Red Hat SummitThis documentation is for a release that is no longer maintained
See documentation for the latest supported version 3 or the latest supported version 4.Este contenido no está disponible en el idioma seleccionado.
Chapter 32. Revision History: Installation and Configuration
32.1. Wed Mar 07 2018
| Affected Topic | Description of Change |
|---|---|
| Added to instructions to scale EFK pods when changes are made in the Understanding and Adjusting the Deployment section. |
32.2. Tue Nov 21 2017
| Affected Topic | Description of Change |
|---|---|
| Added a new section on installing a Single Master and Node on One System. |
32.3. Fri Nov 03 2017
| Affected Topic | Description of Change |
|---|---|
| Added a note on limiting how long pods can run and a link to RunOnceDuration plugin. |
32.4. Mon Oct 16 2017
| Affected Topic | Description of Change |
|---|---|
| Clarified required port for VIP and added note that HAProxy router is not for production environments in Multiple Masters Example. | |
|
Upgrading a Cluster | Added a step in Preparing for a Manual Upgrade section to obtain the latest image stream. |
|
Upgrading a Cluster | Added a step in Preparing for an Automated Upgrade section to obtain the latest image stream. |
32.5. Wed Oct 11 2017
| Affected Topic | Description of Change |
|---|---|
|
Added the | |
| Added the Configuring Registry Storage section. |
32.6. Fri Sep 22 2017
| Affected Topic | Description of Change |
|---|---|
| Added a note that the default HAProxy load balancer is intended for non-production environments. | |
|
Added information on manually provisioning a user and identity when using the | |
|
Removed the deprecated | |
|
Added a note to the Syncing Images section about the need for | |
| Added a note to the Redeploying Certificates section about certificate expiration. |
32.7. Mon Sep 18 2017
| Affected Topic | Description of Change |
|---|---|
| Added to the Prerequisites and Supportability section with supportability information. | |
| Added an F5 support statement | |
| Updated commands for registry installation. | |
| Updated commands for registry installation and added steps to use a ConfigMap not secrets to override registry defaults. | |
| Updated commands for registry installation. |
32.8. Wed Sep 06 2017
| Affected Topic | Description of Change |
|---|---|
| Added information on needing separate DNS entries for routing shards to the Using Router Shards section. |
32.9. Mon Aug 28 2017
| Affected Topic | Description of Change |
|---|---|
| Corrected the link to the logging yaml file example in the Specifying Logging Ansible Variables section. | |
|
Expanded | |
|
Added |
32.10. Fri Aug 25 2017
| Affected Topic | Description of Change |
|---|---|
|
Setting up the Registry | Removed Technology Preview notice from the Deploying the Registry as a DaemonSet section. |
32.11. Tue Aug 15 2017
| Affected Topic | Description of Change |
|---|---|
| Added information on configuring the default ports used by the master API and web console. |
32.12. Tue Aug 08 2017
| Affected Topic | Description of Change |
|---|---|
| Added new section on how to manually redeploy the router certificates. | |
| Added information about configuring Neutron to the Using Flannel section. |
32.13. Fri Jul 28 2017
| Affected Topic | Description of Change |
|---|---|
| Added the Redeploying a New etcd CA section. |
32.14. Thu Jul 27 2017
| Affected Topic | Description of Change |
|---|---|
|
Added the | |
| Added a note about whitelisting users. | |
|
Updated Section 2.6.9, “Known Issues”Known Issues] to remove | |
| Added steps to the Securing the Registry section on configuring your cluster to trust the certificate at the OS level. |
32.15. Wed Jul 12 2017
| Affected Topic | Description of Change |
|---|---|
|
Replaced the deprecated | |
|
Replaced the deprecated |
32.16. Thu Jul 06 2017
| Affected Topic | Description of Change |
|---|---|
| New topic on enabling controller-managed attachment and detachment. |
32.17. Tue Jun 13 2017
| Affected Topic | Description of Change |
|---|---|
| Added a step to verify that the etcd package is installed, if you installed multiple etcd hosts. |
32.18. Wed May 31 2017
| Affected Topic | Description of Change |
|---|---|
|
Configuring Persistent Storage | New topic on provisioning a OpenShift Container Platform cluster with persistent storage using Azure File. |
|
Installing a Cluster | Updated to use OpenShift Container Registry name and add clarification on the distinction between Atomic Registry. |
32.19. Thu May 25 2017
| Affected Topic | Description of Change |
