the token expires on the fly.

Hence, by fetching a new token before the current token expiration, we make sure that the token does not expire or is close to expiry before a transaction is attempted. By default, the Swift storage driver requests for a new token 60 seconds or less before the current token expiration.

Possible values:

Related Options:

swift_store_key = None

string value

Auth key for the user authenticating against the Swift authentication service.

swift_store_large_object_chunk_size = 200

integer value

The maximum size, in MB, of the segments when image data is segmented.

When image data is segmented to upload images that are larger than the limit enforced by the Swift cluster, image data is broken into segments that are no bigger than the size specified by this configuration option. Refer to swift_store_large_object_size for more detail.

For example: if swift_store_large_object_size is 5GB and swift_store_large_object_chunk_size is 1GB, an image of size 6.2GB will be segmented into 7 segments where the first six segments will be 1GB in size and the seventh segment will be 0.2GB.

Possible values:

Related options:

swift_store_large_object_size = 5120

integer value

The size threshold, in MB, after which Glance will start segmenting image data.

Swift has an upper limit on the size of a single uploaded object. By default, this is 5GB. To upload objects bigger than this limit, objects are segmented into multiple smaller objects that are tied together with a manifest file. For more detail, refer to https://docs.openstack.org/swift/latest/overview_large_objects.html

This configuration option specifies the size threshold over which the Swift driver will start segmenting image data into multiple smaller files. Currently, the Swift driver only supports creating Dynamic Large Objects.

Possible values:

Related options:

swift_store_multi_tenant = False

boolean value

Store images in tenant’s Swift account.

This enables multi-tenant storage mode which causes Glance images to be stored in tenant specific Swift accounts. If this is disabled, Glance stores all images in its own account. More details multi-tenant store can be found at https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage

Possible values:

Related options:

swift_store_multiple_containers_seed = 0

integer value

Seed indicating the number of containers to use for storing images.

When using a single-tenant store, images can be stored in one or more than one containers. When set to 0, all images will be stored in one single container. When set to an integer value between 1 and 32, multiple containers will be used to store images. This configuration option will determine how many containers are created. The total number of containers that will be used is equal to 16^N, so if this config option is set to 2, then 16^2=256 containers will be used to store images.

Please refer to swift_store_container for more detail on the naming convention. More detail about using multiple containers can be found at https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-multiple-containers.html

Possible values:

Related options:

swift_store_region = None

string value

The region of Swift endpoint to use by Glance.

Provide a string value representing a Swift region where Glance can connect to for image storage. By default, there is no region set.

When Glance uses Swift as the storage backend to store images for a specific tenant that has multiple endpoints, setting of a Swift region with swift_store_region allows Glance to connect to Swift in the specified region as opposed to a single region connectivity.

This option can be configured for both single-tenant and multi-tenant storage.

Possible values:

Related Options:

swift_store_retry_get_count = 0

integer value

The number of times a Swift download will be retried before the request fails.

Provide an integer value representing the number of times an image download must be retried before erroring out. The default value is zero (no retry on a failed image download). When set to a positive integer value, swift_store_retry_get_count ensures that the download is attempted this many more times upon a download failure before sending an error message.

Possible values:

Related Options:

swift_store_service_type = object-store

string value

Type of Swift service to use.

Provide a string value representing the service type to use for storing images while using Swift backend storage. The default service type is set to object-store.

Possible values:

Related Options:

swift_store_ssl_compression = True

boolean value

SSL layer compression for HTTPS Swift requests.

Provide a boolean value to determine whether or not to compress HTTPS Swift requests for images at the SSL layer. By default, compression is enabled.

When using Swift as the backend store for Glance image storage, SSL layer compression of HTTPS Swift requests can be set using this option. If set to False, SSL layer compression of HTTPS Swift requests is disabled. Disabling this option may improve performance for images which are already in a compressed format, for example, qcow2.

Possible values:

Related Options:

swift_store_use_trusts = True

boolean value

Use trusts for multi-tenant Swift store.

This option instructs the Swift store to create a trust for each add/get request when the multi-tenant store is in use. Using trusts allows the Swift store to avoid problems that can be caused by an authentication token expiring during the upload or download of data.

By default, swift_store_use_trusts is set to True(use of trusts is enabled). If set to False, a user token is used for the Swift connection instead, eliminating the overhead of trust creation.

Possible values:

Related options:

swift_store_user = None

string value

The user to authenticate against the Swift authentication service.

swift_upload_buffer_dir = None

string value

Directory to buffer image segments before upload to Swift.

Provide a string value representing the absolute path to the directory on the glance node where image segments will be buffered briefly before they are uploaded to swift.

NOTES: * This is required only when the configuration option swift_buffer_on_upload is set to True. * This directory should be provisioned keeping in mind the swift_store_large_object_chunk_size and the maximum number of images that could be uploaded simultaneously by a given glance node.

Possible values:

Related options:

vmware_api_retry_count = 10

integer value

The number of VMware API retries.

This configuration option specifies the number of times the VMware ESX/VC server API must be retried upon connection related issues or server API call overload. It is not possible to specify retry forever.

Possible Values:

Related options:

vmware_ca_file = None

string value

Absolute path to the CA bundle file.

This configuration option enables the operator to use a custom Cerificate Authority File to verify the ESX/vCenter certificate.

If this option is set, the "vmware_insecure" option will be ignored and the CA file specified will be used to authenticate the ESX/vCenter server certificate and establish a secure connection to the server.

Possible Values:

Related options:

vmware_datastores = None

multi valued

The datastores where the image can be stored.

This configuration option specifies the datastores where the image can be stored in the VMWare store backend. This option may be specified multiple times for specifying multiple datastores. The datastore name should be specified after its datacenter path, separated by ":". An optional weight may be given after the datastore name, separated again by ":" to specify the priority. Thus, the required format becomes <datacenter_path>:<datastore_name>:<optional_weight>.

When adding an image, the datastore with highest weight will be selected, unless there is not enough free space available in cases where the image size is already known. If no weight is given, it is assumed to be zero and the directory will be considered for selection last. If multiple datastores have the same weight, then the one with the most free space available is selected.

Possible Values:

Related options: * None

vmware_insecure = False

boolean value

Set verification of the ESX/vCenter server certificate.

This configuration option takes a boolean value to determine whether or not to verify the ESX/vCenter server certificate. If this option is set to True, the ESX/vCenter server certificate is not verified. If this option is set to False, then the default CA truststore is used for verification.

This option is ignored if the "vmware_ca_file" option is set. In that case, the ESX/vCenter server certificate will then be verified using the file specified using the "vmware_ca_file" option .

Possible Values:

Related options:

vmware_server_host = None

host address value

Address of the ESX/ESXi or vCenter Server target system.

This configuration option sets the address of the ESX/ESXi or vCenter Server target system. This option is required when using the VMware storage backend. The address can contain an IP address (127.0.0.1) or a DNS name (www.my-domain.com).

Possible Values:

Related options:

vmware_server_password = None

string value

Server password.

This configuration option takes the password for authenticating with the VMware ESX/ESXi or vCenter Server. This option is required when using the VMware storage backend.

Possible Values:

Related options:

vmware_server_username = None

string value

Server username.

This configuration option takes the username for authenticating with the VMware ESX/ESXi or vCenter Server. This option is required when using the VMware storage backend.

Possible Values:

Related options:

vmware_store_image_dir = /openstack_glance

string value

The directory where the glance images will be stored in the datastore.

This configuration option specifies the path to the directory where the glance images will be stored in the VMware datastore. If this option is not set, the default directory where the glance images are stored is openstack_glance.

Possible Values:

Related options:

vmware_task_poll_interval = 5

integer value

Interval in seconds used for polling remote tasks invoked on VMware ESX/VC server.

This configuration option takes in the sleep time in seconds for polling an on-going async task as part of the VMWare ESX/VC server API call.

