Provisioning Guide
A guide to provisioning physical and virtual hosts on Red Hat Satellite Servers.
Abstract
Chapter 1. Introduction
1.1. Provisioning Overview
Provisioning is a process that starts with a bare physical or virtual machine and ends with a fully configured, ready-to-use operating system. Using Red Hat Satellite, you can define and automate fine-grained provisioning for a large number of hosts.
There are many provisioning methods. For example, you can use Satellite Server’s integrated Capsule or an external Capsule Server to provision bare metal hosts using both PXE based and non-PXE based methods. You can also provision cloud instances from specific providers through their APIs. These provisioning methods are part of the Red Hat Satellite application life cycle to create, manage, and update hosts.
Red Hat Satellite has different methods for provisioning hosts:
- Bare Metal Provisioning
- Satellite provisions bare metal hosts primarily through PXE boot and MAC address identification. You can create host entries and specify the MAC address of the physical host to provision. You can also boot blank hosts to use Satellite’s discovery service, which creates a pool of ready-to-provision hosts. You can also boot and provision hosts through PXE-less methods.
- Cloud Providers
- Satellite connects to private and public cloud providers to provision instances of hosts from images that are stored with the Cloud environment. This also includes selecting which hardware profile or flavor to use.
- Virtualization Infrastructure
- Satellite connects to virtualization infrastructure services such as Red Hat Virtualization and VMware to provision virtual machines from virtual image templates or using the same PXE-based boot methods as bare metal providers.
1.2. Network Boot Provisioning Workflow
PXE booting assumes that a host, either physical or virtual, is configured to boot from network as the first booting device, and from the hard drive as the second booting device.
The provisioning process follows a basic PXE workflow:
- You create a host and select a domain and subnet. Satellite requests an available IP address from the DHCP Capsule Server that is associated with the subnet or from the PostgreSQL database in Satellite. Satellite loads this IP address into the IP address field in the Create Host window. When you complete all the options for the new host, submit the new host request.
Depending on the configuration specifications of the host and its domain and subnet, Satellite creates the following settings:
- A DHCP record on the Capsule Server that is associated with the subnet.
- A forward DNS record on the Capsule Server that is associated with the domain.
- A reverse DNS record on the DNS Capsule Server that is associated with the subnet.
- PXELinux, Grub, Grub2, and iPXE configuration files for the host in the TFTP Capsule Server that is associated with the subnet.
- A Puppet certificate on the associated Puppet server.
- A realm on the associated identity server.
- The new host requests a DHCP reservation from the DHCP server.
-
The DHCP server responds to the reservation request and returns TFTP
next-server
andfilename
options. - The host requests the boot loader and menu from the TFTP server according to the PXELoader setting.
- A boot loader is returned over TFTP.
- The boot loader fetches configuration for the host through its provisioning interface MAC address.
- The boot loader fetches the operating system installer kernel, init RAM disk, and boot parameters.
- The installer requests the provisioning template from Satellite.
- Satellite renders the provision template and returns the result to the host.
The installer performs installation of the operating system.
- The installer registers the host to Satellite using Red Hat Subscription Manager.
-
The installer installs management tools such as
katello-agent
andpuppet
. -
The installer notifies Satellite of a successful build in the
postinstall
script.
- The PXE configuration files revert to a local boot template.
- The host reboots.
- The new host requests a DHCP reservation from the DHCP server.
-
The DHCP server responds to the reservation request and returns TFTP
next-server
andfilename
options. - The host requests the bootloader and menu from the TFTP server according to the PXELoader setting.
- A boot loader is returned over TFTP.
- The boot loader fetches the configuration for the host through its provision interface MAC address.
- The boot loader initiates boot from the local drive.
- If you configured the host to use any Puppet classes, the host configures itself using the modules.
This workflow differs depending on custom options. For example:
- Discovery
- If you use the discovery service, Satellite automatically detects the MAC address of the new host and restarts the host after you submit a request. Note that TCP port 8443 must be reachable by the Capsule to which the host is attached for Satellite to restart the host.
- PXE-less Provisioning
- After you submit a new host request, you must boot the specific host with the boot disk that you download from Satellite and transfer using a USB port of the host.
- Compute Resources
-
Satellite creates the virtual machine and retrieves the MAC address and stores the MAC address in Satellite. If you use image-based provisioning, the host does not follow the standard PXE boot and operating system installation. The compute resource creates a copy of the image for the host to use. Depending on image settings in Satellite, seed data can be passed in for initial configuration, for example using
cloud-init
. Satellite can connect using SSH to the host and execute a template to finish the customization.
Chapter 2. Configuring Provisioning Resources
2.1. Provisioning Contexts
A provisioning context is the combination of an organization and location that you specify for Satellite components. The organization and location that a component belongs to sets the ownership and access for that component.
Organizations divide Red Hat Satellite 6 components into logical groups based on ownership, purpose, content, security level, and other divisions. You can create and manage multiple organizations through Red Hat Satellite 6 and assign components to each individual organization. This ensures the Satellite Server provisions hosts within a certain organization and only uses components that are assigned to that organization. For more information about organizations, see Managing Organizations in the Content Management Guide.
Locations function similar to organizations. The difference is that locations are based on physical or geographical setting. Users can nest locations in a hierarchy. For more information about locations, see Managing Locations in the Content Management Guide.
2.2. Setting the Provisioning Context
When you set a provisioning context, you define which organization and location to use for provisioning hosts.
The organization and location menus are located in the menu bar, on the upper left of the Satellite web UI. If you have not selected an organization and location to use, the menu displays: Any Organization and Any Location.
Procedure
- Click Any Organization and select the organization.
- Click Any Location and select the location to use.
Each user can set their default provisioning context in their account settings. Click the user name in the upper right of the Satellite web UI and select My account to edit your user account settings.
For CLI Users
When using the CLI, include either
--organization
or--organization-label
and--location
or--location-id
as an option. For example:# hammer host list --organization "Default_Organization" --location "Default_Location"
This command outputs hosts allocated for the Default_Organization and Default_Location.
2.3. Creating Operating Systems
An operating system is a collection of resources that define how Satellite Server installs a base operating system on a host. Operating system entries combine previously defined resources, such as installation media, partition tables, provisioning templates, and others.
Importing operating systems from Red Hat’s CDN creates new entries on the Hosts > Operating Systems page.
You can also add custom operating systems using the following procedure:
Procedure
- In the Satellite web UI, navigate to Hosts > Operating systems and click New Operating system.
- In the Name field, enter a name to represent the operating system entry.
- In the Major field, enter the number that corresponds to the major version of the operating system.
- In the Minor field, enter the number that corresponds to the minor version of the operating system.
- In the Description field, enter a description of the operating system.
- From the Family list, select the operating system’s family.
- From the Root Password Hash list, select the encoding method for the root password.
- From the Architectures list, select the architectures that the operating system uses.
- Click the Partition table tab and select the possible partition tables that apply to this operating system.
- Optional: if you use non-Red Hat content, click the Installation media tab and select the installation media that apply to this operating system. For more information, see Section 2.8, “Adding Installation Media to Satellite”.
- Click the Templates tab and select a PXELinux template, a Provisioning template, and a Finish template for your operating system to use. You can select other templates, for example an iPXE template, if you plan to use iPXE for provisioning.
- Click Submit to save your provisioning template.
For CLI Users
Create the operating system using the
hammer os create
command:# hammer os create --name "MyOS" \ --description "My_custom_operating_system" \ --major 7 --minor 3 --family "Redhat" --architectures "x86_64" \ --partition-tables "My_Partition" --media "Red_Hat" \ --provisioning-templates "My_Provisioning_Template"
2.4. Updating the Details of Multiple Operating Systems
Use this procedure to update the details of multiple operating systems. This example shows you how to assign each operating system a partition table called Kickstart default
, a configuration template called Kickstart default PXELinux
, and a provisioning template called Kickstart Default
.
Procedure
On Satellite Server, run the following Bash script:
PARTID=$(hammer --csv partition-table list | grep "Kickstart default," | cut -d, -f1) PXEID=$(hammer --csv template list --per-page=1000 | grep "Kickstart default PXELinux" | cut -d, -f1) SATID=$(hammer --csv template list --per-page=1000 | grep "provision" | grep ",Kickstart default" | cut -d, -f1) for i in $(hammer --no-headers --csv os list | awk -F, {'print $1'}) do hammer partition-table add-operatingsystem --id="${PARTID}" --operatingsystem-id="${i}" hammer template add-operatingsystem --id="${PXEID}" --operatingsystem-id="${i}" hammer os set-default-template --id="${i}" --config-template-id=${PXEID} hammer os add-config-template --id="${i}" --config-template-id=${SATID} hammer os set-default-template --id="${i}" --config-template-id=${SATID} done
Display information about the updated operating system to verify that the operating system is updated correctly:
# hammer os info --id 1
2.5. Creating Architectures
An architecture in Satellite represents a logical grouping of hosts and operating systems. Architectures are created by Satellite automatically when hosts check in with Puppet. Basic i386 and x86_64 architectures are already preset in Satellite.
Use this procedure to create an architecture in Satellite.
Supported Architectures
Only Intel x86_64 architecture is supported for provisioning using PXE, Discovery, and boot disk. For more information, see the Red Hat Knowledgebase solution Supported architectures and provisioning scenarios in Satellite 6.
Procedure
- In the Satellite web UI, navigate to Hosts > Architectures and click Create Architecture.
- In the Name field, enter a name for the architecture.
- From the Operating Systems list, select an operating system. If none are available, you can create and assign them under Hosts > Operating Systems.
- Click Submit.
For CLI Users
Enter the
hammer architecture create
command to create an architecture. Specify its name and operating systems that include this architecture:# hammer architecture create --name "Architecture_Name" \ --operatingsystems "os"
2.6. Creating Hardware Models
Use this procedure to create a hardware model in Satellite so that you can specify which hardware model a host uses.
Procedure
- In the Satellite web UI, navigate to Hosts > Hardware Models and click Create Model.
- In the Name field, enter a name for the hardware model.
- Optionally, in the Hardware Model and Vendor Class fields, you can enter corresponding information for your system.
- In the Info field, enter a description of the hardware model.
- Click Submit to save your hardware model.
For CLI Users
Create a hardware model using the
hammer model create
command. The only required parameter is--name
. Optionally, enter the hardware model with the--hardware-model
option, a vendor class with the--vendor-class
option, and a description with the--info
option:# hammer model create --name "model_name" --info "description" \ --hardware-model "hardware_model" --vendor-class "vendor_class"
2.7. Using a Synced Kickstart Repository for a Host’s Operating System
Satellite contains a set of synchronized kickstart repositories that you use to install the provisioned host’s operating system. For more information about adding repositories, see Synchronizing Red Hat Repositories in the Content Management Guide.
Use this procedure to set up a kickstart repository.
Procedure
Add the synchronized kickstart repository that you want to use to the existing Content View, or create a new Content View and add the kickstart repository.
For Red Hat Enterprise Linux 8, ensure that you add both Red Hat Enterprise Linux 8 for x86_64 - AppStream Kickstart x86_64 8 and Red Hat Enterprise Linux 8 for x86_64 - BaseOS Kickstart x86_64 8 repositories.
If you use a disconnected environment, you must import the Kickstart repositories from a Red Hat Enterprise Linux binary DVD. For more information, see Importing Kickstart Repositories in the Content Management Guide.
- Publish a new version of the Content View where the kickstart repository is added and promote it to a required lifecycle environment. For more information, see Managing Content Views in the Content Management Guide.
- When you create a host, in the Operating System tab, for Media Selection, select the Synced Content check box.
To view the kickstart tree, enter the following command:
# hammer medium list --organization "your_organization"
2.8. Adding Installation Media to Satellite
Installation media are sources of packages that Satellite Server uses to install a base operating system on a machine from an external repository. You can use this parameter to install third-party content. Red Hat content is delivered through repository syncing instead.
Installation media must be in the format of an operating system installation tree, and must be accessible to the machine hosting the installer through an HTTP URL. You can view installation media by navigating to Hosts > Installation Media menu.
By default, Satellite includes installation media for some official Linux distributions. Note that some of those installation media are targeted for a specific version of an operating system. For example CentOS mirror (7.x) must be used for CentOS 7 or earlier, and CentOS mirror (8.x) must be used for CentOS 8 or later.
If you want to improve download performance when using installation media to install operating systems on multiple host, you must modify the installation medium’s Path to point to the closest mirror or a local copy.
Procedure
- In the Satellite web UI, navigate to Hosts > Installation Media and click Create Medium.
- In the Name field, enter a name to represent the installation media entry.
In the Path enter the URL or NFS share that contains the installation tree. You can use following variables in the path to represent multiple different system architectures and versions:
-
$arch
- The system architecture. -
$version
- The operating system version. -
$major
- The operating system major version. $minor
- The operating system minor version.Example HTTP path:
http://download.example.com/centos/$version/Server/$arch/os/
Example NFS path:
nfs://download.example.com:/centos/$version/Server/$arch/os/
Synchronized content on Capsule Servers always uses an HTTP path. Capsule Server managed content does not support NFS paths.
-
-
From the Operating system family list, select the distribution or family of the installation medium. For example, CentOS and Fedora are in the
Red Hat
family. - Click the Organizations and Locations tabs, to change the provisioning context. Satellite Server adds the installation medium to the set provisioning context.
- Click Submit to save your installation medium.
For CLI Users
Create the installation medium using the
hammer medium create
command:# hammer medium create --name "CustomOS" --os-family "Redhat" \ --path 'http://download.example.com/centos/$version/Server/$arch/os/' \ --organizations "My_Organization" --locations "My_Location"
2.9. Creating Partition Tables
A partition table is a type of template that defines the way Satellite Server configures the disks available on a new host. A Partition table uses the same ERB syntax as provisioning templates. Red Hat Satellite contains a set of default partition tables to use, including a Kickstart default
. You can also edit partition table entries to configure the preferred partitioning scheme, or create a partition table entry and add it to the operating system entry.
Procedure
- In the Satellite web UI, navigate to Hosts > Partition Tables and click Create Partition Table.
- In the Name field, enter a name for the partition table.
- Select the Default check box if you want to set the template to automatically associate with new organizations or locations.
- Select the Snippet check box if you want to identify the template as a reusable snippet for other partition tables.
- From the Operating System Family list, select the distribution or family of the partitioning layout. For example, Red Hat Enterprise Linux, CentOS, and Fedora are in the Red Hat family.
In the Template editor field, enter the layout for the disk partition. For example:
zerombr clearpart --all --initlabel autopart
You can also use the Template file browser to upload a template file.
The format of the layout must match that for the intended operating system. For example, Red Hat Enterprise Linux 7.2 requires a layout that matches a kickstart file.
- In the Audit Comment field, add a summary of changes to the partition layout.
- Click the Organizations and Locations tabs to add any other provisioning contexts that you want to associate with the partition table. Satellite adds the partition table to the current provisioning context.
- Click Submit to save your partition table.
For CLI Users
-
Before you create a partition table with the CLI, create a plain text file that contains the partition layout. This example uses the
~/my-partition
file. Create the installation medium using the
hammer partition-table create
command:# hammer partition-table create --name "My Partition" --snippet false \ --os-family Redhat --file ~/my-partition --organizations "My_Organization" \ --locations "My_Location"
2.10. Dynamic Partition Example
Using an Anaconda kickstart template, the following section instructs Anaconda to erase the whole disk, automatically partition, enlarge one partition to maximum size, and then proceed to the next sequence of events in the provisioning process:
zerombr clearpart --all --initlabel autopart <%= host_param('autopart_options') %>
Dynamic partitioning is executed by the installation program. Therefore, you can write your own rules to specify how you want to partition disks according to runtime information from the node, for example, disk sizes, number of drives, vendor, or manufacturer.
If you want to provision servers and use dynamic partitioning, add the following example as a template. When the #Dynamic
entry is included, the content of the template loads into a %pre
shell scriplet and creates a /tmp/diskpart.cfg
that is then included into the Kickstart partitioning section.
#Dynamic (do not remove this line) MEMORY=$((`grep MemTotal: /proc/meminfo | sed 's/^MemTotal: *//'|sed 's/ .*//'` / 1024)) if [ "$MEMORY" -lt 2048 ]; then SWAP_MEMORY=$(($MEMORY * 2)) elif [ "$MEMORY" -lt 8192 ]; then SWAP_MEMORY=$MEMORY elif [ "$MEMORY" -lt 65536 ]; then SWAP_MEMORY=$(($MEMORY / 2)) else SWAP_MEMORY=32768 fi cat <<EOF > /tmp/diskpart.cfg zerombr yes clearpart --all --initlabel part /boot --fstype ext4 --size 200 --asprimary part swap --size "$SWAP_MEMORY" part / --fstype ext4 --size 1024 --grow EOF
2.11. Provisioning Templates
A provisioning template defines the way Satellite Server installs an operating system on a host.
Red Hat Satellite includes many template examples. In the Satellite web UI, navigate to Hosts > Provisioning templates to view them. You can create a template or clone a template and edit the clone. For help with templates, navigate to Hosts > Provisioning templates > Create Template > Help.
Templates accept the Embedded Ruby (ERB) syntax. For more information, see Template Writing Reference in Managing Hosts.
You can download provisioning templates. Before you can download the template, you must create a debug certificate. For more information, see Creating an Organization Debug Certificate in the Content Management Guide.
You can synchronize templates between Satellite Server and a Git repository or a local directory. For more information, see Synchronizing Templates Repositories in the Managing Hosts guide.
To view the history of changes applied to a template, navigate to Hosts > Provisioning templates, select one of the templates, and click History. Click Revert to override the content with the previous version. You can also revert to an earlier change. Click Show Diff to see information about a specific change:
- The Template Diff tab displays changes in the body of a provisioning template.
- The Details tab displays changes in the template description.
- The History tab displays the user who made a change to the template and date of the change.
2.12. Types of Provisioning Templates
There are various types of provisioning templates:
- Provision
- The main template for the provisioning process. For example, a kickstart template. For more information about kickstart template syntax, see the Kickstart Syntax Reference in the Red Hat Enterprise Linux 7 Installation Guide.
- PXELinux, PXEGrub, PXEGrub2
- PXE-based templates that deploy to the template Capsule associated with a subnet to ensure that the host uses the installer with the correct kernel options. For BIOS provisioning, select PXELinux template. For UEFI provisioning, select PXEGrub2.
- Finish
Post-configuration scripts to execute using an SSH connection when the main provisioning process completes. You can use Finishing templates only for imaged-based provisioning in virtual or cloud environments that do not support user_data. Do not confuse an image with a foreman discovery ISO, which is sometimes called a Foreman discovery image. An image in this context is an install image in a virtualized environment for easy deployment.
When a finish script successfully exits with the return code
0
, Red Hat Satellite treats the code as a success and the host exits the build mode. Note that there are a few finish scripts with a build mode that uses a call back HTTP call. These scripts are not used for image-based provisioning, but for post configuration of operating-system installations such as Debian, Ubuntu, and BSD.- user_data
Post-configuration scripts for providers that accept custom data, also known as seed data. You can use the user_data template to provision virtual machines in cloud or virtualised environments only. This template does not require Satellite to be able to reach the host; the cloud or virtualization platform is responsible for delivering the data to the image.
Ensure that the image that you want to provision has the software to read the data installed and set to start during boot. For example,
cloud-init
, which expects YAML input, orignition
, which expects JSON input.- cloud_init
Some environments, such as VMWare, either do not support custom data or have their own data format that limits what can be done during customization. In this case, you can configure a cloud-init client with the
foreman
plug-in, which attempts to download the template directly from Satellite over HTTP or HTTPS. This technique can be used in any environment, preferably virtualized.Ensure that you meet the following requirements to use the
cloud_init
template:- Ensure that the image that you want to provision has the software to read the data installed and set to start during boot.
A provisioned host is able to reach Satellite from the IP address that matches the host’s provisioning interface IP.
Note that cloud-init does not work behind NAT.
- Bootdisk
- Templates for PXE-less boot methods.
- Kernel Execution (kexec)
Kernel execution templates for PXE-less boot methods.
NoteKernel Execution is a Technology Preview feature. Technology Preview features are not fully supported under Red Hat Subscription Service Level Agreements (SLAs), may not be functionally complete, and are not intended for production use. However, these features provide early access to upcoming product innovations, enabling customers to test functionality and provide feedback during the development process.
- Script
- An arbitrary script not used by default but useful for custom tasks.
- ZTP
- Zero Touch Provisioning templates.
- POAP
- PowerOn Auto Provisioning templates.
- iPXE
-
Templates for
iPXE
orgPXE
environments to use instead of PXELinux.
2.13. Creating Provisioning Templates
A provisioning template defines the way Satellite Server installs an operating system on a host. Use this procedure to create a new provisioning template.
Procedure
- In the Satellite web UI, navigate to Hosts > Provisioning Templates and click Create Template.
- In the Name field, enter a name for the provisioning template.
- Fill in the rest of the fields as required. The Help tab provides information about the template syntax and details the available functions, variables, and methods that can be called on different types of objects within the template.
For CLI Users
-
Before you create a template with the CLI, create a plain text file that contains the template. This example uses the
~/my-template
file. Create the template using the
hammer template create
command and specify the type with the--type
option:# hammer template create --name "My Provisioning Template" \ --file ~/my-template --type provision --organizations "My_Organization" \ --locations "My_Location"
2.14. Cloning Provisioning Templates
A provisioning template defines the way Satellite Server installs an operating system on a host. Use this procedure to clone a template and add your updates to the clone.
Procedure
- In the Satellite web UI, navigate to Hosts > Provisioning Templates and search for the template that you want to use.
- Click Clone to duplicate the template.
- In the Name field, enter a name for the provisioning template.
- Select the Default check box to set the template to associate automatically with new organizations or locations.
- In the Template editor field, enter the body of the provisioning template. You can also use the Template file browser to upload a template file.
- In the Audit Comment field, enter a summary of changes to the provisioning template for auditing purposes.
- Click the Type tab and if your template is a snippet, select the Snippet check box. A snippet is not a standalone provisioning template, but a part of a provisioning template that can be inserted into other provisioning templates.
- From the Type list, select the type of the template. For example, Provisioning template.
- Click the Association tab and from the Applicable Operating Systems list, select the names of the operating systems that you want to associate with the provisioning template.
- Optionally, click Add combination and select a host group from the Host Group list or an environment from the Environment list to associate provisioning template with the host groups and environments.
- Click the Organizations and Locations tabs to add any additional contexts to the template.
- Click Submit to save your provisioning template.
2.15. Creating Compute Profiles
You can use compute profiles to predefine virtual machine hardware details such as CPUs, memory, and storage. A default installation of Red Hat Satellite contains three predefined profiles:
-
1-Small
-
2-Medium
-
3-Large
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles and click Create Compute Profile.
- In the Name field, enter a name for the profile.
- Click Submit. A new window opens with the name of the compute profile.
- In the new window, click the name of each compute resource and edit the attributes you want to set for this compute profile.
For CLI Users
The compute profile CLI commands are not yet implemented in Red Hat Satellite 6.8.
2.16. Setting a Default Encrypted Root Password for Hosts
If you do not want to set a plain text default root password for the hosts that you provision, you can use a default encrypted password.
Procedure
Generate an encrypted password:
# python -c 'import crypt,getpass;pw=getpass.getpass(); print(crypt.crypt(pw)) if (pw==getpass.getpass("Confirm: ")) else exit()'
- Copy the password for later use.
- In the Satellite web UI, navigate to Administer > Settings.
- On the Settings page, select the Provisioning tab.
- In the Name column, navigate to Root password, and click Click to edit.
- Paste the encrypted password, and click Save.
2.17. Using noVNC to Access Virtual Machines
You can use your browser to access the VNC console of VMs created by Satellite.
Satellite supports using noVNC on the following virtualization platforms:
- VMware
- Libvirt
- Red Hat Virtualization
Prerequisites
- You must have a virtual machine created by Satellite.
- For existing virtual machines, ensure that the Display type in the Compute Resource settings is VNC.
- You must import the Katello root CA certificate into your Satellite Server. Adding a security exception in the browser is not enough for using noVNC. For more information, see the Installing the Katello Root CA Certificate section in the Administering Red Hat Satellite guide.
Procedure
On the VM host system, configure the firewall to allow VNC service on ports 5900 to 5930:
On Red Hat Enterprise Linux 6:
# iptables -A INPUT -p tcp --dport 5900:5930 -j ACCEPT # service iptables save
On Red Hat Enterprise Linux 7:
# firewall-cmd --add-port=5900-5930/tcp # firewall-cmd --add-port=5900-5930/tcp --permanent
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and select the name of a compute resource.
- In the Virtual Machines tab, select the name of a VM host. Ensure the machine is powered on and then select Console.
Chapter 3. Configuring Networking
Each provisioning type requires some network configuration. Use this chapter to configure network services in your integrated Capsule on Satellite Server.