|---|---|
| Noted that after making changes to an identity provider, you must restart the master service for the changes to take effect. | |
|
Configuring Persistent Storage | Added the Prerequisites section. |
| Added the The Azure Configuration File section and some file example fixes. | |
| Added the Using Maven Behind a Proxy section. |
32.20. Mon May 15 2017
| Affected Topic | Description of Change |
|---|---|
| Added clarification that nodes and masters are forward and backward compatible across one minor version. | |
|
Added information about |
32.21. Mon May 08 2017
| Affected Topic | Description of Change |
|---|---|
| Updated the Configuring Schedulability on Masters section to note that masters are automatically marked unschedulable by default by the installer. | |
|
Updated the Configuring Node Host Labels section to better describe the special | |
| Added a Configuring Deployment Type section. |
32.22. Tue Apr 25 2017
| Affected Topic | Description of Change |
|---|---|
| Updated for new set of playbooks and options. |
32.23. Wed Apr 12 2017
| Affected Topic | Description of Change |
|---|---|
| Added graphics to the Using Router Shards section. | |
| Expanded details in the Rebuilding Your Router section. | |
| Specified the UDP for port 4789. | |
| In the Known Issues multiple masters discussion, included the docker-common package in the removal process, following a failed setup play. | |
|
Added |
32.24. Fri Apr 07 2017
| Affected Topic | Description of Change |
|---|---|
| Removed workaround for atomic-openshift-docker-excluder package upgrades. (BZ#1430929) | |
32.25. Mon Apr 03 2017
| Affected Topic | Description of Change |
|---|---|
|
Added the | |
| Added a new section on configuring the verbosity of journald log messages. | |
| Added a Configuring Cluster Logging section. | |
|
Upgrading a Cluster | Added a NOTE box about verifying the cluster health before upgrading. |
|
Upgrading a Cluster | Added a NOTE box about verifying the cluster health before upgrading. |
| Updated the list of supported registry storage drivers in the Storage section. | |
|
Setting Up a Registry | Added list of supported registry storage drivers to the Storage for the Registry section. |
| Added Registry and Router Certificates section with instructions on redeploying these certificates manually. | |
| Enhanced and re-organized entire topic for clarity. |
32.26. Mon Mar 27 2017
| Affected Topic | Description of Change |
|---|---|
| Moved the procedure for restoring etcd to the Backup and Restore topic. | |
|
Setting up a Router | New topic on configuring the HAProxy router to use the PROXY protocol. |
32.27. Wed Mar 22 2017
| Affected Topic | Description of Change |
|---|---|
| Added a workaround for atomic-openshift-docker-excluder package upgrades. (BZ#1430929) | |
32.28. Mon Mar 20 2017
| Affected Topic | Description of Change |
|---|---|
| Added Network Time Protocol (NTP) as a prerequisite. | |
|
Added information on using the | |
| Updated the Installing on Containerized Hosts topic to promote the information on installing on containerized hosts. | |
|
Added paragraph about the | |
|
Added | |
|
Added information about the |
32.29. Tue Mar 14 2017
| Affected Topic | Description of Change |
|---|---|
|
Renamed instances of | |
| Added information about disconnected installation of the stand-alone registry. | |
|
Setting up the Registry | Added footnotes to the example file in the Use Amazon S3 as a Storage Back-end section. |
| Added note recommending moving off NFS for production in the Image Push Errors with Scaled Registry Using Shared NFS Volume section. | |
|
Updated the example in the Deploying the F5 Router section to reflect | |
|
Upgrading a Cluster | Removed a repetitive step within the Updating the Default Image Streams and Templates section. |
| Added the procedure for upgrading the operating system. | |
|
Configuring Persistent Storage | Added note about managing volumes using Heketi to the Dedicated Storage Gluster section. |
|
Removed the | |
| Added step to enable view permissions for Hawkular Metrics Deployer Service Account section. |
32.30. Mon Mar 06 2017
| Affected Topic | Description of Change |
|---|---|
| Updated Before You Begin section to raise minimal Ansible version to 2.2.0. | |
| Provided guidance for preconfigured loadbalancers for OpenShift Container Platform with high availability. | |
|
Clarified that | |
| Added the Checking Certificate Expirations section. | |
|
Added a Warning admonition recommending the use of the default value for |
32.31. Thu Feb 16 2017