Possible Values:

Related options:

cinder_api_insecure = False

boolean value

Allow to perform insecure SSL requests to cinder.

If this option is set to True, HTTPS endpoint connection is verified using the CA certificates file specified by cinder_ca_certificates_file option.

Possible values:

Related options:

cinder_ca_certificates_file = None

string value

Location of a CA certificates file used for cinder client requests.

The specified CA certificates file, if set, is used to verify cinder connections via HTTPS endpoint. If the endpoint is HTTP, this value is ignored. cinder_api_insecure must be set to True to enable the verification.

Possible values:

Related options:

cinder_catalog_info = volumev2::publicURL

string value

Information to match when looking for cinder in the service catalog.

When the cinder_endpoint_template is not set and any of cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, cinder_store_password is not set, cinder store uses this information to lookup cinder endpoint from the service catalog in the current context. cinder_os_region_name, if set, is taken into consideration to fetch the appropriate endpoint.

The service catalog can be listed by the openstack catalog list command.

Possible values:

Related options:

cinder_endpoint_template = None

string value

Override service catalog lookup with template for cinder endpoint.

When this option is set, this value is used to generate cinder endpoint, instead of looking up from the service catalog. This value is ignored if cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, and cinder_store_password are specified.

If this configuration option is set, cinder_catalog_info will be ignored.

Possible values:

Related options:

cinder_enforce_multipath = False

boolean value

If this is set to True, attachment of volumes for image transfer will be aborted when multipathd is not running. Otherwise, it will fallback to single path.

Possible values:

Related options:

cinder_http_retries = 3

integer value

Number of cinderclient retries on failed http calls.

When a call failed by any errors, cinderclient will retry the call up to the specified times after sleeping a few seconds.

Possible values:

Related options:

cinder_mount_point_base = /var/lib/glance/mnt

string value

Directory where the NFS volume is mounted on the glance node.

Possible values:

cinder_os_region_name = None

string value

Region name to lookup cinder service from the service catalog.

This is used only when cinder_catalog_info is used for determining the endpoint. If set, the lookup for cinder endpoint by this node is filtered to the specified region. It is useful when multiple regions are listed in the catalog. If this is not set, the endpoint is looked up from every region.

Possible values:

Related options:

cinder_state_transition_timeout = 300

integer value

Time period, in seconds, to wait for a cinder volume transition to complete.

When the cinder volume is created, deleted, or attached to the glance node to read/write the volume data, the volume’s state is changed. For example, the newly created volume status changes from creating to available after the creation process is completed. This specifies the maximum time to wait for the status change. If a timeout occurs while waiting, or the status is changed to an unexpected value (e.g. error), the image creation fails.

Possible values:

Related options:

cinder_store_auth_address = None

string value

The address where the cinder authentication service is listening.

When all of cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, and cinder_store_password options are specified, the specified values are always used for the authentication. This is useful to hide the image volumes from users by storing them in a project/tenant specific to the image service. It also enables users to share the image volume among other projects under the control of glance’s ACL.

If either of these options are not set, the cinder endpoint is looked up from the service catalog, and current context’s user and project are used.

Possible values:

Related options:

cinder_store_password = None

string value

Password for the user authenticating against cinder.

This must be used with all the following related options. If any of these are not specified, the user of the current context is used.

Possible values:

Related options:

cinder_store_project_name = None

string value

Project name where the image volume is stored in cinder.

If this configuration option is not set, the project in current context is used.

This must be used with all the following related options. If any of these are not specified, the project of the current context is used.

Possible values:

Related options:

cinder_store_user_name = None

string value

User name to authenticate against cinder.

This must be used with all the following related options. If any of these are not specified, the user of the current context is used.

Possible values:

Related options:

cinder_use_multipath = False

boolean value

Flag to identify multipath is supported or not in the deployment.

Set it to False if multipath is not supported.

Possible values:

Related options:

cinder_volume_type = None

string value

Volume type that will be used for volume creation in cinder.

Some cinder backends can have several volume types to optimize storage usage. Adding this option allows an operator to choose a specific volume type in cinder that can be optimized for images.

If this is not set, then the default volume type specified in the cinder configuration will be used for volume creation.

Possible values:

Related options:

default_backend = None

string value

The store identifier for the default backend in which data will be stored.

The value must be defined as one of the keys in the dict defined by the enabled_backends configuration option in the DEFAULT configuration group.

If a value is not defined for this option:

Related Options:

default_store = file

string value

The default scheme to use for storing images.

Provide a string value representing the default scheme to use for storing images. If not set, Glance uses file as the default scheme to store images with the file store.

Possible values:

Related Options:

Deprecated since: Rocky

Reason: This option is deprecated against new config option ``default_backend`` which acts similar to ``default_store`` config option.

This option is scheduled for removal in the U development cycle.

default_swift_reference = ref1

string value

Reference to default Swift account/backing store parameters.

Provide a string value representing a reference to the default set of parameters required for using swift account/backing store for image storage. The default reference value for this configuration option is ref1. This configuration option dereferences the parameters and facilitates image storage in Swift storage backend every time a new image is added.

Possible values:

Related options:

filesystem_store_chunk_size = 65536

integer value

Chunk size, in bytes.

The chunk size used when reading or writing image files. Raising this value may improve the throughput but it may also slightly increase the memory usage when handling a large number of requests.

Possible Values:

Related options:

filesystem_store_datadir = /var/lib/glance/images

string value

Directory to which the filesystem backend store writes images.

Upon start up, Glance creates the directory if it doesn’t already exist and verifies write access to the user under which glance-api runs. If the write access isn’t available, a BadStoreConfiguration exception is raised and the filesystem store may not be available for adding new images.

Possible values:

Related options:

filesystem_store_datadirs = None

multi valued

List of directories and their priorities to which the filesystem backend store writes images.

The filesystem store can be configured to store images in multiple directories as opposed to using a single directory specified by the filesystem_store_datadir configuration option. When using multiple directories, each directory can be given an optional priority to specify the preference order in which they should be used. Priority is an integer that is concatenated to the directory path with a colon where a higher value indicates higher priority. When two directories have the same priority, the directory with most free space is used. When no priority is specified, it defaults to zero.

More information on configuring filesystem store with multiple store directories can be found at https://docs.openstack.org/glance/latest/configuration/configuring.html

Possible values:

Related options:

filesystem_store_file_perm = 0

integer value

File access permissions for the image files.

Set the intended file access permissions for image data. This provides a way to enable other services, e.g. Nova, to consume images directly from the filesystem store. The users running the services that are intended to be given access to could be made a member of the group that owns the files created. Assigning a value less then or equal to zero for this configuration option signifies that no changes be made to the default permissions. This value will be decoded as an octal digit.

For more information, please refer the documentation at https://docs.openstack.org/glance/latest/configuration/configuring.html

Possible values:

Related options:

filesystem_store_metadata_file = None

string value

Filesystem store metadata file.

The path to a file which contains the metadata to be returned with any location associated with the filesystem store. The file must contain a valid JSON object. The object should contain the keys id and mountpoint. The value for both keys should be a string.

Possible values:

Related options:

filesystem_thin_provisioning = False

boolean value

Enable or not thin provisioning in this backend.

This configuration option enable the feature of not really write null byte sequences on the filesystem, the holes who can appear will automatically be interpreted by the filesystem as null bytes, and do not really consume your storage. Enabling this feature will also speed up image upload and save network traffic in addition to save space in the backend, as null bytes sequences are not sent over the network.

Possible Values:

Related options:

http_proxy_information = {}

dict value

The http/https proxy information to be used to connect to the remote server.

This configuration option specifies the http/https proxy information that should be used to connect to the remote server. The proxy information should be a key value pair of the scheme and proxy, for example, http:10.0.0.1:3128. You can also specify proxies for multiple schemes by separating the key value pairs with a comma, for example, http:10.0.0.1:3128, https:10.0.0.1:1080.