New hosts must have access to your Capsule Server. Capsule Server can be either your integrated Capsule on Satellite Server or an external Capsule Server. You might want to provision hosts from an external Capsule Server when the hosts are on isolated networks and cannot connect to Satellite Server directly, or when the content is synchronized with the Capsule Server. Provisioning using the external Capsule Server can save on network bandwidth.
Configuring Capsule Server has two basic requirements:
Configuring network services. This includes:
- Content delivery services
- Network services (DHCP, DNS, and TFTP)
- Puppet configuration
- Defining network resource data in Satellite Server to help configure network interfaces on new hosts.
The following instructions have similar applications to configuring standalone Capsules managing a specific network. To configure Satellite to use external DHCP, DNS, and TFTP services, see Configuring External Services in Installing Satellite Server from a Connected Network.
3.1. Network Resources
Satellite contains networking resources that you must set up and configure to create a host. Satellite includes the following networking resources:
- Domain
-
You must assign every host that is managed by Satellite to a domain. Using the domain, Satellite can manage A, AAAA, and PTR records. Even if you do not want Satellite to manage your DNS servers, you still must create and associate at least one domain. Domains are included in the naming conventions Satellite hosts, for example, a host with the name
test123
in theexample.com
domain has the fully qualified domain nametest123.example.com
. - Subnet
You must assign every host managed by Satellite to a subnet. Using subnets, Satellite can then manage IPv4 reservations. If there are no reservation integrations, you still must create and associate at least one subnet. When you manage a subnet in Satellite, you cannot create DHCP records for that subnet outside of Satellite. In Satellite, you can use IP Address Management (IPAM) to manage IP addresses with one of the following options:
DHCP: DHCP Capsule manages the assignment of IP addresses by finding the next available IP address starting from the first address of the range and skipping all addresses that are reserved. Before assigning an IP address, Capsule sends an ICMP and TCP pings to check whether the IP address is in use. Note that if a host is powered off, or has a firewall configured to disable connections, Satellite makes a false assumption that the IP address is available. This check does not work for hosts that are turned off, therefore, the DHCP option can only be used with subnets that Satellite controls and that do not have any hosts created externally.
The Capsule DHCP module retains the offered IP addresses for a short period of time to prevent collisions during concurrent access, so some IP addresses in the IP range might remain temporarily unused.
- Internal DB: Satellite finds the next available IP address from the Subnet range by excluding all IP addresses from the Satellite database in sequence. The primary source of data is the database, not DHCP reservations. This IPAM is not safe when multiple hosts are being created in parallel; in that case, use DHCP or Random DB IPAM instead.
- Random DB: Satellite finds the next available IP address from the Subnet range by excluding all IP addresses from the Satellite database randomly. The primary source of data is the database, not DHCP reservations. This IPAM is safe to use with concurrent host creation as IP addresses are returned in random order, minimizing the chance of a conflict.
- EUI-64: Extended Unique Identifier (EUI) 64bit IPv6 address generation, as per RFC2373, is obtained through the 48-bit MAC address.
- External IPAM: Delegates IPAM to an external system through Capsule feature. Satellite currently does not ship with any external IPAM implementations, but several plug-ins are in development.
None: IP address for each host must be entered manually.
Options DHCP, Internal DB and Random DB can lead to DHCP conflicts on subnets with records created externally. These subnets must be under exclusive Satellite control.
For more information about adding a subnet, see Section 3.7, “Adding a Subnet to Satellite Server”.
- DHCP Ranges
- You can define the same DHCP range in Satellite Server for both discovered and provisioned systems, but use a separate range for each service within the same subnet.
3.2. Satellite and DHCP Options
Satellite manages DHCP reservations through a DHCP Capsule. Satellite also sets the next-server
and filename
DHCP options.
The next-server option
The next-server
option provides the IP address of the TFTP server to boot from. This option is not set by default and must be set for each TFTP Capsule. You can use the satellite-installer
command with the --foreman-proxy-tftp-servername
option to set the TFTP server in the /etc/foreman-proxy/settings.d/tftp.yml
file:
# satellite-installer --foreman-proxy-tftp-servername 1.2.3.4
Each TFTP Capsule then reports this setting through the API and Satellite can retrieve the configuration information when it creates the DHCP record.
When the PXE loader is set to none
, Satellite does not populate the next-server
option into the DHCP record.
If the next-server
option remains undefined, Satellite uses reverse DNS search to find a TFTP server address to assign, but you might encounter the following problems:
- DNS timeouts during provisioning
- Querying of incorrect DNS server. For example, authoritative rather than caching
-
Errors about incorrect IP address for the TFTP server. For example,
PTR record was invalid
If you encounter these problems, check the DNS setup on both Satellite and Capsule, specifically the PTR record resolution.
The filename option
The filename
option contains the full path to the file that downloads and executes during provisioning. The PXE loader that you select for the host or host group defines which filename
option to use. When the PXE loader is set to none
, Satellite does not populate the filename
option into the DHCP record. Depending on the PXE loader option, the filename
changes as follows:
PXE loader option | filename entry | Notes |
---|---|---|
PXELinux BIOS |
| |
PXELinux UEFI |
| |
iPXE Chain BIOS |
| |
PXEGrub2 UEFI |
| x64 can differ depending on architecture |
iPXE UEFI HTTP |
|
Requires the |
Grub2 UEFI HTTP |
|
Requires the |
3.3. Troubleshooting DHCP Problems in Satellite
Satellite can manage an ISC DHCP server on internal or external DHCP Capsule. Satellite can list, create, and delete DHCP reservations and leases. However, there are a number of problems that you might encounter on occasions.
Out of sync DHCP records
When an error occurs during DHCP orchestration, DHCP records in the Satellite database and the DHCP server might not match. To fix this, you must add missing DHCP records from the Satellite database to the DHCP server and then remove unwanted records from the DHCP server as per the following steps:
To preview the DHCP records that are going to be added to the DHCP server, enter the following command:
# foreman-rake orchestration:dhcp:add_missing subnet_name=NAME
If you are satisfied by the preview changes in the previous step, apply them by entering the above command with the
perform=1
argument:# foreman-rake orchestration:dhcp:add_missing subnet_name=NAME perform=1
To keep DHCP records in Satellite and in the DHCP server synchronized, you can remove unwanted DHCP records from the DHCP server. Note that Satellite assumes that all managed DHCP servers do not contain third-party records, therefore, this step might delete those unexpected records. To preview what records are going to be removed from the DHCP server, enter the following command:
# foreman-rake orchestration:dhcp:remove_offending subnet_name=NAME
If you are satisfied by the preview changes in the previous step, apply them by entering the above command with the
perform=1
argument:# foreman-rake orchestration:dhcp:remove_offending subnet_name=NAME perform=1
PXE loader option change
When the PXE loader option is changed for an existing host, this causes a DHCP conflict. The only workaround is to overwrite the DHCP entry.
Incorrect permissions on DHCP files
An operating system update can update the dhcpd
package. This causes the permissions of important directories and files to reset so that the DHCP Capsule cannot read the required information.
For more information, see DHCP error while provisioning host from Satellite server Error ERF12-6899 ProxyAPI::ProxyException: Unable to set DHCP entry RestClient::ResourceNotFound 404 Resource Not Found on Red Hat Knowledgebase.
Changing the DHCP Capsule entry
Satellite manages DHCP records only for hosts that are assigned to subnets with a DHCP Capsule set. If you create a host and then clear or change the DHCP Capsule, when you attempt to delete the host, the action fails.
If you create a host without setting the DHCP Capsule and then try to set the DHCP Capsule, this causes DHCP conflicts.
Deleted hosts entries in the dhcpd.leases file
Any changes to a DHCP lease are appended to the end of the dhcpd.leases
file. Because entries are appended to the file, it is possible that two or more entries of the same lease can exist in the dhcpd.leases
file at the same time. When there are two or more entries of the same lease, the last entry in the file takes precedence. Group, subgroup and host declarations in the lease file are processed in the same manner. If a lease is deleted, { deleted; }
is appended to the declaration.
3.4. Prerequisites for Image Based Provisioning
Post-Boot Configuration Method
Images that use the finish
post-boot configuration scripts require a managed DHCP server, such as Satellite’s integrated Capsule or an external Capsule. The host must be created with a subnet associated with a DHCP Capsule, and the IP address of the host must be a valid IP address from the DHCP range.
It is possible to use an external DHCP service, but IP addresses must be entered manually. The SSH credentials corresponding to the configuration in the image must be configured in Satellite to enable the post-boot configuration to be made.
Check the following items when troubleshooting a virtual machine booted from an image that depends on post-configuration scripts:
- The host has a subnet assigned in Satellite Server.
- The subnet has a DHCP Capsule assigned in Satellite Server.
- The host has a valid IP address assigned in Satellite Server.
- The IP address acquired by the virtual machine using DHCP matches the address configured in Satellite Server.
- The virtual machine created from an image responds to SSH requests.
- The virtual machine created from an image authorizes the user and password, over SSH, which is associated with the image being deployed.
- Satellite Server has access to the virtual machine via SSH keys. This is required for the virtual machine to receive post-configuration scripts from Satellite Server.
Pre-Boot Initialization Configuration Method
Images that use the cloud-init
scripts require a DHCP server to avoid having to include the IP address in the image. A managed DHCP Capsule is preferred. The image must have the cloud-init
service configured to start when the system boots and fetch a script or configuration data to use in completing the configuration.
Check the following items when troubleshooting a virtual machine booted from an image that depends on initialization scripts included in the image:
- There is a DHCP server on the subnet.
-
The virtual machine has the
cloud-init
service installed and enabled.
For information about the differing levels of support for finish
and cloud-init
scripts in virtual-machine images, see the Red Hat Knowledgebase Solution What are the supported compute resources for the finish and cloud-init scripts on the Red Hat Customer Portal.
3.5. Configuring Network Services
Some provisioning methods use Capsule Server services. For example, a network might require the Capsule Server to act as a DHCP server. A network can also use PXE boot services to install the operating system on new hosts. This requires configuring the Capsule Server to use the main PXE boot services: DHCP, DNS, and TFTP.
Use the satellite-installer
command with the options to configure these services on the Satellite Server.
To configure these services on an external Capsule Server, run satellite-installer --scenario capsule
.
Satellite Server uses eth0
for external communication, such as connecting to Red Hat’s CDN.
Procedure
To configure network services on Satellite’s integrated Capsule, complete the following steps:
Enter the
satellite-installer
command to configure the required network services:# satellite-installer --foreman-proxy-dhcp true \ --foreman-proxy-dhcp-managed true \ --foreman-proxy-dhcp-gateway "192.168.140.1" \ --foreman-proxy-dhcp-interface "eth1" \ --foreman-proxy-dhcp-nameservers "192.168.140.2" \ --foreman-proxy-dhcp-range "192.168.140.10 192.168.140.110" \ --foreman-proxy-dhcp-server "192.168.140.2" \ --foreman-proxy-dns true \ --foreman-proxy-dns-managed true \ --foreman-proxy-dns-forwarders "8.8.8.8; 8.8.4.4" \ --foreman-proxy-dns-interface "eth1" \ --foreman-proxy-dns-reverse "140.168.192.in-addr.arpa" \ --foreman-proxy-dns-server "127.0.0.1" \ --foreman-proxy-dns-zone "example.com" \ --foreman-proxy-tftp true \ --foreman-proxy-tftp-managed true
Find the Capsule Server that you configure:
# hammer proxy list
Refresh features of the Capsule Server to view the changes:
# hammer proxy refresh-features --name "satellite.example.com"
Verify the services configured on the Capsule Server:
# hammer proxy info --name "satellite.example.com"
3.5.1. Multiple Subnets or Domains via Installer
The satellite-installer options allow only for a single DHCP subnet or DNS domain. One way to define more than one subnet is by using a custom configuration file.
For every additional subnet or domain, create an entry in /etc/foreman-installer/custom-hiera.yaml
file:
dhcp::pools: isolated.lan: network: 192.168.99.0 mask: 255.255.255.0 gateway: 192.168.99.1 range: 192.168.99.5 192.168.99.49 dns::zones: # creates @ SOA $::fqdn root.example.com. # creates $::fqdn A $::ipaddress example.com: {} # creates @ SOA test.example.net. hostmaster.example.com. # creates test.example.net A 192.0.2.100 example.net: soa: test.example.net soaip: 192.0.2.100 contact: hostmaster.example.com. # creates @ SOA $::fqdn root.example.org. # does NOT create an A record example.org: reverse: true # creates @ SOA $::fqdn hostmaster.example.com. 2.0.192.in-addr.arpa: reverse: true contact: hostmaster.example.com.
Execute satellite-installer to perform the changes and verify that the /etc/dhcp/dhcpd.conf
contains appropriate entries. Subnets must be then defined in Satellite database.
3.5.2. DHCP, DNS, and TFTP Options for Network Configuration
DHCP Options
- --foreman-proxy-dhcp
-
Enables the DHCP service. You can set this option to
true
orfalse
. - --foreman-proxy-dhcp-managed
-
Enables Foreman to manage the DHCP service. You can set this option to
true
orfalse
. - --foreman-proxy-dhcp-gateway
- The DHCP pool gateway. Set this to the address of the external gateway for hosts on your private network.
- --foreman-proxy-dhcp-interface
-
Sets the interface for the DHCP service to listen for requests. Set this to
eth1
. - --foreman-proxy-dhcp-nameservers
-
Sets the addresses of the nameservers provided to clients through DHCP. Set this to the address for Satellite Server on
eth1
. - --foreman-proxy-dhcp-range
- A space-separated DHCP pool range for Discovered and Unmanaged services.
- --foreman-proxy-dhcp-server
- Sets the address of the DHCP server to manage.
DNS Options
- --foreman-proxy-dns
-
Enables DNS service. You can set this option to
true
orfalse
. - --foreman-proxy-dns-managed
-
Enables Foreman to manage the DNS service. You can set this option to
true
orfalse
. - --foreman-proxy-dns-forwarders
- Sets the DNS forwarders. Set this to your DNS servers.
- --foreman-proxy-dns-interface
-
Sets the interface to listen for DNS requests. Set this to
eth1
. - --foreman-proxy-dns-reverse
- The DNS reverse zone name.
- --foreman-proxy-dns-server
- Sets the address of the DNS server to manage.
- --foreman-proxy-dns-zone
- Sets the DNS zone name.
TFTP Options
- --foreman-proxy-tftp
-
Enables TFTP service. You can set this option to
true
orfalse
. - --foreman-proxy-tftp-managed
-
Enables Foreman to manage the TFTP service. You can set this option to
true
orfalse
. - --foreman-proxy-tftp-servername
- Sets the TFTP server to use. Ensure that you use Capsule’s IP address.
Run satellite-installer --help
to view more options related to DHCP, DNS, TFTP, and other Satellite Capsule services
3.5.3. Using TFTP Services through NAT
You can use Satellite TFTP services through NAT. To do this, on all NAT routers or firewalls, you must enable a TFTP service on UDP port 69 and enable the TFTP state tracking feature. For more information, see the documentation for your NAT device.
Using NAT on Red Hat Enterprise Linux 7:
Use the following command to allow TFTP service on UDP port 69, load the kernel TFTP state tracking module, and make the changes persistent:
# firewall-cmd --add-service=tftp && firewall-cmd --runtime-to-permanent
For a NAT running on Red Hat Enterprise Linux 6:
Configure the firewall to allow TFTP service UDP on port 69.
# iptables -A OUTPUT -i eth0 -p udp --sport 69 -m state \ --state ESTABLISHED -j ACCEPT # service iptables save
Load the
ip_conntrack_tftp
kernel TFTP state module. In the/etc/sysconfig/iptables-config
file, locateIPTABLES_MODULES
and addip_conntrack_tftp
as follows:IPTABLES_MODULES="ip_conntrack_tftp"
3.6. Adding a Domain to Satellite Server
Satellite Server defines domain names for each host on the network. Satellite Server must have information about the domain and the Capsule Server responsible for domain name assignment.
Checking for Existing Domains
Satellite Server might already have the relevant domain created as part of Satellite Server installation. Switch the context to Any Organization
and Any Location
then check the domain list to see if it exists.
DNS Server Configuration Considerations
During the DNS record creation, Satellite performs conflict DNS lookups to verify that the host name is not in active use. This check runs against one of the following DNS servers:
- The system-wide resolver if Administer > Settings > Query local nameservers is set to true.
- The nameservers that are defined in the subnet associated with the host.
- The authoritative NS-Records that are queried from the SOA from the domain name associated with the host.
If you experience timeouts during DNS conflict resolution, check the following settings:
- The subnet nameservers must be reachable from Satellite Server.
- The domain name must have a Start of Authority (SOA) record available from Satellite Server.
-
The system resolver in the
/etc/resolv.conf
file must have a valid and working configuration.
Procedure
To add a domain to Satellite, complete the following steps:
- In the Satellite web UI, navigate to Infrastructure > Domains and click Create Domain.
- In the DNS Domain field, enter the full DNS domain name.
- In the Fullname field, enter the plain text name of the domain.
- Click the Parameters tab and configure any domain level parameters to apply to hosts attached to this domain. For example, user defined Boolean or string parameters to use in templates.
- Click Add Parameter and fill in the Name and Value fields.
- Click the Locations tab, and add the location where the domain resides.
- Click the Organizations tab, and add the organization that the domain belongs to.
- Click Submit to save the changes.
For CLI Users
Use the hammer domain create
command to create a domain:
# hammer domain create --name "domain_name.com" \ --description "My example domain" --dns-id 1 \ --locations "My_Location" --organizations "My_Organization"
In this example, the --dns-id
option uses 1
, which is the ID of your integrated Capsule on Satellite Server.
3.7. Adding a Subnet to Satellite Server
You must add information for each of your subnets to Satellite Server because Satellite configures interfaces for new hosts. To configure interfaces, Satellite Server must have all the information about the network that connects these interfaces.
Procedure
To add a subnet to Satellite Server, complete the following steps:
- In the Satellite web UI, navigate to Infrastructure > Subnets, and in the Subnets window, click Create Subnet.
- In the Name field, enter a name for the subnet.
- In the Description field, enter a description for the subnet.
- In the Network address field, enter the network address for the subnet.
- In the Network prefix field, enter the network prefix for the subnet.
- In the Network mask field, enter the network mask for the subnet.
- In the Gateway address field, enter the external gateway for the subnet.
- In the Primary DNS server field, enter a primary DNS for the subnet.
- In the Secondary DNS server, enter a secondary DNS for the subnet.
- From the IPAM list, select the method that you want to use for IP address management (IPAM). For more information about IPAM, see Section 3.1, “Network Resources”.
- Enter the information for the IPAM method that you select. Click the Remote Execution tab and select the Capsule that controls the remote execution.
- Click the Domains tab and select the domains that apply to this subnet.
- Click the Capsules tab and select the Capsule that applies to each service in the subnet, including DHCP, TFTP, and reverse DNS services.
- Click the Parameters tab and configure any subnet level parameters to apply to hosts attached to this subnet. For example, user defined Boolean or string parameters to use in templates.
- Click the Locations tab and select the locations that use this Capsule.
- Click the Organizations tab and select the organizations that use this Capsule.
- Click Submit to save the subnet information.
For CLI Users
Create the subnet with the following command:
# hammer subnet create --name "My_Network" \ --description "your_description" \ --network "192.168.140.0" --mask "255.255.255.0" \ --gateway "192.168.140.1" --dns-primary "192.168.140.2" \ --dns-secondary "8.8.8.8" --ipam "DHCP" \ --from "192.168.140.111" --to "192.168.140.250" --boot-mode "DHCP" \ --domains "example.com" --dhcp-id 1 --dns-id 1 --tftp-id 1 \ --locations "My_Location" --organizations "My_Organization"
In this example, the --dhcp-id
, --dns-id
, and --tftp-id
options use 1, which is the ID of the integrated Capsule in Satellite Server.
Chapter 4. Using Infoblox as DHCP and DNS Providers
You can use Capsule Server to connect to your Infoblox application to create and manage DHCP and DNS records, and to reserve IP addresses.
The supported Infoblox version is NIOS 8.0 or higher and Satellite 6.8 or higher.
4.1. Limitations
All DHCP and DNS records can be managed only in a single Network or DNS view. After you install the Infoblox modules on Capsule and set up the view using the satellite-installer
command, you cannot edit the view.
Capsule Server communicates with a single Infoblox node using the standard HTTPS web API. If you want to configure clustering and High Availability, make the configurations in Infoblox.
Hosting PXE-related files using Infoblox’s TFTP functionality is not supported. You must use Capsule as a TFTP server for PXE provisioning. For more information, see Chapter 3, Configuring Networking.
Satellite IPAM feature cannot be integrated with Infoblox.
4.2. Prerequisites
You must have Infoblox account credentials to manage DHCP and DNS entries in Satellite.
Ensure that you have Infoblox administration roles with the names: DHCP Admin
and DNS Admin
.
The administration roles must have permissions or belong to an admin group that permits the accounts to perform tasks through the Infoblox API.
4.3. Installing the Infoblox CA Certificate on Capsule Server
You must install Infoblox HTTPS CA certificate on the base system for all Capsules that you want to integrate with Infoblox applications.
You can download the certificate from the Infoblox web UI, or you can use the following OpenSSL commands to download the certificate:
# update-ca-trust enable
# openssl s_client -showcerts -connect infoblox.example.com:443 </dev/null | \
openssl x509 -text >/etc/pki/ca-trust/source/anchors/infoblox.crt
# update-ca-trust extract
-
The
infoblox.example.com
entry must match the host name for the Infoblox application in the X509 certificate.
To test the CA certificate, use a CURL query:
# curl -u admin:password https://infoblox.example.com/wapi/v2.0/network
Example positive response:
[
{
"_ref": "network/ZG5zLm5ldHdvcmskMTkyLjE2OC4yMDIuMC8yNC8w:infoblox.example.com/24/default",
"network": "192.168.202.0/24",
"network_view": "default"
}
]
Use the following Red Hat Knowledgebase article to install the certificate: How to install a CA certificate on Red Hat Enterprise Linux 6 / 7.
4.4. Installing the DHCP Infoblox module
Use this procedure to install the DHCP Infoblox module on Capsule. Note that you cannot manage records in separate views.
You can also install DHCP and DNS Infoblox modules simultaneously by combining this procedure and Section 4.5, “Installing the DNS Infoblox Module”
DHCP Infoblox Record Type Considerations
Use only the --foreman-proxy-plugin-dhcp-infoblox-record-type fixedaddress
option to configure the DHCP and DNS modules.
Configuring both DHCP and DNS Infoblox modules with the host
record type setting causes DNS conflicts and is not supported. If you install the Infoblox module on Capsule Server with the --foreman-proxy-plugin-dhcp-infoblox-record-type
option set to host
, you must unset both DNS Capsule and Reverse DNS Capsule options because Infoblox does the DNS management itself. You cannot use the host
option without creating conflicts and, for example, being unable to rename hosts in Satellite.
Procedure
To install the Infoblox module for DHCP, complete the following steps:
On Capsule, enter the following command:
# satellite-installer --enable-foreman-proxy-plugin-dhcp-infoblox \ --foreman-proxy-dhcp true \ --foreman-proxy-dhcp-managed false \ --foreman-proxy-dhcp-provider infoblox \ --foreman-proxy-plugin-dhcp-infoblox-record-type fixedaddress \ --foreman-proxy-dhcp-server infoblox.example.com \ --foreman-proxy-plugin-dhcp-infoblox-username admin \ --foreman-proxy-plugin-dhcp-infoblox-password infoblox \ --foreman-proxy-plugin-dhcp-infoblox-network-view default \ --foreman-proxy-plugin-dhcp-infoblox-dns-view default
- In the Satellite web UI, navigate to Infrastructure > Capsules and select the Capsule with the Infoblox DHCP module and click Refresh.
- Ensure that the dhcp features are listed.
- For all domains managed through Infoblox, ensure that the DNS Capsule is set for that domain. To verify, in the Satellite web UI, navigate to Infrastructure > Domains, and inspect the settings of each domain.
- For all subnets managed through Infoblox, ensure that DHCP Capsule and Reverse DNS Capsule is set. To verify, in the Satellite web UI, navigate to Infrastructure > Subnets, and inspect the settings of each subnet.
4.5. Installing the DNS Infoblox Module
Use this procedure to install the DNS Infoblox module on Capsule. You can also install DHCP and DNS Infoblox modules simultaneously by combining this procedure and Section 4.4, “Installing the DHCP Infoblox module”.
DNS records are managed only in the default DNS view, it’s not possible to specify which DNS view to use.
To install the DNS Infoblox module, complete the following steps:
On Capsule, enter the following command to configure the Infoblox module:
# satellite-installer --enable-foreman-proxy-plugin-dns-infoblox \ --foreman-proxy-dns true \ --foreman-proxy-dns-managed false \ --foreman-proxy-dns-provider infoblox \ --foreman-proxy-plugin-dns-infoblox-dns-server infoblox.example.com \ --foreman-proxy-plugin-dns-infoblox-username admin \ --foreman-proxy-plugin-dns-infoblox-password infoblox \ --foreman-proxy-plugin-dns-infoblox-dns-view default
Optionally, you can change the value of the
--foreman-proxy-plugin-dns-infoblox-dns-view
option to specify a DNS Infoblox view other than the default view.- In the Satellite web UI, navigate to Infrastructure > Capsules and select the Capsule with the Infoblox DNS module and click Refresh.
