Search

Chapter 1. Introduction

download PDF

By default, Red Hat Enterprise Linux instances are registered to and obtain their content from the Customer Portal.

Red Hat Enterprise Linux instances under management with Red Hat Satellite Server 6 are instead registered to Satellite Server, and obtain their content and Product subscriptions from it.

Modern IT infrastructure is a mix of physical and virtual hardware, with virtualization providing a level of flexibility and scalability not easily achieved with physical hardware. Red Hat’s subscription model applies to both physical and virtual servers.

A Red Hat subscription provides:

  • Access to support services
  • Content delivery and hosted repositories
  • Access to knowledgebases, forums, videos, and other resources

The Red Hat subscription model requires that for physical servers, subscriptions must cover the physical attributes of the machine, such as the number of sockets or cores. Subscriptions are always applied in sets of two to cover pairs of sockets or cores, and those subscription pairs must be attached to cover all sockets and cores. Subscriptions for virtual servers can also be purchased and applied according to their virtual CPU attributes, but there is another subscription type that might be more suitable - a Virtual Data Center (VDC) subscription, which is a host-based subscription. A host-based subscription is applied to a hypervisor and entitles the hypervisor to provide subscriptions to its virtual machines. With a host-based subscription, each guest requires one subscription, regardless of its virtual CPU configuration.

1.1. Supported Virtualization Platforms

Supported virtualization platforms to which a Virtual Data Center (VDC) subscription can be applied are:

  • Red Hat Virtualization (RHV)
  • Red Hat OpenStack Platform (RHOSP)
  • Red Hat Enterprise Linux hypervisors
  • VMware vSphere
  • Microsoft Hyper-V

    Note

    The virt-who daemon does not currently support Microsoft System Center 2012 R2 Virtual Machine Manager (SCVMM). There must be a virt-who configuration file for each Microsoft Hyper-V host to which virt-who is to connect.

A VDC subscription applies only to a hypervisor’s guest virtual machines, not the hypervisor itself. For all virtualization platforms which require a Red Hat Enterprise Linux hypervisor, the hypervisor requires its own subscription.

1.2. Choosing a Subscription

Red Hat recommends a subscription that allows virtual machines to inherit subscriptions, since this allows for flexibility when provisioning virtual machines. However the choice is yours, and should be made according to your requirements. If you are unsure which subscription best meets your needs, contact your Red Hat account manager for advice. For more details of the Red Hat subscription model, see Subscription Concepts and Workflows.

The following are example Red Hat subscriptions which provide inheritable subscriptions:

  • Red Hat Enterprise Linux for Virtual Datacenters
  • Red Hat Enterprise Linux with Smart Virtualization and Management

This guide uses a Red Hat Enterprise Linux for Virtual Datacenters (VDC) subscription in all examples. The workflow for all inheritable subscriptions is identical.

Confirming if virt-who is Required

To confirm if the virt-who daemon is required, either use the Red Hat Certificate Tool, or contact Red Hat Support. The command line Red Hat Certificate Tool (rct) reads a Subscription Manifest file and displays details of the manifest in plain text. The Red Hat Certificate Tool is available in subscription-manager-1.17.10 (or later) package, in either Red Hat Enterprise Linux 7.3 or Fedora 24.

Examining a Subscription Manifest with the Red Hat Certificate Tool

  1. Download the Subscription Manifest from the Customer Portal.
  2. Run the command line Red Hat Certificate Tool.

    # rct cat-manifest --no-content manifest_file.zip

    The following extract is from an OpenShift Container Platform, Premium (1-2 Sockets) subscription.

    Subscription:
        Name: OpenShift Container Platform, Premium (1-2 Sockets)
        Quantity: 50
        Created: 2017-09-16T01:47:59.000+0000
        Start Date: 2017-07-04T04:00:00.000+0000
        End Date: 2018-07-04T03:59:59.000+0000
        .
        .
        .
        Virt Limit: unlimited
        Requires Virt-who: True

The virt-who daemon is required if the rct output includes Virt Limit: unlimited, Requires Virt-who: True, or both. In this example, both are included, confirming that the virt-who daemon is required.

1.3. Applying Virtual Guest Subscriptions

A Virtual Data Center (VDC) subscription is one type of host-based subscription offered by Red Hat. Host-based subscriptions are applied to a host and inherited by its guests. Host-based subscriptions consist of two parts, a pool attached to the virtualization manager or hypervisor, and a pool from which virtual guests inherit their subscription. It is important to note that the virtualization manager or hypervisor’s subscription does not provide entitlement to product content.