Possible values:

Related options:

https_ca_certificates_file = None

string value

Path to the CA bundle file.

This configuration option enables the operator to use a custom Certificate Authority file to verify the remote server certificate. If this option is set, the https_insecure option will be ignored and the CA file specified will be used to authenticate the server certificate and establish a secure connection to the server.

Possible values:

Related options:

https_insecure = True

boolean value

Set verification of the remote server certificate.

This configuration option takes in a boolean value to determine whether or not to verify the remote server certificate. If set to True, the remote server certificate is not verified. If the option is set to False, then the default CA truststore is used for verification.

This option is ignored if https_ca_certificates_file is set. The remote server certificate will then be verified using the file specified using the https_ca_certificates_file option.

Possible values:

Related options:

rados_connect_timeout = 0

integer value

Timeout value for connecting to Ceph cluster.

This configuration option takes in the timeout value in seconds used when connecting to the Ceph cluster i.e. it sets the time to wait for glance-api before closing the connection. This prevents glance-api hangups during the connection to RBD. If the value for this option is set to less than or equal to 0, no timeout is set and the default librados value is used.

Possible Values:

Related options:

`rbd_store_ceph_conf = `

string value

Ceph configuration file path.

This configuration option specifies the path to the Ceph configuration file to be used. If the value for this option is not set by the user or is set to the empty string, librados will read the standard ceph.conf file by searching the default Ceph configuration file locations in sequential order. See the Ceph documentation for details.

NOTE 2: If you leave this option empty (the default), the actual Ceph configuration file used may change depending on what version of librados is being used. If it is important for you to know exactly which configuration file is in effect, you may specify that file here using this option.

Possible Values:

Related options:

rbd_store_chunk_size = 8

integer value

Size, in megabytes, to chunk RADOS images into.

Provide an integer value representing the size in megabytes to chunk Glance images into. The default chunk size is 8 megabytes. For optimal performance, the value should be a power of two.

When Ceph’s RBD object storage system is used as the storage backend for storing Glance images, the images are chunked into objects of the size set using this option. These chunked objects are then stored across the distributed block data store to use for Glance.

Possible Values:

Related options:

rbd_store_pool = images

string value

RADOS pool in which images are stored.

When RBD is used as the storage backend for storing Glance images, the images are stored by means of logical grouping of the objects (chunks of images) into a pool. Each pool is defined with the number of placement groups it can contain. The default pool that is used is images.

More information on the RBD storage backend can be found here: http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/

Possible Values:

Related options:

rbd_store_user = None

string value

RADOS user to authenticate as.

This configuration option takes in the RADOS user to authenticate as. This is only needed when RADOS authentication is enabled and is applicable only if the user is using Cephx authentication. If the value for this option is not set by the user or is set to None, a default value will be chosen, which will be based on the client. section in rbd_store_ceph_conf.

Possible Values:

Related options:

rbd_thin_provisioning = False

boolean value

Enable or not thin provisioning in this backend.

This configuration option enable the feature of not really write null byte sequences on the RBD backend, the holes who can appear will automatically be interpreted by Ceph as null bytes, and do not really consume your storage. Enabling this feature will also speed up image upload and save network traffic in addition to save space in the backend, as null bytes sequences are not sent over the network.

Possible Values:

Related options:

rootwrap_config = /etc/glance/rootwrap.conf

string value

Path to the rootwrap configuration file to use for running commands as root.

The cinder store requires root privileges to operate the image volumes (for connecting to iSCSI/FC volumes and reading/writing the volume data, etc.). The configuration file should allow the required commands by cinder store and os-brick library.

Possible values:

Related options:

sheepdog_store_address = 127.0.0.1

host address value

Address to bind the Sheepdog daemon to.

Provide a string value representing the address to bind the Sheepdog daemon to. The default address set for the sheep is 127.0.0.1.

The Sheepdog daemon, also called sheep, manages the storage in the distributed cluster by writing objects across the storage network. It identifies and acts on the messages directed to the address set using sheepdog_store_address option to store chunks of Glance images.

Possible values:

Related Options:

Deprecated since: Train

Reason: The Sheepdog project is no longer actively maintained. The Sheepdog driver is scheduled for removal in the U development cycle.

sheepdog_store_chunk_size = 64

integer value

Chunk size for images to be stored in Sheepdog data store.

Provide an integer value representing the size in mebibyte (1048576 bytes) to chunk Glance images into. The default chunk size is 64 mebibytes.

When using Sheepdog distributed storage system, the images are chunked into objects of this size and then stored across the distributed data store to use for Glance.

Chunk sizes, if a power of two, help avoid fragmentation and enable improved performance.

Possible values:

Related Options:

Deprecated since: Train

Reason: The Sheepdog project is no longer actively maintained. The Sheepdog driver is scheduled for removal in the U development cycle.

sheepdog_store_port = 7000

port value

Port number on which the sheep daemon will listen.

Provide an integer value representing a valid port number on which you want the Sheepdog daemon to listen on. The default port is 7000.

The Sheepdog daemon, also called sheep, manages the storage in the distributed cluster by writing objects across the storage network. It identifies and acts on the messages it receives on the port number set using sheepdog_store_port option to store chunks of Glance images.

Possible values:

Related Options:

Deprecated since: Train

Reason: The Sheepdog project is no longer actively maintained. The Sheepdog driver is scheduled for removal in the U development cycle.

stores = ['file', 'http']

list value

List of enabled Glance stores.

Register the storage backends to use for storing disk images as a comma separated list. The default stores enabled for storing disk images with Glance are file and http.

Possible values:

Related Options:

Deprecated since: Rocky

Reason: This option is deprecated against new config option ``enabled_backends`` which helps to configure multiple backend stores of different schemes.

This option is scheduled for removal in the U development cycle.

swift_buffer_on_upload = False

boolean value

Buffer image segments before upload to Swift.

Provide a boolean value to indicate whether or not Glance should buffer image data to disk while uploading to swift. This enables Glance to resume uploads on error.

NOTES: When enabling this option, one should take great care as this increases disk usage on the API node. Be aware that depending upon how the file system is configured, the disk space used for buffering may decrease the actual disk space available for the glance image cache. Disk utilization will cap according to the following equation: (swift_store_large_object_chunk_size * workers * 1000)

Possible values:

Related options:

swift_store_admin_tenants = []

list value

List of tenants that will be granted admin access.

This is a list of tenants that will be granted read/write access on all Swift containers created by Glance in multi-tenant mode. The default value is an empty list.

Possible values:

Related options:

swift_store_auth_address = None

string value

The address where the Swift authentication service is listening.

swift_store_auth_insecure = False

boolean value

Set verification of the server certificate.

This boolean determines whether or not to verify the server certificate. If this option is set to True, swiftclient won’t check for a valid SSL certificate when authenticating. If the option is set to False, then the default CA truststore is used for verification.

Possible values:

Related options:

swift_store_auth_version = 2

string value

Version of the authentication service to use. Valid versions are 2 and 3 for keystone and 1 (deprecated) for swauth and rackspace.

swift_store_cacert = None

string value

Path to the CA bundle file.

This configuration option enables the operator to specify the path to a custom Certificate Authority file for SSL verification when connecting to Swift.

Possible values:

Related options:

swift_store_config_file = None

string value

Absolute path to the file containing the swift account(s) configurations.

Include a string value representing the path to a configuration file that has references for each of the configured Swift account(s)/backing stores. By default, no file path is specified and customized Swift referencing is disabled. Configuring this option is highly recommended while using Swift storage backend for image storage as it avoids storage of credentials in the database.