- Ensure that the dns features are listed.
Chapter 5. Configuring iPXE to Reduce Provisioning Times
You can use Satellite to configure PXELinux to chainboot iPXE and boot using the HTTP protocol if you have the following restrictions that prevent you from using PXE:
- A network with unmanaged DHCP servers.
- A PXE service that is blacklisted on your network or restricted by a firewall.
- An unreliable TFTP UDP-based protocol because of, for example, a low-bandwidth network.
iPXE Workflow Overview
The provisioning process using iPXE follows this workflow:
- A discovered host boots over PXE.
-
The host loads either
ipxe.efi
orundionly.0
. - The host initializes again on the network using DHCP.
- The DHCP server detects the iPXE firmware and returns the iPXE template URL with the bootstrap flag.
- The host requests iPXE template. Satellite does not recognize the host, and because the bootstrap flag is set, the host receives the iPXE intermediate script template that ships with Satellite.
- The host runs the intermediate iPXE script and downloads the discovery image.
- The host starts the discovery operating system and performs a discovery request.
- The host is scheduled for provisioning and restarts.
- The host boots over PXE.
- The previous workflow repeats, but Satellite recognizes the host’s remote IP address and instead of the intermediate template, the host receives a regular iPXE template.
- The host reads the iPXE configuration and boots the installer.
- From this point, the installation follows a regular PXE installation workflow.
Note that the workflow uses the discovery process, which is optional. To set up the discovery service, see Section 5.1, “Setting up the Discovery Service for iPXE”.
With Satellite, you can set up hosts to download either the ipxe.efi
or undionly.kpxe
over TFTP. When the file downloads, all communication continues using HTTP. Satellite uses the iPXE provisioning script either to load an operating system installer or the next entry in the boot order.
There are three methods of using iPXE with Red Hat Satellite:
- Chainbooting virtual machines using hypervisors that use iPXE as primary firmware.
- Using PXELinux through TFTP to chainload iPXE directly on bare metal hosts.
- Using PXELinux through UNDI, which uses HTTP to transfer the kernel and the initial RAM disk on bare-metal hosts.
Security Information
The iPXE binary in Red Hat Enterprise Linux is built without some security features. For this reason, you can only use HTTP, and cannot use HTTPS.
+ All security-related features of iPXE in Red Hat Enterprise Linux are not supported. For more information, see Red Hat Enterprise Linux HTTPS support in iPXE.
Prerequisites
Before you begin, ensure that the following conditions are met:
- A host exists on Red Hat Satellite to use.
- The MAC address of the provisioning interface matches the host configuration.
- The provisioning interface of the host has a valid DHCP reservation.
- The NIC is capable of PXE booting. For more information, see http://ipxe.org/appnote/hardware_drivers.
- The NIC is compatible with iPXE.
5.1. Setting up the Discovery Service for iPXE
On Capsule Server, install the Foreman discovery service:
# yum install foreman-discovery-image
On Capsule Server, enable the httpboot service:
# satellite-installer --foreman-proxy-httpboot true
- In the Satellite web UI, navigate to Administer > Settings, and click the Provisioning tab.
- Locate the Default PXE global template entry row and in the Value column, change the value to discovery.
5.2. Chainbooting virtual machines
Some virtualization hypervisors use iPXE as primary firmware for PXE booting. Because of this, you can chainboot without TFTP and PXELinux.
Chainbooting virtual machine workflow
Using virtualization hypervisors removes the need for TFTP and PXELinux. It has the following workflow:
- Virtual machine starts
- iPXE retrieves the network credentials using DHCP
- iPXE retrieves the HTTP address using DHCP
- iPXE chainloads the iPXE template from the template Capsule
- iPXE loads the kernel and initial RAM disk of the installer
If you want to use the discovery service with iPXE, see Section 5.1, “Setting up the Discovery Service for iPXE”.
Ensure that the hypervisor that you want to use supports iPXE. The following virtualization hypervisors support iPXE:
- libvirt
- Red Hat Virtualization
- RHEV
Configuring Satellite Server to use iPXE
You can use the default template to configure iPXE booting for hosts. If you want to change the default values in the template, clone the template and edit the clone.
Procedure
Copy a boot file to the TFTP directory on your Satellite Server:
For EFI systems, copy the
ipxe.efi
file:# cp /usr/share/ipxe/ipxe.efi /var/lib/tftpboot/
For BIOS systems, copy the
undionly.kpxe
file:# cp /usr/share/ipxe/undionly.kpxe /var/lib/tftpboot/undionly.0
-
In the Satellite web UI, navigate to Hosts > Provisioning Templates, enter
Kickstart default iPXE
and click Search. - Optional: If you want to change the template, click Clone, enter a unique name, and click Submit.
- Click the name of the template you want to use.
- If you clone the template, you can make changes you require on the Template tab.
- Click the Association tab, and select the operating systems that your host uses.
- Click the Locations tab, and add the location where the host resides.
- Click the Organizations tab, and add the organization that the host belongs to.
- Click Submit to save the changes.
- Navigate to Hosts > Operating systems and select the operating system of your host.
- Click the Templates tab.
- From the iPXE Template list, select the template you want to use.
- Click Submit to save the changes.
- Navigate to Hosts > All Hosts.
- In the Hosts page, select the host that you want to use.
- Select the Templates tab.
- From the iPXE template list, select Review to verify that the Kickstart default iPXE template is the correct template.
To use the iPXE bootstrapping feature for Satellite, configure the
dhcpd.conf
file as follows:if exists user-class and option user-class = "iPXE" { filename "http://satellite.example.com/unattended/iPXE?bootstrap=1"; } elsif option architecture = 00:06 { filename "ipxe.efi"; } elsif option architecture = 00:07 { filename "ipxe.efi"; } elsif option architecture = 00:09 { filename "ipxe.efi"; } else { filename "undionly.0"; }
If you use an isolated network, use a Capsule Server URL with TCP port
8000
, instead of the URL of Satellite Server.NoteUse
http://satellite.example.com/unattended/iPXE?bootstrap=1
when Capsule HTTP endpoint is disabled (installer option --foreman-proxy-http false). Template Capsule plug-in has the default value8000
when enabled and can be changed with--foreman-proxy-http-port installer
option. In that case, usehttp://capsule.example.com:8000
. You must update the/etc/dhcp/dhcpd.conf
file after every upgrade.
5.3. Chainbooting Satellite Server to use iPXE directly
Use this procedure to set up iPXE to use a built-in driver for network communication or UNDI interface. There are separate procedures to configure Satellite Server and Capsule to use iPXE.
You can use this procedure only with bare metal hosts.
Chainbooting iPXE directly or with UNDI workflow
- Host powers on
- PXE driver retrieves the network credentials using DHCP
-
PXE driver retrieves the PXELinux firmware
pxelinux.0
using TFTP - PXELinux searches for the configuration file on the TFTP server
-
PXELinux chainloads iPXE
ipxe.lkrn
orundionly-ipxe.0
- iPXE retrieves the network credentials using DHCP again
- iPXE retrieves HTTP address using DHCP
- iPXE chainloads the iPXE template from the template Capsule
- iPXE loads the kernel and initial RAM disk of the installer
If you want to use the discovery service with iPXE, see Section 5.1, “Setting up the Discovery Service for iPXE”.
Configuring Red Hat Satellite Server to use iPXE
You can use the default template to configure iPXE booting for hosts. If you want to change the default values in the template, clone the template and edit the clone.
Procedure
-
In the Satellite web UI, navigate to Hosts > Provisioning Templates, enter
PXELinux chain iPXE
or, for BIOS systems, enterPXELinux chain iPXE UNDI
, and click Search. - Optional: If you want to change the template, click Clone, enter a unique name, and click Submit.
- Click the name of the template you want to use.
- If you clone the template, you can make changes you require on the Template tab.
- Click the Association tab, and select the operating systems that your host uses.
- Click the Locations tab, and add the location where the host resides.
- Click the Organizations tab, and add the organization that the host belongs to.
- Click Submit to save the changes.
-
In the Provisioning Templates page, enter
Kickstart default iPXE
into the search field and click Search. - Optional: If you want to change the template, click Clone, enter a unique name, and click Submit.
- Click the name of the template you want to use.
- If you clone the template, you can make changes you require on the Template tab.
- Click the Association tab, and associate the template with the operating system that your host uses.
- Click the Locations tab, and add the location where the host resides.
- Click the Organizations tab, and add the organization that the host belongs to.
- Click Submit to save the changes.
- Navigate to Hosts > Operating systems and select the operating system of your host.
- Click the Templates tab.
- From the PXELinux template list, select the template you want to use.
- From the iPXE template list, select the template you want to use.
- Click Submit to save the changes.
- Navigate to Hosts > All Hosts, and select the host you want to use.
- Select the Templates tab, and from the PXELinux template list, select Review to verify the template is the correct template.
- From the iPXE template list, select Review to verify the template is the correct template. If there is no PXELinux entry, or you cannot find the new template, navigate to Hosts > All Hosts, and on your host, click Edit. Click the Operating system tab and click the Provisioning Template Resolve button to refresh the list of templates.
To use the iPXE bootstrapping feature for Satellite, configure the
dhcpd.conf
file as follows:if exists user-class and option user-class = "iPXE" { filename "http://satellite.example.com/unattended/iPXE?bootstrap=1"; } elsif option architecture = 00:06 { filename "ipxe.efi"; } elsif option architecture = 00:07 { filename "ipxe.efi"; } elsif option architecture = 00:09 { filename "ipxe.efi"; } else { filename "undionly.0"; }
If you use an isolated network, use a Capsule Server URL with TCP port
8000
, instead of the URL of Satellite Server.NoteFor
http://satellite.example.com/unattended/iPXE
, you can also use a Red Hat Satellite Capsulehttp://capsule.example.com:8000/unattended/iPXE
. You must update the/etc/dhcp/dhcpd.conf
file after every upgrade.
5.4. Chainbooting Red Hat Satellite Capsule to use iPXE directly
You must perform this procedure on all Capsules.
Procedure
Install the
ipxe-bootimgs
RPM package:# yum install ipxe-bootimgs
Copy the iPXE firmware to the TFTP server’s root directory. Do not use symbolic links because TFTP runs in the
chroot
environment.For EFI systems, copy the
ipxe.efi
file:# cp /usr/share/ipxe/ipxe.lkrn /var/lib/tftpboot/
For BIOS systems, copy the
undionly.kpxe
file:# cp /usr/share/ipxe/undionly.kpxe /var/lib/tftpboot/undionly-ipxe.0
Correct the file contexts:
# restorecon -RvF /var/lib/tftpboot/
Chapter 6. Using PXE to Provision Hosts
There are four main ways to provision bare metal instances with Red Hat Satellite 6.8:
- Unattended Provisioning
- New hosts are identified by a MAC address and Satellite Server provisions the host using a PXE boot process.
- Unattended Provisioning with Discovery
- New hosts use PXE boot to load the Satellite Discovery service. This service identifies hardware information about the host and lists it as an available host to provision. For more information, see Chapter 7, Configuring the Discovery Service.
- PXE-less Provisioning
- New hosts are provisioned with a boot disk or PXE-less discovery image that Satellite Server generates.
- PXE-less Provisioning with Discovery
- New hosts use an ISO boot disk that loads the Satellite Discovery service. This service identifies hardware information about the host and lists it as an available host to provision. For more information, see Section 7.7, “Implementing PXE-less Discovery”.
BIOS and UEFI Support
With Red Hat Satellite, you can perform both BIOS and UEFI based PXE provisioning.
Both BIOS and UEFI interfaces work as interpreters between the computer’s operating system and firmware, initializing the hardware components and starting the operating system at boot time.
For information about supported workflows, see Supported architectures and provisioning scenarios.
In Satellite provisioning, the PXE loader option defines the DHCP filename
option to use during provisioning. For BIOS systems, use the PXELinux BIOS option to enable a provisioned node to download the pxelinux.0
file over TFTP. For UEFI systems, use the PXEGrub2 UEFI option to enable a TFTP client to download grub2/grubx64.efi
file.
For BIOS provisioning, you must associate a PXELinux template with the operating system.
For UEFI provisioning, you must associate a PXEGrub2 template with the operating system.
If you associate both PXELinux and PXEGrub2 templates, Satellite 6 can deploy configuration files for both on a TFTP server, so that you can switch between PXE loaders easily.
6.1. Prerequisites for Bare Metal Provisioning
The requirements for bare metal provisioning include:
A Capsule Server managing the network for bare metal hosts. For unattended provisioning and discovery-based provisioning, Satellite Server requires PXE server settings.
For more information about networking requirements, see Chapter 3, Configuring Networking.
For more information about the Discovery service, Chapter 7, Configuring the Discovery Service.
- A bare metal host or a blank VM.
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
For information about the security token for unattended and PXE-less provisioning, see Section 6.2, “Configuring the Security Token Validity Duration”.
6.2. Configuring the Security Token Validity Duration
When performing unattended and PXE-less provisioning, as a security measure, Satellite automatically generates a unique token and adds this token to the kickstart URL in the PXE configuration file (PXELinux, Grub2).
By default, the token is valid for 360 minutes. When you provision a host, ensure that you reboot the host within this time frame. If the token expires, it is no longer valid and you receive a 404 error and the operating system installer download fails.
To adjust the token’s duration of validity, in the Satellite web UI, navigate to Administer > Settings, and click the Provisioning tab. Find the Token duration option, and click the edit icon and edit the duration, or enter 0
to disable token generation.
If token generation is disabled, an attacker can spoof client IP address and download kickstart from Satellite Server, including the encrypted root password.
6.3. Creating Hosts with Unattended Provisioning
Unattended provisioning is the simplest form of host provisioning. You enter the host details on Satellite Server and boot your host. Satellite Server automatically manages the PXE configuration, organizes networking services, and provides the operating system and configuration for the host.
This method of provisioning hosts uses minimal interaction during the process.
Procedure
To create a host with unattended provisioning, complete the following steps:
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- Click the Organization and Location tabs and change the context to match your requirements.
- From the Host Group list, select a host group that you want to use to populate the form.
- Click the Interface tab, and on the host’s interface, click Edit.
Verify that the fields are populated with values. Note in particular:
- The Name from the Host tab becomes the DNS name.
- Satellite Server automatically assigns an IP address for the new host.
- In the MAC address field, enter a MAC address for the host. This ensures the identification of the host during the PXE boot process.
- Ensure that Satellite Server automatically selects the Managed, Primary, and Provision options for the first interface on the host. If not, select them.
- In the MAC address field, enter a MAC address of the host’s provisioning interface. This ensures the identification of the host during the PXE boot process.
- Click OK to save. To add another interface, click Add Interface. You can select only one interface for Provision and Primary.
- Click the Operating System tab, and verify that all fields contain values. Confirm each aspect of the operating system.
Optional: Click Resolve in Provisioning template to check the new host can identify the right provisioning templates to use.
For more information about associating provisioning templates, see Section 2.11, “Provisioning Templates”.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
Click Submit to save the host details.
For more information about network interfaces, see Adding network interfaces.
This creates the host entry and the relevant provisioning settings. This also includes creating the necessary directories and files for PXE booting the bare metal host. If you start the physical host and set its boot mode to PXE, the host detects the DHCP service of Satellite Server’s integrated Capsule, receives HTTP endpoint of the Kickstart tree and installs the operating system.
When the installation completes, the host also registers to Satellite Server using the activation key and installs the necessary configuration and management tools from the Satellite Tools 6.8 repository.
For CLI Users
Create the host with the hammer host create
command.
# hammer host create --name "My_Unattended_Host" --organization "My_Organization" \ --location "My_Location" --hostgroup "My_Host_Group" --mac "aa:aa:aa:aa:aa:aa" \ --build true --enabled true --managed true
Ensure the network interface options are set using the hammer host interface update
command.
# hammer host interface update --host "test1" --managed true \ --primary true --provision true
6.4. Creating Hosts with PXE-less Provisioning
Some hardware does not provide a PXE boot interface. In Satellite, you can provision a host without PXE boot. This is also known as PXE-less provisioning and involves generating a boot ISO that hosts can use. Using this ISO, the host can connect to Satellite Server, boot the installation media, and install the operating system.
Satellite also provides a PXE-less discovery service that operates without PXE-based services, such as DHCP and TFTP. For more information, see Section 7.7, “Implementing PXE-less Discovery”.
Boot ISO Types
There are four types of boot ISOs:
- Host image
- A boot ISO for the specific host. This image contains only the boot files that are necessary to access the installation media on Satellite Server. The user defines the subnet data in Satellite and the image is created with static networking.
- Full host image
- A boot ISO that contains the kernel and initial RAM disk image for the specific host. This image is useful if the host fails to chainload correctly. The provisioning template still downloads from Satellite Server.
- Generic image
-
A boot ISO that is not associated with a specific host. The ISO sends the host’s MAC address to Satellite Server, which matches it against the host entry. The image does not store IP address details, and requires access to a DHCP server on the network to bootstrap. This image is also available from the
/bootdisk/disks/generic
URL on your Satellite Server, for example,https://satellite.example.com/bootdisk/disks/generic
. - Subnet image
- A boot ISO that is similar to the generic image but is configured with the address of a Capsule Server. This image is generic to all hosts with a provisioning NIC on the same subnet.
Host image and Full host image contain provisioning tokens, therefore the generated image has limited lifespan. For more information about configuring security tokens, read Section 6.2, “Configuring the Security Token Validity Duration”.
The Full host image is based on SYSLINUX and works with all Red Hat Enterprise Linux certified hardware. When using a Host image, Generic image, or Subnet image, see http://ipxe.org/appnote/hardware_drivers for a list of hardware drivers expected to work with an iPXE-based boot disk.
Procedure
To create a host with PXE-less provisioning, complete the following steps:
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name that you want to become the provisioned system’s host name.
- Click the Organization and Location tabs and change the context to match your requirements.
- From the Host Group list, select a host group that you want to use to populate the form.
- Click the Interface tab, and on the host’s interface, click Edit.
Verify that the fields are populated with values. Note in particular:
- The Name from the Host tab becomes the DNS name.
- Satellite Server automatically assigns an IP address for the new host.
- In the MAC address field, enter a MAC address for the host.
- Ensure that Satellite Server automatically selects the Managed, Primary, and Provision options for the first interface on the host. If not, select them.
- Click the Operating System tab, and verify that all fields contain values. Confirm each aspect of the operating system.
Click Resolve in Provisioning template to check the new host can identify the right provisioning templates to use.
For more information about associating provisioning templates, see Section 2.11, “Provisioning Templates”.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save the host details.
This creates a host entry and the host details page appears.
The options on the upper-right of the window are the Boot disk menu. From this menu, one of the following images is available for download: Host image, Full host image, Generic image, and Subnet image.
For CLI Users
Create the host with the hammer host create
command.
# hammer host create --name "My_Bare_Metal" --organization "My_Organization" \ --location "My_Location" --hostgroup "My_Host_Group" --mac "aa:aa:aa:aa:aa:aa" \ --build true --enabled true --managed true
Ensure that your network interface options are set using the hammer host interface update
command.
# hammer host interface update --host "test3" --managed true \ --primary true --provision true
Download the boot disk from Satellite Server with the hammer bootdisk host
command:
For Host image:
# hammer bootdisk host --host test3.example.com
For Full host image:
# hammer bootdisk host --host test3.example.com --full true
For Generic image:
# hammer bootdisk generic
For Subnet image:
# hammer bootdisk subnet --subnet subnetName
This creates a boot ISO for your host to use.
Write the ISO to a USB storage device using the dd utility or livecd-tools if required.
When you start the physical host and boot from the ISO or the USB storage device, the host connects to Satellite Server and starts installing operating system from its kickstart tree.
When the installation completes, the host also registers to Satellite Server using the activation key and installs the necessary configuration and management tools from the Satellite Tools 6.8 repository.
6.5. Creating Hosts with UEFI HTTP Boot Provisioning
You can provision hosts from Satellite using the UEFI HTTP Boot. This is the only method with which you can provision hosts in IPv6 network.
Prerequisites
- Ensure that you meet the requirements for HTTP booting. For more information, see HTTP Booting Requirements in Planning for Satellite.
Procedure
On Capsule that you use for provisioning, update the
grub2-efi
package to the latest version:# satellite-maintain packages install grub2-efi
Enable
foreman-proxy-http
,foreman-proxy-httpboot
, andforeman-proxy-tftp
features.# satellite-installer --scenario satellite \ --foreman-proxy-httpboot true \ --foreman-proxy-http true \ --foreman-proxy-tftp true
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- Click the Organization and Location tabs and change the context to match your requirements.
- From the Host Group list, select a host group that you want to use to populate the form.
- Click the Interface tab, and on the host’s interface, click Edit.
Verify that the fields are populated with values. Note in particular:
- The Name from the Host tab becomes the DNS name.
- Satellite Server automatically assigns an IP address for the new host.
- In the MAC address field, enter a MAC address of the host’s provisioning interface. This ensures the identification of the host during the PXE boot process.
- Ensure that Satellite Server automatically selects the Managed, Primary, and Provision options for the first interface on the host. If not, select them.
- Click OK to save. To add another interface, click Add Interface. You can select only one interface for Provision and Primary.
- Click the Operating System tab, and verify that all fields contain values. Confirm each aspect of the operating system.
- From the PXE Loader list, select Grub2 UEFI HTTP.
Optional: Click Resolve in Provisioning template to check the new host can identify the right provisioning templates to use.
For more information about associating provisioning templates, see Section 2.13, “Creating Provisioning Templates”.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
Click Submit to save the host details.
For more information about network interfaces, see Adding network interfaces.
- Set the host to boot in UEFI mode from network.
- Start the host.
- From the boot menu, select Kickstart default PXEGrub2.
This creates the host entry and the relevant provisioning settings. This also includes creating the necessary directories and files for UEFI booting the bare metal host. When you start the physical host and set its boot mode to UEFI HTTP, the host detects the defined DHCP service, receives HTTP endpoint of Capsule with the Kickstart tree and installs the operating system.
When the installation completes, the host also registers to Satellite Server using the activation key and installs the necessary configuration and management tools from the Satellite Tools 6.8 repository.
For CLI Users
On Capsule that you use for provisioning, update the
grub2-efi
package to the latest version:# satellite-maintain packages install grub2-efi
Enable
foreman-proxy-http
,foreman-proxy-httpboot
, andforeman-proxy-tftp true
features.# satellite-installer --scenario satellite \ --foreman-proxy-httpboot true \ --foreman-proxy-http true \ --foreman-proxy-tftp true
Create the host with the
hammer host create
command.# hammer host create --name "My_Host" \ --organization "My_Organization" \ --location "My_Location" \ --hostgroup "My_Host_Group" \ --mac "aa:aa:aa:aa:aa:aa" \ --build true \ --enabled true \ --managed true \ --pxe-loader "Grub2 UEFI HTTP"
Ensure the network interface options are set using the
hammer host interface update
command.# hammer host interface update --host "My_Host" \ --managed true \ --primary true \ --provision true
- Set the host to boot in UEFI mode from network.
- Start the host.
- From the boot menu, select Kickstart default PXEGrub2.
This creates the host entry and the relevant provisioning settings. This also includes creating the necessary directories and files for UEFI booting the bare metal host. When you start the physical host and set its boot mode to UEFI HTTP, the host detects the defined DHCP service, receives HTTP endpoint of Capsule with the Kickstart tree and installs the operating system.
When the installation completes, the host also registers to Satellite Server using the activation key and installs the necessary configuration and management tools from the Satellite Tools 6.8 repository.
6.6. Deploying SSH Keys during Provisioning
Use this procedure to deploy SSH keys added to a user during provisioning. For information on adding SSH keys to a user, see Managing SSH Keys for a User in Administering Red Hat Satellite.
Procedure
To deploy SSH keys during provisioning, complete the following steps:
- In the Satellite web UI, navigate to Hosts > Provisioning Templates.
- Create a provisioning template, or clone and edit an existing template. For more information, see Section 2.13, “Creating Provisioning Templates”.
- In the template, click the Template tab.
In the Template editor field, add the
create_users
snippet to the%post
section:<%= snippet('create_users') %>
- Select the Default check box.
- Click the Association tab.
- From the Application Operating Systems list, select an operating system.
- Click Submit to save the provisioning template.
Create a host that is associated with the provisioning template or rebuild a host using the OS associated with the modified template. For more information, see Creating a Host in the Managing Hosts guide.
The SSH keys of the Owned by user are added automatically when the
create_users
snippet is executed during the provisioning process. You can set Owned by to an individual user or a user group. If you set Owned by to a user group, the SSH keys of all users in the user group are added automatically.