To successfully provision virtual machines, and ensure they inherit host subscriptions, you must do the following:

  1. Upload a manifest that includes the VDC subscriptions to Satellite Server.

    For more information, see Importing a Subscription Manifest into the Satellite Server in the Content Management Guide.

  2. Install, configure, and start the virt-who service.

    For more information, see Chapter 3, Configuring virt-who.

  3. Attach VDC subscriptions to the hypervisor hosting the virtual guests. For more information, see Section 4.1, “Allocating VDC Subscriptions to Hypervisors”.
  4. Register virtual machines with an activation key that has auto-attach enabled and no subscriptions attached. This way, the virtual machines will inherit the VDC subscription from the hypervisor. For more information, see Section 4.4, “Registering Guest Virtual Machines”.

1.4. Subscription Status

A registered host, virtual or physical, has a subscription status based on its installed Products and attached subscriptions.

To verify the status of a virtual machine’s subscription in the Satellite web UI:

  1. Open the Satellite web UI and navigate to Hosts > Content Hosts.
  2. Click on the host’s name.
  3. Check the content of the Subscription Status column. Each host’s subscription status is indicated by colour: green, yellow or red, and its status in text.

Subscription Status Meanings

Red
The host has Products installed that valid subscriptions do not cover. Hosts in a Red status cannot access content for Products not covered by subscriptions. Manual intervention is required to resolve a subscription with this status.
Yellow
Either the host has insufficient subscriptions or an incorrect quantity of subscriptions is attached (for example, a 2-socket subscription is attached to a 4-socket host), or Satellite does not know which virtualization manager or hypervisor hosts the virtual machine and has assigned a temporary subscription. Insufficient subscriptions must be resolved manually. Temporary subscriptions will be automatically resolved by Satellite, providing there are enough subscriptions available.
Green
The host is correctly subscribed.
Note

Hypervisors always appear in the Satellite web UI as correctly subscribed, regardless of their actual status.

1.4.1. Temporary Subscriptions

When a virtual machine is first registered, Satellite does not know with which virtualization manager or hypervisor the virtual machine is associated and so cannot assign a subscription. In this case a temporary subscription is granted, valid for a maximum period of 7 days. When the virt-who daemon next runs and identifies the virtual machine’s host, a permanent subscription is applied, provided the host has available subscriptions of the right type. If a permanent subscription is granted, the virtual machine’s subscription status is changed to Subscribed. A virtual machine that has been granted a temporary subscription might, when the temporary subscription expires, automatically select a subscription intended for a physical host and so restrict the number of subscriptions available. When the temporary subscription period expires, the host’s status is changed to Not subscribed if it has been unable to request a suitable subscription.

When a virtual machine is granted a temporary subscription, you have several options available:

  • Install virt-who and wait

    If virt-who has not already been installed and configured, do so, then wait for virt-who to identify the virtualization manager or hypervisor hosting the virtual machine, in which case the subscription will be automatically selected from those available.

  • Manually assign a subscription

    If you do not want to wait for the expiry of the temporary subscription, or you want to assign a specific subscription, install and configure virt-who, then manually assign the desired subscription.

  • Do nothing

    This situation should be avoided as it results in more subscriptions being consumed than would otherwise be consumed. A virtual machine assigned a temporary subscription might be assigned subscriptions intended for physical hosts. For example, a virtual machine with 2 CPUs might be granted two subscriptions instead of a single VDC subscription.

1.4.2. Virtual Machine Migration

When a virtual machine is migrated either automatically or manually to another hypervisor that is registered to Red Hat Satellite, one of the following virtual machine subscription behaviors can occur:

  • If the virtual machine has been reported via virt-who, and the hypervisor has a valid VDC subscription, the virtual machine will consume the virtual guest pool that already exists for the hypervisor. Ideally, all hypervisors that could be hosting the virtual machine should have a valid VDC subscription.
  • If the virtual machine has been reported via virt-who, and there are sufficient subscriptions in Red Hat Satellite, but the hypervisor does not yet have a valid VDC subscription attached, a VDC subscription will get automatically attached to the hypervisor and be inherited by the virtual machine.
  • If there are sufficient subscriptions in Red Hat Satellite, but the virtual machine has not been reported via virt-who, the virtual machine will consume a physical subscription.
  • If the hypervisor does not have a valid VDC subscription attached, and there are insufficient subscriptions in Red Hat Satellite, the virtual machine will not have a valid subscription and lose access to content.
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.