Possible values:

Related options:

swift_store_container = glance

string value

Name of single container to store images/name prefix for multiple containers

When a single container is being used to store images, this configuration option indicates the container within the Glance account to be used for storing all images. When multiple containers are used to store images, this will be the name prefix for all containers. Usage of single/multiple containers can be controlled using the configuration option swift_store_multiple_containers_seed.

When using multiple containers, the containers will be named after the value set for this configuration option with the first N chars of the image UUID as the suffix delimited by an underscore (where N is specified by swift_store_multiple_containers_seed).

Example: if the seed is set to 3 and swift_store_container = glance, then an image with UUID fdae39a1-bac5-4238-aba4-69bcc726e848 would be placed in the container glance_fda. All dashes in the UUID are included when creating the container name but do not count toward the character limit, so when N=10 the container name would be glance_fdae39a1-ba.

Possible values:

Related options:

swift_store_create_container_on_put = False

boolean value

Create container, if it doesn’t already exist, when uploading image.

At the time of uploading an image, if the corresponding container doesn’t exist, it will be created provided this configuration option is set to True. By default, it won’t be created. This behavior is applicable for both single and multiple containers mode.

Possible values:

Related options:

swift_store_endpoint = None

string value

The URL endpoint to use for Swift backend storage.

Provide a string value representing the URL endpoint to use for storing Glance images in Swift store. By default, an endpoint is not set and the storage URL returned by auth is used. Setting an endpoint with swift_store_endpoint overrides the storage URL and is used for Glance image storage.

Possible values:

Related Options:

swift_store_endpoint_type = publicURL

string value

Endpoint Type of Swift service.

This string value indicates the endpoint type to use to fetch the Swift endpoint. The endpoint type determines the actions the user will be allowed to perform, for instance, reading and writing to the Store. This setting is only used if swift_store_auth_version is greater than 1.

Possible values:

Related options:

swift_store_expire_soon_interval = 60

integer value

Time in seconds defining the size of the window in which a new token may be requested before the current token is due to expire.

Typically, the Swift storage driver fetches a new token upon the expiration of the current token to ensure continued access to Swift. However, some Swift transactions (like uploading image segments) may not recover well if the token expires on the fly.

Hence, by fetching a new token before the current token expiration, we make sure that the token does not expire or is close to expiry before a transaction is attempted. By default, the Swift storage driver requests for a new token 60 seconds or less before the current token expiration.

Possible values:

Related Options:

swift_store_key = None

string value

Auth key for the user authenticating against the Swift authentication service.

swift_store_large_object_chunk_size = 200

integer value

The maximum size, in MB, of the segments when image data is segmented.

When image data is segmented to upload images that are larger than the limit enforced by the Swift cluster, image data is broken into segments that are no bigger than the size specified by this configuration option. Refer to swift_store_large_object_size for more detail.

For example: if swift_store_large_object_size is 5GB and swift_store_large_object_chunk_size is 1GB, an image of size 6.2GB will be segmented into 7 segments where the first six segments will be 1GB in size and the seventh segment will be 0.2GB.

Possible values:

Related options:

swift_store_large_object_size = 5120

integer value

The size threshold, in MB, after which Glance will start segmenting image data.

Swift has an upper limit on the size of a single uploaded object. By default, this is 5GB. To upload objects bigger than this limit, objects are segmented into multiple smaller objects that are tied together with a manifest file. For more detail, refer to https://docs.openstack.org/swift/latest/overview_large_objects.html

This configuration option specifies the size threshold over which the Swift driver will start segmenting image data into multiple smaller files. Currently, the Swift driver only supports creating Dynamic Large Objects.

Possible values:

Related options:

swift_store_multi_tenant = False

boolean value

Store images in tenant’s Swift account.

This enables multi-tenant storage mode which causes Glance images to be stored in tenant specific Swift accounts. If this is disabled, Glance stores all images in its own account. More details multi-tenant store can be found at https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage

Possible values:

Related options:

swift_store_multiple_containers_seed = 0

integer value

Seed indicating the number of containers to use for storing images.

When using a single-tenant store, images can be stored in one or more than one containers. When set to 0, all images will be stored in one single container. When set to an integer value between 1 and 32, multiple containers will be used to store images. This configuration option will determine how many containers are created. The total number of containers that will be used is equal to 16^N, so if this config option is set to 2, then 16^2=256 containers will be used to store images.

Please refer to swift_store_container for more detail on the naming convention. More detail about using multiple containers can be found at https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-multiple-containers.html

Possible values:

Related options:

swift_store_region = None

string value

The region of Swift endpoint to use by Glance.

Provide a string value representing a Swift region where Glance can connect to for image storage. By default, there is no region set.

When Glance uses Swift as the storage backend to store images for a specific tenant that has multiple endpoints, setting of a Swift region with swift_store_region allows Glance to connect to Swift in the specified region as opposed to a single region connectivity.

This option can be configured for both single-tenant and multi-tenant storage.

Possible values:

Related Options:

swift_store_retry_get_count = 0

integer value

The number of times a Swift download will be retried before the request fails.

Provide an integer value representing the number of times an image download must be retried before erroring out. The default value is zero (no retry on a failed image download). When set to a positive integer value, swift_store_retry_get_count ensures that the download is attempted this many more times upon a download failure before sending an error message.

Possible values:

Related Options:

swift_store_service_type = object-store

string value

Type of Swift service to use.

Provide a string value representing the service type to use for storing images while using Swift backend storage. The default service type is set to object-store.

Possible values:

Related Options:

swift_store_ssl_compression = True

boolean value

SSL layer compression for HTTPS Swift requests.

Provide a boolean value to determine whether or not to compress HTTPS Swift requests for images at the SSL layer. By default, compression is enabled.

When using Swift as the backend store for Glance image storage, SSL layer compression of HTTPS Swift requests can be set using this option. If set to False, SSL layer compression of HTTPS Swift requests is disabled. Disabling this option may improve performance for images which are already in a compressed format, for example, qcow2.

Possible values:

Related Options:

swift_store_use_trusts = True

boolean value

Use trusts for multi-tenant Swift store.

This option instructs the Swift store to create a trust for each add/get request when the multi-tenant store is in use. Using trusts allows the Swift store to avoid problems that can be caused by an authentication token expiring during the upload or download of data.

By default, swift_store_use_trusts is set to True(use of trusts is enabled). If set to False, a user token is used for the Swift connection instead, eliminating the overhead of trust creation.

Possible values:

Related options:

swift_store_user = None

string value

The user to authenticate against the Swift authentication service.

swift_upload_buffer_dir = None

string value

Directory to buffer image segments before upload to Swift.

Provide a string value representing the absolute path to the directory on the glance node where image segments will be buffered briefly before they are uploaded to swift.

NOTES: * This is required only when the configuration option swift_buffer_on_upload is set to True. * This directory should be provisioned keeping in mind the swift_store_large_object_chunk_size and the maximum number of images that could be uploaded simultaneously by a given glance node.

Possible values:

Related options:

vmware_api_retry_count = 10

integer value

The number of VMware API retries.

This configuration option specifies the number of times the VMware ESX/VC server API must be retried upon connection related issues or server API call overload. It is not possible to specify retry forever.

Possible Values:

Related options:

vmware_ca_file = None

string value

Absolute path to the CA bundle file.

This configuration option enables the operator to use a custom Cerificate Authority File to verify the ESX/vCenter certificate.

If this option is set, the "vmware_insecure" option will be ignored and the CA file specified will be used to authenticate the ESX/vCenter server certificate and establish a secure connection to the server.

Possible Values:

Related options:

vmware_datastores = None

multi valued

The datastores where the image can be stored.

This configuration option specifies the datastores where the image can be stored in the VMWare store backend. This option may be specified multiple times for specifying multiple datastores. The datastore name should be specified after its datacenter path, separated by ":". An optional weight may be given after the datastore name, separated again by ":" to specify the priority. Thus, the required format becomes <datacenter_path>:<datastore_name>:<optional_weight>.