Chapter 7. Configuring the Discovery Service
Red Hat Satellite can detect hosts on a network that are not in your Satellite inventory. These hosts boot the discovery image that performs hardware detection and relays this information back to Satellite Server. This method creates a list of ready-to-provision hosts in Satellite Server without needing to enter the MAC address of each host.
When you boot a blank bare-metal host, the boot menu has two options: local
and discovery
. If you select discovery
to boot the Discovery image, after a few minutes, the Discovery image completes booting and a status screen is displayed.
The Discovery service is enabled by default on Satellite Server. However, the default setting of the global templates is to boot from the local hard drive. To change the default setting, in the Satellite web UI, navigate to Administer > Settings, and click the Provisioning tab. Locate the Default PXE global template entry row, and in the Value column, enter discovery.
To use Satellite Server to provide the Discovery image, install the following RPM packages:
-
tfm-rubygem-foreman_discovery
-
foreman-discovery-image
-
tfm-rubygem-smart_proxy_discovery
The tfm-rubygem-foreman_discovery
package contains the Satellite plug-in to handle discovered nodes, connections, and necessary database structures, and API.
The foreman-discovery-image
package installs the Discovery ISO to the /usr/share/foreman-discovery-image/
directory. You can build a PXE boot image from this ISO using the livecd-iso-to-pxeboot
tool. The tool saves this PXE boot image in the /var/lib/tftpboot/boot
directory. For more information, see Section 7.8, “Building a Discovery Image”.
The tfm-rubygem-smart_proxy_discovery
package configures Capsule Server, such as the integrated Capsule of Satellite Server, to act as a proxy for the Discovery service.
When the installation completes, you can view the new menu option by navigating to Hosts > Discovered Hosts.
7.1. Installing the Discovery Service
Complete the following procedure to enable the Discovery service on Capsule Server.
Procedure
Enter the following commands on Capsule Server:
# satellite-maintain packages install foreman-discovery-image tfm-rubygem-smart_proxy_discovery
Restart the satellite-maintain services:
# satellite-maintain service restart
- In the Satellite web UI, navigate to Infrastructure > Capsule.
- Click the Capsule Server and select Refresh from the Actions list. Locate Discovery in the list of features to confirm the Discovery service is now running.
Subnets
All subnets with discoverable hosts require an appropriate Capsule Server selected to provide the Discovery service.
To check this, navigate to Infrastructure > Capsules and verify if the Capsule Server that you want to use lists the Discovery feature. If not, click Refresh features.
In the Satellite web UI, navigate to Infrastructure > Subnets, select a subnet, click the Capsules tab, and select the Discovery Proxy that you want to use. Perform this for each subnet that you want to use.
7.2. The Provisioning Template PXELinux Discovery Snippet
For BIOS provisioning, the PXELinux global default
template in the Hosts > Provisioning Templates window contains the snippet pxelinux_discovery
. The snippet has the following lines:
LABEL discovery MENU LABEL Foreman Discovery Image KERNEL boot/fdi-image/vmlinuz0 APPEND initrd=boot/fdi-image/initrd0.img rootflags=loop root=live:/fdi.iso rootfstype=auto ro rd.live.image acpi=force rd.luks=0 rd.md=0 rd.dm=0 rd.lvm=0 rd.bootif=0 rd.neednet=0 nomodeset proxy.url=<%= foreman_server_url %> proxy.type=foreman IPAPPEND 2
The KERNEL
and APPEND
options boot the Discovery image and ramdisk. The APPEND
option contains a proxy.url
parameter, with the foreman_server_url
macro as its argument. This macro resolves to the full URL of Satellite Server.
For UEFI provisioning, the PXEgrub2 global default
template in the Hosts > Provisioning Templates window contains the snippet pxegrub2_discovery
:
menuentry 'Foreman Discovery Image' --id discovery { linuxefi boot/fdi-image/vmlinuz0 rootflags=loop root=live:/fdi.iso rootfstype=auto ro rd.live.image acpi=force rd.luks=0 rd.md=0 rd.dm=0 rd.lvm=0 rd.bootif=0 rd.neednet=0 nomodeset proxy.url=<%= foreman_server_url %> proxy.type=foreman BOOTIF=01-$mac initrdefi boot/fdi-image/initrd0.img }
To use Capsule to proxy the discovery steps, edit /var/lib/tftpboot/pxelinux.cfg/default
or /var/lib/tftpboot/grub2/grub.cfg
and change the URL to the Capsule Server FQDN you want to use.
The global template is available on Satellite Server and all Capsules that have the TFTP feature enabled.
7.3. Automatic Contexts for Discovered Hosts
Satellite Server assigns an organization and location to discovered hosts according to the following sequence of rules:
- If a discovered host uses a subnet defined in Satellite, the host uses the first organization and location associated with the subnet.
-
If the
discovery_organization
ordiscovery_location
fact values are set, the discovered host uses these fact values as an organization and location. To set these fact values, navigate to Administer > Settings > Discovered, and add these facts to the Default organization and Default location fields. Ensure that the discovered host’s subnet also belongs to the organization and location set by the fact, otherwise Satellite refuses to set it for security reasons. - If none of the previous conditions exists, Satellite assigns the first Organization and Location ordered by name.
You can change the organization or location using the bulk actions menu of the Discovered hosts page. Select the discovered hosts to modify and select Assign Organization or Assign Location from the Select Action menu.
Note that the foreman_organization
and foreman_location
facts are no longer valid values for assigning context for discovered hosts. You still can use these facts to configure the host for Puppet runs. To do this, navigate to Administer > Settings > Puppet section and add the foreman_organization
and foreman_location
facts to the Default organization and Default location fields.
7.4. Discovery Templates and Snippets Settings
To use the Discovery service, you must configure provisioning settings to set Discovery as the default service and set the templates that you want to use.
Setting Discovery Service as Default
For both BIOS and UEFI, to set the Discovery service as the default service that boots for hosts that are not present in your current Satellite inventory, complete the following steps:
- In the Satellite web UI, navigate to Administer > Settings and click the Provisioning tab.
-
For the Default PXE global template entry, in the Value column, enter
discovery
.
To use a template, in the Satellite web UI, navigate to Administer > Settings and click the Provisioning tab and set the templates that you want to use.
Customizing Templates and Snippets
Templates and snippets are locked to prevent changes. If you want to edit a template or snippet, clone it, save it with a unique name, and then edit the clone.
When you change the template or a snippet it includes, the changes must be propagated to Satellite Server’s default PXE template.
In the Satellite web UI, navigate to Hosts > Provisioning Templates and click Build PXE Default.
This refreshes the default PXE template on Satellite Server.
Additional Settings
- The proxy.url argument
-
During the Satellite installation process, if you use the default option
--enable-foreman-plugin-discovery
, you can edit theproxy.url
argument in the template to set the URL of Capsule Server that provides the discovery service. You can change theproxy.url
argument to the IP address or FQDN of another provisioning Capsule that you want to use, but ensure that you append the port number, for example,9090
. If you use an alternative port number with the--foreman-proxy-ssl-port
option during Satellite installation, you must add that port number. You can also edit theproxy.url
argument to use a Satellite IP address or FQDN so that the discovered hosts communicate directly with Satellite Server. - The proxy.type argument
If you use a Capsule Server FQDN for the
proxy.url
argument, ensure that you set theproxy.type
argument toproxy
. If you use a Satellite FQDN, update theproxy.type
argument toforeman
.proxy.url=https://capsule.example.com:9090 proxy.type=proxy
Rendering the Capsule's Host Name
Satellite 6 deploys the same template to all TFTP Capsules and there is no variable or macro available to render the Capsule’s host name. The hard-coded proxy.url
does not not work with two or more TFTP Capsules. As a workaround, every time you click Build PXE Defaults, edit the configuration file in the TFTP directory using SSH, or use a common DNS alias for appropriate subnets.
Tagged VLAN Provisioning
If you want to use tagged VLAN provisioning, and you want the discovery service to send a discovery request, add the following information to the KERNEL
option in the discovery template:
fdi.vlan.primary=example_VLAN_ID
7.5. Creating Hosts from Discovered Hosts
Provisioning discovered hosts follows a provisioning process that is similar to PXE provisioning. The main difference is that instead of manually entering the host’s MAC address, you can select the host to provision from the list of discovered hosts.
Prerequisites
- Configure a domain and subnet on Satellite. For more information about networking requirements, see Chapter 3, Configuring Networking.
- Configure the discovery service on Satellite. For more information, see Section 7.1, “Installing the Discovery Service”.
- A bare metal host or a blank VM.
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
For information about the security token for unattended and PXE-less provisioning, see Section 6.2, “Configuring the Security Token Validity Duration”.
Procedure
To create a host from a discovered host, complete the following steps:
- In the Satellite web UI, navigate to Hosts > Discovered host. Select the host you want to use and click Provision to the right of the list.
Select from one of the two following options:
- To provision a host from a host group, select a host group, organization, and location, and then click Create Host.
- To provision a host with further customization, click Customize Host and enter the additional details you want to specify for the new host.
Verify that the fields are populated with values. Note in particular:
- The Name from the Host tab becomes the DNS name.
- Satellite Server automatically assigns an IP address for the new host.
- Satellite Server automatically populates the MAC address from the Discovery results.
- Ensure that Satellite Server automatically selects the Managed, Primary, and Provision options for the first interface on the host. If not, select them.
- Click the Operating System tab, and verify that all fields contain values. Confirm each aspect of the operating system.
Click Resolve in Provisioning template to check the new host can identify the right provisioning templates to use. The host must resolve to the following provisioning templates:
-
kexec Template:
Discovery Red Hat kexec
provision Template:
Satellite Kickstart Default
For more information about associating provisioning templates, see Section 2.11, “Provisioning Templates”.
-
kexec Template:
- Click Submit to save the host details.
When the host provisioning is complete, the discovered host becomes a content host. To view the host, navigate to Hosts > Content Hosts.
For CLI Users
Identify the discovered host to use for provisioning:
# hammer discovery list
Select a host and provision it using a host group. Set a new host name with the
--new-name
option:# hammer discovery provision --name "host_name" \ --new-name "new_host_name" --organization "My_Organization" \ --location "My_Location" --hostgroup "My_Host_Group" --build true \ --enabled true --managed true
This removes the host from the discovered host listing and creates a host entry with the provisioning settings. The Discovery image automatically resets the host so that it can boot to PXE. The host detects the DHCP service on Satellite Server’s integrated Capsule and starts installing the operating system. The rest of the process is identical to normal PXE workflow described in Section 6.3, “Creating Hosts with Unattended Provisioning”.
7.6. Creating Discovery Rules
As a method of automating the provisioning process for discovered hosts, Satellite provides a feature to create discovery rules. These rules define how discovered hosts automatically provision themselves, based on the assigned host group. For example, you can automatically provision hosts with a high CPU count as hypervisors. Likewise, you can provision hosts with large hard disks as storage servers.
NIC Considerations
Auto provisioning does not currently allow configuring NICs; all systems are being provisioned with the NIC configuration that was detected during discovery. However, you can set the NIC in the kickstart
scriplet, using a script, or using configuration management at a later stage.
Procedure
To create a rule, complete the following steps:
- In the Satellite web UI, navigate to Configure > Discovery rules, and select Create Rule.
- In the Name field, enter a name for the rule.
-
In the Search field, enter the rules to determine whether to provision a host. This field provides suggestions for values you enter and allows operators for multiple rules. For example:
cpu_count > 8
. - From the Host Group list, select the host group to use as a template for this host.
In the Hostname field, enter the pattern to determine host names for multiple hosts. This uses the same ERB syntax that provisioning templates use. The host name can use the
@host
attribute for host-specific values and therand
function for a random number. For more information about provisioning templates, see Section 2.11, “Provisioning Templates”.-
myhost-<%= rand(99999) %>
-
abc-<%= @host.facts['bios_vendor'] %>-<%= rand(99999) %>
-
xyz-<%= @host.hostgroup.name %>
-
srv-<%= @host.discovery_rule.name %>
server-<%= @host.ip.gsub('.','-') + '-' + @host.hostgroup.subnet.name %>
When creating host name patterns, ensure that the resulting host names are unique, do not start with numbers, and do not contain underscores or dots. A good approach is to use unique information provided by Facter, such as the MAC address, BIOS, or serial ID.
-
-
In the Hosts limit field, enter the maximum number of hosts that you can provision with the rule. Enter
0
for unlimited. - In the Priority field, enter a number to set the precedence the rule has over other rules. Rules with lower values have a higher priority.
- From the Enabled list, select whether you want to enable the rule.
- To set a different provisioning context for the rule, click the Organizations and Locations tabs and select the contexts you want to use.
- Click Submit to save your rule.
Navigate to Hosts > Discovered Host and select one of the following two options:
- From the Discovered hosts list on the right, select Auto-Provision to automatically provisions a single host.
- On the upper right of the window, click Auto-Provision All to automatically provisions all hosts.
For CLI Users
Create the rule with the hammer discovery-rule create
command:
# hammer discovery-rule create --name "Hypervisor" \
--search "cpu_count > 8" --hostgroup "My_Host_Group" \
--hostname "hypervisor-<%= rand(99999) %>" \
--hosts-limit 5 --priority 5 --enabled true
Automatically provision a host with the hammer discovery auto-provision
command:
# hammer discovery auto-provision --name "macabcdef123456"
7.7. Implementing PXE-less Discovery
Satellite provides a PXE-less Discovery service that operates without the need for PXE-based services (DHCP and TFTP). You accomplish this using Satellite Server’s Discovery image. Once a discovered node is scheduled for installation, it uses kexec
command to reload Linux kernel with OS installer without rebooting the node.
Discovery kexec
is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process. For more information about the support scope of Red Hat Technology Preview features, see https://access.redhat.com/support/offerings/techpreview/.
Known Issues
The console might freeze during the process. On some hardware, you might experience graphical hardware problems.
If you have not yet installed the Discovery service or image, see Section 7.8, “Building a Discovery Image”.
The ISO for the Discovery service resides at /usr/share/foreman-discovery-image/
and is installed using the foreman-discovery-image
package.
Attended Use
Copy this media to either a CD, DVD, or a USB stick. For example, to copy to a USB stick at
/dev/sdb
:# dd bs=4M \ if=/usr/share/foreman-discovery-image/foreman-discovery-image-3.4.4-5.iso \ of=/dev/sdb
Insert the Discovery boot media into a bare metal host, start the host, and boot from the media. The Discovery Image displays an option for either Manual network setup or Discovery with DHCP:
If you select Manual network setup, the Discovery image requests a set of network options. This includes the primary network interface that connects to Satellite Server. This Discovery image also asks for network interface configuration options, such as an IPv4 Address, IPv4 Gateway, and an IPv4 DNS server.
- After entering these details, select Next.
- If you select Discovery with DHCP, the Discovery image requests only the primary network interface that connects to Satellite Server. It attempts to automatically configure the network interface using a DHCP server, such as one that a Capsule Server provides.
After the primary interface configuration, the Discovery image requests the Server URL, which is the URL of Satellite Server or Capsule Server offering the Discovery service. For example, to use the integrated Capsule on Satellite Server, use the following URL:
https://satellite.example.com:9090
-
Set the Connection type to
Proxy
, then select Next. - Optional: The Discovery image also provides a set of fields to input Custom facts for the Facter tool to relay back to Satellite Server. These are entered in a name-value format. Provide any custom facts you require and select Confirm to continue.
Satellite reports a successful communication with Satellite Server’s Discovery service. Navigate to Hosts > Discovered Hosts and view the newly discovered host.
For more information about provisioning discovered hosts, see Section 7.5, “Creating Hosts from Discovered Hosts”.
7.8. Building a Discovery Image
The Discovery image is a minimal operating system that is PXE-booted on hosts to acquire initial hardware information and to check in with Satellite. Discovered hosts keep running the Discovery image until they are rebooted into Anaconda, which then initiates the provisioning process.
The operating system image is based on Red Hat Enterprise Linux 7.
The foreman-discovery-image
package contains this image. You must install the package on the Capsule that provides TFTP services.
Use this procedure to build a Satellite discovery image or rebuild an image if you change configuration files.
Do not use this procedure on your production Satellite or Capsule. Use either a dedicated environment or copy the synchronized repositories and a kickstart file to a separate server.
Prerequisites
Install the
livecd-tools
package:# satellite-maintain packages install livecd-tools
For the following Red Hat Enterprise Linux 7 repositories required to build the Discovery image, change the download policy to Immediate. This is required because Satellite downloads all packages only during synchronization of repositories with the immediate download policy.
- The latest Red Hat Enterprise Linux 7 Server (Kickstart) repository. For example, Red Hat Enterprise Linux 7 Server Kickstart x86_64 7.7.
- Red Hat Satellite Capsule 6.8 for RHEL 7 Server RPMs x86_64.
For more information about changing download policies, see Changing the Download Policy for a Repository in the Content Management Guide.
Synchronize the following Red Hat Enterprise Linux 7 repositories required to build the Discovery image:
- The latest Red Hat Enterprise Linux 7 Server (Kickstart) repository. For example, Red Hat Enterprise Linux 7 Server Kickstart x86_64 7.7.
- Red Hat Satellite Capsule 6.8 for RHEL 7 Server RPMs x86_64.
For more information about synchronizing repositories, see Synchronizing Red Hat Repositories in the Content Management Guide.
Procedure
To build the Satellite discovery image, complete the following steps:
Open the
/usr/share/foreman-discovery-image/foreman-discovery-image.ks
file for editing:# vim /usr/share/foreman-discovery-image/foreman-discovery-image.ks
Replace the
repo
lines in the kickstart file with the repository URLs:repo --name=rhel --baseurl=file:///var/lib/pulp/published/yum/https/repos/Default_Organization/Library/content/dist/rhel/server/7/7.7/x86_64 repo --name=sat --baseurl=file:///var/lib/pulp/published/yum/https/repos/Default_Organization/Library/content/dist/rhel/server/7/7Server/x86_64/sat-capsule/6.8/os
Run the
livecd-creator
tool:# livecd-creator --title="Discovery-Image" \ --compression-type=xz \ --cache=var/cache/build-fdi \ --config /usr/share/foreman-discovery-image/foreman-discovery-image.ks \ --fslabel fdi \ --tmpdir /var/tmp
If you change
fdi
in the--fslabel
option, you must also change the root label on the kernel command line when loading the image.fdi
or the alternative name is appended to the.iso
file that is created as part of this procedure. The PXE Discovery tool uses this name when converting from.iso
to PXE.Use
/var/tmp
because this process requires close to 3GB of space and/tmp
might have problems if the system is low on swap space.Verify that your
fdi.iso
file is created:# ls *.iso -h
When you create the .iso
file, you can boot the .iso
file over a network or locally. Complete one of the following procedures.
To boot the iso file over a network:
To extract the initial ramdisk and kernel files from the
.iso
file over a network, enter the following command:# discovery-iso-to-pxe fdi.iso
Create a directory to store your boot files:
# mkdir /var/lib/tftpboot/boot/myimage
-
Copy the
initrd0.img
andvmlinuz0
files to your new directory. -
Edit the
KERNEL
andAPPEND
entries in the/var/lib/tftpboot/pxelinux.cfg
file to add the information about your own initial ramdisk and kernel files.
To boot the iso file locally:
If you want to create a hybrid .iso
file for booting locally, complete the following steps:
To convert the
.iso
file to an.iso
hybrid file for PXE provisioning, enter the following command:# isohybrid --partok fdi.iso
If you have
grub2
packages installed, you can also use the following command to install agrub2
bootloader:# isohybrid --partok --uefi fdi.iso
To add
md5
checksum to the.iso
file so it can pass installation media validation tests in Satellite, enter the following command:# implantisomd5 fdi.iso
7.9. Unattended Use, Customization, and Image Remastering
You can create a customized Discovery ISO to automate the image configuration process after booting. The Discovery image uses a Linux kernel for the operating system, which passes kernel parameters to configure the discovery service. These kernel parameters include the following entries:
- proxy.url
- The URL of the Capsule Server or Satellite Server providing the Discovery service.
- proxy.type
-
The proxy type. This is usually set to
proxy
to connect to Capsule Server. This parameter also supports a legacyforeman
option, where communication goes directly to Satellite Server instead of a Capsule Server. - fdi.pxmac
-
The MAC address of the primary interface in the format of
AA:BB:CC:DD:EE:FF
. This is the interface you aim to use for communicating with Capsule Server. In automated mode, the first NIC (using network identifiers in alphabetical order) with a link is used. In semi-automated mode, a screen appears and requests you to select the correct interface. - fdi.pxip, fdi.pxgw, fdi.pxdns
-
Manually configures IP address (
fdi.pxip
), the gateway (fdi.pxgw
), and the DNS (fdi.pxdns
) for the primary network interface. If your omit these parameters, the image uses DHCP to configure the network interface. - fdi.pxfactname1, fdi.pxfactname2 … fdi.pxfactnameN
- Use to specify custom fact names.
- fdi.pxfactvalue1, fdi.pxfactvalue2 … fdi.pxfactvalueN
-
The values for each custom fact. Each value corresponds to a fact name. For example,
fdi.pxfactvalue1
sets the value for the fact named withfdi.pxfactname1
. - fdi.pxauto
- To set automatic or semi-automatic mode. If set to 0, the image uses semi-automatic mode, which allows you to confirm your choices through a set of dialog options. If set to 1, the image uses automatic mode and proceeds without any confirmation.
- fdi.initnet
-
By default, the image initializes all network interfaces (value
all
). When this setting is set tobootif
, only the network interface it was network-booted from will be initialized. - fdi.rootpw
-
By default, the
root
account is locked. Use this option to set a root password. You can enter both clear and encrypted passwords. - fdi.ssh
-
By default, the SSH service is disabled. Set this to
1
ortrue
to enable SSH access. - fdi.ipv4.method
-
By default, NetworkManager IPv4 method setting is set to
auto
. This option overrides it, set it toignore
to disable the IPv4 stack. This option works only in DHCP mode. - fdi.ipv6.method
-
By default, NetworkManager IPv6 method setting is set to
auto
. This option overrides it, set it toignore
to disable the IPv6 stack. This option only works in DHCP mode.
Using the discovery-remaster
Tool to Remaster an OS Image
Satellite Server provides the discovery-remaster
tool in the foreman-discovery-image
package. This tool remasters the image to include these kernel parameters. To remaster the image, run the discovery-remaster
tool. For example:
# discovery-remaster ~/iso/foreman-discovery-image-3.4.4-5.iso \ "fdi.pxip=192.168.140.20/24 fdi.pxgw=192.168.140.1 \ fdi.pxdns=192.168.140.2 proxy.url=https://satellite.example.com:9090 \ proxy.type=proxy fdi.pxfactname1=customhostname fdi.pxfactvalue1=myhost fdi.pxmac=52:54:00:be:8e:8c fdi.pxauto=1"
Copy this media to either a CD, DVD, or a USB stick. For example, to copy to a USB stick at /dev/sdb
:
# dd bs=4M \ if=/usr/share/foreman-discovery-image/foreman-discovery-image-3.4.4-5.iso \ of=/dev/sdb
Insert the Discovery boot media into a bare metal host, start the host, and boot from the media.
For more information about provisioning discovered hosts, see Section 7.5, “Creating Hosts from Discovered Hosts”.
7.10. Extending the Discovery Image
You can extend the Satellite Discovery image with custom facts, software, or device drivers. You can also provide a compressed archive file containing extra code for the image to use.
Procedure
Create the following directory structure:
. ├── autostart.d │ └── 01_zip.sh ├── bin │ └── ntpdate ├── facts │ └── test.rb └── lib ├── libcrypto.so.1.0.0 └── ruby └── test.rb
-
The
autostart.d
directory contains scripts that are executed in POSIX order by the image when it starts, but before the host is registered to Satellite. -
The
bin
directory is added to the$PATH
variable; you can place binary files in this directory and use them in theautostart
scripts. -
The
facts
directory is added to theFACTERLIB
variable so that custom facts can be configured and sent to Satellite. -
The
lib
directory is added to theLD_LIBRARY_PATH
variable andlib/ruby
is added to theRUBYLIB
variable, so that binary files in/bin
can be executed correctly.
-
The
After creating the directory structure, create a
.zip
file archive with the following command:zip -r my_extension.zip .
To inform the Discovery image of the extensions it must use, place your zip files on your TFTP server with the Discovery image, and then update the
APPEND
line of the PXELinux template with thefdi.zips
option where the paths are relative to the TFTP root. For example, if you have two archives at$TFTP/zip1.zip
and$TFTP/boot/zip2.zip
, use the following syntax:fdi.zips=zip1.zip,boot/zip2.zip
You can append new directives and options to the existing environment variables (PATH
, LD_LIBRARY_PATH
, RUBYLIB
and FACTERLIB
). If you want to specify the path explicitly in your scripts, the .zip
file contents are extracted to the /opt/extension
directory on the image.
You can create multiple .zip
files but be aware that they are extracted to the same location on the Discovery image. Files extracted from in later .zip
files overwrite earlier versions if they have the same file name.
