Red Hat Summit Red Hat SummitApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

Chapter 12. Using CPU Manager

12.1. What CPU Manager Does
Copiar enlace

CPU Manager manages groups of CPUs and constrains workloads to specific CPUs.

CPU Manager is useful for workloads that have some of these attributes:

  • Require as much CPU time as possible.
  • Are sensitive to processor cache misses.
  • Are low-latency network applications.
  • Coordinate with other processes and benefit from sharing a single processor cache.

12.2. Setting up CPU Manager
Copiar enlace

To set up CPU Manager:

  1. Optionally, label a node: 

    # oc label node perf-node.example.com cpumanager=true
    Copy to Clipboard Toggle word wrap

  2. Enable CPU manager support on the target node: 

    # oc edit configmap <name> -n openshift-node
    Copy to Clipboard Toggle word wrap

    For example: 

    # oc edit cm node-config-compute -n openshift-node
...
kubeletArguments:
...
  feature-gates:
  - CPUManager=true
  cpu-manager-policy:
  - static
  cpu-manager-reconcile-period:
  - 5s
  kube-reserved:
    1 
    
  - cpu=500m

# systemctl restart atomic-openshift-node
    Copy to Clipboard Toggle word wrap
    1
    kube-reserved is a required setting. The value may need to be adjusted depending on your environment.

  3. Create a pod that requests a core or multiple cores. Both limits and requests must have their CPU value set to a whole integer. That is the number of cores that will be dedicated to this pod: 

    # cat cpumanager.yaml
apiVersion: v1
kind: Pod
metadata:
  generateName: cpumanager-
spec:
  containers:
  - name: cpumanager
    image: gcr.io/google_containers/pause-amd64:3.0
    resources:
      requests:
        cpu: 1
        memory: "1G"
      limits:
        cpu: 1
        memory: "1G"
  nodeSelector:
    cpumanager: "true"
    Copy to Clipboard Toggle word wrap

  4. Create the pod: 

    # oc create -f cpumanager.yaml
    Copy to Clipboard Toggle word wrap

  5. Verify that the pod is scheduled to the node that you labeled: 

    # oc describe pod cpumanager
Name:         cpumanager-4gdtn
Namespace:    test
Node:         perf-node.example.com/172.31.62.105
...
    Limits:
      cpu:     1
      memory:  1G
    Requests:
      cpu:        1
      memory:     1G
...
QoS Class:       Guaranteed
Node-Selectors:  cpumanager=true
                 region=primary
    Copy to Clipboard Toggle word wrap

  6. Verify that the cgroups are set up correctly. Get the PID of the pause process: 

    # systemd-cgls -l
├─1 /usr/lib/systemd/systemd --system --deserialize 20
├─kubepods.slice
│ ├─kubepods-pod0ec1ab8b_e1c4_11e7_bb22_027b30990a24.slice
│ │ ├─docker-b24e29bc4021064057f941dc5f3538595c317d294f2c8e448b5e61a29c026d1c.scope
│ │ │ └─44216 /pause
    Copy to Clipboard Toggle word wrap

    Pods of QoS tier Guaranteed are placed within the kubepods.slice. Pods of other QoS tiers end up in child cgroups of kubepods. 

    # cd /sys/fs/cgroup/cpuset/kubepods.slice/kubepods-pod0ec1ab8b_e1c4_11e7_bb22_027b30990a24.slice/docker-b24e29bc4021064057f941dc5f3538595c317d294f2c8e448b5e61a29c026d1c.scope
# for i in `ls cpuset.cpus tasks` ; do echo -n "$i "; cat $i ; done
cpuset.cpus 2
tasks 44216
    Copy to Clipboard Toggle word wrap

  7. Check the allowed CPU list for the task: 

    # grep ^Cpus_allowed_list /proc/44216/status
Cpus_allowed_list:      2
    Copy to Clipboard Toggle word wrap

  8. Verify that another pod (in this case, the pod in the burstable QoS tier) on the system can not run on the core allocated for the Guaranteed pod: 

    # cat /sys/fs/cgroup/cpuset/kubepods.slice/kubepods-burstable.slice/kubepods-burstable-podbe76ff22_dead_11e7_b99e_027b30990a24.slice/docker-da621bea7569704fc39f84385a179923309ab9d832f6360cccbff102e73f9557.scope/cpuset.cpus
0-1,3
    Copy to Clipboard Toggle word wrap 
    # oc describe node perf-node.example.com
...
Capacity:
 cpu:     4
 memory:  16266720Ki
 pods:    40
Allocatable:
 cpu:     3500m
 memory:  16164320Ki
 pods:    40
---
  Namespace                  Name                      CPU Requests  CPU Limits  Memory Requests  Memory Limits
  ---------                  ----                      ------------  ----------  ---------------  -------------
  test                        cpumanager-4gdtn          1 (28%)       1 (28%)     1G (6%)          1G (6%)
  test                        cpumanager-hczts          1 (28%)       1 (28%)     1G (6%)          1G (6%)
  test                        cpumanager-r9wrq          1 (28%)       1 (28%)     1G (6%)          1G (6%)
...
Allocated resources:
  (Total limits may be over 100 percent, i.e., overcommitted.)
  CPU Requests  CPU Limits  Memory Requests  Memory Limits
  ------------  ----------  ---------------  -------------
  3 (85%)       3 (85%)     5437500k (32%)   9250M (55%)
    Copy to Clipboard Toggle word wrap

    This VM has four CPU cores. You set kube-reserved to 500 millicores, meaning half of one core is subtracted from the total capacity of the node to arrive at the Node Allocatable amount.

    You can see that Allocatable CPU is 3500 millicores. This means we can run three of our CPU manager pods since each will take one whole core. A whole core is equivalent to 1000 millicores.

    If you try to schedule a fourth pod, the system will accept the pod, but it will never be scheduled: 

    # oc get pods --all-namespaces |grep test
test              cpumanager-4gdtn               1/1       Running            0          8m
test              cpumanager-hczts               1/1       Running            0          8m
test              cpumanager-nb9d5               0/1       Pending            0          8m
test              cpumanager-r9wrq               1/1       Running            0          8m
    Copy to Clipboard Toggle word wrap
Volver arriba
Red Hat logoGithubredditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar. Explore nuestras recientes actualizaciones.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

Theme

© 2025 Red Hat