When adding an image, the datastore with highest weight will be selected, unless there is not enough free space available in cases where the image size is already known. If no weight is given, it is assumed to be zero and the directory will be considered for selection last. If multiple datastores have the same weight, then the one with the most free space available is selected.

Possible Values:

Related options: * None

vmware_insecure = False

boolean value

Set verification of the ESX/vCenter server certificate.

This configuration option takes a boolean value to determine whether or not to verify the ESX/vCenter server certificate. If this option is set to True, the ESX/vCenter server certificate is not verified. If this option is set to False, then the default CA truststore is used for verification.

This option is ignored if the "vmware_ca_file" option is set. In that case, the ESX/vCenter server certificate will then be verified using the file specified using the "vmware_ca_file" option .

Possible Values:

Related options:

vmware_server_host = None

host address value

Address of the ESX/ESXi or vCenter Server target system.

This configuration option sets the address of the ESX/ESXi or vCenter Server target system. This option is required when using the VMware storage backend. The address can contain an IP address (127.0.0.1) or a DNS name (www.my-domain.com).

Possible Values:

Related options:

vmware_server_password = None

string value

Server password.

This configuration option takes the password for authenticating with the VMware ESX/ESXi or vCenter Server. This option is required when using the VMware storage backend.

Possible Values:

Related options:

vmware_server_username = None

string value

Server username.

This configuration option takes the username for authenticating with the VMware ESX/ESXi or vCenter Server. This option is required when using the VMware storage backend.

Possible Values:

Related options:

vmware_store_image_dir = /openstack_glance

string value

The directory where the glance images will be stored in the datastore.

This configuration option specifies the path to the directory where the glance images will be stored in the VMware datastore. If this option is not set, the default directory where the glance images are stored is openstack_glance.

Possible Values:

Related options:

vmware_task_poll_interval = 5

integer value

Interval in seconds used for polling remote tasks invoked on VMware ESX/VC server.

This configuration option takes in the sleep time in seconds for polling an on-going async task as part of the VMWare ESX/VC server API call.

Possible Values:

Related options:

container_formats = ['ami', 'ari', 'aki', 'bare', 'ovf', 'ova', 'docker', 'compressed']

list value

Supported values for the container_format image attribute

disk_formats = ['ami', 'ari', 'aki', 'vhd', 'vhdx', 'vmdk', 'raw', 'qcow2', 'vdi', 'iso', 'ploop']

list value

Supported values for the disk_format image attribute

auth_section = None

string value

Config Section from which to load plugin specific options

auth_type = None

string value

Authentication type to load

auth_uri = None

string value

Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release. Deprecated since: Queens

*Reason:*The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version = None

string value

API version of the Identity API endpoint.

cache = None

string value

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

cafile = None

string value

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

certfile = None

string value

Required if identity server requires client certificate

delay_auth_decision = False

boolean value

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

enforce_token_bind = permissive

string value

Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive" (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. "strict" like "permissive" but if the bind type is unknown the token will be rejected. "required" any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

http_connect_timeout = None

integer value

Request timeout value for communicating with Identity API server.

http_request_max_retries = 3

integer value

How many times are we trying to reconnect when communicating with Identity API Server.

include_service_catalog = True

boolean value

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

insecure = False

boolean value

Verify HTTPS connections.

interface = admin

string value

Interface to use for the Identity API endpoint. Valid values are "public", "internal" or "admin"(default).

keyfile = None

string value

Required if identity server requires client certificate

memcache_pool_conn_get_timeout = 10

integer value

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_pool_dead_retry = 300

integer value

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize = 10

integer value

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout = 3

integer value

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout = 60

integer value

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_secret_key = None

string value

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_security_strategy = None

string value

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_use_advanced_pool = False

boolean value

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

memcached_servers = None

list value

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

region_name = None

string value

The region in which the identity server can be found.

service_token_roles = ['service']

list value

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required = False

boolean value

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

service_type = None

string value

The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.

token_cache_time = 300

integer value

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

www_authenticate_uri = None

string value

Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

disable_process_locking = False

boolean value

Enables or disables inter-process locks.

lock_path = None

string value

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.

addressing_mode = dynamic

string value

Indicates the addressing mode used by the driver. Permitted values: legacy - use legacy non-routable addressing routable - use routable addresses dynamic - use legacy addresses if the message bus does not support routing otherwise use routable addressing

anycast_address = anycast

string value

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

broadcast_prefix = broadcast

string value

address prefix used when broadcasting to all servers

connection_retry_backoff = 2

integer value

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval = 1

integer value

Seconds to pause before attempting to re-connect.

connection_retry_interval_max = 30

integer value

Maximum limit for connection_retry_interval + connection_retry_backoff

container_name = None

string value

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

default_notification_exchange = None

string value

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else notify

default_notify_timeout = 30

integer value

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_reply_retry = 0

integer value

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout = 30

integer value

The deadline for an rpc reply message delivery.

default_rpc_exchange = None

string value

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else rpc

default_send_timeout = 30

integer value

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout = 600

integer value

The duration to schedule a purge of idle sender links. Detach link after expiry.

group_request_prefix = unicast

string value

address prefix when sending to any server in group

idle_timeout = 0

integer value

Timeout for inactive connections (in seconds)

link_retry_delay = 10

integer value

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

multicast_address = multicast

string value

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

notify_address_prefix = openstack.org/om/notify

string value

Address prefix for all generated Notification addresses

notify_server_credit = 100

integer value

Window size for incoming Notification messages

pre_settled = ['rpc-cast', 'rpc-reply']

multi valued

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: rpc-call - send RPC Calls pre-settled rpc-reply- send RPC Replies pre-settled rpc-cast - Send RPC Casts pre-settled notify - Send Notifications pre-settled

pseudo_vhost = True

boolean value

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private subnet per virtual host. Set to False if the message bus supports virtual hosting using the hostname field in the AMQP 1.0 Open performative as the name of the virtual host.

reply_link_credit = 200

integer value

Window size for incoming RPC Reply messages.

rpc_address_prefix = openstack.org/om/rpc

string value

Address prefix for all generated RPC addresses

rpc_server_credit = 100

integer value

Window size for incoming RPC Request messages

`sasl_config_dir = `

string value

Path to directory that contains the SASL configuration

`sasl_config_name = `

string value

Name of configuration file (without .conf suffix)

`sasl_default_realm = `

string value

SASL realm to use if no realm present in username

`sasl_mechanisms = `

string value

Space separated list of acceptable SASL mechanisms

server_request_prefix = exclusive

string value

address prefix used when sending to a specific server

ssl = False

boolean value

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

`ssl_ca_file = `

string value

CA certificate PEM file used to verify the server’s certificate

`ssl_cert_file = `

string value

Self-identifying certificate PEM file for client authentication

`ssl_key_file = `

string value

Private key PEM file used to sign ssl_cert_file certificate (optional)

ssl_key_password = None

string value

Password for decrypting ssl_key_file (if encrypted)

ssl_verify_vhost = False

boolean value

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

trace = False

boolean value

Debug: dump AMQP frames to stdout

unicast_address = unicast

string value

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

compression_codec = none

string value

The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version

conn_pool_min_size = 2

integer value

The pool size limit for connections expiration policy

conn_pool_ttl = 1200

integer value

The time-to-live in sec of idle connections in the pool

consumer_group = oslo_messaging_consumer

string value

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

enable_auto_commit = False

boolean value

Enable asynchronous consumer commits

kafka_consumer_timeout = 1.0

floating point value

Default timeout(s) for Kafka consumers

kafka_max_fetch_bytes = 1048576

integer value

Max fetch bytes of Kafka consumer

max_poll_records = 500

integer value

The maximum number of records returned in a poll call

pool_size = 10

integer value

Pool Size for Kafka Consumers

producer_batch_size = 16384

integer value

Size of batch for the producer async send

producer_batch_timeout = 0.0

floating point value

Upper bound on the delay for KafkaProducer batching in seconds

sasl_mechanism = PLAIN

string value

Mechanism when security protocol is SASL

security_protocol = PLAINTEXT

string value

Protocol used to communicate with brokers

`ssl_cafile = `

string value

CA certificate PEM file used to verify the server certificate

driver = []

multi valued

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

retry = -1

integer value

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

topics = ['notifications']

list value

AMQP topic used for OpenStack notifications.