7.11. Troubleshooting Discovery
If a machine is not listed in the Satellite web UI in Hosts > Discovered Hosts, inspect the following configuration areas to help isolate the error:
- Navigate to Hosts > Provisioning Templates and redeploy the default PXELinux template using the Build PXE Default button.
-
Verify the
pxelinux.cfg/default
configuration file on the TFTP Capsule. - Ensure adequate network connectivity between hosts, Capsule Server, and Satellite Server.
-
Check the PXELinux template in use and determine the PXE discovery snippet it includes. Snippets are named as follows:
pxelinux_discovery
,pxegrub_discovery
, orpxegrub2_discovery
. Verify theproxy.url
andproxy.type
options in the PXE discovery snippet. -
Ensure that DNS is working correctly for the discovered nodes, or use an IP address in the
proxy.url
option in the PXE discovery snippet included in the PXELinux template you are using. - Ensure that the DHCP server is delivering IP addresses to the booted image correctly.
- Ensure the discovered host or virtual machine has at least 1200 MB of memory. Less memory can lead to various random kernel panic errors because the image is extracted in-memory.
For gathering important system facts, use the discovery-debug
command. It prints out system logs, network configuration, list of facts, and other information on the standard output. The typical use case is to redirect this output and copy it with the scp
command for further investigation.
The first virtual console on the discovered host is reserved for systemd logs. Particularly useful system logs are tagged as follows:
-
discover-host
— initial facts upload -
foreman-discovery
— facts refresh, reboot remote commands -
nm-prepare
— boot script which pre-configures NetworkManager -
NetworkManager
— networking information
Use TTY2 or higher to log in to a discovered host. The root account and SSH access are disabled by default, but you can enable SSH and set the root password using the following kernel command-line options in the Default PXELinux template on the APPEND line:
fdi.ssh=1 fdi.rootpw=My_Password
Chapter 8. Using a Red Hat Image Builder Image for Provisioning
In Satellite, you can integrate with Red Hat web console to perform actions and monitor your hosts. Using Red Hat web console, you can access Red Hat Image Builder and build images that you can then upload to Satellite and use this image to provision hosts.
For more information about integrating Red Hat web console with Satellite, see Host Management and Monitoring Using Red Hat web console in the Managing Hosts guide.
Prerequisites
-
Use
scp
orrsync
to copy the image using SSH to the base operating system of Satellite. - On Satellite, create a custom product, add a custom file repository to this product, and upload the image to the repository. For more information, see Importing Individual ISO Images and Files in the Content Management Guide.
Procedure
To use the Red Hat Image Builder image with Anaconda Kickstart in Satellite, complete the following steps:
- In the Satellite web UI, navigate to Configure > Host Groups, and select the host group that you want to use.
- Click the Parameters tab, and then click Add Parameter.
-
In the Name field, enter
kickstart_liveimg
. - From the Type list, select string.
-
In the Value field, enter the absolute path or a relative path in the following format
custom/product/repository/image_name
that points to the exact location where you store the image. - Click Submit to save your changes.
You can use this image for bare metal provisioning and provisioning using a compute resource.
For more information about bare metal provisioning, see Chapter 6, Using PXE to Provision Hosts. For more information about provisioning with different compute resources, see the relevant chapter for the compute resource that you want to use.
Chapter 9. Provisioning Virtual Machines on KVM (libvirt)
Kernel-based Virtual Machines (KVMs) use an open source virtualization daemon and API called libvirt
running on Red Hat Enterprise Linux. Red Hat Satellite can connect to the libvirt
API on a KVM server, provision hosts on the hypervisor, and control certain virtualization functions.
You can use KVM provisioning to create hosts over a network connection or from an existing image.
Prerequisites
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
- A Capsule Server managing a network on the KVM server. Ensure no other DHCP services run on this network to avoid conflicts with the Capsule Server. For more information about network service configuration for Capsule Servers, see Chapter 3, Configuring Networking.
- A Red Hat Enterprise Linux server running KVM virtualization tools (libvirt daemon). For more information, see the Red Hat Enterprise Linux 7 Virtualization Getting Started Guide.
-
An existing virtual machine image if you want to use image-based provisioning. Ensure that this image exists in a storage pool on the KVM host. The
default
storage pool is usually located in/var/lib/libvirt/images
. Only directory pool storage types can be managed through Satellite. Optional: The examples in these procedures use the root user for KVM. If you want to use a non-root user on the KVM server, you must add the user to the
libvirt
group on the KVM server:useradd -a -G libvirt non_root_user
A Satellite user account with the following roles:
- Edit hosts
View hosts
For more information, see Assigning Roles to a User in the Administering Red Hat Satellite guide.
A custom role in Satellite with the following permissions:
- view_compute_resources
- destroy_compute_resources_vms
- power_compute_resources_vms
- create_compute_resources_vms
- view_compute_resources_vms
- view_locations
view_subnets
For more information about creating roles, see Creating a Role in the Administering Red Hat Satellite guide. For more information about adding permissions to a role, see Adding Permissions to a Role in the Administering Red Hat Satellite guide.
Procedure Overview
- Section 9.1, “Configuring Satellite Server for KVM Connections”.
- Section 9.2, “Adding a KVM Connection to Satellite Server”.
- Optional: Section 9.3, “Adding KVM Images to Satellite Server”. Use this procedure if you want to use image-based provisioning.
- Section 9.4, “Adding KVM Details to a Compute Profile”.
- Section 9.5, “Creating Hosts on KVM”.
9.1. Configuring Satellite Server for KVM Connections
Before adding the KVM connection, create an SSH key pair for the foreman
user to ensure a secure connection between Satellite Server and KVM.
Procedure
On Satellite Server, switch to the
foreman
user:# su foreman -s /bin/bash
Generate the key pair:
$ ssh-keygen
Copy the public key to the KVM server:
$ ssh-copy-id root@kvm.example.com
Exit the bash shell for the
foreman
user:$ exit
Install the
libvirt-client
package:# satellite-maintain packages install libvirt-client
Use the following command to test the connection to the KVM server:
# su foreman -s /bin/bash -c 'virsh -c qemu+ssh://root@kvm.example.com/system list'
9.2. Adding a KVM Connection to Satellite Server
Use this procedure to add KVM as a compute resource in Satellite.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click Create Compute Resource.
- In the Name field, enter a name for the new compute resource.
- From the Provider list, select Libvirt.
- In the Description field, enter a description for the compute resource.
In the URL field, enter the connection URL to the KVM server. For example:
qemu+ssh://root@kvm.example.com/system
- From the Display type list, select either VNC or Spice.
Optional: To secure console access for new hosts with a randomly generated password, select the Set a randomly generated password on the display connection check box. You can retrieve the password for the VNC console to access the guest virtual machine console from the output of the following command executed on the KVM server:
# virsh edit your_VM_name <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0' passwd='your_randomly_generated_password'>
The password is randomly generated every time the console for the virtual machine is opened, for example, with virt-manager.
- Click Test Connection to ensure that Satellite Server connects to the KVM server without fault.
- Verify that the Locations and Organizations tabs are automatically set to your current context. If you want, add additional contexts to these tabs.
- Click Submit to save the KVM connection.
For CLI Users
To create a compute resource, enter the
hammer compute-resource create
command:# hammer compute-resource create --name "My_KVM_Server" \ --provider "Libvirt" --description "KVM server at kvm.example.com" \ --url "qemu+ssh://root@kvm.example.com/system" --locations "New York" \ --organizations "My_Organization"
9.3. Adding KVM Images to Satellite Server
To create hosts using image-based provisioning, you must add information about the image, such as access details and the image location, to your Satellite Server.
Note that you can manage only directory pool storage types through Satellite 6.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click the name of the KVM connection.
- Click Create Image.
- In the Name field, enter a name for the image.
- From the Operating System list, select the image’s base operating system.
- From the Architecture list, select the operating system architecture.
-
In the Username field, enter the SSH user name for image access. This is normally the
root
user. - In the Password field, enter the SSH password for image access.
In the Image path field, enter the full path that points to the image on the KVM server. For example:
/var/lib/libvirt/images/TestImage.qcow2
-
Optional: Select the User Data check box if the image supports user data input, such as
cloud-init
data. - Click Submit to save the image details.
For CLI Users
Create the image with the
hammer compute-resource image create
command. Use the--uuid
field to store the full path of the image location on the KVM server.# hammer compute-resource image create \ --name "KVM Image" \ --compute-resource "My_KVM_Server" --operatingsystem "RedHat version" \ --architecture "x86_64" \ --username root \ --user-data false \ --uuid "/var/lib/libvirt/images/KVMimage.qcow2" \
9.4. Adding KVM Details to a Compute Profile
Use this procedure to add KVM hardware settings to a compute profile. When you create a host on KVM using this compute profile, these settings are automatically populated.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles.
- In the Compute Profiles window, click the name of an existing compute profile, or click Create Compute Profile, enter a Name, and click Submit.
- Click the name of the KVM compute resource.
- In the CPUs field, enter the number of CPUs to allocate to the new host.
- In the Memory field, enter the amount of memory to allocate to the new host.
- From the Image list, select the image to use if performing image-based provisioning.
- From the Network Interfaces list, select the network parameters for the host’s network interface. You can create multiple network interfaces. However, at least one interface must point to a Capsule-managed network.
- In the Storage area, enter the storage parameters for the host. You can create multiple volumes for the host.
- Click Submit to save the settings to the compute profile.
For CLI Users
To create a compute profile, enter the following command:
# hammer compute-profile create --name "Libvirt CP"
To add the values for the compute profile, enter the following command:
# hammer compute-profile values create --compute-profile "Libvirt CP" \ --compute-resource "My_KVM_Server" \ --interface "compute_type=network,compute_model=virtio,compute_network=examplenetwork" \ --volume "pool_name=default,capacity=20G,format_type=qcow2" \ --compute-attributes "cpus=1,memory=1073741824"
9.5. Creating Hosts on KVM
In Satellite, you can use KVM provisioning to create hosts over a network connection or from an existing image:
- If you want to create a host over a network connection, the new host must be able to access either the Satellite Server’s integrated Capsule or an external Capsule Server on a KVM virtual network, so that the host has access to PXE provisioning services. This new host entry triggers the KVM server to create and start a virtual machine. If the virtual machine detects the defined Capsule Server through the virtual network, the virtual machine boots to PXE and begins to install the chosen operating system.
- If you want to create a host with an existing image, the new host entry triggers the KVM server to create the virtual machine using a pre-existing image as a basis for the new volume.
DHCP Conflicts
For network-based provisioning, if you use a virtual network on the KVM server for provisioning, select a network that does not provide DHCP assignments. This causes DHCP conflicts with Satellite Server when booting new hosts.
Procedure
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- Click the Organization and Location tabs to ensure that the provisioning context is automatically set to the current context.
- From the Host Group list, select the host group that you want to use to populate the form.
- From the Deploy on list, select the KVM connection.
- From the Compute Profile list, select a profile to use to automatically populate virtual machine settings.
- Click the Interface tab and click Edit on the host’s interface.
Verify that the fields are automatically populated, particularly the following items:
- The Name from the Host tab becomes the DNS name.
- Satellite Server automatically assigns an IP address for the new host.
- The MAC address field is blank. The KVM server assigns a MAC address to the host.
- The Managed, Primary, and Provision options are automatically selected for the first interface on the host. If not, select them.
- The KVM-specific fields are populated with settings from your compute profile. Modify these settings if required.
- Click the Operating System tab, and confirm that all fields automatically contain values.
Select the Provisioning Method that you want to use:
- For network-based provisioning, click Network Based.
- For image-based provisioning, click Image Based.
- Click Resolve in Provisioning templates to check the new host can identify the right provisioning templates to use.
- Click the Virtual Machine tab and confirm that these settings are populated with details from the host group and compute profile. Modify these settings to suit your needs.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save the host entry.
For CLI Users
To use network-based provisioning, create the host with the
hammer host create
command and include--provision-method build
. Replace the values in the following example with the appropriate values for your environment.# hammer host create \ --name "kvm-host1" \ --organization "My_Organization" \ --location "New York" \ --hostgroup "Base" \ --compute-resource "My_KVM_Server" \ --provision-method build \ --build true \ --enabled true \ --managed true \ --interface "managed=true,primary=true,provision=true,compute_type=network,compute_network=examplenetwork" \ --compute-attributes="cpus=1,memory=1073741824" \ --volume="pool_name=default,capacity=20G,format_type=qcow2" \ --root-password "password"
To use image-based provisioning, create the host with the
hammer host create
command and include--provision-method image
. Replace the values in the following example with the appropriate values for your environment.# hammer host create \ --name "kvm-host2" \ --organization "My_Organization" \ --location "New York" \ --hostgroup "Base" \ --compute-resource "My_KVM_Server" \ --provision-method image \ --image "KVM Image" \ --enabled true \ --managed true \ --interface "managed=true,primary=true,provision=true,compute_type=network,compute_network=examplenetwork" \ --compute-attributes="cpus=1,memory=1073741824" \ --volume="pool_name=default,capacity=20G,format_type=qcow2"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
Chapter 10. Provisioning Virtual Machines on Red Hat Virtualization
Red Hat Virtualization is an enterprise-grade server and desktop virtualization platform. In Red Hat Satellite, you can manage virtualization functions through Red Hat Virtualization’s REST API. This includes creating virtual machines and controlling their power states.
You can use Red Hat Virtualization provisioning to create virtual machines over a network connection or from an existing image.
You can use cloud-init
to configure the virtual machines that you provision. Using cloud-init
avoids any special configuration on the network, such as a managed DHCP and TFTP, to finish the installation of the virtual machine. This method does not require Satellite to connect to the provisioned virtual machine using SSH to run the finish script.
Prerequisites
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
- A Capsule Server managing a logical network on the Red Hat Virtualization environment. Ensure no other DHCP services run on this network to avoid conflicts with the Capsule Server. For more information, see Chapter 3, Configuring Networking.
-
An existing template, other than the
blank
template, if you want to use image-based provisioning. For more information about creating templates for virtual machines, see Templates in the Red Hat Virtualization Virtual Machine Management Guide. An administration-like user on Red Hat Virtualization for communication with Satellite Server. Do not use the
admin@internal
user for this communication. Instead, create a new Red Hat Virtualization user with the following permissions:- System > Configure System > Login Permissions
- Network > Configure vNIC Profile > Create
- Network > Configure vNIC Profile > Edit Properties
- Network > Configure vNIC Profile > Delete
- Network > Configure vNIC Profile > Assign vNIC Profile to VM
- Network > Configure vNIC Profile > Assign vNIC Profile to Template
- Template > Provisioning Operations > Import/Export
- VM > Provisioning Operations > Create
- VM > Provisioning Operations > Delete
- VM > Provisioning Operations > Import/Export
- VM > Provisioning Operations > Edit Storage
- Disk > Provisioning Operations > Create
Disk > Disk Profile > Attach Disk Profile
For more information about how to create a user and add permissions in Red Hat Virtualization, see Administering User Tasks From the Administration Portal in the Red Hat Virtualization Administration Guide.
Procedure Overview
- Section 10.1, “Adding the Red Hat Virtualization Connection to Satellite Server”.
-
Optional: Section 10.2, “Preparing Cloud-init Images in Red Hat Virtualization”. Use this procedure if you want to use
cloud-init
to configure an image-based virtual machine. - Optional: Section 10.3, “Adding Red Hat Virtualization Images to Satellite Server”. Use this procedure if you want to use image-based provisioning.
-
Optional: Section 10.4, “Preparing a Cloud-init Template”. Use this procedure if you want to use
cloud-init
to configure an image-based virtual machine. - Section 10.5, “Adding Red Hat Virtualization Details to a Compute Profile”.
- Section 10.6, “Creating Hosts on Red Hat Virtualization”.
10.1. Adding the Red Hat Virtualization Connection to Satellite Server
Use this procedure to add Red Hat Virtualization as a compute resource in Satellite.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click Create Compute Resource.
- In the Name field, enter a name for the new compute resource.
- From the Provider list, select RHV.
- In the Description field, enter a description for the compute resource.
-
In the URL field, enter the connection URL for the Red Hat Virtualization Manager’s API in the following form:
https://rhv.example.com/ovirt-engine/api/v3
. - Optionally, select the Use APIv4 check box to evaluate the new Red Hat Virtualization Manager API.
- In the User field, enter the name of a user with permissions to access Red Hat Virtualization Manager’s resources.
- In the Password field, enter the password of the user.
- Click Load Datacenters to populate the Datacenter list with data centers from your Red Hat Virtualization environment.
- From the Datacenter list, select a data center.
- From the Quota ID list, select a quota to limit resources available to Satellite.
- In the X509 Certification Authorities field, enter the certificate authority for SSL/TLS access. Alternatively, if you leave the field blank, a self-signed certificate is generated on the first API request by the server.
- Click the Locations tab and select the location you want to use.
- Click the Organizations tab and select the organization you want to use.
- Click Submit to save the compute resource.
For CLI Users
Enter the
hammer compute-resource create
command withOvirt
for--provider
and the name of the data center you want to use for--datacenter
.# hammer compute-resource create \ --name "My_RHV" --provider "Ovirt" \ --description "RHV server at rhv.example.com" \ --url "https://rhv.example.com/ovirt-engine/api" \ --use-v4 "false" --user "Satellite_User" \ --password "My_Password" \ --locations "New York" --organizations "My_Organization" \ --datacenter "My_Datacenter"
Optionally, to evaluate the new Red Hat Virtualization Manager API, change
false
totrue
for the--use-v4
option.
10.2. Preparing Cloud-init Images in Red Hat Virtualization
To use cloud-init
during provisioning, you must prepare an image with cloud-init
installed in Red Hat Virtualization, and then import the image to Satellite to use for provisioning.
Procedure
- In Red Hat Virtualization, create a virtual machine to use for image-based provisioning in Satellite.
On the virtual machine, install
cloud-init
:yum install cloud-init
To the
/etc/cloud/cloud.cfg
file, add the following information:datasource_list: ["NoCloud", "ConfigDrive"]
- In Red Hat Virtualization, create an image from this virtual machine.
When you add this image to Satellite, ensure that you select the User Data check box.
10.3. Adding Red Hat Virtualization Images to Satellite Server
To create hosts using image-based provisioning, you must add information about the image, such as access details and the image location, to your Satellite Server.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click the name of the Red Hat Virtualization connection.
- Click Create Image.
- In the Name field, enter a name for the image.
- From the Operating System list, select the image’s base operating system.
- From the Architecture list, select the operating system architecture.
-
In the Username field, enter the SSH user name for image access. This is normally the
root
user. - In the Password field, enter the SSH password for image access.
- From the Image list, select an image from the Red Hat Virtualization compute resource.
-
Optional: Select the User Data check box if the image supports user data input, such as
cloud-init
data. - Click Submit to save the image details.
For CLI Users
Create the image with the
hammer compute-resource image create
command. Use the--uuid
option to store the template UUID on the Red Hat Virtualization server.# hammer compute-resource image create \ --name "RHV_Image" \ --compute-resource "My_RHV" --operatingsystem "RedHat version" \ --architecture "x86_64" \ --username root \ --uuid "9788910c-4030-4ae0-bad7-603375dd72b1" \
10.4. Preparing a Cloud-init Template
Procedure
- In the Satellite web UI, navigate to Hosts > Provisioning Templates, and click Create Template.
- In the Name field, enter a name for the template.
In the Editor field, enter the following template details:
<%# kind: user_data name: Cloud-init -%> #cloud-config hostname: <%= @host.shortname %> <%# Allow user to specify additional SSH key as host paramter -%> <% if @host.params['sshkey'].present? || @host.params['remote_execution_ssh_keys'].present? -%> ssh_authorized_keys: <% if @host.params['sshkey'].present? -%> - <%= @host.params['sshkey'] %> <% end -%> <% if @host.params['remote_execution_ssh_keys'].present? -%> <% @host.params['remote_execution_ssh_keys'].each do |key| -%> - <%= key %> <% end -%> <% end -%> <% end -%> runcmd: - | #!/bin/bash <%= indent 4 do snippet 'subscription_manager_registration' end %> <% if @host.info['parameters']['realm'] && @host.realm && @host.realm.realm_type == 'Red Hat Identity Management' -%> <%= indent 4 do snippet 'idm_register' end %> <% end -%> <% unless @host.operatingsystem.atomic? -%> # update all the base packages from the updates repository yum -t -y -e 0 update <% end -%> <% # safemode renderer does not support unary negation non_atomic = @host.operatingsystem.atomic? ? false : true pm_set = @host.puppetmaster.empty? ? false : true puppet_enabled = non_atomic && (pm_set || @host.params['force-puppet']) %> <% if puppet_enabled %> yum install -y puppet cat > /etc/puppet/puppet.conf << EOF <%= indent 4 do snippet 'puppet.conf' end %> EOF # Setup puppet to run on system reboot /sbin/chkconfig --level 345 puppet on /usr/bin/puppet agent --config /etc/puppet/puppet.conf --onetime --tags no_such_tag <%= @host.puppetmaster.blank? ? '' : "--server #{@host.puppetmaster}" %> --no-daemonize /sbin/service puppet start <% end -%> phone_home: url: <%= foreman_url('built') %> post: [] tries: 10pp
- Click the Type tab and from the Type list, select User data template.
- Click the Association tab, and from the Applicable Operating Systems list, select the operating system that you want associate with the template.
- Click the Locations tab, and from the Locations list, select the location that you want to associate with the template.
- Click the Organizations tab, and from the Organization list, select the organization that you want to associate with the template.
- Click Submit.
- Navigate to Hosts > Operating Systems, and select the operating system you want to associate with the template.
- Click the Templates tab, and from the User data template list, select the name of the new template.
- Click Submit.
10.5. Adding Red Hat Virtualization Details to a Compute Profile
Use this procedure to add Red Hat Virtualization hardware settings to a compute profile. When you create a host on KVM using this compute profile, these settings are automatically populated.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles.
- In the Compute Profiles window, click the name of an existing compute profile, or click Create Compute Profile, enter a Name, and click Submit.
- Click the name of the Red Hat Virtualization compute resource.
- From the Cluster list, select the target host cluster in the Red Hat Virtualization environment.
- From the Template list, select the RHV template to use for the Cores and Memory settings.
- In the Cores field, enter the number of CPU cores to allocate to the new host.
- In the Memory field, enter the amount of memory to allocate to the new host.
- From the Image list, select image to use for image-based provisioning.
In the Network Interfaces area, enter the network parameters for the host’s network interface. You can create multiple network interfaces. However, at least one interface must point to a Capsule-managed network. For each network interface, enter the following details:
- In the Name field, enter the name of the network interface.
- From the Network list, select The logical network that you want to use.
In the Storage area, enter the storage parameters for the host. You can create multiple volumes for the host. For each volume, enter the following details:
- In the Size (GB) enter the size, in GB, for the new volume.
- From the Storage domain list, select the storage domain for the volume.
- From the Preallocate disk, select either thin provisioning or preallocation of the full disk.
- From the Bootable list, select whether you want a bootable or non-bootable volume.
- Click Submit to save the compute profile.
For CLI Users
To create a compute profile, enter the following command:
# hammer compute-profile create --name "Red Hat Virtualization CP"
To set the values for the compute profile, enter the following command:
# hammer compute-profile values create --compute-profile "Red Hat Virtualization CP" \ --compute-resource "My_RHV" \ --interface "compute_interface=Interface_Type,compute_name=eth0,compute_network=satnetwork" \ --volume "size_gb=20G,storage_domain=Data,bootable=true" \ --compute-attributes "cluster=Default,cores=1,memory=1073741824,start=true""
10.6. Creating Hosts on Red Hat Virtualization
In Satellite, you can use Red Hat Virtualization provisioning to create hosts over a network connection or from an existing image:
- If you want to create a host over a network connection, the new host must be able to access either the Satellite Server’s integrated Capsule or an external Capsule Server on a Red Hat Virtualization virtual network, so that the host has access to PXE provisioning services. This new host entry triggers the Red Hat Virtualization server to create and start a virtual machine. If the virtual machine detects the defined Capsule Server through the virtual network, the virtual machine boots to PXE and begins to install the chosen operating system.
- If you want to create a host with an existing image, the new host entry triggers the Red Hat Virtualization server to create the virtual machine using a pre-existing image as a basis for the new volume.
DHCP Conflicts
For network-based provisioning, if you use a virtual network on the Red Hat Virtualization server for provisioning, select a network that does not provide DHCP assignments. This causes DHCP conflicts with Satellite Server when booting new hosts.
Procedure
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- Click the Organization and Location tabs to ensure that the provisioning context is automatically set to the current context.
- From the Host Group list, select the host group that you want to use to populate the form.
- From the Deploy on list, select the Red Hat Virtualization connection.
- From the Compute Profile list, select a profile to use to automatically populate virtual machine settings.
- Click the Interface tab and click Edit on the host’s interface.
Verify that the fields are automatically populated, particularly the following items:
- The Name from the Host tab becomes the DNS name.
- Satellite Server automatically assigns an IP address for the new host.
