Inicio
Productos
Red Hat Enterprise Linux
5
Virtualization Guide
9.3. Configuring persistent storage in Red Hat Enterprise Linux 5

9.3. Configuring persistent storage in Red Hat Enterprise Linux 5

This section is for systems with external or networked storage; that is, Fibre Channel or iSCSI based storage devices. It is recommended that those systems have persistent device names configured for your hosts. This assists live migration as well as providing consistent device names and storage for multiple virtualized systems.

Universally Unique Identifiers(UUIDs) are a standardized method for identifying computers and devices in distributed computing environments. This sections uses UUIDs to identify iSCSI or Fibre Channel LUNs. UUIDs persist after restarts, disconnection and device swaps. The UUID is similar to a label on the device.

Systems which are not running multipath must use Single path configuration. Systems running multipath can use Multiple path configuration.

Single path configuration

This procedure implements LUN device persistence using udev. Only use this procedure for hosts which are not using multipath.

Edit the /etc/scsi_id.config file.
1. Ensure the options=-b is line commented out.
  # options=-b
  Copy to Clipboard Toggle word wrap
2. Add the following line:
```
options=-g
```
```
options=-g
```
  Copy to Clipboard Toggle word wrap
  This option configures udev to assume all attached SCSI devices return a UUID.
To display the UUID for a given device run the scsi_id -g -s /block/sd* command. For example:
```
scsi_id -g -s /block/sd*
```
```
# scsi_id -g -s /block/sd*
3600a0b800013275100000015427b625e
```
Copy to Clipboard Toggle word wrap
The output may vary from the example above. The output displays the UUID of the device /dev/sdc.
Verify the UUID output by the scsi_id -g -s /block/sd* command is identical from computer which accesses the device.
Create a rule to name the device. Create a file named 20-names.rules in the /etc/udev/rules.d directory. Add new rules to this file. All rules are added to the same file using the same format. Rules follow this format:
```
KERNEL=="sd[a-z]", BUS=="scsi", PROGRAM="/sbin/scsi_id -g -s /block/%k", RESULT="UUID", NAME="devicename"
```
```
KERNEL=="sd[a-z]", BUS=="scsi", PROGRAM="/sbin/scsi_id -g -s /block/%k", RESULT="UUID", NAME="devicename"
```
Copy to Clipboard Toggle word wrap
Replace UUID and devicename with the UUID retrieved above, and a name for the device. This is a rule for the example above:
```
KERNEL="sd*", BUS="scsi", PROGRAM="/sbin/scsi_id -g -s", RESULT="3600a0b800013275100000015427b625e", NAME="rack4row16"
```
```
KERNEL="sd*", BUS="scsi", PROGRAM="/sbin/scsi_id -g -s", RESULT="3600a0b800013275100000015427b625e", NAME="rack4row16"
```
Copy to Clipboard Toggle word wrap
The udev daemon now searches all devices named /dev/sd* for the UUID in the rule. Once a matching device is connected to the system the device is assigned the name from the rule. In the a device with a UUID of 3600a0b800013275100000015427b625e would appear as /dev/rack4row16.
Append this line to /etc/rc.local:
```
/sbin/start_udev
```
```
/sbin/start_udev
```
Copy to Clipboard Toggle word wrap
Copy the changes in the /etc/scsi_id.config, /etc/udev/rules.d/20-names.rules, and /etc/rc.local files to all relevant hosts.
```
/sbin/start_udev
```
```
/sbin/start_udev
```
Copy to Clipboard Toggle word wrap

Networked storage devices with configured rules now have persistent names on all hosts where the files were updated This means you can migrate guests between hosts using the shared storage and the guests can access the storage devices in their configuration files.

Multiple path configuration

The multipath package is used for systems with more than one physical path from the computer to storage devices. multipath provides fault tolerance, fail-over and enhanced performance for network storage devices attached to Red Hat Enterprise Linux systems.

Implementing LUN persistence in a multipath environment requires defined alias names for your multipath devices. Each storage device has a UUID which acts as a key for the aliased names. Identify a device's UUID using the scsi_id command.

scsi_id -g -s /block/sdc

# scsi_id -g -s /block/sdc

Copy to Clipboard

Toggle word wrap

The multipath devices will be created in the /dev/mpath directory. In the example below 4 devices are defined in /etc/multipath.conf:

multipaths { 
	multipath { 
	wwid		3600805f30015987000000000768a0019 
	alias		oramp1 
	} 
	multipath { 
	wwid		3600805f30015987000000000d643001a 
	alias		oramp2 
	} 
	mulitpath { 
	wwid		3600805f3001598700000000086fc001b 
	alias		oramp3 
	} 
	mulitpath { 
	wwid		3600805f300159870000000000984001c 
	alias		oramp4 
	} 
}

multipaths { 
	multipath { 
	wwid		3600805f30015987000000000768a0019 
	alias		oramp1 
	} 
	multipath { 
	wwid		3600805f30015987000000000d643001a 
	alias		oramp2 
	} 
	mulitpath { 
	wwid		3600805f3001598700000000086fc001b 
	alias		oramp3 
	} 
	mulitpath { 
	wwid		3600805f300159870000000000984001c 
	alias		oramp4 
	} 
}

Copy to Clipboard

Toggle word wrap

This configuration will create 4 LUNs named /dev/mpath/oramp1, /dev/mpath/oramp2, /dev/mpath/oramp3 and /dev/mpath/oramp4. Once entered, the mapping of the devices' WWID to their new names are now persistent after rebooting.

Volver arriba

9.3. Configuring persistent storage in Red Hat Enterprise Linux 5

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Hacer que el código abierto sea más inclusivo

Acerca de Red Hat

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links