transport_url = None

string value

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

amqp_auto_delete = False

boolean value

Auto-delete queues in AMQP.

amqp_durable_queues = False

boolean value

Use durable queues in AMQP.

direct_mandatory_flag = True

boolean value

(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore

enable_cancel_on_failover = False

boolean value

Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down

heartbeat_in_pthread = False

boolean value

EXPERIMENTAL: Run the health check heartbeat threadthrough a native python thread. By default if thisoption isn’t provided the health check heartbeat willinherit the execution model from the parent process. Byexample if the parent process have monkey patched thestdlib by using eventlet/greenlet then the heartbeatwill be run through a green thread.

heartbeat_rate = 2

integer value

How often times during the heartbeat_timeout_threshold we check the heartbeat.

heartbeat_timeout_threshold = 60

integer value

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).

kombu_compression = None

string value

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_failover_strategy = round-robin

string value

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

kombu_missing_consumer_retry_timeout = 60

integer value

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

kombu_reconnect_delay = 1.0

floating point value

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

rabbit_ha_queues = False

boolean value

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA ^(?!amq\.).* {"ha-mode": "all"} "

rabbit_interval_max = 30

integer value

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_login_method = AMQPLAIN

string value

The RabbitMQ login method.

rabbit_qos_prefetch_count = 0

integer value

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

rabbit_retry_backoff = 2

integer value

How long to backoff for between retries when connecting to RabbitMQ.

rabbit_retry_interval = 1

integer value

How frequently to retry connecting with RabbitMQ.

rabbit_transient_queues_ttl = 1800

integer value

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

ssl = False

boolean value

Connect over SSL.

`ssl_ca_file = `

string value

SSL certification authority file (valid only if SSL enabled).

`ssl_cert_file = `

string value

SSL cert file (valid only if SSL enabled).

`ssl_key_file = `

string value

SSL key file (valid only if SSL enabled).

`ssl_version = `

string value

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

enable_proxy_headers_parsing = False

boolean value

Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.

enforce_scope = False

boolean value

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

policy_default_rule = default

string value

Default rule. Enforced when a requested rule is not found.

policy_dirs = ['policy.d']

multi valued

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

policy_file = policy.json

string value

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

remote_content_type = application/x-www-form-urlencoded

string value

Content Type to send and receive data for REST based policy check

remote_ssl_ca_crt_file = None

string value

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file = None

string value

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file = None

string value

Absolute path client key file REST based policy check

remote_ssl_verify_server_crt = False

boolean value

server identity verification for REST based policy check

config_file = None

string value

Name of the paste configuration file.

Provide a string value representing the name of the paste configuration file to use for configuring pipelines for server application deployments.

NOTES:

If no value is specified for this option, the paste.ini file with the prefix of the corresponding Glance service’s configuration file name will be searched for in the known configuration directories. (For example, if this option is missing from or has no value set in glance-api.conf, the service will look for a file named glance-api-paste.ini.) If the paste configuration file is not found, the service will not start.

Possible values:

Related Options:

flavor = None

string value

Deployment flavor to use in the server application pipeline.

Provide a string value representing the appropriate deployment flavor used in the server application pipeline. This is typically the partial name of a pipeline in the paste configuration file with the service name removed.

For example, if your paste section name in the paste configuration file is [pipeline:glance-api-keystone], set flavor to keystone.

Possible values:

Related Options:

connection_string = messaging://

string value

Connection string for a notifier backend.

Default value is messaging:// which sets the notifier to oslo_messaging.

Examples of possible values:

enabled = False

boolean value

Enable the profiling for all services on this node.

Default value is False (fully disable the profiling feature).

Possible values:

es_doc_type = notification

string value

Document type for notification indexing in elasticsearch.

es_scroll_size = 10000

integer value

Elasticsearch splits large requests in batches. This parameter defines maximum size of each batch (for example: es_scroll_size=10000).

es_scroll_time = 2m

string value

This parameter is a time value parameter (for example: es_scroll_time=2m), indicating for how long the nodes that participate in the search will maintain relevant resources in order to continue and support it.

filter_error_trace = False

boolean value

Enable filter traces that contain error/exception to a separated place.

Default value is set to False.

Possible values:

hmac_keys = SECRET_KEY

string value

Secret key(s) to use for encrypting context data for performance profiling.

This string value should have the following format: <key1>[,<key2>,…​<keyn>], where each key is some random string. A user who triggers the profiling via the REST API has to set one of these keys in the headers of the REST API call to include profiling results of this node for this particular project.

Both "enabled" flag and "hmac_keys" config options should be set to enable profiling. Also, to generate correct profiling information across all services at least one key needs to be consistent between OpenStack projects. This ensures it can be used from client side to generate the trace, containing information from all possible resources.

sentinel_service_name = mymaster

string value

Redissentinel uses a service name to identify a master redis service. This parameter defines the name (for example: sentinal_service_name=mymaster).

socket_timeout = 0.1

floating point value

Redissentinel provides a timeout option on the connections. This parameter defines that timeout (for example: socket_timeout=0.1).

trace_sqlalchemy = False

boolean value

Enable SQL requests profiling in services.

Default value is False (SQL requests won’t be traced).

Possible values:

store_type_preference = []

list value

Preference order of storage backends.

Provide a comma separated list of store names in the order in which images should be retrieved from storage backends. These store names must be registered with the stores configuration option.

Possible values:

Related options:

task_executor = taskflow

string value

Task executor to be used to run task scripts.

Provide a string value representing the executor to use for task executions. By default, TaskFlow executor is used.

TaskFlow helps make task executions easy, consistent, scalable and reliable. It also enables creation of lightweight task objects and/or functions that are combined together into flows in a declarative manner.

Possible values:

Related Options:

task_time_to_live = 48

integer value

Time in hours for which a task lives after, either succeeding or failing

work_dir = None

string value

Absolute path to the work directory to use for asynchronous task operations.

The directory set here will be used to operate over images - normally before they are imported in the destination store.

A rough estimation can be done by multiplying the number of max_workers with an average image size (e.g 500MB). The image size estimation should be done based on the average size in your deployment. Note that depending on the tasks running you may need to multiply this number by some factor depending on what the task does. For example, you may want to double the available size if image conversion is enabled. All this being said, remember these are just estimations and you should do them based on the worst case scenario and be prepared to act in case they were wrong.

Possible values:

Related Options:

conversion_format = None

string value

Set the desired image conversion format.

Provide a valid image format to which you want images to be converted before they are stored for consumption by Glance. Appropriate image format conversions are desirable for specific storage backends in order to facilitate efficient handling of bandwidth and usage of the storage infrastructure.

By default, conversion_format is not set and must be set explicitly in the configuration file.

The allowed values for this option are raw, qcow2 and vmdk. The raw format is the unstructured disk format and should be chosen when RBD or Ceph storage backends are used for image storage. qcow2 is supported by the QEMU emulator that expands dynamically and supports Copy on Write. The vmdk is another common disk format supported by many common virtual machine monitors like VMWare Workstation.

Possible values:

Related options:

engine_mode = parallel

string value

Set the taskflow engine mode.