- The MAC address field is blank. The Red Hat Virtualization server assigns a MAC address to the host.
- The Managed, Primary, and Provision options are automatically selected for the first interface on the host. If not, select them.
- The Red Hat Virtualization-specific fields are populated with settings from your compute profile. Modify these settings if required.
- Click the Operating System tab, and confirm that all fields automatically contain values.
Select the Provisioning Method that you want to use:
- For network-based provisioning, click Network Based.
- For image-based provisioning, click Image Based.
- Click Resolve in Provisioning templates to check the new host can identify the right provisioning templates to use.
- Click the Virtual Machine tab and confirm that these settings are populated with details from the host group and compute profile. Modify these settings to suit your needs.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save the host entry.
For CLI Users
To use network-based provisioning, create the host with the
hammer host create
command and include--provision-method build
. Replace the values in the following example with the appropriate values for your environment.# hammer host create \ --name "RHV-vm1" \ --organization "My_Organization" \ --location "New York" \ --hostgroup "Base" \ --compute-resource "My_RHV" \ --provision-method build \ --build true \ --enabled true \ --managed true \ --interface "managed=true,primary=true,provision=true,compute_name=eth0,compute_network=satnetwork" \ --compute-attributes="cluster=Default,cores=1,memory=1073741824,start=true" \ --volume="size_gb=20G,storage_domain=Data,bootable=true"
To use image-based provisioning, create the host with the
hammer host create
command and include--provision-method image
. Replace the values in the following example with the appropriate values for your environment.# hammer host create \ --name "RHV-vm2" \ --organization "My_Organization" \ --location "New York" \ --hostgroup "Base" \ --compute-resource "My_RHV" \ --provision-method image \ --image "RHV_Image" \ --enabled true \ --managed true \ --interface "managed=true,primary=true,provision=true,compute_name=eth0,compute_network=satnetwork" \ --compute-attributes="cluster=Default,cores=1,memory=1073741824,start=true" \ --volume="size_gb=20G,storage_domain=Data,bootable=true"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
Chapter 11. Provisioning Virtual Machines in VMware vSphere
VMware vSphere is an enterprise-level virtualization platform from VMware. Red Hat Satellite 6 can interact with the vSphere platform, including creating new virtual machines and controlling their power management states.
11.1. Prerequisites for VMware vSphere Provisioning
The requirements for VMware vSphere provisioning include:
- A Capsule Server managing a network on the vSphere environment. Ensure no other DHCP services run on this network to avoid conflicts with the Capsule Server. For more information, see Chapter 3, Configuring Networking.
- An existing VMware template if you want to use image-based provisioning.
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
11.2. Creating a VMware vSphere User
The VMware vSphere server requires an administration-like user for Satellite Server communication. For security reasons, do not use the administrator
user for such communication. Instead, create a user with the following permissions:
For VMware vCenter Server version 6.8, set the following permissions:
- All Privileges → Datastore → Allocate Space, Browse datastore, Update Virtual Machine files, Low level file operations
- All Privileges → Network → Assign Network
- All Privileges → Resource → Assign virtual machine to resource pool
- All Privileges → Virtual Machine → Change Config (All)
- All Privileges → Virtual Machine → Interaction (All)
- All Privileges → Virtual Machine → Edit Inventory (All)
- All Privileges → Virtual Machine → Provisioning (All)
Note that the same steps also apply to VMware vCenter Server version 7.0.
For VMware vCenter Server version 6.5, set the following permissions:
- All Privileges → Datastore → Allocate Space, Browse datastore, Update Virtual Machine files, Low level file operations
- All Privileges → Network → Assign Network
- All Privileges → Resource → Assign virtual machine to resource pool
- All Privileges → Virtual Machine → Configuration (All)
- All Privileges → Virtual Machine → Interaction (All)
- All Privileges → Virtual Machine → Inventory (All)
- All Privileges → Virtual Machine → Provisioning (All)
11.3. Adding a VMware vSphere Connection to Satellite Server
Use this procedure to add a VMware vSphere connection in Satellite Server’s compute resources.
Ensure that the host and network-based firewalls are configured to allow Satellite to vCenter communication on TCP port 443. Verify that Satellite is able to resolve the host name of vCenter and vCenter is able to resolve Satellite Server’s host name.
Procedure
To add a connection, complete the following steps:
- In the Satellite web UI, navigate to Infrastructure > Compute Resources, and in the Compute Resources window, click Create Compute Resource.
- In the Name field, enter a name for the resource.
- From the Provider list, select VMware.
- In the Description field, enter a description for the resource.
- In the VCenter/Server field, enter the IP address or host name of the vCenter server.
- In the User field, enter the user name with permission to access the vCenter’s resources.
- In the Password field, enter the password for the user.
- Click Load Datacenters to populate the list of data centers from your VMware vSphere environment.
- From the Datacenter list, select a specific data center to manage from this list.
- In the Fingerprint field, ensure that this field is populated with the fingerprint from the data center.
- From the Display Type list, select a console type, for example, VNC or VMRC. Note that VNC consoles are unsupported on VMware ESXi 6.5 and later.
Optional: In the VNC Console Passwords field, select the Set a randomly generated password on the display connection check box to secure console access for new hosts with a randomly generated password. You can retrieve the password for the VNC console to access guest virtual machine console from the
libvirtd
host from the output of the following command:# virsh edit your_VM_name <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0' passwd='your_randomly_generated_password'>
The password randomly generates every time the console for the virtual machine opens, for example, with virt-manager.
- From the Enable Caching list, you can select whether to enable caching of compute resources. For more information, see Section 11.8, “Caching of Compute Resources”.
- Click the Locations and Organizations tabs and verify that the values are automatically set to your current context. You can also add additional contexts.
- Click Submit to save the connection.
For CLI Users
Create the connection with the hammer compute-resource create
command. Select Vmware
as the --provider
and set the instance UUID of the data center as the --uuid
:
# hammer compute-resource create --name "My_vSphere" \ --provider "Vmware" \ --description "vSphere server at vsphere.example.com" \ --server "vsphere.example.com" --user "My_User" \ --password "My_Password" --locations "My_Location" --organizations "My_Organization" \ --datacenter "My_Datacenter"
11.4. Adding VMware vSphere Images to Satellite Server
VMware vSphere uses templates as images for creating new virtual machines. If using image-based provisioning to create new hosts, you need to add VMware template details to your Satellite Server. This includes access details and the template name.
Procedure
To add an image, complete the following steps:
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and in the Compute Resources window, click the VMware vSphere connection.
- In the Name field, enter a name for the image.
- From the Operatingsystem list, select the image’s base operating system.
- From the Architecture list, select the operating system architecture.
-
In the User field, enter the SSH user name for image access. This is normally the
root
user. - In the Password field, enter the SSH password for image access.
-
From the User data list, select whether you want the images to support user data input, such as
cloud-init
data. - In the Image field, enter the relative path and name of the template on the vSphere environment. Do not include the data center in the relative path.
- Click Submit to save the image details.
For CLI Users
Create the image with the hammer compute-resource image create
command. Use the --uuid
field to store the relative template path on the vSphere environment.
# hammer compute-resource image create --name "Test_vSphere_Image" \ --operatingsystem "RedHat 7.2" --architecture "x86_64" \ --username root --uuid "Templates/RHEL72" \ --compute-resource "My_vSphere"
11.5. Adding VMware vSphere Details to a Compute Profile
You can predefine certain hardware settings for virtual machines on VMware vSphere. You achieve this through adding these hardware settings to a compute profile.
Procedure
To add VMware vSphere details to a compute profile, complete the following steps:
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles and, in the Compute Profiles window, click the name of the compute profile, and then click the vSphere connection.
- In the CPUs field, enter the number of CPUs to allocate to the new host.
- In the Cores per socket field, enter the number of cores to allocate to each CPU.
- In the Memory field, enter the amount of memory to allocate to the new host.
- In the Cluster field, enter the name of the target host cluster on the VMware environment.
- From the Resource pool list, select an available resource allocations for the host.
- In the Folder field, enter the folder to organize the host.
- From the Guest OS list, select the operating system you want to use in VMware vSphere.
- From the SCSI controller list, select the disk access method for the host.
- From the Virtual H/W version list, select the underlying VMware hardware abstraction to use for virtual machines.
- You can select the Memory hot add or CPU hot add check boxes if you want to add more resources while the virtual machine is powered.
- From the Image list, select the image to use if performing image-based provisioning.
- From the Network Interfaces list, select the network parameters for the host’s network interface. You can create multiple network interfaces. However, at least one interface must point to a Capsule-managed network.
- Select the Eager zero check box if you want to use eager zero thick provisioning. If unchecked, the disk uses lazy zero thick provisioning.
- Click Submit to save the compute profile.
For CLI Users
To create the compute profile, enter the following command:
# hammer compute-profile create --name "VMWare CP"
To add the values for the compute profile, enter the following command:
# hammer compute-profile values create --compute-profile "VMWare CP" \ --compute-resource "My_vSphere" \ --interface "compute_type=VirtualE1000,compute_network=mynetwork \ --volume "size_gb=20G,datastore=Data,name=myharddisk,thin=true" \ --compute-attributes "cpus=1,corespersocket=2,memory_mb=1024,cluster=MyCluster,path=MyVMs,start=true"
11.6. Creating Hosts on a VMware vSphere Server
The VMware vSphere provisioning process provides the option to create hosts over a network connection or using an existing image.
For network-based provisioning, you must create a host to access either Satellite Server’s integrated Capsule or an external Capsule Server on a VMware vSphere virtual network, so that the host has access to PXE provisioning services. The new host entry triggers the VMware vSphere server to create the virtual machine. If the virtual machine detects the defined Capsule Server through the virtual network, the virtual machine boots to PXE and begins to install the chosen operating system.
DHCP Conflicts
If you use a virtual network on the VMware vSphere server for provisioning, ensure that you select a virtual network that does not provide DHCP assignments. This causes DHCP conflicts with Satellite Server when booting new hosts.
For image-based provisioning, use the pre-existing image as a basis for the new volume.
Procedure
To create a host for a VMware vSphere server, complete the following steps:
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter the name that you want to become the provisioned system’s host name.
- Click the Organization and Location tabs to ensure that the provisioning context is automatically set to the current context.
- From the Host Group list, select the host group that you want to use to populate the form.
- From the Deploy on list, select the VMware vSphere connection.
- From the Compute Profile list, select a profile to use to automatically populate virtual machine-based settings.
- Click the Interface tab and click Edit on the host’s interface.
Verify that the fields are automatically populated with values. Note in particular:
- The Name from the Host tab becomes the DNS name.
- The Satellite Server automatically assigns an IP address for the new host.
- Ensure that the MAC address field is blank. The VMware vSphere server assigns one to the host.
- Verify that the Managed, Primary, and Provision options are automatically selected for the first interface on the host. If not, select them.
- In the interface window, review the VMware vSphere-specific fields that are populated with settings from our compute profile. Modify these settings to suit your needs.
- Click the Operating System tab, and confirm that all fields automatically contain values.
Select the Provisioning Method that you want:
- For network-based provisioning, click Network Based.
- For image-based provisioning, click Image Based.
- For boot-disk provisioning, click Boot disk based.
- Click Resolve in Provisioning templates to check the new host can identify the right provisioning templates to use.
- Click the Virtual Machine tab and confirm that these settings are populated with details from the host group and compute profile. Modify these settings to suit your requirements.
- Click the Parameters tab and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save the host entry.
For CLI Users
Create the host from a network with the hammer host create
command and include --provision-method build
to use network-based provisioning.
# hammer host create --name "vmware-test1" --organization "My_Organization" \ --location "New York" --hostgroup "Base" \ --compute-resource "My_vSphere" --provision-method build \ --build true --enabled true --managed true \ --interface "managed=true,primary=true,provision=true,compute_type=VirtualE1000,compute_network=mynetwork" \ --compute-attributes="cpus=1,corespersocket=2,memory_mb=1024,cluster=MyCluster,path=MyVMs,start=true" \ --volume="size_gb=20G,datastore=Data,name=myharddisk,thin=true"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
For CLI Users
Create the host from an image with the hammer host create
command and include --provision-method image
to use image-based provisioning.
# hammer host create --name "vmware-test2" --organization "My_Organization" \ --location "New York" --hostgroup "Base" \ --compute-resource "My_VMware" --provision-method image \ --image "Test VMware Image" --enabled true --managed true \ --interface "managed=true,primary=true,provision=true,compute_type=VirtualE1000,compute_network=mynetwork" \ --compute-attributes="cpus=1,corespersocket=2,memory_mb=1024,cluster=MyCluster,path=MyVMs,start=true" \ --volume="size_gb=20G,datastore=Data,name=myharddisk,thin=true"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
11.7. Using the VMware vSphere Cloud-init and Userdata Templates for Provisioning
You can use VMware with the Cloud-init
and Userdata
templates to insert user data into the new virtual machine, to make further VMware customization, and to enable the VMware-hosted virtual machine to call back to Satellite.
You can use the same procedures to set up a VMware compute resource within Satellite, with a few modifications to the work flow.
VMware cloud-init Provisioning Overview
When you set up the compute resource and images for VMware provisioning in Satellite, the following sequence of provisioning events occur:
- The user provisions one or more virtual machines using the Satellite web UI, API, or hammer
- Satellite calls the VMware vCenter to clone the virtual machine template
-
Satellite
userdata
provisioning template adds customized identity information -
When provisioning completes, the
Cloud-init
provisioning template instructs the virtual machine to call back to Capsule whencloud-init
runs - VMware vCenter clones the template to the virtual machine
- VMware vCenter applies customization for the virtual machine’s identity, including the host name, IP, and DNS
-
The virtual machine builds,
cloud-init
is invoked and calls back Satellite on port80
, which then redirects to443
Port and Firewall Requirements
Because of the cloud-init
service, the virtual machine always calls back to Satellite even if you register the virtual machine to Capsule. Ensure that you configure port and firewall settings to open any necessary connections.
For more information about port and firewall requirements, see Port and Firewall Requirements in the Installing Satellite and Ports and Firewalls Requirements in Installing Capsule Server.
Associating the userdata
and Cloud-init
Templates with the Operating System
- In the Satellite web UI, navigate to Hosts > Operating Systems, and select the operating system that you want to use for provisioning.
- Click the Template tab.
- From the Cloud-init template list, select Cloudinit default.
- From the User data template list, select UserData open-vm-tools.
- Click Submit to save the changes.
Preparing an Image to use the cloud-init Template
To prepare an image, you must first configure the settings that you require on a virtual machine that you can then save as an image to use in Satellite.
To use the cloud-init
template for provisioning, you must configure a virtual machine so that cloud-init
is installed, enabled, and configured to call back to Satellite Server.
For security purposes, you must install a CA certificate to use HTTPs for all communication. This procedure includes steps to clean the virtual machine so that no unwanted information transfers to the image you use for provisioning.
If you have an image with cloud-init
, you must still follow this procedure to enable cloud-init
to communicate with Satellite because cloud-init
is disabled by default.
On the virtual machine that you use to create the image, install
cloud-init
,open-vm-tools
, andperl
:# yum -y install cloud-init open-vm-tools perl
Create a configuration file for
cloud-init
:# vi /etc/cloud/cloud.cfg.d/example_cloud-init_config.cfg
Add the following information to the
example_cloud_init_config.cfg
file:datasource_list: [NoCloud] datasource: NoCloud: seedfrom: https://satellite.example.com/userdata/ EOF
Enable the CA certificates for the image:
# update-ca-trust enable
Download the
katello-server-ca.crt
file from Satellite Server:# wget -O /etc/pki/ca-trust/source/anchors/cloud-init-ca.crt http://satellite.example.com/pub/katello-server-ca.crt
To update the record of certificates, enter the following command:
# update-ca-trust extract
Use the following commands to clean the image:
# systemctl stop rsyslog # systemctl stop auditd # package-cleanup --oldkernels --count=1 # yum clean all
Use the following commands to reduce logspace, remove old logs, and truncate logs:
# logrotate -f /etc/logrotate.conf # rm -f /var/log/*-???????? /var/log/*.gz # rm -f /var/log/dmesg.old # rm -rf /var/log/anaconda # cat /dev/null > /var/log/audit/audit.log # cat /dev/null > /var/log/wtmp # cat /dev/null > /var/log/lastlog # cat /dev/null > /var/log/grubby
Remove
udev
hardware rules:# rm -f /etc/udev/rules.d/70*
Remove the
uuid
fromifcfg
scripts:# cat > /etc/sysconfig/network-scripts/ifcfg-ens192 <<EOM DEVICE=ens192 ONBOOT=yes EOM
Remove the SSH host keys:
# rm -f /etc/ssh/SSH_keys
Remove root user’s shell history:
# rm -f ~root/.bash_history # unset HISTFILE
Remove root user’s SSH history:
# rm -rf ~root/.ssh/known_hosts
You can now create an image from this virtual machine.
You can use the Section 11.4, “Adding VMware vSphere Images to Satellite Server” section to add the image to Satellite.
Configuring Capsule to Forward the user data Template
If you deploy Satellite with the Capsule templates feature, you must configure Satellite to recognize hosts' IP addresses forwarded over the X-Forwarded-For HTTP header to serve correct template payload.
For security reasons, Satellite recognizes this HTTP header only from localhost. For each individual Capsule, you must configure a regular expression to recognize hosts' IP addresses. From the web UI, you can do this by navigating to Administer > Settings > Provisioning, and changing the Remote address setting. From the CLI, you can do this by entering the following command:
# hammer settings set --name remote_addr --value '(localhost(4|6|4to6)?|192.168.122.(1|2|3))'
11.8. Caching of Compute Resources
Caching of compute resources speeds up rendering of VMware information.
11.8.1. Enabling Caching of Compute Resources
To enable or disable caching of compute resources:
- In the Satellite web UI, navigate to Infrastructure > Compute Resources.
- Click the Edit button to the right of the VMware server you want to update.
- Select the Enable caching check box.
11.8.2. Refreshing the Compute Resources Cache
To refresh the cache of compute resources to update compute resources information:
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources.
- Select a VMware server you want to refresh the compute resources cache for and click the Refresh Cache button.
For CLI Users
Use this API call to refresh the compute resources cache:
# curl -H "Accept:application/json,version=2" \ -H "Content-Type:application/json" -X PUT \ -u username:password -k \ https://satellite.example.com/api/compute_resources/compute_resource_id/refresh_cache
Use the hammer compute-resource list
command to determine the ID of the VMware server you want to refresh the compute resources cache for.
Chapter 12. Provisioning Virtual Machines on Container-native Virtualization
Container-native Virtualization addresses the needs of development teams that have adopted or want to adopt Kubernetes but possess existing virtual machine (VM)-based workloads that cannot be easily containerized. This technology provides a unified development platform where developers can build, modify, and deploy applications residing in application containers and VMs in a shared environment. These capabilities support rapid application modernization across the open hybrid cloud.
With Red Hat Satellite, you can create a compute resource for Container-native Virtualization so that you can provision and manage Kubernetes virtual machines using Satellite.
Note that template provisioning is not supported for this release.
The Container-native Virtualization compute resource is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process. For more information about the support scope of Red Hat Technology Preview features, see https://access.redhat.com/support/offerings/techpreview/.
Prerequisites
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
-
A Container-native Virtualization user that has the
cluster-admin
permissions for the Openshift Container Platform virtual cluster. For more information, see Using RBAC to Define and Apply Permissions in the Authentication guide of the Openshift Container Platform documentation. - A Capsule Server managing a network on the Container-native Virtualization server. Ensure that no other DHCP services run on this network to avoid conflicts with Capsule Server. For more information about network service configuration for Capsule Servers, see Chapter 3, Configuring Networking.
A Satellite user account with the following roles:
- Edit hosts
View hosts
For more information, see Assigning Roles to a User in the Administering Red Hat Satellite guide.
A custom role in Satellite with the following permissions:
- view_compute_resources
- destroy_compute_resources_vms
- power_compute_resources_vms
- create_compute_resources_vms
- view_compute_resources_vms
- view_locations
view_subnets
For more information about creating roles, see Creating a Role in the Administering Red Hat Satellite guide. For more information about adding permissions to a role, see Adding Permissions to a Role in the Administering Red Hat Satellite guide.
12.1. Adding a Container-native Virtualization Connection to Satellite Server
Use this procedure to add Container-native Virtualization as a compute resource in Satellite.
Procedure
Enter the following
satellite-installer
command to enable the Container-native Virtualization plugin for Satellite:# satellite-installer --enable-foreman-plugin-kubevirt
Generate a bearer token to use for HTTP and HTTPs authentication. On the Container-native Virtualization server, list the secrets that contain tokens:
# kubectl get secrets
List the token for your secret:
# kubectl get secrets YOUR_SECRET -o jsonpath='{.data.token}' | base64 -d | xargs
Make a note of this token to use later in this procedure.
- In the Satellite web UI, navigate to Infrastructure > Compute Resources, and click Create Compute Resource.
- In the Name field, enter a name for the new compute resource.
- From the Provider list, select Container-native Virtualization.
- In the Description field, enter a description for the compute resource.
- In the Hostname field, enter the address of the Container-native Virtualization server that you want to use.
- In the API Port field, enter the port number that you want to use for provisioning requests from Satellite to Container-native Virtualization.
- In the Namespace field, enter the user name of the Container-native Virtualization virtual cluster that you want to use.
- In the Token field, enter the bearer token for HTTP and HTTPs authentication.
- Optional: In the X509 Certification Authorities field, enter a certificate to enable client certificate authentication for API server calls.
Chapter 13. Provisioning Cloud Instances on Red Hat OpenStack Platform
Red Hat OpenStack Platform provides the foundation to build a private or public Infrastructure-as-a-Service (IaaS) cloud. It offers a massively scalable, fault-tolerant platform for the development of cloud-enabled workloads. In Red Hat Satellite 6, you can interact with Red Hat OpenStack Platform REST API to create cloud instances and control their power management states.
Prerequisites
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
- A Capsule Server managing a network in your OpenStack environment. For more information, see Chapter 3, Configuring Networking.
- An image added to OpenStack Image Storage (glance) service for image-based provisioning. For more information, see the Red Hat OpenStack Platform Instances and Images Guide.
Procedure Overview
- Section 13.1, “Adding the Red Hat OpenStack Platform Connection to Satellite Server”.
- Section 13.2, “Adding Red Hat OpenStack Platform Images to Satellite Server”.
- Section 13.3, “Adding Red Hat OpenStack Platform Details to a Compute Profile”.
- Section 13.4, “Creating Image-based Hosts on Red Hat OpenStack Platform”.
13.1. Adding the Red Hat OpenStack Platform Connection to Satellite Server
Use this procedure to add Red Hat OpenStack Platform as a compute resource in Satellite.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click Create Compute Resource.
- In the Name field, enter a name for the new compute resource.
- From the Provider list, select RHEL OpenStack Platform.
- In the Description field, enter a description for the compute resource.
-
In the URL field, enter the URL for the OpenStack Authentication keystone service’s API at the
tokens
resource. Use the following format:http://openstack.example.com:5000/v3.0/tokens
. - In the User and Password fields, enter the authentication user and password for Satellite to access the environment.
- In the Domain field, enter the domain for V3 authentication.
- From the Tenant list, select the tenant or project for Satellite Server to manage.
- To use external networks as primary networks for hosts, select the Allow external network as main network check box.
- Click the Locations and Organizations tabs and verify that the location and organization that you want to use are set to your current context. Add any additional contexts that you want to these tabs.
- Click Submit to save the Red Hat OpenStack Platform connection.
For CLI Users
To create a compute resource, enter the
hammer compute-resource create
command:# hammer compute-resource create --name "My_OpenStack" \ --provider "OpenStack" \ --description "My OpenStack environment at openstack.example.com" \ --url "http://openstack.example.com:5000/v3.0/tokens" --user "My_Username" \ --password "My_Password" --tenant "openstack" --locations "New York" \ --organizations "My_Organization"
13.2. Adding Red Hat OpenStack Platform Images to Satellite Server
To create hosts using image-based provisioning, you must add information about the image, such as access details and the image location, to your Satellite Server.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click the name of the Red Hat OpenStack Platform connection.
- Click Create Image.
- In the Name field, enter a name for the image.
- From the Operating System list, select the image’s base operating system.
- From the Architecture list, select the operating system architecture.
-
In the Username field, enter the SSH user name for image access. This is normally the
root
user. - In the Password field, enter the SSH password for image access.
- From the Image list, select an image from the Red Hat OpenStack Platform compute resource.
-
Optional: Select the User Data check box if the image supports user data input, such as
cloud-init
data. - Click Submit to save the image details.
For CLI Users
Create the image with the
hammer compute-resource image create
command. Use the--uuid
field to store the full path of the image location on the Red Hat OpenStack Platform server.# hammer compute-resource image create \ --name "OpenStack Image" \ --compute-resource "My_OpenStack_Platform" --operatingsystem "RedHat version" \ --architecture "x86_64" \ --username root \ --user-data true \ --uuid "/path/to/OpenstackImage.qcow2"
13.3. Adding Red Hat OpenStack Platform Details to a Compute Profile
Use this procedure to add Red Hat OpenStack Platform hardware settings to a compute profile. When you create a host on Red Hat OpenStack Platform using this compute profile, these settings are automatically populated.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles.
