Red Hat Summit Red Hat SummitApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

Chapter 6. Downgrading OpenShift

6.1. Overview
Copiar enlace

Following an OpenShift Container Platform upgrade, it may be desirable in extreme cases to downgrade your cluster to a previous version. The following sections outline the required steps for each system in a cluster to perform such a downgrade for the OpenShift Container Platform 3.3 to 3.2 downgrade path.

Warning

These steps are currently only supported for RPM-based installations of OpenShift Container Platform and assumes downtime of the entire cluster.

6.2. Verifying Backups
Copiar enlace

The Ansible playbook used during the upgrade process should have created a backup of the master-config.yaml file and the etcd data directory. Ensure these exist on your masters and etcd members: 

/etc/origin/master/master-config.yaml.<timestamp>
/var/lib/origin/etcd-backup-<timestamp>
Copy to Clipboard Toggle word wrap

Also, back up the node-config.yaml file on each node (including masters, which have the node component on them) with a timestamp: 

/etc/origin/node/node-config.yaml.<timestamp>
Copy to Clipboard Toggle word wrap

If you use a separate etcd cluster instead of a single embedded etcd instance, the backup is likely created on all etcd members, though only one is required for the recovery process. You can run a separate etcd instance that is co-located with your master nodes.

The RPM downgrade process in a later step should create .rpmsave backups of the following files, but it may be a good idea to keep a separate copy regardless: 

/etc/sysconfig/atomic-openshift-master
/etc/etcd/etcd.conf
1
Copy to Clipboard Toggle word wrap
1
Only required if using a separate etcd cluster.

6.3. Shutting Down the Cluster
Copiar enlace

On all masters, nodes, and etcd members, if you use a separate etcd cluster that runs on different nodes, ensure the relevant services are stopped.

On the master in a single master cluster: 

# systemctl stop atomic-openshift-master
Copy to Clipboard Toggle word wrap

On each master in a multi-master cluster: 

# systemctl stop atomic-openshift-master-api
# systemctl stop atomic-openshift-master-controllers
Copy to Clipboard Toggle word wrap

On all master and node hosts: 

# systemctl stop atomic-openshift-node
Copy to Clipboard Toggle word wrap

On any etcd hosts for a separate etcd cluster: 

# systemctl stop etcd
Copy to Clipboard Toggle word wrap

6.4. Removing RPMs
Copiar enlace

  1. The *-excluder packages add entries to the exclude directive in the host’s /etc/yum.conf file when installed. Run the following command on each host to remove the atomic-openshift-* and docker packages from the exclude list: 

    # atomic-openshift-excluder unexclude
# atomic-openshift-docker-excluder unexclude
    Copy to Clipboard Toggle word wrap

  2. On all masters, nodes, and etcd members, if you use a separate etcd cluster that runs on different nodes, remove the following packages: 

    # yum remove atomic-openshift \
    atomic-openshift-clients \
    atomic-openshift-node \
    atomic-openshift-master \
    openvswitch \
    atomic-openshift-sdn-ovs \
    tuned-profiles-atomic-openshift-node\
    atomic-openshift-excluder \
    atomic-openshift-docker-excluder
    Copy to Clipboard Toggle word wrap

  3. If you use a separate etcd cluster, also remove the etcd package: 

    # yum remove etcd
    Copy to Clipboard Toggle word wrap

    If using the embedded etcd, leave the etcd package installed. It is required for running the etcdctl command to issue operations in later steps.

6.5. Downgrading Docker
Copiar enlace

OpenShift Container Platform 3.2 requires Docker 1.9.1 and also supports Docker 1.10.3.

Downgrade to Docker 1.9.1 on each host using the following steps:

  1. Remove all local containers and images on the host. Any pods backed by a replication controller will be recreated.

    Warning

    The following commands are destructive and should be used with caution.

    Delete all containers: 

    # docker rm $(docker ps -a -q)
    Copy to Clipboard Toggle word wrap

    Delete all images: 

    # docker rmi $(docker images -q)
    Copy to Clipboard Toggle word wrap

  2. Use yum swap (instead of yum downgrade) to install Docker 1.9.1: 

    # yum swap docker-* docker-*1.9.1
# sed -i 's/--storage-opt dm.use_deferred_deletion=true//' /etc/sysconfig/docker-storage
# systemctl restart docker
    Copy to Clipboard Toggle word wrap

  3. You should now have Docker 1.9.1 installed and running on the host. Verify with the following: 

    # docker version
Client:
 Version:      1.9.1-el7
 API version:  1.20
 Package Version: docker-1.9.1-10.el7.x86_64
[...]

# systemctl status docker
● docker.service - Docker Application Container Engine
   Loaded: loaded (/usr/lib/systemd/system/docker.service; enabled; vendor preset: disabled)
   Active: active (running) since Wed 2017-06-21 15:44:20 EDT; 30min ago
[...]
    Copy to Clipboard Toggle word wrap

6.6. Reinstalling RPMs
Copiar enlace

  1. Disable the OpenShift Container Platform 3.3 repositories, and re-enable the 3.2 repositories: 

    # subscription-manager repos \
    --disable=rhel-7-server-ose-3.3-rpms \
    --enable=rhel-7-server-ose-3.2-rpms
    Copy to Clipboard Toggle word wrap

  2. On each master, install the following packages: 

    # yum install atomic-openshift \
    atomic-openshift-clients \
    atomic-openshift-node \
    atomic-openshift-master \
    openvswitch \
    atomic-openshift-sdn-ovs \
    tuned-profiles-atomic-openshift-node \
    atomic-openshift-excluder \
    atomic-openshift-docker-excluder
    Copy to Clipboard Toggle word wrap

  3. On each node, install the following packages: 

    # yum install atomic-openshift \
    atomic-openshift-node \
    openvswitch \
    atomic-openshift-sdn-ovs \
    tuned-profiles-atomic-openshift-node \
    atomic-openshift-excluder \
    atomic-openshift-docker-excluder
    Copy to Clipboard Toggle word wrap

  4. If you use a separate etcd cluster, install the following package on each etcd member: 

    # yum install etcd
    Copy to Clipboard Toggle word wrap

6.7. Bringing OpenShift Container Platform Services Back Online
Copiar enlace

See Backup and Restore.

6.8. Verifying the Downgrade
Copiar enlace

  1. To verify the downgrade, first check that all nodes are marked as Ready: 

    # oc get nodes
NAME                        STATUS                     AGE
master.example.com          Ready,SchedulingDisabled   165d
node1.example.com           Ready                      165d
node2.example.com           Ready                      165d
    Copy to Clipboard Toggle word wrap

  2. Then, verify that you are running the expected versions of the docker-registry and router images, if deployed: 

    # oc get -n default dc/docker-registry -o json | grep \"image\"
    "image": "openshift3/ose-docker-registry:v3.2.1.34-5",
# oc get -n default dc/router -o json | grep \"image\"
    "image": "openshift3/ose-haproxy-router:v3.2.1.34-5",
    Copy to Clipboard Toggle word wrap

  3. You can use the diagnostics tool on the master to look for common issues and provide suggestions: 

    # oc adm diagnostics
...
[Note] Summary of diagnostics execution:
[Note] Completed with no errors or warnings seen.
    Copy to Clipboard Toggle word wrap
Volver arriba
Red Hat logoGithubredditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar. Explore nuestras recientes actualizaciones.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

Theme

© 2025 Red Hat