Red Hat Summit Red Hat SummitApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

4.3. Setting up NFS

4.3.1. Setting up a Kerberized NFS Server
Copiar enlace

  1. If the NFS host machine has not been added as a client to the IPA domain, then create the host entry.
  2. Create the NFS service entry in the IPA domain.
  3. Generate an NFS service keytab for the NFS server. If this command is run on the NFS server, then save the keys directly to the host keytab. For example: 
    # ipa-getkeytab -s server.example.com -p nfs/nfs-server.example.com -k /etc/krb5.keytab -e des-cbc-crc
    Copy to Clipboard Toggle word wrap

    Note

    Only DES keys are supported on Red Hat Enterprise Linux 5.
    If this command is run on a different machine:
    1. Save the keytab to a temporary file. For example: 
      ... -k /tmp/nfs.keytab
      Copy to Clipboard Toggle word wrap
    2. Copy the keytabs over to the NFS machine.
    3. Set the file permissions to 0700.
    4. On the NFS host machine, add the service key to the keytab file. 
      #  (  echo rkt /tmp/nfs.keytab; echo wkt /etc/krb5.keytab) |ktutil
      Copy to Clipboard Toggle word wrap
  4. Install the NFS packages. For example: 
    # yum install nfs-utils
    Copy to Clipboard Toggle word wrap
  5. Edit the krb5.conf file to allow weak crypto. This is required for every NFS client if any client in the domain will use older encryption options like DES. 
    # vim /etc/krb5.conf

allow_weak_crypto = true
    Copy to Clipboard Toggle word wrap
  6. Edit the NFS server configuration to use NFSv4 security by uncommenting the SECURE_NFS line. 
    # vim /etc/sysconfig/nfs

SECURE_NFS="yes"
    Copy to Clipboard Toggle word wrap
  7. If the NFS server and client are in different DNS domains, then configure the NFS domain. 
    # vim /etc/idmapd.conf

Domain = example.com
    Copy to Clipboard Toggle word wrap
  8. Edit the /etc/exports file and add the Kerberos information: 
    /export  *(rw,sec=sys:krb5:krb5i:krb5p)
    Copy to Clipboard Toggle word wrap
  9. Restart the NFS server. 
    # service nfs restart
    Copy to Clipboard Toggle word wrap
  10. Configure the NFS server as an NFS client, following the directions in Section 4.3.2, “Setting up a Kerberized NFS Client”.

4.3.2. Setting up a Kerberized NFS Client
Copiar enlace

  1. If the NFS client is not enrolled as a client in the IPA domain, then set up the required host entries.
    1. Create the host entry.
    2. Generate host keytab for the NFS client. If this command is run on the NFS clien, then save the keys directly to the host keytab. For example: 
      # ipa-getkeytab -p host/nfs-client-server.example.com@EXAMPLE.COM -k /etc/krb5.keytab -e des-cbc-crc
      Copy to Clipboard Toggle word wrap

      Note

      Only DES keys are supported on Red Hat Enterprise Linux 5.
      If this command is run on a different machine:
      1. Save the keytab to a temporary file. For example: 
        ... -k /tmp/nfs.keytab
        Copy to Clipboard Toggle word wrap
      2. Copy the keytabs over to the NFS machine.
      3. Set the file permissions to 0700.
      4. On the NFS host machine, add the service key to the keytab file. 
        # ( echo rkt /root/nfs-client.keytab; echo wkt /etc/krb5.keytab) |ktutil
        Copy to Clipboard Toggle word wrap
  2. Edit the krb5.conf file to allow weak crypto. This is required for every client if any client in the domain will use older encryption options like DES. 
    # vim /etc/krb5.conf

allow_weak_crypto = true
    Copy to Clipboard Toggle word wrap
  3. Edit the NFS common configuration to enable client-side secure NFS, by uncommenting the SECURE_NFS line. 
    # vim /etc/sysconfig/nfs

SECURE_NFS="yes"
    Copy to Clipboard Toggle word wrap
  4. If the NFS server and client are in different DNS domains, then configure the NFS domain. The idmapd.conf must be the same on the NFS client as it is on the NFS server. 
    # vim /etc/idmapd.conf

Domain = example.com
    Copy to Clipboard Toggle word wrap
  5. Start the GSS daemon. 
    # service rpc.gssd start
    Copy to Clipboard Toggle word wrap
  6. Mount the directory. 
    # echo "$NFSSERVER:/this /mnt/this nfs4 sec=krb5i,rw,proto=tcp,port=2049"  >>/etc/fstab
# mount -av
    Copy to Clipboard Toggle word wrap
Volver arriba
Red Hat logoGithubredditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar. Explore nuestras recientes actualizaciones.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

Theme

© 2025 Red Hat