- In the Compute Profiles window, click the name of an existing compute profile, or click Create Compute Profile, enter a Name, and click Submit.
- Click the name of the Red Hat OpenStack Platform compute resource.
- From the Flavor list, select the hardware profile on Red Hat OpenStack Platform to use for the host.
- From the Availability zone list, select the target cluster to use within the Red Hat OpenStack Platform environment.
- From the Image list, select the image to use for image-based provisioning.
- From the Tenant list, select the tenant or project for the Red Hat OpenStack Platform instance.
- From the Security Group list, select the cloud-based access rules for ports and IP addresses.
- From the Internal network, select the private networks for the host to join.
- From the Floating IP network, select the external networks for the host to join and assign a floating IP address.
- From the Boot from volume, select whether a volume is created from the image. If not selected, the instance boots the image directly.
- In the New boot volume size (GB) field, enter the size, in GB, of the new boot volume.
- Click Submit to save the compute profile.
For CLI Users
The compute profile CLI commands are not yet implemented in Red Hat Satellite 6.8. As an alternative, you can include the same settings directly during the host creation process.
13.4. Creating Image-based Hosts on Red Hat OpenStack Platform
In Satellite, you can use Red Hat OpenStack Platform provisioning to create hosts from an existing image. The new host entry triggers the Red Hat OpenStack Platform server to create the instance using the pre-existing image as a basis for the new volume.
Procedure
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- Click the Organization and Location tabs to ensure that the provisioning context is automatically set to the current context.
- From the Host Group list, select the host group that you want to use to populate the form.
- From the Deploy on list, select the Red Hat OpenStack Platform connection.
- From the Compute Profile list, select a profile to use to automatically populate virtual machine settings.
- From the Lifecycle Environment list, select the environment.
- Click the Interfaces tab and click Edit on the host’s interface.
Verify that the fields are automatically populated, particularly the following items:
- The Name from the Host tab becomes the DNS name.
- The MAC address field is blank. Red Hat OpenStack Platform assigns a MAC address to the host during provisioning.
- Satellite Server automatically assigns an IP address for the new host.
- The Managed, Primary, and Provision options are automatically selected for the first interface on the host. If not, select them.
- Click the Operating System tab, and confirm that all fields automatically contain values.
- If you want to change the image that populates automatically from your compute profile, from the Images list, select a different image to base the new host’s root volume on.
- Click Resolve in Provisioning templates to check the new host can identify the right provisioning templates to use.
- Click the Virtual Machine tab and confirm that these settings are populated with details from the host group and compute profile. Modify these settings to suit your needs.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save the host entry.
For CLI Users
Create the host with the
hammer host create
command and include--provision-method image
. Replace the values in the following example with the appropriate values for your environment.# hammer host create \ --name "openstack-host1" \ --organization "My_Organization" \ --location "New York" \ --hostgroup "Base" \ --compute-resource "My_OpenStack_Platform" \ --provision-method image \ --image "OpenStack Image" \ --enabled true \ --managed true \ --interface "managed=true,primary=true,provision=true" \ --compute-attributes="flavor_ref=m1.small,tenant_id=openstack,security_groups=default,network=mynetwork"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
Chapter 14. Provisioning Cloud Instances in Amazon EC2
Amazon Elastic Compute Cloud (Amazon EC2) is a web service that provides public cloud compute resources. Using Satellite, you can interact with Amazon EC2’s public API to create cloud instances and control their power management states. Use the procedures in this chapter to add a connection to an Amazon EC2 account and provision a cloud instance.
14.1. Prerequisites for Amazon EC2 Provisioning
The requirements for Amazon EC2 provisioning include:
- A Capsule Server managing a network in your EC2 environment. Use a Virtual Private Cloud (VPC) to ensure a secure network between the hosts and the Capsule Server.
- An Amazon Machine Image (AMI) for image-based provisioning.
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
14.2. Adding an Amazon EC2 Connection to the Satellite Server
Use this procedure to add the Amazon EC2 connection in the Satellite Server’s compute resources.
Time Settings and Amazon Web Services
Amazon Web Services uses time settings as part of the authentication process. Ensure that Satellite Server’s time is correctly synchronized. Ensure that an NTP service, such as ntpd
or chronyd
, is running properly on the Satellite Server. Failure to provide the correct time to Amazon Web Services can lead to authentication failures.
For more information about synchronizing time in Satellite, see Synchronizing Time in Installing Satellite Server from a Connected Network.
Procedure
To add an Amazon EC2 connection, complete the following steps:
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and in the Compute Resources window, click Create Compute Resource.
- In the Name field, enter a name to identify the Amazon EC2 compute resource.
- From the Provider list, select EC2.
- In the Description field, enter information that helps distinguish the resource for future use.
- Optional: From the HTTP proxy list, select an HTTP proxy to connect to external API services. You must add HTTP proxies to Satellite before you can select a proxy from this list. For more information, see Section 14.3, “Using an HTTP Proxy with Compute Resources”.
- In the Access Key and Secret Key fields, enter the access keys for your Amazon EC2 account. For more information, see Managing Access Keys for your AWS Account on the Amazon documentation website.
- Optional: Click the Load Regions button to populate the Regions list.
- From the Region list, select the Amazon EC2 region or data center to use.
- Click the Locations tab and ensure that the location you want to use is selected, or add a different location.
- Click the Organizations tab and ensure that the organization you want to use is selected, or add a different organization.
- Click Submit to save the Amazon EC2 connection.
- Select the new compute resource and then click the SSH keys tab, and click Download to save a copy of the SSH keys to use for SSH authentication. Until BZ1793138 is resolved, you can download a copy of the SSH keys only immediately after creating the Amazon EC2 compute resource. If you require SSH keys at a later stage, follow the procedure in Section 14.7, “Connecting to an Amazon EC2 instance using SSH”.
For CLI Users
Create the connection with the hammer compute-resource create
command. Use --user
and --password
options to add the access key and secret key respectively.
# hammer compute-resource create --name "My_EC2" --provider "EC2" \ --description "Amazon EC2 Public Cloud` --user "user_name" \ --password "secret_key" --region "us-east-1" --locations "New York" \ --organizations "My_Organization"
14.3. Using an HTTP Proxy with Compute Resources
In some cases, the EC2 compute resource that you use might require a specific HTTP proxy to communicate with Satellite. In Satellite, you can create an HTTP proxy and then assign the HTTP proxy to your EC2 compute resource.
However, if you configure an HTTP proxy for Satellite in Administer > Settings, and then add another HTTP proxy for your compute resource, the HTTP proxy that you define in Administer > Settings takes precedence.
Procedure
- In the Satellite web UI, navigate to Infrastructure > HTTP Proxies, and select New HTTP Proxy.
- In the Name field, enter a name for the HTTP proxy.
- In the URL field, enter the URL for the HTTP proxy, including the port number.
- Optional: Enter a username and password to authenticate to the HTTP proxy, if your HTTP proxy requires authentication.
- Click Test Connection to ensure that you can connect to the HTTP proxy from Satellite.
- Click the Locations tab and add a location.
- Click the Organization tab and add an organization.
- Click Submit.
14.4. Adding Amazon EC2 Images to Satellite Server
Amazon EC2 uses image-based provisioning to create hosts. You must add image details to your Satellite Server. This includes access details and image location.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and select an Amazon EC2 connection.
- Click the Images tab, and then click New Image.
- In the Name field, enter a name to identify the image for future use.
- From the Operating System list, select the operating system that corresponds with the image you want to add.
- From the Architecture list, select the operating system’s architecture.
-
In the Username field, enter the SSH user name for image access. This is normally the
root
user. - In the Password field, enter the SSH password for image access.
-
In the Image ID field, enter the Amazon Machine Image (AMI) ID for the image. This is usually in the following format:
ami-xxxxxxxx
. -
Optional: Select the User Data check box if the images support user data input, such as
cloud-init
data. If you enable user data, the Finish scripts are automatically disabled. This also applies in reverse: if you enable the Finish scripts, this disables user data. - Optional: In the IAM role field, enter the Amazon security role used for creating the image.
- Click Submit to save the image details.
For CLI Users
Create the image with the hammer compute-resource image create
command. Use the --uuid
field to store the full path of the image location on the Amazon EC2 server.
# hammer compute-resource image create --name "Test Amazon EC2 Image" \ --operatingsystem "RedHat 7.2" --architecture "x86_64" --username root \ --user-data true --uuid "ami-my_ami_id" --compute-resource "My_EC2"
14.5. Adding Amazon EC2 Details to a Compute Profile
You can add hardware settings for instances on Amazon EC2 to a compute profile.
Procedure
To add hardware settings, complete the following steps:
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles and click the name of your profile, then click an EC2 connection.
- From the Flavor list, select the hardware profile on EC2 to use for the host.
- From the Image list, select the image to use for image-based provisioning.
- From the Availability zone list, select the target cluster to use within the chosen EC2 region.
- From the Subnet list, add the subnet for the EC2 instance. If you have a VPC for provisioning new hosts, use its subnet.
- From the Security Groups list, select the cloud-based access rules for ports and IP addresses to apply to the host.
-
From the Managed IP list, select either a
Public
IP or aPrivate
IP. - Click Submit to save the compute profile.
For CLI Users
The compute profile CLI commands are not yet implemented in Red Hat Satellite. As an alternative, you can include the same settings directly during the host creation process.
14.6. Creating Image-Based Hosts on Amazon EC2
The Amazon EC2 provisioning process creates hosts from existing images on the Amazon EC2 server.
Procedure
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- From the Host Group list, you can select a host group to populate most of the new host’s fields.
- From the Deploy on list, select the EC2 connection.
- From the Compute Profile list, select a profile to use to automatically populate virtual machine-based settings.
- Click the Interface tab, and then click Edit on the host’s interface, and verify that the fields are populated with values. Leave the Mac Address field blank. The Satellite Server automatically selects and IP address and the Managed, Primary, and Provision options for the first interface on the host.
- Click the Operating System tab and confirm that all fields are populated with values.
- Click the Virtual Machine tab and confirm that all fields are populated with values.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save your changes.
This new host entry triggers the Amazon EC2 server to create the instance, using the pre-existing image as a basis for the new volume.
For CLI Users
Create the host with the hammer host create
command and include --provision-method image
to use image-based provisioning.
# hammer host create --name "ec2-test1" --organization "My_Organization" \ --location "New York" --hostgroup "Base" \ --compute-resource "My_EC2" --provision-method image \ --image "Test Amazon EC2 Image" --enabled true --managed true \ --interface "managed=true,primary=true,provision=true,subnet_id=EC2" \ --compute-attributes="flavor_id=m1.small,image_id=TestImage,availability_zones=us-east-1a,security_group_ids=Default,managed_ip=Public"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
14.7. Connecting to an Amazon EC2 instance using SSH
You can connect remotely to an Amazon EC2 instance from Satellite Server using SSH. However, to connect to any Amazon Web Services EC2 instance that you provision through Red Hat Satellite, you must first access the private key that is associated with the compute resource in the Foreman database, and use this key for authentication.
To locate the private key and connect to an Amazon EC2 server using SSH, complete the following steps:
To locate the compute resource list, on your Satellite Server base system, enter the following command, and note the ID of the compute resource that you want to use:
# hammer compute-resource list
Switch user to the
postgres
user:# su - postgres
Initiate the
postgres
shell:$ psql
Connect to the Foreman database as the user
postgres
:# postgres=# \c foreman
Select the secret from
key_pairs
wherecompute_resource_id = 3
:# select secret from key_pairs where compute_resource_id = 3; secret
-
Copy the key from after
-----BEGIN RSA PRIVATE KEY-----
until-----END RSA PRIVATE KEY-----
. Create a
.pem
file and paste your key into the file:# vim Keyname.pem
Ensure that you restrict access to the
.pem
file:# chmod 600 Keyname.pem
To connect to the Amazon EC2 instance, enter the following command:
ssh -i Keyname.pem ec2-user@example.aws.com
14.8. Configuring a Finish Template for an Amazon Web Service EC2 Environment
You can use Red Hat Satellite finish templates during the provisioning of Red Hat Enterprise Linux instances in an Amazon EC2 environment.
If you want to use a Finish template with SSH, Satellite must reside within the EC2 environment and in the correct security group. Satellite currently performs SSH finish provisioning directly, not using Capsule Server. If Satellite Server does not reside within EC2, the EC2 virtual machine reports an internal IP rather than the necessary external IP with which it can be reached.
To configure a finish template for Amazon EC2, complete the following steps:
- In the Red Hat Satellite web UI, navigate to Hosts > Provisioning Templates.
-
In the Provisioning Templates page, enter
Kickstart default finish
into the search field and click Search. - On the Kickstart default finish template, select Clone.
- In the Name field, enter a unique name for the template.
In the template, prefix each command that requires root privileges with
sudo
, except forsubscription-manager register
andyum
commands, or add the following line to run the entire template as the sudo user:sudo -s << EOS _Template_ _Body_ EOS
- Click the Association tab, and associate the template with a Red Hat Enterprise Linux operating system that you want to use.
- Click the Locations tab, and add the the location where the host resides.
- Click the Organizations tab, and add the organization that the host belongs to.
- Make any additional customizations or changes that you require, then click Submit to save your template.
- Navigate to Hosts > Operating systems and select the operating system that you want for your host.
- Click the Templates tab, and from the Finish Template list, select your finish template.
- Navigate to Hosts > Create Host and enter the information about the host that you want to create.
- Click the Parameters tab and navigate to Host parameters.
In Host parameters, click the Add Parameter button three times to add three new parameter fields. Add the following three parameters:
-
In the Name field, enter
remote_execution_ssh_keys
. In the corresponding Value field, enter the output ofcat /usr/share/foreman-proxy/.ssh/id_rsa_foreman_proxy.pub
. -
In the Name field, enter
remote_execution_ssh_user
. In the corresponding Value field, enterec2-user
. -
In the Name field, enter
activation_keys
. In the corresponding Value field, enter your activation key.
-
In the Name field, enter
- Click Submit to save the changes.
14.9. More Information about Amazon Web Services and Satellite
For information about how to locate Red Hat Gold Images on Amazon Web Services EC2, see How to Locate Red Hat Cloud Access Gold Images on AWS EC2.
For information about how to install and use the Amazon Web Service Client on Linux, see Install the AWS Command Line Interface on Linux in the Amazon Web Services documentation.
For information about importing and exporting virtual machines in Amazon Web Services, see VM Import/Export in the Amazon Web Services documentation.
Chapter 15. Provisioning Cloud Instances on Google Compute Engine
Red Hat Satellite can interact with Google Compute Engine (GCE), including creating new virtual machines and controlling their power management states. Only image-based provisioning is supported for creating GCE hosts.
Prerequisites
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
- In your GCE project, configure a service account with the necessary IAM Compute role. For more information, see Compute Engine IAM roles in the GCE documentation.
-
In your GCE project-wise metadata, set the
enable-oslogin
toFALSE
. For more information, see Enabling or disabling OS Login in the GCE documentation. -
Optional: If you want to use Puppet with GCE hosts, navigate to Administer > Settings > Puppet and enable the
Use UUID for certificates
setting to configure Puppet to use consistent Puppet certificate IDs. -
Based on your needs, associate a
finish
oruser_data
provisioning template with the operating system you want to use. For more information about provisioning templates, see Section 2.11, “Provisioning Templates”.
Procedure Overview
15.1. Adding a Google Compute Engine Connection to Satellite Server
Use this procedure to add Google Compute Engine (GCE) as a compute resource in Satellite.
Procedure
-
In GCE, generate a service account key in JSON format and upload this file to the
/usr/share/foreman/
directory on Satellite Server. On Satellite Server, change the owner for the service account key to the
foreman
user:# chown foreman /usr/share/foreman/gce_key.json
Configure permissions for the service account key to ensure that the file is readable:
# chmod 0600 /usr/share/foreman/gce_key.json
Restore SELinux context for the service account key:
# restorecon -vv /usr/share/foreman/gce_key.json
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click Create Compute Resource.
- In the Name field, enter a name for the compute resource.
- From the Provider list, select Google.
- Optional: In the Description field, enter a description for the resource.
- In the Google Project ID field, enter the project ID.
- In the Client Email field, enter the client email.
-
In the Certificate Path field, enter the path to the service account key. For example,
/usr/share/foreman/gce_key.json
. - Click Load Zones to populate the list of zones from your GCE environment.
- From the Zone list, select the GCE zone to use.
- Click Submit.
For CLI Users
-
In GCE, generate a service account key in JSON format and upload this file to the
/usr/share/foreman/
directory on Satellite Server. On Satellite Server, change the owner for the service account key to the
foreman
user:# chown foreman /usr/share/foreman/gce_key.json
Configure permissions for the service account key to ensure that the file is readable:
# chmod 0600 /usr/share/foreman/gce_key.json
Restore SELinux context for the service account key:
# restorecon -vv /usr/share/foreman/gce_key.json
Use the
hammer compute-resource create
command to add a GCE compute resource to Satellite:# hammer compute-resource create --name 'gce_cr' \ --provider 'gce' \ --project 'gce_project_id' \ --key-path 'gce_key.json' \ --zone 'us-west1-b' \ --email 'gce_email'
15.2. Adding Google Compute Engine Images to Satellite Server
To create hosts using image-based provisioning, you must add information about the image, such as access details and the image location, to your Satellite Server.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click the name of the Google Compute Engine connection.
- Click Create Image.
- In the Name field, enter a name for the image.
- From the Operating System list, select the image’s base operating system.
- From the Architecture list, select the operating system architecture.
-
In the Username field, enter the SSH user name for image access. Specify a user other than
root
, because theroot
user cannot connect to a GCE instance using SSH keys. The username must begin with a letter and consist of lowercase letters and numbers. - From the Image list, select an image from the Google Compute Engine compute resource.
-
Optional: Select the User Data check box if the image supports user data input, such as
cloud-init
data. - Click Submit to save the image details.
For CLI Users
Create the image with the
hammer compute-resource image create
command. With the--username
option, specify a user other thanroot
, because theroot
user cannot connect to a GCE instance using SSH keys. The username must begin with a letter and consist of lowercase letters and numbers.# hammer compute-resource image create \ --name 'gce_image_name' \ --compute-resource 'gce_cr' \ --operatingsystem-id 1 \ --architecture-id 1 \ --uuid '3780108136525169178' \ --username 'admin'
15.3. Adding Google Compute Engine Details to a Compute Profile
Use this procedure to add GCE hardware settings to a compute profile. When you create a host on GCE using this compute profile, these settings are automatically populated.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles.
- In the Compute Profiles window, click the name of an existing compute profile, or click Create Compute Profile, enter a Name, and click Submit.
- Click the name of the GCE compute resource.
- From the Machine Type list, select the machine type to use for provisioning.
- From the Image list, select the image to use for provisioning.
- From the Network list, select the GCE network to use for provisioning.
- Optional: Select the Associate Ephemeral External IP check box to assign a dynamic ephemeral IP address that Satellite uses to communicate with the host. This public IP address changes when you reboot the host. If you need a permanent IP address, reserve a static public IP address on GCE and attach it to the host.
- In the Size (GB) field, enter the size of the storage to create on the host.
- Click Submit to save the compute profile.
For CLI Users
Create a compute profile to use with the GCE compute resource:
# hammer compute-profile create --name gce_profile
Add GCE details to the compute profile.
# hammer compute-profile values create --compute-profile gce_profile \ --compute-resource 'gce_cr' \ --volume "size_gb=20" \ --compute-attributes "machine_type=f1-micro,associate_external_ip=true,network=default"
15.4. Creating Image-based Hosts on Google Compute Engine
In Satellite, you can use Google Compute Engine provisioning to create hosts from an existing image. The new host entry triggers the Google Compute Engine server to create the instance using the pre-existing image as a basis for the new volume.
Procedure
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- Click the Organization and Location tabs to ensure that the provisioning context is automatically set to the current context.
- From the Host Group list, select the host group that you want to use to populate the form.
- From the Deploy on list, select the Google Compute Engine connection.
- From the Compute Profile list, select a profile to use to automatically populate virtual machine settings.
- From the Lifecycle Environment list, select the environment.
- Click the Interfaces tab and click Edit on the host’s interface.
Verify that the fields are automatically populated, particularly the following items:
- The Name from the Host tab becomes the DNS name.
- The MAC address field is blank. Google Compute Engine assigns a MAC address to the host during provisioning.
- Satellite Server automatically assigns an IP address for the new host.
- The Domain field is populated with the required domain.
- The Managed, Primary, and Provision options are automatically selected for the first interface on the host. If not, select them.
- Click the Operating System tab, and confirm that all fields automatically contain values.
- Click Resolve in Provisioning templates to check the new host can identify the right provisioning templates to use.
- Click the Virtual Machine tab and confirm that these settings are populated with details from the host group and compute profile. Modify these settings to suit your needs.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save the host entry.
For CLI Users
Create the host with the
hammer host create
command and include--provision-method image
. Replace the values in the following example with the appropriate values for your environment.# hammer host create \ --name "GCE_VM" \ --organization "Your_Organization" \ --location "Your_Location" \ --compute-resource gce_cr_name --compute-profile "gce_profile_name" \ --provision-method 'image' \ --image gce_image_name \ --root-password "your_root_password" \ --interface "type=interface,domain_id=1,managed=true,primary=true,provision=true" \ --puppet-environment-id 1 \ --puppet-ca-proxy-id 1 \ --puppet-proxy-id 1 \ --architecture x86_64 \ --operatingsystem "operating_system_name"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
Chapter 16. Provisioning Cloud Instances on Microsoft Azure Resource Manager
Red Hat Satellite can interact with Microsoft Azure Resource Manager, including creating new virtual machines and controlling their power management states. Only image-based provisioning is supported for creating Azure hosts. This includes provisioning using Marketplace images, custom images, and shared image gallery.
For more information about Azure Resource Manager concepts, see Azure Resource Manager documentation.
Note that Satellite does not support Azure Government.
Prerequisites
- Synchronized content repositories for Red Hat Enterprise Linux. For more information, see Synchronizing Red Hat Repositories in the Content Management Guide.
- An activation key for host registration. For more information, see Creating An Activation Key in the Content Management guide.
- Ensure that you have the correct permissions to create an Azure Active Directory application. For more information, see Check Azure AD permissions in the Microsoft identity platform (Azure Active Directory for developers) documentation.
- You must create and configure an Azure Active Directory application and service principle to obtain Application or client ID, Directory or tenant ID, and Client Secret. For more information, see Use the portal to create an Azure AD application and service principal that can access resources in the Microsoft identity platform (Azure Active Directory for developers) documentation.
-
Optional: If you want to use Puppet with Azure hosts, navigate to Administer > Settings > Puppet and enable the
Use UUID for certificates
setting to configure Puppet to use consistent Puppet certificate IDs. -
Based on your needs, associate a
finish
oruser_data
provisioning template with the operating system you want to use. For more information about provisioning templates, see Section 2.11, “Provisioning Templates”. - Optional: If you want the virtual machine to use a static private IP address, create a subnet in Satellite with the Network Address field matching the Azure subnet address.
- Before creating RHEL BYOS images, you must accept the image terms either in the Azure CLI or Portal so that the image can be used to create and manage virtual machines for your subscription.
Procedure Overview
- Section 16.1, “Adding a Microsoft Azure Resource Manager Connection to Satellite Server”.
- Section 16.2, “Adding Microsoft Azure Resource Manager Images to Satellite Server”.
- Section 16.3, “Adding Microsoft Azure Resource Manager Details to a Compute Profile”.
- Section 16.4, “Creating Image-based Hosts on Microsoft Azure Resource Manager”.
16.1. Adding a Microsoft Azure Resource Manager Connection to Satellite Server
Use this procedure to add Microsoft Azure Resource Manager as a compute resource in Satellite. Note that you must add a separate compute resource for each Azure Resource Manager region that you want to use.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click Create Compute Resource.
- In the Name field, enter a name for the compute resource.
- From the Provider list, select Azure Resource Manager.
- Optional: In the Description field, enter a description for the resource.
- In the Client ID field, enter the Application or client ID.
- In the Client Secret field, enter the client secret.
- In the Subscription ID field, enter the subscription ID.
- In the Tenant ID field, enter the Directory or tenant ID.
- Click Load Regions. This tests if your connection to Azure Resource Manager is successful and loads the regions available in your subscription.
- From the Azure Region list, select the Azure region to use.
- Click Submit.
For CLI Users
Use the
hammer compute-resource create
command to add an Azure compute resource to Satellite. Note that the value for the--region
option must be in lowercase and must not contain special characters.# hammer compute-resource create --name azure_cr_name \ --provider azurerm \ --tenant tenant-id \ --app-ident client-id \ --secret-key client-secret \ --sub-id subscription-id \ --region 'region'
16.2. Adding Microsoft Azure Resource Manager Images to Satellite Server
To create hosts using image-based provisioning, you must add information about the image, such as access details and the image location, to your Satellite Server.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Resources and click the name of the Microsoft Azure Resource Manager connection.
