2.2. Migrating the Data Warehouse Service to a Separate Machine

1. Enable the required repositories:

   1. Register your system with the Content Delivery Network, entering your Customer Portal user name and password when prompted:

      # subscription-manager register

   2. Find the Red Hat Virtualization Manager subscription pool and record the pool ID:

      # subscription-manager list --available

   3. Use the pool ID to attach the subscription to the system:

      # subscription-manager attach --pool=pool_id

   4. Configure the repositories:

      # subscription-manager repos \
          --disable='*' \
          --enable=rhel-8-for-x86_64-baseos-eus-rpms \
          --enable=rhel-8-for-x86_64-appstream-eus-rpms \
          --enable=rhv-4.4-manager-for-rhel-8-x86_64-rpms \
          --enable=fast-datapath-for-rhel-8-x86_64-rpms \
          --enable=jb-eap-7.4-for-rhel-8-x86_64-rpms
      
      # subscription-manager release --set=8.6

2. Enable the pki-deps module.

   # dnf module -y enable pki-deps

3. Ensure that all packages currently installed are up to date:

   # dnf upgrade --nobest

4. Install the ovirt-engine-dwh-setup package:

   # dnf install ovirt-engine-dwh-setup

Procedure

1. Stop the Data Warehouse service:

   # systemctl stop ovirt-engine-dwhd.service

2. If the database is hosted on a remote machine, you must manually grant access by editing the postgres.conf file. Edit the /var/lib/pgsql/data/postgresql.conf file and modify the listen_addresses line so that it matches the following:

   listen_addresses = '*'

   If the line does not exist or has been commented out, add it manually.

   If the database is hosted on the Manager machine and was configured during a clean setup of the Red Hat Virtualization Manager, access is granted by default.

3. Restart the postgresql service:

   # systemctl restart postgresql

1. If you are migrating both the ovirt_engine_history database and the Data Warehouse service to the same machine, run the following, otherwise proceed to the next step.

   # sed -i '/^ENGINE_DB_/d' \
           /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-database.conf
   
   # sed -i \
        -e 's;^\(OVESETUP_ENGINE_CORE/enable=bool\):True;\1:False;' \
        -e '/^OVESETUP_CONFIG\/fqdn/d' \
        /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf

2. Remove the apache/grafana PKI files, so that they are regenerated by engine-setup with correct values:

   # rm -f \
     /etc/pki/ovirt-engine/certs/apache.cer \
     /etc/pki/ovirt-engine/certs/apache-grafana.cer \
     /etc/pki/ovirt-engine/keys/apache.key.nopass \
     /etc/pki/ovirt-engine/keys/apache-grafana.key.nopass \
     /etc/pki/ovirt-engine/apache-ca.pem \
     /etc/pki/ovirt-engine/apache-grafana-ca.pem

3. Run the engine-setup command to begin configuration of Data Warehouse on the machine:

   # engine-setup

4. Press Enter to accept the automatically detected host name, or enter an alternative host name and press Enter:

   Host fully qualified DNS name of this server [autodetected host name]:

5. Press Enter to automatically configure the firewall, or type No and press Enter to maintain existing settings:

   Setup can automatically configure the firewall on this system.
   Note: automatic configuration of the firewall may overwrite current settings.
   Do you want Setup to configure the firewall? (Yes, No) [Yes]:

   If you choose to automatically configure the firewall, and no firewall managers are active, you are prompted to select your chosen firewall manager from a list of supported options. Type the name of the firewall manager and press Enter. This applies even in cases where only one option is listed.

6. Enter the fully qualified domain name and password for the Manager. Press Enter to accept the default values in each other field:

   Host fully qualified DNS name of the engine server []: engine-fqdn
   Setup needs to do some actions on the remote engine server. Either automatically, using ssh as root to access it, or you will be prompted to manually perform each such action.
   Please choose one of the following:
   1 - Access remote engine server using ssh as root
   2 - Perform each action manually, use files to copy content around
   (1, 2) [1]:
   ssh port on remote engine server [22]:
   root password on remote engine server engine-fqdn: password

7. Enter the FQDN and password for the Manager database machine. Press Enter to accept the default values in each other field:

   Engine database host []: manager-db-fqdn
   Engine database port [5432]:
   Engine database secured connection (Yes, No) [No]:
   Engine database name [engine]:
   Engine database user [engine]:
   Engine database password: password

8. Confirm your installation settings:

   Please confirm installation settings (OK, Cancel) [OK]:

Procedure

1. On the Manager machine, restart the Manager:

   # service ovirt-engine restart

2. Run the following command to modify the file /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf and set the options to False:

   # sed -i \
        -e 's;^\(OVESETUP_DWH_CORE/enable=bool\):True;\1:False;' \
        -e 's;^\(OVESETUP_DWH_CONFIG/remoteEngineConfigured=bool\):True;\1:False;' \
        /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf
   
   # sed -i \
        -e 's;^\(OVESETUP_GRAFANA_CORE/enable=bool\):True;\1:False;' \
        /etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf

3. Disable the Data Warehouse service:

   # systemctl disable ovirt-engine-dwhd.service

4. Remove the Data Warehouse files:

   # rm -f /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/*.conf /var/lib/ovirt-engine-dwh/backups/*