Provide a string type value to set the mode in which the taskflow engine would schedule tasks to the workers on the hosts. Based on this mode, the engine executes tasks either in single or multiple threads. The possible values for this configuration option are: serial and parallel. When set to serial, the engine runs all the tasks in a single thread which results in serial execution of tasks. Setting this to parallel makes the engine run tasks in multiple threads. This results in parallel execution of tasks.

Possible values:

Related options:

max_workers = 10

integer value

Set the number of engine executable tasks.

Provide an integer value to limit the number of workers that can be instantiated on the hosts. In other words, this number defines the number of parallel tasks that can be executed at the same time by the taskflow engine. This value can be greater than one when the engine mode is set to parallel.

Possible values:

Related options:

allow_additional_image_properties = True

boolean value

Allow users to add additional/custom properties to images.

Glance defines a standard set of properties (in its schema) that appear on every image. These properties are also known as base properties. In addition to these properties, Glance allows users to add custom properties to images. These are known as additional properties.

By default, this configuration option is set to True and users are allowed to add additional properties. The number of additional properties that can be added to an image can be controlled via image_property_quota configuration option.

Possible values:

Related options:

api_limit_max = 1000

integer value

Maximum number of results that could be returned by a request.

As described in the help text of limit_param_default, some requests may return multiple results. The number of results to be returned are governed either by the limit parameter in the request or the limit_param_default configuration option. The value in either case, can’t be greater than the absolute maximum defined by this configuration option. Anything greater than this value is trimmed down to the maximum value defined here.

Possible values:

Related options:

daemon = False

boolean value

Run scrubber as a daemon.

This boolean configuration option indicates whether scrubber should run as a long-running process that wakes up at regular intervals to scrub images. The wake up interval can be specified using the configuration option wakeup_time.

If this configuration option is set to False, which is the default value, scrubber runs once to scrub images and exits. In this case, if the operator wishes to implement continuous scrubbing of images, scrubber needs to be scheduled as a cron job.

Possible values:

Related options:

data_api = glance.db.sqlalchemy.api

string value

Python module path of data access API.

Specifies the path to the API to use for accessing the data model. This option determines how the image catalog data will be accessed.

Possible values:

If this option is set to glance.db.sqlalchemy.api then the image catalog data is stored in and read from the database via the SQLAlchemy Core and ORM APIs.

Setting this option to glance.db.registry.api will force all database access requests to be routed through the Registry service. This avoids data access from the Glance API nodes for an added layer of security, scalability and manageability.

Finally, when this configuration option is set to glance.db.simple.api, image catalog data is stored in and read from an in-memory data structure. This is primarily used for testing.

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

debug = False

boolean value

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

default_log_levels = ['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

list value

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

delayed_delete = False

boolean value

Turn on/off delayed delete.

Typically when an image is deleted, the glance-api service puts the image into deleted state and deletes its data at the same time. Delayed delete is a feature in Glance that delays the actual deletion of image data until a later point in time (as determined by the configuration option scrub_time). When delayed delete is turned on, the glance-api service puts the image into pending_delete state upon deletion and leaves the image data in the storage backend for the image scrubber to delete at a later time. The image scrubber will move the image into deleted state upon successful deletion of image data.

Possible values:

Related options:

digest_algorithm = sha256

string value

Digest algorithm to use for digital signature.

Provide a string value representing the digest algorithm to use for generating digital signatures. By default, sha256 is used.

To get a list of the available algorithms supported by the version of OpenSSL on your platform, run the command: openssl list-message-digest-algorithms. Examples are sha1, sha256, and sha512.

Possible values:

Relation options:

enable_v1_registry = True

boolean value

DEPRECATED FOR REMOVAL

Deprecated since: Newton

*Reason:*The Images (Glance) version 1 API has been DEPRECATED in the Newton release and will be removed on or after Pike release, following the standard OpenStack deprecation policy. Hence, the configuration options specific to the Images (Glance) v1 API are hereby deprecated and subject to removal. Operators are advised to deploy the Images (Glance) v2 API.

enable_v2_api = True

boolean value

Deploy the v2 OpenStack Images API.

When this option is set to True, Glance service will respond to requests on registered endpoints conforming to the v2 OpenStack Images API.

NOTES:

Possible values:

Related options:

Deprecated since: Newton

*Reason:*The Images (Glance) version 1 API has been DEPRECATED in the Newton release. It will be removed on or after Pike release, following the standard OpenStack deprecation policy. Once we remove the Images (Glance) v1 API, only the Images (Glance) v2 API can be deployed and will be enabled by default making this option redundant.

enable_v2_registry = True

boolean value

Deploy the v2 API Registry service.

When this option is set to True, the Registry service will be enabled in Glance for v2 API requests.

NOTES:

Possible values:

Related options:

Deprecated since: Queens

Reason: Glance registry service is deprecated for removal.

More information can be found from the spec: http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance/deprecate-registry.html

enabled_import_methods = ['glance-direct', 'web-download', 'copy-image']

list value

List of enabled Image Import Methods

'glance-direct', 'copy-image' and 'web-download' are enabled by default.

    Related options:
** [DEFAULT]/node_staging_uri

fatal_deprecations = False

boolean value

Enables or disables fatal status of deprecations.

hashing_algorithm = sha512

string value

Secure hashing algorithm used for computing the os_hash_value property.

This option configures the Glance "multihash", which consists of two image properties: the os_hash_algo and the os_hash_value. The os_hash_algo will be populated by the value of this configuration option, and the os_hash_value will be populated by the hexdigest computed when the algorithm is applied to the uploaded or imported image data.

The value must be a valid secure hash algorithm name recognized by the python hashlib library. You can determine what these are by examining the hashlib.algorithms_available data member of the version of the library being used in your Glance installation. For interoperability purposes, however, we recommend that you use the set of secure hash names supplied by the hashlib.algorithms_guaranteed data member because those algorithms are guaranteed to be supported by the hashlib library on all platforms. Thus, any image consumer using hashlib locally should be able to verify the os_hash_value of the image.

The default value of sha512 is a performant secure hash algorithm.

If this option is misconfigured, any attempts to store image data will fail. For that reason, we recommend using the default value.

Possible values:

Related options:

image_location_quota = 10

integer value

Maximum number of locations allowed on an image.

Any negative value is interpreted as unlimited.

Related options:

image_member_quota = 128

integer value

Maximum number of image members per image.

This limits the maximum of users an image can be shared with. Any negative value is interpreted as unlimited.

Related options:

image_property_quota = 128

integer value

Maximum number of properties allowed on an image.

This enforces an upper limit on the number of additional properties an image can have. Any negative value is interpreted as unlimited.

Related options:

image_size_cap = 1099511627776

integer value

Maximum size of image a user can upload in bytes.

An image upload greater than the size mentioned here would result in an image creation failure. This configuration option defaults to 1099511627776 bytes (1 TiB).

NOTES:

Possible values:

image_tag_quota = 128

integer value

Maximum number of tags allowed on an image.

Any negative value is interpreted as unlimited.

Related options:

`instance_format = [instance: %(uuid)s] `

string value

The format for an instance that is passed with the log message.

`instance_uuid_format = [instance: %(uuid)s] `

string value

The format for an instance UUID that is passed with the log message.

limit_param_default = 25

integer value

The default number of results to return for a request.

Responses to certain API requests, like list images, may return multiple items. The number of results returned can be explicitly controlled by specifying the limit parameter in the API request. However, if a limit parameter is not specified, this configuration value will be used as the default number of results to be returned for any API request.

NOTES:

Possible values:

Related options:

log-config-append = None

string value

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

log-date-format = %Y-%m-%d %H:%M:%S

string value

Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.

log-dir = None

string value

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

log-file = None

string value

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

log_rotate_interval = 1

integer value

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is setto "interval".

log_rotate_interval_type = days

string value

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

log_rotation_type = none

string value

Log rotation type.

logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

string value

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

string value

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

string value

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

string value

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

string value

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

max_logfile_count = 30

integer value

Maximum number of rotated log files.

max_logfile_size_mb = 200

integer value

Log file maximum size in MB. This option is ignored if "log_rotation_type" is not set to "size".

metadata_encryption_key = None

string value

AES key for encrypting store location metadata.