- Click Create Image.
- In the Name field, enter a name for the image.
- From the Operating System list, select the image’s base operating system.
- From the Architecture list, select the operating system architecture.
-
In the Username field, enter the SSH user name for image access. You cannot use the
root
user. - Optional: In the Password field, enter a password to authenticate with.
In the Azure Image Name field, enter an image name in the format
prefix://UUID
.-
For a custom image, use the prefix
custom
. For example, custom://image-name. -
For a shared gallery image, use the prefix
gallery
. For example, gallery://image-name. For public and RHEL Bring Your Own Subscription (BYOS) images, use the prefix
marketplace
. For example, marketplace://OpenLogicCentOS:7.5:latest.For more information, see Find Linux VM images in the Azure Marketplace with the Azure CLI.
-
For a custom image, use the prefix
-
Optional: Select the User Data check box if the image supports user data input, such as
cloud-init
data. - Click Submit to save the image details.
For CLI Users
Create the image with the
hammer compute-resource image create
command. Note that the username that you enter for the image must be the same that you use when you create a host with this image. The--password
option is optional when creating an image. You cannot use theroot
user.# hammer compute-resource image create \ --name Azure_image_name \ --compute-resource azure_cr_name \ --uuid 'marketplace://RedHat:RHEL:7-RAW:latest' \ --username 'azure_username' \ --user-data no
16.3. Adding Microsoft Azure Resource Manager Details to a Compute Profile
Use this procedure to add Azure hardware settings to a compute profile. When you create a host on Azure using this compute profile, these settings are automatically populated.
Procedure
- In the Satellite web UI, navigate to Infrastructure > Compute Profiles.
- In the Compute Profiles window, click the name of an existing compute profile, or click Create Compute Profile, enter a Name, and click Submit.
- Click the name of the Azure compute resource.
- From the Resource group list, select the resource group to provision to.
- From the VM Size list, select a size of a virtual machine to provision.
- From the Platform list, select Linux. Satellite does not support provisioning virtual machines running Microsoft operating systems.
- In the Username field, enter a user name to authenticate with. Note that the username that you enter for compute profile must be the same that you use when creating an image.
To authenticate the user, use one of the following options:
- To authenticate using a password, enter a password in the Password field.
- To authenticate using an SSH key, enter an SSH key in the SSH Key field.
- Optional: If you want the virtual machine to use a premium virtual machine disk, select the Premium OS Disk check box.
- From the OS Disk Caching list, select the disc caching setting.
- Optional: In the Custom Script Command field, enter commands to perform on the virtual machine when the virtual machine is provisioned.
-
Optional: If you want to run custom scripts when provisioning finishes, in the Comma separated file URIs field, enter comma-separated file URIs of scripts to use. The scripts must contain
sudo
at the beginning because Red Hat Satellite downloads files to the/var/lib/waagent/custom-script/download/0/
directory on the host and scripts require sudo privileges to be executed. - Optional: If you want to create an additional volume on the VM, click the Add Volume button, enter the Size in GB and select the Data Disk Caching method.
- Click Add Interface.
- From the Azure Subnet list, select the Azure subnet to provision to.
- From the Public IP list, select the public IP setting.
- Optional: If you want the virtual machine to use a static private IP, select the Static Private IP check box.
- Click Submit.
For CLI Users
Create a compute profile to use with the Azure Resource Manager compute resource:
# hammer compute-profile create --name compute_profile_name
Add Azure details to the compute profile. With the
username
setting, enter the SSH user name for image access. Note that the username that you enter for compute profile must be the same that you use when creating an image.# hammer compute-profile values create \ --compute-profile "compute_profile_name" \ --compute-resource azure_cr_name \ --compute-attributes="resource_group=resource_group,vm_size=Standard_B1s,username=azure_user,password=azure_password,platform=Linux,script_command=touch /var/tmp/text.txt" \ --interface="compute_public_ip=Dynamic,compute_network=mysubnetID,compute_private_ip=false" --volume="disk_size_gb=5,data_disk_caching=None"
Optional: If you want to run scripts on the virtual machine after provisioning, specify the following settings:
-
To enter the script directly, with the
script_command
setting, enter a command to be executed on the provisioned virtual machine. -
To run a script from a URI, with the
script_uris
setting, enter comma-separated file URIs of scripts to use. The scripts must containsudo
at the beginning because Red Hat Satellite downloads files to the/var/lib/waagent/custom-script/download/0/
directory on the host and therefore scripts require sudo privileges to be executed.
-
To enter the script directly, with the
16.4. Creating Image-based Hosts on Microsoft Azure Resource Manager
In Satellite, you can use Microsoft Azure Resource Manager provisioning to create hosts from an existing image. The new host entry triggers the Microsoft Azure Resource Manager server to create the instance using the pre-existing image as a basis for the new volume.
Procedure
- In the Satellite web UI, navigate to Hosts > Create Host.
- In the Name field, enter a name for the host.
- Click the Organization and Location tabs to ensure that the provisioning context is automatically set to the current context.
- From the Host Group list, select the host group that you want to use to populate the form.
- From the Deploy on list, select the Microsoft Azure Resource Manager connection.
- From the Compute Profile list, select a profile to use to automatically populate virtual machine settings.
- From the Lifecycle Environment list, select the environment.
- Click the Interfaces tab and click Edit on the host’s interface.
Verify that the fields are automatically populated, particularly the following items:
- The Name from the Host tab becomes the DNS name.
- The MAC address field is blank. Microsoft Azure Resource Manager assigns a MAC address to the host during provisioning.
- The Azure Subnet field is populated with the required Azure subnet.
- The Managed, Primary, and Provision options are automatically selected for the first interface on the host. If not, select them.
- Optional: If you want to use a static private IP address, from the IPv4 Subnet list select the Satellite subnet with the Network Address field matching the Azure subnet address. In the IPv4 Address field, enter an IPv4 address within the range of your Azure subnet.
- Click the Operating System tab, and confirm that all fields automatically contain values.
- For Provisioning Method, ensure Image Based is selected.
- From the Image list, select the Azure Resource Manager image that you want to use for provisioning.
- In the Root Password field, enter the root password to authenticate with.
- Click Resolve in Provisioning templates to check the new host can identify the right provisioning templates to use.
- Click the Virtual Machine tab and confirm that these settings are populated with details from the host group and compute profile. Modify these settings to suit your needs.
- Click the Parameters tab, and ensure that a parameter exists that provides an activation key. If not, add an activation key.
- Click Submit to save the host entry.
For CLI Users
Create the host with the
hammer host create
command and include--provision-method image
. Replace the values in the following example with the appropriate values for your environment.# hammer host create \ --name="Azure_VM" \ --organization "Your_Organization" \ --location "Your_Location" \ --compute-resource azure_cr_name \ --compute-profile "compute_profile_name" \ --provision-method 'image' \ --image Azure_image_name \ --domain domain_name \ --architecture x86_64 \ --operatingsystem "operating_system_name"
For more information about additional host creation parameters for this compute resource, enter the hammer host create --help
command.
Appendix A. Initialization Script for Provisioning Examples
If you have not followed the examples in the Red Hat Satellite 6 Content Management Guide, you can use the following initialization script to create an environment for provisioning examples.
Create a script file (content-init.sh
) and include the following:
#!/bin/bash MANIFEST=$1 # Import the content from Red Hat CDN hammer organization create --name "ACME" --label "ACME" \ --description "Our example organization for managing content." hammer subscription upload --file ~/$MANIFEST --organization "ACME" hammer repository-set enable \ --name "Red Hat Enterprise Linux 7 Server (RPMs)" \ --releasever "7Server" --basearch "x86_64" \ --product "Red Hat Enterprise Linux Server" --organization "ACME" hammer repository-set enable \ --name "Red Hat Enterprise Linux 7 Server (Kickstart)" \ --releasever "7Server" --basearch "x86_64" \ --product "Red Hat Enterprise Linux Server" --organization "ACME" hammer repository-set enable \ --name "Red Hat Satellite Tools 6.8 (for RHEL 7 Server) (RPMs)" \ --basearch "x86_64" --product "Red Hat Enterprise Linux Server" \ --organization "ACME" hammer product synchronize --name "Red Hat Enterprise Linux Server" \ --organization "ACME" # Create our application life cycle hammer lifecycle-environment create --name "Development" \ --description "Environment for ACME's Development Team" \ --prior "Library" --organization "ACME" hammer lifecycle-environment create --name "Testing" \ --description "Environment for ACME's Quality Engineering Team" \ --prior "Development" --organization "ACME" hammer lifecycle-environment create --name "Production" \ --description "Environment for ACME's Product Releases" \ --prior "Testing" --organization "ACME" # Create and publish our Content View hammer content-view create --name "Base" \ --description "Base operating system" \ --repositories "Red Hat Enterprise Linux 7 Server RPMs x86_64 7Server,Red Hat Satellite Tools 6.8 for RHEL 7 Server RPMs x86_64" \ --organization "ACME" hammer content-view publish --name "Base" \ --description "Initial content view for our operating system" \ --organization "ACME" hammer content-view version promote --content-view "Base" --version 1 \ --to-lifecycle-environment "Development" --organization "ACME" hammer content-view version promote --content-view "Base" --version 1 \ --to-lifecycle-environment "Testing" --organization "ACME" hammer content-view version promote --content-view "Base" --version 1 \ --to-lifecycle-environment "Production" --organization "ACME"
Set executable permissions on the script:
# chmod +x content-init.sh
Download a copy of your Subscription Manifest from the Red Hat Customer Portal and run the script on the manifest:
# ./content-init.sh manifest_98f4290e-6c0b-4f37-ba79-3a3ec6e405ba.zip
This imports the necessary Red Hat content for the provisioning examples in this guide.
Appendix B. Provisioning FIPS-Compliant Hosts
Satellite supports provisioning hosts that comply with the National Institute of Standards and Technology’s Security Requirements for Cryptographic Modules standard, reference number FIPS 140-2, referred to here as FIPS.
To enable the provisioning of hosts that are FIPS-compliant, complete the following tasks:
- Change the provisioning password hashing algorithm for the operating system
- Create a host group and set a host group parameter to enable FIPS
For more information about creating host groups, see Creating a Host Group in the Managing Hosts guide.
The provisioned hosts have the FIPS-compliant settings applied. To confirm that these settings are enabled, complete the steps in Section B.3, “Verifying FIPS Mode is Enabled”.
B.1. Change the Provisioning Password Hashing Algorithm
To provision FIPS-compliant hosts, you must first set the password hashing algorithm that you use in provisioning to SHA256. This configuration setting must be applied for each operating system you want to deploy as FIPS-compliant.
Identify the Operating System IDs.
$ hammer os list
Update each operating system’s password hash value.
$ hammer os update --title Operating_System \ --password-hash SHA256
Repeat this command for each of the operating systems, using the matching value in the
TITLE
column:$ hammer os update --title "RedHat version_number" \ --password-hash SHA256
Note that you cannot use a comma-separated list of values.
B.2. Setting the FIPS-Enabled Parameter
To provision a FIPS-compliant host, you must create a host group and set the host group parameter fips_enabled
to true
. If this is not set to true
, or is absent, the FIPS-specific changes do not apply to the system. You can set this parameter when you provision a host or for a host group.
To set this parameter when provisioning a host, append --parameters fips_enabled=true
to the Hammer command.
$ hammer hostgroup set-parameter --name fips_enabled \
--value 'true' \
--hostgroup prod_servers
For more information, see the output of the command hammer hostgroup set-parameter --help
.
B.3. Verifying FIPS Mode is Enabled
To verify these FIPS compliance changes have been successful, you must provision a host and check its configuration.
-
Log on to the host as
root
or with an admin-level account. Enter the following command:
$ cat /proc/sys/crypto/fips_enabled
A value of
1
confirms that FIPS mode is enabled.
Appendix C. Building Cloud Images for Red Hat Satellite
Use this section to build and register images to Red Hat Satellite.
You can use a preconfigured Red Hat Enterprise Linux KVM guest QCOW2 image:
These images contain cloud-init
. To function properly, they must use ec2-compatible metadata services for provisioning an SSH key.
For the KVM guest images:
-
The
root
account in the image is disabled, butsudo
access is granted to a special user namedcloud-user
. -
There is no
root
password set for this image.
The root
password is locked in /etc/shadow
by placing !!
in the second field.
If you want to create custom Red Hat Enterprise Linux images, see Creating a Red Hat Enterprise Linux 7 Image and Creating a Red Hat Enterprise Linux 6 Image.
C.1. Creating Custom Red Hat Enterprise Linux Images
Prerequisites:
- Use a Linux host machine to create an image. In this example, we use a Red Hat Enterprise Linux 7 Workstation.
-
Use
virt-manager
on your workstation to complete this procedure. If you create the image on a remote server, connect to the server from your workstation withvirt-manager
. - A Red Hat Enterprise Linux 7 or 6 ISO file (see Red Hat Enterprise Linux 7.4 Binary DVD or Red Hat Enterprise Linux 6.9 Binary DVD).
For more information about installing a Red Hat Enterprise Linux Workstation, see Red Hat Enterprise Linux 7 Installation Guide.
Before you can create custom images, install the following packages:
Install
libvirt
,qemu-kvm
and graphical tools:[root@host]# yum install virt-manager virt-viewer libvirt qemu-kvm
Install the following command line tools:
[root@host]# yum install virt-install libguestfs-tools-c
In the following procedures, enter all commands with the [root@host]#
prompt on the workstation that hosts the libvirt
environment.
C.2. Creating a Red Hat Enterprise Linux 7 Image
Use this section to create an image in the QCOW2 format using a Red Hat Enterprise Linux 7 ISO file.
-
Using your web browser, download the Red Hat Enterprise Linux binary ISO file to a temporary location, for example, the
Downloads
directory. Copy the Red Hat Enterprise Linux binary ISO file to the
/var/lib/libvirt/images/
directory.[root@host]# cp ~/home/user/Downloads/rhel-server-7.4-x86_64-dvd.iso /var/lib/libvirt/images/
Verify that virtbr0 is the virtual bridge:
[root@host]# ip a
Start
libvirtd
:[root@host]# systemctl start libvirtd
Navigate to the
/var/lib/libvirt/images/
directory:[root@host]# cd /var/lib/libvirt/images/
Prepare the QEMU image:
[root@host]# qemu-img create -f qcow2 rhel7.qcow2 8G
Start the installation using
virt-install
. Use the following example as a guide:[root@host]# virt-install --virt-type qemu --name rhel7 --ram 2048 \ --cdrom rhel-server-7.4-x86_64-dvd.iso \ --disk rhel7.qcow2,format=qcow2 \ --network=bridge:virbr0 --graphics vnc,listen=0.0.0.0 \ --noautoconsole --os-type=linux --os-variant=rhel7
NoteFor GUI users, if the instance does not launch automatically, enter the
virt-manager
command to view the console:[root@host]# virt-manager
Follow the steps of the Red Hat Enterprise Linux installation wizard.
-
For the installation source, add an HTTP link to your repository in Red Hat Satellite, for example
satellite.example.com/pub/export/RHEL7/content/dist/rhel/server/7/7Server/x86_64/os/
- For the type of devices your installation uses, select Auto-detected installation media.
- For the type of installation destination, select Local Standard Disks.
- For other storage options, select Automatically configure partitioning.
- For software selection, select Minimal Install.
- Set the network interface to ON to ensure the interface activates on system start.
- Enter a host name, and click Apply.
-
Enter a
root
password.
-
For the installation source, add an HTTP link to your repository in Red Hat Satellite, for example
- When the installation completes, reboot the instance and log in as the root user.
Confirm that the network interface is up and that the IP address is assigned:
# ip a
Confirm that the hostname is correct:
# hostname
Create a
/etc/NetworkManager/conf.d/XX-cloud-image.conf
file where XX is a two-digit number that indicates order of precedence. Add the following contents to the file:[main] dns=none
- Proceed to Configuring a Host for Registration.
C.3. Creating a Red Hat Enterprise Linux 6 Image
Use this section to create an image in the QCOW2 format using a Red Hat Enterprise Linux 6 ISO file.
Start the installation using
virt-install
:[root@host]# qemu-img create -f qcow2 rhel6.qcow2 4G [root@host]# virt-install --connect=qemu:///system --network=bridge:virbr0 \ --name=rhel6 --os-type linux --os-variant rhel6 \ --disk path=rhel6.qcow2,format=qcow2,size=10,cache=none \ --ram 4096 --vcpus=2 --check-cpu --accelerate \ --hvm --cdrom=rhel-server-6.8-x86_64-dvd.iso
This launches an instance and starts the installation process.
NoteIf the instance does not launch automatically, enter the
virt-viewer
command to view the console:[root@host]# virt-viewer rhel6
Set up the virtual machines as follows:
- At the initial Installer boot menu, select the Install or upgrade an existing system option.
- Select the appropriate Language and Keyboard options.
- When prompted about which type of devices your installation uses, select Basic Storage Devices.
-
Select a
hostname
for your device. The default host name islocalhost.localdomain
. - Set a root password.
- Based on the space on the disk, select the type of installation.
- Select the Basic Server install, which includes an SSH server.
-
Reboot the instance and log in as the
root
user. Update the
/etc/sysconfig/network-scripts/ifcfg-eth0
file so it only contains the following values:TYPE=Ethernet DEVICE=eth0 ONBOOT=yes BOOTPROTO=dhcp NM_CONTROLLED=no
Restart the service network:
# service network restart
- Proceed to Configuring a Host for Registration.
C.4. Configuring a Host for Registration
Red Hat Enterprise Linux virtual machines register to Customer Portal Subscription Management by default. You must update each virtual machine configuration so that they receive updates from the correct Satellite Server or Capsule Server.
Prerequisites
Hosts must be using the following Red Hat Enterprise Linux version:
- 6.4 or later
- 7.0 or later
- All architectures of Red Hat Enterprise Linux are supported (i386, x86_64, s390x, ppc_64).
Ensure that a time synchronization tool is enabled and runs on the Satellite Servers, any Capsule Servers, and the hosts.
For Red Hat Enterprise Linux 6:
# chkconfig ntpd on; service ntpd start
For Red Hat Enterprise Linux 7:
# systemctl enable chronyd; systemctl start chronyd
Ensure that the daemon
rhsmcertd
is enabled and running on the hosts.For Red Hat Enterprise Linux 6:
# chkconfig rhsmcertd on; service rhsmcertd start
For Red Hat Enterprise Linux 7:
# systemctl start rhsmcertd
To Configure a Host for Registration:
- Take note of the fully qualified domain name (FQDN) of the Satellite Server or Capsule Server, for example server.example.com.
- On the host, connect to a terminal on the host as the root user
Install the consumer RPM from the Satellite Server or Capsule Server to which the host is to be registered. The consumer RPM updates the content source location of the host and allows the host to download content from the content source specified in Red Hat Satellite.
# rpm -Uvh http://server.example.com/pub/katello-ca-consumer-latest.noarch.rpm
C.5. Registering a Host
Prerequisites
-
Ensure that an activation key that is associated with the appropriate content view and environment exists for the host. For more information, see Managing Activation Keys in the Content Management Guide. By default, an activation key has the
auto-attach
function enabled. The feature is commonly used with hosts used as hypervisors. Ensure that the version of the
subscription-manager
utility is 1.10 or higher. The package is available in the standard Red Hat Enterprise Linux repository.- On the Red Hat Enterprise Linux Workstation, connect to a terminal as the root user.
Register the host using Red Hat Subscription Manager:
# subscription-manager register --org="My_Organization" --activationkey="MyKey"
You can use the --environment
option to override the content view and life cycle environment defined by the activation key. For example, to register a host to the content view "MyView" in a "Development" life cycle environment:
# subscription-manager register --org="My_Organization" \ --environment=Development/MyView \ --activationkey="MyKey"
For Red Hat Enterprise Linux 6.3 hosts, the release version defaults to Red Hat Enterprise Linux 6 Server and must point to the 6.3 repository.
- On Red Hat Satellite, select Hosts > Content Hosts.
- Select the name of the host that needs to be changed.
- In the Content Host Content section click the edit icon to the right of Release Version.
- Select "6.3" from the Release Version drop-down menu.
- Click Save.
C.6. Installing the Katello Agent
Use the following procedure to install the Katello agent on a host registered to Satellite 6. The katello-agent
package depends on the gofer package that provides the goferd service
. This service must be enabled so that the Red Hat Satellite Server or Capsule Server can provide information about errata that are applicable for content hosts.
The Katello agent is deprecated and will be removed in a future Satellite version. Migrate your workloads to use the remote execution feature to update clients remotely. For more information, see Installing the Katello Agent in the Managing Hosts Guide.
Prerequisites
The Satellite Tools 6.8 repository must be enabled, synchronized to the Satellite Server, and made available to your hosts as it provides the required packages. For more information about enabling Satellite Tools 6.8, see Installing the Katello Agent in Managing Hosts.
To Install the Katello Agent
Install the
katello-agent
RPM package using the following command:# yum install katello-agent
Ensure goferd is running:
# systemctl start goferd
C.7. Installing the Puppet Agent
Use this section to install and configure the Puppet agent on a host. When you have correctly installed and configured the Puppet agent, you can navigate to Hosts > All hosts to list all hosts visible to Red Hat Satellite Server.
Install the Puppet agent RPM package using the following command:
# yum install puppet
Configure the puppet agent to start at boot:
On Red Hat Enterprise Linux 6:
# chkconfig puppet on
On Red Hat Enterprise Linux 7:
# systemctl enable puppet
C.8. Completing the Red Hat Enterprise Linux 7 image
Update the system:
# {package-update}
Install the
cloud-init
packages:# yum install cloud-utils-growpart cloud-init
Open the
/etc/cloud/cloud.cfg
configuration file:# vi /etc/cloud/cloud.cfg
Under the heading
cloud_init_modules
, add:- resolv-conf
The
resolv-conf
option automatically configures theresolv.conf
when an instance boots for the first time. This file contains information related to the instance such asnameservers
,domain
and other options.Open the
/etc/sysconfig/network
file:# vi /etc/sysconfig/network
Add the following line to avoid problems accessing the EC2 metadata service:
NOZEROCONF=yes
Un-register the virtual machine so that the resulting image does not contain the same subscription details for every instance cloned based on it:
# subscription-manager repos --disable=* # subscription-manager unregister
Power off the instance:
# poweroff
On your Red Hat Enterprise Linux Workstation, connect to the terminal as the root user and navigate to the
/var/lib/libvirt/images/
directory:[root@host]# cd /var/lib/libvirt/images/
Reset and clean the image using the
virt-sysprep
command so it can be used to create instances without issues:[root@host]# virt-sysprep -d rhel7
Reduce image size using the
virt-sparsify
command. This command converts any free space within the disk image back to free space within the host:[root@host]# virt-sparsify --compress rhel7.qcow2 rhel7-cloud.qcow2
This creates a new
rhel7-cloud.qcow2
file in the location where you enter the command.
C.9. Completing the Red Hat Enterprise Linux 6 image
Update the system:
# {package-update}
Install the
cloud-init
packages:# yum install cloud-utils-growpart cloud-init
Edit the
/etc/cloud/cloud.cfg
configuration file and undercloud_init_modules
add:- resolv-conf
The
resolv-conf
option automatically configures theresolv.conf
configuration file when an instance boots for the first time. This file contains information related to the instance such asnameservers
,domain
, and other options.To prevent network issues, create the
/etc/udev/rules.d/75-persistent-net-generator.rules
file as follows:# echo "#" > /etc/udev/rules.d/75-persistent-net-generator.rules
This prevents
/etc/udev/rules.d/70-persistent-net.rules
file from being created. If/etc/udev/rules.d/70-persistent-net.rules
is created, networking might not function properly when booting from snapshots (the network interface is created as "eth1" rather than "eth0" and IP address is not assigned).Add the following line to
/etc/sysconfig/network
to avoid problems accessing the EC2 metadata service:NOZEROCONF=yes
Un-register the virtual machine so that the resulting image does not contain the same subscription details for every instance cloned based on it:
# subscription-manager repos --disable=* # subscription-manager unregister # yum clean all
Power off the instance:
# poweroff
On your Red Hat Enterprise Linux Workstation, log in as root and reset and clean the image using the
virt-sysprep
command so it can be used to create instances without issues:[root@host]# virt-sysprep -d rhel6
Reduce image size using the
virt-sparsify
command. This command converts any free space within the disk image back to free space within the host:[root@host]# virt-sparsify --compress rhel6.qcow2 rhel6-cloud.qcow2
This creates a new
rhel6-cloud.qcow2
file in the location where you enter the command.NoteYou must manually resize the partitions of instances based on the image in accordance with the disk space in the flavor that is applied to the instance.
C.10. Next steps
- Repeat the procedures for every image that you want to provision with Satellite.
- Move the image to the location where you want to store for future use.