Chapter 5. Client Registration
In order for an application or service to utilize Red Hat Single Sign-On it has to register a client in Red Hat Single Sign-On. An admin can do this through the admin console (or admin REST endpoints), but clients can also register themselves through the Red Hat Single Sign-On client registration service.
The Client Registration Service provides built-in support for Red Hat Single Sign-On Client Representations, OpenID Connect Client Meta Data and SAML Entity Descriptors. The Client Registration Service endpoint is /realms/<realm>/clients-registrations/<provider>
.
The built-in supported providers
are:
- default - Red Hat Single Sign-On Client Representation (JSON)
- install - Red Hat Single Sign-On Adapter Configuration (JSON)
- openid-connect - OpenID Connect Client Metadata Description (JSON)
- saml2-entity-descriptor - SAML Entity Descriptor (XML)
The following sections will describe how to use the different providers.
5.1. Authentication
To invoke the Client Registration Services you usually need a token. The token can be a bearer token, an initial access token or a registration access token. There is an alternative to register new client without any token as well, but then you need to configure Client Registration Policies (see below).
5.1.1. Bearer Token
The bearer token can be issued on behalf of a user or a Service Account. The following permissions are required to invoke the endpoints (see Server Administration Guide for more details):
- create-client or manage-client - To create clients
- view-client or manage-client - To view clients
- manage-client - To update or delete client
If you are using a bearer token to create clients it’s recommend to use a token from a Service Account with only the create-client
role (see Server Administration Guide for more details).
5.1.2. Initial Access Token
The recommended approach to registering new clients is by using initial access tokens. An initial access token can only be used to create clients and has a configurable expiration as well as a configurable limit on how many clients can be created.
An initial access token can be created through the admin console. To create a new initial access token first select the realm in the admin console, then click on Realm Settings
in the menu on the left, followed by Client Registration
in the tabs displayed in the page. Then finally click on Initial Access Tokens
sub-tab.
You will now be able to see any existing initial access tokens. If you have access you can delete tokens that are no longer required. You can only retrieve the value of the token when you are creating it. To create a new token click on Create
. You can now optionally add how long the token should be valid, also how many clients can be created using the token. After you click on Save
the token value is displayed.
It is important that you copy/paste this token now as you won’t be able to retrieve it later. If you forget to copy/paste it, then delete the token and create another one.
The token value is used as a standard bearer token when invoking the Client Registration Services, by adding it to the Authorization header in the request. For example:
Authorization: bearer eyJhbGciOiJSUz...
5.1.3. Registration Access Token
When you create a client through the Client Registration Service the response will include a registration access token. The registration access token provides access to retrieve the client configuration later, but also to update or delete the client. The registration access token is included with the request in the same way as a bearer token or initial access token. Registration access tokens are only valid once when it’s used the response will include a new token.
If a client was created outside of the Client Registration Service it won’t have a registration access token associated with it. You can create one through the admin console. This can also be useful if you loose the token for a particular client. To create a new token find the client in the admin console and click on Credentials
. Then click on Generate registration access token
.
5.2. Red Hat Single Sign-On Representations
The default
client registration provider can be used to create, retrieve, update and delete a client. It uses Red Hat Single Sign-On Client Representation format which provides support for configuring clients exactly as they can be configured through the admin console, including for example configuring protocol mappers.
To create a client create a Client Representation (JSON) then perform an HTTP POST request to /realms/<realm>/clients-registrations/default
.
It will return a Client Representation that also includes the registration access token. You should save the registration access token somewhere if you want to retrieve the config, update or delete the client later.
To retrieve the Client Representation perform an HTTP GET request to /realms/<realm>/clients-registrations/default/<client id>
.
It will also return a new registration access token.
To update the Client Representation perform an HTTP PUT request with the updated Client Representation to: /realms/<realm>/clients-registrations/default/<client id>
.
It will also return a new registration access token.
To delete the Client Representation perform an HTTP DELETE request to: /realms/<realm>/clients-registrations/default/<client id>
5.3. Red Hat Single Sign-On Adapter Configuration
The installation
client registration provider can be used to retrieve the adapter configuration for a client. In addition to token authentication you can also authenticate with client credentials using HTTP basic authentication. To do this include the following header in the request:
Authorization: basic BASE64(client-id + ':' + client-secret)
To retrieve the Adapter Configuration then perfrom an HTTP GET request to /realms/<realm>/clients-registrations/install/<client id>
.
No authentication is required for public clients. This means that for the JavaScript adapter you can load the client configuration directly from Red Hat Single Sign-On using the above URL.
5.4. OpenID Connect Dynamic Client Registration
Red Hat Single Sign-On implements OpenID Connect Dynamic Client Registration, which extends OAuth 2.0 Dynamic Client Registration Protocol and OAuth 2.0 Dynamic Client Registration Management Protocol.