| Affected Topic | Description of Change |
|---|---|
| Added the cluster image to the Syncing Images section. | |
| Added the Filtering Routes to Specific Routers section. | |
| Arranged the topic and added a Prerequisites section. | |
|
Setting up the Registry | Added additional URL instructions to the Deploying the Registry Console section. |
|
Added a step for adding the public route host name in the | |
| Fixed the options for creating a configuration file in the Creating New Configuration Files section. | |
|
Added details about | |
| Fixed example in the Configuring Fluentd to Send Logs to an External Log Aggregator section. | |
| Added a version variable and <tag> to code block example in Deploying the EFK Stack section to display the correct current version to use. |
32.32. Thu Feb 09 2017
| Affected Topic | Description of Change |
|---|---|
| Added an Important admonition about an etcd performance issue. | |
32.33. Mon Feb 06 2017
| Affected Topic | Description of Change |
|---|---|
| Updated file paths to the logging and metrics deployer templates to their new OpenShift Container Platform 3.4 locations. | |
|
Setting up the Registry | |
|
Added steps on using | |
| Added the Configuring a Registry Location section. | |
|
Setting up the Registry | Added Important admonition about shutting down Cockpit to the Non-Production Use section. |
| Arranged the Securing the Registry Console section to include information on the certificate. | |
| Arranged the topic to create the Creating a Router section, and added a paragraph on router options on creation. | |
| Added a new Setting Up F5 Native Integration section. | |
| Added the Configuring Nuage SDN topic. | |
|
Persistent Storage Examples | Added a link to the Complete Example of Dynamic Provisioning Using GlusterFS. |
| Clarified that, if using a service, the endpoints name must match the service name. | |
| Updated Cluster Metrics sizing recommendations for the new version of OpenShift Container Platform. | |
| Removed information about Pipelines being a feature in Technology Preview. |
32.34. Mon Jan 30 2017
| Affected Topic | Description of Change |
|---|---|
|
Removed references to the deprecated | |
| Clarified custom certificate configuration locations in the Configuring Custom Certificates section. |
32.35. Wed Jan 25 2017
| Affected Topic | Description of Change |
|---|---|
| Added step to Proxying Docker Pull for finding the registry service IP. | |
|
Removed references to the deprecated | |
| Added information about required ports for Aggregated Logging. | |
| Added notes to explain additional values in the /etc/origin/master/master-config.yaml file in the Manually Setting Global Build Defaults section. | |
| Updated scale testing guidelines. | |
| Added information about setting extension properties. | |
|
Configuring Persistent Storage | Added additional details to the glusterfs-storageclass.yaml file example in the GlusterFS Object Definition section. |
| Updated the Audit Configuration section description and added Audit Configuration Parameters. |
32.36. Wed Jan 18 2017
OpenShift Container Platform 3.4 initial release.
| Affected Topic | Description of Change |
|---|---|
| Added sizing guidelines for etcd service nodes within the Minimum Hardware Requirements table. | |
| Added a Note admonition about mounting secrets to service accounts. | |
|
Updated with new | |
| Added the ARP Cache Tuning for Large-scale Clusters section. | |
| Added information about security caveats and ownership claims of host names and subdomains. | |
| Added a new Using Wildcard Routes (for a Subdomain) section. | |
|
Updated quick installer instructions to use the new | |
|
Clarified the difference between | |
| New topic on how OpenShift Container Platform can be configured to access an Azure infrastructure, including using Azure disk as persistent storage] for application data. | |
|
Configuring Persistent Storage | New topic on how to provision your OpenShift Container Platform cluster with persistent storage using Azure. |
|
Persistent Storage Examples | New topic providing an end-to-end example of how to dynamically provision GlusterFS volumes. |
| Added information about setting up an external Jenkins server. | |
| Added examples for node selectors in build configurations. | |
|
Removed | |
| Added image label example to build file examples. | |
|
Noted that for | |
|
Updated with new | |
|
Added clarification regarding ConfigMaps and output of | |
| Added the Configuring Catalog Categories section. |
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}