Provide a string value representing the AES cipher to use for encrypting Glance store metadata.

Possible values:

Related options:

node_staging_uri = file:///tmp/staging/

string value

The URL provides location where the temporary data will be stored

This option is for Glance internal use only. Glance will save the image data uploaded by the user to staging endpoint during the image import process.

This option does not change the staging API endpoint by any means.

Possible values:

Related options:

publish_errors = False

boolean value

Enables or disables publication of error events.

pydev_worker_debug_host = None

host address value

Host address of the pydev server.

Provide a string value representing the hostname or IP of the pydev server to use for debugging. The pydev server listens for debug connections on this address, facilitating remote debugging in Glance.

Possible values:

Related options:

pydev_worker_debug_port = 5678

port value

Port number that the pydev server will listen on.

Provide a port number to bind the pydev server to. The pydev process accepts debug connections on this port and facilitates remote debugging in Glance.

Possible values:

Related options:

rate_limit_burst = 0

integer value

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level = CRITICAL

string value

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

rate_limit_interval = 0

integer value

Interval, number of seconds, of log rate limiting.

restore = None

string value

Restore the image status from pending_delete to active.

This option is used by administrator to reset the image’s status from pending_delete to active when the image is deleted by mistake and pending delete feature is enabled in Glance. Please make sure the glance-scrubber daemon is stopped before restoring the image to avoid image data inconsistency.

Possible values:

scrub_pool_size = 1

integer value

The size of thread pool to be used for scrubbing images.

When there are a large number of images to scrub, it is beneficial to scrub images in parallel so that the scrub queue stays in control and the backend storage is reclaimed in a timely fashion. This configuration option denotes the maximum number of images to be scrubbed in parallel. The default value is one, which signifies serial scrubbing. Any value above one indicates parallel scrubbing.

Possible values:

Related options:

scrub_time = 0

integer value

The amount of time, in seconds, to delay image scrubbing.

When delayed delete is turned on, an image is put into pending_delete state upon deletion until the scrubber deletes its image data. Typically, soon after the image is put into pending_delete state, it is available for scrubbing. However, scrubbing can be delayed until a later point using this configuration option. This option denotes the time period an image spends in pending_delete state before it is available for scrubbing.

It is important to realize that this has storage implications. The larger the scrub_time, the longer the time to reclaim backend storage from deleted images.

Possible values:

Related options:

show_image_direct_url = False

boolean value

Show direct image location when returning an image.

This configuration option indicates whether to show the direct image location when returning image details to the user. The direct image location is where the image data is stored in backend storage. This image location is shown under the image property direct_url.

When multiple image locations exist for an image, the best location is displayed based on the location strategy indicated by the configuration option location_strategy.

NOTES:

Possible values:

Related options:

show_multiple_locations = False

boolean value

Show all image locations when returning an image.

This configuration option indicates whether to show all the image locations when returning image details to the user. When multiple image locations exist for an image, the locations are ordered based on the location strategy indicated by the configuration opt location_strategy. The image locations are shown under the image property locations.

NOTES:

Possible values:

Related options:

Deprecated since: Newton

*Reason:*Use of this option, deprecated since Newton, is a security risk and will be removed once we figure out a way to satisfy those use cases that currently require it. An earlier announcement that the same functionality can be achieved with greater granularity by using policies is incorrect. You cannot work around this option via policy configuration at the present time, though that is the direction we believe the fix will take. Please keep an eye on the Glance release notes to stay up to date on progress in addressing this issue.

syslog-log-facility = LOG_USER

string value

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use-journal = False

boolean value

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

use-json = False

boolean value

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use-syslog = False

boolean value

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_eventlog = False

boolean value

Log output to Windows Event Log.

use_stderr = False

boolean value

Log output to standard error. This option is ignored if log_config_append is set.

user_storage_quota = 0

string value

Maximum amount of image storage per tenant.

This enforces an upper limit on the cumulative storage consumed by all images of a tenant across all stores. This is a per-tenant limit.

The default unit for this configuration option is Bytes. However, storage units can be specified using case-sensitive literals B, KB, MB, GB and TB representing Bytes, KiloBytes, MegaBytes, GigaBytes and TeraBytes respectively. Note that there should not be any space between the value and unit. Value 0 signifies no quota enforcement. Negative values are invalid and result in errors.

Possible values:

Related options:

wakeup_time = 300

integer value

Time interval, in seconds, between scrubber runs in daemon mode.

Scrubber can be run either as a cron job or daemon. When run as a daemon, this configuration time specifies the time period between two runs. When the scrubber wakes up, it fetches and scrubs all pending_delete images that are available for scrubbing after taking scrub_time into consideration.

If the wakeup time is set to a large number, there may be a large number of images to be scrubbed for each run. Also, this impacts how quickly the backend storage is reclaimed.

Possible values:

Related options:

watch-log-file = False

boolean value

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

backend = sqlalchemy

string value

The back end to use for the database.

connection = None

string value

The SQLAlchemy connection string to use to connect to the database.

connection_debug = 0

integer value

Verbosity of SQL debugging information: 0=None, 100=Everything.

`connection_parameters = `

string value

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…​

connection_recycle_time = 3600

integer value

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

connection_trace = False

boolean value

Add Python stack traces to SQL as comment strings.

db_inc_retry_interval = True

boolean value

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retries = 20

integer value

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

db_max_retry_interval = 10

integer value

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_retry_interval = 1

integer value

Seconds between retries of a database transaction.

max_overflow = 50

integer value

If set, use this value for max_overflow with SQLAlchemy.

max_pool_size = 5

integer value

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries = 10

integer value

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

mysql_enable_ndb = False

boolean value

If True, transparently enables support for handling MySQL Cluster (NDB).

mysql_sql_mode = TRADITIONAL

string value

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

pool_timeout = None

integer value

If set, use this value for pool_timeout with SQLAlchemy.

retry_interval = 10

integer value

Interval between retries of opening a SQL connection.

slave_connection = None

string value

The SQLAlchemy connection string to use to connect to the slave database.

sqlite_synchronous = True

boolean value

If True, SQLite uses synchronous mode.

use_db_reconnect = False

boolean value

Enable the experimental use of database reconnect on connection lost.

use_tpool = False

boolean value

Enable the experimental use of thread pooling for all DB API calls

cinder_api_insecure = False

boolean value

Allow to perform insecure SSL requests to cinder.

If this option is set to True, HTTPS endpoint connection is verified using the CA certificates file specified by cinder_ca_certificates_file option.

Possible values:

Related options:

cinder_ca_certificates_file = None

string value

Location of a CA certificates file used for cinder client requests.

The specified CA certificates file, if set, is used to verify cinder connections via HTTPS endpoint. If the endpoint is HTTP, this value is ignored. cinder_api_insecure must be set to True to enable the verification.

Possible values:

Related options:

cinder_catalog_info = volumev2::publicURL

string value

Information to match when looking for cinder in the service catalog.

When the cinder_endpoint_template is not set and any of cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, cinder_store_password is not set, cinder store uses this information to lookup cinder endpoint from the service catalog in the current context. cinder_os_region_name, if set, is taken into consideration to fetch the appropriate endpoint.

The service catalog can be listed by the openstack catalog list command.

Possible values:

Related options:

cinder_endpoint_template = None

string value

Override service catalog lookup with template for cinder endpoint.

When this option is set, this value is used to generate cinder endpoint, instead of looking up from the service catalog. This value is ignored if cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, and cinder_store_password are specified.

If this configuration option is set, cinder_catalog_info will be ignored.