The endpoint to use these specifications to register clients in Red Hat Single Sign-On is /realms/<realm>/clients-registrations/openid-connect[/<client id>]
.
This endpoints can also be found in the OpenID Connect Discovery endpoint for the realm, /realms/<realm>/.well-known/openid-configuration
.
5.5. SAML Entity Descriptors
The SAML Entity Descriptor endpoint only supports using SAML v2 Entity Descriptors to create clients. It doesn’t support retrieving, updating or deleting clients. For those operations the Red Hat Single Sign-On representation endpoints should be used. When creating a client a Red Hat Single Sign-On Client Representation is returned with details about the created client, including a registration access token.
To create a client perform an HTTP POST request with the SAML Entity Descriptor to /realms/<realm>/clients-registrations/saml2-entity-descriptor
.
5.6. Example using CURL
The following example creates a client with the clientId myclient
using CURL. You need to replace eyJhbGciOiJSUz…
with a proper initial access token or bearer token.
curl -X POST \ -d '{ "clientId": "myclient" }' \ -H "Content-Type:application/json" \ -H "Authorization: bearer eyJhbGciOiJSUz..." \ http://localhost:8080/auth/realms/master/clients-registrations/default
5.7. Example using Java Client Registration API
The Client Registration Java API makes it easy to use the Client Registration Service using Java. To use include the dependency org.keycloak:keycloak-client-registration-api:>VERSION<
from Maven.
For full instructions on using the Client Registration refer to the JavaDocs. Below is an example of creating a client. You need to replace eyJhbGciOiJSUz…
with a proper initial access token or bearer token.
String token = "eyJhbGciOiJSUz..."; ClientRepresentation client = new ClientRepresentation(); client.setClientId(CLIENT_ID); ClientRegistration reg = ClientRegistration.create() .url("http://localhost:8080/auth", "myrealm") .build(); reg.auth(Auth.token(token)); client = reg.create(client); String registrationAccessToken = client.getRegistrationAccessToken();
5.8. Client Registration Policies
Red Hat Single Sign-On currently supports 2 ways how can be new clients registered through Client Registration Service.
-
Authenticated requests - Request to register new client must contain either
Initial Access Token
orBearer Token
as mentioned above. - Anonymous requests - Request to register new client doesn’t need to contain any token at all
Anonymous client registration requests are very interesting and powerful feature, however you usually don’t want that anyone is able to register new client without any limitations. Hence we have Client Registration Policy SPI
, which provide a way to limit who can register new clients and under which conditions.
In Red Hat Single Sign-On admin console, you can click to Client Registration
tab and then Client Registration Policies
sub-tab. Here you will see what policies are configured by default for anonymous requests and what policies are configured for authenticated requests.
The anonymous requests (requests without any token) are allowed just for creating (registration) of new clients. So when you register new client through anonymous request, the response will contain Registration Access Token, which must be used for Read, Update or Delete request of particular client. However using this Registration Access Token from anonymous registration will be then subject to Anonymous Policy too! This means that for example request for update client also needs to come from Trusted Host if you have Trusted Hosts
policy. Also for example it won’t be allowed to disable Consent Required
when updating client and when Consent Required
policy is present etc.
Currently we have these policy implementations:
-
Trusted Hosts Policy - You can configure list of trusted hosts and trusted domains. Request to Client Registration Service can be sent just from those hosts or domains. Request sent from some untrusted IP will be rejected. URLs of newly registered client must also use just those trusted hosts or domains. For example it won’t be allowed to set
Redirect URI
of client pointing to some untrusted host. By default, there is not any whitelisted host, so anonymous client registration is de-facto disabled by default. -
Consent Required Policy - Newly registered clients will have
Consent Allowed
switch enabled. So after successful authentication, user will always see consent screen when he needs to approve personal info and permissions (protocol mappers and roles). It means that client won’t have access to any personal info or permission of user unless user approves it. - Protocol Mappers Policy - Allows to configure list of whitelisted protocol mapper implementations. New client can’t be registered or updated if it contains some non-whitelisted protocol mapper. Note that this policy is used for authenticated requests as well, so even for authenticated request there are some limitations which protocol mappers can be used.
-
Client Template Policy - Allow to whitelist
Client Templates
, which can be used with newly registered or updated clients. There are no whitelisted templates by default. -
Full Scope Policy - Newly registered clients will have
Full Scope Allowed
switch disabled. This means they won’t have any scoped realm roles or client roles of other clients. - Max Clients Policy - Rejects registration if current number of clients in the realm is same or bigger than specified limit. It’s 200 by default for anonymous registrations.
- Client Disabled Policy - Newly registered client will be disabled. This means that admin needs to manually approve and enable all newly registered clients. This policy is not used by default even for anonymous registration.